qemu/hw/nvram/fw_cfg.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1418 lines
42 KiB
C
Raw Normal View History

/*
* QEMU Firmware configuration device emulation
*
* Copyright (c) 2008 Gleb Natapov
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/datadir.h"
#include "sysemu/sysemu.h"
#include "sysemu/dma.h"
#include "sysemu/reset.h"
#include "hw/boards.h"
#include "hw/nvram/fw_cfg.h"
#include "hw/qdev-properties.h"
#include "hw/sysbus.h"
#include "migration/qemu-file-types.h"
#include "migration/vmstate.h"
#include "trace.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
#include "qemu/config-file.h"
#include "qemu/cutils.h"
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
#include "qapi/error.h"
#include "hw/acpi/aml-build.h"
#include "hw/pci/pci_bus.h"
#include "hw/loader.h"
fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine types More precisely, the "x-file-slots" count is bumped for all machine types that: (a) use fw_cfg, and (b) are not versioned (hence migration is not expected to work for them across QEMU releases anyway), or have version 2.9. This affects machine types implemented in the following source files: - "hw/arm/virt.c". The "virt-*" machine type is versioned, and the <= 2.8 versions already depend on HW_COMPAT_2_8 (see commit e353aac51b944). Therefore adding the "x-file-slots" compat values to HW_COMPAT_2_8 suffices. - "hw/i386/pc.c". The "pc-i440fx-*" (including "pc-*") and "pc-q35-*" machine types are versioned. Modifying HW_COMPAT_2_8 is sufficient here too (see commit "pc: Add 2.9 machine-types"). The "isapc" machtype is not versioned. The "xenfv" machine type, which uses fw_cfg for direct kernel booting, is also not versioned. - "hw/ppc/mac_newworld.c". The "mac99" machine type is not versioned. - "hw/ppc/mac_oldworld.c". The "g3beige" machine type is not versioned. - "hw/sparc/sun4m.c". None of the 9 machine types defined in this file appear versioned. - "hw/sparc64/sun4u.c". None of the 3 machine types defined in this file appear versioned. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:17 +03:00
#define FW_CFG_FILE_SLOTS_DFLT 0x20
/* FW_CFG_VERSION bits */
#define FW_CFG_VERSION 0x01
#define FW_CFG_VERSION_DMA 0x02
/* FW_CFG_DMA_CONTROL bits */
#define FW_CFG_DMA_CTL_ERROR 0x01
#define FW_CFG_DMA_CTL_READ 0x02
#define FW_CFG_DMA_CTL_SKIP 0x04
#define FW_CFG_DMA_CTL_SELECT 0x08
2017-01-12 21:24:14 +03:00
#define FW_CFG_DMA_CTL_WRITE 0x10
#define FW_CFG_DMA_SIGNATURE 0x51454d5520434647ULL /* "QEMU CFG" */
struct FWCfgEntry {
uint32_t len;
2017-01-12 21:24:14 +03:00
bool allow_write;
uint8_t *data;
void *callback_opaque;
FWCfgCallback select_cb;
FWCfgWriteCallback write_cb;
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
};
/**
* key_name:
*
* @key: The uint16 selector key.
*
* Returns: The stringified name if the selector refers to a well-known
* numerically defined item, or NULL on key lookup failure.
*/
static const char *key_name(uint16_t key)
{
static const char *fw_cfg_wellknown_keys[FW_CFG_FILE_FIRST] = {
[FW_CFG_SIGNATURE] = "signature",
[FW_CFG_ID] = "id",
[FW_CFG_UUID] = "uuid",
[FW_CFG_RAM_SIZE] = "ram_size",
[FW_CFG_NOGRAPHIC] = "nographic",
[FW_CFG_NB_CPUS] = "nb_cpus",
[FW_CFG_MACHINE_ID] = "machine_id",
[FW_CFG_KERNEL_ADDR] = "kernel_addr",
[FW_CFG_KERNEL_SIZE] = "kernel_size",
[FW_CFG_KERNEL_CMDLINE] = "kernel_cmdline",
[FW_CFG_INITRD_ADDR] = "initrd_addr",
[FW_CFG_INITRD_SIZE] = "initdr_size",
[FW_CFG_BOOT_DEVICE] = "boot_device",
[FW_CFG_NUMA] = "numa",
[FW_CFG_BOOT_MENU] = "boot_menu",
[FW_CFG_MAX_CPUS] = "max_cpus",
[FW_CFG_KERNEL_ENTRY] = "kernel_entry",
[FW_CFG_KERNEL_DATA] = "kernel_data",
[FW_CFG_INITRD_DATA] = "initrd_data",
[FW_CFG_CMDLINE_ADDR] = "cmdline_addr",
[FW_CFG_CMDLINE_SIZE] = "cmdline_size",
[FW_CFG_CMDLINE_DATA] = "cmdline_data",
[FW_CFG_SETUP_ADDR] = "setup_addr",
[FW_CFG_SETUP_SIZE] = "setup_size",
[FW_CFG_SETUP_DATA] = "setup_data",
[FW_CFG_FILE_DIR] = "file_dir",
};
if (key & FW_CFG_ARCH_LOCAL) {
return fw_cfg_arch_key_name(key);
}
if (key < FW_CFG_FILE_FIRST) {
return fw_cfg_wellknown_keys[key];
}
return NULL;
}
static inline const char *trace_key_name(uint16_t key)
{
const char *name = key_name(key);
return name ? name : "unknown";
}
#define JPG_FILE 0
#define BMP_FILE 1
static char *read_splashfile(char *filename, gsize *file_sizep,
int *file_typep)
{
GError *err = NULL;
gchar *content;
int file_type;
unsigned int filehead;
int bmp_bpp;
if (!g_file_get_contents(filename, &content, file_sizep, &err)) {
error_report("failed to read splash file '%s': %s",
filename, err->message);
g_error_free(err);
return NULL;
}
/* check file size */
if (*file_sizep < 30) {
goto error;
}
/* check magic ID */
filehead = lduw_le_p(content);
if (filehead == 0xd8ff) {
file_type = JPG_FILE;
} else if (filehead == 0x4d42) {
file_type = BMP_FILE;
} else {
goto error;
}
/* check BMP bpp */
if (file_type == BMP_FILE) {
bmp_bpp = lduw_le_p(&content[28]);
if (bmp_bpp != 24) {
goto error;
}
}
/* return values */
*file_typep = file_type;
return content;
error:
error_report("splash file '%s' format not recognized; must be JPEG "
"or 24 bit BMP", filename);
g_free(content);
return NULL;
}
static void fw_cfg_bootsplash(FWCfgState *s)
{
char *filename, *file_data;
gsize file_size;
int file_type;
/* insert splash time if user configurated */
if (current_machine->boot_config.has_splash_time) {
int64_t bst_val = current_machine->boot_config.splash_time;
uint16_t bst_le16;
/* validate the input */
if (bst_val < 0 || bst_val > 0xffff) {
error_report("splash-time is invalid,"
"it should be a value between 0 and 65535");
exit(1);
}
/* use little endian format */
bst_le16 = cpu_to_le16(bst_val);
fw_cfg_add_file(s, "etc/boot-menu-wait",
g_memdup(&bst_le16, sizeof bst_le16), sizeof bst_le16);
}
/* insert splash file if user configurated */
if (current_machine->boot_config.splash) {
const char *boot_splash_filename = current_machine->boot_config.splash;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, boot_splash_filename);
if (filename == NULL) {
error_report("failed to find file '%s'", boot_splash_filename);
return;
}
/* loading file data */
file_data = read_splashfile(filename, &file_size, &file_type);
if (file_data == NULL) {
g_free(filename);
return;
}
g_free(boot_splash_filedata);
boot_splash_filedata = (uint8_t *)file_data;
/* insert data */
if (file_type == JPG_FILE) {
fw_cfg_add_file(s, "bootsplash.jpg",
boot_splash_filedata, file_size);
} else {
fw_cfg_add_file(s, "bootsplash.bmp",
boot_splash_filedata, file_size);
}
g_free(filename);
}
}
static void fw_cfg_reboot(FWCfgState *s)
{
uint64_t rt_val = -1;
uint32_t rt_le32;
if (current_machine->boot_config.has_reboot_timeout) {
rt_val = current_machine->boot_config.reboot_timeout;
/* validate the input */
if (rt_val > 0xffff && rt_val != (uint64_t)-1) {
error_report("reboot timeout is invalid,"
"it should be a value between -1 and 65535");
exit(1);
}
}
rt_le32 = cpu_to_le32(rt_val);
fw_cfg_add_file(s, "etc/boot-fail-wait", g_memdup(&rt_le32, 4), 4);
}
static void fw_cfg_write(FWCfgState *s, uint8_t value)
{
/* nothing, write support removed in QEMU v2.4+ */
}
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
static inline uint16_t fw_cfg_file_slots(const FWCfgState *s)
{
return s->file_slots;
}
/* Note: this function returns an exclusive limit. */
static inline uint32_t fw_cfg_max_entry(const FWCfgState *s)
{
return FW_CFG_FILE_FIRST + fw_cfg_file_slots(s);
}
static int fw_cfg_select(FWCfgState *s, uint16_t key)
{
fw_cfg: amend callback behavior spec to once per select Currently, the fw_cfg internal API specifies that if an item was set up with a read callback, the callback must be run each time a byte is read from the item. This behavior is both wasteful (most items do not have a read callback set), and impractical for bulk transfers (e.g., DMA read). At the time of this writing, the only items configured with a callback are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They all share the same callback functions: virt_acpi_build_update() on ARM (in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return without doing anything at all after the first time they are invoked with a given build_state; since build_state is also shared across all three items mentioned above, the callback only ever runs *once*, the first time either of the listed items is read). This patch amends the specification for fw_cfg_add_file_callback() to state that any available read callback will only be invoked once each time the item is selected. This change has no practical effect on the current behavior of QEMU, and it enables us to significantly optimize the behavior of fw_cfg reads during guest firmware setup, eliminating a large amount of redundant callback checks and invocations. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-05 17:32:48 +03:00
int arch, ret;
FWCfgEntry *e;
s->cur_offset = 0;
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
if ((key & FW_CFG_ENTRY_MASK) >= fw_cfg_max_entry(s)) {
s->cur_entry = FW_CFG_INVALID;
ret = 0;
} else {
s->cur_entry = key;
ret = 1;
fw_cfg: amend callback behavior spec to once per select Currently, the fw_cfg internal API specifies that if an item was set up with a read callback, the callback must be run each time a byte is read from the item. This behavior is both wasteful (most items do not have a read callback set), and impractical for bulk transfers (e.g., DMA read). At the time of this writing, the only items configured with a callback are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They all share the same callback functions: virt_acpi_build_update() on ARM (in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return without doing anything at all after the first time they are invoked with a given build_state; since build_state is also shared across all three items mentioned above, the callback only ever runs *once*, the first time either of the listed items is read). This patch amends the specification for fw_cfg_add_file_callback() to state that any available read callback will only be invoked once each time the item is selected. This change has no practical effect on the current behavior of QEMU, and it enables us to significantly optimize the behavior of fw_cfg reads during guest firmware setup, eliminating a large amount of redundant callback checks and invocations. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-05 17:32:48 +03:00
/* entry successfully selected, now run callback if present */
arch = !!(key & FW_CFG_ARCH_LOCAL);
e = &s->entries[arch][key & FW_CFG_ENTRY_MASK];
if (e->select_cb) {
e->select_cb(e->callback_opaque);
fw_cfg: amend callback behavior spec to once per select Currently, the fw_cfg internal API specifies that if an item was set up with a read callback, the callback must be run each time a byte is read from the item. This behavior is both wasteful (most items do not have a read callback set), and impractical for bulk transfers (e.g., DMA read). At the time of this writing, the only items configured with a callback are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They all share the same callback functions: virt_acpi_build_update() on ARM (in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return without doing anything at all after the first time they are invoked with a given build_state; since build_state is also shared across all three items mentioned above, the callback only ever runs *once*, the first time either of the listed items is read). This patch amends the specification for fw_cfg_add_file_callback() to state that any available read callback will only be invoked once each time the item is selected. This change has no practical effect on the current behavior of QEMU, and it enables us to significantly optimize the behavior of fw_cfg reads during guest firmware setup, eliminating a large amount of redundant callback checks and invocations. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-05 17:32:48 +03:00
}
}
trace_fw_cfg_select(s, key, trace_key_name(key), ret);
return ret;
}
static uint64_t fw_cfg_data_read(void *opaque, hwaddr addr, unsigned size)
{
FWCfgState *s = opaque;
int arch = !!(s->cur_entry & FW_CFG_ARCH_LOCAL);
FWCfgEntry *e = (s->cur_entry == FW_CFG_INVALID) ? NULL :
&s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
uint64_t value = 0;
assert(size > 0 && size <= sizeof(value));
if (s->cur_entry != FW_CFG_INVALID && e->data && s->cur_offset < e->len) {
/* The least significant 'size' bytes of the return value are
* expected to contain a string preserving portion of the item
* data, padded with zeros on the right in case we run out early.
* In technical terms, we're composing the host-endian representation
* of the big endian interpretation of the fw_cfg string.
*/
do {
value = (value << 8) | e->data[s->cur_offset++];
} while (--size && s->cur_offset < e->len);
/* If size is still not zero, we *did* run out early, so continue
* left-shifting, to add the appropriate number of padding zeros
* on the right.
*/
value <<= 8 * size;
}
trace_fw_cfg_read(s, value);
return value;
}
static void fw_cfg_data_mem_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
FWCfgState *s = opaque;
fw_cfg: fix endianness in fw_cfg_data_mem_read() / _write() (1) Let's contemplate what device endianness means, for a memory mapped device register (independently of QEMU -- that is, on physical hardware). It determines the byte order that the device will put on the data bus when the device is producing a *numerical value* for the CPU. This byte order may differ from the CPU's own byte order, therefore when software wants to consume the *numerical value*, it may have to swap the byte order first. For example, suppose we have a device that exposes in a 2-byte register the number of sheep we have to count before falling asleep. If the value is decimal 37 (0x0025), then a big endian register will produce [0x00, 0x25], while a little endian register will produce [0x25, 0x00]. If the device register is big endian, but the CPU is little endian, the numerical value will read as 0x2500 (decimal 9472), which software has to byte swap before use. However... if we ask the device about who stole our herd of sheep, and it answers "XY", then the byte representation coming out of the register must be [0x58, 0x59], regardless of the device register's endianness for numeric values. And, software needs to copy these bytes into a string field regardless of the CPU's own endianness. (2) QEMU's device register accessor functions work with *numerical values* exclusively, not strings: The emulated register's read accessor function returns the numerical value (eg. 37 decimal, 0x0025) as a *host-encoded* uint64_t. QEMU translates this value for the guest to the endianness of the emulated device register (which is recorded in MemoryRegionOps.endianness). Then guest code must translate the numerical value from device register to guest CPU endianness, before including it in any computation (see (1)). (3) However, the data register of the fw_cfg device shall transfer strings *only* -- that is, opaque blobs. Interpretation of any given blob is subject to further agreement -- it can be an integer in an independently determined byte order, or a genuine string, or an array of structs of integers (in some byte order) and fixed size strings, and so on. Because register emulation in QEMU is integer-preserving, not string-preserving (see (2)), we have to jump through a few hoops. (3a) We defined the memory mapped fw_cfg data register as DEVICE_BIG_ENDIAN. The particular choice is not really relevant -- we picked BE only for consistency with the control register, which *does* transfer integers -- but our choice affects how we must host-encode values from fw_cfg strings. (3b) Since we want the fw_cfg string "XY" to appear as the [0x58, 0x59] array on the data register, *and* we picked DEVICE_BIG_ENDIAN, we must compose the host (== C language) value 0x5859 in the read accessor function. (3c) When the guest performs the read access, the immediate uint16_t value will be 0x5958 (in LE guests) and 0x5859 (in BE guests). However, the uint16_t value does not matter. The only thing that matters is the byte pattern [0x58, 0x59], which the guest code must copy into the target string *without* any byte-swapping. (4) Now I get to explain where I screwed up. :( When we decided for big endian *integer* representation in the MMIO data register -- see (3a) --, I mindlessly added an indiscriminate byte-swizzling step to the (little endian) guest firmware. This was a grave error -- it violates (3c) --, but I didn't realize it. I only saw that the code I otherwise intended for fw_cfg_data_mem_read(): value = 0; for (i = 0; i < size; ++i) { value = (value << 8) | fw_cfg_read(s); } didn't produce the expected result in the guest. In true facepalm style, instead of blaming my guest code (which violated (3c)), I blamed my host code (which was correct). Ultimately, I coded ldX_he_p() into fw_cfg_data_mem_read(), because that happened to work. Obviously (...in retrospect) that was wrong. Only because my host happened to be LE, ldX_he_p() composed the (otherwise incorrect) host value 0x5958 from the fw_cfg string "XY". And that happened to compensate for the bogus indiscriminate byte-swizzling in my guest code. Clearly the current code leaks the host endianness through to the guest, which is wrong. Any device should work the same regardless of host endianness. The solution is to compose the host-endian representation (2) of the big endian interpretation (3a, 3b) of the fw_cfg string, and to drop the wrong byte-swizzling in the guest (3c). Brown paper bag time for me. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1420024880-15416-1-git-send-email-lersek@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-16 14:54:30 +03:00
unsigned i = size;
fw_cfg: fix endianness in fw_cfg_data_mem_read() / _write() (1) Let's contemplate what device endianness means, for a memory mapped device register (independently of QEMU -- that is, on physical hardware). It determines the byte order that the device will put on the data bus when the device is producing a *numerical value* for the CPU. This byte order may differ from the CPU's own byte order, therefore when software wants to consume the *numerical value*, it may have to swap the byte order first. For example, suppose we have a device that exposes in a 2-byte register the number of sheep we have to count before falling asleep. If the value is decimal 37 (0x0025), then a big endian register will produce [0x00, 0x25], while a little endian register will produce [0x25, 0x00]. If the device register is big endian, but the CPU is little endian, the numerical value will read as 0x2500 (decimal 9472), which software has to byte swap before use. However... if we ask the device about who stole our herd of sheep, and it answers "XY", then the byte representation coming out of the register must be [0x58, 0x59], regardless of the device register's endianness for numeric values. And, software needs to copy these bytes into a string field regardless of the CPU's own endianness. (2) QEMU's device register accessor functions work with *numerical values* exclusively, not strings: The emulated register's read accessor function returns the numerical value (eg. 37 decimal, 0x0025) as a *host-encoded* uint64_t. QEMU translates this value for the guest to the endianness of the emulated device register (which is recorded in MemoryRegionOps.endianness). Then guest code must translate the numerical value from device register to guest CPU endianness, before including it in any computation (see (1)). (3) However, the data register of the fw_cfg device shall transfer strings *only* -- that is, opaque blobs. Interpretation of any given blob is subject to further agreement -- it can be an integer in an independently determined byte order, or a genuine string, or an array of structs of integers (in some byte order) and fixed size strings, and so on. Because register emulation in QEMU is integer-preserving, not string-preserving (see (2)), we have to jump through a few hoops. (3a) We defined the memory mapped fw_cfg data register as DEVICE_BIG_ENDIAN. The particular choice is not really relevant -- we picked BE only for consistency with the control register, which *does* transfer integers -- but our choice affects how we must host-encode values from fw_cfg strings. (3b) Since we want the fw_cfg string "XY" to appear as the [0x58, 0x59] array on the data register, *and* we picked DEVICE_BIG_ENDIAN, we must compose the host (== C language) value 0x5859 in the read accessor function. (3c) When the guest performs the read access, the immediate uint16_t value will be 0x5958 (in LE guests) and 0x5859 (in BE guests). However, the uint16_t value does not matter. The only thing that matters is the byte pattern [0x58, 0x59], which the guest code must copy into the target string *without* any byte-swapping. (4) Now I get to explain where I screwed up. :( When we decided for big endian *integer* representation in the MMIO data register -- see (3a) --, I mindlessly added an indiscriminate byte-swizzling step to the (little endian) guest firmware. This was a grave error -- it violates (3c) --, but I didn't realize it. I only saw that the code I otherwise intended for fw_cfg_data_mem_read(): value = 0; for (i = 0; i < size; ++i) { value = (value << 8) | fw_cfg_read(s); } didn't produce the expected result in the guest. In true facepalm style, instead of blaming my guest code (which violated (3c)), I blamed my host code (which was correct). Ultimately, I coded ldX_he_p() into fw_cfg_data_mem_read(), because that happened to work. Obviously (...in retrospect) that was wrong. Only because my host happened to be LE, ldX_he_p() composed the (otherwise incorrect) host value 0x5958 from the fw_cfg string "XY". And that happened to compensate for the bogus indiscriminate byte-swizzling in my guest code. Clearly the current code leaks the host endianness through to the guest, which is wrong. Any device should work the same regardless of host endianness. The solution is to compose the host-endian representation (2) of the big endian interpretation (3a, 3b) of the fw_cfg string, and to drop the wrong byte-swizzling in the guest (3c). Brown paper bag time for me. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1420024880-15416-1-git-send-email-lersek@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-16 14:54:30 +03:00
do {
fw_cfg_write(s, value >> (8 * --i));
} while (i);
}
static void fw_cfg_dma_transfer(FWCfgState *s)
{
dma_addr_t len;
FWCfgDmaAccess dma;
int arch;
FWCfgEntry *e;
2017-01-12 21:24:14 +03:00
int read = 0, write = 0;
dma_addr_t dma_addr;
/* Reset the address before the next access */
dma_addr = s->dma_addr;
s->dma_addr = 0;
if (dma_memory_read(s->dma_as, dma_addr,
&dma, sizeof(dma), MEMTXATTRS_UNSPECIFIED)) {
stl_be_dma(s->dma_as, dma_addr + offsetof(FWCfgDmaAccess, control),
FW_CFG_DMA_CTL_ERROR, MEMTXATTRS_UNSPECIFIED);
return;
}
dma.address = be64_to_cpu(dma.address);
dma.length = be32_to_cpu(dma.length);
dma.control = be32_to_cpu(dma.control);
if (dma.control & FW_CFG_DMA_CTL_SELECT) {
fw_cfg_select(s, dma.control >> 16);
}
arch = !!(s->cur_entry & FW_CFG_ARCH_LOCAL);
e = (s->cur_entry == FW_CFG_INVALID) ? NULL :
&s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
if (dma.control & FW_CFG_DMA_CTL_READ) {
read = 1;
2017-01-12 21:24:14 +03:00
write = 0;
} else if (dma.control & FW_CFG_DMA_CTL_WRITE) {
read = 0;
write = 1;
} else if (dma.control & FW_CFG_DMA_CTL_SKIP) {
read = 0;
2017-01-12 21:24:14 +03:00
write = 0;
} else {
dma.length = 0;
}
dma.control = 0;
while (dma.length > 0 && !(dma.control & FW_CFG_DMA_CTL_ERROR)) {
if (s->cur_entry == FW_CFG_INVALID || !e->data ||
s->cur_offset >= e->len) {
len = dma.length;
/* If the access is not a read access, it will be a skip access,
* tested before.
*/
if (read) {
if (dma_memory_set(s->dma_as, dma.address, 0, len,
MEMTXATTRS_UNSPECIFIED)) {
dma.control |= FW_CFG_DMA_CTL_ERROR;
}
}
2017-01-12 21:24:14 +03:00
if (write) {
dma.control |= FW_CFG_DMA_CTL_ERROR;
}
} else {
if (dma.length <= (e->len - s->cur_offset)) {
len = dma.length;
} else {
len = (e->len - s->cur_offset);
}
/* If the access is not a read access, it will be a skip access,
* tested before.
*/
if (read) {
if (dma_memory_write(s->dma_as, dma.address,
&e->data[s->cur_offset], len,
MEMTXATTRS_UNSPECIFIED)) {
dma.control |= FW_CFG_DMA_CTL_ERROR;
}
}
2017-01-12 21:24:14 +03:00
if (write) {
if (!e->allow_write ||
len != dma.length ||
dma_memory_read(s->dma_as, dma.address,
&e->data[s->cur_offset], len,
MEMTXATTRS_UNSPECIFIED)) {
2017-01-12 21:24:14 +03:00
dma.control |= FW_CFG_DMA_CTL_ERROR;
} else if (e->write_cb) {
e->write_cb(e->callback_opaque, s->cur_offset, len);
2017-01-12 21:24:14 +03:00
}
}
s->cur_offset += len;
}
dma.address += len;
dma.length -= len;
}
stl_be_dma(s->dma_as, dma_addr + offsetof(FWCfgDmaAccess, control),
dma.control, MEMTXATTRS_UNSPECIFIED);
trace_fw_cfg_read(s, 0);
}
static uint64_t fw_cfg_dma_mem_read(void *opaque, hwaddr addr,
unsigned size)
{
/* Return a signature value (and handle various read sizes) */
return extract64(FW_CFG_DMA_SIGNATURE, (8 - addr - size) * 8, size * 8);
}
static void fw_cfg_dma_mem_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
FWCfgState *s = opaque;
if (size == 4) {
if (addr == 0) {
/* FWCfgDmaAccess high address */
s->dma_addr = value << 32;
} else if (addr == 4) {
/* FWCfgDmaAccess low address */
s->dma_addr |= value;
fw_cfg_dma_transfer(s);
}
} else if (size == 8 && addr == 0) {
s->dma_addr = value;
fw_cfg_dma_transfer(s);
}
}
static bool fw_cfg_dma_mem_valid(void *opaque, hwaddr addr,
unsigned size, bool is_write,
MemTxAttrs attrs)
{
return !is_write || ((size == 4 && (addr == 0 || addr == 4)) ||
(size == 8 && addr == 0));
}
static bool fw_cfg_data_mem_valid(void *opaque, hwaddr addr,
unsigned size, bool is_write,
MemTxAttrs attrs)
{
return addr == 0;
}
static uint64_t fw_cfg_ctl_mem_read(void *opaque, hwaddr addr, unsigned size)
{
return 0;
}
static void fw_cfg_ctl_mem_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
fw_cfg_select(opaque, (uint16_t)value);
}
static bool fw_cfg_ctl_mem_valid(void *opaque, hwaddr addr,
unsigned size, bool is_write,
MemTxAttrs attrs)
{
return is_write && size == 2;
}
static void fw_cfg_comb_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
switch (size) {
case 1:
fw_cfg_write(opaque, (uint8_t)value);
break;
case 2:
fw_cfg_select(opaque, (uint16_t)value);
break;
}
}
static bool fw_cfg_comb_valid(void *opaque, hwaddr addr,
unsigned size, bool is_write,
MemTxAttrs attrs)
{
return (size == 1) || (is_write && size == 2);
}
static const MemoryRegionOps fw_cfg_ctl_mem_ops = {
.read = fw_cfg_ctl_mem_read,
.write = fw_cfg_ctl_mem_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid.accepts = fw_cfg_ctl_mem_valid,
};
static const MemoryRegionOps fw_cfg_data_mem_ops = {
.read = fw_cfg_data_read,
.write = fw_cfg_data_mem_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 1,
.accepts = fw_cfg_data_mem_valid,
},
};
static const MemoryRegionOps fw_cfg_comb_mem_ops = {
.read = fw_cfg_data_read,
.write = fw_cfg_comb_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid.accepts = fw_cfg_comb_valid,
};
static const MemoryRegionOps fw_cfg_dma_mem_ops = {
.read = fw_cfg_dma_mem_read,
.write = fw_cfg_dma_mem_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid.accepts = fw_cfg_dma_mem_valid,
.valid.max_access_size = 8,
.impl.max_access_size = 8,
};
static void fw_cfg_reset(DeviceState *d)
{
FWCfgState *s = FW_CFG(d);
fw_cfg: amend callback behavior spec to once per select Currently, the fw_cfg internal API specifies that if an item was set up with a read callback, the callback must be run each time a byte is read from the item. This behavior is both wasteful (most items do not have a read callback set), and impractical for bulk transfers (e.g., DMA read). At the time of this writing, the only items configured with a callback are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They all share the same callback functions: virt_acpi_build_update() on ARM (in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return without doing anything at all after the first time they are invoked with a given build_state; since build_state is also shared across all three items mentioned above, the callback only ever runs *once*, the first time either of the listed items is read). This patch amends the specification for fw_cfg_add_file_callback() to state that any available read callback will only be invoked once each time the item is selected. This change has no practical effect on the current behavior of QEMU, and it enables us to significantly optimize the behavior of fw_cfg reads during guest firmware setup, eliminating a large amount of redundant callback checks and invocations. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-05 17:32:48 +03:00
/* we never register a read callback for FW_CFG_SIGNATURE */
fw_cfg_select(s, FW_CFG_SIGNATURE);
}
/* Save restore 32 bit int as uint16_t
This is a Big hack, but it is how the old state did it.
Or we broke compatibility in the state, or we can't use struct tm
*/
static int get_uint32_as_uint16(QEMUFile *f, void *pv, size_t size,
const VMStateField *field)
{
uint32_t *v = pv;
*v = qemu_get_be16(f);
return 0;
}
static int put_unused(QEMUFile *f, void *pv, size_t size,
const VMStateField *field, JSONWriter *vmdesc)
{
fprintf(stderr, "uint32_as_uint16 is only used for backward compatibility.\n");
fprintf(stderr, "This functions shouldn't be called.\n");
return 0;
}
static const VMStateInfo vmstate_hack_uint32_as_uint16 = {
.name = "int32_as_uint16",
.get = get_uint32_as_uint16,
.put = put_unused,
};
#define VMSTATE_UINT16_HACK(_f, _s, _t) \
VMSTATE_SINGLE_TEST(_f, _s, _t, 0, vmstate_hack_uint32_as_uint16, uint32_t)
static bool is_version_1(void *opaque, int version_id)
{
return version_id == 1;
}
bool fw_cfg_dma_enabled(void *opaque)
{
FWCfgState *s = opaque;
return s->dma_enabled;
}
static bool fw_cfg_acpi_mr_restore(void *opaque)
{
FWCfgState *s = opaque;
bool mr_aligned;
mr_aligned = QEMU_IS_ALIGNED(s->table_mr_size, qemu_real_host_page_size()) &&
QEMU_IS_ALIGNED(s->linker_mr_size, qemu_real_host_page_size()) &&
QEMU_IS_ALIGNED(s->rsdp_mr_size, qemu_real_host_page_size());
return s->acpi_mr_restore && !mr_aligned;
}
static void fw_cfg_update_mr(FWCfgState *s, uint16_t key, size_t size)
{
MemoryRegion *mr;
ram_addr_t offset;
int arch = !!(key & FW_CFG_ARCH_LOCAL);
void *ptr;
key &= FW_CFG_ENTRY_MASK;
assert(key < fw_cfg_max_entry(s));
ptr = s->entries[arch][key].data;
mr = memory_region_from_host(ptr, &offset);
memory_region_ram_resize(mr, size, &error_abort);
}
static int fw_cfg_acpi_mr_restore_post_load(void *opaque, int version_id)
{
FWCfgState *s = opaque;
int i, index;
assert(s->files);
index = be32_to_cpu(s->files->count);
for (i = 0; i < index; i++) {
if (!strcmp(s->files->f[i].name, ACPI_BUILD_TABLE_FILE)) {
fw_cfg_update_mr(s, FW_CFG_FILE_FIRST + i, s->table_mr_size);
} else if (!strcmp(s->files->f[i].name, ACPI_BUILD_LOADER_FILE)) {
fw_cfg_update_mr(s, FW_CFG_FILE_FIRST + i, s->linker_mr_size);
} else if (!strcmp(s->files->f[i].name, ACPI_BUILD_RSDP_FILE)) {
fw_cfg_update_mr(s, FW_CFG_FILE_FIRST + i, s->rsdp_mr_size);
}
}
return 0;
}
static const VMStateDescription vmstate_fw_cfg_dma = {
.name = "fw_cfg/dma",
.needed = fw_cfg_dma_enabled,
.fields = (VMStateField[]) {
VMSTATE_UINT64(dma_addr, FWCfgState),
VMSTATE_END_OF_LIST()
},
};
static const VMStateDescription vmstate_fw_cfg_acpi_mr = {
.name = "fw_cfg/acpi_mr",
.version_id = 1,
.minimum_version_id = 1,
.needed = fw_cfg_acpi_mr_restore,
.post_load = fw_cfg_acpi_mr_restore_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT64(table_mr_size, FWCfgState),
VMSTATE_UINT64(linker_mr_size, FWCfgState),
VMSTATE_UINT64(rsdp_mr_size, FWCfgState),
VMSTATE_END_OF_LIST()
},
};
static const VMStateDescription vmstate_fw_cfg = {
.name = "fw_cfg",
.version_id = 2,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT16(cur_entry, FWCfgState),
VMSTATE_UINT16_HACK(cur_offset, FWCfgState, is_version_1),
VMSTATE_UINT32_V(cur_offset, FWCfgState, 2),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription*[]) {
&vmstate_fw_cfg_dma,
&vmstate_fw_cfg_acpi_mr,
NULL,
}
};
static void fw_cfg_add_bytes_callback(FWCfgState *s, uint16_t key,
FWCfgCallback select_cb,
FWCfgWriteCallback write_cb,
void *callback_opaque,
void *data, size_t len,
bool read_only)
{
int arch = !!(key & FW_CFG_ARCH_LOCAL);
key &= FW_CFG_ENTRY_MASK;
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
assert(key < fw_cfg_max_entry(s) && len < UINT32_MAX);
assert(s->entries[arch][key].data == NULL); /* avoid key conflict */
s->entries[arch][key].data = data;
s->entries[arch][key].len = (uint32_t)len;
s->entries[arch][key].select_cb = select_cb;
s->entries[arch][key].write_cb = write_cb;
s->entries[arch][key].callback_opaque = callback_opaque;
2017-01-12 21:24:14 +03:00
s->entries[arch][key].allow_write = !read_only;
}
static void *fw_cfg_modify_bytes_read(FWCfgState *s, uint16_t key,
void *data, size_t len)
{
void *ptr;
int arch = !!(key & FW_CFG_ARCH_LOCAL);
key &= FW_CFG_ENTRY_MASK;
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
assert(key < fw_cfg_max_entry(s) && len < UINT32_MAX);
/* return the old data to the function caller, avoid memory leak */
ptr = s->entries[arch][key].data;
s->entries[arch][key].data = data;
s->entries[arch][key].len = len;
s->entries[arch][key].callback_opaque = NULL;
2017-01-12 21:24:14 +03:00
s->entries[arch][key].allow_write = false;
return ptr;
}
void fw_cfg_add_bytes(FWCfgState *s, uint16_t key, void *data, size_t len)
{
trace_fw_cfg_add_bytes(key, trace_key_name(key), len);
fw_cfg_add_bytes_callback(s, key, NULL, NULL, NULL, data, len, true);
}
void fw_cfg_add_string(FWCfgState *s, uint16_t key, const char *value)
{
size_t sz = strlen(value) + 1;
trace_fw_cfg_add_string(key, trace_key_name(key), value);
fw_cfg_add_bytes(s, key, g_memdup(value, sz), sz);
}
void fw_cfg_modify_string(FWCfgState *s, uint16_t key, const char *value)
{
size_t sz = strlen(value) + 1;
char *old;
old = fw_cfg_modify_bytes_read(s, key, g_memdup(value, sz), sz);
g_free(old);
}
void fw_cfg_add_i16(FWCfgState *s, uint16_t key, uint16_t value)
{
uint16_t *copy;
copy = g_malloc(sizeof(value));
*copy = cpu_to_le16(value);
trace_fw_cfg_add_i16(key, trace_key_name(key), value);
fw_cfg_add_bytes(s, key, copy, sizeof(value));
}
void fw_cfg_modify_i16(FWCfgState *s, uint16_t key, uint16_t value)
{
uint16_t *copy, *old;
copy = g_malloc(sizeof(value));
*copy = cpu_to_le16(value);
old = fw_cfg_modify_bytes_read(s, key, copy, sizeof(value));
g_free(old);
}
void fw_cfg_add_i32(FWCfgState *s, uint16_t key, uint32_t value)
{
uint32_t *copy;
copy = g_malloc(sizeof(value));
*copy = cpu_to_le32(value);
trace_fw_cfg_add_i32(key, trace_key_name(key), value);
fw_cfg_add_bytes(s, key, copy, sizeof(value));
}
void fw_cfg_modify_i32(FWCfgState *s, uint16_t key, uint32_t value)
{
uint32_t *copy, *old;
copy = g_malloc(sizeof(value));
*copy = cpu_to_le32(value);
old = fw_cfg_modify_bytes_read(s, key, copy, sizeof(value));
g_free(old);
}
void fw_cfg_add_i64(FWCfgState *s, uint16_t key, uint64_t value)
{
uint64_t *copy;
copy = g_malloc(sizeof(value));
*copy = cpu_to_le64(value);
trace_fw_cfg_add_i64(key, trace_key_name(key), value);
fw_cfg_add_bytes(s, key, copy, sizeof(value));
}
void fw_cfg_modify_i64(FWCfgState *s, uint16_t key, uint64_t value)
{
uint64_t *copy, *old;
copy = g_malloc(sizeof(value));
*copy = cpu_to_le64(value);
old = fw_cfg_modify_bytes_read(s, key, copy, sizeof(value));
g_free(old);
}
void fw_cfg_set_order_override(FWCfgState *s, int order)
{
assert(s->fw_cfg_order_override == 0);
s->fw_cfg_order_override = order;
}
void fw_cfg_reset_order_override(FWCfgState *s)
{
assert(s->fw_cfg_order_override != 0);
s->fw_cfg_order_override = 0;
}
/*
* This is the legacy order list. For legacy systems, files are in
* the fw_cfg in the order defined below, by the "order" value. Note
* that some entries (VGA ROMs, NIC option ROMS, etc.) go into a
* specific area, but there may be more than one and they occur in the
* order that the user specifies them on the command line. Those are
* handled in a special manner, using the order override above.
*
* For non-legacy, the files are sorted by filename to avoid this kind
* of complexity in the future.
*
* This is only for x86, other arches don't implement versioning so
* they won't set legacy mode.
*/
static struct {
const char *name;
int order;
} fw_cfg_order[] = {
{ "etc/boot-menu-wait", 10 },
{ "bootsplash.jpg", 11 },
{ "bootsplash.bmp", 12 },
{ "etc/boot-fail-wait", 15 },
{ "etc/smbios/smbios-tables", 20 },
{ "etc/smbios/smbios-anchor", 30 },
{ "etc/e820", 40 },
{ "etc/reserved-memory-end", 50 },
{ "genroms/kvmvapic.bin", 55 },
{ "genroms/linuxboot.bin", 60 },
{ }, /* VGA ROMs from pc_vga_init come here, 70. */
{ }, /* NIC option ROMs from pc_nic_init come here, 80. */
{ "etc/system-states", 90 },
{ }, /* User ROMs come here, 100. */
{ }, /* Device FW comes here, 110. */
{ "etc/extra-pci-roots", 120 },
{ "etc/acpi/tables", 130 },
{ "etc/table-loader", 140 },
{ "etc/tpm/log", 150 },
{ "etc/acpi/rsdp", 160 },
{ "bootorder", 170 },
{ "etc/msr_feature_control", 180 },
#define FW_CFG_ORDER_OVERRIDE_LAST 200
};
/*
* Any sub-page size update to these table MRs will be lost during migration,
* as we use aligned size in ram_load_precopy() -> qemu_ram_resize() path.
* In order to avoid the inconsistency in sizes save them separately and
* migrate over in vmstate post_load().
*/
static void fw_cfg_acpi_mr_save(FWCfgState *s, const char *filename, size_t len)
{
if (!strcmp(filename, ACPI_BUILD_TABLE_FILE)) {
s->table_mr_size = len;
} else if (!strcmp(filename, ACPI_BUILD_LOADER_FILE)) {
s->linker_mr_size = len;
} else if (!strcmp(filename, ACPI_BUILD_RSDP_FILE)) {
s->rsdp_mr_size = len;
}
}
static int get_fw_cfg_order(FWCfgState *s, const char *name)
{
int i;
if (s->fw_cfg_order_override > 0) {
return s->fw_cfg_order_override;
}
for (i = 0; i < ARRAY_SIZE(fw_cfg_order); i++) {
if (fw_cfg_order[i].name == NULL) {
continue;
}
if (strcmp(name, fw_cfg_order[i].name) == 0) {
return fw_cfg_order[i].order;
}
}
/* Stick unknown stuff at the end. */
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 16:57:41 +03:00
warn_report("Unknown firmware file in legacy mode: %s", name);
return FW_CFG_ORDER_OVERRIDE_LAST;
}
void fw_cfg_add_file_callback(FWCfgState *s, const char *filename,
FWCfgCallback select_cb,
FWCfgWriteCallback write_cb,
void *callback_opaque,
2017-01-12 21:24:14 +03:00
void *data, size_t len, bool read_only)
{
int i, index, count;
size_t dsize;
MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
int order = 0;
if (!s->files) {
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
dsize = sizeof(uint32_t) + sizeof(FWCfgFile) * fw_cfg_file_slots(s);
s->files = g_malloc0(dsize);
fw_cfg_add_bytes(s, FW_CFG_FILE_DIR, s->files, dsize);
}
count = be32_to_cpu(s->files->count);
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
assert(count < fw_cfg_file_slots(s));
/* Find the insertion point. */
if (mc->legacy_fw_cfg_order) {
/*
* Sort by order. For files with the same order, we keep them
* in the sequence in which they were added.
*/
order = get_fw_cfg_order(s, filename);
for (index = count;
index > 0 && order < s->entry_order[index - 1];
index--);
} else {
/* Sort by file name. */
for (index = count;
index > 0 && strcmp(filename, s->files->f[index - 1].name) < 0;
index--);
}
/*
* Move all the entries from the index point and after down one
* to create a slot for the new entry. Because calculations are
* being done with the index, make it so that "i" is the current
* index and "i - 1" is the one being copied from, thus the
* unusual start and end in the for statement.
*/
for (i = count; i > index; i--) {
s->files->f[i] = s->files->f[i - 1];
s->files->f[i].select = cpu_to_be16(FW_CFG_FILE_FIRST + i);
s->entries[0][FW_CFG_FILE_FIRST + i] =
s->entries[0][FW_CFG_FILE_FIRST + i - 1];
s->entry_order[i] = s->entry_order[i - 1];
}
memset(&s->files->f[index], 0, sizeof(FWCfgFile));
memset(&s->entries[0][FW_CFG_FILE_FIRST + index], 0, sizeof(FWCfgEntry));
pstrcpy(s->files->f[index].name, sizeof(s->files->f[index].name), filename);
for (i = 0; i <= count; i++) {
if (i != index &&
strcmp(s->files->f[index].name, s->files->f[i].name) == 0) {
error_report("duplicate fw_cfg file name: %s",
s->files->f[index].name);
exit(1);
}
}
fw_cfg_add_bytes_callback(s, FW_CFG_FILE_FIRST + index,
select_cb, write_cb,
callback_opaque, data, len,
read_only);
s->files->f[index].size = cpu_to_be32(len);
s->files->f[index].select = cpu_to_be16(FW_CFG_FILE_FIRST + index);
s->entry_order[index] = order;
trace_fw_cfg_add_file(s, index, s->files->f[index].name, len);
s->files->count = cpu_to_be32(count+1);
fw_cfg_acpi_mr_save(s, filename, len);
}
void fw_cfg_add_file(FWCfgState *s, const char *filename,
void *data, size_t len)
{
fw_cfg_add_file_callback(s, filename, NULL, NULL, NULL, data, len, true);
}
void *fw_cfg_modify_file(FWCfgState *s, const char *filename,
void *data, size_t len)
{
int i, index;
void *ptr = NULL;
assert(s->files);
index = be32_to_cpu(s->files->count);
for (i = 0; i < index; i++) {
if (strcmp(filename, s->files->f[i].name) == 0) {
ptr = fw_cfg_modify_bytes_read(s, FW_CFG_FILE_FIRST + i,
data, len);
s->files->f[i].size = cpu_to_be32(len);
fw_cfg_acpi_mr_save(s, filename, len);
return ptr;
}
}
assert(index < fw_cfg_file_slots(s));
/* add new one */
fw_cfg_add_file_callback(s, filename, NULL, NULL, NULL, data, len, true);
return NULL;
}
2020-07-20 15:20:15 +03:00
bool fw_cfg_add_from_generator(FWCfgState *s, const char *filename,
const char *gen_id, Error **errp)
{
FWCfgDataGeneratorClass *klass;
GByteArray *array;
Object *obj;
gsize size;
obj = object_resolve_path_component(object_get_objects_root(), gen_id);
if (!obj) {
error_setg(errp, "Cannot find object ID '%s'", gen_id);
2020-07-20 15:20:15 +03:00
return false;
}
if (!object_dynamic_cast(obj, TYPE_FW_CFG_DATA_GENERATOR_INTERFACE)) {
error_setg(errp, "Object ID '%s' is not a '%s' subclass",
gen_id, TYPE_FW_CFG_DATA_GENERATOR_INTERFACE);
2020-07-20 15:20:15 +03:00
return false;
}
klass = FW_CFG_DATA_GENERATOR_GET_CLASS(obj);
fw_cfg: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^Firmware configuration (fw_cfg)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-6-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again. Coccinelle script rerun for commit 3203148917 "hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface"]
2020-07-07 19:50:34 +03:00
array = klass->get_data(obj, errp);
if (!array) {
2020-07-20 15:20:15 +03:00
return false;
}
size = array->len;
hw/nvram/fw_cfg: fix FWCfgDataGeneratorClass::get_data() consumption The documentation on g_byte_array_free() <https://developer.gnome.org/glib/stable/glib-Byte-Arrays.html#g-byte-array-free> says: > Returns > > the element data if free_segment is FALSE, otherwise NULL. The element > data should be freed using g_free(). Because we currently call g_byte_array_free() with free_segment=TRUE, we end up passing data=NULL to fw_cfg_add_file(). On the plus side, fw_cfg_data_read() and fw_cfg_dma_transfer() both deal with NULL data gracefully: QEMU does not crash when the guest reads such an item, the guest just gets a properly sized, but zero-filled blob. However, the bug breaks UEFI HTTPS boot, as the IANA_TLS_CIPHER array, generated otherwise correctly by the "tls-cipher-suites" object, is in effect replaced with a zero blob. Fix the issue by passing free_segment=FALSE to g_byte_array_free(): - the caller (fw_cfg_add_from_generator()) temporarily assumes ownership of the generated byte array, - then ownership of the byte array is transfered to fw_cfg, as fw_cfg_add_file() links (not copies) "data" into fw_cfg. Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Fixes: 3203148917d035b09f71986ac2eaa19a352d6d9d Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200916151510.22767-1-lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-16 18:15:10 +03:00
fw_cfg_add_file(s, filename, g_byte_array_free(array, FALSE), size);
2020-07-20 15:20:15 +03:00
return true;
}
void fw_cfg_add_extra_pci_roots(PCIBus *bus, FWCfgState *s)
{
int extra_hosts = 0;
if (!bus) {
return;
}
QLIST_FOREACH(bus, &bus->child, sibling) {
/* look for expander root buses */
if (pci_bus_is_root(bus)) {
extra_hosts++;
}
}
if (extra_hosts && s) {
uint64_t *val = g_malloc(sizeof(*val));
*val = cpu_to_le64(extra_hosts);
fw_cfg_add_file(s, "etc/extra-pci-roots", val, sizeof(*val));
}
}
static void fw_cfg_machine_reset(void *opaque)
{
MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
FWCfgState *s = opaque;
void *ptr;
size_t len;
char *buf;
buf = get_boot_devices_list(&len);
ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)buf, len);
g_free(ptr);
if (!mc->legacy_fw_cfg_order) {
buf = get_boot_devices_lchs_list(&len);
ptr = fw_cfg_modify_file(s, "bios-geometry", (uint8_t *)buf, len);
g_free(ptr);
}
}
static void fw_cfg_machine_ready(struct Notifier *n, void *data)
{
FWCfgState *s = container_of(n, FWCfgState, machine_ready);
qemu_register_reset(fw_cfg_machine_reset, s);
}
static Property fw_cfg_properties[] = {
DEFINE_PROP_BOOL("acpi-mr-restore", FWCfgState, acpi_mr_restore, true),
DEFINE_PROP_END_OF_LIST(),
};
static void fw_cfg_common_realize(DeviceState *dev, Error **errp)
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
{
FWCfgState *s = FW_CFG(dev);
MachineState *machine = MACHINE(qdev_get_machine());
uint32_t version = FW_CFG_VERSION;
if (!fw_cfg_find()) {
error_setg(errp, "at most one %s device is permitted", TYPE_FW_CFG);
return;
}
fw_cfg_add_bytes(s, FW_CFG_SIGNATURE, (char *)"QEMU", 4);
fw_cfg_add_bytes(s, FW_CFG_UUID, &qemu_uuid, 16);
fw_cfg_add_i16(s, FW_CFG_NOGRAPHIC, (uint16_t)!machine->enable_graphics);
fw_cfg_add_i16(s, FW_CFG_BOOT_MENU, (uint16_t)(machine->boot_config.has_menu && machine->boot_config.menu));
fw_cfg_bootsplash(s);
fw_cfg_reboot(s);
if (s->dma_enabled) {
version |= FW_CFG_VERSION_DMA;
}
fw_cfg_add_i32(s, FW_CFG_ID, version);
s->machine_ready.notify = fw_cfg_machine_ready;
qemu_add_machine_init_done_notifier(&s->machine_ready);
}
FWCfgState *fw_cfg_init_io_dma(uint32_t iobase, uint32_t dma_iobase,
AddressSpace *dma_as)
{
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
DeviceState *dev;
SysBusDevice *sbd;
FWCfgIoState *ios;
FWCfgState *s;
bool dma_requested = dma_iobase && dma_as;
qdev: Convert uses of qdev_create() with Coccinelle This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-10 08:31:58 +03:00
dev = qdev_new(TYPE_FW_CFG_IO);
if (!dma_requested) {
qdev_prop_set_bit(dev, "dma_enabled", false);
}
object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
OBJECT(dev));
sbd = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(sbd, &error_fatal);
ios = FW_CFG_IO(dev);
sysbus_add_io(sbd, iobase, &ios->comb_iomem);
s = FW_CFG(dev);
if (s->dma_enabled) {
/* 64 bits for the address field */
s->dma_as = dma_as;
s->dma_addr = 0;
sysbus_add_io(sbd, dma_iobase, &s->dma_iomem);
}
return s;
}
FWCfgState *fw_cfg_init_io(uint32_t iobase)
{
return fw_cfg_init_io_dma(iobase, 0, NULL);
}
FWCfgState *fw_cfg_init_mem_wide(hwaddr ctl_addr,
hwaddr data_addr, uint32_t data_width,
hwaddr dma_addr, AddressSpace *dma_as)
{
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
DeviceState *dev;
SysBusDevice *sbd;
FWCfgState *s;
bool dma_requested = dma_addr && dma_as;
qdev: Convert uses of qdev_create() with Coccinelle This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-10 08:31:58 +03:00
dev = qdev_new(TYPE_FW_CFG_MEM);
qdev_prop_set_uint32(dev, "data_width", data_width);
if (!dma_requested) {
qdev_prop_set_bit(dev, "dma_enabled", false);
}
object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
OBJECT(dev));
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
sbd = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(sbd, &error_fatal);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
sysbus_mmio_map(sbd, 0, ctl_addr);
sysbus_mmio_map(sbd, 1, data_addr);
s = FW_CFG(dev);
if (s->dma_enabled) {
s->dma_as = dma_as;
s->dma_addr = 0;
sysbus_mmio_map(sbd, 2, dma_addr);
}
return s;
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
}
FWCfgState *fw_cfg_init_mem(hwaddr ctl_addr, hwaddr data_addr)
{
return fw_cfg_init_mem_wide(ctl_addr, data_addr,
fw_cfg_data_mem_ops.valid.max_access_size,
0, NULL);
}
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
FWCfgState *fw_cfg_find(void)
{
/* Returns NULL unless there is exactly one fw_cfg device */
return FW_CFG(object_resolve_path_type("", TYPE_FW_CFG, NULL));
}
void load_image_to_fw_cfg(FWCfgState *fw_cfg, uint16_t size_key,
uint16_t data_key, const char *image_name,
bool try_decompress)
{
size_t size = -1;
uint8_t *data;
if (image_name == NULL) {
return;
}
if (try_decompress) {
size = load_image_gzipped_buffer(image_name,
LOAD_IMAGE_MAX_GUNZIP_BYTES, &data);
}
if (size == (size_t)-1) {
gchar *contents;
gsize length;
if (!g_file_get_contents(image_name, &contents, &length, NULL)) {
error_report("failed to load \"%s\"", image_name);
exit(1);
}
size = length;
data = (uint8_t *)contents;
}
fw_cfg_add_i32(fw_cfg, size_key, size);
fw_cfg_add_bytes(fw_cfg, data_key, data, size);
}
static void fw_cfg_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = fw_cfg_reset;
dc->vmsd = &vmstate_fw_cfg;
device_class_set_props(dc, fw_cfg_properties);
}
static const TypeInfo fw_cfg_info = {
.name = TYPE_FW_CFG,
.parent = TYPE_SYS_BUS_DEVICE,
.abstract = true,
.instance_size = sizeof(FWCfgState),
.class_init = fw_cfg_class_init,
};
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
static void fw_cfg_file_slots_allocate(FWCfgState *s, Error **errp)
{
uint16_t file_slots_max;
if (fw_cfg_file_slots(s) < FW_CFG_FILE_SLOTS_MIN) {
error_setg(errp, "\"file_slots\" must be at least 0x%x",
FW_CFG_FILE_SLOTS_MIN);
return;
}
/* (UINT16_MAX & FW_CFG_ENTRY_MASK) is the highest inclusive selector value
* that we permit. The actual (exclusive) value coming from the
* configuration is (FW_CFG_FILE_FIRST + fw_cfg_file_slots(s)). */
file_slots_max = (UINT16_MAX & FW_CFG_ENTRY_MASK) - FW_CFG_FILE_FIRST + 1;
if (fw_cfg_file_slots(s) > file_slots_max) {
error_setg(errp, "\"file_slots\" must not exceed 0x%" PRIx16,
file_slots_max);
return;
}
s->entries[0] = g_new0(FWCfgEntry, fw_cfg_max_entry(s));
s->entries[1] = g_new0(FWCfgEntry, fw_cfg_max_entry(s));
s->entry_order = g_new0(int, fw_cfg_max_entry(s));
}
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
static Property fw_cfg_io_properties[] = {
DEFINE_PROP_BOOL("dma_enabled", FWCfgIoState, parent_obj.dma_enabled,
true),
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
DEFINE_PROP_UINT16("x-file-slots", FWCfgIoState, parent_obj.file_slots,
fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine types More precisely, the "x-file-slots" count is bumped for all machine types that: (a) use fw_cfg, and (b) are not versioned (hence migration is not expected to work for them across QEMU releases anyway), or have version 2.9. This affects machine types implemented in the following source files: - "hw/arm/virt.c". The "virt-*" machine type is versioned, and the <= 2.8 versions already depend on HW_COMPAT_2_8 (see commit e353aac51b944). Therefore adding the "x-file-slots" compat values to HW_COMPAT_2_8 suffices. - "hw/i386/pc.c". The "pc-i440fx-*" (including "pc-*") and "pc-q35-*" machine types are versioned. Modifying HW_COMPAT_2_8 is sufficient here too (see commit "pc: Add 2.9 machine-types"). The "isapc" machtype is not versioned. The "xenfv" machine type, which uses fw_cfg for direct kernel booting, is also not versioned. - "hw/ppc/mac_newworld.c". The "mac99" machine type is not versioned. - "hw/ppc/mac_oldworld.c". The "g3beige" machine type is not versioned. - "hw/sparc/sun4m.c". None of the 9 machine types defined in this file appear versioned. - "hw/sparc64/sun4u.c". None of the 3 machine types defined in this file appear versioned. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:17 +03:00
FW_CFG_FILE_SLOTS_DFLT),
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
DEFINE_PROP_END_OF_LIST(),
};
static void fw_cfg_io_realize(DeviceState *dev, Error **errp)
{
fw_cfg: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^Firmware configuration (fw_cfg)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-6-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again. Coccinelle script rerun for commit 3203148917 "hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface"]
2020-07-07 19:50:34 +03:00
ERRP_GUARD();
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
FWCfgIoState *s = FW_CFG_IO(dev);
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
fw_cfg: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^Firmware configuration (fw_cfg)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-6-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again. Coccinelle script rerun for commit 3203148917 "hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface"]
2020-07-07 19:50:34 +03:00
fw_cfg_file_slots_allocate(FW_CFG(s), errp);
if (*errp) {
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
return;
}
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
/* when using port i/o, the 8-bit data register ALWAYS overlaps
* with half of the 16-bit control register. Hence, the total size
* of the i/o region used is FW_CFG_CTL_SIZE */
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
memory_region_init_io(&s->comb_iomem, OBJECT(s), &fw_cfg_comb_mem_ops,
FW_CFG(s), "fwcfg", FW_CFG_CTL_SIZE);
if (FW_CFG(s)->dma_enabled) {
memory_region_init_io(&FW_CFG(s)->dma_iomem, OBJECT(s),
&fw_cfg_dma_mem_ops, FW_CFG(s), "fwcfg.dma",
sizeof(dma_addr_t));
}
fw_cfg_common_realize(dev, errp);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
}
static void fw_cfg_io_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = fw_cfg_io_realize;
device_class_set_props(dc, fw_cfg_io_properties);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
}
static const TypeInfo fw_cfg_io_info = {
.name = TYPE_FW_CFG_IO,
.parent = TYPE_FW_CFG,
.instance_size = sizeof(FWCfgIoState),
.class_init = fw_cfg_io_class_init,
};
static Property fw_cfg_mem_properties[] = {
DEFINE_PROP_UINT32("data_width", FWCfgMemState, data_width, -1),
DEFINE_PROP_BOOL("dma_enabled", FWCfgMemState, parent_obj.dma_enabled,
true),
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
DEFINE_PROP_UINT16("x-file-slots", FWCfgMemState, parent_obj.file_slots,
fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine types More precisely, the "x-file-slots" count is bumped for all machine types that: (a) use fw_cfg, and (b) are not versioned (hence migration is not expected to work for them across QEMU releases anyway), or have version 2.9. This affects machine types implemented in the following source files: - "hw/arm/virt.c". The "virt-*" machine type is versioned, and the <= 2.8 versions already depend on HW_COMPAT_2_8 (see commit e353aac51b944). Therefore adding the "x-file-slots" compat values to HW_COMPAT_2_8 suffices. - "hw/i386/pc.c". The "pc-i440fx-*" (including "pc-*") and "pc-q35-*" machine types are versioned. Modifying HW_COMPAT_2_8 is sufficient here too (see commit "pc: Add 2.9 machine-types"). The "isapc" machtype is not versioned. The "xenfv" machine type, which uses fw_cfg for direct kernel booting, is also not versioned. - "hw/ppc/mac_newworld.c". The "mac99" machine type is not versioned. - "hw/ppc/mac_oldworld.c". The "g3beige" machine type is not versioned. - "hw/sparc/sun4m.c". None of the 9 machine types defined in this file appear versioned. - "hw/sparc64/sun4u.c". None of the 3 machine types defined in this file appear versioned. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:17 +03:00
FW_CFG_FILE_SLOTS_DFLT),
DEFINE_PROP_END_OF_LIST(),
};
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
static void fw_cfg_mem_realize(DeviceState *dev, Error **errp)
{
fw_cfg: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^Firmware configuration (fw_cfg)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-6-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again. Coccinelle script rerun for commit 3203148917 "hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface"]
2020-07-07 19:50:34 +03:00
ERRP_GUARD();
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
FWCfgMemState *s = FW_CFG_MEM(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
const MemoryRegionOps *data_ops = &fw_cfg_data_mem_ops;
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
fw_cfg: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^Firmware configuration (fw_cfg)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-6-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again. Coccinelle script rerun for commit 3203148917 "hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface"]
2020-07-07 19:50:34 +03:00
fw_cfg_file_slots_allocate(FW_CFG(s), errp);
if (*errp) {
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 21:24:15 +03:00
return;
}
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
memory_region_init_io(&s->ctl_iomem, OBJECT(s), &fw_cfg_ctl_mem_ops,
FW_CFG(s), "fwcfg.ctl", FW_CFG_CTL_SIZE);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
sysbus_init_mmio(sbd, &s->ctl_iomem);
if (s->data_width > data_ops->valid.max_access_size) {
s->wide_data_ops = *data_ops;
s->wide_data_ops.valid.max_access_size = s->data_width;
s->wide_data_ops.impl.max_access_size = s->data_width;
data_ops = &s->wide_data_ops;
}
memory_region_init_io(&s->data_iomem, OBJECT(s), data_ops, FW_CFG(s),
"fwcfg.data", data_ops->valid.max_access_size);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
sysbus_init_mmio(sbd, &s->data_iomem);
if (FW_CFG(s)->dma_enabled) {
memory_region_init_io(&FW_CFG(s)->dma_iomem, OBJECT(s),
&fw_cfg_dma_mem_ops, FW_CFG(s), "fwcfg.dma",
sizeof(dma_addr_t));
sysbus_init_mmio(sbd, &FW_CFG(s)->dma_iomem);
}
fw_cfg_common_realize(dev, errp);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
}
static void fw_cfg_mem_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = fw_cfg_mem_realize;
device_class_set_props(dc, fw_cfg_mem_properties);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
}
static const TypeInfo fw_cfg_mem_info = {
.name = TYPE_FW_CFG_MEM,
.parent = TYPE_FW_CFG,
.instance_size = sizeof(FWCfgMemState),
.class_init = fw_cfg_mem_class_init,
};
static void fw_cfg_register_types(void)
{
type_register_static(&fw_cfg_info);
fw_cfg: hard separation between the MMIO and I/O port mappings We are going to introduce a wide data register for fw_cfg, but only for the MMIO mapped device. The wide data register will also require the tightening of endiannesses. However we don't want to touch the I/O port mapped fw_cfg device at all. Currently QEMU provides a single fw_cfg device type that can handle both I/O port and MMIO mapping. This flexibility is not actually exploited by any board in the tree, but it renders restricting the above changes to MMIO very hard. Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and TYPE_FW_CFG_MEM. TYPE_FW_CFG_IO incorporates the base I/O port and the related combined MemoryRegion. (NB: all boards in the tree that use the I/O port mapped flavor opt for the combined mapping; that is, when the data port overlays the high address byte of the selector port. Therefore we can drop the capability to map those I/O ports separately.) TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and data registers, and their respective MemoryRegions. The "realize" and "props" class members are specific to each new derived class, and become unused for the base class. The base class retains the "reset" member and the "vmsd" member, because the reset functionality and the set of migrated data are not specific to the mapping. The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the possible mappings in separation. For now fw_cfg_init() is retained as a compatibility shim that enforces the above assumptions. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 15:11:35 +03:00
type_register_static(&fw_cfg_io_info);
type_register_static(&fw_cfg_mem_info);
}
type_init(fw_cfg_register_types)