qemu/hw/timer/stellaris-gptm.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

333 lines
9.0 KiB
C
Raw Normal View History

/*
* Luminary Micro Stellaris General Purpose Timer Module
*
* Copyright (c) 2006 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GPL.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/timer.h"
#include "qapi/error.h"
#include "migration/vmstate.h"
#include "hw/qdev-clock.h"
#include "hw/timer/stellaris-gptm.h"
static void gptm_update_irq(gptm_state *s)
{
int level;
level = (s->state & s->mask) != 0;
qemu_set_irq(s->irq, level);
}
static void gptm_stop(gptm_state *s, int n)
{
timer_del(s->timer[n]);
}
static void gptm_reload(gptm_state *s, int n, int reset)
{
int64_t tick;
if (reset) {
tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
} else {
tick = s->tick[n];
}
if (s->config == 0) {
/* 32-bit CountDown. */
uint32_t count;
count = s->load[0] | (s->load[1] << 16);
tick += clock_ticks_to_ns(s->clk, count);
} else if (s->config == 1) {
/* 32-bit RTC. 1Hz tick. */
tick += NANOSECONDS_PER_SECOND;
} else if (s->mode[n] == 0xa) {
/* PWM mode. Not implemented. */
} else {
qemu_log_mask(LOG_UNIMP,
"GPTM: 16-bit timer mode unimplemented: 0x%x\n",
s->mode[n]);
return;
}
s->tick[n] = tick;
timer_mod(s->timer[n], tick);
}
static void gptm_tick(void *opaque)
{
gptm_state **p = (gptm_state **)opaque;
gptm_state *s;
int n;
s = *p;
n = p - s->opaque;
if (s->config == 0) {
s->state |= 1;
if ((s->control & 0x20)) {
/* Output trigger. */
qemu_irq_pulse(s->trigger);
}
if (s->mode[0] & 1) {
/* One-shot. */
s->control &= ~1;
} else {
/* Periodic. */
gptm_reload(s, 0, 0);
}
} else if (s->config == 1) {
/* RTC. */
uint32_t match;
s->rtc++;
match = s->match[0] | (s->match[1] << 16);
if (s->rtc > match)
s->rtc = 0;
if (s->rtc == 0) {
s->state |= 8;
}
gptm_reload(s, 0, 0);
} else if (s->mode[n] == 0xa) {
/* PWM mode. Not implemented. */
} else {
qemu_log_mask(LOG_UNIMP,
"GPTM: 16-bit timer mode unimplemented: 0x%x\n",
s->mode[n]);
}
gptm_update_irq(s);
}
static uint64_t gptm_read(void *opaque, hwaddr offset,
unsigned size)
{
gptm_state *s = (gptm_state *)opaque;
switch (offset) {
case 0x00: /* CFG */
return s->config;
case 0x04: /* TAMR */
return s->mode[0];
case 0x08: /* TBMR */
return s->mode[1];
case 0x0c: /* CTL */
return s->control;
case 0x18: /* IMR */
return s->mask;
case 0x1c: /* RIS */
return s->state;
case 0x20: /* MIS */
return s->state & s->mask;
case 0x24: /* CR */
return 0;
case 0x28: /* TAILR */
return s->load[0] | ((s->config < 4) ? (s->load[1] << 16) : 0);
case 0x2c: /* TBILR */
return s->load[1];
case 0x30: /* TAMARCHR */
return s->match[0] | ((s->config < 4) ? (s->match[1] << 16) : 0);
case 0x34: /* TBMATCHR */
return s->match[1];
case 0x38: /* TAPR */
return s->prescale[0];
case 0x3c: /* TBPR */
return s->prescale[1];
case 0x40: /* TAPMR */
return s->match_prescale[0];
case 0x44: /* TBPMR */
return s->match_prescale[1];
case 0x48: /* TAR */
if (s->config == 1) {
return s->rtc;
}
qemu_log_mask(LOG_UNIMP,
"GPTM: read of TAR but timer read not supported\n");
return 0;
case 0x4c: /* TBR */
qemu_log_mask(LOG_UNIMP,
"GPTM: read of TBR but timer read not supported\n");
return 0;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"GPTM: read at bad offset 0x02%" HWADDR_PRIx "\n",
offset);
return 0;
}
}
static void gptm_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
gptm_state *s = (gptm_state *)opaque;
uint32_t oldval;
/*
* The timers should be disabled before changing the configuration.
* We take advantage of this and defer everything until the timer
* is enabled.
*/
switch (offset) {
case 0x00: /* CFG */
s->config = value;
break;
case 0x04: /* TAMR */
s->mode[0] = value;
break;
case 0x08: /* TBMR */
s->mode[1] = value;
break;
case 0x0c: /* CTL */
oldval = s->control;
s->control = value;
/* TODO: Implement pause. */
if ((oldval ^ value) & 1) {
if (value & 1) {
gptm_reload(s, 0, 1);
} else {
gptm_stop(s, 0);
}
}
if (((oldval ^ value) & 0x100) && s->config >= 4) {
if (value & 0x100) {
gptm_reload(s, 1, 1);
} else {
gptm_stop(s, 1);
}
}
break;
case 0x18: /* IMR */
s->mask = value & 0x77;
gptm_update_irq(s);
break;
case 0x24: /* CR */
s->state &= ~value;
break;
case 0x28: /* TAILR */
s->load[0] = value & 0xffff;
if (s->config < 4) {
s->load[1] = value >> 16;
}
break;
case 0x2c: /* TBILR */
s->load[1] = value & 0xffff;
break;
case 0x30: /* TAMARCHR */
s->match[0] = value & 0xffff;
if (s->config < 4) {
s->match[1] = value >> 16;
}
break;
case 0x34: /* TBMATCHR */
s->match[1] = value >> 16;
break;
case 0x38: /* TAPR */
s->prescale[0] = value;
break;
case 0x3c: /* TBPR */
s->prescale[1] = value;
break;
case 0x40: /* TAPMR */
s->match_prescale[0] = value;
break;
case 0x44: /* TBPMR */
s->match_prescale[0] = value;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"GPTM: write at bad offset 0x02%" HWADDR_PRIx "\n",
offset);
}
gptm_update_irq(s);
}
static const MemoryRegionOps gptm_ops = {
.read = gptm_read,
.write = gptm_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static const VMStateDescription vmstate_stellaris_gptm = {
.name = "stellaris_gptm",
.version_id = 2,
.minimum_version_id = 2,
.fields = (VMStateField[]) {
VMSTATE_UINT32(config, gptm_state),
VMSTATE_UINT32_ARRAY(mode, gptm_state, 2),
VMSTATE_UINT32(control, gptm_state),
VMSTATE_UINT32(state, gptm_state),
VMSTATE_UINT32(mask, gptm_state),
VMSTATE_UNUSED(8),
VMSTATE_UINT32_ARRAY(load, gptm_state, 2),
VMSTATE_UINT32_ARRAY(match, gptm_state, 2),
VMSTATE_UINT32_ARRAY(prescale, gptm_state, 2),
VMSTATE_UINT32_ARRAY(match_prescale, gptm_state, 2),
VMSTATE_UINT32(rtc, gptm_state),
VMSTATE_INT64_ARRAY(tick, gptm_state, 2),
VMSTATE_TIMER_PTR_ARRAY(timer, gptm_state, 2),
VMSTATE_CLOCK(clk, gptm_state),
VMSTATE_END_OF_LIST()
}
};
static void stellaris_gptm_init(Object *obj)
{
DeviceState *dev = DEVICE(obj);
gptm_state *s = STELLARIS_GPTM(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
sysbus_init_irq(sbd, &s->irq);
qdev_init_gpio_out(dev, &s->trigger, 1);
memory_region_init_io(&s->iomem, obj, &gptm_ops, s,
"gptm", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
s->opaque[0] = s->opaque[1] = s;
/*
* TODO: in an ideal world we would model the effects of changing
* the input clock frequency while the countdown timer is active.
* The best way to do this would be to convert the device to use
* ptimer instead of hand-rolling its own timer. This would also
* make it easy to implement reading the current count from the
* TAR and TBR registers.
*/
s->clk = qdev_init_clock_in(dev, "clk", NULL, NULL, 0);
}
static void stellaris_gptm_realize(DeviceState *dev, Error **errp)
{
gptm_state *s = STELLARIS_GPTM(dev);
if (!clock_has_source(s->clk)) {
error_setg(errp, "stellaris-gptm: clk must be connected");
return;
}
s->timer[0] = timer_new_ns(QEMU_CLOCK_VIRTUAL, gptm_tick, &s->opaque[0]);
s->timer[1] = timer_new_ns(QEMU_CLOCK_VIRTUAL, gptm_tick, &s->opaque[1]);
}
static void stellaris_gptm_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->vmsd = &vmstate_stellaris_gptm;
dc->realize = stellaris_gptm_realize;
}
static const TypeInfo stellaris_gptm_info = {
.name = TYPE_STELLARIS_GPTM,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(gptm_state),
.instance_init = stellaris_gptm_init,
.class_init = stellaris_gptm_class_init,
};
static void stellaris_gptm_register_types(void)
{
type_register_static(&stellaris_gptm_info);
}
type_init(stellaris_gptm_register_types)