qemu/block/backup.c

438 lines
13 KiB
C
Raw Normal View History

block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
/*
* QEMU backup
*
* Copyright (C) 2013 Proxmox Server Solutions
*
* Authors:
* Dietmar Maurer (dietmar@proxmox.com)
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include "trace.h"
#include "block/block.h"
#include "block/block_int.h"
#include "block/blockjob.h"
#include "qemu/ratelimit.h"
#define BACKUP_CLUSTER_BITS 16
#define BACKUP_CLUSTER_SIZE (1 << BACKUP_CLUSTER_BITS)
#define BACKUP_SECTORS_PER_CLUSTER (BACKUP_CLUSTER_SIZE / BDRV_SECTOR_SIZE)
#define SLICE_TIME 100000000ULL /* ns */
typedef struct CowRequest {
int64_t start;
int64_t end;
QLIST_ENTRY(CowRequest) list;
CoQueue wait_queue; /* coroutines blocked on this request */
} CowRequest;
typedef struct BackupBlockJob {
BlockJob common;
BlockDriverState *target;
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
MirrorSyncMode sync_mode;
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
RateLimit limit;
BlockdevOnError on_source_error;
BlockdevOnError on_target_error;
CoRwlock flush_rwlock;
uint64_t sectors_read;
HBitmap *bitmap;
QLIST_HEAD(, CowRequest) inflight_reqs;
} BackupBlockJob;
/* See if in-flight requests overlap and wait for them to complete */
static void coroutine_fn wait_for_overlapping_requests(BackupBlockJob *job,
int64_t start,
int64_t end)
{
CowRequest *req;
bool retry;
do {
retry = false;
QLIST_FOREACH(req, &job->inflight_reqs, list) {
if (end > req->start && start < req->end) {
qemu_co_queue_wait(&req->wait_queue);
retry = true;
break;
}
}
} while (retry);
}
/* Keep track of an in-flight request */
static void cow_request_begin(CowRequest *req, BackupBlockJob *job,
int64_t start, int64_t end)
{
req->start = start;
req->end = end;
qemu_co_queue_init(&req->wait_queue);
QLIST_INSERT_HEAD(&job->inflight_reqs, req, list);
}
/* Forget about a completed request */
static void cow_request_end(CowRequest *req)
{
QLIST_REMOVE(req, list);
qemu_co_queue_restart_all(&req->wait_queue);
}
static int coroutine_fn backup_do_cow(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
bool *error_is_read)
{
BackupBlockJob *job = (BackupBlockJob *)bs->job;
CowRequest cow_request;
struct iovec iov;
QEMUIOVector bounce_qiov;
void *bounce_buffer = NULL;
int ret = 0;
int64_t start, end;
int n;
qemu_co_rwlock_rdlock(&job->flush_rwlock);
start = sector_num / BACKUP_SECTORS_PER_CLUSTER;
end = DIV_ROUND_UP(sector_num + nb_sectors, BACKUP_SECTORS_PER_CLUSTER);
trace_backup_do_cow_enter(job, start, sector_num, nb_sectors);
wait_for_overlapping_requests(job, start, end);
cow_request_begin(&cow_request, job, start, end);
for (; start < end; start++) {
if (hbitmap_get(job->bitmap, start)) {
trace_backup_do_cow_skip(job, start);
continue; /* already copied */
}
trace_backup_do_cow_process(job, start);
n = MIN(BACKUP_SECTORS_PER_CLUSTER,
job->common.len / BDRV_SECTOR_SIZE -
start * BACKUP_SECTORS_PER_CLUSTER);
if (!bounce_buffer) {
bounce_buffer = qemu_blockalign(bs, BACKUP_CLUSTER_SIZE);
}
iov.iov_base = bounce_buffer;
iov.iov_len = n * BDRV_SECTOR_SIZE;
qemu_iovec_init_external(&bounce_qiov, &iov, 1);
ret = bdrv_co_readv(bs, start * BACKUP_SECTORS_PER_CLUSTER, n,
&bounce_qiov);
if (ret < 0) {
trace_backup_do_cow_read_fail(job, start, ret);
if (error_is_read) {
*error_is_read = true;
}
goto out;
}
if (buffer_is_zero(iov.iov_base, iov.iov_len)) {
ret = bdrv_co_write_zeroes(job->target,
start * BACKUP_SECTORS_PER_CLUSTER,
n, BDRV_REQ_MAY_UNMAP);
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
} else {
ret = bdrv_co_writev(job->target,
start * BACKUP_SECTORS_PER_CLUSTER, n,
&bounce_qiov);
}
if (ret < 0) {
trace_backup_do_cow_write_fail(job, start, ret);
if (error_is_read) {
*error_is_read = false;
}
goto out;
}
hbitmap_set(job->bitmap, start, 1);
/* Publish progress, guest I/O counts as progress too. Note that the
* offset field is an opaque progress value, it is not a disk offset.
*/
job->sectors_read += n;
job->common.offset += n * BDRV_SECTOR_SIZE;
}
out:
if (bounce_buffer) {
qemu_vfree(bounce_buffer);
}
cow_request_end(&cow_request);
trace_backup_do_cow_return(job, sector_num, nb_sectors, ret);
qemu_co_rwlock_unlock(&job->flush_rwlock);
return ret;
}
static int coroutine_fn backup_before_write_notify(
NotifierWithReturn *notifier,
void *opaque)
{
BdrvTrackedRequest *req = opaque;
int64_t sector_num = req->offset >> BDRV_SECTOR_BITS;
int nb_sectors = req->bytes >> BDRV_SECTOR_BITS;
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
assert((req->offset & (BDRV_SECTOR_SIZE - 1)) == 0);
assert((req->bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
return backup_do_cow(req->bs, sector_num, nb_sectors, NULL);
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
}
static void backup_set_speed(BlockJob *job, int64_t speed, Error **errp)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
if (speed < 0) {
error_set(errp, QERR_INVALID_PARAMETER, "speed");
return;
}
ratelimit_set_speed(&s->limit, speed / BDRV_SECTOR_SIZE, SLICE_TIME);
}
static void backup_iostatus_reset(BlockJob *job)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
bdrv_iostatus_reset(s->target);
}
static const BlockJobDriver backup_job_driver = {
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
.instance_size = sizeof(BackupBlockJob),
.job_type = BLOCK_JOB_TYPE_BACKUP,
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
.set_speed = backup_set_speed,
.iostatus_reset = backup_iostatus_reset,
};
static BlockErrorAction backup_error_action(BackupBlockJob *job,
bool read, int error)
{
if (read) {
return block_job_error_action(&job->common, job->common.bs,
job->on_source_error, true, error);
} else {
return block_job_error_action(&job->common, job->target,
job->on_target_error, false, error);
}
}
typedef struct {
int ret;
} BackupCompleteData;
static void backup_complete(BlockJob *job, void *opaque)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
BackupCompleteData *data = opaque;
bdrv_unref(s->target);
block_job_completed(job, data->ret);
g_free(data);
}
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
static void coroutine_fn backup_run(void *opaque)
{
BackupBlockJob *job = opaque;
BackupCompleteData *data;
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
BlockDriverState *bs = job->common.bs;
BlockDriverState *target = job->target;
BlockdevOnError on_target_error = job->on_target_error;
NotifierWithReturn before_write = {
.notify = backup_before_write_notify,
};
int64_t start, end;
int ret = 0;
QLIST_INIT(&job->inflight_reqs);
qemu_co_rwlock_init(&job->flush_rwlock);
start = 0;
end = DIV_ROUND_UP(job->common.len / BDRV_SECTOR_SIZE,
BACKUP_SECTORS_PER_CLUSTER);
job->bitmap = hbitmap_alloc(end, 0);
bdrv_set_enable_write_cache(target, true);
bdrv_set_on_error(target, on_target_error, on_target_error);
bdrv_iostatus_enable(target);
bdrv_add_before_write_notifier(bs, &before_write);
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
if (job->sync_mode == MIRROR_SYNC_MODE_NONE) {
while (!block_job_is_cancelled(&job->common)) {
/* Yield until the job is cancelled. We just let our before_write
* notify callback service CoW requests. */
job->common.busy = false;
qemu_coroutine_yield();
job->common.busy = true;
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
}
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
} else {
/* Both FULL and TOP SYNC_MODE's require copying.. */
for (; start < end; start++) {
bool error_is_read;
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
if (block_job_is_cancelled(&job->common)) {
break;
}
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
/* we need to yield so that bdrv_drain_all() returns.
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
* (without, VM does not reboot)
*/
if (job->common.speed) {
uint64_t delay_ns = ratelimit_calculate_delay(
&job->limit, job->sectors_read);
job->sectors_read = 0;
block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, delay_ns);
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
} else {
block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, 0);
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
}
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
if (block_job_is_cancelled(&job->common)) {
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
break;
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
}
if (job->sync_mode == MIRROR_SYNC_MODE_TOP) {
int i, n;
int alloced = 0;
/* Check to see if these blocks are already in the
* backing file. */
for (i = 0; i < BACKUP_SECTORS_PER_CLUSTER;) {
/* bdrv_is_allocated() only returns true/false based
* on the first set of sectors it comes across that
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
* are are all in the same state.
* For that reason we must verify each sector in the
* backup cluster length. We end up copying more than
* needed but at some point that is always the case. */
alloced =
bdrv_is_allocated(bs,
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
start * BACKUP_SECTORS_PER_CLUSTER + i,
BACKUP_SECTORS_PER_CLUSTER - i, &n);
i += n;
if (alloced == 1 || n == 0) {
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
break;
}
}
/* If the above loop never found any sectors that are in
* the topmost image, skip this backup. */
if (alloced == 0) {
continue;
}
}
/* FULL sync mode we copy the whole drive. */
ret = backup_do_cow(bs, start * BACKUP_SECTORS_PER_CLUSTER,
BACKUP_SECTORS_PER_CLUSTER, &error_is_read);
if (ret < 0) {
/* Depending on error action, fail now or retry cluster */
BlockErrorAction action =
backup_error_action(job, error_is_read, -ret);
if (action == BLOCK_ERROR_ACTION_REPORT) {
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
break;
} else {
start--;
continue;
}
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
}
}
}
notifier_with_return_remove(&before_write);
/* wait until pending backup_do_cow() calls have completed */
qemu_co_rwlock_wrlock(&job->flush_rwlock);
qemu_co_rwlock_unlock(&job->flush_rwlock);
hbitmap_free(job->bitmap);
bdrv_iostatus_disable(target);
bdrv_op_unblock_all(target, job->common.blocker);
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
data = g_malloc(sizeof(*data));
data->ret = ret;
block_job_defer_to_main_loop(&job->common, backup_complete, data);
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
}
void backup_start(BlockDriverState *bs, BlockDriverState *target,
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
int64_t speed, MirrorSyncMode sync_mode,
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
BlockCompletionFunc *cb, void *opaque,
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
Error **errp)
{
int64_t len;
assert(bs);
assert(target);
assert(cb);
if (bs == target) {
error_setg(errp, "Source and target cannot be the same");
return;
}
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
!bdrv_iostatus_is_enabled(bs)) {
error_set(errp, QERR_INVALID_PARAMETER, "on-source-error");
return;
}
if (!bdrv_is_inserted(bs)) {
error_setg(errp, "Device is not inserted: %s",
bdrv_get_device_name(bs));
return;
}
if (!bdrv_is_inserted(target)) {
error_setg(errp, "Device is not inserted: %s",
bdrv_get_device_name(target));
return;
}
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
return;
}
if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_BACKUP_TARGET, errp)) {
return;
}
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
len = bdrv_getlength(bs);
if (len < 0) {
error_setg_errno(errp, -len, "unable to get length for '%s'",
bdrv_get_device_name(bs));
return;
}
BackupBlockJob *job = block_job_create(&backup_job_driver, bs, speed,
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
cb, opaque, errp);
if (!job) {
return;
}
bdrv_op_block_all(target, job->common.blocker);
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
job->on_source_error = on_source_error;
job->on_target_error = on_target_error;
job->target = target;
Implement sync modes for drive-backup. This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:39:04 +04:00
job->sync_mode = sync_mode;
block: add basic backup support to block driver backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-24 19:13:11 +04:00
job->common.len = len;
job->common.co = qemu_coroutine_create(backup_run);
qemu_coroutine_enter(job->common.co, job);
}