mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7b14f23149
qemu/tests/qemu-iotests/082.out

787 lines
41 KiB
Plaintext
Raw Normal View History

qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
QA output created by 082
=== create: Options specified more than once ===
Testing: create -f foo -f qcow2 TEST_DIR/t.qcow2 128M
block: deprecate "encryption=on" in favor of "encrypt.format=aes" Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-23 19:24:06 +03:00
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
iotests: Use _img_info qemu-img info should only be used directly if the format-specific information or the name of the format is relevant (some tests explicitly test format-specific information; test 082 uses qcow2-specific settings to test the qemu-img interface); otherwise, tests should always use _img_info instead. Test 082 was touched only partially. It does test the qemu-img interface; however, its invocations of qemu-img info are not real tests but rather verifications, so if format-specific information is not important for the test, there is no reason not to use _img_info. In contrast to directly invoking qemu-img info, "qcow2" is replaced by "IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in _supported_fmt), I consider this an improvement. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:27 +04:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 65536
Testing: create -f qcow2 -o cluster_size=4k -o lazy_refcounts=on TEST_DIR/t.qcow2 128M
block: deprecate "encryption=on" in favor of "encrypt.format=aes" Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-23 19:24:06 +03:00
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 cluster_size=4096 lazy_refcounts=on refcount_bits=16
qemu-iotests: 082: Filter the real disk size The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-27 19:28:01 +03:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 4096
Format specific information:
compat: 1.1
lazy refcounts: true
qcow2: Add refcount_bits to format-specific info Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-10 23:28:44 +03:00
refcount bits: 16
qapi: Add corrupt field to ImageInfoSpecificQCow2 Just like lazy-refcounts, this field will be present iff the qcow2 compat level is 1.1 (or probably any future revision). As expected, this breaks some tests due to the new field present in qemu-img info output; so fix their output accordingly. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:28 +04:00
corrupt: false
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o cluster_size=4k -o lazy_refcounts=on -o cluster_size=8k TEST_DIR/t.qcow2 128M
block: deprecate "encryption=on" in favor of "encrypt.format=aes" Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-23 19:24:06 +03:00
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 cluster_size=8192 lazy_refcounts=on refcount_bits=16
qemu-iotests: 082: Filter the real disk size The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-27 19:28:01 +03:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 8192
Format specific information:
compat: 1.1
lazy refcounts: true
qcow2: Add refcount_bits to format-specific info Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-10 23:28:44 +03:00
refcount bits: 16
qapi: Add corrupt field to ImageInfoSpecificQCow2 Just like lazy-refcounts, this field will be present iff the qcow2 compat level is 1.1 (or probably any future revision). As expected, this breaks some tests due to the new field present in qemu-img info output; so fix their output accordingly. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:28 +04:00
corrupt: false
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o cluster_size=4k,cluster_size=8k TEST_DIR/t.qcow2 128M
block: deprecate "encryption=on" in favor of "encrypt.format=aes" Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-23 19:24:06 +03:00
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 cluster_size=8192 lazy_refcounts=off refcount_bits=16
iotests: Use _img_info qemu-img info should only be used directly if the format-specific information or the name of the format is relevant (some tests explicitly test format-specific information; test 082 uses qcow2-specific settings to test the qemu-img interface); otherwise, tests should always use _img_info instead. Test 082 was touched only partially. It does test the qemu-img interface; however, its invocations of qemu-img info are not real tests but rather verifications, so if format-specific information is not important for the test, there is no reason not to use _img_info. In contrast to directly invoking qemu-img info, "qcow2" is replaced by "IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in _supported_fmt), I consider this an improvement. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:27 +04:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 8192
=== create: help for -o ===
Testing: create -f qcow2 -o help TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o ? TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o cluster_size=4k,help TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o cluster_size=4k,? TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o help,cluster_size=4k TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o ?,cluster_size=4k TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o cluster_size=4k -o help TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o cluster_size=4k -o ? TEST_DIR/t.qcow2 128M
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
qemu-img: Check for backing image if specified during create Or, rather, force the open of a backing image if one was specified for creation. Using a similar -unsafe option as rebase, allow qemu-img to ignore the backing file validation if possible. It may not always be possible, as in the existing case when a filesize for the new image was not specified. This is accomplished by shifting around the conditionals in bdrv_img_create, such that a backing file is always opened unless we provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag when -u is provided to create. Sorry for the heinous looking diffstat, but it's mostly whitespace. Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786 Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-18 03:34:22 +03:00
Testing: create -f qcow2 -u -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 128M
block: deprecate "encryption=on" in favor of "encrypt.format=aes" Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-23 19:24:06 +03:00
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2,,help cluster_size=65536 lazy_refcounts=off refcount_bits=16
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
qemu-img: Check for backing image if specified during create Or, rather, force the open of a backing image if one was specified for creation. Using a similar -unsafe option as rebase, allow qemu-img to ignore the backing file validation if possible. It may not always be possible, as in the existing case when a filesize for the new image was not specified. This is accomplished by shifting around the conditionals in bdrv_img_create, such that a backing file is always opened unless we provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag when -u is provided to create. Sorry for the heinous looking diffstat, but it's mostly whitespace. Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786 Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-18 03:34:22 +03:00
Testing: create -f qcow2 -u -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 128M
block: deprecate "encryption=on" in favor of "encrypt.format=aes" Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-23 19:24:06 +03:00
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2,,? cluster_size=65536 lazy_refcounts=off refcount_bits=16
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -f qcow2 -o backing_file=TEST_DIR/t.qcow2, -o help TEST_DIR/t.qcow2 128M
qemu-img: Invalid option list: backing_file=TEST_DIR/t.qcow2,
Testing: create -f qcow2 -o backing_file=TEST_DIR/t.qcow2 -o ,help TEST_DIR/t.qcow2 128M
qemu-img: Invalid option list: ,help
Testing: create -f qcow2 -o backing_file=TEST_DIR/t.qcow2 -o ,, -o help TEST_DIR/t.qcow2 128M
qemu-img: Invalid option list: ,,
Testing: create -f qcow2 -o help
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: create -o help
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
iotests: Test help option for unsupporting formats This adds test cases to 082 for qemu-img create/convert/amend "-o help" on formats that do not support creation or amendment, respectively. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-7-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:22 +03:00
Testing: create -f bochs -o help
qemu-img: Format driver 'bochs' does not support image creation
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
=== convert: Options specified more than once ===
Testing: create -f qcow2 TEST_DIR/t.qcow2 128M
block: deprecate "encryption=on" in favor of "encrypt.format=aes" Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-23 19:24:06 +03:00
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -f foo -f qcow2 TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
iotests: Use _img_info qemu-img info should only be used directly if the format-specific information or the name of the format is relevant (some tests explicitly test format-specific information; test 082 uses qcow2-specific settings to test the qemu-img interface); otherwise, tests should always use _img_info instead. Test 082 was touched only partially. It does test the qemu-img interface; however, its invocations of qemu-img info are not real tests but rather verifications, so if format-specific information is not important for the test, there is no reason not to use _img_info. In contrast to directly invoking qemu-img info, "qcow2" is replaced by "IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in _supported_fmt), I consider this an improvement. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:27 +04:00
image: TEST_DIR/t.IMGFMT.base
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
file format: raw
virtual size: 128M (134217728 bytes)
Testing: convert -O foo -O qcow2 TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
iotests: Use _img_info qemu-img info should only be used directly if the format-specific information or the name of the format is relevant (some tests explicitly test format-specific information; test 082 uses qcow2-specific settings to test the qemu-img interface); otherwise, tests should always use _img_info instead. Test 082 was touched only partially. It does test the qemu-img interface; however, its invocations of qemu-img info are not real tests but rather verifications, so if format-specific information is not important for the test, there is no reason not to use _img_info. In contrast to directly invoking qemu-img info, "qcow2" is replaced by "IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in _supported_fmt), I consider this an improvement. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:27 +04:00
image: TEST_DIR/t.IMGFMT.base
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 65536
Testing: convert -O qcow2 -o cluster_size=4k -o lazy_refcounts=on TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-iotests: 082: Filter the real disk size The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-27 19:28:01 +03:00
image: TEST_DIR/t.IMGFMT.base
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 4096
Format specific information:
compat: 1.1
lazy refcounts: true
qcow2: Add refcount_bits to format-specific info Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-10 23:28:44 +03:00
refcount bits: 16
qapi: Add corrupt field to ImageInfoSpecificQCow2 Just like lazy-refcounts, this field will be present iff the qcow2 compat level is 1.1 (or probably any future revision). As expected, this breaks some tests due to the new field present in qemu-img info output; so fix their output accordingly. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:28 +04:00
corrupt: false
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o cluster_size=4k -o lazy_refcounts=on -o cluster_size=8k TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-iotests: 082: Filter the real disk size The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-27 19:28:01 +03:00
image: TEST_DIR/t.IMGFMT.base
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 8192
Format specific information:
compat: 1.1
lazy refcounts: true
qcow2: Add refcount_bits to format-specific info Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-10 23:28:44 +03:00
refcount bits: 16
qapi: Add corrupt field to ImageInfoSpecificQCow2 Just like lazy-refcounts, this field will be present iff the qcow2 compat level is 1.1 (or probably any future revision). As expected, this breaks some tests due to the new field present in qemu-img info output; so fix their output accordingly. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:28 +04:00
corrupt: false
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o cluster_size=4k,cluster_size=8k TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
iotests: Use _img_info qemu-img info should only be used directly if the format-specific information or the name of the format is relevant (some tests explicitly test format-specific information; test 082 uses qcow2-specific settings to test the qemu-img interface); otherwise, tests should always use _img_info instead. Test 082 was touched only partially. It does test the qemu-img interface; however, its invocations of qemu-img info are not real tests but rather verifications, so if format-specific information is not important for the test, there is no reason not to use _img_info. In contrast to directly invoking qemu-img info, "qcow2" is replaced by "IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in _supported_fmt), I consider this an improvement. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:27 +04:00
image: TEST_DIR/t.IMGFMT.base
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 8192
=== convert: help for -o ===
Testing: convert -O qcow2 -o help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o ? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o cluster_size=4k,help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o cluster_size=4k,? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o help,cluster_size=4k TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o ?,cluster_size=4k TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o cluster_size=4k -o help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o cluster_size=4k -o ? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,help': No such file or directory
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,?': No such file or directory
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2, -o help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-img: Invalid option list: backing_file=TEST_DIR/t.qcow2,
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2 -o ,help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-img: Invalid option list: ,help
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2 -o ,, -o help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-img: Invalid option list: ,,
Testing: convert -O qcow2 -o help
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -o help
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
iotests: Test help option for unsupporting formats This adds test cases to 082 for qemu-img create/convert/amend "-o help" on formats that do not support creation or amendment, respectively. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-7-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:22 +03:00
Testing: convert -O bochs -o help
qemu-img: Format driver 'bochs' does not support image creation
iotests: Add test for 'qemu-img convert -C' compatibility Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-27 06:34:02 +03:00
=== convert: -C and other options ===
Testing: convert -C -S 4k -O qcow2 TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.target
qemu-img: Cannot enable copy offloading when -S is used
Testing: convert -C -S 8k -O qcow2 TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.target
qemu-img: Cannot enable copy offloading when -S is used
Testing: convert -C -c -O qcow2 TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.target
qemu-img: Cannot enable copy offloading when -c is used
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
=== amend: Options specified more than once ===
Testing: amend -f foo -f qcow2 -o lazy_refcounts=on TEST_DIR/t.qcow2
qemu-iotests: 082: Filter the real disk size The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-27 19:28:01 +03:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 128M (134217728 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: true
qcow2: Add refcount_bits to format-specific info Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-10 23:28:44 +03:00
refcount bits: 16
qapi: Add corrupt field to ImageInfoSpecificQCow2 Just like lazy-refcounts, this field will be present iff the qcow2 compat level is 1.1 (or probably any future revision). As expected, this breaks some tests due to the new field present in qemu-img info output; so fix their output accordingly. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:28 +04:00
corrupt: false
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o size=130M -o lazy_refcounts=off TEST_DIR/t.qcow2
qemu-iotests: 082: Filter the real disk size The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-27 19:28:01 +03:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 130M (136314880 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: false
qcow2: Add refcount_bits to format-specific info Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-10 23:28:44 +03:00
refcount bits: 16
qapi: Add corrupt field to ImageInfoSpecificQCow2 Just like lazy-refcounts, this field will be present iff the qcow2 compat level is 1.1 (or probably any future revision). As expected, this breaks some tests due to the new field present in qemu-img info output; so fix their output accordingly. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:28 +04:00
corrupt: false
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o size=8M -o lazy_refcounts=on -o size=132M TEST_DIR/t.qcow2
qemu-iotests: 082: Filter the real disk size The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-27 19:28:01 +03:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 132M (138412032 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: true
qcow2: Add refcount_bits to format-specific info Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-10 23:28:44 +03:00
refcount bits: 16
qapi: Add corrupt field to ImageInfoSpecificQCow2 Just like lazy-refcounts, this field will be present iff the qcow2 compat level is 1.1 (or probably any future revision). As expected, this breaks some tests due to the new field present in qemu-img info output; so fix their output accordingly. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:28 +04:00
corrupt: false
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o size=4M,size=148M TEST_DIR/t.qcow2
iotests: Use _img_info qemu-img info should only be used directly if the format-specific information or the name of the format is relevant (some tests explicitly test format-specific information; test 082 uses qcow2-specific settings to test the qemu-img interface); otherwise, tests should always use _img_info instead. Test 082 was touched only partially. It does test the qemu-img interface; however, its invocations of qemu-img info are not real tests but rather verifications, so if format-specific information is not important for the test, there is no reason not to use _img_info. In contrast to directly invoking qemu-img info, "qcow2" is replaced by "IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in _supported_fmt), I consider this an improvement. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-30 23:31:27 +04:00
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
virtual size: 148M (155189248 bytes)
cluster_size: 65536
=== amend: help for -o ===
Testing: amend -f qcow2 -o help TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o ? TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o cluster_size=4k,help TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o cluster_size=4k,? TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o help,cluster_size=4k TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o ?,cluster_size=4k TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o cluster_size=4k -o help TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o cluster_size=4k -o ? TEST_DIR/t.qcow2
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2
Testing: rebase -u -b -f qcow2 TEST_DIR/t.qcow2
Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2
Testing: rebase -u -b -f qcow2 TEST_DIR/t.qcow2
Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2, -o help TEST_DIR/t.qcow2
qemu-img: Invalid option list: backing_file=TEST_DIR/t.qcow2,
Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2 -o ,help TEST_DIR/t.qcow2
qemu-img: Invalid option list: ,help
Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2 -o ,, -o help TEST_DIR/t.qcow2
qemu-img: Invalid option list: ,,
Testing: amend -f qcow2 -o help
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Creation options for 'qcow2':
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
backing_file=<str> - File name of a base image
backing_fmt=<str> - Image format of the base image
cluster_size=<size> - qcow2 cluster size
compat=<str> - Compatibility level (0.10 or 1.1)
encrypt.cipher-alg=<str> - Name of encryption cipher algorithm
encrypt.cipher-mode=<str> - Name of encryption cipher mode
encrypt.format=<str> - Encrypt the image, format choices: 'aes', 'luks'
encrypt.hash-alg=<str> - Name of encryption hash algorithm
encrypt.iter-time=<num> - Time to spend in PBKDF in milliseconds
encrypt.ivgen-alg=<str> - Name of IV generator algorithm
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
refcount_bits=<num> - Width of a reference count entry in bits
size=<size> - Virtual disk size
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
qemu-img: Add print_amend_option_help() The more generic print_block_option_help() function is not really suitable for qemu-img amend, for a couple of reasons: (1) We do not need to append the protocol-level options, as amendment happens only on one node and does not descend downwards to its children. (2) print_block_option_help() says those options are "supported". For option amendment, we do not really know that. So this new function explicitly says that those options are the creation options, and not all of them may be supported. (3) If the driver does not support option amendment, we should not print anything (except for an error message that amendment is not supported). Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-5-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:20 +03:00
Note that not all of these options may be amendable.
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
Testing: convert -o help
Supported options:
option: Make option help nicer to read This adds some whitespace into the option help (including indentation) and puts angle brackets around the type names. Furthermore, the list name is no longer printed as part of every line, but only once in advance, and only if the caller did not print a caption already. This patch also restores the description alignment we had before commit 9cbef9d68ee1d8d0, just at 24 instead of 16 characters like we used to. This increase is because now we have the type and two spaces of indentation before the description, and with a usual type name length of three chracters, this sums up to eight additional characters -- which means that we now need 24 characters to get the same amount of padding for most options. Also, 24 is a third of 80, which makes it kind of a round number in terminal terms. Finally, this patch amends the reference output of iotest 082 to match the changes (and thus makes it pass again). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-19 19:49:25 +03:00
size=<size> - Virtual disk size
iotests: Test help option for unsupporting formats This adds test cases to 082 for qemu-img create/convert/amend "-o help" on formats that do not support creation or amendment, respectively. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509210023.20283-7-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-10 00:00:22 +03:00
Testing: amend -f bochs -o help
qemu-img: Format driver 'bochs' does not support option amendment
qemu-iotests: Check qemu-img command line parsing Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21 19:24:08 +04:00
*** done
Reference in New Issue Copy Permalink