qemu/hw/i2c/Makefile.objs

common-obj-$(CONFIG_I2C) += core.o smbus.o smbus_eeprom.o
common-obj-$(CONFIG_DDC) += i2c-ddc.o
common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
common-obj-$(CONFIG_ACPI_X86) += smbus_ich9.o
common-obj-$(CONFIG_APM) += pm_smbus.o
common-obj-$(CONFIG_BITBANG_I2C) += bitbang_i2c.o
common-obj-$(CONFIG_EXYNOS4) += exynos4210_i2c.o
common-obj-$(CONFIG_IMX_I2C) += imx_i2c.o
common-obj-$(CONFIG_ASPEED_SOC) += aspeed_i2c.o
obj-$(CONFIG_OMAP) += omap_i2c.o
obj-$(CONFIG_PPC4XX) += ppc4xx_i2c.o
i2c: Add a CONFIG_I2C master switch to the configuration files The i2c core and the at24c EEPROM should only be compiled and linked on the machines that support i2c. Otherwise it's quite strange to see the at24c-eeprom to be "available" on qemu-system-s390x for example. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1516634853-15883-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2018-01-22 18:27:33 +03:00			`common-obj-$(CONFIG_I2C) += core.o smbus.o smbus_eeprom.o`
hw/i2c-ddc.c: Implement DDC I2C slave Implement an I2C slave which implements DDC and returns the EDID data for an attached monitor. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com - Rebased on the current master. - Modified for QOM. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> [PMM: actually wire up the vmstate to dc->vmsd] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> 2016-06-14 17:59:15 +03:00			`common-obj-$(CONFIG_DDC) += i2c-ddc.o`
hw: move target-independent files to subdirectories This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2013-03-01 16:59:19 +04:00			`common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o`
ACPI: split CONFIG_ACPI into 4 pieces As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86 to make it only for x86. ARM doesn't support cpu and memory hotplug, add CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them for target-arm. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> 2015-05-29 13:28:59 +03:00			`common-obj-$(CONFIG_ACPI_X86) += smbus_ich9.o`
hw: move target-independent files to subdirectories This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2013-03-01 16:59:19 +04:00			`common-obj-$(CONFIG_APM) += pm_smbus.o`
hw: move I2C controllers to hw/i2c/, configure via default-configs/ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2013-02-05 16:07:03 +04:00			`common-obj-$(CONFIG_BITBANG_I2C) += bitbang_i2c.o`
			`common-obj-$(CONFIG_EXYNOS4) += exynos4210_i2c.o`
i.MX: Add I2C controller emulator The slave mode is not implemented. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> 2015-09-07 12:39:30 +03:00			`common-obj-$(CONFIG_IMX_I2C) += imx_i2c.o`
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> 2016-06-06 18:59:29 +03:00			`common-obj-$(CONFIG_ASPEED_SOC) += aspeed_i2c.o`
hw: move I2C controllers to hw/i2c/, configure via default-configs/ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2013-02-05 16:07:03 +04:00			`obj-$(CONFIG_OMAP) += omap_i2c.o`
ppc4xx_i2c: Move to hw/i2c Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> 2017-08-20 20:23:05 +03:00			`obj-$(CONFIG_PPC4XX) += ppc4xx_i2c.o`