qemu/hw/display/edid-generate.c

565 lines
15 KiB
C
Raw Normal View History

/*
* QEMU EDID generator.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/bswap.h"
#include "hw/display/edid.h"
static const struct edid_mode {
uint32_t xres;
uint32_t yres;
uint32_t byte;
uint32_t xtra3;
uint32_t bit;
uint32_t dta;
} modes[] = {
/* dea/dta extension timings (all @ 50 Hz) */
{ .xres = 5120, .yres = 2160, .dta = 125 },
{ .xres = 4096, .yres = 2160, .dta = 101 },
{ .xres = 3840, .yres = 2160, .dta = 96 },
{ .xres = 2560, .yres = 1080, .dta = 89 },
{ .xres = 2048, .yres = 1152 },
{ .xres = 1920, .yres = 1080, .dta = 31 },
/* dea/dta extension timings (all @ 60 Hz) */
{ .xres = 3840, .yres = 2160, .dta = 97 },
/* additional standard timings 3 (all @ 60Hz) */
{ .xres = 1920, .yres = 1200, .xtra3 = 10, .bit = 0 },
{ .xres = 1600, .yres = 1200, .xtra3 = 9, .bit = 2 },
{ .xres = 1680, .yres = 1050, .xtra3 = 9, .bit = 5 },
{ .xres = 1440, .yres = 900, .xtra3 = 8, .bit = 5 },
{ .xres = 1280, .yres = 1024, .xtra3 = 7, .bit = 1 },
{ .xres = 1280, .yres = 960, .xtra3 = 7, .bit = 3 },
{ .xres = 1280, .yres = 768, .xtra3 = 7, .bit = 6 },
{ .xres = 1920, .yres = 1440, .xtra3 = 11, .bit = 5 },
{ .xres = 1856, .yres = 1392, .xtra3 = 10, .bit = 3 },
{ .xres = 1792, .yres = 1344, .xtra3 = 10, .bit = 5 },
{ .xres = 1440, .yres = 1050, .xtra3 = 8, .bit = 1 },
{ .xres = 1360, .yres = 768, .xtra3 = 8, .bit = 7 },
/* established timings (all @ 60Hz) */
{ .xres = 1024, .yres = 768, .byte = 36, .bit = 3 },
{ .xres = 800, .yres = 600, .byte = 35, .bit = 0 },
{ .xres = 640, .yres = 480, .byte = 35, .bit = 5 },
};
typedef struct Timings {
uint32_t xfront;
uint32_t xsync;
uint32_t xblank;
uint32_t yfront;
uint32_t ysync;
uint32_t yblank;
uint64_t clock;
} Timings;
static void generate_timings(Timings *timings, uint32_t refresh_rate,
uint32_t xres, uint32_t yres)
{
/* pull some realistic looking timings out of thin air */
timings->xfront = xres * 25 / 100;
timings->xsync = xres * 3 / 100;
timings->xblank = xres * 35 / 100;
timings->yfront = yres * 5 / 1000;
timings->ysync = yres * 5 / 1000;
timings->yblank = yres * 35 / 1000;
timings->clock = ((uint64_t)refresh_rate *
(xres + timings->xblank) *
(yres + timings->yblank)) / 10000000;
}
static void edid_ext_dta(uint8_t *dta)
{
dta[0] = 0x02;
dta[1] = 0x03;
dta[2] = 0x05;
dta[3] = 0x00;
/* video data block */
dta[4] = 0x40;
}
static void edid_ext_dta_mode(uint8_t *dta, uint8_t nr)
{
dta[dta[2]] = nr;
dta[2]++;
dta[4]++;
}
static int edid_std_mode(uint8_t *mode, uint32_t xres, uint32_t yres)
{
uint32_t aspect;
if (xres == 0 || yres == 0) {
mode[0] = 0x01;
mode[1] = 0x01;
return 0;
} else if (xres * 10 == yres * 16) {
aspect = 0;
} else if (xres * 3 == yres * 4) {
aspect = 1;
} else if (xres * 4 == yres * 5) {
aspect = 2;
} else if (xres * 9 == yres * 16) {
aspect = 3;
} else {
return -1;
}
if ((xres / 8) - 31 > 255) {
return -1;
}
mode[0] = (xres / 8) - 31;
mode[1] = ((aspect << 6) | (60 - 60));
return 0;
}
static void edid_fill_modes(uint8_t *edid, uint8_t *xtra3, uint8_t *dta,
uint32_t maxx, uint32_t maxy)
{
const struct edid_mode *mode;
int std = 38;
int rc, i;
for (i = 0; i < ARRAY_SIZE(modes); i++) {
mode = modes + i;
if ((maxx && mode->xres > maxx) ||
(maxy && mode->yres > maxy)) {
continue;
}
if (mode->byte) {
edid[mode->byte] |= (1 << mode->bit);
} else if (std < 54) {
rc = edid_std_mode(edid + std, mode->xres, mode->yres);
if (rc == 0) {
std += 2;
}
} else if (mode->xtra3 && xtra3) {
xtra3[mode->xtra3] |= (1 << mode->bit);
}
if (dta && mode->dta) {
edid_ext_dta_mode(dta, mode->dta);
}
}
while (std < 54) {
edid_std_mode(edid + std, 0, 0);
std += 2;
}
}
static void edid_checksum(uint8_t *edid, size_t len)
{
uint32_t sum = 0;
int i;
for (i = 0; i < len; i++) {
sum += edid[i];
}
sum &= 0xff;
if (sum) {
edid[len] = 0x100 - sum;
}
}
static uint8_t *edid_desc_next(uint8_t *edid, uint8_t *dta, uint8_t *desc)
{
if (desc == NULL) {
return NULL;
}
if (desc + 18 + 18 < edid + 127) {
return desc + 18;
}
if (dta) {
if (desc < edid + 127) {
return dta + dta[2];
}
if (desc + 18 + 18 < dta + 127) {
return desc + 18;
}
}
return NULL;
}
static void edid_desc_type(uint8_t *desc, uint8_t type)
{
desc[0] = 0;
desc[1] = 0;
desc[2] = 0;
desc[3] = type;
desc[4] = 0;
}
static void edid_desc_text(uint8_t *desc, uint8_t type,
const char *text)
{
size_t len;
edid_desc_type(desc, type);
memset(desc + 5, ' ', 13);
len = strlen(text);
if (len > 12) {
len = 12;
}
memcpy(desc + 5, text, len);
desc[5 + len] = '\n';
}
static void edid_desc_ranges(uint8_t *desc)
{
edid_desc_type(desc, 0xfd);
/* vertical (50 -> 125 Hz) */
desc[5] = 50;
desc[6] = 125;
/* horizontal (30 -> 160 kHz) */
desc[7] = 30;
desc[8] = 160;
/* max dot clock (2550 MHz) */
desc[9] = 2550 / 10;
/* no extended timing information */
desc[10] = 0x01;
/* padding */
desc[11] = '\n';
memset(desc + 12, ' ', 6);
}
/* additional standard timings 3 */
static void edid_desc_xtra3_std(uint8_t *desc)
{
edid_desc_type(desc, 0xf7);
desc[5] = 10;
}
static void edid_desc_dummy(uint8_t *desc)
{
edid_desc_type(desc, 0x10);
}
static void edid_desc_timing(uint8_t *desc, const Timings *timings,
uint32_t xres, uint32_t yres,
uint32_t xmm, uint32_t ymm)
{
stw_le_p(desc, timings->clock);
desc[2] = xres & 0xff;
desc[3] = timings->xblank & 0xff;
desc[4] = (((xres & 0xf00) >> 4) |
((timings->xblank & 0xf00) >> 8));
desc[5] = yres & 0xff;
desc[6] = timings->yblank & 0xff;
desc[7] = (((yres & 0xf00) >> 4) |
((timings->yblank & 0xf00) >> 8));
desc[8] = timings->xfront & 0xff;
desc[9] = timings->xsync & 0xff;
desc[10] = (((timings->yfront & 0x00f) << 4) |
((timings->ysync & 0x00f) << 0));
desc[11] = (((timings->xfront & 0x300) >> 2) |
((timings->xsync & 0x300) >> 4) |
((timings->yfront & 0x030) >> 2) |
((timings->ysync & 0x030) >> 4));
desc[12] = xmm & 0xff;
desc[13] = ymm & 0xff;
desc[14] = (((xmm & 0xf00) >> 4) |
((ymm & 0xf00) >> 8));
desc[17] = 0x18;
}
static uint32_t edid_to_10bit(float value)
{
return (uint32_t)(value * 1024 + 0.5);
}
static void edid_colorspace(uint8_t *edid,
float rx, float ry,
float gx, float gy,
float bx, float by,
float wx, float wy)
{
uint32_t red_x = edid_to_10bit(rx);
uint32_t red_y = edid_to_10bit(ry);
uint32_t green_x = edid_to_10bit(gx);
uint32_t green_y = edid_to_10bit(gy);
uint32_t blue_x = edid_to_10bit(bx);
uint32_t blue_y = edid_to_10bit(by);
uint32_t white_x = edid_to_10bit(wx);
uint32_t white_y = edid_to_10bit(wy);
edid[25] = (((red_x & 0x03) << 6) |
((red_y & 0x03) << 4) |
((green_x & 0x03) << 2) |
((green_y & 0x03) << 0));
edid[26] = (((blue_x & 0x03) << 6) |
((blue_y & 0x03) << 4) |
((white_x & 0x03) << 2) |
((white_y & 0x03) << 0));
edid[27] = red_x >> 2;
edid[28] = red_y >> 2;
edid[29] = green_x >> 2;
edid[30] = green_y >> 2;
edid[31] = blue_x >> 2;
edid[32] = blue_y >> 2;
edid[33] = white_x >> 2;
edid[34] = white_y >> 2;
}
static uint32_t qemu_edid_dpi_from_mm(uint32_t mm, uint32_t res)
{
return res * 254 / 10 / mm;
}
uint32_t qemu_edid_dpi_to_mm(uint32_t dpi, uint32_t res)
{
return res * 254 / 10 / dpi;
}
static void init_displayid(uint8_t *did)
{
did[0] = 0x70; /* display id extension */
did[1] = 0x13; /* version 1.3 */
did[2] = 4; /* length */
did[3] = 0x03; /* product type (0x03 == standalone display device) */
edid_checksum(did + 1, did[2] + 4);
}
static void qemu_displayid_generate(uint8_t *did, const Timings *timings,
uint32_t xres, uint32_t yres,
uint32_t xmm, uint32_t ymm)
{
did[0] = 0x70; /* display id extension */
did[1] = 0x13; /* version 1.3 */
did[2] = 23; /* length */
did[3] = 0x03; /* product type (0x03 == standalone display device) */
did[5] = 0x03; /* Detailed Timings Data Block */
did[6] = 0x00; /* revision */
did[7] = 0x14; /* block length */
did[8] = timings->clock & 0xff;
did[9] = (timings->clock & 0xff00) >> 8;
did[10] = (timings->clock & 0xff0000) >> 16;
did[11] = 0x88; /* leave aspect ratio undefined */
stw_le_p(did + 12, 0xffff & (xres - 1));
stw_le_p(did + 14, 0xffff & (timings->xblank - 1));
stw_le_p(did + 16, 0xffff & (timings->xfront - 1));
stw_le_p(did + 18, 0xffff & (timings->xsync - 1));
stw_le_p(did + 20, 0xffff & (yres - 1));
stw_le_p(did + 22, 0xffff & (timings->yblank - 1));
stw_le_p(did + 24, 0xffff & (timings->yfront - 1));
stw_le_p(did + 26, 0xffff & (timings->ysync - 1));
edid_checksum(did + 1, did[2] + 4);
}
void qemu_edid_generate(uint8_t *edid, size_t size,
qemu_edid_info *info)
{
Timings timings;
uint8_t *desc = edid + 54;
uint8_t *xtra3 = NULL;
uint8_t *dta = NULL;
uint8_t *did = NULL;
uint32_t width_mm, height_mm;
uint32_t refresh_rate = info->refresh_rate ? info->refresh_rate : 75000;
uint32_t dpi = 100; /* if no width_mm/height_mm */
uint32_t large_screen = 0;
/* =============== set defaults =============== */
if (!info->vendor || strlen(info->vendor) != 3) {
info->vendor = "RHT";
}
if (!info->name) {
info->name = "QEMU Monitor";
}
if (!info->prefx) {
edid: set default resolution to 1280x800 (WXGA) Currently QEMU defaults to a resolution of 1024x768 when exposing EDID info to the guest OS. The EDID default info is important as this will influence what resolution many guest OS will configure the screen with on boot. It can also potentially influence what resolution the firmware will configure the screen with, though until very recently EDK2 would not handle EDID info. One important thing to bear in mind is that the default graphics card driver provided by Windows will leave the display set to whatever resolution was enabled by the firmware on boot. Even if sufficient VRAM is available, the resolution can't be changed without installing new drivers. IOW, the default resolution choice is quite important for usability of Windows. Modern real world monitor hardware for desktop/laptop has supported resolutions higher than 1024x768 for a long time now, perhaps as long as 15+ years. There are quite a wide variety of native resolutions in use today, however, and in wide screen form factors the height may not be all that tall. None the less, it is considered that there is scope for making the QEMU default resolution slightly larger. In considering what possible new default could be suitable, choices considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA). In many ways, vertical space is the most important, and so 720p was discarded due to loosing vertical space, despite being 25% wider. The SXGA resolution would be good, but when taking into account window titlebars/toolbars and window manager desktop UI, this might be a little too tall for some users to fit the guest on their physical montior. This patch thus suggests a modest change to 1280x800 (WXGA). This only consumes 1 MB per colour channel, allowing double buffered framebuffer in 8 MB of VRAM. Width wise this is 25% larger than QEMU's current default, but height wise this only adds 5%, so the difference isn't massive on the QEMU side. Overall there doesn't appear to be a compelling reason to stick with 1024x768 resolution. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211129140508.1745130-1-berrange@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-11-29 17:05:08 +03:00
info->prefx = 1280;
}
if (!info->prefy) {
edid: set default resolution to 1280x800 (WXGA) Currently QEMU defaults to a resolution of 1024x768 when exposing EDID info to the guest OS. The EDID default info is important as this will influence what resolution many guest OS will configure the screen with on boot. It can also potentially influence what resolution the firmware will configure the screen with, though until very recently EDK2 would not handle EDID info. One important thing to bear in mind is that the default graphics card driver provided by Windows will leave the display set to whatever resolution was enabled by the firmware on boot. Even if sufficient VRAM is available, the resolution can't be changed without installing new drivers. IOW, the default resolution choice is quite important for usability of Windows. Modern real world monitor hardware for desktop/laptop has supported resolutions higher than 1024x768 for a long time now, perhaps as long as 15+ years. There are quite a wide variety of native resolutions in use today, however, and in wide screen form factors the height may not be all that tall. None the less, it is considered that there is scope for making the QEMU default resolution slightly larger. In considering what possible new default could be suitable, choices considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA). In many ways, vertical space is the most important, and so 720p was discarded due to loosing vertical space, despite being 25% wider. The SXGA resolution would be good, but when taking into account window titlebars/toolbars and window manager desktop UI, this might be a little too tall for some users to fit the guest on their physical montior. This patch thus suggests a modest change to 1280x800 (WXGA). This only consumes 1 MB per colour channel, allowing double buffered framebuffer in 8 MB of VRAM. Width wise this is 25% larger than QEMU's current default, but height wise this only adds 5%, so the difference isn't massive on the QEMU side. Overall there doesn't appear to be a compelling reason to stick with 1024x768 resolution. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211129140508.1745130-1-berrange@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-11-29 17:05:08 +03:00
info->prefy = 800;
}
if (info->width_mm && info->height_mm) {
width_mm = info->width_mm;
height_mm = info->height_mm;
dpi = qemu_edid_dpi_from_mm(width_mm, info->prefx);
} else {
width_mm = qemu_edid_dpi_to_mm(dpi, info->prefx);
height_mm = qemu_edid_dpi_to_mm(dpi, info->prefy);
}
generate_timings(&timings, refresh_rate, info->prefx, info->prefy);
if (info->prefx >= 4096 || info->prefy >= 4096 || timings.clock >= 65536) {
large_screen = 1;
}
/* =============== extensions =============== */
if (size >= 256) {
dta = edid + 128;
edid[126]++;
edid_ext_dta(dta);
}
if (size >= 384 && large_screen) {
did = edid + 256;
edid[126]++;
init_displayid(did);
}
/* =============== header information =============== */
/* fixed */
edid[0] = 0x00;
edid[1] = 0xff;
edid[2] = 0xff;
edid[3] = 0xff;
edid[4] = 0xff;
edid[5] = 0xff;
edid[6] = 0xff;
edid[7] = 0x00;
/* manufacturer id, product code, serial number */
uint16_t vendor_id = ((((info->vendor[0] - '@') & 0x1f) << 10) |
(((info->vendor[1] - '@') & 0x1f) << 5) |
(((info->vendor[2] - '@') & 0x1f) << 0));
uint16_t model_nr = 0x1234;
uint32_t serial_nr = info->serial ? atoi(info->serial) : 0;
stw_be_p(edid + 8, vendor_id);
stw_le_p(edid + 10, model_nr);
stl_le_p(edid + 12, serial_nr);
/* manufacture week and year */
edid[16] = 42;
edid[17] = 2014 - 1990;
/* edid version */
edid[18] = 1;
edid[19] = 4;
/* =============== basic display parameters =============== */
/* video input: digital, 8bpc, displayport */
edid[20] = 0xa5;
/* screen size: undefined */
edid[21] = width_mm / 10;
edid[22] = height_mm / 10;
/* display gamma: 2.2 */
edid[23] = 220 - 100;
/* supported features bitmap: std sRGB, preferred timing */
edid[24] = 0x06;
/* =============== chromaticity coordinates =============== */
/* standard sRGB colorspace */
edid_colorspace(edid,
0.6400, 0.3300, /* red */
0.3000, 0.6000, /* green */
0.1500, 0.0600, /* blue */
0.3127, 0.3290); /* white point */
/* =============== established timing bitmap =============== */
/* =============== standard timing information =============== */
/* both filled by edid_fill_modes() */
/* =============== descriptor blocks =============== */
if (!large_screen) {
/* The DTD section has only 12 bits to store the resolution */
edid_desc_timing(desc, &timings, info->prefx, info->prefy,
width_mm, height_mm);
desc = edid_desc_next(edid, dta, desc);
}
xtra3 = desc;
edid_desc_xtra3_std(xtra3);
desc = edid_desc_next(edid, dta, desc);
edid_fill_modes(edid, xtra3, dta, info->maxx, info->maxy);
/*
* dta video data block is finished at thus point,
* so dta descriptor offsets don't move any more.
*/
edid_desc_ranges(desc);
desc = edid_desc_next(edid, dta, desc);
if (desc && info->name) {
edid_desc_text(desc, 0xfc, info->name);
desc = edid_desc_next(edid, dta, desc);
}
if (desc && info->serial) {
edid_desc_text(desc, 0xff, info->serial);
desc = edid_desc_next(edid, dta, desc);
}
while (desc) {
edid_desc_dummy(desc);
desc = edid_desc_next(edid, dta, desc);
}
/* =============== display id extensions =============== */
if (did && large_screen) {
qemu_displayid_generate(did, &timings, info->prefx, info->prefy,
width_mm, height_mm);
}
/* =============== finish up =============== */
edid_checksum(edid, 127);
if (dta) {
edid_checksum(dta, 127);
}
if (did) {
edid_checksum(did, 127);
}
}
size_t qemu_edid_size(uint8_t *edid)
{
uint32_t exts;
if (edid[0] != 0x00 ||
edid[1] != 0xff) {
/* doesn't look like a valid edid block */
return 0;
}
exts = edid[126];
return 128 * (exts + 1);
}