qemu/util/vhost-user-server.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

486 lines
14 KiB
C
Raw Normal View History

/*
* Sharing QEMU devices via vhost-user protocol
*
* Copyright (c) Coiby Xu <coiby.xu@gmail.com>.
* Copyright (c) 2020 Red Hat, Inc.
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* later. See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "qemu/vhost-user-server.h"
#include "block/aio-wait.h"
/*
* Theory of operation:
*
* VuServer is started and stopped by vhost_user_server_start() and
* vhost_user_server_stop() from the main loop thread. Starting the server
* opens a vhost-user UNIX domain socket and listens for incoming connections.
* Only one connection is allowed at a time.
*
* The connection is handled by the vu_client_trip() coroutine in the
* VuServer->ctx AioContext. The coroutine consists of a vu_dispatch() loop
* where libvhost-user calls vu_message_read() to receive the next vhost-user
* protocol messages over the UNIX domain socket.
*
* When virtqueues are set up libvhost-user calls set_watch() to monitor kick
* fds. These fds are also handled in the VuServer->ctx AioContext.
*
* Both vu_client_trip() and kick fd monitoring can be stopped by shutting down
* the socket connection. Shutting down the socket connection causes
* vu_message_read() to fail since no more data can be received from the socket.
* After vu_dispatch() fails, vu_client_trip() calls vu_deinit() to stop
* libvhost-user before terminating the coroutine. vu_deinit() calls
* remove_watch() to stop monitoring kick fds and this stops virtqueue
* processing.
*
* When vu_client_trip() has finished cleaning up it schedules a BH in the main
* loop thread to accept the next client connection.
*
* When libvhost-user detects an error it calls panic_cb() and sets the
* dev->broken flag. Both vu_client_trip() and kick fd processing stop when
* the dev->broken flag is set.
*
* It is possible to switch AioContexts using
* vhost_user_server_detach_aio_context() and
* vhost_user_server_attach_aio_context(). They stop monitoring fds in the old
* AioContext and resume monitoring in the new AioContext. The vu_client_trip()
* coroutine remains in a yielded state during the switch. This is made
* possible by QIOChannel's support for spurious coroutine re-entry in
* qio_channel_yield(). The coroutine will restart I/O when re-entered from the
* new AioContext.
*/
static void vmsg_close_fds(VhostUserMsg *vmsg)
{
int i;
for (i = 0; i < vmsg->fd_num; i++) {
close(vmsg->fds[i]);
}
}
static void vmsg_unblock_fds(VhostUserMsg *vmsg)
{
int i;
for (i = 0; i < vmsg->fd_num; i++) {
qemu_socket_set_nonblock(vmsg->fds[i]);
}
}
static void panic_cb(VuDev *vu_dev, const char *buf)
{
error_report("vu_panic: %s", buf);
}
void vhost_user_server_inc_in_flight(VuServer *server)
{
assert(!server->wait_idle);
block/export: wait for vhost-user-blk requests when draining Each vhost-user-blk request runs in a coroutine. When the BlockBackend enters a drained section we need to enter a quiescent state. Currently any in-flight requests race with bdrv_drained_begin() because it is unaware of vhost-user-blk requests. When blk_co_preadv/pwritev()/etc returns it wakes the bdrv_drained_begin() thread but vhost-user-blk request processing has not yet finished. The request coroutine continues executing while the main loop thread thinks it is in a drained section. One example where this is unsafe is for blk_set_aio_context() where bdrv_drained_begin() is called before .aio_context_detached() and .aio_context_attach(). If request coroutines are still running after bdrv_drained_begin(), then the AioContext could change underneath them and they race with new requests processed in the new AioContext. This could lead to virtqueue corruption, for example. (This example is theoretical, I came across this while reading the code and have not tried to reproduce it.) It's easy to make bdrv_drained_begin() wait for in-flight requests: add a .drained_poll() callback that checks the VuServer's in-flight counter. VuServer just needs an API that returns true when there are requests in flight. The in-flight counter needs to be atomic. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230516190238.8401-7-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-16 22:02:24 +03:00
qatomic_inc(&server->in_flight);
}
void vhost_user_server_dec_in_flight(VuServer *server)
{
block/export: wait for vhost-user-blk requests when draining Each vhost-user-blk request runs in a coroutine. When the BlockBackend enters a drained section we need to enter a quiescent state. Currently any in-flight requests race with bdrv_drained_begin() because it is unaware of vhost-user-blk requests. When blk_co_preadv/pwritev()/etc returns it wakes the bdrv_drained_begin() thread but vhost-user-blk request processing has not yet finished. The request coroutine continues executing while the main loop thread thinks it is in a drained section. One example where this is unsafe is for blk_set_aio_context() where bdrv_drained_begin() is called before .aio_context_detached() and .aio_context_attach(). If request coroutines are still running after bdrv_drained_begin(), then the AioContext could change underneath them and they race with new requests processed in the new AioContext. This could lead to virtqueue corruption, for example. (This example is theoretical, I came across this while reading the code and have not tried to reproduce it.) It's easy to make bdrv_drained_begin() wait for in-flight requests: add a .drained_poll() callback that checks the VuServer's in-flight counter. VuServer just needs an API that returns true when there are requests in flight. The in-flight counter needs to be atomic. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230516190238.8401-7-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-16 22:02:24 +03:00
if (qatomic_fetch_dec(&server->in_flight) == 1) {
if (server->wait_idle) {
aio_co_wake(server->co_trip);
}
}
}
block/export: wait for vhost-user-blk requests when draining Each vhost-user-blk request runs in a coroutine. When the BlockBackend enters a drained section we need to enter a quiescent state. Currently any in-flight requests race with bdrv_drained_begin() because it is unaware of vhost-user-blk requests. When blk_co_preadv/pwritev()/etc returns it wakes the bdrv_drained_begin() thread but vhost-user-blk request processing has not yet finished. The request coroutine continues executing while the main loop thread thinks it is in a drained section. One example where this is unsafe is for blk_set_aio_context() where bdrv_drained_begin() is called before .aio_context_detached() and .aio_context_attach(). If request coroutines are still running after bdrv_drained_begin(), then the AioContext could change underneath them and they race with new requests processed in the new AioContext. This could lead to virtqueue corruption, for example. (This example is theoretical, I came across this while reading the code and have not tried to reproduce it.) It's easy to make bdrv_drained_begin() wait for in-flight requests: add a .drained_poll() callback that checks the VuServer's in-flight counter. VuServer just needs an API that returns true when there are requests in flight. The in-flight counter needs to be atomic. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230516190238.8401-7-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-16 22:02:24 +03:00
bool vhost_user_server_has_in_flight(VuServer *server)
{
return qatomic_load_acquire(&server->in_flight) > 0;
}
static bool coroutine_fn
vu_message_read(VuDev *vu_dev, int conn_fd, VhostUserMsg *vmsg)
{
struct iovec iov = {
.iov_base = (char *)vmsg,
.iov_len = VHOST_USER_HDR_SIZE,
};
int rc, read_bytes = 0;
Error *local_err = NULL;
const size_t max_fds = G_N_ELEMENTS(vmsg->fds);
VuServer *server = container_of(vu_dev, VuServer, vu_dev);
QIOChannel *ioc = server->ioc;
vmsg->fd_num = 0;
if (!ioc) {
error_report_err(local_err);
goto fail;
}
assert(qemu_in_coroutine());
do {
size_t nfds = 0;
int *fds = NULL;
/*
* qio_channel_readv_full may have short reads, keeping calling it
* until getting VHOST_USER_HDR_SIZE or 0 bytes in total
*/
rc = qio_channel_readv_full(ioc, &iov, 1, &fds, &nfds, 0, &local_err);
if (rc < 0) {
if (rc == QIO_CHANNEL_ERR_BLOCK) {
assert(local_err == NULL);
io: follow coroutine AioContext in qio_channel_yield() The ongoing QEMU multi-queue block layer effort makes it possible for multiple threads to process I/O in parallel. The nbd block driver is not compatible with the multi-queue block layer yet because QIOChannel cannot be used easily from coroutines running in multiple threads. This series changes the QIOChannel API to make that possible. In the current API, calling qio_channel_attach_aio_context() sets the AioContext where qio_channel_yield() installs an fd handler prior to yielding: qio_channel_attach_aio_context(ioc, my_ctx); ... qio_channel_yield(ioc); // my_ctx is used here ... qio_channel_detach_aio_context(ioc); This API design has limitations: reading and writing must be done in the same AioContext and moving between AioContexts involves a cumbersome sequence of API calls that is not suitable for doing on a per-request basis. There is no fundamental reason why a QIOChannel needs to run within the same AioContext every time qio_channel_yield() is called. QIOChannel only uses the AioContext while inside qio_channel_yield(). The rest of the time, QIOChannel is independent of any AioContext. In the new API, qio_channel_yield() queries the AioContext from the current coroutine using qemu_coroutine_get_aio_context(). There is no need to explicitly attach/detach AioContexts anymore and qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone. One coroutine can read from the QIOChannel while another coroutine writes from a different AioContext. This API change allows the nbd block driver to use QIOChannel from any thread. It's important to keep in mind that the block driver already synchronizes QIOChannel access and ensures that two coroutines never read simultaneously or write simultaneously. This patch updates all users of qio_channel_attach_aio_context() to the new API. Most conversions are simple, but vhost-user-server requires a new qemu_coroutine_yield() call to quiesce the vu_client_trip() coroutine when not attached to any AioContext. While the API is has become simpler, there is one wart: QIOChannel has a special case for the iohandler AioContext (used for handlers that must not run in nested event loops). I didn't find an elegant way preserve that behavior, so I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false) for opting in to the new AioContext model. By default QIOChannel uses the iohandler AioHandler. Code that formerly called qio_channel_attach_aio_context() now calls qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is created. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230830224802.493686-5-stefanha@redhat.com> [eblake: also fix migration/rdma.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2023-08-31 01:48:02 +03:00
if (server->ctx) {
server->in_qio_channel_yield = true;
qio_channel_yield(ioc, G_IO_IN);
server->in_qio_channel_yield = false;
} else {
/* Wait until attached to an AioContext again */
qemu_coroutine_yield();
}
continue;
} else {
error_report_err(local_err);
goto fail;
}
}
if (nfds > 0) {
if (vmsg->fd_num + nfds > max_fds) {
error_report("A maximum of %zu fds are allowed, "
"however got %zu fds now",
max_fds, vmsg->fd_num + nfds);
g_free(fds);
goto fail;
}
memcpy(vmsg->fds + vmsg->fd_num, fds, nfds * sizeof(vmsg->fds[0]));
vmsg->fd_num += nfds;
g_free(fds);
}
if (rc == 0) { /* socket closed */
goto fail;
}
iov.iov_base += rc;
iov.iov_len -= rc;
read_bytes += rc;
} while (read_bytes != VHOST_USER_HDR_SIZE);
/* qio_channel_readv_full will make socket fds blocking, unblock them */
vmsg_unblock_fds(vmsg);
if (vmsg->size > sizeof(vmsg->payload)) {
error_report("Error: too big message request: %d, "
"size: vmsg->size: %u, "
"while sizeof(vmsg->payload) = %zu",
vmsg->request, vmsg->size, sizeof(vmsg->payload));
goto fail;
}
struct iovec iov_payload = {
.iov_base = (char *)&vmsg->payload,
.iov_len = vmsg->size,
};
if (vmsg->size) {
rc = qio_channel_readv_all_eof(ioc, &iov_payload, 1, &local_err);
if (rc != 1) {
if (local_err) {
error_report_err(local_err);
}
goto fail;
}
}
return true;
fail:
vmsg_close_fds(vmsg);
return false;
}
static coroutine_fn void vu_client_trip(void *opaque)
{
VuServer *server = opaque;
VuDev *vu_dev = &server->vu_dev;
while (!vu_dev->broken && vu_dispatch(vu_dev)) {
/* Keep running */
}
block/export: wait for vhost-user-blk requests when draining Each vhost-user-blk request runs in a coroutine. When the BlockBackend enters a drained section we need to enter a quiescent state. Currently any in-flight requests race with bdrv_drained_begin() because it is unaware of vhost-user-blk requests. When blk_co_preadv/pwritev()/etc returns it wakes the bdrv_drained_begin() thread but vhost-user-blk request processing has not yet finished. The request coroutine continues executing while the main loop thread thinks it is in a drained section. One example where this is unsafe is for blk_set_aio_context() where bdrv_drained_begin() is called before .aio_context_detached() and .aio_context_attach(). If request coroutines are still running after bdrv_drained_begin(), then the AioContext could change underneath them and they race with new requests processed in the new AioContext. This could lead to virtqueue corruption, for example. (This example is theoretical, I came across this while reading the code and have not tried to reproduce it.) It's easy to make bdrv_drained_begin() wait for in-flight requests: add a .drained_poll() callback that checks the VuServer's in-flight counter. VuServer just needs an API that returns true when there are requests in flight. The in-flight counter needs to be atomic. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230516190238.8401-7-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-16 22:02:24 +03:00
if (vhost_user_server_has_in_flight(server)) {
/* Wait for requests to complete before we can unmap the memory */
server->wait_idle = true;
qemu_coroutine_yield();
server->wait_idle = false;
}
block/export: wait for vhost-user-blk requests when draining Each vhost-user-blk request runs in a coroutine. When the BlockBackend enters a drained section we need to enter a quiescent state. Currently any in-flight requests race with bdrv_drained_begin() because it is unaware of vhost-user-blk requests. When blk_co_preadv/pwritev()/etc returns it wakes the bdrv_drained_begin() thread but vhost-user-blk request processing has not yet finished. The request coroutine continues executing while the main loop thread thinks it is in a drained section. One example where this is unsafe is for blk_set_aio_context() where bdrv_drained_begin() is called before .aio_context_detached() and .aio_context_attach(). If request coroutines are still running after bdrv_drained_begin(), then the AioContext could change underneath them and they race with new requests processed in the new AioContext. This could lead to virtqueue corruption, for example. (This example is theoretical, I came across this while reading the code and have not tried to reproduce it.) It's easy to make bdrv_drained_begin() wait for in-flight requests: add a .drained_poll() callback that checks the VuServer's in-flight counter. VuServer just needs an API that returns true when there are requests in flight. The in-flight counter needs to be atomic. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230516190238.8401-7-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-16 22:02:24 +03:00
assert(!vhost_user_server_has_in_flight(server));
vu_deinit(vu_dev);
/* vu_deinit() should have called remove_watch() */
assert(QTAILQ_EMPTY(&server->vu_fd_watches));
object_unref(OBJECT(server->sioc));
server->sioc = NULL;
object_unref(OBJECT(server->ioc));
server->ioc = NULL;
server->co_trip = NULL;
if (server->restart_listener_bh) {
qemu_bh_schedule(server->restart_listener_bh);
}
aio_wait_kick();
}
/*
* a wrapper for vu_kick_cb
*
* since aio_dispatch can only pass one user data pointer to the
* callback function, pack VuDev and pvt into a struct. Then unpack it
* and pass them to vu_kick_cb
*/
static void kick_handler(void *opaque)
{
VuFdWatch *vu_fd_watch = opaque;
VuDev *vu_dev = vu_fd_watch->vu_dev;
vu_fd_watch->cb(vu_dev, 0, vu_fd_watch->pvt);
/* Stop vu_client_trip() if an error occurred in vu_fd_watch->cb() */
if (vu_dev->broken) {
VuServer *server = container_of(vu_dev, VuServer, vu_dev);
qio_channel_shutdown(server->ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
}
}
static VuFdWatch *find_vu_fd_watch(VuServer *server, int fd)
{
VuFdWatch *vu_fd_watch, *next;
QTAILQ_FOREACH_SAFE(vu_fd_watch, &server->vu_fd_watches, next, next) {
if (vu_fd_watch->fd == fd) {
return vu_fd_watch;
}
}
return NULL;
}
static void
set_watch(VuDev *vu_dev, int fd, int vu_evt,
vu_watch_cb cb, void *pvt)
{
VuServer *server = container_of(vu_dev, VuServer, vu_dev);
g_assert(vu_dev);
g_assert(fd >= 0);
g_assert(cb);
VuFdWatch *vu_fd_watch = find_vu_fd_watch(server, fd);
if (!vu_fd_watch) {
VuFdWatch *vu_fd_watch = g_new0(VuFdWatch, 1);
QTAILQ_INSERT_TAIL(&server->vu_fd_watches, vu_fd_watch, next);
vu_fd_watch->fd = fd;
vu_fd_watch->cb = cb;
qemu_socket_set_nonblock(fd);
io: follow coroutine AioContext in qio_channel_yield() The ongoing QEMU multi-queue block layer effort makes it possible for multiple threads to process I/O in parallel. The nbd block driver is not compatible with the multi-queue block layer yet because QIOChannel cannot be used easily from coroutines running in multiple threads. This series changes the QIOChannel API to make that possible. In the current API, calling qio_channel_attach_aio_context() sets the AioContext where qio_channel_yield() installs an fd handler prior to yielding: qio_channel_attach_aio_context(ioc, my_ctx); ... qio_channel_yield(ioc); // my_ctx is used here ... qio_channel_detach_aio_context(ioc); This API design has limitations: reading and writing must be done in the same AioContext and moving between AioContexts involves a cumbersome sequence of API calls that is not suitable for doing on a per-request basis. There is no fundamental reason why a QIOChannel needs to run within the same AioContext every time qio_channel_yield() is called. QIOChannel only uses the AioContext while inside qio_channel_yield(). The rest of the time, QIOChannel is independent of any AioContext. In the new API, qio_channel_yield() queries the AioContext from the current coroutine using qemu_coroutine_get_aio_context(). There is no need to explicitly attach/detach AioContexts anymore and qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone. One coroutine can read from the QIOChannel while another coroutine writes from a different AioContext. This API change allows the nbd block driver to use QIOChannel from any thread. It's important to keep in mind that the block driver already synchronizes QIOChannel access and ensures that two coroutines never read simultaneously or write simultaneously. This patch updates all users of qio_channel_attach_aio_context() to the new API. Most conversions are simple, but vhost-user-server requires a new qemu_coroutine_yield() call to quiesce the vu_client_trip() coroutine when not attached to any AioContext. While the API is has become simpler, there is one wart: QIOChannel has a special case for the iohandler AioContext (used for handlers that must not run in nested event loops). I didn't find an elegant way preserve that behavior, so I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false) for opting in to the new AioContext model. By default QIOChannel uses the iohandler AioHandler. Code that formerly called qio_channel_attach_aio_context() now calls qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is created. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230830224802.493686-5-stefanha@redhat.com> [eblake: also fix migration/rdma.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2023-08-31 01:48:02 +03:00
aio_set_fd_handler(server->ctx, fd, kick_handler,
aio-posix: split poll check from ready handler Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-07 16:23:31 +03:00
NULL, NULL, NULL, vu_fd_watch);
vu_fd_watch->vu_dev = vu_dev;
vu_fd_watch->pvt = pvt;
}
}
static void remove_watch(VuDev *vu_dev, int fd)
{
VuServer *server;
g_assert(vu_dev);
g_assert(fd >= 0);
server = container_of(vu_dev, VuServer, vu_dev);
VuFdWatch *vu_fd_watch = find_vu_fd_watch(server, fd);
if (!vu_fd_watch) {
return;
}
io: follow coroutine AioContext in qio_channel_yield() The ongoing QEMU multi-queue block layer effort makes it possible for multiple threads to process I/O in parallel. The nbd block driver is not compatible with the multi-queue block layer yet because QIOChannel cannot be used easily from coroutines running in multiple threads. This series changes the QIOChannel API to make that possible. In the current API, calling qio_channel_attach_aio_context() sets the AioContext where qio_channel_yield() installs an fd handler prior to yielding: qio_channel_attach_aio_context(ioc, my_ctx); ... qio_channel_yield(ioc); // my_ctx is used here ... qio_channel_detach_aio_context(ioc); This API design has limitations: reading and writing must be done in the same AioContext and moving between AioContexts involves a cumbersome sequence of API calls that is not suitable for doing on a per-request basis. There is no fundamental reason why a QIOChannel needs to run within the same AioContext every time qio_channel_yield() is called. QIOChannel only uses the AioContext while inside qio_channel_yield(). The rest of the time, QIOChannel is independent of any AioContext. In the new API, qio_channel_yield() queries the AioContext from the current coroutine using qemu_coroutine_get_aio_context(). There is no need to explicitly attach/detach AioContexts anymore and qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone. One coroutine can read from the QIOChannel while another coroutine writes from a different AioContext. This API change allows the nbd block driver to use QIOChannel from any thread. It's important to keep in mind that the block driver already synchronizes QIOChannel access and ensures that two coroutines never read simultaneously or write simultaneously. This patch updates all users of qio_channel_attach_aio_context() to the new API. Most conversions are simple, but vhost-user-server requires a new qemu_coroutine_yield() call to quiesce the vu_client_trip() coroutine when not attached to any AioContext. While the API is has become simpler, there is one wart: QIOChannel has a special case for the iohandler AioContext (used for handlers that must not run in nested event loops). I didn't find an elegant way preserve that behavior, so I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false) for opting in to the new AioContext model. By default QIOChannel uses the iohandler AioHandler. Code that formerly called qio_channel_attach_aio_context() now calls qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is created. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230830224802.493686-5-stefanha@redhat.com> [eblake: also fix migration/rdma.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2023-08-31 01:48:02 +03:00
aio_set_fd_handler(server->ctx, fd, NULL, NULL, NULL, NULL, NULL);
QTAILQ_REMOVE(&server->vu_fd_watches, vu_fd_watch, next);
g_free(vu_fd_watch);
}
static void vu_accept(QIONetListener *listener, QIOChannelSocket *sioc,
gpointer opaque)
{
VuServer *server = opaque;
if (server->sioc) {
warn_report("Only one vhost-user client is allowed to "
"connect the server one time");
return;
}
if (!vu_init(&server->vu_dev, server->max_queues, sioc->fd, panic_cb,
vu_message_read, set_watch, remove_watch, server->vu_iface)) {
error_report("Failed to initialize libvhost-user");
return;
}
/*
* Unset the callback function for network listener to make another
* vhost-user client keeping waiting until this client disconnects
*/
qio_net_listener_set_client_func(server->listener,
NULL,
NULL,
NULL);
server->sioc = sioc;
/*
* Increase the object reference, so sioc will not freed by
* qio_net_listener_channel_func which will call object_unref(OBJECT(sioc))
*/
object_ref(OBJECT(server->sioc));
qio_channel_set_name(QIO_CHANNEL(sioc), "vhost-user client");
server->ioc = QIO_CHANNEL(sioc);
object_ref(OBJECT(server->ioc));
/* TODO vu_message_write() spins if non-blocking! */
qio_channel_set_blocking(server->ioc, false, NULL);
io: follow coroutine AioContext in qio_channel_yield() The ongoing QEMU multi-queue block layer effort makes it possible for multiple threads to process I/O in parallel. The nbd block driver is not compatible with the multi-queue block layer yet because QIOChannel cannot be used easily from coroutines running in multiple threads. This series changes the QIOChannel API to make that possible. In the current API, calling qio_channel_attach_aio_context() sets the AioContext where qio_channel_yield() installs an fd handler prior to yielding: qio_channel_attach_aio_context(ioc, my_ctx); ... qio_channel_yield(ioc); // my_ctx is used here ... qio_channel_detach_aio_context(ioc); This API design has limitations: reading and writing must be done in the same AioContext and moving between AioContexts involves a cumbersome sequence of API calls that is not suitable for doing on a per-request basis. There is no fundamental reason why a QIOChannel needs to run within the same AioContext every time qio_channel_yield() is called. QIOChannel only uses the AioContext while inside qio_channel_yield(). The rest of the time, QIOChannel is independent of any AioContext. In the new API, qio_channel_yield() queries the AioContext from the current coroutine using qemu_coroutine_get_aio_context(). There is no need to explicitly attach/detach AioContexts anymore and qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone. One coroutine can read from the QIOChannel while another coroutine writes from a different AioContext. This API change allows the nbd block driver to use QIOChannel from any thread. It's important to keep in mind that the block driver already synchronizes QIOChannel access and ensures that two coroutines never read simultaneously or write simultaneously. This patch updates all users of qio_channel_attach_aio_context() to the new API. Most conversions are simple, but vhost-user-server requires a new qemu_coroutine_yield() call to quiesce the vu_client_trip() coroutine when not attached to any AioContext. While the API is has become simpler, there is one wart: QIOChannel has a special case for the iohandler AioContext (used for handlers that must not run in nested event loops). I didn't find an elegant way preserve that behavior, so I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false) for opting in to the new AioContext model. By default QIOChannel uses the iohandler AioHandler. Code that formerly called qio_channel_attach_aio_context() now calls qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is created. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230830224802.493686-5-stefanha@redhat.com> [eblake: also fix migration/rdma.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2023-08-31 01:48:02 +03:00
qio_channel_set_follow_coroutine_ctx(server->ioc, true);
server->co_trip = qemu_coroutine_create(vu_client_trip, server);
aio_context_acquire(server->ctx);
vhost_user_server_attach_aio_context(server, server->ctx);
aio_context_release(server->ctx);
}
/* server->ctx acquired by caller */
void vhost_user_server_stop(VuServer *server)
{
qemu_bh_delete(server->restart_listener_bh);
server->restart_listener_bh = NULL;
if (server->sioc) {
VuFdWatch *vu_fd_watch;
QTAILQ_FOREACH(vu_fd_watch, &server->vu_fd_watches, next) {
aio_set_fd_handler(server->ctx, vu_fd_watch->fd,
aio-posix: split poll check from ready handler Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-07 16:23:31 +03:00
NULL, NULL, NULL, NULL, vu_fd_watch);
}
qio_channel_shutdown(server->ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
AIO_WAIT_WHILE(server->ctx, server->co_trip);
}
if (server->listener) {
qio_net_listener_disconnect(server->listener);
object_unref(OBJECT(server->listener));
}
}
/*
* Allow the next client to connect to the server. Called from a BH in the main
* loop.
*/
static void restart_listener_bh(void *opaque)
{
VuServer *server = opaque;
qio_net_listener_set_client_func(server->listener, vu_accept, server,
NULL);
}
/* Called with ctx acquired */
void vhost_user_server_attach_aio_context(VuServer *server, AioContext *ctx)
{
VuFdWatch *vu_fd_watch;
server->ctx = ctx;
if (!server->sioc) {
return;
}
QTAILQ_FOREACH(vu_fd_watch, &server->vu_fd_watches, next) {
aio_set_fd_handler(ctx, vu_fd_watch->fd, kick_handler, NULL,
aio-posix: split poll check from ready handler Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-07 16:23:31 +03:00
NULL, NULL, vu_fd_watch);
}
io: follow coroutine AioContext in qio_channel_yield() The ongoing QEMU multi-queue block layer effort makes it possible for multiple threads to process I/O in parallel. The nbd block driver is not compatible with the multi-queue block layer yet because QIOChannel cannot be used easily from coroutines running in multiple threads. This series changes the QIOChannel API to make that possible. In the current API, calling qio_channel_attach_aio_context() sets the AioContext where qio_channel_yield() installs an fd handler prior to yielding: qio_channel_attach_aio_context(ioc, my_ctx); ... qio_channel_yield(ioc); // my_ctx is used here ... qio_channel_detach_aio_context(ioc); This API design has limitations: reading and writing must be done in the same AioContext and moving between AioContexts involves a cumbersome sequence of API calls that is not suitable for doing on a per-request basis. There is no fundamental reason why a QIOChannel needs to run within the same AioContext every time qio_channel_yield() is called. QIOChannel only uses the AioContext while inside qio_channel_yield(). The rest of the time, QIOChannel is independent of any AioContext. In the new API, qio_channel_yield() queries the AioContext from the current coroutine using qemu_coroutine_get_aio_context(). There is no need to explicitly attach/detach AioContexts anymore and qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone. One coroutine can read from the QIOChannel while another coroutine writes from a different AioContext. This API change allows the nbd block driver to use QIOChannel from any thread. It's important to keep in mind that the block driver already synchronizes QIOChannel access and ensures that two coroutines never read simultaneously or write simultaneously. This patch updates all users of qio_channel_attach_aio_context() to the new API. Most conversions are simple, but vhost-user-server requires a new qemu_coroutine_yield() call to quiesce the vu_client_trip() coroutine when not attached to any AioContext. While the API is has become simpler, there is one wart: QIOChannel has a special case for the iohandler AioContext (used for handlers that must not run in nested event loops). I didn't find an elegant way preserve that behavior, so I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false) for opting in to the new AioContext model. By default QIOChannel uses the iohandler AioHandler. Code that formerly called qio_channel_attach_aio_context() now calls qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is created. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230830224802.493686-5-stefanha@redhat.com> [eblake: also fix migration/rdma.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2023-08-31 01:48:02 +03:00
assert(!server->in_qio_channel_yield);
aio_co_schedule(ctx, server->co_trip);
}
/* Called with server->ctx acquired */
void vhost_user_server_detach_aio_context(VuServer *server)
{
if (server->sioc) {
VuFdWatch *vu_fd_watch;
QTAILQ_FOREACH(vu_fd_watch, &server->vu_fd_watches, next) {
aio_set_fd_handler(server->ctx, vu_fd_watch->fd,
aio-posix: split poll check from ready handler Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-07 16:23:31 +03:00
NULL, NULL, NULL, NULL, vu_fd_watch);
}
}
server->ctx = NULL;
io: follow coroutine AioContext in qio_channel_yield() The ongoing QEMU multi-queue block layer effort makes it possible for multiple threads to process I/O in parallel. The nbd block driver is not compatible with the multi-queue block layer yet because QIOChannel cannot be used easily from coroutines running in multiple threads. This series changes the QIOChannel API to make that possible. In the current API, calling qio_channel_attach_aio_context() sets the AioContext where qio_channel_yield() installs an fd handler prior to yielding: qio_channel_attach_aio_context(ioc, my_ctx); ... qio_channel_yield(ioc); // my_ctx is used here ... qio_channel_detach_aio_context(ioc); This API design has limitations: reading and writing must be done in the same AioContext and moving between AioContexts involves a cumbersome sequence of API calls that is not suitable for doing on a per-request basis. There is no fundamental reason why a QIOChannel needs to run within the same AioContext every time qio_channel_yield() is called. QIOChannel only uses the AioContext while inside qio_channel_yield(). The rest of the time, QIOChannel is independent of any AioContext. In the new API, qio_channel_yield() queries the AioContext from the current coroutine using qemu_coroutine_get_aio_context(). There is no need to explicitly attach/detach AioContexts anymore and qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone. One coroutine can read from the QIOChannel while another coroutine writes from a different AioContext. This API change allows the nbd block driver to use QIOChannel from any thread. It's important to keep in mind that the block driver already synchronizes QIOChannel access and ensures that two coroutines never read simultaneously or write simultaneously. This patch updates all users of qio_channel_attach_aio_context() to the new API. Most conversions are simple, but vhost-user-server requires a new qemu_coroutine_yield() call to quiesce the vu_client_trip() coroutine when not attached to any AioContext. While the API is has become simpler, there is one wart: QIOChannel has a special case for the iohandler AioContext (used for handlers that must not run in nested event loops). I didn't find an elegant way preserve that behavior, so I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false) for opting in to the new AioContext model. By default QIOChannel uses the iohandler AioHandler. Code that formerly called qio_channel_attach_aio_context() now calls qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is created. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230830224802.493686-5-stefanha@redhat.com> [eblake: also fix migration/rdma.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2023-08-31 01:48:02 +03:00
if (server->ioc) {
if (server->in_qio_channel_yield) {
/* Stop receiving the next vhost-user message */
qio_channel_wake_read(server->ioc);
}
}
}
bool vhost_user_server_start(VuServer *server,
SocketAddress *socket_addr,
AioContext *ctx,
uint16_t max_queues,
const VuDevIface *vu_iface,
Error **errp)
{
QEMUBH *bh;
block/export: convert vhost-user-blk server to block export API Use the new QAPI block exports API instead of defining our own QOM objects. This is a large change because the lifecycle of VuBlockDev needs to follow BlockExportDriver. QOM properties are replaced by QAPI options objects. VuBlockDev is renamed VuBlkExport and contains a BlockExport field. Several fields can be dropped since BlockExport already has equivalents. The file names and meson build integration will be adjusted in a future patch. libvhost-user should probably be built as a static library that is linked into QEMU instead of as a .c file that results in duplicate compilation. The new command-line syntax is: $ qemu-storage-daemon \ --blockdev file,node-name=drive0,filename=test.img \ --export vhost-user-blk,node-name=drive0,id=export0,unix-socket=/tmp/vhost-user-blk.sock Note that unix-socket is optional because we may wish to accept chardevs too in the future. Markus noted that supported address families are not explicit in the QAPI schema. It is unlikely that support for more address families will be added since file descriptor passing is required and few address families support it. If a new address family needs to be added, then the QAPI 'features' syntax can be used to advertize them. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 20200924151549.913737-12-stefanha@redhat.com [Skip test on big-endian host architectures because this device doesn't support them yet (as already mentioned in a code comment). --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-24 18:15:47 +03:00
QIONetListener *listener;
if (socket_addr->type != SOCKET_ADDRESS_TYPE_UNIX &&
socket_addr->type != SOCKET_ADDRESS_TYPE_FD) {
error_setg(errp, "Only socket address types 'unix' and 'fd' are supported");
return false;
}
listener = qio_net_listener_new();
if (qio_net_listener_open_sync(listener, socket_addr, 1,
errp) < 0) {
object_unref(OBJECT(listener));
return false;
}
bh = qemu_bh_new(restart_listener_bh, server);
/* zero out unspecified fields */
*server = (VuServer) {
.listener = listener,
.restart_listener_bh = bh,
.vu_iface = vu_iface,
.max_queues = max_queues,
.ctx = ctx,
};
qio_net_listener_set_name(server->listener, "vhost-user-backend-listener");
qio_net_listener_set_client_func(server->listener,
vu_accept,
server,
NULL);
QTAILQ_INIT(&server->vu_fd_watches);
return true;
}