qemu/hw/ppc/pnv.c

1145 lines
36 KiB
C
Raw Normal View History

ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
/*
* QEMU PowerPC PowerNV machine model
*
* Copyright (c) 2016, IBM Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "sysemu/sysemu.h"
#include "sysemu/numa.h"
#include "sysemu/cpus.h"
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#include "hw/hw.h"
#include "target/ppc/cpu.h"
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#include "qemu/log.h"
#include "hw/ppc/fdt.h"
#include "hw/ppc/ppc.h"
#include "hw/ppc/pnv.h"
#include "hw/ppc/pnv_core.h"
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#include "hw/loader.h"
#include "exec/address-spaces.h"
#include "qemu/cutils.h"
#include "qapi/visitor.h"
#include "monitor/monitor.h"
#include "hw/intc/intc.h"
#include "hw/ipmi/ipmi.h"
#include "target/ppc/mmu-hash64.h"
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#include "hw/ppc/xics.h"
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
#include "hw/ppc/pnv_xscom.h"
#include "hw/isa/isa.h"
#include "hw/char/serial.h"
#include "hw/timer/mc146818rtc.h"
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#include <libfdt.h>
#define FDT_MAX_SIZE 0x00100000
#define FW_FILE_NAME "skiboot.lid"
#define FW_LOAD_ADDR 0x0
#define FW_MAX_SIZE 0x00400000
#define KERNEL_LOAD_ADDR 0x20000000
#define INITRD_LOAD_ADDR 0x60000000
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
static const char *pnv_chip_core_typename(const PnvChip *o)
{
const char *chip_type = object_class_get_name(object_get_class(OBJECT(o)));
int len = strlen(chip_type) - strlen(PNV_CHIP_TYPE_SUFFIX);
char *s = g_strdup_printf(PNV_CORE_TYPE_NAME("%.*s"), len, chip_type);
const char *core_type = object_class_get_name(object_class_by_name(s));
g_free(s);
return core_type;
}
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
/*
* On Power Systems E880 (POWER8), the max cpus (threads) should be :
* 4 * 4 sockets * 12 cores * 8 threads = 1536
* Let's make it 2^11
*/
#define MAX_CPUS 2048
/*
* Memory nodes are created by hostboot, one for each range of memory
* that has a different "affinity". In practice, it means one range
* per chip.
*/
static void pnv_dt_memory(void *fdt, int chip_id, hwaddr start, hwaddr size)
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
{
char *mem_name;
uint64_t mem_reg_property[2];
int off;
mem_reg_property[0] = cpu_to_be64(start);
mem_reg_property[1] = cpu_to_be64(size);
mem_name = g_strdup_printf("memory@%"HWADDR_PRIx, start);
off = fdt_add_subnode(fdt, 0, mem_name);
g_free(mem_name);
_FDT((fdt_setprop_string(fdt, off, "device_type", "memory")));
_FDT((fdt_setprop(fdt, off, "reg", mem_reg_property,
sizeof(mem_reg_property))));
_FDT((fdt_setprop_cell(fdt, off, "ibm,chip-id", chip_id)));
}
static int get_cpus_node(void *fdt)
{
int cpus_offset = fdt_path_offset(fdt, "/cpus");
if (cpus_offset < 0) {
cpus_offset = fdt_add_subnode(fdt, 0, "cpus");
if (cpus_offset) {
_FDT((fdt_setprop_cell(fdt, cpus_offset, "#address-cells", 0x1)));
_FDT((fdt_setprop_cell(fdt, cpus_offset, "#size-cells", 0x0)));
}
}
_FDT(cpus_offset);
return cpus_offset;
}
/*
* The PowerNV cores (and threads) need to use real HW ids and not an
* incremental index like it has been done on other platforms. This HW
* id is stored in the CPU PIR, it is used to create cpu nodes in the
* device tree, used in XSCOM to address cores and in interrupt
* servers.
*/
static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt)
{
CPUState *cs = CPU(DEVICE(pc->threads));
DeviceClass *dc = DEVICE_GET_CLASS(cs);
PowerPCCPU *cpu = POWERPC_CPU(cs);
int smt_threads = CPU_CORE(pc)->nr_threads;
CPUPPCState *env = &cpu->env;
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cs);
uint32_t servers_prop[smt_threads];
int i;
uint32_t segs[] = {cpu_to_be32(28), cpu_to_be32(40),
0xffffffff, 0xffffffff};
uint32_t tbfreq = PNV_TIMEBASE_FREQ;
uint32_t cpufreq = 1000000000;
uint32_t page_sizes_prop[64];
size_t page_sizes_prop_size;
const uint8_t pa_features[] = { 24, 0,
0xf6, 0x3f, 0xc7, 0xc0, 0x80, 0xf0,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
0x80, 0x00, 0x80, 0x00, 0x80, 0x00 };
int offset;
char *nodename;
int cpus_offset = get_cpus_node(fdt);
nodename = g_strdup_printf("%s@%x", dc->fw_name, pc->pir);
offset = fdt_add_subnode(fdt, cpus_offset, nodename);
_FDT(offset);
g_free(nodename);
_FDT((fdt_setprop_cell(fdt, offset, "ibm,chip-id", chip->chip_id)));
_FDT((fdt_setprop_cell(fdt, offset, "reg", pc->pir)));
_FDT((fdt_setprop_cell(fdt, offset, "ibm,pir", pc->pir)));
_FDT((fdt_setprop_string(fdt, offset, "device_type", "cpu")));
_FDT((fdt_setprop_cell(fdt, offset, "cpu-version", env->spr[SPR_PVR])));
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-block-size",
env->dcache_line_size)));
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-line-size",
env->dcache_line_size)));
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-block-size",
env->icache_line_size)));
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-line-size",
env->icache_line_size)));
if (pcc->l1_dcache_size) {
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-size",
pcc->l1_dcache_size)));
} else {
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 16:57:41 +03:00
warn_report("Unknown L1 dcache size for cpu");
}
if (pcc->l1_icache_size) {
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-size",
pcc->l1_icache_size)));
} else {
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 16:57:41 +03:00
warn_report("Unknown L1 icache size for cpu");
}
_FDT((fdt_setprop_cell(fdt, offset, "timebase-frequency", tbfreq)));
_FDT((fdt_setprop_cell(fdt, offset, "clock-frequency", cpufreq)));
_FDT((fdt_setprop_cell(fdt, offset, "ibm,slb-size", cpu->hash64_opts->slb_size)));
_FDT((fdt_setprop_string(fdt, offset, "status", "okay")));
_FDT((fdt_setprop(fdt, offset, "64-bit", NULL, 0)));
if (env->spr_cb[SPR_PURR].oea_read) {
_FDT((fdt_setprop(fdt, offset, "ibm,purr", NULL, 0)));
}
if (ppc_hash64_has(cpu, PPC_HASH64_1TSEG)) {
_FDT((fdt_setprop(fdt, offset, "ibm,processor-segment-sizes",
segs, sizeof(segs))));
}
/* Advertise VMX/VSX (vector extensions) if available
* 0 / no property == no vector extensions
* 1 == VMX / Altivec available
* 2 == VSX available */
if (env->insns_flags & PPC_ALTIVEC) {
uint32_t vmx = (env->insns_flags2 & PPC2_VSX) ? 2 : 1;
_FDT((fdt_setprop_cell(fdt, offset, "ibm,vmx", vmx)));
}
/* Advertise DFP (Decimal Floating Point) if available
* 0 / no property == no DFP
* 1 == DFP available */
if (env->insns_flags2 & PPC2_DFP) {
_FDT((fdt_setprop_cell(fdt, offset, "ibm,dfp", 1)));
}
page_sizes_prop_size = ppc_create_page_sizes_prop(cpu, page_sizes_prop,
sizeof(page_sizes_prop));
if (page_sizes_prop_size) {
_FDT((fdt_setprop(fdt, offset, "ibm,segment-page-sizes",
page_sizes_prop, page_sizes_prop_size)));
}
_FDT((fdt_setprop(fdt, offset, "ibm,pa-features",
pa_features, sizeof(pa_features))));
/* Build interrupt servers properties */
for (i = 0; i < smt_threads; i++) {
servers_prop[i] = cpu_to_be32(pc->pir + i);
}
_FDT((fdt_setprop(fdt, offset, "ibm,ppc-interrupt-server#s",
servers_prop, sizeof(servers_prop))));
}
static void pnv_dt_icp(PnvChip *chip, void *fdt, uint32_t pir,
uint32_t nr_threads)
{
uint64_t addr = PNV_ICP_BASE(chip) | (pir << 12);
char *name;
const char compat[] = "IBM,power8-icp\0IBM,ppc-xicp";
uint32_t irange[2], i, rsize;
uint64_t *reg;
int offset;
irange[0] = cpu_to_be32(pir);
irange[1] = cpu_to_be32(nr_threads);
rsize = sizeof(uint64_t) * 2 * nr_threads;
reg = g_malloc(rsize);
for (i = 0; i < nr_threads; i++) {
reg[i * 2] = cpu_to_be64(addr | ((pir + i) * 0x1000));
reg[i * 2 + 1] = cpu_to_be64(0x1000);
}
name = g_strdup_printf("interrupt-controller@%"PRIX64, addr);
offset = fdt_add_subnode(fdt, 0, name);
_FDT(offset);
g_free(name);
_FDT((fdt_setprop(fdt, offset, "compatible", compat, sizeof(compat))));
_FDT((fdt_setprop(fdt, offset, "reg", reg, rsize)));
_FDT((fdt_setprop_string(fdt, offset, "device_type",
"PowerPC-External-Interrupt-Presentation")));
_FDT((fdt_setprop(fdt, offset, "interrupt-controller", NULL, 0)));
_FDT((fdt_setprop(fdt, offset, "ibm,interrupt-server-ranges",
irange, sizeof(irange))));
_FDT((fdt_setprop_cell(fdt, offset, "#interrupt-cells", 1)));
_FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 0)));
g_free(reg);
}
static int pnv_chip_lpc_offset(PnvChip *chip, void *fdt)
{
char *name;
int offset;
name = g_strdup_printf("/xscom@%" PRIx64 "/isa@%x",
(uint64_t) PNV_XSCOM_BASE(chip), PNV_XSCOM_LPC_BASE);
offset = fdt_path_offset(fdt, name);
g_free(name);
return offset;
}
static void pnv_dt_chip(PnvChip *chip, void *fdt)
{
const char *typename = pnv_chip_core_typename(chip);
size_t typesize = object_type_get_instance_size(typename);
int i;
pnv_dt_xscom(chip, fdt, 0);
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
/* The default LPC bus of a multichip system is on chip 0. It's
* recognized by the firmware (skiboot) using a "primary"
* property.
*/
if (chip->chip_id == 0x0) {
int lpc_offset = pnv_chip_lpc_offset(chip, fdt);
_FDT((fdt_setprop(fdt, lpc_offset, "primary", NULL, 0)));
}
for (i = 0; i < chip->nr_cores; i++) {
PnvCore *pnv_core = PNV_CORE(chip->cores + i * typesize);
pnv_dt_core(chip, pnv_core, fdt);
/* Interrupt Control Presenters (ICP). One per core. */
pnv_dt_icp(chip, fdt, pnv_core->pir, CPU_CORE(pnv_core)->nr_threads);
}
if (chip->ram_size) {
pnv_dt_memory(fdt, chip->chip_id, chip->ram_start, chip->ram_size);
}
}
static void pnv_dt_rtc(ISADevice *d, void *fdt, int lpc_off)
{
uint32_t io_base = d->ioport_id;
uint32_t io_regs[] = {
cpu_to_be32(1),
cpu_to_be32(io_base),
cpu_to_be32(2)
};
char *name;
int node;
name = g_strdup_printf("%s@i%x", qdev_fw_name(DEVICE(d)), io_base);
node = fdt_add_subnode(fdt, lpc_off, name);
_FDT(node);
g_free(name);
_FDT((fdt_setprop(fdt, node, "reg", io_regs, sizeof(io_regs))));
_FDT((fdt_setprop_string(fdt, node, "compatible", "pnpPNP,b00")));
}
static void pnv_dt_serial(ISADevice *d, void *fdt, int lpc_off)
{
const char compatible[] = "ns16550\0pnpPNP,501";
uint32_t io_base = d->ioport_id;
uint32_t io_regs[] = {
cpu_to_be32(1),
cpu_to_be32(io_base),
cpu_to_be32(8)
};
char *name;
int node;
name = g_strdup_printf("%s@i%x", qdev_fw_name(DEVICE(d)), io_base);
node = fdt_add_subnode(fdt, lpc_off, name);
_FDT(node);
g_free(name);
_FDT((fdt_setprop(fdt, node, "reg", io_regs, sizeof(io_regs))));
_FDT((fdt_setprop(fdt, node, "compatible", compatible,
sizeof(compatible))));
_FDT((fdt_setprop_cell(fdt, node, "clock-frequency", 1843200)));
_FDT((fdt_setprop_cell(fdt, node, "current-speed", 115200)));
_FDT((fdt_setprop_cell(fdt, node, "interrupts", d->isairq[0])));
_FDT((fdt_setprop_cell(fdt, node, "interrupt-parent",
fdt_get_phandle(fdt, lpc_off))));
/* This is needed by Linux */
_FDT((fdt_setprop_string(fdt, node, "device_type", "serial")));
}
static void pnv_dt_ipmi_bt(ISADevice *d, void *fdt, int lpc_off)
{
const char compatible[] = "bt\0ipmi-bt";
uint32_t io_base;
uint32_t io_regs[] = {
cpu_to_be32(1),
0, /* 'io_base' retrieved from the 'ioport' property of 'isa-ipmi-bt' */
cpu_to_be32(3)
};
uint32_t irq;
char *name;
int node;
io_base = object_property_get_int(OBJECT(d), "ioport", &error_fatal);
io_regs[1] = cpu_to_be32(io_base);
irq = object_property_get_int(OBJECT(d), "irq", &error_fatal);
name = g_strdup_printf("%s@i%x", qdev_fw_name(DEVICE(d)), io_base);
node = fdt_add_subnode(fdt, lpc_off, name);
_FDT(node);
g_free(name);
_FDT((fdt_setprop(fdt, node, "reg", io_regs, sizeof(io_regs))));
_FDT((fdt_setprop(fdt, node, "compatible", compatible,
sizeof(compatible))));
/* Mark it as reserved to avoid Linux trying to claim it */
_FDT((fdt_setprop_string(fdt, node, "status", "reserved")));
_FDT((fdt_setprop_cell(fdt, node, "interrupts", irq)));
_FDT((fdt_setprop_cell(fdt, node, "interrupt-parent",
fdt_get_phandle(fdt, lpc_off))));
}
typedef struct ForeachPopulateArgs {
void *fdt;
int offset;
} ForeachPopulateArgs;
static int pnv_dt_isa_device(DeviceState *dev, void *opaque)
{
ForeachPopulateArgs *args = opaque;
ISADevice *d = ISA_DEVICE(dev);
if (object_dynamic_cast(OBJECT(dev), TYPE_MC146818_RTC)) {
pnv_dt_rtc(d, args->fdt, args->offset);
} else if (object_dynamic_cast(OBJECT(dev), TYPE_ISA_SERIAL)) {
pnv_dt_serial(d, args->fdt, args->offset);
} else if (object_dynamic_cast(OBJECT(dev), "isa-ipmi-bt")) {
pnv_dt_ipmi_bt(d, args->fdt, args->offset);
} else {
error_report("unknown isa device %s@i%x", qdev_fw_name(dev),
d->ioport_id);
}
return 0;
}
static void pnv_dt_isa(ISABus *bus, void *fdt, int lpc_offset)
{
ForeachPopulateArgs args = {
.fdt = fdt,
.offset = lpc_offset,
};
/* ISA devices are not necessarily parented to the ISA bus so we
* can not use object_child_foreach() */
qbus_walk_children(BUS(bus), pnv_dt_isa_device, NULL, NULL, NULL, &args);
}
static void *pnv_dt_create(MachineState *machine)
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
{
const char plat_compat[] = "qemu,powernv\0ibm,powernv";
PnvMachineState *pnv = PNV_MACHINE(machine);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
void *fdt;
char *buf;
int off;
int i;
int lpc_offset;
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
fdt = g_malloc0(FDT_MAX_SIZE);
_FDT((fdt_create_empty_tree(fdt, FDT_MAX_SIZE)));
/* Root node */
_FDT((fdt_setprop_cell(fdt, 0, "#address-cells", 0x2)));
_FDT((fdt_setprop_cell(fdt, 0, "#size-cells", 0x2)));
_FDT((fdt_setprop_string(fdt, 0, "model",
"IBM PowerNV (emulated by qemu)")));
_FDT((fdt_setprop(fdt, 0, "compatible", plat_compat,
sizeof(plat_compat))));
buf = qemu_uuid_unparse_strdup(&qemu_uuid);
_FDT((fdt_setprop_string(fdt, 0, "vm,uuid", buf)));
if (qemu_uuid_set) {
_FDT((fdt_property_string(fdt, "system-id", buf)));
}
g_free(buf);
off = fdt_add_subnode(fdt, 0, "chosen");
if (machine->kernel_cmdline) {
_FDT((fdt_setprop_string(fdt, off, "bootargs",
machine->kernel_cmdline)));
}
if (pnv->initrd_size) {
uint32_t start_prop = cpu_to_be32(pnv->initrd_base);
uint32_t end_prop = cpu_to_be32(pnv->initrd_base + pnv->initrd_size);
_FDT((fdt_setprop(fdt, off, "linux,initrd-start",
&start_prop, sizeof(start_prop))));
_FDT((fdt_setprop(fdt, off, "linux,initrd-end",
&end_prop, sizeof(end_prop))));
}
/* Populate device tree for each chip */
for (i = 0; i < pnv->num_chips; i++) {
pnv_dt_chip(pnv->chips[i], fdt);
}
/* Populate ISA devices on chip 0 */
lpc_offset = pnv_chip_lpc_offset(pnv->chips[0], fdt);
pnv_dt_isa(pnv->isa_bus, fdt, lpc_offset);
if (pnv->bmc) {
pnv_dt_bmc_sensors(pnv->bmc, fdt);
}
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
return fdt;
}
static void pnv_powerdown_notify(Notifier *n, void *opaque)
{
PnvMachineState *pnv = PNV_MACHINE(qdev_get_machine());
if (pnv->bmc) {
pnv_bmc_powerdown(pnv->bmc);
}
}
static void pnv_reset(void)
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
{
MachineState *machine = MACHINE(qdev_get_machine());
PnvMachineState *pnv = PNV_MACHINE(machine);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
void *fdt;
Object *obj;
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
qemu_devices_reset();
/* OpenPOWER systems have a BMC, which can be defined on the
* command line with:
*
* -device ipmi-bmc-sim,id=bmc0
*
* This is the internal simulator but it could also be an external
* BMC.
*/
obj = object_resolve_path_type("", "ipmi-bmc-sim", NULL);
if (obj) {
pnv->bmc = IPMI_BMC(obj);
}
fdt = pnv_dt_create(machine);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
/* Pack resulting tree */
_FDT((fdt_pack(fdt)));
cpu_physical_memory_write(PNV_FDT_ADDR, fdt, fdt_totalsize(fdt));
}
static ISABus *pnv_isa_create(PnvChip *chip)
{
PnvLpcController *lpc = &chip->lpc;
ISABus *isa_bus;
qemu_irq *irqs;
PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
/* let isa_bus_new() create its own bridge on SysBus otherwise
* devices speficied on the command line won't find the bus and
* will fail to create.
*/
isa_bus = isa_bus_new(NULL, &lpc->isa_mem, &lpc->isa_io,
&error_fatal);
irqs = pnv_lpc_isa_irq_create(lpc, pcc->chip_type, ISA_NUM_IRQS);
isa_bus_irqs(isa_bus, irqs);
return isa_bus;
}
static void pnv_init(MachineState *machine)
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
{
PnvMachineState *pnv = PNV_MACHINE(machine);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
MemoryRegion *ram;
char *fw_filename;
long fw_size;
int i;
char *chip_typename;
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
/* allocate RAM */
if (machine->ram_size < (1 * G_BYTE)) {
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 16:57:41 +03:00
warn_report("skiboot may not work with < 1GB of RAM");
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
}
ram = g_new(MemoryRegion, 1);
memory_region_allocate_system_memory(ram, NULL, "pnv.ram",
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
machine->ram_size);
memory_region_add_subregion(get_system_memory(), 0, ram);
/* load skiboot firmware */
if (bios_name == NULL) {
bios_name = FW_FILE_NAME;
}
fw_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (!fw_filename) {
error_report("Could not find OPAL firmware '%s'", bios_name);
exit(1);
}
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
fw_size = load_image_targphys(fw_filename, FW_LOAD_ADDR, FW_MAX_SIZE);
if (fw_size < 0) {
error_report("Could not load OPAL firmware '%s'", fw_filename);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
exit(1);
}
g_free(fw_filename);
/* load kernel */
if (machine->kernel_filename) {
long kernel_size;
kernel_size = load_image_targphys(machine->kernel_filename,
KERNEL_LOAD_ADDR, 0x2000000);
if (kernel_size < 0) {
error_report("Could not load kernel '%s'",
machine->kernel_filename);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
exit(1);
}
}
/* load initrd */
if (machine->initrd_filename) {
pnv->initrd_base = INITRD_LOAD_ADDR;
pnv->initrd_size = load_image_targphys(machine->initrd_filename,
pnv->initrd_base, 0x10000000); /* 128MB max */
if (pnv->initrd_size < 0) {
error_report("Could not load initial ram disk '%s'",
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
machine->initrd_filename);
exit(1);
}
}
/* Create the processor chips */
i = strlen(machine->cpu_type) - strlen(POWERPC_CPU_TYPE_SUFFIX);
chip_typename = g_strdup_printf(PNV_CHIP_TYPE_NAME("%.*s"),
i, machine->cpu_type);
if (!object_class_by_name(chip_typename)) {
error_report("invalid CPU model '%.*s' for %s machine",
i, machine->cpu_type, MACHINE_GET_CLASS(machine)->name);
exit(1);
}
pnv->chips = g_new0(PnvChip *, pnv->num_chips);
for (i = 0; i < pnv->num_chips; i++) {
char chip_name[32];
Object *chip = object_new(chip_typename);
pnv->chips[i] = PNV_CHIP(chip);
/* TODO: put all the memory in one node on chip 0 until we find a
* way to specify different ranges for each chip
*/
if (i == 0) {
object_property_set_int(chip, machine->ram_size, "ram-size",
&error_fatal);
}
snprintf(chip_name, sizeof(chip_name), "chip[%d]", PNV_CHIP_HWID(i));
object_property_add_child(OBJECT(pnv), chip_name, chip, &error_fatal);
object_property_set_int(chip, PNV_CHIP_HWID(i), "chip-id",
&error_fatal);
object_property_set_int(chip, smp_cores, "nr-cores", &error_fatal);
object_property_set_bool(chip, true, "realized", &error_fatal);
}
g_free(chip_typename);
/* Instantiate ISA bus on chip 0 */
pnv->isa_bus = pnv_isa_create(pnv->chips[0]);
/* Create serial port */
serial_hds_isa_init(pnv->isa_bus, 0, MAX_ISA_SERIAL_PORTS);
/* Create an RTC ISA device too */
mc146818_rtc_init(pnv->isa_bus, 2000, NULL);
/* OpenPOWER systems use a IPMI SEL Event message to notify the
* host to powerdown */
pnv->powerdown_notifier.notify = pnv_powerdown_notify;
qemu_register_powerdown_notifier(&pnv->powerdown_notifier);
}
/*
* 0:21 Reserved - Read as zeros
* 22:24 Chip ID
* 25:28 Core number
* 29:31 Thread ID
*/
static uint32_t pnv_chip_core_pir_p8(PnvChip *chip, uint32_t core_id)
{
return (chip->chip_id << 7) | (core_id << 3);
}
/*
* 0:48 Reserved - Read as zeroes
* 49:52 Node ID
* 53:55 Chip ID
* 56 Reserved - Read as zero
* 57:61 Core number
* 62:63 Thread ID
*
* We only care about the lower bits. uint32_t is fine for the moment.
*/
static uint32_t pnv_chip_core_pir_p9(PnvChip *chip, uint32_t core_id)
{
return (chip->chip_id << 8) | (core_id << 2);
}
/* Allowed core identifiers on a POWER8 Processor Chip :
*
* <EX0 reserved>
* EX1 - Venice only
* EX2 - Venice only
* EX3 - Venice only
* EX4
* EX5
* EX6
* <EX7,8 reserved> <reserved>
* EX9 - Venice only
* EX10 - Venice only
* EX11 - Venice only
* EX12
* EX13
* EX14
* <EX15 reserved>
*/
#define POWER8E_CORE_MASK (0x7070ull)
#define POWER8_CORE_MASK (0x7e7eull)
/*
* POWER9 has 24 cores, ids starting at 0x0
*/
#define POWER9_CORE_MASK (0xffffffffffffffull)
static void pnv_chip_power8e_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PnvChipClass *k = PNV_CHIP_CLASS(klass);
k->chip_type = PNV_CHIP_POWER8E;
k->chip_cfam_id = 0x221ef04980000000ull; /* P8 Murano DD2.1 */
k->cores_mask = POWER8E_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p8;
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
k->xscom_base = 0x003fc0000000000ull;
dc->desc = "PowerNV Chip POWER8E";
}
static void pnv_chip_power8_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PnvChipClass *k = PNV_CHIP_CLASS(klass);
k->chip_type = PNV_CHIP_POWER8;
k->chip_cfam_id = 0x220ea04980000000ull; /* P8 Venice DD2.0 */
k->cores_mask = POWER8_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p8;
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
k->xscom_base = 0x003fc0000000000ull;
dc->desc = "PowerNV Chip POWER8";
}
static void pnv_chip_power8nvl_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PnvChipClass *k = PNV_CHIP_CLASS(klass);
k->chip_type = PNV_CHIP_POWER8NVL;
k->chip_cfam_id = 0x120d304980000000ull; /* P8 Naples DD1.0 */
k->cores_mask = POWER8_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p8;
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
k->xscom_base = 0x003fc0000000000ull;
dc->desc = "PowerNV Chip POWER8NVL";
}
static void pnv_chip_power9_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PnvChipClass *k = PNV_CHIP_CLASS(klass);
k->chip_type = PNV_CHIP_POWER9;
k->chip_cfam_id = 0x220d104900008000ull; /* P9 Nimbus DD2.0 */
k->cores_mask = POWER9_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p9;
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
k->xscom_base = 0x00603fc00000000ull;
dc->desc = "PowerNV Chip POWER9";
}
static void pnv_chip_core_sanitize(PnvChip *chip, Error **errp)
{
PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
int cores_max;
/*
* No custom mask for this chip, let's use the default one from *
* the chip class
*/
if (!chip->cores_mask) {
chip->cores_mask = pcc->cores_mask;
}
/* filter alien core ids ! some are reserved */
if ((chip->cores_mask & pcc->cores_mask) != chip->cores_mask) {
error_setg(errp, "warning: invalid core mask for chip Ox%"PRIx64" !",
chip->cores_mask);
return;
}
chip->cores_mask &= pcc->cores_mask;
/* now that we have a sane layout, let check the number of cores */
cores_max = ctpop64(chip->cores_mask);
if (chip->nr_cores > cores_max) {
error_setg(errp, "warning: too many cores for chip ! Limit is %d",
cores_max);
return;
}
}
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
static void pnv_chip_init(Object *obj)
{
PnvChip *chip = PNV_CHIP(obj);
PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
chip->xscom_base = pcc->xscom_base;
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:42 +03:00
object_initialize(&chip->lpc, sizeof(chip->lpc), TYPE_PNV_LPC);
object_property_add_child(obj, "lpc", OBJECT(&chip->lpc), NULL);
object_initialize(&chip->psi, sizeof(chip->psi), TYPE_PNV_PSI);
object_property_add_child(obj, "psi", OBJECT(&chip->psi), NULL);
object_property_add_const_link(OBJECT(&chip->psi), "xics",
OBJECT(qdev_get_machine()), &error_abort);
object_initialize(&chip->occ, sizeof(chip->occ), TYPE_PNV_OCC);
object_property_add_child(obj, "occ", OBJECT(&chip->occ), NULL);
object_property_add_const_link(OBJECT(&chip->occ), "psi",
OBJECT(&chip->psi), &error_abort);
/* The LPC controller needs PSI to generate interrupts */
object_property_add_const_link(OBJECT(&chip->lpc), "psi",
OBJECT(&chip->psi), &error_abort);
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
}
static void pnv_chip_icp_realize(PnvChip *chip, Error **errp)
{
PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
const char *typename = pnv_chip_core_typename(chip);
size_t typesize = object_type_get_instance_size(typename);
int i, j;
char *name;
XICSFabric *xi = XICS_FABRIC(qdev_get_machine());
name = g_strdup_printf("icp-%x", chip->chip_id);
memory_region_init(&chip->icp_mmio, OBJECT(chip), name, PNV_ICP_SIZE);
sysbus_init_mmio(SYS_BUS_DEVICE(chip), &chip->icp_mmio);
g_free(name);
sysbus_mmio_map(SYS_BUS_DEVICE(chip), 1, PNV_ICP_BASE(chip));
/* Map the ICP registers for each thread */
for (i = 0; i < chip->nr_cores; i++) {
PnvCore *pnv_core = PNV_CORE(chip->cores + i * typesize);
int core_hwid = CPU_CORE(pnv_core)->core_id;
for (j = 0; j < CPU_CORE(pnv_core)->nr_threads; j++) {
uint32_t pir = pcc->core_pir(chip, core_hwid) + j;
PnvICPState *icp = PNV_ICP(xics_icp_get(xi, pir));
memory_region_add_subregion(&chip->icp_mmio, pir << 12, &icp->mmio);
}
}
}
static void pnv_chip_realize(DeviceState *dev, Error **errp)
{
PnvChip *chip = PNV_CHIP(dev);
Error *error = NULL;
PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
const char *typename = pnv_chip_core_typename(chip);
size_t typesize = object_type_get_instance_size(typename);
int i, core_hwid;
if (!object_class_by_name(typename)) {
error_setg(errp, "Unable to find PowerNV CPU Core '%s'", typename);
return;
}
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
/* XSCOM bridge */
pnv_xscom_realize(chip, &error);
if (error) {
error_propagate(errp, error);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(chip), 0, PNV_XSCOM_BASE(chip));
/* Cores */
pnv_chip_core_sanitize(chip, &error);
if (error) {
error_propagate(errp, error);
return;
}
chip->cores = g_malloc0(typesize * chip->nr_cores);
for (i = 0, core_hwid = 0; (core_hwid < sizeof(chip->cores_mask) * 8)
&& (i < chip->nr_cores); core_hwid++) {
char core_name[32];
void *pnv_core = chip->cores + i * typesize;
uint64_t xscom_core_base;
if (!(chip->cores_mask & (1ull << core_hwid))) {
continue;
}
object_initialize(pnv_core, typesize, typename);
snprintf(core_name, sizeof(core_name), "core[%d]", core_hwid);
object_property_add_child(OBJECT(chip), core_name, OBJECT(pnv_core),
&error_fatal);
object_property_set_int(OBJECT(pnv_core), smp_threads, "nr-threads",
&error_fatal);
object_property_set_int(OBJECT(pnv_core), core_hwid,
CPU_CORE_PROP_CORE_ID, &error_fatal);
object_property_set_int(OBJECT(pnv_core),
pcc->core_pir(chip, core_hwid),
"pir", &error_fatal);
object_property_add_const_link(OBJECT(pnv_core), "xics",
qdev_get_machine(), &error_fatal);
object_property_set_bool(OBJECT(pnv_core), true, "realized",
&error_fatal);
object_unref(OBJECT(pnv_core));
/* Each core has an XSCOM MMIO region */
if (!pnv_chip_is_power9(chip)) {
xscom_core_base = PNV_XSCOM_EX_BASE(core_hwid);
} else {
xscom_core_base = PNV_XSCOM_P9_EC_BASE(core_hwid);
}
pnv_xscom_add_subregion(chip, xscom_core_base,
&PNV_CORE(pnv_core)->xscom_regs);
i++;
}
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:42 +03:00
/* Create LPC controller */
object_property_set_bool(OBJECT(&chip->lpc), true, "realized",
&error_fatal);
pnv_xscom_add_subregion(chip, PNV_XSCOM_LPC_BASE, &chip->lpc.xscom_regs);
/* Interrupt Management Area. This is the memory region holding
* all the Interrupt Control Presenter (ICP) registers */
pnv_chip_icp_realize(chip, &error);
if (error) {
error_propagate(errp, error);
return;
}
/* Processor Service Interface (PSI) Host Bridge */
object_property_set_int(OBJECT(&chip->psi), PNV_PSIHB_BASE(chip),
"bar", &error_fatal);
object_property_set_bool(OBJECT(&chip->psi), true, "realized", &error);
if (error) {
error_propagate(errp, error);
return;
}
pnv_xscom_add_subregion(chip, PNV_XSCOM_PSIHB_BASE, &chip->psi.xscom_regs);
/* Create the simplified OCC model */
object_property_set_bool(OBJECT(&chip->occ), true, "realized", &error);
if (error) {
error_propagate(errp, error);
return;
}
pnv_xscom_add_subregion(chip, PNV_XSCOM_OCC_BASE, &chip->occ.xscom_regs);
}
static Property pnv_chip_properties[] = {
DEFINE_PROP_UINT32("chip-id", PnvChip, chip_id, 0),
DEFINE_PROP_UINT64("ram-start", PnvChip, ram_start, 0),
DEFINE_PROP_UINT64("ram-size", PnvChip, ram_size, 0),
DEFINE_PROP_UINT32("nr-cores", PnvChip, nr_cores, 1),
DEFINE_PROP_UINT64("cores-mask", PnvChip, cores_mask, 0x0),
DEFINE_PROP_END_OF_LIST(),
};
static void pnv_chip_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
set_bit(DEVICE_CATEGORY_CPU, dc->categories);
dc->realize = pnv_chip_realize;
dc->props = pnv_chip_properties;
dc->desc = "PowerNV Chip";
}
static ICSState *pnv_ics_get(XICSFabric *xi, int irq)
{
PnvMachineState *pnv = PNV_MACHINE(xi);
int i;
for (i = 0; i < pnv->num_chips; i++) {
if (ics_valid_irq(&pnv->chips[i]->psi.ics, irq)) {
return &pnv->chips[i]->psi.ics;
}
}
return NULL;
}
static void pnv_ics_resend(XICSFabric *xi)
{
PnvMachineState *pnv = PNV_MACHINE(xi);
int i;
for (i = 0; i < pnv->num_chips; i++) {
ics_resend(&pnv->chips[i]->psi.ics);
}
}
static PowerPCCPU *ppc_get_vcpu_by_pir(int pir)
{
CPUState *cs;
CPU_FOREACH(cs) {
PowerPCCPU *cpu = POWERPC_CPU(cs);
CPUPPCState *env = &cpu->env;
if (env->spr_cb[SPR_PIR].default_value == pir) {
return cpu;
}
}
return NULL;
}
static ICPState *pnv_icp_get(XICSFabric *xi, int pir)
{
PowerPCCPU *cpu = ppc_get_vcpu_by_pir(pir);
return cpu ? ICP(cpu->intc) : NULL;
}
static void pnv_pic_print_info(InterruptStatsProvider *obj,
Monitor *mon)
{
PnvMachineState *pnv = PNV_MACHINE(obj);
int i;
CPUState *cs;
CPU_FOREACH(cs) {
PowerPCCPU *cpu = POWERPC_CPU(cs);
icp_pic_print_info(ICP(cpu->intc), mon);
}
for (i = 0; i < pnv->num_chips; i++) {
ics_pic_print_info(&pnv->chips[i]->psi.ics, mon);
}
}
static void pnv_get_num_chips(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
visit_type_uint32(v, name, &PNV_MACHINE(obj)->num_chips, errp);
}
static void pnv_set_num_chips(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
PnvMachineState *pnv = PNV_MACHINE(obj);
uint32_t num_chips;
Error *local_err = NULL;
visit_type_uint32(v, name, &num_chips, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
/*
* TODO: should we decide on how many chips we can create based
* on #cores and Venice vs. Murano vs. Naples chip type etc...,
*/
if (!is_power_of_2(num_chips) || num_chips > 4) {
error_setg(errp, "invalid number of chips: '%d'", num_chips);
return;
}
pnv->num_chips = num_chips;
}
static void pnv_machine_initfn(Object *obj)
{
PnvMachineState *pnv = PNV_MACHINE(obj);
pnv->num_chips = 1;
}
static void pnv_machine_class_props_init(ObjectClass *oc)
{
object_class_property_add(oc, "num-chips", "uint32",
pnv_get_num_chips, pnv_set_num_chips,
NULL, NULL, NULL);
object_class_property_set_description(oc, "num-chips",
"Specifies the number of processor chips",
NULL);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
}
static void pnv_machine_class_init(ObjectClass *oc, void *data)
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
{
MachineClass *mc = MACHINE_CLASS(oc);
XICSFabricClass *xic = XICS_FABRIC_CLASS(oc);
InterruptStatsProviderClass *ispc = INTERRUPT_STATS_PROVIDER_CLASS(oc);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
mc->desc = "IBM PowerNV (Non-Virtualized)";
mc->init = pnv_init;
mc->reset = pnv_reset;
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
mc->max_cpus = MAX_CPUS;
mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("power8_v2.0");
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
mc->block_default_type = IF_IDE; /* Pnv provides a AHCI device for
* storage */
mc->no_parallel = 1;
mc->default_boot_order = NULL;
mc->default_ram_size = 1 * G_BYTE;
xic->icp_get = pnv_icp_get;
xic->ics_get = pnv_ics_get;
xic->ics_resend = pnv_ics_resend;
ispc->print_info = pnv_pic_print_info;
pnv_machine_class_props_init(oc);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
}
#define DEFINE_PNV_CHIP_TYPE(type, class_initfn) \
{ \
.name = type, \
.class_init = class_initfn, \
.parent = TYPE_PNV_CHIP, \
}
static const TypeInfo types[] = {
{
.name = TYPE_PNV_MACHINE,
.parent = TYPE_MACHINE,
.instance_size = sizeof(PnvMachineState),
.instance_init = pnv_machine_initfn,
.class_init = pnv_machine_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_XICS_FABRIC },
{ TYPE_INTERRUPT_STATS_PROVIDER },
{ },
},
},
{
.name = TYPE_PNV_CHIP,
.parent = TYPE_SYS_BUS_DEVICE,
.class_init = pnv_chip_class_init,
.instance_init = pnv_chip_init,
.instance_size = sizeof(PnvChip),
.class_size = sizeof(PnvChipClass),
.abstract = true,
},
DEFINE_PNV_CHIP_TYPE(TYPE_PNV_CHIP_POWER9, pnv_chip_power9_class_init),
DEFINE_PNV_CHIP_TYPE(TYPE_PNV_CHIP_POWER8, pnv_chip_power8_class_init),
DEFINE_PNV_CHIP_TYPE(TYPE_PNV_CHIP_POWER8E, pnv_chip_power8e_class_init),
DEFINE_PNV_CHIP_TYPE(TYPE_PNV_CHIP_POWER8NVL,
pnv_chip_power8nvl_class_init),
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
};
DEFINE_TYPES(types)