mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
69fbfff95e
qemu/tests/qemu-iotests/051.pc.out

554 lines
26 KiB
Plaintext
Raw Normal View History

qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QA output created by 051
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
iotests: Specify explicit backing format where sensible There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-06 23:39:52 +03:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Unknown option ===
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Unknown protocol option ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt'
=== Invalid format ===
Testing: -drive file=TEST_DIR/t.qcow2,format=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format'
block: Don't silently truncate node names If the user passes a too long node name string, we silently truncate it to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart from surprising the user when the node has a different name than requested, this also bypasses the check for duplicate names, so that the same name can be assigned to multiple nodes. Fix this by just making too long node names an error. Reported-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-04 14:28:29 +03:00
=== Node names ===
Testing: -drive file=TEST_DIR/t.qcow2,node-name=x123456789012345678901234567890
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901: Node name too long
Testing: -drive file=TEST_DIR/t.qcow2,node-name=All-Types.of_all0wed_chars
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,node-name=123foo
block: Clarify error messages pertaining to 'node-name' Some error messages contain ambiguous representations of the 'node-name' parameter. This can be particularly confusing when exchanging QMP messages (C = client, S = server): C: {"execute": "block_resize", "arguments": { "device": "my_file", "size": 26843545600 }} S: {"error": {"class": "GenericError", "desc": "Cannot find device=my_file nor node_name="}} ^^^^^^^^^ This error message suggests one could send a message with a key called 'node_name': C: {"execute": "block_resize", "arguments": { "node_name": "my_file", "size": 26843545600 }} ^^^^^^^^^ but using the underscore is actually incorrect, the parameter should be 'node-name': S: {"error": {"class": "GenericError", "desc": "Parameter 'node_name' is unexpected"}} This behavior was uncovered in bz1651437, but I ended up going down a rabbit hole looking for other areas where this miscommunication might occur and changing those accordingly as well. Fixes: https://bugzilla.redhat.com/1651437 Signed-off-by: Connor Kuehl <ckuehl@redhat.com> Message-Id: <20210305151929.1947331-2-ckuehl@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-05 18:19:28 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=123foo: Invalid node-name: '123foo'
block: Don't silently truncate node names If the user passes a too long node name string, we silently truncate it to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart from surprising the user when the node has a different name than requested, this also bypasses the check for duplicate names, so that the same name can be assigned to multiple nodes. Fix this by just making too long node names an error. Reported-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-04 14:28:29 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,node-name=_foo
block: Clarify error messages pertaining to 'node-name' Some error messages contain ambiguous representations of the 'node-name' parameter. This can be particularly confusing when exchanging QMP messages (C = client, S = server): C: {"execute": "block_resize", "arguments": { "device": "my_file", "size": 26843545600 }} S: {"error": {"class": "GenericError", "desc": "Cannot find device=my_file nor node_name="}} ^^^^^^^^^ This error message suggests one could send a message with a key called 'node_name': C: {"execute": "block_resize", "arguments": { "node_name": "my_file", "size": 26843545600 }} ^^^^^^^^^ but using the underscore is actually incorrect, the parameter should be 'node-name': S: {"error": {"class": "GenericError", "desc": "Parameter 'node_name' is unexpected"}} This behavior was uncovered in bz1651437, but I ended up going down a rabbit hole looking for other areas where this miscommunication might occur and changing those accordingly as well. Fixes: https://bugzilla.redhat.com/1651437 Signed-off-by: Connor Kuehl <ckuehl@redhat.com> Message-Id: <20210305151929.1947331-2-ckuehl@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-05 18:19:28 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=_foo: Invalid node-name: '_foo'
block: Don't silently truncate node names If the user passes a too long node name string, we silently truncate it to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart from surprising the user when the node has a different name than requested, this also bypasses the check for duplicate names, so that the same name can be assigned to multiple nodes. Fix this by just making too long node names an error. Reported-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-04 14:28:29 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,node-name=foo#12
block: Clarify error messages pertaining to 'node-name' Some error messages contain ambiguous representations of the 'node-name' parameter. This can be particularly confusing when exchanging QMP messages (C = client, S = server): C: {"execute": "block_resize", "arguments": { "device": "my_file", "size": 26843545600 }} S: {"error": {"class": "GenericError", "desc": "Cannot find device=my_file nor node_name="}} ^^^^^^^^^ This error message suggests one could send a message with a key called 'node_name': C: {"execute": "block_resize", "arguments": { "node_name": "my_file", "size": 26843545600 }} ^^^^^^^^^ but using the underscore is actually incorrect, the parameter should be 'node-name': S: {"error": {"class": "GenericError", "desc": "Parameter 'node_name' is unexpected"}} This behavior was uncovered in bz1651437, but I ended up going down a rabbit hole looking for other areas where this miscommunication might occur and changing those accordingly as well. Fixes: https://bugzilla.redhat.com/1651437 Signed-off-by: Connor Kuehl <ckuehl@redhat.com> Message-Id: <20210305151929.1947331-2-ckuehl@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-05 18:19:28 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=foo#12: Invalid node-name: 'foo#12'
block: Don't silently truncate node names If the user passes a too long node name string, we silently truncate it to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart from surprising the user when the node has a different name than requested, this also bypasses the check for duplicate names, so that the same name can be assigned to multiple nodes. Fix this by just making too long node names an error. Reported-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-04 14:28:29 +03:00
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Device without drive ===
iotests: Revert "iotests: use -ccw on s390x for 040, 139, and 182" Commit f1d5516ab583 introduces a test in some iotests to check if the machine is a s390-ccw-virtio and to select virtio-*-ccw rather than virtio-*-pci. We don't need that because QEMU already provides aliases to use the correct virtio interface according to the machine type. This patch removes all virtio-*-pci and virtio-*-ccw to use virtio-* instead and remove get_virtio_scsi_device(). This also enables virtio-mmio devices (virtio-*-device) Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20210319202335.2397060-5-laurent@vivier.eu> Message-Id: <20210323165308.15244-20-alex.bennee@linaro.org>
2021-03-23 19:53:05 +03:00
Testing: -device virtio-scsi -device scsi-hd
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd: drive property not set
=== Overriding backing file ===
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block
block: Respect backing bs in bdrv_refresh_filename Basically, bdrv_refresh_filename() should respect all children of a BlockDriverState. However, generally those children are driver-specific, so this function cannot handle the general case. On the other hand, there are only few drivers which use other children than @file and @backing (that being vmdk, quorum, and blkverify). Most block drivers only use @file and/or @backing (if they use any children at all). Both can be implemented directly in bdrv_refresh_filename. The user overriding the file's filename is already handled, however, the user overriding the backing file is not. If this is done, opening the BDS with the plain filename of its file will not be correct, so we may not set bs->exact_filename in that case. iotest 051 contains test cases for overriding the backing file, and so its output changes with this patch applied. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-6-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-01 22:29:09 +03:00
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.orig"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
iotests: Fix 051 for compat=0.10 051 has both compat=1.1 and compat=0.10 tests (once it uses lazy_refcounts, once it tests that setting them does not work). For the compat=0.10 tests, it already explicitly creates a suitable image. So let's just ignore the user-specified compat level for the lazy_refcounts test and explicitly create a compat=1.1 image there, too. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20171123020832.8165-12-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-11-23 05:08:26 +03:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off'
=== With version 2 images enabling lazy refcounts must fail ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== No medium ===
Testing: -drive if=floppy
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive if=ide,media=cdrom
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive if=ide
QEMU X.Y.Z monitor - type 'help' for more information
iotests: Fix 051 output after qdev_init_nofail() removal Commit 96927c744 replaced qdev_init_nofail() call by isa_realize_and_unref() which has a different error message. Update the test output accordingly. Gitlab CI error after merging b77b5b3dc7: https://gitlab.com/qemu-project/qemu/-/jobs/597414772#L4375 Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200616154949.6586-1-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-06-16 18:49:49 +03:00
(qemu) QEMU_PROG: Device needs media, but drive is empty
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive if=none,id=disk -device ide-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive if=none,id=disk -device ide-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty
iotests: Attach new devices to node in non-default iothread This tests that devices refuse to be attached to a node that has already been moved to a different iothread if they can't be or aren't configured to work in the same iothread. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-23 17:09:19 +03:00
=== Attach to node in non-default iothread ===
Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device ide-hd,drive=disk,share-rw=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk,share-rw=on: Cannot change iothread of active block backend
Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-blk-pci,drive=disk,share-rw=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device virtio-blk-pci,drive=disk,share-rw=on: Cannot change iothread of active block backend
Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device lsi53c895a,id=lsi0 -device scsi-hd,bus=lsi0.0,drive=disk,share-rw=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd,bus=lsi0.0,drive=disk,share-rw=on: HBA does not support iothreads
Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-scsi,id=virtio-scsi1 -device scsi-hd,bus=virtio-scsi1.0,drive=disk,share-rw=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd,bus=virtio-scsi1.0,drive=disk,share-rw=on: Cannot change iothread of active block backend
iotests/051: Fix typo The iothread isn't called 'iothread0', but 'thread0'. Depending on the order that properties are parsed, the error message may change from the expected one to another one saying that the iothread doesn't exist. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211008133442.141332-7-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-08 16:34:33 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-blk-pci,drive=disk,iothread=thread0,share-rw=on
iotests: Attach new devices to node in non-default iothread This tests that devices refuse to be attached to a node that has already been moved to a different iothread if they can't be or aren't configured to work in the same iothread. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-23 17:09:19 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
iotests/051: Fix typo The iothread isn't called 'iothread0', but 'thread0'. Depending on the order that properties are parsed, the error message may change from the expected one to another one saying that the iothread doesn't exist. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211008133442.141332-7-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-08 16:34:33 +03:00
(qemu) QEMU_PROG: -device virtio-blk-pci,drive=disk,iothread=thread0,share-rw=on: Cannot change iothread of active block backend
iotests: Attach new devices to node in non-default iothread This tests that devices refuse to be attached to a node that has already been moved to a different iothread if they can't be or aren't configured to work in the same iothread. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-23 17:09:19 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-scsi,id=virtio-scsi1,iothread=thread0 -device scsi-hd,bus=virtio-scsi1.0,drive=disk,share-rw=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Read-only ===
Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
iotests: Fix 051 output after qdev_init_nofail() removal Commit 96927c744 replaced qdev_init_nofail() call by isa_realize_and_unref() which has a different error message. Update the test output accordingly. Gitlab CI error after merging b77b5b3dc7: https://gitlab.com/qemu-project/qemu/-/jobs/597414772#L4375 Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200616154949.6586-1-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-06-16 18:49:49 +03:00
(qemu) QEMU_PROG: Block node is read-only
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
hw/block: Request permissions This makes all device emulations with a qdev drive property request permissions on their BlockBackend. The only thing we block at this point is resizing images for some devices that can't support it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-01-24 15:43:31 +03:00
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Block node is read-only
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Cache modes ===
iotests: Set read-zeroes on in null block driver for Valgrind The Valgrind tool reports about the uninitialised buffer 'buf' instantiated on the stack of the function guess_disk_lchs(). Pass 'read-zeroes=on' to the null block driver to make it deterministic. The output of the tests 051, 186 and 227 now includes the parameter 'read-zeroes'. So, the benchmark output files are being changed too. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-15 19:07:59 +03:00
Testing: -drive driver=null-co,read-zeroes=on,cache=none
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
iotests: Set read-zeroes on in null block driver for Valgrind The Valgrind tool reports about the uninitialised buffer 'buf' instantiated on the stack of the function guess_disk_lchs(). Pass 'read-zeroes=on' to the null block driver to make it deterministic. The output of the tests 051, 186 and 227 now includes the parameter 'read-zeroes'. So, the benchmark output files are being changed too. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-15 19:07:59 +03:00
Testing: -drive driver=null-co,read-zeroes=on,cache=directsync
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
iotests: Set read-zeroes on in null block driver for Valgrind The Valgrind tool reports about the uninitialised buffer 'buf' instantiated on the stack of the function guess_disk_lchs(). Pass 'read-zeroes=on' to the null block driver to make it deterministic. The output of the tests 051, 186 and 227 now includes the parameter 'read-zeroes'. So, the benchmark output files are being changed too. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-15 19:07:59 +03:00
Testing: -drive driver=null-co,read-zeroes=on,cache=writeback
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
iotests: Set read-zeroes on in null block driver for Valgrind The Valgrind tool reports about the uninitialised buffer 'buf' instantiated on the stack of the function guess_disk_lchs(). Pass 'read-zeroes=on' to the null block driver to make it deterministic. The output of the tests 051, 186 and 227 now includes the parameter 'read-zeroes'. So, the benchmark output files are being changed too. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-15 19:07:59 +03:00
Testing: -drive driver=null-co,read-zeroes=on,cache=writethrough
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
iotests: Set read-zeroes on in null block driver for Valgrind The Valgrind tool reports about the uninitialised buffer 'buf' instantiated on the stack of the function guess_disk_lchs(). Pass 'read-zeroes=on' to the null block driver to make it deterministic. The output of the tests 051, 186 and 227 now includes the parameter 'read-zeroes'. So, the benchmark output files are being changed too. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-15 19:07:59 +03:00
Testing: -drive driver=null-co,read-zeroes=on,cache=unsafe
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive driver=null-co,cache=invalid_value
QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block
block: Respect backing bs in bdrv_refresh_filename Basically, bdrv_refresh_filename() should respect all children of a BlockDriverState. However, generally those children are driver-specific, so this function cannot handle the general case. On the other hand, there are only few drivers which use other children than @file and @backing (that being vmdk, quorum, and blkverify). Most block drivers only use @file and/or @backing (if they use any children at all). Both can be implemented directly in bdrv_refresh_filename. The user overriding the file's filename is already handled, however, the user overriding the backing file is not. If this is done, opening the BDS with the plain filename of its file will not be correct, so we may not set bs->exact_filename in that case. iotest 051 contains test cases for overriding the backing file, and so its output changes with this patch applied. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-6-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-01 22:29:09 +03:00
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block file
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block backing
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block backing-file
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block
block: Respect backing bs in bdrv_refresh_filename Basically, bdrv_refresh_filename() should respect all children of a BlockDriverState. However, generally those children are driver-specific, so this function cannot handle the general case. On the other hand, there are only few drivers which use other children than @file and @backing (that being vmdk, quorum, and blkverify). Most block drivers only use @file and/or @backing (if they use any children at all). Both can be implemented directly in bdrv_refresh_filename. The user overriding the file's filename is already handled, however, the user overriding the backing file is not. If this is done, opening the BDS with the plain filename of its file will not be correct, so we may not set bs->exact_filename in that case. iotest 051 contains test cases for overriding the backing file, and so its output changes with this patch applied. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-6-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-01 22:29:09 +03:00
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writethrough
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block file
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block backing
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block backing-file
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block
block: Respect backing bs in bdrv_refresh_filename Basically, bdrv_refresh_filename() should respect all children of a BlockDriverState. However, generally those children are driver-specific, so this function cannot handle the general case. On the other hand, there are only few drivers which use other children than @file and @backing (that being vmdk, quorum, and blkverify). Most block drivers only use @file and/or @backing (if they use any children at all). Both can be implemented directly in bdrv_refresh_filename. The user overriding the file's filename is already handled, however, the user overriding the backing file is not. If this is done, opening the BDS with the plain filename of its file will not be correct, so we may not set bs->exact_filename in that case. iotest 051 contains test cases for overriding the backing file, and so its output changes with this patch applied. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-6-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-01 22:29:09 +03:00
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block file
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback, ignore flushes
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block backing
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) info block backing-file
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Specifying the protocol layer ===
Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Leaving out required options ===
Testing: -drive driver=file
QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name
iotests/051: Add test for empty filename Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-04-13 19:06:25 +03:00
Testing: -drive driver=file,filename=
QEMU_PROG: -drive driver=file,filename=: The 'file' block driver requires a file name
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive driver=nbd
block/nbd: Accept SocketAddress Add a new option "server" to the NBD block driver which accepts a SocketAddress. "path", "host" and "port" are still supported as legacy options and are mapped to their corresponding SocketAddress representation. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-25 16:11:34 +03:00
QEMU_PROG: -drive driver=nbd: NBD server address missing
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive driver=raw
block: Attach bs->file only during .bdrv_open() The way that attaching bs->file worked was a bit unusual in that it was the only child that would be attached to a node which is not opened yet. Because of this, the block layer couldn't know yet which permissions the driver would eventually need. This patch moves the point where bs->file is attached to the beginning of the individual .bdrv_open() implementations, so drivers already know what they are going to do with the child. This is also more consistent with how driver-specific children work. For a moment, bdrv_open() gets its own BdrvChild to perform image probing, but instead of directly assigning this BdrvChild to the BDS, it becomes a temporary one and the node name is passed as an option to the drivers, so that they can simply use bdrv_open_child() to create another reference for their own use. This duplicated child for (the not opened yet) bs is not the final state, a follow-up patch will change the image probing code to use a BlockBackend, which is completely independent of bs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-12-16 20:52:37 +03:00
QEMU_PROG: -drive driver=raw: A block device must be specified for "file"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file.driver=file
QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name
Testing: -drive file.driver=nbd
block/nbd: Accept SocketAddress Add a new option "server" to the NBD block driver which accepts a SocketAddress. "path", "host" and "port" are still supported as legacy options and are mapped to their corresponding SocketAddress representation. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-25 16:11:34 +03:00
QEMU_PROG: -drive file.driver=nbd: NBD server address missing
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file.driver=raw
block: Attach bs->file only during .bdrv_open() The way that attaching bs->file worked was a bit unusual in that it was the only child that would be attached to a node which is not opened yet. Because of this, the block layer couldn't know yet which permissions the driver would eventually need. This patch moves the point where bs->file is attached to the beginning of the individual .bdrv_open() implementations, so drivers already know what they are going to do with the child. This is also more consistent with how driver-specific children work. For a moment, bdrv_open() gets its own BdrvChild to perform image probing, but instead of directly assigning this BdrvChild to the BDS, it becomes a temporary one and the node name is passed as an option to the drivers, so that they can simply use bdrv_open_child() to create another reference for their own use. This duplicated child for (the not opened yet) bs is not the final state, a follow-up patch will change the image probing code to use a BlockBackend, which is completely independent of bs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-12-16 20:52:37 +03:00
QEMU_PROG: -drive file.driver=raw: A block device must be specified for "file"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive foo=bar
QEMU_PROG: -drive foo=bar: Must specify either driver or file
=== Specifying both an option and its legacy alias ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time
iotests: Test that throttle values ranges Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20 07:21:21 +03:00
=== Catching negative/large throttling values ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=-1
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=-2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=0
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
iotests: Test that throttle values ranges Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20 07:21:21 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,bps=1
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
iotests: Test that throttle values ranges Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20 07:21:21 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
iotests: Test that throttle values ranges Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20 07:21:21 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000]
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Parsing protocol from file name ===
Testing: -hda foo:bar
QEMU_PROG: -hda foo:bar: Unknown protocol 'foo'
Testing: -drive file=foo:bar
QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
Testing: -drive file.filename=foo:bar
QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
Testing: -hda file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file.filename=file:TEST_DIR/t.qcow2
QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
=== Snapshot mode ===
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) qemu-io drive0 "write -P 0x33 0 4k"
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Filter HMP readline escape characters The only thing the escape characters achieve is making the reference output unreadable and lines that are potentially so long that git doesn't want to put them into an email any more. Let's filter them out. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-13 20:19:51 +03:00
(qemu) commit drive0
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: Test snapshot=on with nonexistent TMPDIR We just fixed a bug that was causing a use-after-free when QEMU was unable to create a temporary snapshot. This is a test case for this scenario. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-09-10 12:29:23 +03:00
Testing: -drive driver=null-co,snapshot=on
block: Refactor get_tmp_filename() At present there are two callers of get_tmp_filename() and they are inconsistent. One does: /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */ char *tmp_filename = g_malloc0(PATH_MAX + 1); ... ret = get_tmp_filename(tmp_filename, PATH_MAX + 1); while the other does: s->qcow_filename = g_malloc(PATH_MAX); ret = get_tmp_filename(s->qcow_filename, PATH_MAX); As we can see different 'size' arguments are passed. There are also platform specific implementations inside the function, and the use of snprintf is really undesirable. The function name is also misleading. It creates a temporary file, not just a filename. Refactor this routine by changing its name and signature to: char *create_tmp_file(Error **errp) and use g_get_tmp_dir() / g_mkstemp() for a consistent implementation. While we are here, add some comments to mention that /var/tmp is preferred over /tmp on non-win32 hosts. Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20221010040432.3380478-2-bin.meng@windriver.com> [kwolf: Fixed incorrect errno negation and iotest 051] Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-10-10 07:04:31 +03:00
QEMU_PROG: -drive driver=null-co,snapshot=on: Could not open temporary file SNAPSHOT_PATH: No such file or directory
qemu-iotests: Test snapshot=on with nonexistent TMPDIR We just fixed a bug that was causing a use-after-free when QEMU was unable to create a temporary snapshot. This is a test case for this scenario. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-09-10 12:29:23 +03:00
file-posix: Fix bdrv_open_flags() for snapshot=on Using a different read-only setting for bs->open_flags than for the flags to the driver's open function is just inconsistent and a bad idea. After this patch, the temporary snapshot keeps being opened read-only if read-only=on,snapshot=on is passed. If we wanted to change this behaviour to make only the orginal image file read-only, but the temporary overlay read-write (as the comment in the removed code suggests), that change would have to be made in bdrv_temp_snapshot_options() (where the comment suggests otherwise). Addressing this inconsistency before introducing dynamic auto-read-only is important because otherwise we would immediately try to reopen the temporary overlay even though the file is already unlinked. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-11 18:13:16 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,read-only=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) info block
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}}, "driver": "qcow2", "file": {"driver": "file", "filename": SNAPSHOT_PATH}} (qcow2, read-only)
Removable device: not locked, tray closed
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2 (chain depth: 1)
(qemu) quit
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
*** done
Reference in New Issue Copy Permalink