qemu/include/block/block.h

626 lines
26 KiB
C
Raw Normal View History

#ifndef BLOCK_H
#define BLOCK_H
#include "block/aio.h"
#include "qemu/iov.h"
#include "qemu/option.h"
#include "qemu/coroutine.h"
#include "block/accounting.h"
#include "block/dirty-bitmap.h"
#include "block/blockjob.h"
#include "qapi/qmp/qobject.h"
#include "qapi-types.h"
#include "qemu/hbitmap.h"
/* block.c */
typedef struct BlockDriver BlockDriver;
typedef struct BdrvChild BdrvChild;
typedef struct BdrvChildRole BdrvChildRole;
typedef struct BlockDriverInfo {
/* in bytes, 0 if irrelevant */
int cluster_size;
/* offset at which the VM state can be saved (0 if not possible) */
int64_t vm_state_offset;
bool is_dirty;
/*
* True if unallocated blocks read back as zeroes. This is equivalent
* to the LBPRZ flag in the SCSI logical block provisioning page.
*/
bool unallocated_blocks_are_zero;
/*
* True if the driver can optimize writing zeroes by unmapping
* sectors. This is equivalent to the BLKDISCARDZEROES ioctl in Linux
* with the difference that in qemu a discard is allowed to silently
* fail. Therefore we have to use bdrv_pwrite_zeroes with the
* BDRV_REQ_MAY_UNMAP flag for an optimized zero write with unmapping.
* After this call the driver has to guarantee that the contents read
* back as zero. It is additionally required that the block device is
* opened with BDRV_O_UNMAP flag for this to work.
*/
bool can_write_zeroes_with_unmap;
/*
* True if this block driver only supports compressed writes
*/
bool needs_compressed_writes;
} BlockDriverInfo;
typedef struct BlockFragInfo {
uint64_t allocated_clusters;
uint64_t total_clusters;
uint64_t fragmented_clusters;
uint64_t compressed_clusters;
} BlockFragInfo;
typedef enum {
BDRV_REQ_COPY_ON_READ = 0x1,
BDRV_REQ_ZERO_WRITE = 0x2,
/* The BDRV_REQ_MAY_UNMAP flag is used to indicate that the block driver
* is allowed to optimize a write zeroes request by unmapping (discarding)
* blocks if it is guaranteed that the result will read back as
* zeroes. The flag is only passed to the driver if the block device is
* opened with BDRV_O_UNMAP.
*/
BDRV_REQ_MAY_UNMAP = 0x4,
BDRV_REQ_NO_SERIALISING = 0x8,
BDRV_REQ_FUA = 0x10,
BDRV_REQ_WRITE_COMPRESSED = 0x20,
/* Mask of valid flags */
BDRV_REQ_MASK = 0x3f,
} BdrvRequestFlags;
typedef struct BlockSizes {
uint32_t phys;
uint32_t log;
} BlockSizes;
typedef struct HDGeometry {
uint32_t heads;
uint32_t sectors;
uint32_t cylinders;
} HDGeometry;
#define BDRV_O_RDWR 0x0002
#define BDRV_O_RESIZE 0x0004 /* request permission for resizing the node */
#define BDRV_O_SNAPSHOT 0x0008 /* open the file read only and save writes in a snapshot */
#define BDRV_O_TEMPORARY 0x0010 /* delete the file after use */
#define BDRV_O_NOCACHE 0x0020 /* do not use the host page cache */
#define BDRV_O_NATIVE_AIO 0x0080 /* use native AIO instead of the thread pool */
#define BDRV_O_NO_BACKING 0x0100 /* don't open the backing file */
#define BDRV_O_NO_FLUSH 0x0200 /* disable flushing on this disk */
#define BDRV_O_COPY_ON_READ 0x0400 /* copy read backing sectors into image */
#define BDRV_O_INACTIVE 0x0800 /* consistency hint for migration handoff */
#define BDRV_O_CHECK 0x1000 /* open solely for consistency check */
#define BDRV_O_ALLOW_RDWR 0x2000 /* allow reopen to change from r/o to r/w */
#define BDRV_O_UNMAP 0x4000 /* execute guest UNMAP/TRIM operations */
#define BDRV_O_PROTOCOL 0x8000 /* if no block driver is explicitly given:
select an appropriate protocol driver,
ignoring the format layer */
#define BDRV_O_NO_IO 0x10000 /* don't initialize for I/O */
#define BDRV_O_CACHE_MASK (BDRV_O_NOCACHE | BDRV_O_NO_FLUSH)
/* Option names of options parsed by the block layer */
#define BDRV_OPT_CACHE_WB "cache.writeback"
#define BDRV_OPT_CACHE_DIRECT "cache.direct"
#define BDRV_OPT_CACHE_NO_FLUSH "cache.no-flush"
#define BDRV_OPT_READ_ONLY "read-only"
#define BDRV_OPT_DISCARD "discard"
#define BDRV_SECTOR_BITS 9
#define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS)
#define BDRV_SECTOR_MASK ~(BDRV_SECTOR_SIZE - 1)
#define BDRV_REQUEST_MAX_SECTORS MIN(SIZE_MAX >> BDRV_SECTOR_BITS, \
INT_MAX >> BDRV_SECTOR_BITS)
#define BDRV_REQUEST_MAX_BYTES (BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS)
/*
* Allocation status flags
* BDRV_BLOCK_DATA: data is read from a file returned by bdrv_get_block_status.
* BDRV_BLOCK_ZERO: sectors read as zero
* BDRV_BLOCK_OFFSET_VALID: sector stored as raw data in a file returned by
* bdrv_get_block_status.
* BDRV_BLOCK_ALLOCATED: the content of the block is determined by this
* layer (as opposed to the backing file)
* BDRV_BLOCK_RAW: used internally to indicate that the request
* was answered by the raw driver and that one
* should look in bs->file directly.
*
* If BDRV_BLOCK_OFFSET_VALID is set, bits 9-62 represent the offset in
* bs->file where sector data can be read from as raw data.
*
* DATA == 0 && ZERO == 0 means that data is read from backing_hd if present.
*
* DATA ZERO OFFSET_VALID
* t t t sectors read as zero, bs->file is zero at offset
* t f t sectors read as valid from bs->file at offset
* f t t sectors preallocated, read as zero, bs->file not
* necessarily zero at offset
* f f t sectors preallocated but read from backing_hd,
* bs->file contains garbage at offset
* t t f sectors preallocated, read as zero, unknown offset
* t f f sectors read from unknown file or offset
* f t f not allocated or unknown offset, read as zero
* f f f not allocated or unknown offset, read from backing_hd
*/
#define BDRV_BLOCK_DATA 0x01
#define BDRV_BLOCK_ZERO 0x02
#define BDRV_BLOCK_OFFSET_VALID 0x04
#define BDRV_BLOCK_RAW 0x08
#define BDRV_BLOCK_ALLOCATED 0x10
#define BDRV_BLOCK_OFFSET_MASK BDRV_SECTOR_MASK
typedef QSIMPLEQ_HEAD(BlockReopenQueue, BlockReopenQueueEntry) BlockReopenQueue;
typedef struct BDRVReopenState {
BlockDriverState *bs;
int flags;
QDict *options;
QDict *explicit_options;
void *opaque;
} BDRVReopenState;
/*
* Block operation types
*/
typedef enum BlockOpType {
BLOCK_OP_TYPE_BACKUP_SOURCE,
BLOCK_OP_TYPE_BACKUP_TARGET,
BLOCK_OP_TYPE_CHANGE,
BLOCK_OP_TYPE_COMMIT_SOURCE,
BLOCK_OP_TYPE_COMMIT_TARGET,
BLOCK_OP_TYPE_DATAPLANE,
BLOCK_OP_TYPE_DRIVE_DEL,
BLOCK_OP_TYPE_EJECT,
BLOCK_OP_TYPE_EXTERNAL_SNAPSHOT,
BLOCK_OP_TYPE_INTERNAL_SNAPSHOT,
BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETE,
BLOCK_OP_TYPE_MIRROR_SOURCE,
BLOCK_OP_TYPE_MIRROR_TARGET,
BLOCK_OP_TYPE_RESIZE,
BLOCK_OP_TYPE_STREAM,
BLOCK_OP_TYPE_REPLACE,
BLOCK_OP_TYPE_MAX,
} BlockOpType;
/* Block node permission constants */
enum {
/**
* A user that has the "permission" of consistent reads is guaranteed that
* their view of the contents of the block device is complete and
* self-consistent, representing the contents of a disk at a specific
* point.
*
* For most block devices (including their backing files) this is true, but
* the property cannot be maintained in a few situations like for
* intermediate nodes of a commit block job.
*/
BLK_PERM_CONSISTENT_READ = 0x01,
/** This permission is required to change the visible disk contents. */
BLK_PERM_WRITE = 0x02,
/**
* This permission (which is weaker than BLK_PERM_WRITE) is both enough and
* required for writes to the block node when the caller promises that
* the visible disk content doesn't change.
*/
BLK_PERM_WRITE_UNCHANGED = 0x04,
/** This permission is required to change the size of a block node. */
BLK_PERM_RESIZE = 0x08,
/**
* This permission is required to change the node that this BdrvChild
* points to.
*/
BLK_PERM_GRAPH_MOD = 0x10,
BLK_PERM_ALL = 0x1f,
};
/* disk I/O throttling */
void bdrv_init(void);
void bdrv_init_with_whitelist(void);
2016-03-21 17:11:48 +03:00
bool bdrv_uses_whitelist(void);
BlockDriver *bdrv_find_protocol(const char *filename,
bool allow_protocol_prefix,
Error **errp);
BlockDriver *bdrv_find_format(const char *format_name);
int bdrv_create(BlockDriver *drv, const char* filename,
QemuOpts *opts, Error **errp);
int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp);
BlockDriverState *bdrv_new(void);
void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top,
Error **errp);
void bdrv_replace_node(BlockDriverState *from, BlockDriverState *to,
Error **errp);
int bdrv_parse_cache_mode(const char *mode, int *flags, bool *writethrough);
int bdrv_parse_discard_flags(const char *mode, int *flags);
BdrvChild *bdrv_open_child(const char *filename,
QDict *options, const char *bdref_key,
BlockDriverState* parent,
const BdrvChildRole *child_role,
bool allow_none, Error **errp);
void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd,
Error **errp);
int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
const char *bdref_key, Error **errp);
BlockDriverState *bdrv_open(const char *filename, const char *reference,
QDict *options, int flags, Error **errp);
BlockDriverState *bdrv_new_open_driver(BlockDriver *drv, const char *node_name,
int flags, Error **errp);
BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
BlockDriverState *bs,
QDict *options, int flags);
int bdrv_reopen_multiple(AioContext *ctx, BlockReopenQueue *bs_queue, Error **errp);
int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp);
int bdrv_reopen_prepare(BDRVReopenState *reopen_state,
BlockReopenQueue *queue, Error **errp);
void bdrv_reopen_commit(BDRVReopenState *reopen_state);
void bdrv_reopen_abort(BDRVReopenState *reopen_state);
int bdrv_read(BdrvChild *child, int64_t sector_num,
uint8_t *buf, int nb_sectors);
int bdrv_write(BdrvChild *child, int64_t sector_num,
const uint8_t *buf, int nb_sectors);
int bdrv_pwrite_zeroes(BdrvChild *child, int64_t offset,
int count, BdrvRequestFlags flags);
int bdrv_make_zero(BdrvChild *child, BdrvRequestFlags flags);
int bdrv_pread(BdrvChild *child, int64_t offset, void *buf, int bytes);
int bdrv_preadv(BdrvChild *child, int64_t offset, QEMUIOVector *qiov);
int bdrv_pwrite(BdrvChild *child, int64_t offset, const void *buf, int bytes);
int bdrv_pwritev(BdrvChild *child, int64_t offset, QEMUIOVector *qiov);
int bdrv_pwrite_sync(BdrvChild *child, int64_t offset,
const void *buf, int count);
int coroutine_fn bdrv_co_readv(BdrvChild *child, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov);
int coroutine_fn bdrv_co_writev(BdrvChild *child, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov);
/*
* Efficiently zero a region of the disk image. Note that this is a regular
* I/O request like read or write and should have a reasonable size. This
* function is not suitable for zeroing the entire image in a single request
* because it may allocate memory for the entire region.
*/
int coroutine_fn bdrv_co_pwrite_zeroes(BdrvChild *child, int64_t offset,
int count, BdrvRequestFlags flags);
BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
const char *backing_file);
int bdrv_get_backing_file_depth(BlockDriverState *bs);
void bdrv_refresh_filename(BlockDriverState *bs);
int bdrv_truncate(BdrvChild *child, int64_t offset);
int64_t bdrv_nb_sectors(BlockDriverState *bs);
int64_t bdrv_getlength(BlockDriverState *bs);
int64_t bdrv_get_allocated_file_size(BlockDriverState *bs);
void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr);
void bdrv_refresh_limits(BlockDriverState *bs, Error **errp);
int bdrv_commit(BlockDriverState *bs);
int bdrv_change_backing_file(BlockDriverState *bs,
const char *backing_file, const char *backing_fmt);
void bdrv_register(BlockDriver *bdrv);
int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
BlockDriverState *base,
const char *backing_file_str);
BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
BlockDriverState *bs);
BlockDriverState *bdrv_find_base(BlockDriverState *bs);
typedef struct BdrvCheckResult {
int corruptions;
int leaks;
int check_errors;
int corruptions_fixed;
int leaks_fixed;
int64_t image_end_offset;
BlockFragInfo bfi;
} BdrvCheckResult;
typedef enum {
BDRV_FIX_LEAKS = 1,
BDRV_FIX_ERRORS = 2,
} BdrvCheckMode;
int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix);
/* The units of offset and total_work_size may be chosen arbitrarily by the
* block driver; total_work_size may change during the course of the amendment
* operation */
typedef void BlockDriverAmendStatusCB(BlockDriverState *bs, int64_t offset,
int64_t total_work_size, void *opaque);
int bdrv_amend_options(BlockDriverState *bs_new, QemuOpts *opts,
BlockDriverAmendStatusCB *status_cb, void *cb_opaque);
/* external snapshots */
bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
BlockDriverState *candidate);
bool bdrv_is_first_non_filter(BlockDriverState *candidate);
/* check if a named node can be replaced when doing drive-mirror */
BlockDriverState *check_to_replace_node(BlockDriverState *parent_bs,
const char *node_name, Error **errp);
/* async block I/O */
BlockAIOCB *bdrv_aio_readv(BdrvChild *child, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque);
BlockAIOCB *bdrv_aio_writev(BdrvChild *child, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque);
BlockAIOCB *bdrv_aio_flush(BlockDriverState *bs,
BlockCompletionFunc *cb, void *opaque);
void bdrv_aio_cancel(BlockAIOCB *acb);
void bdrv_aio_cancel_async(BlockAIOCB *acb);
/* sg packet commands */
int bdrv_co_ioctl(BlockDriverState *bs, int req, void *buf);
/* Invalidate any cached metadata used by image formats */
void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp);
void bdrv_invalidate_cache_all(Error **errp);
block: Inactivate BDS when migration completes So far, live migration with shared storage meant that the image is in a not-really-ready don't-touch-me state on the destination while the source is still actively using it, but after completing the migration, the image was fully opened on both sides. This is bad. This patch adds a block driver callback to inactivate images on the source before completing the migration. Inactivation means that it goes to a state as if it was just live migrated to the qemu instance on the source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue either on the source or on the destination, which takes ownership of the image. A typical migration looks like this now with respect to disk images: 1. Destination qemu is started, the image is opened with BDRV_O_INACTIVE. The image is fully opened on the source. 2. Migration is about to complete. The source flushes the image and inactivates it. Now both sides have the image opened with BDRV_O_INACTIVE and are expecting the other side to still modify it. 3. One side (the destination on success) continues and calls bdrv_invalidate_all() in order to take ownership of the image again. This removes BDRV_O_INACTIVE on the resuming side; the flag remains set on the other side. This ensures that the same image isn't written to by both instances (unless both are resumed, but then you get what you deserve). This is important because .bdrv_close for non-BDRV_O_INACTIVE images could write to the image file, which is definitely forbidden while another host is using the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2015-12-22 16:07:08 +03:00
int bdrv_inactivate_all(void);
void blk_resume_after_migration(Error **errp);
/* Ensure contents are flushed to disk. */
int bdrv_flush(BlockDriverState *bs);
int coroutine_fn bdrv_co_flush(BlockDriverState *bs);
int bdrv_flush_all(void);
void bdrv_close_all(void);
void bdrv_drain(BlockDriverState *bs);
block: Fix bdrv_drain in coroutine Using the nested aio_poll() in coroutine is a bad idea. This patch replaces the aio_poll loop in bdrv_drain with a BH, if called in coroutine. For example, the bdrv_drain() in mirror.c can hang when a guest issued request is pending on it in qemu_co_mutex_lock(). Mirror coroutine in this case has just finished a request, and the block job is about to complete. It calls bdrv_drain() which waits for the other coroutine to complete. The other coroutine is a scsi-disk request. The deadlock happens when the latter is in turn pending on the former to yield/terminate, in qemu_co_mutex_lock(). The state flow is as below (assuming a qcow2 image): mirror coroutine scsi-disk coroutine ------------------------------------------------------------- do last write qcow2:qemu_co_mutex_lock() ... scsi disk read tracked request begin qcow2:qemu_co_mutex_lock.enter qcow2:qemu_co_mutex_unlock() bdrv_drain while (has tracked request) aio_poll() In the scsi-disk coroutine, the qemu_co_mutex_lock() will never return because the mirror coroutine is blocked in the aio_poll(blocking=true). With this patch, the added qemu_coroutine_yield() allows the scsi-disk coroutine to make progress as expected: mirror coroutine scsi-disk coroutine ------------------------------------------------------------- do last write qcow2:qemu_co_mutex_lock() ... scsi disk read tracked request begin qcow2:qemu_co_mutex_lock.enter qcow2:qemu_co_mutex_unlock() bdrv_drain.enter > schedule BH > qemu_coroutine_yield() > qcow2:qemu_co_mutex_lock.return > ... tracked request end ... (resumed from BH callback) bdrv_drain.return ... Reported-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1459855253-5378-2-git-send-email-famz@redhat.com Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-04-05 14:20:52 +03:00
void coroutine_fn bdrv_co_drain(BlockDriverState *bs);
void bdrv_drain_all_begin(void);
void bdrv_drain_all_end(void);
void bdrv_drain_all(void);
#define BDRV_POLL_WHILE(bs, cond) ({ \
bool waited_ = false; \
block: Drain BH in bdrv_drained_begin During block job completion, nothing is preventing block_job_defer_to_main_loop_bh from being called in a nested aio_poll(), which is a trouble, such as in this code path: qmp_block_commit commit_active_start bdrv_reopen bdrv_reopen_multiple bdrv_reopen_prepare bdrv_flush aio_poll aio_bh_poll aio_bh_call block_job_defer_to_main_loop_bh stream_complete bdrv_reopen block_job_defer_to_main_loop_bh is the last step of the stream job, which should have been "paused" by the bdrv_drained_begin/end in bdrv_reopen_multiple, but it is not done because it's in the form of a main loop BH. Similar to why block jobs should be paused between drained_begin and drained_end, BHs they schedule must be excluded as well. To achieve this, this patch forces draining the BH in BDRV_POLL_WHILE. As a side effect this fixes a hang in block_job_detach_aio_context during system_reset when a block job is ready: #0 0x0000555555aa79f3 in bdrv_drain_recurse #1 0x0000555555aa825d in bdrv_drained_begin #2 0x0000555555aa8449 in bdrv_drain #3 0x0000555555a9c356 in blk_drain #4 0x0000555555aa3cfd in mirror_drain #5 0x0000555555a66e11 in block_job_detach_aio_context #6 0x0000555555a62f4d in bdrv_detach_aio_context #7 0x0000555555a63116 in bdrv_set_aio_context #8 0x0000555555a9d326 in blk_set_aio_context #9 0x00005555557e38da in virtio_blk_data_plane_stop #10 0x00005555559f9d5f in virtio_bus_stop_ioeventfd #11 0x00005555559fa49b in virtio_bus_stop_ioeventfd #12 0x00005555559f6a18 in virtio_pci_stop_ioeventfd #13 0x00005555559f6a18 in virtio_pci_reset #14 0x00005555559139a9 in qdev_reset_one #15 0x0000555555916738 in qbus_walk_children #16 0x0000555555913318 in qdev_walk_children #17 0x0000555555916738 in qbus_walk_children #18 0x00005555559168ca in qemu_devices_reset #19 0x000055555581fcbb in pc_machine_reset #20 0x00005555558a4d96 in qemu_system_reset #21 0x000055555577157a in main_loop_should_exit #22 0x000055555577157a in main_loop #23 0x000055555577157a in main The rationale is that the loop in block_job_detach_aio_context cannot make any progress in pausing/completing the job, because bs->in_flight is 0, so bdrv_drain doesn't process the block_job_defer_to_main_loop BH. With this patch, it does. Reported-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170418143044.12187-3-famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Tested-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-04-18 17:30:44 +03:00
bool busy_ = true; \
BlockDriverState *bs_ = (bs); \
AioContext *ctx_ = bdrv_get_aio_context(bs_); \
if (aio_context_in_iothread(ctx_)) { \
block: Drain BH in bdrv_drained_begin During block job completion, nothing is preventing block_job_defer_to_main_loop_bh from being called in a nested aio_poll(), which is a trouble, such as in this code path: qmp_block_commit commit_active_start bdrv_reopen bdrv_reopen_multiple bdrv_reopen_prepare bdrv_flush aio_poll aio_bh_poll aio_bh_call block_job_defer_to_main_loop_bh stream_complete bdrv_reopen block_job_defer_to_main_loop_bh is the last step of the stream job, which should have been "paused" by the bdrv_drained_begin/end in bdrv_reopen_multiple, but it is not done because it's in the form of a main loop BH. Similar to why block jobs should be paused between drained_begin and drained_end, BHs they schedule must be excluded as well. To achieve this, this patch forces draining the BH in BDRV_POLL_WHILE. As a side effect this fixes a hang in block_job_detach_aio_context during system_reset when a block job is ready: #0 0x0000555555aa79f3 in bdrv_drain_recurse #1 0x0000555555aa825d in bdrv_drained_begin #2 0x0000555555aa8449 in bdrv_drain #3 0x0000555555a9c356 in blk_drain #4 0x0000555555aa3cfd in mirror_drain #5 0x0000555555a66e11 in block_job_detach_aio_context #6 0x0000555555a62f4d in bdrv_detach_aio_context #7 0x0000555555a63116 in bdrv_set_aio_context #8 0x0000555555a9d326 in blk_set_aio_context #9 0x00005555557e38da in virtio_blk_data_plane_stop #10 0x00005555559f9d5f in virtio_bus_stop_ioeventfd #11 0x00005555559fa49b in virtio_bus_stop_ioeventfd #12 0x00005555559f6a18 in virtio_pci_stop_ioeventfd #13 0x00005555559f6a18 in virtio_pci_reset #14 0x00005555559139a9 in qdev_reset_one #15 0x0000555555916738 in qbus_walk_children #16 0x0000555555913318 in qdev_walk_children #17 0x0000555555916738 in qbus_walk_children #18 0x00005555559168ca in qemu_devices_reset #19 0x000055555581fcbb in pc_machine_reset #20 0x00005555558a4d96 in qemu_system_reset #21 0x000055555577157a in main_loop_should_exit #22 0x000055555577157a in main_loop #23 0x000055555577157a in main The rationale is that the loop in block_job_detach_aio_context cannot make any progress in pausing/completing the job, because bs->in_flight is 0, so bdrv_drain doesn't process the block_job_defer_to_main_loop BH. With this patch, it does. Reported-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170418143044.12187-3-famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Tested-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-04-18 17:30:44 +03:00
while ((cond) || busy_) { \
busy_ = aio_poll(ctx_, (cond)); \
waited_ |= !!(cond) | busy_; \
} \
} else { \
assert(qemu_get_current_aio_context() == \
qemu_get_aio_context()); \
/* Ask bdrv_dec_in_flight to wake up the main \
* QEMU AioContext. Extra I/O threads never take \
* other I/O threads' AioContexts (see for example \
* block_job_defer_to_main_loop for how to do it). \
*/ \
assert(!bs_->wakeup); \
bs_->wakeup = true; \
block: Drain BH in bdrv_drained_begin During block job completion, nothing is preventing block_job_defer_to_main_loop_bh from being called in a nested aio_poll(), which is a trouble, such as in this code path: qmp_block_commit commit_active_start bdrv_reopen bdrv_reopen_multiple bdrv_reopen_prepare bdrv_flush aio_poll aio_bh_poll aio_bh_call block_job_defer_to_main_loop_bh stream_complete bdrv_reopen block_job_defer_to_main_loop_bh is the last step of the stream job, which should have been "paused" by the bdrv_drained_begin/end in bdrv_reopen_multiple, but it is not done because it's in the form of a main loop BH. Similar to why block jobs should be paused between drained_begin and drained_end, BHs they schedule must be excluded as well. To achieve this, this patch forces draining the BH in BDRV_POLL_WHILE. As a side effect this fixes a hang in block_job_detach_aio_context during system_reset when a block job is ready: #0 0x0000555555aa79f3 in bdrv_drain_recurse #1 0x0000555555aa825d in bdrv_drained_begin #2 0x0000555555aa8449 in bdrv_drain #3 0x0000555555a9c356 in blk_drain #4 0x0000555555aa3cfd in mirror_drain #5 0x0000555555a66e11 in block_job_detach_aio_context #6 0x0000555555a62f4d in bdrv_detach_aio_context #7 0x0000555555a63116 in bdrv_set_aio_context #8 0x0000555555a9d326 in blk_set_aio_context #9 0x00005555557e38da in virtio_blk_data_plane_stop #10 0x00005555559f9d5f in virtio_bus_stop_ioeventfd #11 0x00005555559fa49b in virtio_bus_stop_ioeventfd #12 0x00005555559f6a18 in virtio_pci_stop_ioeventfd #13 0x00005555559f6a18 in virtio_pci_reset #14 0x00005555559139a9 in qdev_reset_one #15 0x0000555555916738 in qbus_walk_children #16 0x0000555555913318 in qdev_walk_children #17 0x0000555555916738 in qbus_walk_children #18 0x00005555559168ca in qemu_devices_reset #19 0x000055555581fcbb in pc_machine_reset #20 0x00005555558a4d96 in qemu_system_reset #21 0x000055555577157a in main_loop_should_exit #22 0x000055555577157a in main_loop #23 0x000055555577157a in main The rationale is that the loop in block_job_detach_aio_context cannot make any progress in pausing/completing the job, because bs->in_flight is 0, so bdrv_drain doesn't process the block_job_defer_to_main_loop BH. With this patch, it does. Reported-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170418143044.12187-3-famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Tested-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-04-18 17:30:44 +03:00
while (busy_) { \
if ((cond)) { \
waited_ = busy_ = true; \
aio_context_release(ctx_); \
aio_poll(qemu_get_aio_context(), true); \
aio_context_acquire(ctx_); \
} else { \
busy_ = aio_poll(ctx_, false); \
waited_ |= busy_; \
} \
} \
bs_->wakeup = false; \
} \
waited_; })
int bdrv_pdiscard(BlockDriverState *bs, int64_t offset, int count);
int bdrv_co_pdiscard(BlockDriverState *bs, int64_t offset, int count);
int bdrv_has_zero_init_1(BlockDriverState *bs);
int bdrv_has_zero_init(BlockDriverState *bs);
bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs);
bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);
int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, int *pnum,
BlockDriverState **file);
int64_t bdrv_get_block_status_above(BlockDriverState *bs,
BlockDriverState *base,
int64_t sector_num,
int nb_sectors, int *pnum,
BlockDriverState **file);
int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
int *pnum);
int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
int64_t sector_num, int nb_sectors, int *pnum);
bool bdrv_is_read_only(BlockDriverState *bs);
bool bdrv_is_sg(BlockDriverState *bs);
bool bdrv_is_inserted(BlockDriverState *bs);
int bdrv_media_changed(BlockDriverState *bs);
void bdrv_lock_medium(BlockDriverState *bs, bool locked);
void bdrv_eject(BlockDriverState *bs, bool eject_flag);
const char *bdrv_get_format_name(BlockDriverState *bs);
BlockDriverState *bdrv_find_node(const char *node_name);
BlockDeviceInfoList *bdrv_named_nodes_list(Error **errp);
qmp: Allow to change password on named block driver states. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> There was two candidate ways to implement named node manipulation: 1) { 'command': 'block_passwd', 'data': {'*device': 'str', '*node-name': 'str', 'password': 'str'} } 2) { 'command': 'block_passwd', 'data': {'device': 'str', '*device-is-node': 'bool', 'password': 'str'} } Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to rewrite the QMP block interface for 2.0. Luiz does not like in 1 the fact that 2 fields are optional but one of them must be specified leading to an abuse of the QMP semantic. Kevin argumented that 2 what a clear abuse of the device field and would not be practical when reading fast some log file because the user would read "device" and think that a device is manipulated when it's in fact a node name. Documentation of 1 make it pretty clear what to do for the user. Kevin argued that all bs are node including devices ones so 2 does not make sense. Kevin also argued that rewriting the QMP block interface would not make disapear the current one. Kevin pushed the argument that making the QAPI generator compatible with the semantic of the operation would need a rewrite that no one has done yet. A vote has been done on the list to elect the version to use and 1 won. For reference the complete thread is: "[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver states." Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 00:31:35 +04:00
BlockDriverState *bdrv_lookup_bs(const char *device,
const char *node_name,
Error **errp);
bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base);
BlockDriverState *bdrv_next_node(BlockDriverState *bs);
typedef struct BdrvNextIterator {
enum {
BDRV_NEXT_BACKEND_ROOTS,
BDRV_NEXT_MONITOR_OWNED,
} phase;
BlockBackend *blk;
BlockDriverState *bs;
} BdrvNextIterator;
BlockDriverState *bdrv_first(BdrvNextIterator *it);
BlockDriverState *bdrv_next(BdrvNextIterator *it);
BlockDriverState *bdrv_next_monitor_owned(BlockDriverState *bs);
bool bdrv_is_encrypted(BlockDriverState *bs);
bool bdrv_key_required(BlockDriverState *bs);
int bdrv_set_key(BlockDriverState *bs, const char *key);
void bdrv_add_key(BlockDriverState *bs, const char *key, Error **errp);
void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
void *opaque);
const char *bdrv_get_node_name(const BlockDriverState *bs);
const char *bdrv_get_device_name(const BlockDriverState *bs);
const char *bdrv_get_device_or_node_name(const BlockDriverState *bs);
int bdrv_get_flags(BlockDriverState *bs);
int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi);
ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs);
void bdrv_round_sectors_to_clusters(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
int64_t *cluster_sector_num,
int *cluster_nb_sectors);
void bdrv_round_to_clusters(BlockDriverState *bs,
int64_t offset, unsigned int bytes,
int64_t *cluster_offset,
unsigned int *cluster_bytes);
const char *bdrv_get_encrypted_filename(BlockDriverState *bs);
void bdrv_get_backing_filename(BlockDriverState *bs,
char *filename, int filename_size);
void bdrv_get_full_backing_filename(BlockDriverState *bs,
char *dest, size_t sz, Error **errp);
void bdrv_get_full_backing_filename_from_filename(const char *backed,
const char *backing,
char *dest, size_t sz,
Error **errp);
int path_has_protocol(const char *path);
int path_is_absolute(const char *path);
void path_combine(char *dest, int dest_size,
const char *base_path,
const char *filename);
int bdrv_readv_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
int64_t pos, int size);
int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
int64_t pos, int size);
void bdrv_img_create(const char *filename, const char *fmt,
const char *base_filename, const char *base_fmt,
char *options, uint64_t img_size, int flags,
Error **errp, bool quiet);
/* Returns the alignment in bytes that is required so that no bounce buffer
* is required throughout the stack */
size_t bdrv_min_mem_align(BlockDriverState *bs);
/* Returns optimal alignment in bytes for bounce buffer */
size_t bdrv_opt_mem_align(BlockDriverState *bs);
void *qemu_blockalign(BlockDriverState *bs, size_t size);
void *qemu_blockalign0(BlockDriverState *bs, size_t size);
void *qemu_try_blockalign(BlockDriverState *bs, size_t size);
void *qemu_try_blockalign0(BlockDriverState *bs, size_t size);
bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov);
void bdrv_enable_copy_on_read(BlockDriverState *bs);
void bdrv_disable_copy_on_read(BlockDriverState *bs);
void bdrv_ref(BlockDriverState *bs);
void bdrv_unref(BlockDriverState *bs);
void bdrv_unref_child(BlockDriverState *parent, BdrvChild *child);
BdrvChild *bdrv_attach_child(BlockDriverState *parent_bs,
BlockDriverState *child_bs,
const char *child_name,
const BdrvChildRole *child_role,
Error **errp);
bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp);
void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason);
void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason);
void bdrv_op_block_all(BlockDriverState *bs, Error *reason);
void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason);
bool bdrv_op_blocker_is_empty(BlockDriverState *bs);
#define BLKDBG_EVENT(child, evt) \
do { \
if (child) { \
bdrv_debug_event(child->bs, evt); \
} \
} while (0)
void bdrv_debug_event(BlockDriverState *bs, BlkdebugEvent event);
int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
const char *tag);
int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag);
int bdrv_debug_resume(BlockDriverState *bs, const char *tag);
bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag);
/**
* bdrv_get_aio_context:
*
* Returns: the currently bound #AioContext
*/
AioContext *bdrv_get_aio_context(BlockDriverState *bs);
/**
* Transfer control to @co in the aio context of @bs
*/
void bdrv_coroutine_enter(BlockDriverState *bs, Coroutine *co);
/**
* bdrv_set_aio_context:
*
* Changes the #AioContext used for fd handlers, timers, and BHs by this
* BlockDriverState and all its children.
*
* This function must be called with iothread lock held.
*/
void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context);
int bdrv_probe_blocksizes(BlockDriverState *bs, BlockSizes *bsz);
int bdrv_probe_geometry(BlockDriverState *bs, HDGeometry *geo);
void bdrv_io_plug(BlockDriverState *bs);
void bdrv_io_unplug(BlockDriverState *bs);
/**
* bdrv_parent_drained_begin:
*
* Begin a quiesced section of all users of @bs. This is part of
* bdrv_drained_begin.
*/
void bdrv_parent_drained_begin(BlockDriverState *bs);
/**
* bdrv_parent_drained_end:
*
* End a quiesced section of all users of @bs. This is part of
* bdrv_drained_end.
*/
void bdrv_parent_drained_end(BlockDriverState *bs);
/**
* bdrv_drained_begin:
*
* Begin a quiesced section for exclusive access to the BDS, by disabling
* external request sources including NBD server and device model. Note that
* this doesn't block timers or coroutines from submitting more requests, which
* means block_job_pause is still necessary.
*
* This function can be recursive.
*/
void bdrv_drained_begin(BlockDriverState *bs);
/**
* bdrv_drained_end:
*
* End a quiescent section started by bdrv_drained_begin().
*/
void bdrv_drained_end(BlockDriverState *bs);
void bdrv_add_child(BlockDriverState *parent, BlockDriverState *child,
Error **errp);
void bdrv_del_child(BlockDriverState *parent, BdrvChild *child, Error **errp);
#endif