qemu/hw/sparc64/sun4u.c

772 lines
24 KiB
C
Raw Normal View History

/*
* QEMU Sun4u/Sun4v System Emulator
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Fabien Chouteau <chouteau@adacore.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-12-armbru@redhat.com>
2018-02-03 11:43:12 +03:00
#include "qemu/error-report.h"
2016-03-14 11:01:28 +03:00
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "hw/hw.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bridge.h"
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
#include "hw/pci/pci_bus.h"
#include "hw/pci/pci_host.h"
#include "hw/pci-host/sabre.h"
#include "hw/i386/pc.h"
#include "hw/char/serial.h"
#include "hw/char/parallel.h"
#include "hw/timer/m48t59.h"
#include "hw/input/i8042.h"
#include "hw/block/fdc.h"
#include "net/net.h"
#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "hw/boards.h"
#include "hw/nvram/sun_nvram.h"
#include "hw/nvram/chrp_nvram.h"
#include "hw/sparc/sparc64.h"
#include "hw/nvram/fw_cfg.h"
#include "hw/sysbus.h"
#include "hw/ide.h"
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
#include "hw/ide/pci.h"
#include "hw/loader.h"
#include "elf.h"
#include "trace.h"
#define KERNEL_LOAD_ADDR 0x00404000
#define CMDLINE_ADDR 0x003ff000
#define PROM_SIZE_MAX (4 * MiB)
#define PROM_VADDR 0x000ffd00000ULL
#define PBM_SPECIAL_BASE 0x1fe00000000ULL
#define PBM_MEM_BASE 0x1ff00000000ULL
#define PBM_PCI_IO_BASE (PBM_SPECIAL_BASE + 0x02000000ULL)
#define PROM_FILENAME "openbios-sparc64"
#define NVRAM_SIZE 0x2000
#define MAX_IDE_BUS 2
#define BIOS_CFG_IOPORT 0x510
#define FW_CFG_SPARC64_WIDTH (FW_CFG_ARCH_LOCAL + 0x00)
#define FW_CFG_SPARC64_HEIGHT (FW_CFG_ARCH_LOCAL + 0x01)
#define FW_CFG_SPARC64_DEPTH (FW_CFG_ARCH_LOCAL + 0x02)
#define IVEC_MAX 0x40
struct hwdef {
uint16_t machine_id;
uint64_t prom_addr;
uint64_t console_serial_base;
};
typedef struct EbusState {
/*< private >*/
PCIDevice parent_obj;
ISABus *isa_bus;
qemu_irq isa_bus_irqs[ISA_NUM_IRQS];
uint64_t console_serial_base;
MemoryRegion bar0;
MemoryRegion bar1;
} EbusState;
#define TYPE_EBUS "ebus"
#define EBUS(obj) OBJECT_CHECK(EbusState, (obj), TYPE_EBUS)
static void fw_cfg_boot_set(void *opaque, const char *boot_device,
Error **errp)
{
fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
}
static int sun4u_NVRAM_set_params(Nvram *nvram, uint16_t NVRAM_size,
const char *arch, ram_addr_t RAM_size,
const char *boot_devices,
uint32_t kernel_image, uint32_t kernel_size,
const char *cmdline,
uint32_t initrd_image, uint32_t initrd_size,
uint32_t NVRAM_image,
int width, int height, int depth,
const uint8_t *macaddr)
{
unsigned int i;
int sysp_end;
uint8_t image[0x1ff0];
NvramClass *k = NVRAM_GET_CLASS(nvram);
memset(image, '\0', sizeof(image));
/* OpenBIOS nvram variables partition */
sysp_end = chrp_nvram_create_system_partition(image, 0);
/* Free space partition */
chrp_nvram_create_free_partition(&image[sysp_end], 0x1fd0 - sysp_end);
Sun_init_header((struct Sun_nvram *)&image[0x1fd8], macaddr, 0x80);
for (i = 0; i < sizeof(image); i++) {
(k->write)(nvram, i, image[i]);
}
return 0;
}
static uint64_t sun4u_load_kernel(const char *kernel_filename,
const char *initrd_filename,
ram_addr_t RAM_size, uint64_t *initrd_size,
uint64_t *initrd_addr, uint64_t *kernel_addr,
uint64_t *kernel_entry)
{
int linux_boot;
unsigned int i;
long kernel_size;
uint8_t *ptr;
uint64_t kernel_top;
linux_boot = (kernel_filename != NULL);
kernel_size = 0;
if (linux_boot) {
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_size = load_elf(kernel_filename, NULL, NULL, kernel_entry,
kernel_addr, &kernel_top, 1, EM_SPARCV9, 0, 0);
if (kernel_size < 0) {
*kernel_addr = KERNEL_LOAD_ADDR;
*kernel_entry = KERNEL_LOAD_ADDR;
kernel_size = load_aout(kernel_filename, KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR, bswap_needed,
TARGET_PAGE_SIZE);
}
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename,
KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR);
}
if (kernel_size < 0) {
hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Fabien Chouteau <chouteau@adacore.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-12-armbru@redhat.com>
2018-02-03 11:43:12 +03:00
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
/* load initrd above kernel */
*initrd_size = 0;
if (initrd_filename) {
*initrd_addr = TARGET_PAGE_ALIGN(kernel_top);
*initrd_size = load_image_targphys(initrd_filename,
*initrd_addr,
RAM_size - *initrd_addr);
if ((int)*initrd_size < 0) {
hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Fabien Chouteau <chouteau@adacore.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-12-armbru@redhat.com>
2018-02-03 11:43:12 +03:00
error_report("could not load initial ram disk '%s'",
initrd_filename);
exit(1);
}
}
if (*initrd_size > 0) {
for (i = 0; i < 64 * TARGET_PAGE_SIZE; i += TARGET_PAGE_SIZE) {
ptr = rom_ptr(*kernel_addr + i, 32);
if (ptr && ldl_p(ptr + 8) == 0x48647253) { /* HdrS */
stl_p(ptr + 24, *initrd_addr + *kernel_addr);
stl_p(ptr + 28, *initrd_size);
break;
}
}
}
}
return kernel_size;
}
typedef struct ResetData {
SPARCCPU *cpu;
uint64_t prom_addr;
} ResetData;
#define TYPE_SUN4U_POWER "power"
#define SUN4U_POWER(obj) OBJECT_CHECK(PowerDevice, (obj), TYPE_SUN4U_POWER)
typedef struct PowerDevice {
SysBusDevice parent_obj;
MemoryRegion power_mmio;
} PowerDevice;
/* Power */
static void power_mem_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
/* According to a real Ultra 5, bit 24 controls the power */
if (val & 0x1000000) {
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
}
}
static const MemoryRegionOps power_mem_ops = {
.write = power_mem_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static void power_realize(DeviceState *dev, Error **errp)
{
PowerDevice *d = SUN4U_POWER(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
memory_region_init_io(&d->power_mmio, OBJECT(dev), &power_mem_ops, d,
"power", sizeof(uint32_t));
sysbus_init_mmio(sbd, &d->power_mmio);
}
static void power_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = power_realize;
}
static const TypeInfo power_info = {
.name = TYPE_SUN4U_POWER,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(PowerDevice),
.class_init = power_class_init,
};
static void ebus_isa_irq_handler(void *opaque, int n, int level)
{
EbusState *s = EBUS(opaque);
qemu_irq irq = s->isa_bus_irqs[n];
/* Pass ISA bus IRQs onto their gpio equivalent */
trace_ebus_isa_irq_handler(n, level);
if (irq) {
qemu_set_irq(irq, level);
}
}
/* EBUS (Eight bit bus) bridge */
static void ebus_realize(PCIDevice *pci_dev, Error **errp)
{
EbusState *s = EBUS(pci_dev);
SysBusDevice *sbd;
DeviceState *dev;
qemu_irq *isa_irq;
DriveInfo *fd[MAX_FD];
int i;
s->isa_bus = isa_bus_new(DEVICE(pci_dev), get_system_memory(),
pci_address_space_io(pci_dev), errp);
if (!s->isa_bus) {
error_setg(errp, "unable to instantiate EBUS ISA bus");
isa: Clean up error handling around isa_bus_new() We can have at most one ISA bus. If you try to create another one, isa_bus_new() complains to stderr and returns null. isa_bus_new() is called in two contexts, machine's init() and device's realize() methods. Since complaining to stderr is not proper in the latter context, convert isa_bus_new() to Error. Machine's init(): * mips_jazz_init(), called from the init() methods of machines "magnum" and "pica" * mips_r4k_init(), the init() method of machine "mips" * pc_init1() called from the init() methods of non-q35 PC machines * typhoon_init(), called from clipper_init(), the init() method of machine "clipper" These callers always create the first ISA bus, hence isa_bus_new() can't fail. Simply pass &error_abort. Device's realize(): * i82378_realize(), of PCI device "i82378" * ich9_lpc_realize(), of PCI device "ICH9-LPC" * pci_ebus_realize(), of PCI device "ebus" * piix3_realize(), of PCI device "pci-piix3", abstract parent of "PIIX3" and "PIIX3-xen" * piix4_realize(), of PCI device "PIIX4" * vt82c686b_realize(), of PCI device "VT82C686B" Propagate the error. Note that these devices are typically created only by machine init() methods with qdev_init_nofail() or similar. If we screwed up and created an ISA bus before that call, we now give up right away. Before, we'd hobble on, and typically die in isa_bus_irqs(). Similar if someone finds a way to hot-plug one of these critters. Cc: Richard Henderson <rth@twiddle.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
2015-12-17 19:35:18 +03:00
return;
}
/* ISA bus */
isa_irq = qemu_allocate_irqs(ebus_isa_irq_handler, s, ISA_NUM_IRQS);
isa_bus_irqs(s->isa_bus, isa_irq);
qdev_init_gpio_out_named(DEVICE(s), s->isa_bus_irqs, "isa-irq",
ISA_NUM_IRQS);
/* Serial ports */
i = 0;
if (s->console_serial_base) {
serial_mm_init(pci_address_space(pci_dev), s->console_serial_base,
0, NULL, 115200, serial_hd(i), DEVICE_BIG_ENDIAN);
i++;
}
serial_hds_isa_init(s->isa_bus, i, MAX_ISA_SERIAL_PORTS);
/* Parallel ports */
parallel_hds_isa_init(s->isa_bus, MAX_PARALLEL_PORTS);
/* Keyboard */
isa_create_simple(s->isa_bus, "i8042");
/* Floppy */
for (i = 0; i < MAX_FD; i++) {
fd[i] = drive_get(IF_FLOPPY, 0, i);
}
dev = DEVICE(isa_create(s->isa_bus, TYPE_ISA_FDC));
if (fd[0]) {
qdev_prop_set_drive(dev, "driveA", blk_by_legacy_dinfo(fd[0]),
&error_abort);
}
if (fd[1]) {
qdev_prop_set_drive(dev, "driveB", blk_by_legacy_dinfo(fd[1]),
&error_abort);
}
qdev_prop_set_uint32(dev, "dma", -1);
qdev_init_nofail(dev);
/* Power */
dev = qdev_create(NULL, TYPE_SUN4U_POWER);
qdev_init_nofail(dev);
sbd = SYS_BUS_DEVICE(dev);
memory_region_add_subregion(pci_address_space_io(pci_dev), 0x7240,
sysbus_mmio_get_region(sbd, 0));
/* PCI */
pci_dev->config[0x04] = 0x06; // command = bus master, pci mem
pci_dev->config[0x05] = 0x00;
pci_dev->config[0x06] = 0xa0; // status = fast back-to-back, 66MHz, no error
pci_dev->config[0x07] = 0x03; // status = medium devsel
pci_dev->config[0x09] = 0x00; // programming i/f
pci_dev->config[0x0D] = 0x0a; // latency_timer
memory_region_init_alias(&s->bar0, OBJECT(s), "bar0", get_system_io(),
0, 0x1000000);
pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->bar0);
memory_region_init_alias(&s->bar1, OBJECT(s), "bar1", get_system_io(),
0, 0x8000);
pci_register_bar(pci_dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->bar1);
}
static Property ebus_properties[] = {
DEFINE_PROP_UINT64("console-serial-base", EbusState,
console_serial_base, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void ebus_class_init(ObjectClass *klass, void *data)
{
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->realize = ebus_realize;
k->vendor_id = PCI_VENDOR_ID_SUN;
k->device_id = PCI_DEVICE_ID_SUN_EBUS;
k->revision = 0x01;
k->class_id = PCI_CLASS_BRIDGE_OTHER;
dc->props = ebus_properties;
}
static const TypeInfo ebus_info = {
.name = TYPE_EBUS,
.parent = TYPE_PCI_DEVICE,
.class_init = ebus_class_init,
.instance_size = sizeof(EbusState),
pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-27 22:56:34 +03:00
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ },
},
};
#define TYPE_OPENPROM "openprom"
#define OPENPROM(obj) OBJECT_CHECK(PROMState, (obj), TYPE_OPENPROM)
typedef struct PROMState {
SysBusDevice parent_obj;
MemoryRegion prom;
} PROMState;
static uint64_t translate_prom_address(void *opaque, uint64_t addr)
{
hwaddr *base_addr = (hwaddr *)opaque;
return addr + *base_addr - PROM_VADDR;
}
/* Boot PROM (OpenBIOS) */
static void prom_init(hwaddr addr, const char *bios_name)
{
DeviceState *dev;
SysBusDevice *s;
char *filename;
int ret;
dev = qdev_create(NULL, TYPE_OPENPROM);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, addr);
/* load boot prom */
if (bios_name == NULL) {
bios_name = PROM_FILENAME;
}
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
ret = load_elf(filename, translate_prom_address, &addr,
NULL, NULL, NULL, 1, EM_SPARCV9, 0, 0);
if (ret < 0 || ret > PROM_SIZE_MAX) {
ret = load_image_targphys(filename, addr, PROM_SIZE_MAX);
}
g_free(filename);
} else {
ret = -1;
}
if (ret < 0 || ret > PROM_SIZE_MAX) {
hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Fabien Chouteau <chouteau@adacore.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-12-armbru@redhat.com>
2018-02-03 11:43:12 +03:00
error_report("could not load prom '%s'", bios_name);
exit(1);
}
}
static void prom_realize(DeviceState *ds, Error **errp)
{
PROMState *s = OPENPROM(ds);
SysBusDevice *dev = SYS_BUS_DEVICE(ds);
Error *local_err = NULL;
memory_region_init_ram_nomigrate(&s->prom, OBJECT(ds), "sun4u.prom",
PROM_SIZE_MAX, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
vmstate_register_ram_global(&s->prom);
memory_region_set_readonly(&s->prom, true);
sysbus_init_mmio(dev, &s->prom);
}
static Property prom_properties[] = {
{/* end of property list */},
};
static void prom_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->props = prom_properties;
dc->realize = prom_realize;
}
static const TypeInfo prom_info = {
.name = TYPE_OPENPROM,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(PROMState),
.class_init = prom_class_init,
};
#define TYPE_SUN4U_MEMORY "memory"
#define SUN4U_RAM(obj) OBJECT_CHECK(RamDevice, (obj), TYPE_SUN4U_MEMORY)
typedef struct RamDevice {
SysBusDevice parent_obj;
MemoryRegion ram;
uint64_t size;
} RamDevice;
/* System RAM */
static void ram_realize(DeviceState *dev, Error **errp)
{
RamDevice *d = SUN4U_RAM(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
memory_region_init_ram_nomigrate(&d->ram, OBJECT(d), "sun4u.ram", d->size,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 17:51:43 +03:00
&error_fatal);
vmstate_register_ram_global(&d->ram);
sysbus_init_mmio(sbd, &d->ram);
}
static void ram_init(hwaddr addr, ram_addr_t RAM_size)
{
DeviceState *dev;
SysBusDevice *s;
RamDevice *d;
/* allocate RAM */
dev = qdev_create(NULL, TYPE_SUN4U_MEMORY);
s = SYS_BUS_DEVICE(dev);
d = SUN4U_RAM(dev);
d->size = RAM_size;
qdev_init_nofail(dev);
sysbus_mmio_map(s, 0, addr);
}
static Property ram_properties[] = {
DEFINE_PROP_UINT64("size", RamDevice, size, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void ram_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = ram_realize;
dc->props = ram_properties;
}
static const TypeInfo ram_info = {
.name = TYPE_SUN4U_MEMORY,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(RamDevice),
.class_init = ram_class_init,
};
static void sun4uv_init(MemoryRegion *address_space_mem,
MachineState *machine,
const struct hwdef *hwdef)
{
SPARCCPU *cpu;
Nvram *nvram;
unsigned int i;
uint64_t initrd_addr, initrd_size, kernel_addr, kernel_size, kernel_entry;
SabreState *sabre;
PCIBus *pci_bus, *pci_busA, *pci_busB;
PCIDevice *ebus, *pci_dev;
SysBusDevice *s;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
DeviceState *iommu, *dev;
FWCfgState *fw_cfg;
NICInfo *nd;
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
MACAddr macaddr;
bool onboard_nic;
/* init CPUs */
cpu = sparc64_cpu_devinit(machine->cpu_type, hwdef->prom_addr);
/* IOMMU */
iommu = qdev_create(NULL, TYPE_SUN4U_IOMMU);
qdev_init_nofail(iommu);
/* set up devices */
ram_init(0, machine->ram_size);
prom_init(hwdef->prom_addr, bios_name);
/* Init sabre (PCI host bridge) */
sabre = SABRE_DEVICE(qdev_create(NULL, TYPE_SABRE));
qdev_prop_set_uint64(DEVICE(sabre), "special-base", PBM_SPECIAL_BASE);
qdev_prop_set_uint64(DEVICE(sabre), "mem-base", PBM_MEM_BASE);
object_property_set_link(OBJECT(sabre), OBJECT(iommu), "iommu",
&error_abort);
qdev_init_nofail(DEVICE(sabre));
/* Wire up PCI interrupts to CPU */
for (i = 0; i < IVEC_MAX; i++) {
qdev_connect_gpio_out_named(DEVICE(sabre), "ivec-irq", i,
qdev_get_gpio_in_named(DEVICE(cpu), "ivec-irq", i));
}
pci_bus = PCI_HOST_BRIDGE(sabre)->bus;
pci_busA = pci_bridge_get_sec_bus(sabre->bridgeA);
pci_busB = pci_bridge_get_sec_bus(sabre->bridgeB);
/* Only in-built Simba APBs can exist on the root bus, slot 0 on busA is
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
reserved (leaving no slots free after on-board devices) however slots
0-3 are free on busB */
pci_bus->slot_reserved_mask = 0xfffffffc;
pci_busA->slot_reserved_mask = 0xfffffff1;
pci_busB->slot_reserved_mask = 0xfffffff0;
ebus = pci_create_multifunction(pci_busA, PCI_DEVFN(1, 0), true, TYPE_EBUS);
qdev_prop_set_uint64(DEVICE(ebus), "console-serial-base",
hwdef->console_serial_base);
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
qdev_init_nofail(DEVICE(ebus));
/* Wire up "well-known" ISA IRQs to PBM legacy obio IRQs */
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 7,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_LPT_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 6,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_FDD_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 1,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_KBD_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 12,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_MSE_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 4,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_SER_IRQ));
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
pci_dev = pci_create_simple(pci_busA, PCI_DEVFN(2, 0), "VGA");
memset(&macaddr, 0, sizeof(MACAddr));
onboard_nic = false;
for (i = 0; i < nb_nics; i++) {
nd = &nd_table[i];
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
if (!nd->model || strcmp(nd->model, "sunhme") == 0) {
if (!onboard_nic) {
pci_dev = pci_create_multifunction(pci_busA, PCI_DEVFN(1, 1),
true, "sunhme");
memcpy(&macaddr, &nd->macaddr.a, sizeof(MACAddr));
onboard_nic = true;
} else {
pci_dev = pci_create(pci_busB, -1, "sunhme");
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
}
} else {
pci_dev = pci_create(pci_busB, -1, nd->model);
}
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
dev = &pci_dev->qdev;
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
/* If we don't have an onboard NIC, grab a default MAC address so that
* we have a valid machine id */
if (!onboard_nic) {
qemu_macaddr_default_if_unset(&macaddr);
}
ide_drive_get(hd, ARRAY_SIZE(hd));
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
pci_dev = pci_create(pci_busA, PCI_DEVFN(3, 0), "cmd646-ide");
qdev_prop_set_uint32(&pci_dev->qdev, "secondary", 1);
qdev_init_nofail(&pci_dev->qdev);
pci_ide_create_devs(pci_dev, hd);
/* Map NVRAM into I/O (ebus) space */
nvram = m48t59_init(NULL, 0, 0, NVRAM_SIZE, 1968, 59);
s = SYS_BUS_DEVICE(nvram);
memory_region_add_subregion(pci_address_space_io(ebus), 0x2000,
sysbus_mmio_get_region(s, 0));
initrd_size = 0;
initrd_addr = 0;
kernel_size = sun4u_load_kernel(machine->kernel_filename,
machine->initrd_filename,
ram_size, &initrd_size, &initrd_addr,
&kernel_addr, &kernel_entry);
sun4u_NVRAM_set_params(nvram, NVRAM_SIZE, "Sun4u", machine->ram_size,
machine->boot_order,
kernel_addr, kernel_size,
machine->kernel_cmdline,
initrd_addr, initrd_size,
/* XXX: need an option to load a NVRAM image */
0,
graphic_width, graphic_height, graphic_depth,
sun4u: update PCI topology to include simba PCI bridges This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-06-11 12:12:08 +03:00
(uint8_t *)&macaddr);
dev = qdev_create(NULL, TYPE_FW_CFG_IO);
qdev_prop_set_bit(dev, "dma_enabled", false);
object_property_add_child(OBJECT(ebus), TYPE_FW_CFG, OBJECT(dev), NULL);
qdev_init_nofail(dev);
memory_region_add_subregion(pci_address_space_io(ebus), BIOS_CFG_IOPORT,
&FW_CFG_IO(dev)->comb_iomem);
fw_cfg = FW_CFG(dev);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_entry);
fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
strlen(machine->kernel_cmdline) + 1);
fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
}
fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_DEPTH, graphic_depth);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
enum {
sun4u_id = 0,
sun4v_id = 64,
};
static const struct hwdef hwdefs[] = {
/* Sun4u generic PC-like machine */
{
.machine_id = sun4u_id,
.prom_addr = 0x1fff0000000ULL,
.console_serial_base = 0,
},
/* Sun4v generic PC-like machine */
{
.machine_id = sun4v_id,
.prom_addr = 0x1fff0000000ULL,
.console_serial_base = 0,
},
};
/* Sun4u hardware initialisation */
static void sun4u_init(MachineState *machine)
{
sun4uv_init(get_system_memory(), machine, &hwdefs[0]);
}
/* Sun4v hardware initialisation */
static void sun4v_init(MachineState *machine)
{
sun4uv_init(get_system_memory(), machine, &hwdefs[1]);
}
static void sun4u_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4u platform";
mc->init = sun4u_init;
mc->block_default_type = IF_IDE;
mc->max_cpus = 1; /* XXX for now */
mc->is_default = 1;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("TI-UltraSparc-IIi");
}
static const TypeInfo sun4u_type = {
.name = MACHINE_TYPE_NAME("sun4u"),
.parent = TYPE_MACHINE,
.class_init = sun4u_class_init,
};
static void sun4v_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4v platform";
mc->init = sun4v_init;
mc->block_default_type = IF_IDE;
mc->max_cpus = 1; /* XXX for now */
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("Sun-UltraSparc-T1");
}
static const TypeInfo sun4v_type = {
.name = MACHINE_TYPE_NAME("sun4v"),
.parent = TYPE_MACHINE,
.class_init = sun4v_class_init,
};
static void sun4u_register_types(void)
{
type_register_static(&power_info);
type_register_static(&ebus_info);
type_register_static(&prom_info);
type_register_static(&ram_info);
type_register_static(&sun4u_type);
type_register_static(&sun4v_type);
}
type_init(sun4u_register_types)