qemu/net/vhost-user.c

400 lines
11 KiB
C
Raw Normal View History

/*
* vhost-user.c
*
* Copyright (c) 2013 Virtual Open Systems Sarl.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "clients.h"
#include "net/vhost_net.h"
#include "net/vhost-user.h"
#include "chardev/char-fe.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-net.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
#include "trace.h"
typedef struct NetVhostUserState {
NetClientState nc;
CharBackend chr; /* only queue index 0 */
VHostNetState *vhost_net;
guint watch;
uint64_t acked_features;
bool started;
} NetVhostUserState;
VHostNetState *vhost_user_get_vhost_net(NetClientState *nc)
{
NetVhostUserState *s = DO_UPCAST(NetVhostUserState, nc, nc);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_USER);
return s->vhost_net;
}
uint64_t vhost_user_get_acked_features(NetClientState *nc)
{
NetVhostUserState *s = DO_UPCAST(NetVhostUserState, nc, nc);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_USER);
return s->acked_features;
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
static void vhost_user_stop(int queues, NetClientState *ncs[])
{
NetVhostUserState *s;
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
int i;
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
for (i = 0; i < queues; i++) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(ncs[i]->info->type == NET_CLIENT_DRIVER_VHOST_USER);
s = DO_UPCAST(NetVhostUserState, nc, ncs[i]);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
if (s->vhost_net) {
/* save acked features */
uint64_t features = vhost_net_get_acked_features(s->vhost_net);
if (features) {
s->acked_features = features;
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
vhost_net_cleanup(s->vhost_net);
}
}
}
static int vhost_user_start(int queues, NetClientState *ncs[], CharBackend *be)
{
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
VhostNetOptions options;
struct vhost_net *net = NULL;
NetVhostUserState *s;
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
int max_queues;
int i;
options.backend_type = VHOST_BACKEND_TYPE_USER;
for (i = 0; i < queues; i++) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(ncs[i]->info->type == NET_CLIENT_DRIVER_VHOST_USER);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
s = DO_UPCAST(NetVhostUserState, nc, ncs[i]);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
options.net_backend = ncs[i];
options.opaque = be;
options.busyloop_timeout = 0;
net = vhost_net_init(&options);
if (!net) {
error_report("failed to init vhost_net for queue %d", i);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
goto err;
}
if (i == 0) {
max_queues = vhost_net_get_max_queues(net);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
if (queues > max_queues) {
error_report("you are asking more queues than supported: %d",
max_queues);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
goto err;
}
}
if (s->vhost_net) {
vhost_net_cleanup(s->vhost_net);
g_free(s->vhost_net);
}
s->vhost_net = net;
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
return 0;
err:
if (net) {
vhost_net_cleanup(net);
g_free(net);
}
vhost_user_stop(i, ncs);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
return -1;
}
static ssize_t vhost_user_receive(NetClientState *nc, const uint8_t *buf,
size_t size)
{
/* In case of RARP (message size is 60) notify backup to send a fake RARP.
This fake RARP will be sent by backend only for guest
without GUEST_ANNOUNCE capability.
*/
if (size == 60) {
NetVhostUserState *s = DO_UPCAST(NetVhostUserState, nc, nc);
int r;
static int display_rarp_failure = 1;
char mac_addr[6];
/* extract guest mac address from the RARP message */
memcpy(mac_addr, &buf[6], 6);
r = vhost_net_notify_migration_done(s->vhost_net, mac_addr);
if ((r != 0) && (display_rarp_failure)) {
fprintf(stderr,
"Vhost user backend fails to broadcast fake RARP\n");
fflush(stderr);
display_rarp_failure = 0;
}
}
return size;
}
static void vhost_user_cleanup(NetClientState *nc)
{
NetVhostUserState *s = DO_UPCAST(NetVhostUserState, nc, nc);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
if (s->vhost_net) {
vhost_net_cleanup(s->vhost_net);
g_free(s->vhost_net);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
s->vhost_net = NULL;
}
if (nc->queue_index == 0) {
if (s->watch) {
g_source_remove(s->watch);
s->watch = 0;
}
qemu_chr_fe_deinit(&s->chr, true);
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
qemu_purge_queued_packets(nc);
}
static bool vhost_user_has_vnet_hdr(NetClientState *nc)
{
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_USER);
return true;
}
static bool vhost_user_has_ufo(NetClientState *nc)
{
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_USER);
return true;
}
static NetClientInfo net_vhost_user_info = {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
.type = NET_CLIENT_DRIVER_VHOST_USER,
.size = sizeof(NetVhostUserState),
.receive = vhost_user_receive,
.cleanup = vhost_user_cleanup,
.has_vnet_hdr = vhost_user_has_vnet_hdr,
.has_ufo = vhost_user_has_ufo,
};
static gboolean net_vhost_user_watch(GIOChannel *chan, GIOCondition cond,
void *opaque)
{
NetVhostUserState *s = opaque;
qemu_chr_fe_disconnect(&s->chr);
return TRUE;
}
static void net_vhost_user_event(void *opaque, int event);
static void chr_closed_bh(void *opaque)
{
const char *name = opaque;
NetClientState *ncs[MAX_QUEUE_NUM];
NetVhostUserState *s;
Error *err = NULL;
int queues;
queues = qemu_find_net_clients_except(name, ncs,
NET_CLIENT_DRIVER_NIC,
MAX_QUEUE_NUM);
assert(queues < MAX_QUEUE_NUM);
s = DO_UPCAST(NetVhostUserState, nc, ncs[0]);
qmp_set_link(name, false, &err);
vhost_user_stop(queues, ncs);
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL, net_vhost_user_event,
NULL, opaque, NULL, true);
if (err) {
error_report_err(err);
}
}
static void net_vhost_user_event(void *opaque, int event)
{
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
const char *name = opaque;
NetClientState *ncs[MAX_QUEUE_NUM];
NetVhostUserState *s;
Chardev *chr;
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
Error *err = NULL;
int queues;
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
queues = qemu_find_net_clients_except(name, ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NET_CLIENT_DRIVER_NIC,
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
MAX_QUEUE_NUM);
vhost-user: fix use after free "name" is freed after visiting options, instead use the first NetClientState name. Adds a few assert() for clarifying and checking some impossible states. READ of size 1 at 0x602000000990 thread T0 #0 0x7f6b251c570c (/lib64/libasan.so.2+0x4770c) #1 0x5566dc380600 in qemu_find_net_clients_except net/net.c:824 #2 0x5566dc39bac7 in net_vhost_user_event net/vhost-user.c:193 #3 0x5566dbee862a in qemu_chr_be_event /home/elmarco/src/qemu/qemu-char.c:201 #4 0x5566dbef2890 in tcp_chr_disconnect /home/elmarco/src/qemu/qemu-char.c:2790 #5 0x5566dbef2d0b in tcp_chr_sync_read /home/elmarco/src/qemu/qemu-char.c:2835 #6 0x5566dbee8a99 in qemu_chr_fe_read_all /home/elmarco/src/qemu/qemu-char.c:295 #7 0x5566dc39b964 in net_vhost_user_watch net/vhost-user.c:180 #8 0x5566dc5a06c7 in qio_channel_fd_source_dispatch io/channel-watch.c:70 #9 0x7f6b1aa2ab87 in g_main_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3154 #10 0x7f6b1aa2b9cb in g_main_context_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3769 #11 0x5566dc475ed4 in glib_pollfds_poll /home/elmarco/src/qemu/main-loop.c:212 #12 0x5566dc476029 in os_host_main_loop_wait /home/elmarco/src/qemu/main-loop.c:257 #13 0x5566dc476165 in main_loop_wait /home/elmarco/src/qemu/main-loop.c:505 #14 0x5566dbf08d31 in main_loop /home/elmarco/src/qemu/vl.c:1932 #15 0x5566dbf16783 in main /home/elmarco/src/qemu/vl.c:4646 #16 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f) #17 0x5566dbbf5348 in _start (/home/elmarco/src/qemu/x86_64-softmmu/qemu-system-x86_64+0x3f9348) 0x602000000990 is located 0 bytes inside of 5-byte region [0x602000000990,0x602000000995) freed by thread T0 here: #0 0x7f6b2521666a in __interceptor_free (/lib64/libasan.so.2+0x9866a) #1 0x7f6b1aa332a4 in g_free /home/elmarco/src/gnome/glib/glib/gmem.c:189 #2 0x5566dc5f416f in qapi_dealloc_type_str qapi/qapi-dealloc-visitor.c:134 #3 0x5566dc5f3268 in visit_type_str qapi/qapi-visit-core.c:196 #4 0x5566dc5ced58 in visit_type_Netdev_fields /home/elmarco/src/qemu/qapi-visit.c:5936 #5 0x5566dc5cef71 in visit_type_Netdev /home/elmarco/src/qemu/qapi-visit.c:5960 #6 0x5566dc381a8d in net_visit net/net.c:1049 #7 0x5566dc381c37 in net_client_init net/net.c:1076 #8 0x5566dc3839e2 in net_init_netdev net/net.c:1473 #9 0x5566dc63cc0a in qemu_opts_foreach util/qemu-option.c:1112 #10 0x5566dc383b36 in net_init_clients net/net.c:1499 #11 0x5566dbf15d86 in main /home/elmarco/src/qemu/vl.c:4397 #12 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23 21:10:49 +03:00
assert(queues < MAX_QUEUE_NUM);
s = DO_UPCAST(NetVhostUserState, nc, ncs[0]);
chr = qemu_chr_fe_get_driver(&s->chr);
trace_vhost_user_event(chr->label, event);
switch (event) {
case CHR_EVENT_OPENED:
if (vhost_user_start(queues, ncs, &s->chr) < 0) {
qemu_chr_fe_disconnect(&s->chr);
return;
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
}
s->watch = qemu_chr_fe_add_watch(&s->chr, G_IO_HUP,
net_vhost_user_watch, s);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
qmp_set_link(name, true, &err);
s->started = true;
break;
case CHR_EVENT_CLOSED:
/* a close event may happen during a read/write, but vhost
* code assumes the vhost_dev remains setup, so delay the
* stop & clear to idle.
* FIXME: better handle failure in vhost code, remove bh
*/
if (s->watch) {
AioContext *ctx = qemu_get_current_aio_context();
g_source_remove(s->watch);
s->watch = 0;
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL, NULL, NULL,
NULL, NULL, false);
aio_bh_schedule_oneshot(ctx, chr_closed_bh, opaque);
}
break;
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
if (err) {
error_report_err(err);
}
}
static int net_vhost_user_init(NetClientState *peer, const char *device,
const char *name, Chardev *chr,
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
int queues)
{
Error *err = NULL;
NetClientState *nc, *nc0 = NULL;
NetVhostUserState *s;
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
int i;
vhost-user: fix use after free "name" is freed after visiting options, instead use the first NetClientState name. Adds a few assert() for clarifying and checking some impossible states. READ of size 1 at 0x602000000990 thread T0 #0 0x7f6b251c570c (/lib64/libasan.so.2+0x4770c) #1 0x5566dc380600 in qemu_find_net_clients_except net/net.c:824 #2 0x5566dc39bac7 in net_vhost_user_event net/vhost-user.c:193 #3 0x5566dbee862a in qemu_chr_be_event /home/elmarco/src/qemu/qemu-char.c:201 #4 0x5566dbef2890 in tcp_chr_disconnect /home/elmarco/src/qemu/qemu-char.c:2790 #5 0x5566dbef2d0b in tcp_chr_sync_read /home/elmarco/src/qemu/qemu-char.c:2835 #6 0x5566dbee8a99 in qemu_chr_fe_read_all /home/elmarco/src/qemu/qemu-char.c:295 #7 0x5566dc39b964 in net_vhost_user_watch net/vhost-user.c:180 #8 0x5566dc5a06c7 in qio_channel_fd_source_dispatch io/channel-watch.c:70 #9 0x7f6b1aa2ab87 in g_main_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3154 #10 0x7f6b1aa2b9cb in g_main_context_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3769 #11 0x5566dc475ed4 in glib_pollfds_poll /home/elmarco/src/qemu/main-loop.c:212 #12 0x5566dc476029 in os_host_main_loop_wait /home/elmarco/src/qemu/main-loop.c:257 #13 0x5566dc476165 in main_loop_wait /home/elmarco/src/qemu/main-loop.c:505 #14 0x5566dbf08d31 in main_loop /home/elmarco/src/qemu/vl.c:1932 #15 0x5566dbf16783 in main /home/elmarco/src/qemu/vl.c:4646 #16 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f) #17 0x5566dbbf5348 in _start (/home/elmarco/src/qemu/x86_64-softmmu/qemu-system-x86_64+0x3f9348) 0x602000000990 is located 0 bytes inside of 5-byte region [0x602000000990,0x602000000995) freed by thread T0 here: #0 0x7f6b2521666a in __interceptor_free (/lib64/libasan.so.2+0x9866a) #1 0x7f6b1aa332a4 in g_free /home/elmarco/src/gnome/glib/glib/gmem.c:189 #2 0x5566dc5f416f in qapi_dealloc_type_str qapi/qapi-dealloc-visitor.c:134 #3 0x5566dc5f3268 in visit_type_str qapi/qapi-visit-core.c:196 #4 0x5566dc5ced58 in visit_type_Netdev_fields /home/elmarco/src/qemu/qapi-visit.c:5936 #5 0x5566dc5cef71 in visit_type_Netdev /home/elmarco/src/qemu/qapi-visit.c:5960 #6 0x5566dc381a8d in net_visit net/net.c:1049 #7 0x5566dc381c37 in net_client_init net/net.c:1076 #8 0x5566dc3839e2 in net_init_netdev net/net.c:1473 #9 0x5566dc63cc0a in qemu_opts_foreach util/qemu-option.c:1112 #10 0x5566dc383b36 in net_init_clients net/net.c:1499 #11 0x5566dbf15d86 in main /home/elmarco/src/qemu/vl.c:4397 #12 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23 21:10:49 +03:00
assert(name);
assert(queues > 0);
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
for (i = 0; i < queues; i++) {
nc = qemu_new_net_client(&net_vhost_user_info, peer, device, name);
snprintf(nc->info_str, sizeof(nc->info_str), "vhost-user%d to %s",
i, chr->label);
nc->queue_index = i;
if (!nc0) {
nc0 = nc;
s = DO_UPCAST(NetVhostUserState, nc, nc);
if (!qemu_chr_fe_init(&s->chr, chr, &err)) {
error_report_err(err);
return -1;
}
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
}
s = DO_UPCAST(NetVhostUserState, nc, nc0);
do {
if (qemu_chr_fe_wait_connected(&s->chr, &err) < 0) {
error_report_err(err);
return -1;
}
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL,
net_vhost_user_event, NULL, nc0->name, NULL,
true);
} while (!s->started);
assert(s->vhost_net);
return 0;
}
static Chardev *net_vhost_claim_chardev(
const NetdevVhostUserOptions *opts, Error **errp)
{
Chardev *chr = qemu_chr_find(opts->chardev);
if (chr == NULL) {
error_setg(errp, "chardev \"%s\" not found", opts->chardev);
return NULL;
}
net: don't poke at chardev internal QemuOpts The vhost-user & colo code is poking at the QemuOpts instance in the CharDriverState struct, not realizing that it is valid for this to be NULL. e.g. the following crash shows a codepath where it will be NULL: Program terminated with signal SIGSEGV, Segmentation fault. #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 617 QTAILQ_FOREACH(opt, &opts->head, next) { [Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))] (gdb) bt #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 #1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314 #2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360 #3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051 #4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108 #5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186 #6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205 #7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978 #8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105 #9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319 #10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369 #11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124 #12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994 #13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387 #14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399 #15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927 #16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84 #17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213 #19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258 #20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506 #21 0x000055baf676587b in main_loop () at vl.c:1908 #22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604 (gdb) p opts $1 = (QemuOpts *) 0x0 The crash occurred when attaching vhost-user net via QMP: { "execute": "chardev-add", "arguments": { "id": "charnet2", "backend": { "type": "socket", "data": { "addr": { "type": "unix", "data": { "path": "/var/run/openvswitch/vhost-user1" } }, "wait": false, "server": false } } }, "id": "libvirt-19" } { "return": { }, "id": "libvirt-19" } { "execute": "netdev_add", "arguments": { "type": "vhost-user", "chardev": "charnet2", "id": "hostnet2" }, "id": "libvirt-20" } Code using chardevs should not be poking at the internals of the CharDriverState struct. What vhost-user wants is a chardev that is operating as reconnectable network service, along with the ability to do FD passing over the connection. The colo code simply wants a network service. Add a feature concept to the char drivers so that chardev users can query the actual features they wish to have supported. The QemuOpts member is removed to prevent future mistakes in this area. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-07 15:18:34 +03:00
if (!qemu_chr_has_feature(chr, QEMU_CHAR_FEATURE_RECONNECTABLE)) {
error_setg(errp, "chardev \"%s\" is not reconnectable",
opts->chardev);
return NULL;
}
net: don't poke at chardev internal QemuOpts The vhost-user & colo code is poking at the QemuOpts instance in the CharDriverState struct, not realizing that it is valid for this to be NULL. e.g. the following crash shows a codepath where it will be NULL: Program terminated with signal SIGSEGV, Segmentation fault. #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 617 QTAILQ_FOREACH(opt, &opts->head, next) { [Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))] (gdb) bt #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 #1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314 #2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360 #3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051 #4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108 #5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186 #6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205 #7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978 #8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105 #9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319 #10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369 #11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124 #12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994 #13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387 #14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399 #15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927 #16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84 #17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213 #19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258 #20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506 #21 0x000055baf676587b in main_loop () at vl.c:1908 #22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604 (gdb) p opts $1 = (QemuOpts *) 0x0 The crash occurred when attaching vhost-user net via QMP: { "execute": "chardev-add", "arguments": { "id": "charnet2", "backend": { "type": "socket", "data": { "addr": { "type": "unix", "data": { "path": "/var/run/openvswitch/vhost-user1" } }, "wait": false, "server": false } } }, "id": "libvirt-19" } { "return": { }, "id": "libvirt-19" } { "execute": "netdev_add", "arguments": { "type": "vhost-user", "chardev": "charnet2", "id": "hostnet2" }, "id": "libvirt-20" } Code using chardevs should not be poking at the internals of the CharDriverState struct. What vhost-user wants is a chardev that is operating as reconnectable network service, along with the ability to do FD passing over the connection. The colo code simply wants a network service. Add a feature concept to the char drivers so that chardev users can query the actual features they wish to have supported. The QemuOpts member is removed to prevent future mistakes in this area. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-07 15:18:34 +03:00
if (!qemu_chr_has_feature(chr, QEMU_CHAR_FEATURE_FD_PASS)) {
error_setg(errp, "chardev \"%s\" does not support FD passing",
opts->chardev);
return NULL;
}
return chr;
}
static int net_vhost_check_net(void *opaque, QemuOpts *opts, Error **errp)
{
const char *name = opaque;
const char *driver, *netdev;
driver = qemu_opt_get(opts, "driver");
netdev = qemu_opt_get(opts, "netdev");
if (!driver || !netdev) {
return 0;
}
if (strcmp(netdev, name) == 0 &&
!g_str_has_prefix(driver, "virtio-net-")) {
error_setg(errp, "vhost-user requires frontend driver virtio-net-*");
return -1;
}
return 0;
}
int net_init_vhost_user(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
int queues;
const NetdevVhostUserOptions *vhost_user_opts;
Chardev *chr;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(netdev->type == NET_CLIENT_DRIVER_VHOST_USER);
vhost_user_opts = &netdev->u.vhost_user;
net: don't poke at chardev internal QemuOpts The vhost-user & colo code is poking at the QemuOpts instance in the CharDriverState struct, not realizing that it is valid for this to be NULL. e.g. the following crash shows a codepath where it will be NULL: Program terminated with signal SIGSEGV, Segmentation fault. #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 617 QTAILQ_FOREACH(opt, &opts->head, next) { [Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))] (gdb) bt #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 #1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314 #2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360 #3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051 #4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108 #5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186 #6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205 #7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978 #8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105 #9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319 #10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369 #11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124 #12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994 #13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387 #14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399 #15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927 #16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84 #17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213 #19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258 #20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506 #21 0x000055baf676587b in main_loop () at vl.c:1908 #22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604 (gdb) p opts $1 = (QemuOpts *) 0x0 The crash occurred when attaching vhost-user net via QMP: { "execute": "chardev-add", "arguments": { "id": "charnet2", "backend": { "type": "socket", "data": { "addr": { "type": "unix", "data": { "path": "/var/run/openvswitch/vhost-user1" } }, "wait": false, "server": false } } }, "id": "libvirt-19" } { "return": { }, "id": "libvirt-19" } { "execute": "netdev_add", "arguments": { "type": "vhost-user", "chardev": "charnet2", "id": "hostnet2" }, "id": "libvirt-20" } Code using chardevs should not be poking at the internals of the CharDriverState struct. What vhost-user wants is a chardev that is operating as reconnectable network service, along with the ability to do FD passing over the connection. The colo code simply wants a network service. Add a feature concept to the char drivers so that chardev users can query the actual features they wish to have supported. The QemuOpts member is removed to prevent future mistakes in this area. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-07 15:18:34 +03:00
chr = net_vhost_claim_chardev(vhost_user_opts, errp);
if (!chr) {
return -1;
}
/* verify net frontend */
if (qemu_opts_foreach(qemu_find_opts("device"), net_vhost_check_net,
(char *)name, errp)) {
return -1;
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
queues = vhost_user_opts->has_queues ? vhost_user_opts->queues : 1;
if (queues < 1 || queues > MAX_QUEUE_NUM) {
error_setg(errp,
"vhost-user number of queues must be in range [1, %d]",
MAX_QUEUE_NUM);
return -1;
}
vhost-user: add multiple queue support This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-23 07:20:00 +03:00
return net_vhost_user_init(peer, "vhost_user", name, chr, queues);
}