qemu/net/net.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

2132 lines
56 KiB
C
Raw Normal View History

/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "net/net.h"
#include "clients.h"
#include "hub.h"
#include "hw/qdev-properties.h"
#include "net/slirp.h"
#include "net/eth.h"
#include "util.h"
#include "monitor/monitor.h"
#include "qemu/help_option.h"
#include "qapi/qapi-commands-net.h"
#include "qapi/qapi-visit-net.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "qemu/sockets.h"
#include "qemu/cutils.h"
#include "qemu/config-file.h"
#include "qemu/ctype.h"
#include "qemu/id.h"
#include "qemu/iov.h"
#include "qemu/qemu-print.h"
#include "qemu/main-loop.h"
#include "qemu/option.h"
qapi: net: add stream and dgram netdevs Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:11 +03:00
#include "qemu/keyval.h"
#include "qapi/error.h"
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
#include "qapi/opts-visitor.h"
#include "sysemu/runstate.h"
Add the function of colo_compare_cleanup This patch fixes the following: #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007f6ae4559859 in __GI_abort () at abort.c:79 #2 0x0000559aaa386720 in error_exit (err=16, msg=0x559aaa5973d0 <__func__.16227> "qemu_mutex_destroy") at util/qemu-thread-posix.c:36 #3 0x0000559aaa3868c5 in qemu_mutex_destroy (mutex=0x559aabffe828) at util/qemu-thread-posix.c:69 #4 0x0000559aaa2f93a8 in char_finalize (obj=0x559aabffe800) at chardev/char.c:285 #5 0x0000559aaa23318a in object_deinit (obj=0x559aabffe800, type=0x559aabfd7d20) at qom/object.c:606 #6 0x0000559aaa2331b8 in object_deinit (obj=0x559aabffe800, type=0x559aabfd9060) at qom/object.c:610 #7 0x0000559aaa233200 in object_finalize (data=0x559aabffe800) at qom/object.c:620 #8 0x0000559aaa234202 in object_unref (obj=0x559aabffe800) at qom/object.c:1074 #9 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0dac10, name=0x559aac778760 "compare0-0", opaque=0x559aabffe800) at qom/object.c:1584 #10 0x0000559aaa232f70 in object_property_del_all (obj=0x559aac0dac10) at qom/object.c:557 #11 0x0000559aaa2331ed in object_finalize (data=0x559aac0dac10) at qom/object.c:619 #12 0x0000559aaa234202 in object_unref (obj=0x559aac0dac10) at qom/object.c:1074 #13 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0c75c0, name=0x559aac0dadc0 "chardevs", opaque=0x559aac0dac10) at qom/object.c:1584 #14 0x0000559aaa233071 in object_property_del_child (obj=0x559aac0c75c0, child=0x559aac0dac10, errp=0x0) at qom/object.c:580 #15 0x0000559aaa233155 in object_unparent (obj=0x559aac0dac10) at qom/object.c:599 #16 0x0000559aaa2fb721 in qemu_chr_cleanup () at chardev/char.c:1159 #17 0x0000559aa9f9b110 in main (argc=54, argv=0x7ffeb62fa998, envp=0x7ffeb62fab50) at vl.c:4539 When chardev is cleaned up, chr_write_lock needs to be destroyed. But the colo-compare module is not cleaned up normally before it when the guest poweroff. It is holding chr_write_lock at this time. This will cause qemu crash.So we add the function of colo_compare_cleanup() before qemu_chr_cleanup() to fix the bug. Signed-off-by: Lei Rao <lei.rao@intel.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-08 11:23:30 +03:00
#include "net/colo-compare.h"
#include "net/filter.h"
#include "qapi/string-output-visitor.h"
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
#include "qapi/qobject-input-visitor.h"
/* Net bridge is currently not supported for W32. */
#if !defined(_WIN32)
# define CONFIG_NET_BRIDGE
#endif
static VMChangeStateEntry *net_change_state_entry;
NetClientStateList net_clients;
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
typedef struct NetdevQueueEntry {
Netdev *nd;
Location loc;
QSIMPLEQ_ENTRY(NetdevQueueEntry) entry;
} NetdevQueueEntry;
typedef QSIMPLEQ_HEAD(, NetdevQueueEntry) NetdevQueue;
static NetdevQueue nd_queue = QSIMPLEQ_HEAD_INITIALIZER(nd_queue);
static GHashTable *nic_model_help;
/***********************************************************/
/* network device redirectors */
int convert_host_port(struct sockaddr_in *saddr, const char *host,
const char *port, Error **errp)
{
struct hostent *he;
const char *r;
long p;
memset(saddr, 0, sizeof(*saddr));
saddr->sin_family = AF_INET;
if (host[0] == '\0') {
saddr->sin_addr.s_addr = 0;
} else {
if (qemu_isdigit(host[0])) {
if (!inet_aton(host, &saddr->sin_addr)) {
error_setg(errp, "host address '%s' is not a valid "
"IPv4 address", host);
return -1;
}
} else {
he = gethostbyname(host);
if (he == NULL) {
error_setg(errp, "can't resolve host address '%s'", host);
return -1;
}
saddr->sin_addr = *(struct in_addr *)he->h_addr;
}
}
if (qemu_strtol(port, &r, 0, &p) != 0) {
error_setg(errp, "port number '%s' is invalid", port);
return -1;
}
saddr->sin_port = htons(p);
return 0;
}
int parse_host_port(struct sockaddr_in *saddr, const char *str,
Error **errp)
{
gchar **substrings;
int ret;
substrings = g_strsplit(str, ":", 2);
if (!substrings || !substrings[0] || !substrings[1]) {
error_setg(errp, "host address '%s' doesn't contain ':' "
"separating host from port", str);
ret = -1;
goto out;
}
ret = convert_host_port(saddr, substrings[0], substrings[1], errp);
out:
g_strfreev(substrings);
return ret;
}
char *qemu_mac_strdup_printf(const uint8_t *macaddr)
{
return g_strdup_printf("%.2x:%.2x:%.2x:%.2x:%.2x:%.2x",
macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]);
}
void qemu_set_info_str(NetClientState *nc, const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
vsnprintf(nc->info_str, sizeof(nc->info_str), fmt, ap);
va_end(ap);
}
void qemu_format_nic_info_str(NetClientState *nc, uint8_t macaddr[6])
{
qemu_set_info_str(nc, "model=%s,macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
nc->model, macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]);
}
static int mac_table[256] = {0};
static void qemu_macaddr_set_used(MACAddr *macaddr)
{
int index;
for (index = 0x56; index < 0xFF; index++) {
if (macaddr->a[5] == index) {
mac_table[index]++;
}
}
}
static void qemu_macaddr_set_free(MACAddr *macaddr)
{
int index;
static const MACAddr base = { .a = { 0x52, 0x54, 0x00, 0x12, 0x34, 0 } };
if (memcmp(macaddr->a, &base.a, (sizeof(base.a) - 1)) != 0) {
return;
}
for (index = 0x56; index < 0xFF; index++) {
if (macaddr->a[5] == index) {
mac_table[index]--;
}
}
}
static int qemu_macaddr_get_free(void)
{
int index;
for (index = 0x56; index < 0xFF; index++) {
if (mac_table[index] == 0) {
return index;
}
}
return -1;
}
void qemu_macaddr_default_if_unset(MACAddr *macaddr)
{
static const MACAddr zero = { .a = { 0,0,0,0,0,0 } };
static const MACAddr base = { .a = { 0x52, 0x54, 0x00, 0x12, 0x34, 0 } };
if (memcmp(macaddr, &zero, sizeof(zero)) != 0) {
if (memcmp(macaddr->a, &base.a, (sizeof(base.a) - 1)) != 0) {
return;
} else {
qemu_macaddr_set_used(macaddr);
return;
}
}
macaddr->a[0] = 0x52;
macaddr->a[1] = 0x54;
macaddr->a[2] = 0x00;
macaddr->a[3] = 0x12;
macaddr->a[4] = 0x34;
macaddr->a[5] = qemu_macaddr_get_free();
qemu_macaddr_set_used(macaddr);
}
/**
* Generate a name for net client
*
* Only net clients created with the legacy -net option and NICs need this.
*/
static char *assign_name(NetClientState *nc1, const char *model)
{
NetClientState *nc;
int id = 0;
QTAILQ_FOREACH(nc, &net_clients, next) {
if (nc == nc1) {
continue;
}
if (strcmp(nc->model, model) == 0) {
id++;
}
}
return g_strdup_printf("%s.%d", model, id);
}
static void qemu_net_client_destructor(NetClientState *nc)
{
g_free(nc);
}
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 06:53:43 +03:00
static ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque);
static void qemu_net_client_setup(NetClientState *nc,
NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name,
NetClientDestructor *destructor,
bool is_datapath)
{
nc->info = info;
nc->model = g_strdup(model);
if (name) {
nc->name = g_strdup(name);
} else {
nc->name = assign_name(nc, model);
}
if (peer) {
assert(!peer->peer);
nc->peer = peer;
peer->peer = nc;
}
QTAILQ_INSERT_TAIL(&net_clients, nc, next);
nc->incoming_queue = qemu_new_net_queue(qemu_deliver_packet_iov, nc);
nc->destructor = destructor;
nc->is_datapath = is_datapath;
QTAILQ_INIT(&nc->filters);
}
NetClientState *qemu_new_net_client(NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name)
{
NetClientState *nc;
assert(info->size >= sizeof(NetClientState));
nc = g_malloc0(info->size);
qemu_net_client_setup(nc, info, peer, model, name,
qemu_net_client_destructor, true);
return nc;
}
NetClientState *qemu_new_net_control_client(NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name)
{
NetClientState *nc;
assert(info->size >= sizeof(NetClientState));
nc = g_malloc0(info->size);
qemu_net_client_setup(nc, info, peer, model, name,
qemu_net_client_destructor, false);
return nc;
}
NICState *qemu_new_nic(NetClientInfo *info,
NICConf *conf,
const char *model,
const char *name,
MemReentrancyGuard *reentrancy_guard,
void *opaque)
{
NetClientState **peers = conf->peers.ncs;
NICState *nic;
int i, queues = MAX(1, conf->peers.queues);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(info->type == NET_CLIENT_DRIVER_NIC);
assert(info->size >= sizeof(NICState));
nic = g_malloc0(info->size + sizeof(NetClientState) * queues);
nic->ncs = (void *)nic + info->size;
nic->conf = conf;
nic->reentrancy_guard = reentrancy_guard,
nic->opaque = opaque;
for (i = 0; i < queues; i++) {
qemu_net_client_setup(&nic->ncs[i], info, peers[i], model, name,
NULL, true);
nic->ncs[i].queue_index = i;
}
return nic;
}
NetClientState *qemu_get_subqueue(NICState *nic, int queue_index)
{
return nic->ncs + queue_index;
}
NetClientState *qemu_get_queue(NICState *nic)
{
return qemu_get_subqueue(nic, 0);
}
NICState *qemu_get_nic(NetClientState *nc)
{
NetClientState *nc0 = nc - nc->queue_index;
return (NICState *)((void *)nc0 - nc->info->size);
}
void *qemu_get_nic_opaque(NetClientState *nc)
{
NICState *nic = qemu_get_nic(nc);
return nic->opaque;
}
NetClientState *qemu_get_peer(NetClientState *nc, int queue_index)
{
assert(nc != NULL);
NetClientState *ncs = nc + queue_index;
return ncs->peer;
}
static void qemu_cleanup_net_client(NetClientState *nc)
{
QTAILQ_REMOVE(&net_clients, nc, next);
if (nc->info->cleanup) {
nc->info->cleanup(nc);
}
}
static void qemu_free_net_client(NetClientState *nc)
{
if (nc->incoming_queue) {
qemu_del_net_queue(nc->incoming_queue);
}
if (nc->peer) {
nc->peer->peer = NULL;
}
g_free(nc->name);
g_free(nc->model);
if (nc->destructor) {
nc->destructor(nc);
}
}
void qemu_del_net_client(NetClientState *nc)
{
NetClientState *ncs[MAX_QUEUE_NUM];
int queues, i;
NetFilterState *nf, *next;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(nc->info->type != NET_CLIENT_DRIVER_NIC);
/* If the NetClientState belongs to a multiqueue backend, we will change all
* other NetClientStates also.
*/
queues = qemu_find_net_clients_except(nc->name, ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NET_CLIENT_DRIVER_NIC,
MAX_QUEUE_NUM);
assert(queues != 0);
QTAILQ_FOREACH_SAFE(nf, &nc->filters, next, next) {
object_unparent(OBJECT(nf));
}
/* If there is a peer NIC, delete and cleanup client, but do not free. */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
NICState *nic = qemu_get_nic(nc->peer);
if (nic->peer_deleted) {
return;
}
nic->peer_deleted = true;
for (i = 0; i < queues; i++) {
ncs[i]->peer->link_down = true;
}
if (nc->peer->info->link_status_changed) {
nc->peer->info->link_status_changed(nc->peer);
}
for (i = 0; i < queues; i++) {
qemu_cleanup_net_client(ncs[i]);
}
return;
}
for (i = 0; i < queues; i++) {
qemu_cleanup_net_client(ncs[i]);
qemu_free_net_client(ncs[i]);
}
}
void qemu_del_nic(NICState *nic)
{
int i, queues = MAX(nic->conf->peers.queues, 1);
qemu_macaddr_set_free(&nic->conf->macaddr);
for (i = 0; i < queues; i++) {
NetClientState *nc = qemu_get_subqueue(nic, i);
/* If this is a peer NIC and peer has already been deleted, free it now. */
if (nic->peer_deleted) {
qemu_free_net_client(nc->peer);
} else if (nc->peer) {
/* if there are RX packets pending, complete them */
qemu_purge_queued_packets(nc->peer);
}
}
for (i = queues - 1; i >= 0; i--) {
NetClientState *nc = qemu_get_subqueue(nic, i);
qemu_cleanup_net_client(nc);
qemu_free_net_client(nc);
}
g_free(nic);
}
void qemu_foreach_nic(qemu_nic_foreach func, void *opaque)
{
NetClientState *nc;
QTAILQ_FOREACH(nc, &net_clients, next) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC) {
if (nc->queue_index == 0) {
func(qemu_get_nic(nc), opaque);
}
}
}
}
bool qemu_has_ufo(NetClientState *nc)
{
if (!nc || !nc->info->has_ufo) {
return false;
}
return nc->info->has_ufo(nc);
}
bool qemu_has_uso(NetClientState *nc)
{
if (!nc || !nc->info->has_uso) {
return false;
}
return nc->info->has_uso(nc);
}
bool qemu_has_vnet_hdr(NetClientState *nc)
{
if (!nc || !nc->info->has_vnet_hdr) {
return false;
}
return nc->info->has_vnet_hdr(nc);
}
bool qemu_has_vnet_hdr_len(NetClientState *nc, int len)
{
if (!nc || !nc->info->has_vnet_hdr_len) {
return false;
}
return nc->info->has_vnet_hdr_len(nc, len);
}
bool qemu_get_using_vnet_hdr(NetClientState *nc)
{
if (!nc || !nc->info->get_using_vnet_hdr) {
return false;
}
return nc->info->get_using_vnet_hdr(nc);
}
void qemu_using_vnet_hdr(NetClientState *nc, bool enable)
{
if (!nc || !nc->info->using_vnet_hdr) {
return;
}
nc->info->using_vnet_hdr(nc, enable);
}
void qemu_set_offload(NetClientState *nc, int csum, int tso4, int tso6,
int ecn, int ufo, int uso4, int uso6)
{
if (!nc || !nc->info->set_offload) {
return;
}
nc->info->set_offload(nc, csum, tso4, tso6, ecn, ufo, uso4, uso6);
}
int qemu_get_vnet_hdr_len(NetClientState *nc)
{
if (!nc || !nc->info->get_vnet_hdr_len) {
return 0;
}
return nc->info->get_vnet_hdr_len(nc);
}
void qemu_set_vnet_hdr_len(NetClientState *nc, int len)
{
if (!nc || !nc->info->set_vnet_hdr_len) {
return;
}
nc->vnet_hdr_len = len;
nc->info->set_vnet_hdr_len(nc, len);
}
int qemu_set_vnet_le(NetClientState *nc, bool is_le)
{
#if HOST_BIG_ENDIAN
if (!nc || !nc->info->set_vnet_le) {
return -ENOSYS;
}
return nc->info->set_vnet_le(nc, is_le);
#else
return 0;
#endif
}
int qemu_set_vnet_be(NetClientState *nc, bool is_be)
{
#if HOST_BIG_ENDIAN
return 0;
#else
if (!nc || !nc->info->set_vnet_be) {
return -ENOSYS;
}
return nc->info->set_vnet_be(nc, is_be);
#endif
}
int qemu_can_receive_packet(NetClientState *nc)
{
if (nc->receive_disabled) {
return 0;
} else if (nc->info->can_receive &&
!nc->info->can_receive(nc)) {
return 0;
}
return 1;
}
int qemu_can_send_packet(NetClientState *sender)
{
int vm_running = runstate_is_running();
if (!vm_running) {
return 0;
}
if (!sender->peer) {
return 1;
}
return qemu_can_receive_packet(sender->peer);
}
static ssize_t filter_receive_iov(NetClientState *nc,
NetFilterDirection direction,
NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
NetPacketSent *sent_cb)
{
ssize_t ret = 0;
NetFilterState *nf = NULL;
if (direction == NET_FILTER_DIRECTION_TX) {
QTAILQ_FOREACH(nf, &nc->filters, next) {
ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
iovcnt, sent_cb);
if (ret) {
return ret;
}
}
} else {
QTAILQ_FOREACH_REVERSE(nf, &nc->filters, next) {
ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
iovcnt, sent_cb);
if (ret) {
return ret;
}
}
}
return ret;
}
static ssize_t filter_receive(NetClientState *nc,
NetFilterDirection direction,
NetClientState *sender,
unsigned flags,
const uint8_t *data,
size_t size,
NetPacketSent *sent_cb)
{
struct iovec iov = {
.iov_base = (void *)data,
.iov_len = size
};
return filter_receive_iov(nc, direction, sender, flags, &iov, 1, sent_cb);
}
void qemu_purge_queued_packets(NetClientState *nc)
{
if (!nc->peer) {
return;
}
qemu_net_queue_purge(nc->peer->incoming_queue, nc);
}
void qemu_flush_or_purge_queued_packets(NetClientState *nc, bool purge)
{
nc->receive_disabled = 0;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_HUBPORT) {
if (net_hub_flush(nc->peer)) {
qemu_notify_event();
}
}
if (qemu_net_queue_flush(nc->incoming_queue)) {
/* We emptied the queue successfully, signal to the IO thread to repoll
* the file descriptor (for tap, for example).
*/
qemu_notify_event();
} else if (purge) {
/* Unable to empty the queue, purge remaining packets */
qemu_net_queue_purge(nc->incoming_queue, nc->peer);
}
}
void qemu_flush_queued_packets(NetClientState *nc)
{
qemu_flush_or_purge_queued_packets(nc, false);
}
static ssize_t qemu_send_packet_async_with_flags(NetClientState *sender,
unsigned flags,
const uint8_t *buf, int size,
NetPacketSent *sent_cb)
{
NetQueue *queue;
int ret;
#ifdef DEBUG_NET
printf("qemu_send_packet_async:\n");
qemu_hexdump(stdout, "net", buf, size);
#endif
if (sender->link_down || !sender->peer) {
return size;
}
/* Let filters handle the packet first */
ret = filter_receive(sender, NET_FILTER_DIRECTION_TX,
sender, flags, buf, size, sent_cb);
if (ret) {
return ret;
}
ret = filter_receive(sender->peer, NET_FILTER_DIRECTION_RX,
sender, flags, buf, size, sent_cb);
if (ret) {
return ret;
}
queue = sender->peer->incoming_queue;
return qemu_net_queue_send(queue, sender, flags, buf, size, sent_cb);
}
ssize_t qemu_send_packet_async(NetClientState *sender,
const uint8_t *buf, int size,
NetPacketSent *sent_cb)
{
return qemu_send_packet_async_with_flags(sender, QEMU_NET_PACKET_FLAG_NONE,
buf, size, sent_cb);
}
ssize_t qemu_send_packet(NetClientState *nc, const uint8_t *buf, int size)
{
return qemu_send_packet_async(nc, buf, size, NULL);
}
ssize_t qemu_receive_packet(NetClientState *nc, const uint8_t *buf, int size)
{
if (!qemu_can_receive_packet(nc)) {
return 0;
}
return qemu_net_queue_receive(nc->incoming_queue, buf, size);
}
ssize_t qemu_receive_packet_iov(NetClientState *nc, const struct iovec *iov,
int iovcnt)
{
if (!qemu_can_receive_packet(nc)) {
return 0;
}
return qemu_net_queue_receive_iov(nc->incoming_queue, iov, iovcnt);
}
ssize_t qemu_send_packet_raw(NetClientState *nc, const uint8_t *buf, int size)
{
return qemu_send_packet_async_with_flags(nc, QEMU_NET_PACKET_FLAG_RAW,
buf, size, NULL);
}
static ssize_t nc_sendv_compat(NetClientState *nc, const struct iovec *iov,
int iovcnt, unsigned flags)
{
uint8_t *buf = NULL;
uint8_t *buffer;
size_t offset;
ssize_t ret;
if (iovcnt == 1) {
buffer = iov[0].iov_base;
offset = iov[0].iov_len;
} else {
offset = iov_size(iov, iovcnt);
if (offset > NET_BUFSIZE) {
return -1;
}
buf = g_malloc(offset);
buffer = buf;
offset = iov_to_buf(iov, iovcnt, 0, buf, offset);
}
if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
ret = nc->info->receive_raw(nc, buffer, offset);
} else {
ret = nc->info->receive(nc, buffer, offset);
}
g_free(buf);
return ret;
}
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 06:53:43 +03:00
static ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque)
{
MemReentrancyGuard *owned_reentrancy_guard;
NetClientState *nc = opaque;
int ret;
if (nc->link_down) {
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 06:53:43 +03:00
return iov_size(iov, iovcnt);
}
if (nc->receive_disabled) {
return 0;
}
if (nc->info->type != NET_CLIENT_DRIVER_NIC ||
qemu_get_nic(nc)->reentrancy_guard->engaged_in_io) {
owned_reentrancy_guard = NULL;
} else {
owned_reentrancy_guard = qemu_get_nic(nc)->reentrancy_guard;
owned_reentrancy_guard->engaged_in_io = true;
}
if (nc->info->receive_iov && !(flags & QEMU_NET_PACKET_FLAG_RAW)) {
ret = nc->info->receive_iov(nc, iov, iovcnt);
} else {
ret = nc_sendv_compat(nc, iov, iovcnt, flags);
}
if (owned_reentrancy_guard) {
owned_reentrancy_guard->engaged_in_io = false;
}
if (ret == 0) {
nc->receive_disabled = 1;
}
return ret;
}
ssize_t qemu_sendv_packet_async(NetClientState *sender,
const struct iovec *iov, int iovcnt,
NetPacketSent *sent_cb)
{
NetQueue *queue;
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 06:53:43 +03:00
size_t size = iov_size(iov, iovcnt);
int ret;
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 06:53:43 +03:00
if (size > NET_BUFSIZE) {
return size;
}
if (sender->link_down || !sender->peer) {
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 06:53:43 +03:00
return size;
}
/* Let filters handle the packet first */
ret = filter_receive_iov(sender, NET_FILTER_DIRECTION_TX, sender,
QEMU_NET_PACKET_FLAG_NONE, iov, iovcnt, sent_cb);
if (ret) {
return ret;
}
ret = filter_receive_iov(sender->peer, NET_FILTER_DIRECTION_RX, sender,
QEMU_NET_PACKET_FLAG_NONE, iov, iovcnt, sent_cb);
if (ret) {
return ret;
}
queue = sender->peer->incoming_queue;
return qemu_net_queue_send_iov(queue, sender,
QEMU_NET_PACKET_FLAG_NONE,
iov, iovcnt, sent_cb);
}
ssize_t
qemu_sendv_packet(NetClientState *nc, const struct iovec *iov, int iovcnt)
{
return qemu_sendv_packet_async(nc, iov, iovcnt, NULL);
}
NetClientState *qemu_find_netdev(const char *id)
{
NetClientState *nc;
QTAILQ_FOREACH(nc, &net_clients, next) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC)
Fix netdev name lookup in -device, device_add, netdev_del qemu_find_netdev() looks up members of non_vlan_clients by name. It happily returns the first match. Trouble is the names need not be unique. non_vlan_clients contains host parts (netdevs) and guest parts (NICs). Netdevs have unique names: a netdev's name is a (mandatory) qemu_netdev_opts ID, and these are unique. NIC names are not unique. If a NIC has a qdev ID (which is unique), that's its name. Else, we make up a name. The made-up names are unique, but they can clash with qdev IDs. Even if NICs had unique names, they could still clash with netdev names. Callers of qemu_find_netdev(): * net_init_nic() wants a netdev. It happens to work because it runs before NICs get added to non_vlan_clients. * do_netdev_del() wants a netdev. If it gets a NIC, it complains and fails. Bug: a netdev with the same name that comes later in non_vlan_clients can't be deleted: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -netdev user,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=virtio1 [...] (qemu) netdev_add user,id=virtio1 (qemu) info network Devices not on any VLAN: hostnet0: net=10.0.2.0, restricted=n peer=virtio1 virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=hostnet0 virtio1: net=10.0.2.0, restricted=n (qemu) netdev_del virtio1 Device 'virtio1' not found * parse_netdev() wants a netdev. If it gets a NIC, it gets confused. With the test setup above: (qemu) device_add virtio-net-pci,netdev=virtio1 Property 'virtio-net-pci.netdev' can't take value 'virtio1', it's in use You can even connect two NICs to each other: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -device virtio-net-pci,id=virtio1 -device e1000,netdev=virtio1 [...] Devices not on any VLAN: virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=e1000.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 peer=virtio1 (qemu) q Segmentation fault (core dumped) * do_set_link() works fine for both netdevs and NICs. Whether it really makes sense for netdevs is debatable, but that's outside this patch's scope. Change qemu_find_netdev() to return only netdevs. This fixes the netdev_del and device_add/-device bugs demonstrated above. To avoid changing set_link, make do_set_link() search non_vlan_clients by hand instead of calling qemu_find_netdev(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-16 20:45:37 +04:00
continue;
if (!strcmp(nc->name, id)) {
return nc;
}
}
return NULL;
}
int qemu_find_net_clients_except(const char *id, NetClientState **ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NetClientDriver type, int max)
{
NetClientState *nc;
int ret = 0;
QTAILQ_FOREACH(nc, &net_clients, next) {
if (nc->info->type == type) {
continue;
}
if (!id || !strcmp(nc->name, id)) {
if (ret < max) {
ncs[ret] = nc;
}
ret++;
}
}
return ret;
}
static int nic_get_free_idx(void)
{
int index;
for (index = 0; index < MAX_NICS; index++)
if (!nd_table[index].used)
return index;
return -1;
}
GPtrArray *qemu_get_nic_models(const char *device_type)
{
GPtrArray *nic_models = g_ptr_array_new();
GSList *list = object_class_get_list_sorted(device_type, false);
while (list) {
DeviceClass *dc = OBJECT_CLASS_CHECK(DeviceClass, list->data,
TYPE_DEVICE);
GSList *next;
if (test_bit(DEVICE_CATEGORY_NETWORK, dc->categories) &&
dc->user_creatable) {
const char *name = object_class_get_name(list->data);
/*
* A network device might also be something else than a NIC, see
* e.g. the "rocker" device. Thus we have to look for the "netdev"
* property, too. Unfortunately, some devices like virtio-net only
* create this property during instance_init, so we have to create
* a temporary instance here to be able to check it.
*/
Object *obj = object_new_with_class(OBJECT_CLASS(dc));
if (object_property_find(obj, "netdev")) {
g_ptr_array_add(nic_models, (gpointer)name);
}
object_unref(obj);
}
next = list->next;
g_slist_free_1(list);
list = next;
}
g_ptr_array_add(nic_models, NULL);
return nic_models;
}
int qemu_show_nic_models(const char *arg, const char *const *models)
{
int i;
if (!arg || !is_help_option(arg)) {
return 0;
}
printf("Available NIC models:\n");
for (i = 0 ; models[i]; i++) {
printf("%s\n", models[i]);
}
return 1;
}
int qemu_find_nic_model(NICInfo *nd, const char * const *models,
const char *default_model)
{
int i;
if (!nd->model)
nd->model = g_strdup(default_model);
for (i = 0 ; models[i]; i++) {
if (strcmp(nd->model, models[i]) == 0)
return i;
}
error_report("Unsupported NIC model: %s", nd->model);
return -1;
}
static int net_init_nic(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
int idx;
NICInfo *nd;
const NetLegacyNicOptions *nic;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(netdev->type == NET_CLIENT_DRIVER_NIC);
nic = &netdev->u.nic;
idx = nic_get_free_idx();
if (idx == -1 || nb_nics >= MAX_NICS) {
error_setg(errp, "too many NICs");
return -1;
}
nd = &nd_table[idx];
memset(nd, 0, sizeof(*nd));
if (nic->netdev) {
nd->netdev = qemu_find_netdev(nic->netdev);
if (!nd->netdev) {
error_setg(errp, "netdev '%s' not found", nic->netdev);
return -1;
}
} else {
assert(peer);
nd->netdev = peer;
}
nd->name = g_strdup(name);
if (nic->model) {
nd->model = g_strdup(nic->model);
}
if (nic->addr) {
nd->devaddr = g_strdup(nic->addr);
}
if (nic->macaddr &&
net_parse_macaddr(nd->macaddr.a, nic->macaddr) < 0) {
error_setg(errp, "invalid syntax for ethernet address");
return -1;
}
if (nic->macaddr &&
is_multicast_ether_addr(nd->macaddr.a)) {
error_setg(errp,
"NIC cannot have multicast MAC address (odd 1st byte)");
return -1;
}
qemu_macaddr_default_if_unset(&nd->macaddr);
if (nic->has_vectors) {
if (nic->vectors > 0x7ffffff) {
error_setg(errp, "invalid # of vectors: %"PRIu32, nic->vectors);
return -1;
}
nd->nvectors = nic->vectors;
} else {
nd->nvectors = DEV_NVECTORS_UNSPECIFIED;
}
nd->used = 1;
nb_nics++;
return idx;
}
static gboolean add_nic_result(gpointer key, gpointer value, gpointer user_data)
{
GPtrArray *results = user_data;
GPtrArray *alias_list = value;
const char *model = key;
char *result;
if (!alias_list) {
result = g_strdup(model);
} else {
GString *result_str = g_string_new(model);
int i;
g_string_append(result_str, " (aka ");
for (i = 0; i < alias_list->len; i++) {
if (i) {
g_string_append(result_str, ", ");
}
g_string_append(result_str, alias_list->pdata[i]);
}
g_string_append(result_str, ")");
result = result_str->str;
g_string_free(result_str, false);
g_ptr_array_unref(alias_list);
}
g_ptr_array_add(results, result);
return true;
}
static int model_cmp(char **a, char **b)
{
return strcmp(*a, *b);
}
static void show_nic_models(void)
{
GPtrArray *results = g_ptr_array_new();
int i;
g_hash_table_foreach_remove(nic_model_help, add_nic_result, results);
g_ptr_array_sort(results, (GCompareFunc)model_cmp);
printf("Available NIC models for this configuration:\n");
for (i = 0 ; i < results->len; i++) {
printf("%s\n", (char *)results->pdata[i]);
}
g_hash_table_unref(nic_model_help);
nic_model_help = NULL;
}
static void add_nic_model_help(const char *model, const char *alias)
{
GPtrArray *alias_list = NULL;
if (g_hash_table_lookup_extended(nic_model_help, model, NULL,
(gpointer *)&alias_list)) {
/* Already exists, no alias to add: return */
if (!alias) {
return;
}
if (alias_list) {
/* Check if this alias is already in the list. Add if not. */
if (!g_ptr_array_find_with_equal_func(alias_list, alias,
g_str_equal, NULL)) {
g_ptr_array_add(alias_list, g_strdup(alias));
}
return;
}
}
/* Either this model wasn't in the list already, or a first alias added */
if (alias) {
alias_list = g_ptr_array_new();
g_ptr_array_set_free_func(alias_list, g_free);
g_ptr_array_add(alias_list, g_strdup(alias));
}
g_hash_table_replace(nic_model_help, g_strdup(model), alias_list);
}
NICInfo *qemu_find_nic_info(const char *typename, bool match_default,
const char *alias)
{
NICInfo *nd;
int i;
if (nic_model_help) {
add_nic_model_help(typename, alias);
}
for (i = 0; i < nb_nics; i++) {
nd = &nd_table[i];
if (!nd->used || nd->instantiated) {
continue;
}
if ((match_default && !nd->model) || !g_strcmp0(nd->model, typename)
|| (alias && !g_strcmp0(nd->model, alias))) {
return nd;
}
}
return NULL;
}
/* "I have created a device. Please configure it if you can" */
bool qemu_configure_nic_device(DeviceState *dev, bool match_default,
const char *alias)
{
NICInfo *nd = qemu_find_nic_info(object_get_typename(OBJECT(dev)),
match_default, alias);
if (nd) {
qdev_set_nic_properties(dev, nd);
return true;
}
return false;
}
/* "Please create a device, if you have a configuration for it" */
DeviceState *qemu_create_nic_device(const char *typename, bool match_default,
const char *alias)
{
NICInfo *nd = qemu_find_nic_info(typename, match_default, alias);
DeviceState *dev;
if (!nd) {
return NULL;
}
dev = qdev_new(typename);
qdev_set_nic_properties(dev, nd);
return dev;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
void qemu_create_nic_bus_devices(BusState *bus, const char *parent_type,
const char *default_model,
const char *alias, const char *alias_target)
{
GPtrArray *nic_models = qemu_get_nic_models(parent_type);
const char *model;
DeviceState *dev;
NICInfo *nd;
int i;
if (nic_model_help) {
if (alias_target) {
add_nic_model_help(alias_target, alias);
}
for (i = 0; i < nic_models->len - 1; i++) {
add_nic_model_help(nic_models->pdata[i], NULL);
}
}
/* Drop the NULL terminator which would make g_str_equal() unhappy */
nic_models->len--;
for (i = 0; i < nb_nics; i++) {
nd = &nd_table[i];
if (!nd->used || nd->instantiated) {
continue;
}
model = nd->model ? nd->model : default_model;
if (!model) {
continue;
}
/* Each bus type is allowed *one* substitution */
if (g_str_equal(model, alias)) {
model = alias_target;
}
if (!g_ptr_array_find_with_equal_func(nic_models, model,
g_str_equal, NULL)) {
/* This NIC does not live on this bus. */
continue;
}
dev = qdev_new(model);
qdev_set_nic_properties(dev, nd);
qdev_realize_and_unref(dev, bus, &error_fatal);
}
g_ptr_array_free(nic_models, true);
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
static int (* const net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
const Netdev *netdev,
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
const char *name,
NetClientState *peer, Error **errp) = {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_NIC] = net_init_nic,
#ifdef CONFIG_SLIRP
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_USER] = net_init_slirp,
#endif
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_TAP] = net_init_tap,
[NET_CLIENT_DRIVER_SOCKET] = net_init_socket,
qapi: net: add stream and dgram netdevs Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:11 +03:00
[NET_CLIENT_DRIVER_STREAM] = net_init_stream,
[NET_CLIENT_DRIVER_DGRAM] = net_init_dgram,
#ifdef CONFIG_VDE
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_VDE] = net_init_vde,
#endif
#ifdef CONFIG_NETMAP
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_NETMAP] = net_init_netmap,
#endif
net: add initial support for AF_XDP network backend AF_XDP is a network socket family that allows communication directly with the network device driver in the kernel, bypassing most or all of the kernel networking stack. In the essence, the technology is pretty similar to netmap. But, unlike netmap, AF_XDP is Linux-native and works with any network interfaces without driver modifications. Unlike vhost-based backends (kernel, user, vdpa), AF_XDP doesn't require access to character devices or unix sockets. Only access to the network interface itself is necessary. This patch implements a network backend that communicates with the kernel by creating an AF_XDP socket. A chunk of userspace memory is shared between QEMU and the host kernel. 4 ring buffers (Tx, Rx, Fill and Completion) are placed in that memory along with a pool of memory buffers for the packet data. Data transmission is done by allocating one of the buffers, copying packet data into it and placing the pointer into Tx ring. After transmission, device will return the buffer via Completion ring. On Rx, device will take a buffer form a pre-populated Fill ring, write the packet data into it and place the buffer into Rx ring. AF_XDP network backend takes on the communication with the host kernel and the network interface and forwards packets to/from the peer device in QEMU. Usage example: -device virtio-net-pci,netdev=guest1,mac=00:16:35:AF:AA:5C -netdev af-xdp,ifname=ens6f1np1,id=guest1,mode=native,queues=1 XDP program bridges the socket with a network interface. It can be attached to the interface in 2 different modes: 1. skb - this mode should work for any interface and doesn't require driver support. With a caveat of lower performance. 2. native - this does require support from the driver and allows to bypass skb allocation in the kernel and potentially use zero-copy while getting packets in/out userspace. By default, QEMU will try to use native mode and fall back to skb. Mode can be forced via 'mode' option. To force 'copy' even in native mode, use 'force-copy=on' option. This might be useful if there is some issue with the driver. Option 'queues=N' allows to specify how many device queues should be open. Note that all the queues that are not open are still functional and can receive traffic, but it will not be delivered to QEMU. So, the number of device queues should generally match the QEMU configuration, unless the device is shared with something else and the traffic re-direction to appropriate queues is correctly configured on a device level (e.g. with ethtool -N). 'start-queue=M' option can be used to specify from which queue id QEMU should start configuring 'N' queues. It might also be necessary to use this option with certain NICs, e.g. MLX5 NICs. See the docs for examples. In a general case QEMU will need CAP_NET_ADMIN and CAP_SYS_ADMIN or CAP_BPF capabilities in order to load default XSK/XDP programs to the network interface and configure BPF maps. It is possible, however, to run with no capabilities. For that to work, an external process with enough capabilities will need to pre-load default XSK program, create AF_XDP sockets and pass their file descriptors to QEMU process on startup via 'sock-fds' option. Network backend will need to be configured with 'inhibit=on' to avoid loading of the program. QEMU will need 32 MB of locked memory (RLIMIT_MEMLOCK) per queue or CAP_IPC_LOCK. There are few performance challenges with the current network backends. First is that they do not support IO threads. This means that data path is handled by the main thread in QEMU and may slow down other work or may be slowed down by some other work. This also means that taking advantage of multi-queue is generally not possible today. Another thing is that data path is going through the device emulation code, which is not really optimized for performance. The fastest "frontend" device is virtio-net. But it's not optimized for heavy traffic either, because it expects such use-cases to be handled via some implementation of vhost (user, kernel, vdpa). In practice, we have virtio notifications and rcu lock/unlock on a per-packet basis and not very efficient accesses to the guest memory. Communication channels between backend and frontend devices do not allow passing more than one packet at a time as well. Some of these challenges can be avoided in the future by adding better batching into device emulation or by implementing vhost-af-xdp variant. There are also a few kernel limitations. AF_XDP sockets do not support any kinds of checksum or segmentation offloading. Buffers are limited to a page size (4K), i.e. MTU is limited. Multi-buffer support implementation for AF_XDP is in progress, but not ready yet. Also, transmission in all non-zero-copy modes is synchronous, i.e. done in a syscall. That doesn't allow high packet rates on virtual interfaces. However, keeping in mind all of these challenges, current implementation of the AF_XDP backend shows a decent performance while running on top of a physical NIC with zero-copy support. Test setup: 2 VMs running on 2 physical hosts connected via ConnectX6-Dx card. Network backend is configured to open the NIC directly in native mode. The driver supports zero-copy. NIC is configured to use 1 queue. Inside a VM - iperf3 for basic TCP performance testing and dpdk-testpmd for PPS testing. iperf3 result: TCP stream : 19.1 Gbps dpdk-testpmd (single queue, single CPU core, 64 B packets) results: Tx only : 3.4 Mpps Rx only : 2.0 Mpps L2 FWD Loopback : 1.5 Mpps In skb mode the same setup shows much lower performance, similar to the setup where pair of physical NICs is replaced with veth pair: iperf3 result: TCP stream : 9 Gbps dpdk-testpmd (single queue, single CPU core, 64 B packets) results: Tx only : 1.2 Mpps Rx only : 1.0 Mpps L2 FWD Loopback : 0.7 Mpps Results in skb mode or over the veth are close to results of a tap backend with vhost=on and disabled segmentation offloading bridged with a NIC. Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (docker/lcitool) Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-09-13 21:34:37 +03:00
#ifdef CONFIG_AF_XDP
[NET_CLIENT_DRIVER_AF_XDP] = net_init_af_xdp,
#endif
#ifdef CONFIG_NET_BRIDGE
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_BRIDGE] = net_init_bridge,
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
#endif
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_HUBPORT] = net_init_hubport,
#ifdef CONFIG_VHOST_NET_USER
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_VHOST_USER] = net_init_vhost_user,
#endif
#ifdef CONFIG_VHOST_NET_VDPA
[NET_CLIENT_DRIVER_VHOST_VDPA] = net_init_vhost_vdpa,
#endif
#ifdef CONFIG_L2TPV3
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_L2TPV3] = net_init_l2tpv3,
#endif
#ifdef CONFIG_VMNET
[NET_CLIENT_DRIVER_VMNET_HOST] = net_init_vmnet_host,
[NET_CLIENT_DRIVER_VMNET_SHARED] = net_init_vmnet_shared,
[NET_CLIENT_DRIVER_VMNET_BRIDGED] = net_init_vmnet_bridged,
#endif /* CONFIG_VMNET */
};
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
static int net_client_init1(const Netdev *netdev, bool is_netdev, Error **errp)
{
NetClientState *peer = NULL;
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 13:02:20 +03:00
NetClientState *nc;
if (is_netdev) {
if (netdev->type == NET_CLIENT_DRIVER_NIC ||
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
!net_client_init_fun[netdev->type]) {
net: improve error message for missing netdev backend The current message when using '-net user...' with SLIRP disabled at compile time is: qemu-system-x86_64: -net user: Parameter 'type' expects a net backend type (maybe it is not compiled into this binary) An observation is that we're using the 'netdev->type' field here which is an enum value, produced after QAPI has converted from its string form. IOW, at this point in the code, we know that the user's specified type name was a valid network backend. The only possible scenario that can make the backend init function be NULL, is if support for that backend was disabled at build time. Given this, we don't need to caveat our error message with a 'maybe' hint, we can be totally explicit. The use of QERR_INVALID_PARAMETER_VALUE doesn't really lend itself to user friendly error message text. Since this is not used to set a specific QAPI error class, we can simply stop using this pre-formatted error text and provide something better. Thus the new message is: qemu-system-x86_64: -net user: network backend 'user' is not compiled into this binary The case of passing 'hubport' for -net is also given a message reminding people they should have used -netdev/-nic instead, as this backend type is only valid for the modern syntax. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-03 13:06:12 +03:00
error_setg(errp, "network backend '%s' is not compiled into this binary",
NetClientDriver_str(netdev->type));
return -1;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
} else {
if (netdev->type == NET_CLIENT_DRIVER_NONE) {
return 0; /* nothing to do */
}
net: improve error message for missing netdev backend The current message when using '-net user...' with SLIRP disabled at compile time is: qemu-system-x86_64: -net user: Parameter 'type' expects a net backend type (maybe it is not compiled into this binary) An observation is that we're using the 'netdev->type' field here which is an enum value, produced after QAPI has converted from its string form. IOW, at this point in the code, we know that the user's specified type name was a valid network backend. The only possible scenario that can make the backend init function be NULL, is if support for that backend was disabled at build time. Given this, we don't need to caveat our error message with a 'maybe' hint, we can be totally explicit. The use of QERR_INVALID_PARAMETER_VALUE doesn't really lend itself to user friendly error message text. Since this is not used to set a specific QAPI error class, we can simply stop using this pre-formatted error text and provide something better. Thus the new message is: qemu-system-x86_64: -net user: network backend 'user' is not compiled into this binary The case of passing 'hubport' for -net is also given a message reminding people they should have used -netdev/-nic instead, as this backend type is only valid for the modern syntax. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-03 13:06:12 +03:00
if (netdev->type == NET_CLIENT_DRIVER_HUBPORT) {
error_setg(errp, "network backend '%s' is only supported with -netdev/-nic",
NetClientDriver_str(netdev->type));
return -1;
}
if (!net_client_init_fun[netdev->type]) {
error_setg(errp, "network backend '%s' is not compiled into this binary",
NetClientDriver_str(netdev->type));
return -1;
}
/* Do not add to a hub if it's a nic with a netdev= parameter. */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (netdev->type != NET_CLIENT_DRIVER_NIC ||
!netdev->u.nic.netdev) {
peer = net_hub_add_port(0, NULL, NULL);
}
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 13:02:20 +03:00
nc = qemu_find_netdev(netdev->id);
if (nc) {
error_setg(errp, "Duplicate ID '%s'", netdev->id);
return -1;
}
if (net_client_init_fun[netdev->type](netdev, netdev->id, peer, errp) < 0) {
/* FIXME drop when all init functions store an Error */
if (errp && !*errp) {
error_setg(errp, "Device '%s' could not be initialized",
NetClientDriver_str(netdev->type));
}
return -1;
}
if (is_netdev) {
nc = qemu_find_netdev(netdev->id);
assert(nc);
nc->is_netdev = true;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
return 0;
}
void show_netdevs(void)
{
int idx;
const char *available_netdevs[] = {
"socket",
qapi: net: add stream and dgram netdevs Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:11 +03:00
"stream",
"dgram",
"hubport",
"tap",
#ifdef CONFIG_SLIRP
"user",
#endif
#ifdef CONFIG_L2TPV3
"l2tpv3",
#endif
#ifdef CONFIG_VDE
"vde",
#endif
#ifdef CONFIG_NET_BRIDGE
"bridge",
#endif
#ifdef CONFIG_NETMAP
"netmap",
#endif
net: add initial support for AF_XDP network backend AF_XDP is a network socket family that allows communication directly with the network device driver in the kernel, bypassing most or all of the kernel networking stack. In the essence, the technology is pretty similar to netmap. But, unlike netmap, AF_XDP is Linux-native and works with any network interfaces without driver modifications. Unlike vhost-based backends (kernel, user, vdpa), AF_XDP doesn't require access to character devices or unix sockets. Only access to the network interface itself is necessary. This patch implements a network backend that communicates with the kernel by creating an AF_XDP socket. A chunk of userspace memory is shared between QEMU and the host kernel. 4 ring buffers (Tx, Rx, Fill and Completion) are placed in that memory along with a pool of memory buffers for the packet data. Data transmission is done by allocating one of the buffers, copying packet data into it and placing the pointer into Tx ring. After transmission, device will return the buffer via Completion ring. On Rx, device will take a buffer form a pre-populated Fill ring, write the packet data into it and place the buffer into Rx ring. AF_XDP network backend takes on the communication with the host kernel and the network interface and forwards packets to/from the peer device in QEMU. Usage example: -device virtio-net-pci,netdev=guest1,mac=00:16:35:AF:AA:5C -netdev af-xdp,ifname=ens6f1np1,id=guest1,mode=native,queues=1 XDP program bridges the socket with a network interface. It can be attached to the interface in 2 different modes: 1. skb - this mode should work for any interface and doesn't require driver support. With a caveat of lower performance. 2. native - this does require support from the driver and allows to bypass skb allocation in the kernel and potentially use zero-copy while getting packets in/out userspace. By default, QEMU will try to use native mode and fall back to skb. Mode can be forced via 'mode' option. To force 'copy' even in native mode, use 'force-copy=on' option. This might be useful if there is some issue with the driver. Option 'queues=N' allows to specify how many device queues should be open. Note that all the queues that are not open are still functional and can receive traffic, but it will not be delivered to QEMU. So, the number of device queues should generally match the QEMU configuration, unless the device is shared with something else and the traffic re-direction to appropriate queues is correctly configured on a device level (e.g. with ethtool -N). 'start-queue=M' option can be used to specify from which queue id QEMU should start configuring 'N' queues. It might also be necessary to use this option with certain NICs, e.g. MLX5 NICs. See the docs for examples. In a general case QEMU will need CAP_NET_ADMIN and CAP_SYS_ADMIN or CAP_BPF capabilities in order to load default XSK/XDP programs to the network interface and configure BPF maps. It is possible, however, to run with no capabilities. For that to work, an external process with enough capabilities will need to pre-load default XSK program, create AF_XDP sockets and pass their file descriptors to QEMU process on startup via 'sock-fds' option. Network backend will need to be configured with 'inhibit=on' to avoid loading of the program. QEMU will need 32 MB of locked memory (RLIMIT_MEMLOCK) per queue or CAP_IPC_LOCK. There are few performance challenges with the current network backends. First is that they do not support IO threads. This means that data path is handled by the main thread in QEMU and may slow down other work or may be slowed down by some other work. This also means that taking advantage of multi-queue is generally not possible today. Another thing is that data path is going through the device emulation code, which is not really optimized for performance. The fastest "frontend" device is virtio-net. But it's not optimized for heavy traffic either, because it expects such use-cases to be handled via some implementation of vhost (user, kernel, vdpa). In practice, we have virtio notifications and rcu lock/unlock on a per-packet basis and not very efficient accesses to the guest memory. Communication channels between backend and frontend devices do not allow passing more than one packet at a time as well. Some of these challenges can be avoided in the future by adding better batching into device emulation or by implementing vhost-af-xdp variant. There are also a few kernel limitations. AF_XDP sockets do not support any kinds of checksum or segmentation offloading. Buffers are limited to a page size (4K), i.e. MTU is limited. Multi-buffer support implementation for AF_XDP is in progress, but not ready yet. Also, transmission in all non-zero-copy modes is synchronous, i.e. done in a syscall. That doesn't allow high packet rates on virtual interfaces. However, keeping in mind all of these challenges, current implementation of the AF_XDP backend shows a decent performance while running on top of a physical NIC with zero-copy support. Test setup: 2 VMs running on 2 physical hosts connected via ConnectX6-Dx card. Network backend is configured to open the NIC directly in native mode. The driver supports zero-copy. NIC is configured to use 1 queue. Inside a VM - iperf3 for basic TCP performance testing and dpdk-testpmd for PPS testing. iperf3 result: TCP stream : 19.1 Gbps dpdk-testpmd (single queue, single CPU core, 64 B packets) results: Tx only : 3.4 Mpps Rx only : 2.0 Mpps L2 FWD Loopback : 1.5 Mpps In skb mode the same setup shows much lower performance, similar to the setup where pair of physical NICs is replaced with veth pair: iperf3 result: TCP stream : 9 Gbps dpdk-testpmd (single queue, single CPU core, 64 B packets) results: Tx only : 1.2 Mpps Rx only : 1.0 Mpps L2 FWD Loopback : 0.7 Mpps Results in skb mode or over the veth are close to results of a tap backend with vhost=on and disabled segmentation offloading bridged with a NIC. Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (docker/lcitool) Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-09-13 21:34:37 +03:00
#ifdef CONFIG_AF_XDP
"af-xdp",
#endif
#ifdef CONFIG_POSIX
"vhost-user",
#endif
#ifdef CONFIG_VHOST_VDPA
"vhost-vdpa",
#endif
#ifdef CONFIG_VMNET
"vmnet-host",
"vmnet-shared",
"vmnet-bridged",
#endif
};
qemu_printf("Available netdev backend types:\n");
for (idx = 0; idx < ARRAY_SIZE(available_netdevs); idx++) {
qemu_printf("%s\n", available_netdevs[idx]);
}
}
static int net_client_init(QemuOpts *opts, bool is_netdev, Error **errp)
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
{
gchar **substrings = NULL;
Netdev *object = NULL;
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
int ret = -1;
Visitor *v = opts_visitor_new(opts);
/* Parse convenience option format ipv6-net=fec0::0[/64] */
const char *ip6_net = qemu_opt_get(opts, "ipv6-net");
if (ip6_net) {
char *prefix_addr;
unsigned long prefix_len = 64; /* Default 64bit prefix length. */
substrings = g_strsplit(ip6_net, "/", 2);
if (!substrings || !substrings[0]) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "ipv6-net",
"a valid IPv6 prefix");
goto out;
}
prefix_addr = substrings[0];
/* Handle user-specified prefix length. */
if (substrings[1] &&
qemu_strtoul(substrings[1], NULL, 10, &prefix_len))
{
error_setg(errp,
"parameter 'ipv6-net' expects a number after '/'");
goto out;
}
qemu_opt_set(opts, "ipv6-prefix", prefix_addr, &error_abort);
qemu_opt_set_number(opts, "ipv6-prefixlen", prefix_len,
&error_abort);
qemu_opt_unset(opts, "ipv6-net");
}
/* Create an ID for -net if the user did not specify one */
if (!is_netdev && !qemu_opts_id(opts)) {
qemu_opts_set_id(opts, id_generate(ID_NET));
}
if (visit_type_Netdev(v, NULL, &object, errp)) {
ret = net_client_init1(object, is_netdev, errp);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
}
qapi_free_Netdev(object);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
out:
g_strfreev(substrings);
visit_free(v);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
return ret;
}
void netdev_add(QemuOpts *opts, Error **errp)
{
net_client_init(opts, true, errp);
}
net: Complete qapi-fication of netdev_add We've had all the required pieces for doing a type-safe representation of netdev_add as a flat union for quite some time now (since 0e55c381f6 in v2.7.0, released in 2016), but did not make the final switch to using it because of concern about whether a command-line regression in accepting "1" in place of 1 for integer arguments would be problematic. Back then, we did not have the deprecation cycle to allow us to make progress. But now that we have waited so long, other problems have crept in: for example, our desire to add qemu-storage-daemon is hampered by the inability to express net objects, and we are unable to introspect what we actually accept. Additionally, our round-trip through QemuOpts silently eats any argument that expands to an array, rendering dnssearch, hostfwd, and guestfwd useless through QMP: {"execute": "netdev_add", "arguments": { "id": "netdev0", "type": "user", "dnssearch": [ { "str": "8.8.8.8" }, { "str": "8.8.4.4" } ]}} So without further ado, let's turn on proper QAPI. netdev_add() was a trivial wrapper around net_client_init(), which did a few steps prior to calling net_client_init1(); with this patch, we now skip directly to net_client_init1(). In addition to fixing array parameters, the following additional differences occur: - {"execute": "netdev_add", "arguments": {"type": "help"}} no longer attempts to print help to stdout and exit. Bug fix, broken in 547203ead4 'net: List available netdevs with "-netdev help"', v2.12.0. - {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }} no longer attempts to desugar the undocumented ipv6-net magic string into the proper "ipv6-prefix" and "ipv6-prefixlen". Undocumented misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses", v2.6.0. - {'execute':'netdev_add', 'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}} {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}} Used to succeed: since our command line treats everything as strings, our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost the original typing and turned everything into a string; now that we skip the QemuOpts, the JSON input has to match the exact QAPI type. But this stricter QMP is desirable, and introspection is sufficient for any affected applications to make sure they use it correctly. In qmp_netdev_add(), we still have to create a QemuOpts object so that qmp_netdev_del() will be able to remove a hotplugged network device; but the opts->head remains empty since we now manage all parsing through the QAPI object rather than QemuOpts; a separate patch will address the abuse of QemuOpts as a witness for whether a NetClientState is a netdev. In the meantime, our argument that we are okay requires auditing all uses of option group "netdev": - qemu_netdev_opts: option group definition, empty .desc[] - CLI (CLI netdev parsing ends before monitors start, so while monitors can mess with CLI netdevs, CLI cannot mess with monitor netdevs): - main() case QEMU_OPTION_netdev: store CLI definition - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig: similar, dealing only with CLI - net_init_clients(): Pass CLI to net_client_init() - Monitor: - hmp_netdev_add(): straightforward parse into net_client_init() - qmp_netdev_add(): subject of this patch, used to add full object to option group, now just adds bare-bones id - qmp_netdev_del(), netdev_del_completion(): check the option group solely for id, as a 'is this a netdev' predicate Reported-by: Alex Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200317201711.322764-2-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message typo fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 23:17:10 +03:00
void qmp_netdev_add(Netdev *netdev, Error **errp)
{
if (!id_wellformed(netdev->id)) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "id", "an identifier");
return;
}
net_client_init1(netdev, true, errp);
}
void qmp_netdev_del(const char *id, Error **errp)
{
NetClientState *nc;
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 13:02:20 +03:00
QemuOpts *opts;
nc = qemu_find_netdev(id);
if (!nc) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", id);
return;
}
if (!nc->is_netdev) {
error_setg(errp, "Device '%s' is not a netdev", id);
return;
}
qemu_del_net_client(nc);
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 13:02:20 +03:00
/*
* Wart: we need to delete the QemuOpts associated with netdevs
* created via CLI or HMP, to avoid bogus "Duplicate ID" errors in
* HMP netdev_add.
*/
opts = qemu_opts_find(qemu_find_opts("netdev"), id);
if (opts) {
qemu_opts_del(opts);
}
}
static void netfilter_print_info(Monitor *mon, NetFilterState *nf)
{
char *str;
ObjectProperty *prop;
ObjectPropertyIterator iter;
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
Visitor *v;
/* generate info str */
object_property_iter_init(&iter, OBJECT(nf));
while ((prop = object_property_iter_next(&iter))) {
if (!strcmp(prop->name, "type")) {
continue;
}
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
v = string_output_visitor_new(false, &str);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_get(OBJECT(nf), prop->name, v, NULL);
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
visit_complete(v, &str);
visit_free(v);
monitor_printf(mon, ",%s=%s", prop->name, str);
g_free(str);
}
monitor_printf(mon, "\n");
}
void print_net_client(Monitor *mon, NetClientState *nc)
{
NetFilterState *nf;
monitor_printf(mon, "%s: index=%d,type=%s,%s\n", nc->name,
nc->queue_index,
NetClientDriver_str(nc->info->type),
nc->info_str);
if (!QTAILQ_EMPTY(&nc->filters)) {
monitor_printf(mon, "filters:\n");
}
QTAILQ_FOREACH(nf, &nc->filters, next) {
monitor_printf(mon, " - %s: type=%s",
object_get_canonical_path_component(OBJECT(nf)),
object_get_typename(OBJECT(nf)));
netfilter_print_info(mon, nf);
}
}
RxFilterInfoList *qmp_query_rx_filter(const char *name, Error **errp)
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
{
NetClientState *nc;
RxFilterInfoList *filter_list = NULL, **tail = &filter_list;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
QTAILQ_FOREACH(nc, &net_clients, next) {
RxFilterInfo *info;
if (name && strcmp(nc->name, name) != 0) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
continue;
}
/* only query rx-filter information of NIC */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type != NET_CLIENT_DRIVER_NIC) {
if (name) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
error_setg(errp, "net client(%s) isn't a NIC", name);
assert(!filter_list);
return NULL;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
continue;
}
/* only query information on queue 0 since the info is per nic,
* not per queue
*/
if (nc->queue_index != 0)
continue;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
if (nc->info->query_rx_filter) {
info = nc->info->query_rx_filter(nc);
QAPI_LIST_APPEND(tail, info);
} else if (name) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
error_setg(errp, "net client(%s) doesn't support"
" rx-filter querying", name);
assert(!filter_list);
return NULL;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
if (name) {
break;
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
if (filter_list == NULL && name) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
error_setg(errp, "invalid net client name: %s", name);
}
return filter_list;
}
void colo_notify_filters_event(int event, Error **errp)
{
NetClientState *nc;
NetFilterState *nf;
NetFilterClass *nfc = NULL;
Error *local_err = NULL;
QTAILQ_FOREACH(nc, &net_clients, next) {
QTAILQ_FOREACH(nf, &nc->filters, next) {
nfc = NETFILTER_GET_CLASS(OBJECT(nf));
nfc->handle_event(nf, event, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
}
}
}
void qmp_set_link(const char *name, bool up, Error **errp)
{
NetClientState *ncs[MAX_QUEUE_NUM];
NetClientState *nc;
int queues, i;
queues = qemu_find_net_clients_except(name, ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NET_CLIENT_DRIVER__MAX,
MAX_QUEUE_NUM);
if (queues == 0) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", name);
return;
}
nc = ncs[0];
for (i = 0; i < queues; i++) {
ncs[i]->link_down = !up;
}
if (nc->info->link_status_changed) {
nc->info->link_status_changed(nc);
}
if (nc->peer) {
/* Change peer link only if the peer is NIC and then notify peer.
* If the peer is a HUBPORT or a backend, we do not change the
* link status.
*
* This behavior is compatible with qemu hubs where there could be
* multiple clients that can still communicate with each other in
* disconnected mode. For now maintain this compatibility.
*/
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
for (i = 0; i < queues; i++) {
ncs[i]->peer->link_down = !up;
}
}
if (nc->peer->info->link_status_changed) {
nc->peer->info->link_status_changed(nc->peer);
}
}
}
static void net_vm_change_state_handler(void *opaque, bool running,
RunState state)
{
NetClientState *nc;
NetClientState *tmp;
QTAILQ_FOREACH_SAFE(nc, &net_clients, next, tmp) {
if (running) {
/* Flush queued packets and wake up backends. */
if (nc->peer && qemu_can_send_packet(nc)) {
qemu_flush_queued_packets(nc->peer);
}
} else {
/* Complete all queued packets, to guarantee we don't modify
* state later when VM is not running.
*/
qemu_flush_or_purge_queued_packets(nc, true);
}
}
}
void net_cleanup(void)
{
NetClientState *nc, **p = &QTAILQ_FIRST(&net_clients);
Add the function of colo_compare_cleanup This patch fixes the following: #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007f6ae4559859 in __GI_abort () at abort.c:79 #2 0x0000559aaa386720 in error_exit (err=16, msg=0x559aaa5973d0 <__func__.16227> "qemu_mutex_destroy") at util/qemu-thread-posix.c:36 #3 0x0000559aaa3868c5 in qemu_mutex_destroy (mutex=0x559aabffe828) at util/qemu-thread-posix.c:69 #4 0x0000559aaa2f93a8 in char_finalize (obj=0x559aabffe800) at chardev/char.c:285 #5 0x0000559aaa23318a in object_deinit (obj=0x559aabffe800, type=0x559aabfd7d20) at qom/object.c:606 #6 0x0000559aaa2331b8 in object_deinit (obj=0x559aabffe800, type=0x559aabfd9060) at qom/object.c:610 #7 0x0000559aaa233200 in object_finalize (data=0x559aabffe800) at qom/object.c:620 #8 0x0000559aaa234202 in object_unref (obj=0x559aabffe800) at qom/object.c:1074 #9 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0dac10, name=0x559aac778760 "compare0-0", opaque=0x559aabffe800) at qom/object.c:1584 #10 0x0000559aaa232f70 in object_property_del_all (obj=0x559aac0dac10) at qom/object.c:557 #11 0x0000559aaa2331ed in object_finalize (data=0x559aac0dac10) at qom/object.c:619 #12 0x0000559aaa234202 in object_unref (obj=0x559aac0dac10) at qom/object.c:1074 #13 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0c75c0, name=0x559aac0dadc0 "chardevs", opaque=0x559aac0dac10) at qom/object.c:1584 #14 0x0000559aaa233071 in object_property_del_child (obj=0x559aac0c75c0, child=0x559aac0dac10, errp=0x0) at qom/object.c:580 #15 0x0000559aaa233155 in object_unparent (obj=0x559aac0dac10) at qom/object.c:599 #16 0x0000559aaa2fb721 in qemu_chr_cleanup () at chardev/char.c:1159 #17 0x0000559aa9f9b110 in main (argc=54, argv=0x7ffeb62fa998, envp=0x7ffeb62fab50) at vl.c:4539 When chardev is cleaned up, chr_write_lock needs to be destroyed. But the colo-compare module is not cleaned up normally before it when the guest poweroff. It is holding chr_write_lock at this time. This will cause qemu crash.So we add the function of colo_compare_cleanup() before qemu_chr_cleanup() to fix the bug. Signed-off-by: Lei Rao <lei.rao@intel.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-08 11:23:30 +03:00
/*cleanup colo compare module for COLO*/
colo_compare_cleanup();
/*
* Walk the net_clients list and remove the netdevs but *not* any
* NET_CLIENT_DRIVER_NIC entries. The latter are owned by the device
* model which created them, and in some cases (e.g. xen-net-device)
* the device itself may do cleanup at exit and will be upset if we
* just delete its NIC from underneath it.
*
* Since qemu_del_net_client() may delete multiple entries, using
* QTAILQ_FOREACH_SAFE() is not safe here. The only safe pointer
* to keep as a bookmark is a NET_CLIENT_DRIVER_NIC entry, so keep
* 'p' pointing to either the head of the list, or the 'next' field
* of the latest NET_CLIENT_DRIVER_NIC, and operate on *p as we walk
* the list.
*
* The 'nc' variable isn't part of the list traversal; it's purely
* for convenience as too much '(*p)->' has a tendency to make the
* readers' eyes bleed.
*/
while (*p) {
nc = *p;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC) {
/* Skip NET_CLIENT_DRIVER_NIC entries */
p = &QTAILQ_NEXT(nc, next);
} else {
qemu_del_net_client(nc);
}
}
qemu_del_vm_change_state_handler(net_change_state_entry);
}
void net_check_clients(void)
{
NetClientState *nc;
int i;
if (nic_model_help) {
show_nic_models();
exit(0);
}
net_hub_check_clients();
QTAILQ_FOREACH(nc, &net_clients, next) {
if (!nc->peer) {
Convert multi-line fprintf() to warn_report() Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-11 22:52:53 +03:00
warn_report("%s %s has no peer",
nc->info->type == NET_CLIENT_DRIVER_NIC
? "nic" : "netdev",
nc->name);
}
}
/* Check that all NICs requested via -net nic actually got created.
* NICs created via -device don't need to be checked here because
* they are always instantiated.
*/
for (i = 0; i < MAX_NICS; i++) {
NICInfo *nd = &nd_table[i];
if (nd->used && !nd->instantiated) {
Convert multi-line fprintf() to warn_report() Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-11 22:52:53 +03:00
warn_report("requested NIC (%s, model %s) "
"was not created (not supported by this machine?)",
nd->name ? nd->name : "anonymous",
nd->model ? nd->model : "unspecified");
}
}
}
static int net_init_client(void *dummy, QemuOpts *opts, Error **errp)
{
return net_client_init(opts, false, errp);
}
static int net_init_netdev(void *dummy, QemuOpts *opts, Error **errp)
{
const char *type = qemu_opt_get(opts, "type");
if (type && is_help_option(type)) {
show_netdevs();
exit(0);
}
return net_client_init(opts, true, errp);
}
/* For the convenience "--nic" parameter */
static int net_param_nic(void *dummy, QemuOpts *opts, Error **errp)
{
char *mac, *nd_id;
int idx, ret;
NICInfo *ni;
const char *type;
type = qemu_opt_get(opts, "type");
if (type) {
if (g_str_equal(type, "none")) {
return 0; /* Nothing to do, default_net is cleared in vl.c */
}
if (is_help_option(type)) {
GPtrArray *nic_models = qemu_get_nic_models(TYPE_DEVICE);
show_netdevs();
printf("\n");
qemu_show_nic_models(type, (const char **)nic_models->pdata);
g_ptr_array_free(nic_models, true);
exit(0);
}
}
idx = nic_get_free_idx();
if (idx == -1 || nb_nics >= MAX_NICS) {
error_setg(errp, "no more on-board/default NIC slots available");
return -1;
}
if (!type) {
qemu_opt_set(opts, "type", "user", &error_abort);
}
ni = &nd_table[idx];
memset(ni, 0, sizeof(*ni));
ni->model = qemu_opt_get_del(opts, "model");
if (!nic_model_help && !g_strcmp0(ni->model, "help")) {
nic_model_help = g_hash_table_new_full(g_str_hash, g_str_equal,
g_free, NULL);
return 0;
}
/* Create an ID if the user did not specify one */
nd_id = g_strdup(qemu_opts_id(opts));
if (!nd_id) {
nd_id = id_generate(ID_NET);
qemu_opts_set_id(opts, nd_id);
}
/* Handle MAC address */
mac = qemu_opt_get_del(opts, "mac");
if (mac) {
ret = net_parse_macaddr(ni->macaddr.a, mac);
g_free(mac);
if (ret) {
error_setg(errp, "invalid syntax for ethernet address");
goto out;
}
if (is_multicast_ether_addr(ni->macaddr.a)) {
error_setg(errp, "NIC cannot have multicast MAC address");
ret = -1;
goto out;
}
}
qemu_macaddr_default_if_unset(&ni->macaddr);
ret = net_client_init(opts, true, errp);
if (ret == 0) {
ni->netdev = qemu_find_netdev(nd_id);
ni->used = true;
nb_nics++;
}
out:
g_free(nd_id);
return ret;
}
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
static void netdev_init_modern(void)
{
while (!QSIMPLEQ_EMPTY(&nd_queue)) {
NetdevQueueEntry *nd = QSIMPLEQ_FIRST(&nd_queue);
QSIMPLEQ_REMOVE_HEAD(&nd_queue, entry);
loc_push_restore(&nd->loc);
net_client_init1(nd->nd, true, &error_fatal);
loc_pop(&nd->loc);
qapi_free_Netdev(nd->nd);
g_free(nd);
}
}
void net_init_clients(void)
{
net_change_state_entry =
qemu_add_vm_change_state_handler(net_vm_change_state_handler, NULL);
QTAILQ_INIT(&net_clients);
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
netdev_init_modern();
qemu_opts_foreach(qemu_find_opts("netdev"), net_init_netdev, NULL,
&error_fatal);
qemu_opts_foreach(qemu_find_opts("nic"), net_param_nic, NULL,
&error_fatal);
qemu_opts_foreach(qemu_find_opts("net"), net_init_client, NULL,
&error_fatal);
}
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
/*
* Does this -netdev argument use modern rather than traditional syntax?
* Modern syntax is to be parsed with netdev_parse_modern().
* Traditional syntax is to be parsed with net_client_parse().
*/
bool netdev_is_modern(const char *optstr)
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
{
qapi: net: add stream and dgram netdevs Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:11 +03:00
QemuOpts *opts;
bool is_modern;
const char *type;
static QemuOptsList dummy_opts = {
.name = "netdev",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(dummy_opts.head),
.desc = { { } },
};
if (optstr[0] == '{') {
qapi: net: add stream and dgram netdevs Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:11 +03:00
/* This is JSON, which means it's modern syntax */
return true;
}
opts = qemu_opts_create(&dummy_opts, NULL, false, &error_abort);
qemu_opts_do_parse(opts, optstr, dummy_opts.implied_opt_name,
qapi: net: add stream and dgram netdevs Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:11 +03:00
&error_abort);
type = qemu_opt_get(opts, "type");
is_modern = !g_strcmp0(type, "stream") || !g_strcmp0(type, "dgram");
qemu_opts_reset(&dummy_opts);
return is_modern;
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
}
/*
* netdev_parse_modern() uses modern, more expressive syntax than
* net_client_parse(), but supports only the -netdev option.
* netdev_parse_modern() appends to @nd_queue, whereas net_client_parse()
* appends to @qemu_netdev_opts.
*/
void netdev_parse_modern(const char *optstr)
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
{
Visitor *v;
NetdevQueueEntry *nd;
v = qobject_input_visitor_new_str(optstr, "type", &error_fatal);
qapi: net: introduce a way to bypass qemu_opts_parse_noisily() As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field of Netdev structure can collides with "type" field of SocketAddress), we introduce a way to bypass qemu_opts_parse_noisily() and use directly visit_type_Netdev() to parse the backend parameters. More details from Markus: qemu_init() passes the argument of -netdev, -nic, and -net to net_client_parse(). net_client_parse() parses with qemu_opts_parse_noisily(), passing QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and qemu_net_opts for -net. Their desc[] are all empty, which means any keys are accepted. The result of the parse (a QemuOpts) is stored in the QemuOptsList. Note that QemuOpts is flat by design. In some places, we layer non-flat on top using dotted keys convention, but not here. net_init_clients() iterates over the stored QemuOpts, and passes them to net_init_netdev(), net_param_nic(), or net_init_client(), respectively. These functions pass the QemuOpts to net_client_init(). They also do other things with the QemuOpts, which we can ignore here. net_client_init() uses the opts visitor to convert the (flat) QemOpts to a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP command netdev_add. The opts visitor was an early attempt to support QAPI in (QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see commit eb7ee2cbeb "qapi: introduce OptsVisitor". A more modern way to support QAPI is qobject_input_visitor_new_str(). It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and it also supports JSON syntax. The former isn't quite as expressive as JSON, but it's a lot closer than QemuOpts + opts visitor. This commit paves the way to use of the modern way instead. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:09 +03:00
nd = g_new(NetdevQueueEntry, 1);
visit_type_Netdev(v, NULL, &nd->nd, &error_fatal);
visit_free(v);
loc_save(&nd->loc);
QSIMPLEQ_INSERT_TAIL(&nd_queue, nd, entry);
}
void net_client_parse(QemuOptsList *opts_list, const char *optstr)
{
if (!qemu_opts_parse_noisily(opts_list, optstr, true)) {
exit(1);
}
}
/* From FreeBSD */
/* XXX: optimize */
uint32_t net_crc32(const uint8_t *p, int len)
{
uint32_t crc;
int carry, i, j;
uint8_t b;
crc = 0xffffffff;
for (i = 0; i < len; i++) {
b = *p++;
for (j = 0; j < 8; j++) {
carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
crc <<= 1;
b >>= 1;
if (carry) {
crc = ((crc ^ POLYNOMIAL_BE) | carry);
}
}
}
return crc;
}
uint32_t net_crc32_le(const uint8_t *p, int len)
{
uint32_t crc;
int carry, i, j;
uint8_t b;
crc = 0xffffffff;
for (i = 0; i < len; i++) {
b = *p++;
for (j = 0; j < 8; j++) {
carry = (crc & 0x1) ^ (b & 0x01);
crc >>= 1;
b >>= 1;
if (carry) {
crc ^= POLYNOMIAL_LE;
}
}
}
return crc;
}
QemuOptsList qemu_netdev_opts = {
.name = "netdev",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_netdev_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
QemuOptsList qemu_nic_opts = {
.name = "nic",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_nic_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
QemuOptsList qemu_net_opts = {
.name = "net",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_net_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
void net_socket_rs_init(SocketReadState *rs,
SocketReadStateFinalize *finalize,
bool vnet_hdr)
{
rs->state = 0;
rs->vnet_hdr = vnet_hdr;
rs->index = 0;
rs->packet_len = 0;
rs->vnet_hdr_len = 0;
memset(rs->buf, 0, sizeof(rs->buf));
rs->finalize = finalize;
}
/*
* Returns
* 0: success
* -1: error occurs
*/
int net_fill_rstate(SocketReadState *rs, const uint8_t *buf, int size)
{
unsigned int l;
while (size > 0) {
/* Reassemble a packet from the network.
* 0 = getting length.
* 1 = getting vnet header length.
* 2 = getting data.
*/
switch (rs->state) {
case 0:
l = 4 - rs->index;
if (l > size) {
l = size;
}
memcpy(rs->buf + rs->index, buf, l);
buf += l;
size -= l;
rs->index += l;
if (rs->index == 4) {
/* got length */
rs->packet_len = ntohl(*(uint32_t *)rs->buf);
rs->index = 0;
if (rs->vnet_hdr) {
rs->state = 1;
} else {
rs->state = 2;
rs->vnet_hdr_len = 0;
}
}
break;
case 1:
l = 4 - rs->index;
if (l > size) {
l = size;
}
memcpy(rs->buf + rs->index, buf, l);
buf += l;
size -= l;
rs->index += l;
if (rs->index == 4) {
/* got vnet header length */
rs->vnet_hdr_len = ntohl(*(uint32_t *)rs->buf);
rs->index = 0;
rs->state = 2;
}
break;
case 2:
l = rs->packet_len - rs->index;
if (l > size) {
l = size;
}
if (rs->index + l <= sizeof(rs->buf)) {
memcpy(rs->buf + rs->index, buf, l);
} else {
fprintf(stderr, "serious error: oversized packet received,"
"connection terminated.\n");
rs->index = rs->state = 0;
return -1;
}
rs->index += l;
buf += l;
size -= l;
if (rs->index >= rs->packet_len) {
rs->index = 0;
rs->state = 0;
assert(rs->finalize);
rs->finalize(rs);
}
break;
}
}
assert(size == 0);
return 0;
}