rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
/*
|
|
|
|
* QEMU rocker switch emulation - PCI device
|
|
|
|
*
|
|
|
|
* Copyright (c) 2014 Scott Feldman <sfeldma@gmail.com>
|
|
|
|
* Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
2016-01-26 21:17:11 +03:00
|
|
|
#include "qemu/osdep.h"
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
#include "hw/pci/pci.h"
|
2019-08-12 08:23:51 +03:00
|
|
|
#include "hw/qdev-properties.h"
|
2019-08-12 08:23:45 +03:00
|
|
|
#include "migration/vmstate.h"
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
#include "hw/pci/msix.h"
|
|
|
|
#include "net/net.h"
|
|
|
|
#include "net/eth.h"
|
2018-02-01 14:18:31 +03:00
|
|
|
#include "qapi/error.h"
|
2018-02-11 12:36:01 +03:00
|
|
|
#include "qapi/qapi-commands-rocker.h"
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
#include "qemu/iov.h"
|
2019-05-23 17:35:07 +03:00
|
|
|
#include "qemu/module.h"
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
#include "qemu/bitops.h"
|
|
|
|
|
|
|
|
#include "rocker.h"
|
|
|
|
#include "rocker_hw.h"
|
|
|
|
#include "rocker_fp.h"
|
|
|
|
#include "rocker_desc.h"
|
|
|
|
#include "rocker_tlv.h"
|
|
|
|
#include "rocker_world.h"
|
|
|
|
#include "rocker_of_dpa.h"
|
|
|
|
|
|
|
|
struct rocker {
|
|
|
|
/* private */
|
|
|
|
PCIDevice parent_obj;
|
|
|
|
/* public */
|
|
|
|
|
|
|
|
MemoryRegion mmio;
|
|
|
|
MemoryRegion msix_bar;
|
|
|
|
|
|
|
|
/* switch configuration */
|
|
|
|
char *name; /* switch name */
|
2016-02-25 17:31:58 +03:00
|
|
|
char *world_name; /* world name */
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
uint32_t fp_ports; /* front-panel port count */
|
|
|
|
NICPeers *fp_ports_peers;
|
|
|
|
MACAddr fp_start_macaddr; /* front-panel port 0 mac addr */
|
|
|
|
uint64_t switch_id; /* switch id */
|
|
|
|
|
|
|
|
/* front-panel ports */
|
|
|
|
FpPort *fp_port[ROCKER_FP_PORTS_MAX];
|
|
|
|
|
|
|
|
/* register backings */
|
|
|
|
uint32_t test_reg;
|
|
|
|
uint64_t test_reg64;
|
|
|
|
dma_addr_t test_dma_addr;
|
|
|
|
uint32_t test_dma_size;
|
|
|
|
uint64_t lower32; /* lower 32-bit val in 2-part 64-bit access */
|
|
|
|
|
|
|
|
/* desc rings */
|
|
|
|
DescRing **rings;
|
|
|
|
|
|
|
|
/* switch worlds */
|
|
|
|
World *worlds[ROCKER_WORLD_TYPE_MAX];
|
|
|
|
World *world_dflt;
|
|
|
|
|
|
|
|
QLIST_ENTRY(rocker) next;
|
|
|
|
};
|
|
|
|
|
2017-08-14 06:33:10 +03:00
|
|
|
#define TYPE_ROCKER "rocker"
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
|
2017-08-14 06:33:10 +03:00
|
|
|
#define ROCKER(obj) \
|
|
|
|
OBJECT_CHECK(Rocker, (obj), TYPE_ROCKER)
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
|
|
|
|
static QLIST_HEAD(, rocker) rockers;
|
|
|
|
|
|
|
|
Rocker *rocker_find(const char *name)
|
|
|
|
{
|
|
|
|
Rocker *r;
|
|
|
|
|
|
|
|
QLIST_FOREACH(r, &rockers, next)
|
|
|
|
if (strcmp(r->name, name) == 0) {
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
World *rocker_get_world(Rocker *r, enum rocker_world_type type)
|
|
|
|
{
|
|
|
|
if (type < ROCKER_WORLD_TYPE_MAX) {
|
|
|
|
return r->worlds[type];
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2015-06-11 04:21:21 +03:00
|
|
|
RockerSwitch *qmp_query_rocker(const char *name, Error **errp)
|
|
|
|
{
|
2015-06-25 09:24:10 +03:00
|
|
|
RockerSwitch *rocker;
|
2015-06-11 04:21:21 +03:00
|
|
|
Rocker *r;
|
|
|
|
|
|
|
|
r = rocker_find(name);
|
|
|
|
if (!r) {
|
2015-11-11 09:51:20 +03:00
|
|
|
error_setg(errp, "rocker %s not found", name);
|
2015-06-11 04:21:21 +03:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2015-06-25 09:24:10 +03:00
|
|
|
rocker = g_new0(RockerSwitch, 1);
|
2015-06-11 04:21:21 +03:00
|
|
|
rocker->name = g_strdup(r->name);
|
|
|
|
rocker->id = r->switch_id;
|
|
|
|
rocker->ports = r->fp_ports;
|
|
|
|
|
|
|
|
return rocker;
|
|
|
|
}
|
|
|
|
|
|
|
|
RockerPortList *qmp_query_rocker_ports(const char *name, Error **errp)
|
|
|
|
{
|
|
|
|
RockerPortList *list = NULL;
|
|
|
|
Rocker *r;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
r = rocker_find(name);
|
|
|
|
if (!r) {
|
2015-11-11 09:51:20 +03:00
|
|
|
error_setg(errp, "rocker %s not found", name);
|
2015-06-11 04:21:21 +03:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = r->fp_ports - 1; i >= 0; i--) {
|
|
|
|
RockerPortList *info = g_malloc0(sizeof(*info));
|
|
|
|
info->value = g_malloc0(sizeof(*info->value));
|
|
|
|
struct fp_port *port = r->fp_port[i];
|
|
|
|
|
|
|
|
fp_port_get_info(port, info);
|
|
|
|
info->next = list;
|
|
|
|
list = info;
|
|
|
|
}
|
|
|
|
|
|
|
|
return list;
|
|
|
|
}
|
|
|
|
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
uint32_t rocker_fp_ports(Rocker *r)
|
|
|
|
{
|
|
|
|
return r->fp_ports;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t rocker_get_pport_by_tx_ring(Rocker *r,
|
|
|
|
DescRing *ring)
|
|
|
|
{
|
|
|
|
return (desc_ring_index(ring) - 2) / 2 + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tx_consume(Rocker *r, DescInfo *info)
|
|
|
|
{
|
|
|
|
PCIDevice *dev = PCI_DEVICE(r);
|
|
|
|
char *buf = desc_get_buf(info, true);
|
|
|
|
RockerTlv *tlv_frag;
|
|
|
|
RockerTlv *tlvs[ROCKER_TLV_TX_MAX + 1];
|
|
|
|
struct iovec iov[ROCKER_TX_FRAGS_MAX] = { { 0, }, };
|
|
|
|
uint32_t pport;
|
|
|
|
uint32_t port;
|
|
|
|
uint16_t tx_offload = ROCKER_TX_OFFLOAD_NONE;
|
|
|
|
uint16_t tx_l3_csum_off = 0;
|
|
|
|
uint16_t tx_tso_mss = 0;
|
|
|
|
uint16_t tx_tso_hdr_len = 0;
|
|
|
|
int iovcnt = 0;
|
|
|
|
int err = ROCKER_OK;
|
|
|
|
int rem;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!buf) {
|
|
|
|
return -ROCKER_ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
rocker_tlv_parse(tlvs, ROCKER_TLV_TX_MAX, buf, desc_tlv_size(info));
|
|
|
|
|
|
|
|
if (!tlvs[ROCKER_TLV_TX_FRAGS]) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
pport = rocker_get_pport_by_tx_ring(r, desc_get_ring(info));
|
|
|
|
if (!fp_port_from_pport(pport, &port)) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_TX_OFFLOAD]) {
|
|
|
|
tx_offload = rocker_tlv_get_u8(tlvs[ROCKER_TLV_TX_OFFLOAD]);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (tx_offload) {
|
|
|
|
case ROCKER_TX_OFFLOAD_L3_CSUM:
|
|
|
|
if (!tlvs[ROCKER_TLV_TX_L3_CSUM_OFF]) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
2015-07-01 13:33:09 +03:00
|
|
|
break;
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
case ROCKER_TX_OFFLOAD_TSO:
|
|
|
|
if (!tlvs[ROCKER_TLV_TX_TSO_MSS] ||
|
|
|
|
!tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
2015-07-01 13:33:09 +03:00
|
|
|
break;
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_TX_L3_CSUM_OFF]) {
|
|
|
|
tx_l3_csum_off = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_L3_CSUM_OFF]);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_TX_TSO_MSS]) {
|
|
|
|
tx_tso_mss = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_MSS]);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]) {
|
|
|
|
tx_tso_hdr_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]);
|
|
|
|
}
|
|
|
|
|
|
|
|
rocker_tlv_for_each_nested(tlv_frag, tlvs[ROCKER_TLV_TX_FRAGS], rem) {
|
|
|
|
hwaddr frag_addr;
|
|
|
|
uint16_t frag_len;
|
|
|
|
|
|
|
|
if (rocker_tlv_type(tlv_frag) != ROCKER_TLV_TX_FRAG) {
|
|
|
|
err = -ROCKER_EINVAL;
|
|
|
|
goto err_bad_attr;
|
|
|
|
}
|
|
|
|
|
|
|
|
rocker_tlv_parse_nested(tlvs, ROCKER_TLV_TX_FRAG_ATTR_MAX, tlv_frag);
|
|
|
|
|
|
|
|
if (!tlvs[ROCKER_TLV_TX_FRAG_ATTR_ADDR] ||
|
|
|
|
!tlvs[ROCKER_TLV_TX_FRAG_ATTR_LEN]) {
|
|
|
|
err = -ROCKER_EINVAL;
|
|
|
|
goto err_bad_attr;
|
|
|
|
}
|
|
|
|
|
|
|
|
frag_addr = rocker_tlv_get_le64(tlvs[ROCKER_TLV_TX_FRAG_ATTR_ADDR]);
|
|
|
|
frag_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_FRAG_ATTR_LEN]);
|
|
|
|
|
2015-12-28 13:54:08 +03:00
|
|
|
if (iovcnt >= ROCKER_TX_FRAGS_MAX) {
|
|
|
|
goto err_too_many_frags;
|
|
|
|
}
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
iov[iovcnt].iov_len = frag_len;
|
|
|
|
iov[iovcnt].iov_base = g_malloc(frag_len);
|
|
|
|
|
2017-05-24 05:57:18 +03:00
|
|
|
pci_dma_read(dev, frag_addr, iov[iovcnt].iov_base,
|
|
|
|
iov[iovcnt].iov_len);
|
|
|
|
|
2015-12-28 13:54:08 +03:00
|
|
|
iovcnt++;
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
if (iovcnt) {
|
|
|
|
/* XXX perform Tx offloads */
|
|
|
|
/* XXX silence compiler for now */
|
|
|
|
tx_l3_csum_off += tx_tso_mss = tx_tso_hdr_len = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = fp_port_eg(r->fp_port[port], iov, iovcnt);
|
|
|
|
|
|
|
|
err_too_many_frags:
|
|
|
|
err_bad_attr:
|
|
|
|
for (i = 0; i < ROCKER_TX_FRAGS_MAX; i++) {
|
2015-08-26 14:17:18 +03:00
|
|
|
g_free(iov[i].iov_base);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int cmd_get_port_settings(Rocker *r,
|
|
|
|
DescInfo *info, char *buf,
|
|
|
|
RockerTlv *cmd_info_tlv)
|
|
|
|
{
|
|
|
|
RockerTlv *tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MAX + 1];
|
|
|
|
RockerTlv *nest;
|
|
|
|
FpPort *fp_port;
|
|
|
|
uint32_t pport;
|
|
|
|
uint32_t port;
|
|
|
|
uint32_t speed;
|
|
|
|
uint8_t duplex;
|
|
|
|
uint8_t autoneg;
|
|
|
|
uint8_t learning;
|
2015-06-11 04:21:18 +03:00
|
|
|
char *phys_name;
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
MACAddr macaddr;
|
|
|
|
enum rocker_world_type mode;
|
|
|
|
size_t tlv_size;
|
|
|
|
int pos;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
rocker_tlv_parse_nested(tlvs, ROCKER_TLV_CMD_PORT_SETTINGS_MAX,
|
|
|
|
cmd_info_tlv);
|
|
|
|
|
|
|
|
if (!tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
pport = rocker_tlv_get_le32(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]);
|
|
|
|
if (!fp_port_from_pport(pport, &port)) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
fp_port = r->fp_port[port];
|
|
|
|
|
|
|
|
err = fp_port_get_settings(fp_port, &speed, &duplex, &autoneg);
|
|
|
|
if (err) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
fp_port_get_macaddr(fp_port, &macaddr);
|
|
|
|
mode = world_type(fp_port_get_world(fp_port));
|
|
|
|
learning = fp_port_get_learning(fp_port);
|
2015-06-11 04:21:18 +03:00
|
|
|
phys_name = fp_port_get_name(fp_port);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
|
|
|
|
tlv_size = rocker_tlv_total_size(0) + /* nest */
|
|
|
|
rocker_tlv_total_size(sizeof(uint32_t)) + /* pport */
|
|
|
|
rocker_tlv_total_size(sizeof(uint32_t)) + /* speed */
|
|
|
|
rocker_tlv_total_size(sizeof(uint8_t)) + /* duplex */
|
|
|
|
rocker_tlv_total_size(sizeof(uint8_t)) + /* autoneg */
|
|
|
|
rocker_tlv_total_size(sizeof(macaddr.a)) + /* macaddr */
|
|
|
|
rocker_tlv_total_size(sizeof(uint8_t)) + /* mode */
|
2015-06-11 04:21:18 +03:00
|
|
|
rocker_tlv_total_size(sizeof(uint8_t)) + /* learning */
|
|
|
|
rocker_tlv_total_size(strlen(phys_name));
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
|
|
|
|
if (tlv_size > desc_buf_size(info)) {
|
|
|
|
return -ROCKER_EMSGSIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
pos = 0;
|
|
|
|
nest = rocker_tlv_nest_start(buf, &pos, ROCKER_TLV_CMD_INFO);
|
|
|
|
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_PPORT, pport);
|
|
|
|
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_SPEED, speed);
|
|
|
|
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_DUPLEX, duplex);
|
|
|
|
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_AUTONEG, autoneg);
|
|
|
|
rocker_tlv_put(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR,
|
|
|
|
sizeof(macaddr.a), macaddr.a);
|
|
|
|
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_MODE, mode);
|
|
|
|
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_LEARNING,
|
|
|
|
learning);
|
2015-06-11 04:21:18 +03:00
|
|
|
rocker_tlv_put(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_PHYS_NAME,
|
|
|
|
strlen(phys_name), phys_name);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
rocker_tlv_nest_end(buf, &pos, nest);
|
|
|
|
|
|
|
|
return desc_set_buf(info, tlv_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int cmd_set_port_settings(Rocker *r,
|
|
|
|
RockerTlv *cmd_info_tlv)
|
|
|
|
{
|
|
|
|
RockerTlv *tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MAX + 1];
|
|
|
|
FpPort *fp_port;
|
|
|
|
uint32_t pport;
|
|
|
|
uint32_t port;
|
|
|
|
uint32_t speed;
|
|
|
|
uint8_t duplex;
|
|
|
|
uint8_t autoneg;
|
|
|
|
uint8_t learning;
|
|
|
|
MACAddr macaddr;
|
|
|
|
enum rocker_world_type mode;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
rocker_tlv_parse_nested(tlvs, ROCKER_TLV_CMD_PORT_SETTINGS_MAX,
|
|
|
|
cmd_info_tlv);
|
|
|
|
|
|
|
|
if (!tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
pport = rocker_tlv_get_le32(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]);
|
|
|
|
if (!fp_port_from_pport(pport, &port)) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
fp_port = r->fp_port[port];
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_SPEED] &&
|
|
|
|
tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_DUPLEX] &&
|
|
|
|
tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_AUTONEG]) {
|
|
|
|
|
|
|
|
speed = rocker_tlv_get_le32(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_SPEED]);
|
|
|
|
duplex = rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_DUPLEX]);
|
|
|
|
autoneg = rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_AUTONEG]);
|
|
|
|
|
|
|
|
err = fp_port_set_settings(fp_port, speed, duplex, autoneg);
|
|
|
|
if (err) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR]) {
|
|
|
|
if (rocker_tlv_len(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR]) !=
|
|
|
|
sizeof(macaddr.a)) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
memcpy(macaddr.a,
|
|
|
|
rocker_tlv_data(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR]),
|
|
|
|
sizeof(macaddr.a));
|
|
|
|
fp_port_set_macaddr(fp_port, &macaddr);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MODE]) {
|
|
|
|
mode = rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MODE]);
|
2016-02-25 17:31:55 +03:00
|
|
|
if (mode >= ROCKER_WORLD_TYPE_MAX) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
/* We don't support world change. */
|
|
|
|
if (!fp_port_check_world(fp_port, r->worlds[mode])) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_LEARNING]) {
|
|
|
|
learning =
|
|
|
|
rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_LEARNING]);
|
|
|
|
fp_port_set_learning(fp_port, learning);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ROCKER_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int cmd_consume(Rocker *r, DescInfo *info)
|
|
|
|
{
|
|
|
|
char *buf = desc_get_buf(info, false);
|
|
|
|
RockerTlv *tlvs[ROCKER_TLV_CMD_MAX + 1];
|
|
|
|
RockerTlv *info_tlv;
|
|
|
|
World *world;
|
|
|
|
uint16_t cmd;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!buf) {
|
|
|
|
return -ROCKER_ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
rocker_tlv_parse(tlvs, ROCKER_TLV_CMD_MAX, buf, desc_tlv_size(info));
|
|
|
|
|
|
|
|
if (!tlvs[ROCKER_TLV_CMD_TYPE] || !tlvs[ROCKER_TLV_CMD_INFO]) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
cmd = rocker_tlv_get_le16(tlvs[ROCKER_TLV_CMD_TYPE]);
|
|
|
|
info_tlv = tlvs[ROCKER_TLV_CMD_INFO];
|
|
|
|
|
|
|
|
/* This might be reworked to something like this:
|
|
|
|
* Every world will have an array of command handlers from
|
|
|
|
* ROCKER_TLV_CMD_TYPE_UNSPEC to ROCKER_TLV_CMD_TYPE_MAX. There is
|
|
|
|
* up to each world to implement whatever command it want.
|
|
|
|
* It can reference "generic" commands as cmd_set_port_settings or
|
|
|
|
* cmd_get_port_settings
|
|
|
|
*/
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_ADD:
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_MOD:
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_DEL:
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_GET_STATS:
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_ADD:
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_MOD:
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_DEL:
|
|
|
|
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_GET_STATS:
|
|
|
|
world = r->worlds[ROCKER_WORLD_TYPE_OF_DPA];
|
|
|
|
err = world_do_cmd(world, info, buf, cmd, info_tlv);
|
|
|
|
break;
|
|
|
|
case ROCKER_TLV_CMD_TYPE_GET_PORT_SETTINGS:
|
|
|
|
err = cmd_get_port_settings(r, info, buf, info_tlv);
|
|
|
|
break;
|
|
|
|
case ROCKER_TLV_CMD_TYPE_SET_PORT_SETTINGS:
|
|
|
|
err = cmd_set_port_settings(r, info_tlv);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
err = -ROCKER_EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_msix_irq(Rocker *r, unsigned vector)
|
|
|
|
{
|
|
|
|
PCIDevice *dev = PCI_DEVICE(r);
|
|
|
|
|
|
|
|
DPRINTF("MSI-X notify request for vector %d\n", vector);
|
|
|
|
if (vector >= ROCKER_MSIX_VEC_COUNT(r->fp_ports)) {
|
|
|
|
DPRINTF("incorrect vector %d\n", vector);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
msix_notify(dev, vector);
|
|
|
|
}
|
|
|
|
|
|
|
|
int rocker_event_link_changed(Rocker *r, uint32_t pport, bool link_up)
|
|
|
|
{
|
|
|
|
DescRing *ring = r->rings[ROCKER_RING_EVENT];
|
|
|
|
DescInfo *info = desc_ring_fetch_desc(ring);
|
|
|
|
RockerTlv *nest;
|
|
|
|
char *buf;
|
|
|
|
size_t tlv_size;
|
|
|
|
int pos;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!info) {
|
|
|
|
return -ROCKER_ENOBUFS;
|
|
|
|
}
|
|
|
|
|
|
|
|
tlv_size = rocker_tlv_total_size(sizeof(uint16_t)) + /* event type */
|
|
|
|
rocker_tlv_total_size(0) + /* nest */
|
|
|
|
rocker_tlv_total_size(sizeof(uint32_t)) + /* pport */
|
|
|
|
rocker_tlv_total_size(sizeof(uint8_t)); /* link up */
|
|
|
|
|
|
|
|
if (tlv_size > desc_buf_size(info)) {
|
|
|
|
err = -ROCKER_EMSGSIZE;
|
|
|
|
goto err_too_big;
|
|
|
|
}
|
|
|
|
|
|
|
|
buf = desc_get_buf(info, false);
|
|
|
|
if (!buf) {
|
|
|
|
err = -ROCKER_ENOMEM;
|
|
|
|
goto err_no_mem;
|
|
|
|
}
|
|
|
|
|
|
|
|
pos = 0;
|
|
|
|
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_TYPE,
|
|
|
|
ROCKER_TLV_EVENT_TYPE_LINK_CHANGED);
|
|
|
|
nest = rocker_tlv_nest_start(buf, &pos, ROCKER_TLV_EVENT_INFO);
|
|
|
|
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_LINK_CHANGED_PPORT, pport);
|
|
|
|
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_EVENT_LINK_CHANGED_LINKUP,
|
|
|
|
link_up ? 1 : 0);
|
|
|
|
rocker_tlv_nest_end(buf, &pos, nest);
|
|
|
|
|
|
|
|
err = desc_set_buf(info, tlv_size);
|
|
|
|
|
|
|
|
err_too_big:
|
|
|
|
err_no_mem:
|
|
|
|
if (desc_ring_post_desc(ring, err)) {
|
|
|
|
rocker_msix_irq(r, ROCKER_MSIX_VEC_EVENT);
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
int rocker_event_mac_vlan_seen(Rocker *r, uint32_t pport, uint8_t *addr,
|
|
|
|
uint16_t vlan_id)
|
|
|
|
{
|
|
|
|
DescRing *ring = r->rings[ROCKER_RING_EVENT];
|
|
|
|
DescInfo *info;
|
|
|
|
FpPort *fp_port;
|
|
|
|
uint32_t port;
|
|
|
|
RockerTlv *nest;
|
|
|
|
char *buf;
|
|
|
|
size_t tlv_size;
|
|
|
|
int pos;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!fp_port_from_pport(pport, &port)) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
fp_port = r->fp_port[port];
|
|
|
|
if (!fp_port_get_learning(fp_port)) {
|
|
|
|
return ROCKER_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
info = desc_ring_fetch_desc(ring);
|
|
|
|
if (!info) {
|
|
|
|
return -ROCKER_ENOBUFS;
|
|
|
|
}
|
|
|
|
|
|
|
|
tlv_size = rocker_tlv_total_size(sizeof(uint16_t)) + /* event type */
|
|
|
|
rocker_tlv_total_size(0) + /* nest */
|
|
|
|
rocker_tlv_total_size(sizeof(uint32_t)) + /* pport */
|
|
|
|
rocker_tlv_total_size(ETH_ALEN) + /* mac addr */
|
|
|
|
rocker_tlv_total_size(sizeof(uint16_t)); /* vlan_id */
|
|
|
|
|
|
|
|
if (tlv_size > desc_buf_size(info)) {
|
|
|
|
err = -ROCKER_EMSGSIZE;
|
|
|
|
goto err_too_big;
|
|
|
|
}
|
|
|
|
|
|
|
|
buf = desc_get_buf(info, false);
|
|
|
|
if (!buf) {
|
|
|
|
err = -ROCKER_ENOMEM;
|
|
|
|
goto err_no_mem;
|
|
|
|
}
|
|
|
|
|
|
|
|
pos = 0;
|
|
|
|
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_TYPE,
|
|
|
|
ROCKER_TLV_EVENT_TYPE_MAC_VLAN_SEEN);
|
|
|
|
nest = rocker_tlv_nest_start(buf, &pos, ROCKER_TLV_EVENT_INFO);
|
|
|
|
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_MAC_VLAN_PPORT, pport);
|
|
|
|
rocker_tlv_put(buf, &pos, ROCKER_TLV_EVENT_MAC_VLAN_MAC, ETH_ALEN, addr);
|
|
|
|
rocker_tlv_put_u16(buf, &pos, ROCKER_TLV_EVENT_MAC_VLAN_VLAN_ID, vlan_id);
|
|
|
|
rocker_tlv_nest_end(buf, &pos, nest);
|
|
|
|
|
|
|
|
err = desc_set_buf(info, tlv_size);
|
|
|
|
|
|
|
|
err_too_big:
|
|
|
|
err_no_mem:
|
|
|
|
if (desc_ring_post_desc(ring, err)) {
|
|
|
|
rocker_msix_irq(r, ROCKER_MSIX_VEC_EVENT);
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static DescRing *rocker_get_rx_ring_by_pport(Rocker *r,
|
|
|
|
uint32_t pport)
|
|
|
|
{
|
|
|
|
return r->rings[(pport - 1) * 2 + 3];
|
|
|
|
}
|
|
|
|
|
|
|
|
int rx_produce(World *world, uint32_t pport,
|
2015-07-01 13:33:11 +03:00
|
|
|
const struct iovec *iov, int iovcnt, uint8_t copy_to_cpu)
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
{
|
|
|
|
Rocker *r = world_rocker(world);
|
|
|
|
PCIDevice *dev = (PCIDevice *)r;
|
|
|
|
DescRing *ring = rocker_get_rx_ring_by_pport(r, pport);
|
|
|
|
DescInfo *info = desc_ring_fetch_desc(ring);
|
|
|
|
char *data;
|
|
|
|
size_t data_size = iov_size(iov, iovcnt);
|
|
|
|
char *buf;
|
|
|
|
uint16_t rx_flags = 0;
|
|
|
|
uint16_t rx_csum = 0;
|
|
|
|
size_t tlv_size;
|
|
|
|
RockerTlv *tlvs[ROCKER_TLV_RX_MAX + 1];
|
|
|
|
hwaddr frag_addr;
|
|
|
|
uint16_t frag_max_len;
|
|
|
|
int pos;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!info) {
|
|
|
|
return -ROCKER_ENOBUFS;
|
|
|
|
}
|
|
|
|
|
|
|
|
buf = desc_get_buf(info, false);
|
|
|
|
if (!buf) {
|
|
|
|
err = -ROCKER_ENXIO;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
rocker_tlv_parse(tlvs, ROCKER_TLV_RX_MAX, buf, desc_tlv_size(info));
|
|
|
|
|
|
|
|
if (!tlvs[ROCKER_TLV_RX_FRAG_ADDR] ||
|
|
|
|
!tlvs[ROCKER_TLV_RX_FRAG_MAX_LEN]) {
|
|
|
|
err = -ROCKER_EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
frag_addr = rocker_tlv_get_le64(tlvs[ROCKER_TLV_RX_FRAG_ADDR]);
|
|
|
|
frag_max_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_RX_FRAG_MAX_LEN]);
|
|
|
|
|
|
|
|
if (data_size > frag_max_len) {
|
|
|
|
err = -ROCKER_EMSGSIZE;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2015-07-01 13:33:11 +03:00
|
|
|
if (copy_to_cpu) {
|
|
|
|
rx_flags |= ROCKER_RX_FLAGS_FWD_OFFLOAD;
|
|
|
|
}
|
|
|
|
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
/* XXX calc rx flags/csum */
|
|
|
|
|
|
|
|
tlv_size = rocker_tlv_total_size(sizeof(uint16_t)) + /* flags */
|
|
|
|
rocker_tlv_total_size(sizeof(uint16_t)) + /* scum */
|
|
|
|
rocker_tlv_total_size(sizeof(uint64_t)) + /* frag addr */
|
|
|
|
rocker_tlv_total_size(sizeof(uint16_t)) + /* frag max len */
|
|
|
|
rocker_tlv_total_size(sizeof(uint16_t)); /* frag len */
|
|
|
|
|
|
|
|
if (tlv_size > desc_buf_size(info)) {
|
|
|
|
err = -ROCKER_EMSGSIZE;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* TODO:
|
|
|
|
* iov dma write can be optimized in similar way e1000 does it in
|
|
|
|
* e1000_receive_iov. But maybe if would make sense to introduce
|
|
|
|
* generic helper iov_dma_write.
|
|
|
|
*/
|
|
|
|
|
|
|
|
data = g_malloc(data_size);
|
2017-08-14 06:33:07 +03:00
|
|
|
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
iov_to_buf(iov, iovcnt, 0, data, data_size);
|
|
|
|
pci_dma_write(dev, frag_addr, data, data_size);
|
|
|
|
g_free(data);
|
|
|
|
|
|
|
|
pos = 0;
|
|
|
|
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_FLAGS, rx_flags);
|
|
|
|
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_CSUM, rx_csum);
|
|
|
|
rocker_tlv_put_le64(buf, &pos, ROCKER_TLV_RX_FRAG_ADDR, frag_addr);
|
|
|
|
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_FRAG_MAX_LEN, frag_max_len);
|
|
|
|
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_FRAG_LEN, data_size);
|
|
|
|
|
|
|
|
err = desc_set_buf(info, tlv_size);
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (desc_ring_post_desc(ring, err)) {
|
|
|
|
rocker_msix_irq(r, ROCKER_MSIX_VEC_RX(pport - 1));
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
int rocker_port_eg(Rocker *r, uint32_t pport,
|
|
|
|
const struct iovec *iov, int iovcnt)
|
|
|
|
{
|
|
|
|
FpPort *fp_port;
|
|
|
|
uint32_t port;
|
|
|
|
|
|
|
|
if (!fp_port_from_pport(pport, &port)) {
|
|
|
|
return -ROCKER_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
fp_port = r->fp_port[port];
|
|
|
|
|
|
|
|
return fp_port_eg(fp_port, iov, iovcnt);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_test_dma_ctrl(Rocker *r, uint32_t val)
|
|
|
|
{
|
|
|
|
PCIDevice *dev = PCI_DEVICE(r);
|
|
|
|
char *buf;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
buf = g_malloc(r->test_dma_size);
|
|
|
|
|
|
|
|
switch (val) {
|
|
|
|
case ROCKER_TEST_DMA_CTRL_CLEAR:
|
|
|
|
memset(buf, 0, r->test_dma_size);
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_CTRL_FILL:
|
|
|
|
memset(buf, 0x96, r->test_dma_size);
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_CTRL_INVERT:
|
|
|
|
pci_dma_read(dev, r->test_dma_addr, buf, r->test_dma_size);
|
|
|
|
for (i = 0; i < r->test_dma_size; i++) {
|
|
|
|
buf[i] = ~buf[i];
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not test dma control val=0x%08x\n", val);
|
|
|
|
goto err_out;
|
|
|
|
}
|
|
|
|
pci_dma_write(dev, r->test_dma_addr, buf, r->test_dma_size);
|
|
|
|
|
|
|
|
rocker_msix_irq(r, ROCKER_MSIX_VEC_TEST);
|
|
|
|
|
|
|
|
err_out:
|
|
|
|
g_free(buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_reset(DeviceState *dev);
|
|
|
|
|
|
|
|
static void rocker_control(Rocker *r, uint32_t val)
|
|
|
|
{
|
|
|
|
if (val & ROCKER_CONTROL_RESET) {
|
|
|
|
rocker_reset(DEVICE(r));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rocker_pci_ring_count(Rocker *r)
|
|
|
|
{
|
|
|
|
/* There are:
|
|
|
|
* - command ring
|
|
|
|
* - event ring
|
|
|
|
* - tx and rx ring per each port
|
|
|
|
*/
|
|
|
|
return 2 + (2 * r->fp_ports);
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool rocker_addr_is_desc_reg(Rocker *r, hwaddr addr)
|
|
|
|
{
|
|
|
|
hwaddr start = ROCKER_DMA_DESC_BASE;
|
|
|
|
hwaddr end = start + (ROCKER_DMA_DESC_SIZE * rocker_pci_ring_count(r));
|
|
|
|
|
|
|
|
return addr >= start && addr < end;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_port_phys_enable_write(Rocker *r, uint64_t new)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
bool old_enabled;
|
|
|
|
bool new_enabled;
|
|
|
|
FpPort *fp_port;
|
|
|
|
|
|
|
|
for (i = 0; i < r->fp_ports; i++) {
|
|
|
|
fp_port = r->fp_port[i];
|
|
|
|
old_enabled = fp_port_enabled(fp_port);
|
|
|
|
new_enabled = (new >> (i + 1)) & 0x1;
|
|
|
|
if (new_enabled == old_enabled) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (new_enabled) {
|
|
|
|
fp_port_enable(r->fp_port[i]);
|
|
|
|
} else {
|
|
|
|
fp_port_disable(r->fp_port[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_io_writel(void *opaque, hwaddr addr, uint32_t val)
|
|
|
|
{
|
|
|
|
Rocker *r = opaque;
|
|
|
|
|
|
|
|
if (rocker_addr_is_desc_reg(r, addr)) {
|
|
|
|
unsigned index = ROCKER_RING_INDEX(addr);
|
|
|
|
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
|
|
|
|
|
|
|
|
switch (offset) {
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET:
|
|
|
|
r->lower32 = (uint64_t)val;
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET + 4:
|
|
|
|
desc_ring_set_base_addr(r->rings[index],
|
|
|
|
((uint64_t)val) << 32 | r->lower32);
|
|
|
|
r->lower32 = 0;
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_SIZE_OFFSET:
|
|
|
|
desc_ring_set_size(r->rings[index], val);
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_HEAD_OFFSET:
|
|
|
|
if (desc_ring_set_head(r->rings[index], val)) {
|
|
|
|
rocker_msix_irq(r, desc_ring_get_msix_vector(r->rings[index]));
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_CTRL_OFFSET:
|
|
|
|
desc_ring_set_ctrl(r->rings[index], val);
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_CREDITS_OFFSET:
|
|
|
|
if (desc_ring_ret_credits(r->rings[index], val)) {
|
|
|
|
rocker_msix_irq(r, desc_ring_get_msix_vector(r->rings[index]));
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented dma reg write(l) addr=0x" TARGET_FMT_plx
|
|
|
|
" val=0x%08x (ring %d, addr=0x%02x)\n",
|
|
|
|
addr, val, index, offset);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (addr) {
|
|
|
|
case ROCKER_TEST_REG:
|
|
|
|
r->test_reg = val;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_REG64:
|
|
|
|
case ROCKER_TEST_DMA_ADDR:
|
|
|
|
case ROCKER_PORT_PHYS_ENABLE:
|
|
|
|
r->lower32 = (uint64_t)val;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_REG64 + 4:
|
|
|
|
r->test_reg64 = ((uint64_t)val) << 32 | r->lower32;
|
|
|
|
r->lower32 = 0;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_IRQ:
|
|
|
|
rocker_msix_irq(r, val);
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_SIZE:
|
2016-10-12 12:10:55 +03:00
|
|
|
r->test_dma_size = val & 0xFFFF;
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_ADDR + 4:
|
|
|
|
r->test_dma_addr = ((uint64_t)val) << 32 | r->lower32;
|
|
|
|
r->lower32 = 0;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_CTRL:
|
|
|
|
rocker_test_dma_ctrl(r, val);
|
|
|
|
break;
|
|
|
|
case ROCKER_CONTROL:
|
|
|
|
rocker_control(r, val);
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_ENABLE + 4:
|
|
|
|
rocker_port_phys_enable_write(r, ((uint64_t)val) << 32 | r->lower32);
|
|
|
|
r->lower32 = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented write(l) addr=0x" TARGET_FMT_plx
|
|
|
|
" val=0x%08x\n", addr, val);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_io_writeq(void *opaque, hwaddr addr, uint64_t val)
|
|
|
|
{
|
|
|
|
Rocker *r = opaque;
|
|
|
|
|
|
|
|
if (rocker_addr_is_desc_reg(r, addr)) {
|
|
|
|
unsigned index = ROCKER_RING_INDEX(addr);
|
|
|
|
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
|
|
|
|
|
|
|
|
switch (offset) {
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET:
|
|
|
|
desc_ring_set_base_addr(r->rings[index], val);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented dma reg write(q) addr=0x" TARGET_FMT_plx
|
|
|
|
" val=0x" TARGET_FMT_plx " (ring %d, offset=0x%02x)\n",
|
|
|
|
addr, val, index, offset);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (addr) {
|
|
|
|
case ROCKER_TEST_REG64:
|
|
|
|
r->test_reg64 = val;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_ADDR:
|
|
|
|
r->test_dma_addr = val;
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_ENABLE:
|
|
|
|
rocker_port_phys_enable_write(r, val);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented write(q) addr=0x" TARGET_FMT_plx
|
|
|
|
" val=0x" TARGET_FMT_plx "\n", addr, val);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef DEBUG_ROCKER
|
|
|
|
#define regname(reg) case (reg): return #reg
|
|
|
|
static const char *rocker_reg_name(void *opaque, hwaddr addr)
|
|
|
|
{
|
|
|
|
Rocker *r = opaque;
|
|
|
|
|
|
|
|
if (rocker_addr_is_desc_reg(r, addr)) {
|
|
|
|
unsigned index = ROCKER_RING_INDEX(addr);
|
|
|
|
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
|
|
|
|
static char buf[100];
|
|
|
|
char ring_name[10];
|
|
|
|
|
|
|
|
switch (index) {
|
|
|
|
case 0:
|
|
|
|
sprintf(ring_name, "cmd");
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
sprintf(ring_name, "event");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
sprintf(ring_name, "%s-%d", index % 2 ? "rx" : "tx",
|
|
|
|
(index - 2) / 2);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (offset) {
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET:
|
|
|
|
sprintf(buf, "Ring[%s] ADDR", ring_name);
|
|
|
|
return buf;
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET+4:
|
|
|
|
sprintf(buf, "Ring[%s] ADDR+4", ring_name);
|
|
|
|
return buf;
|
|
|
|
case ROCKER_DMA_DESC_SIZE_OFFSET:
|
|
|
|
sprintf(buf, "Ring[%s] SIZE", ring_name);
|
|
|
|
return buf;
|
|
|
|
case ROCKER_DMA_DESC_HEAD_OFFSET:
|
|
|
|
sprintf(buf, "Ring[%s] HEAD", ring_name);
|
|
|
|
return buf;
|
|
|
|
case ROCKER_DMA_DESC_TAIL_OFFSET:
|
|
|
|
sprintf(buf, "Ring[%s] TAIL", ring_name);
|
|
|
|
return buf;
|
|
|
|
case ROCKER_DMA_DESC_CTRL_OFFSET:
|
|
|
|
sprintf(buf, "Ring[%s] CTRL", ring_name);
|
|
|
|
return buf;
|
|
|
|
case ROCKER_DMA_DESC_CREDITS_OFFSET:
|
|
|
|
sprintf(buf, "Ring[%s] CREDITS", ring_name);
|
|
|
|
return buf;
|
|
|
|
default:
|
|
|
|
sprintf(buf, "Ring[%s] ???", ring_name);
|
|
|
|
return buf;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
switch (addr) {
|
|
|
|
regname(ROCKER_BOGUS_REG0);
|
|
|
|
regname(ROCKER_BOGUS_REG1);
|
|
|
|
regname(ROCKER_BOGUS_REG2);
|
|
|
|
regname(ROCKER_BOGUS_REG3);
|
|
|
|
regname(ROCKER_TEST_REG);
|
|
|
|
regname(ROCKER_TEST_REG64);
|
|
|
|
regname(ROCKER_TEST_REG64+4);
|
|
|
|
regname(ROCKER_TEST_IRQ);
|
|
|
|
regname(ROCKER_TEST_DMA_ADDR);
|
|
|
|
regname(ROCKER_TEST_DMA_ADDR+4);
|
|
|
|
regname(ROCKER_TEST_DMA_SIZE);
|
|
|
|
regname(ROCKER_TEST_DMA_CTRL);
|
|
|
|
regname(ROCKER_CONTROL);
|
|
|
|
regname(ROCKER_PORT_PHYS_COUNT);
|
|
|
|
regname(ROCKER_PORT_PHYS_LINK_STATUS);
|
|
|
|
regname(ROCKER_PORT_PHYS_LINK_STATUS+4);
|
|
|
|
regname(ROCKER_PORT_PHYS_ENABLE);
|
|
|
|
regname(ROCKER_PORT_PHYS_ENABLE+4);
|
|
|
|
regname(ROCKER_SWITCH_ID);
|
|
|
|
regname(ROCKER_SWITCH_ID+4);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return "???";
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static const char *rocker_reg_name(void *opaque, hwaddr addr)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static void rocker_mmio_write(void *opaque, hwaddr addr, uint64_t val,
|
|
|
|
unsigned size)
|
|
|
|
{
|
|
|
|
DPRINTF("Write %s addr " TARGET_FMT_plx
|
|
|
|
", size %u, val " TARGET_FMT_plx "\n",
|
|
|
|
rocker_reg_name(opaque, addr), addr, size, val);
|
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 4:
|
|
|
|
rocker_io_writel(opaque, addr, val);
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
rocker_io_writeq(opaque, addr, val);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t rocker_port_phys_link_status(Rocker *r)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
uint64_t status = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < r->fp_ports; i++) {
|
|
|
|
FpPort *port = r->fp_port[i];
|
|
|
|
|
|
|
|
if (fp_port_get_link_up(port)) {
|
|
|
|
status |= 1 << (i + 1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t rocker_port_phys_enable_read(Rocker *r)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
uint64_t ret = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < r->fp_ports; i++) {
|
|
|
|
FpPort *port = r->fp_port[i];
|
|
|
|
|
|
|
|
if (fp_port_enabled(port)) {
|
|
|
|
ret |= 1 << (i + 1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t rocker_io_readl(void *opaque, hwaddr addr)
|
|
|
|
{
|
|
|
|
Rocker *r = opaque;
|
|
|
|
uint32_t ret;
|
|
|
|
|
|
|
|
if (rocker_addr_is_desc_reg(r, addr)) {
|
|
|
|
unsigned index = ROCKER_RING_INDEX(addr);
|
|
|
|
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
|
|
|
|
|
|
|
|
switch (offset) {
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET:
|
|
|
|
ret = (uint32_t)desc_ring_get_base_addr(r->rings[index]);
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET + 4:
|
|
|
|
ret = (uint32_t)(desc_ring_get_base_addr(r->rings[index]) >> 32);
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_SIZE_OFFSET:
|
|
|
|
ret = desc_ring_get_size(r->rings[index]);
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_HEAD_OFFSET:
|
|
|
|
ret = desc_ring_get_head(r->rings[index]);
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_TAIL_OFFSET:
|
|
|
|
ret = desc_ring_get_tail(r->rings[index]);
|
|
|
|
break;
|
|
|
|
case ROCKER_DMA_DESC_CREDITS_OFFSET:
|
|
|
|
ret = desc_ring_get_credits(r->rings[index]);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented dma reg read(l) addr=0x" TARGET_FMT_plx
|
|
|
|
" (ring %d, addr=0x%02x)\n", addr, index, offset);
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (addr) {
|
|
|
|
case ROCKER_BOGUS_REG0:
|
|
|
|
case ROCKER_BOGUS_REG1:
|
|
|
|
case ROCKER_BOGUS_REG2:
|
|
|
|
case ROCKER_BOGUS_REG3:
|
|
|
|
ret = 0xDEADBABE;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_REG:
|
|
|
|
ret = r->test_reg * 2;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_REG64:
|
|
|
|
ret = (uint32_t)(r->test_reg64 * 2);
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_REG64 + 4:
|
|
|
|
ret = (uint32_t)((r->test_reg64 * 2) >> 32);
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_SIZE:
|
|
|
|
ret = r->test_dma_size;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_ADDR:
|
|
|
|
ret = (uint32_t)r->test_dma_addr;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_ADDR + 4:
|
|
|
|
ret = (uint32_t)(r->test_dma_addr >> 32);
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_COUNT:
|
|
|
|
ret = r->fp_ports;
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_LINK_STATUS:
|
|
|
|
ret = (uint32_t)rocker_port_phys_link_status(r);
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_LINK_STATUS + 4:
|
|
|
|
ret = (uint32_t)(rocker_port_phys_link_status(r) >> 32);
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_ENABLE:
|
|
|
|
ret = (uint32_t)rocker_port_phys_enable_read(r);
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_ENABLE + 4:
|
|
|
|
ret = (uint32_t)(rocker_port_phys_enable_read(r) >> 32);
|
|
|
|
break;
|
|
|
|
case ROCKER_SWITCH_ID:
|
|
|
|
ret = (uint32_t)r->switch_id;
|
|
|
|
break;
|
|
|
|
case ROCKER_SWITCH_ID + 4:
|
|
|
|
ret = (uint32_t)(r->switch_id >> 32);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented read(l) addr=0x" TARGET_FMT_plx "\n", addr);
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t rocker_io_readq(void *opaque, hwaddr addr)
|
|
|
|
{
|
|
|
|
Rocker *r = opaque;
|
|
|
|
uint64_t ret;
|
|
|
|
|
|
|
|
if (rocker_addr_is_desc_reg(r, addr)) {
|
|
|
|
unsigned index = ROCKER_RING_INDEX(addr);
|
|
|
|
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
|
|
|
|
|
|
|
|
switch (addr & ROCKER_DMA_DESC_MASK) {
|
|
|
|
case ROCKER_DMA_DESC_ADDR_OFFSET:
|
|
|
|
ret = desc_ring_get_base_addr(r->rings[index]);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented dma reg read(q) addr=0x" TARGET_FMT_plx
|
|
|
|
" (ring %d, addr=0x%02x)\n", addr, index, offset);
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (addr) {
|
|
|
|
case ROCKER_BOGUS_REG0:
|
|
|
|
case ROCKER_BOGUS_REG2:
|
|
|
|
ret = 0xDEADBABEDEADBABEULL;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_REG64:
|
|
|
|
ret = r->test_reg64 * 2;
|
|
|
|
break;
|
|
|
|
case ROCKER_TEST_DMA_ADDR:
|
|
|
|
ret = r->test_dma_addr;
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_LINK_STATUS:
|
|
|
|
ret = rocker_port_phys_link_status(r);
|
|
|
|
break;
|
|
|
|
case ROCKER_PORT_PHYS_ENABLE:
|
|
|
|
ret = rocker_port_phys_enable_read(r);
|
|
|
|
break;
|
|
|
|
case ROCKER_SWITCH_ID:
|
|
|
|
ret = r->switch_id;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DPRINTF("not implemented read(q) addr=0x" TARGET_FMT_plx "\n", addr);
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t rocker_mmio_read(void *opaque, hwaddr addr, unsigned size)
|
|
|
|
{
|
|
|
|
DPRINTF("Read %s addr " TARGET_FMT_plx ", size %u\n",
|
|
|
|
rocker_reg_name(opaque, addr), addr, size);
|
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 4:
|
|
|
|
return rocker_io_readl(opaque, addr);
|
|
|
|
case 8:
|
|
|
|
return rocker_io_readq(opaque, addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps rocker_mmio_ops = {
|
|
|
|
.read = rocker_mmio_read,
|
|
|
|
.write = rocker_mmio_write,
|
|
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
|
|
.valid = {
|
|
|
|
.min_access_size = 4,
|
|
|
|
.max_access_size = 8,
|
|
|
|
},
|
|
|
|
.impl = {
|
|
|
|
.min_access_size = 4,
|
|
|
|
.max_access_size = 8,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static void rocker_msix_vectors_unuse(Rocker *r,
|
|
|
|
unsigned int num_vectors)
|
|
|
|
{
|
|
|
|
PCIDevice *dev = PCI_DEVICE(r);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < num_vectors; i++) {
|
|
|
|
msix_vector_unuse(dev, i);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rocker_msix_vectors_use(Rocker *r,
|
|
|
|
unsigned int num_vectors)
|
|
|
|
{
|
|
|
|
PCIDevice *dev = PCI_DEVICE(r);
|
|
|
|
int err;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < num_vectors; i++) {
|
|
|
|
err = msix_vector_use(dev, i);
|
|
|
|
if (err) {
|
|
|
|
goto rollback;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
rollback:
|
|
|
|
rocker_msix_vectors_unuse(r, i);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
static int rocker_msix_init(Rocker *r, Error **errp)
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
{
|
|
|
|
PCIDevice *dev = PCI_DEVICE(r);
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = msix_init(dev, ROCKER_MSIX_VEC_COUNT(r->fp_ports),
|
|
|
|
&r->msix_bar,
|
|
|
|
ROCKER_PCI_MSIX_BAR_IDX, ROCKER_PCI_MSIX_TABLE_OFFSET,
|
|
|
|
&r->msix_bar,
|
|
|
|
ROCKER_PCI_MSIX_BAR_IDX, ROCKER_PCI_MSIX_PBA_OFFSET,
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
0, errp);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
if (err) {
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = rocker_msix_vectors_use(r, ROCKER_MSIX_VEC_COUNT(r->fp_ports));
|
|
|
|
if (err) {
|
|
|
|
goto err_msix_vectors_use;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_msix_vectors_use:
|
|
|
|
msix_uninit(dev, &r->msix_bar, &r->msix_bar);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_msix_uninit(Rocker *r)
|
|
|
|
{
|
|
|
|
PCIDevice *dev = PCI_DEVICE(r);
|
|
|
|
|
|
|
|
msix_uninit(dev, &r->msix_bar, &r->msix_bar);
|
|
|
|
rocker_msix_vectors_unuse(r, ROCKER_MSIX_VEC_COUNT(r->fp_ports));
|
|
|
|
}
|
|
|
|
|
2016-02-25 17:31:58 +03:00
|
|
|
static World *rocker_world_type_by_name(Rocker *r, const char *name)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
|
|
|
|
if (strcmp(name, world_name(r->worlds[i])) == 0) {
|
|
|
|
return r->worlds[i];
|
2018-12-14 01:37:37 +03:00
|
|
|
}
|
2016-02-25 17:31:58 +03:00
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
static void pci_rocker_realize(PCIDevice *dev, Error **errp)
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
{
|
2017-08-14 06:33:10 +03:00
|
|
|
Rocker *r = ROCKER(dev);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
const MACAddr zero = { .a = { 0, 0, 0, 0, 0, 0 } };
|
|
|
|
const MACAddr dflt = { .a = { 0x52, 0x54, 0x00, 0x12, 0x35, 0x01 } };
|
|
|
|
static int sw_index;
|
|
|
|
int i, err = 0;
|
|
|
|
|
|
|
|
/* allocate worlds */
|
|
|
|
|
|
|
|
r->worlds[ROCKER_WORLD_TYPE_OF_DPA] = of_dpa_world_alloc(r);
|
|
|
|
|
2016-02-25 17:31:58 +03:00
|
|
|
if (!r->world_name) {
|
|
|
|
r->world_name = g_strdup(world_name(r->worlds[ROCKER_WORLD_TYPE_OF_DPA]));
|
|
|
|
}
|
|
|
|
|
|
|
|
r->world_dflt = rocker_world_type_by_name(r, r->world_name);
|
|
|
|
if (!r->world_dflt) {
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
error_setg(errp,
|
|
|
|
"invalid argument requested world %s does not exist",
|
2016-02-25 17:31:58 +03:00
|
|
|
r->world_name);
|
|
|
|
goto err_world_type_by_name;
|
|
|
|
}
|
|
|
|
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
/* set up memory-mapped region at BAR0 */
|
|
|
|
|
|
|
|
memory_region_init_io(&r->mmio, OBJECT(r), &rocker_mmio_ops, r,
|
|
|
|
"rocker-mmio", ROCKER_PCI_BAR0_SIZE);
|
|
|
|
pci_register_bar(dev, ROCKER_PCI_BAR0_IDX,
|
|
|
|
PCI_BASE_ADDRESS_SPACE_MEMORY, &r->mmio);
|
|
|
|
|
|
|
|
/* set up memory-mapped region for MSI-X */
|
|
|
|
|
|
|
|
memory_region_init(&r->msix_bar, OBJECT(r), "rocker-msix-bar",
|
|
|
|
ROCKER_PCI_MSIX_BAR_SIZE);
|
|
|
|
pci_register_bar(dev, ROCKER_PCI_MSIX_BAR_IDX,
|
|
|
|
PCI_BASE_ADDRESS_SPACE_MEMORY, &r->msix_bar);
|
|
|
|
|
|
|
|
/* MSI-X init */
|
|
|
|
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
err = rocker_msix_init(r, errp);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
if (err) {
|
|
|
|
goto err_msix_init;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* validate switch properties */
|
|
|
|
|
|
|
|
if (!r->name) {
|
2017-08-14 06:33:10 +03:00
|
|
|
r->name = g_strdup(TYPE_ROCKER);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
if (rocker_find(r->name)) {
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
error_setg(errp, "%s already exists", r->name);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
goto err_duplicate;
|
|
|
|
}
|
|
|
|
|
2015-06-11 04:21:18 +03:00
|
|
|
/* Rocker name is passed in port name requests to OS with the intention
|
|
|
|
* that the name is used in interface names. Limit the length of the
|
|
|
|
* rocker name to avoid naming problems in the OS. Also, adding the
|
|
|
|
* port number as p# and unganged breakout b#, where # is at most 2
|
|
|
|
* digits, so leave room for it too (-1 for string terminator, -3 for
|
|
|
|
* p# and -3 for b#)
|
|
|
|
*/
|
|
|
|
#define ROCKER_IFNAMSIZ 16
|
|
|
|
#define MAX_ROCKER_NAME_LEN (ROCKER_IFNAMSIZ - 1 - 3 - 3)
|
|
|
|
if (strlen(r->name) > MAX_ROCKER_NAME_LEN) {
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
error_setg(errp,
|
|
|
|
"name too long; please shorten to at most %d chars",
|
2015-06-11 04:21:18 +03:00
|
|
|
MAX_ROCKER_NAME_LEN);
|
2017-08-14 06:33:08 +03:00
|
|
|
goto err_name_too_long;
|
2015-06-11 04:21:18 +03:00
|
|
|
}
|
|
|
|
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
if (memcmp(&r->fp_start_macaddr, &zero, sizeof(zero)) == 0) {
|
|
|
|
memcpy(&r->fp_start_macaddr, &dflt, sizeof(dflt));
|
|
|
|
r->fp_start_macaddr.a[4] += (sw_index++);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!r->switch_id) {
|
|
|
|
memcpy(&r->switch_id, &r->fp_start_macaddr,
|
|
|
|
sizeof(r->fp_start_macaddr));
|
|
|
|
}
|
|
|
|
|
|
|
|
if (r->fp_ports > ROCKER_FP_PORTS_MAX) {
|
|
|
|
r->fp_ports = ROCKER_FP_PORTS_MAX;
|
|
|
|
}
|
|
|
|
|
2015-09-14 14:52:23 +03:00
|
|
|
r->rings = g_new(DescRing *, rocker_pci_ring_count(r));
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
|
|
|
|
/* Rings are ordered like this:
|
|
|
|
* - command ring
|
|
|
|
* - event ring
|
|
|
|
* - port0 tx ring
|
|
|
|
* - port0 rx ring
|
|
|
|
* - port1 tx ring
|
|
|
|
* - port1 rx ring
|
|
|
|
* .....
|
|
|
|
*/
|
|
|
|
|
|
|
|
for (i = 0; i < rocker_pci_ring_count(r); i++) {
|
|
|
|
DescRing *ring = desc_ring_alloc(r, i);
|
|
|
|
|
|
|
|
if (i == ROCKER_RING_CMD) {
|
|
|
|
desc_ring_set_consume(ring, cmd_consume, ROCKER_MSIX_VEC_CMD);
|
|
|
|
} else if (i == ROCKER_RING_EVENT) {
|
|
|
|
desc_ring_set_consume(ring, NULL, ROCKER_MSIX_VEC_EVENT);
|
|
|
|
} else if (i % 2 == 0) {
|
|
|
|
desc_ring_set_consume(ring, tx_consume,
|
|
|
|
ROCKER_MSIX_VEC_TX((i - 2) / 2));
|
|
|
|
} else if (i % 2 == 1) {
|
|
|
|
desc_ring_set_consume(ring, NULL, ROCKER_MSIX_VEC_RX((i - 3) / 2));
|
|
|
|
}
|
|
|
|
|
|
|
|
r->rings[i] = ring;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < r->fp_ports; i++) {
|
|
|
|
FpPort *port =
|
|
|
|
fp_port_alloc(r, r->name, &r->fp_start_macaddr,
|
|
|
|
i, &r->fp_ports_peers[i]);
|
|
|
|
|
|
|
|
r->fp_port[i] = port;
|
|
|
|
fp_port_set_world(port, r->world_dflt);
|
|
|
|
}
|
|
|
|
|
|
|
|
QLIST_INSERT_HEAD(&rockers, r, next);
|
|
|
|
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
return;
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
|
2017-08-14 06:33:08 +03:00
|
|
|
err_name_too_long:
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
err_duplicate:
|
|
|
|
rocker_msix_uninit(r);
|
|
|
|
err_msix_init:
|
|
|
|
object_unparent(OBJECT(&r->msix_bar));
|
|
|
|
object_unparent(OBJECT(&r->mmio));
|
2016-02-25 17:31:58 +03:00
|
|
|
err_world_type_by_name:
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
|
|
|
|
if (r->worlds[i]) {
|
|
|
|
world_free(r->worlds[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pci_rocker_uninit(PCIDevice *dev)
|
|
|
|
{
|
2017-08-14 06:33:10 +03:00
|
|
|
Rocker *r = ROCKER(dev);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
int i;
|
|
|
|
|
|
|
|
QLIST_REMOVE(r, next);
|
|
|
|
|
|
|
|
for (i = 0; i < r->fp_ports; i++) {
|
|
|
|
FpPort *port = r->fp_port[i];
|
|
|
|
|
|
|
|
fp_port_free(port);
|
|
|
|
r->fp_port[i] = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < rocker_pci_ring_count(r); i++) {
|
|
|
|
if (r->rings[i]) {
|
|
|
|
desc_ring_free(r->rings[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
g_free(r->rings);
|
|
|
|
|
|
|
|
rocker_msix_uninit(r);
|
|
|
|
object_unparent(OBJECT(&r->msix_bar));
|
|
|
|
object_unparent(OBJECT(&r->mmio));
|
|
|
|
|
|
|
|
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
|
|
|
|
if (r->worlds[i]) {
|
|
|
|
world_free(r->worlds[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
g_free(r->fp_ports_peers);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rocker_reset(DeviceState *dev)
|
|
|
|
{
|
2017-08-14 06:33:10 +03:00
|
|
|
Rocker *r = ROCKER(dev);
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
|
|
|
|
if (r->worlds[i]) {
|
|
|
|
world_reset(r->worlds[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
for (i = 0; i < r->fp_ports; i++) {
|
|
|
|
fp_port_reset(r->fp_port[i]);
|
|
|
|
fp_port_set_world(r->fp_port[i], r->world_dflt);
|
|
|
|
}
|
|
|
|
|
|
|
|
r->test_reg = 0;
|
|
|
|
r->test_reg64 = 0;
|
|
|
|
r->test_dma_addr = 0;
|
|
|
|
r->test_dma_size = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < rocker_pci_ring_count(r); i++) {
|
|
|
|
desc_ring_reset(r->rings[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
DPRINTF("Reset done\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static Property rocker_properties[] = {
|
|
|
|
DEFINE_PROP_STRING("name", Rocker, name),
|
2016-02-25 17:31:58 +03:00
|
|
|
DEFINE_PROP_STRING("world", Rocker, world_name),
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
DEFINE_PROP_MACADDR("fp_start_macaddr", Rocker,
|
|
|
|
fp_start_macaddr),
|
|
|
|
DEFINE_PROP_UINT64("switch_id", Rocker,
|
|
|
|
switch_id, 0),
|
|
|
|
DEFINE_PROP_ARRAY("ports", Rocker, fp_ports,
|
|
|
|
fp_ports_peers, qdev_prop_netdev, NICPeers),
|
|
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
|
|
};
|
|
|
|
|
|
|
|
static const VMStateDescription rocker_vmsd = {
|
2017-08-14 06:33:10 +03:00
|
|
|
.name = TYPE_ROCKER,
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
.unmigratable = 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void rocker_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
|
|
|
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14 06:33:09 +03:00
|
|
|
k->realize = pci_rocker_realize;
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
k->exit = pci_rocker_uninit;
|
|
|
|
k->vendor_id = PCI_VENDOR_ID_REDHAT;
|
|
|
|
k->device_id = PCI_DEVICE_ID_REDHAT_ROCKER;
|
|
|
|
k->revision = ROCKER_PCI_REVISION;
|
|
|
|
k->class_id = PCI_CLASS_NETWORK_OTHER;
|
|
|
|
set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
|
|
|
|
dc->desc = "Rocker Switch";
|
|
|
|
dc->reset = rocker_reset;
|
|
|
|
dc->props = rocker_properties;
|
|
|
|
dc->vmsd = &rocker_vmsd;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const TypeInfo rocker_info = {
|
2017-08-14 06:33:10 +03:00
|
|
|
.name = TYPE_ROCKER,
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
.parent = TYPE_PCI_DEVICE,
|
|
|
|
.instance_size = sizeof(Rocker),
|
|
|
|
.class_init = rocker_class_init,
|
2017-09-27 22:56:34 +03:00
|
|
|
.interfaces = (InterfaceInfo[]) {
|
|
|
|
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
|
|
|
|
{ },
|
|
|
|
},
|
rocker: add new rocker switch device
Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
static void rocker_register_types(void)
|
|
|
|
{
|
|
|
|
type_register_static(&rocker_info);
|
|
|
|
}
|
|
|
|
|
|
|
|
type_init(rocker_register_types)
|