qemu/Makefile

374 lines
9.3 KiB
Makefile
Raw Normal View History

# Makefile for QEMU.
include config-host.mak
include $(SRC_PATH)/rules.mak
.PHONY: all clean cscope distclean dvi html info install install-doc \
recurse-all speed tar tarbin test
VPATH=$(SRC_PATH):$(SRC_PATH)/hw
CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS)
LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS)
CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
LIBS=
ifdef CONFIG_STATIC
LDFLAGS += -static
endif
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
else
DOCS=
endif
LIBS+=$(AIOLIBS)
ifdef CONFIG_SOLARIS
LIBS+=-lsocket -lnsl -lresolv
endif
ifdef CONFIG_WIN32
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif
all: $(TOOLS) $(DOCS) recurse-all
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
subdir-%:
$(call quiet-command,$(MAKE) -C $* V="$(V)" TARGET_DIR="$*/" all,)
$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
recurse-all: $(SUBDIR_RULES)
#######################################################################
# BLOCK_OBJS is code used by both qemu system emulation and qemu-img
BLOCK_OBJS=cutils.o qemu-malloc.o
BLOCK_OBJS+=block-cow.o block-qcow.o aes.o block-vmdk.o block-cloop.o
BLOCK_OBJS+=block-dmg.o block-bochs.o block-vpc.o block-vvfat.o
BLOCK_OBJS+=block-qcow2.o block-parallels.o block-nbd.o
BLOCK_OBJS+=nbd.o block.o aio.o
ifdef CONFIG_WIN32
BLOCK_OBJS += block-raw-win32.o
else
ifdef CONFIG_AIO
BLOCK_OBJS += posix-aio-compat.o
endif
BLOCK_OBJS += block-raw-posix.o
endif
######################################################################
# libqemu_common.a: Target independent part of system emulation. The
# long term path is to suppress *all* target specific code in case of
# system emulation, i.e. a single QEMU executable should support all
# CPUs and machines.
OBJS=$(BLOCK_OBJS)
OBJS+=readline.o console.o
OBJS+=irq.o
OBJS+=i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
OBJS+=ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
OBJS+=tmp105.o lm832x.o
OBJS+=scsi-disk.o cdrom.o
OBJS+=scsi-generic.o
OBJS+=usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
OBJS+=usb-serial.o usb-net.o
OBJS+=sd.o ssi-sd.o
OBJS+=bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
OBJS+=buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
OBJS+=qemu-char.o aio.o net-checksum.o savevm.o cache-utils.o
ifdef CONFIG_BRLAPI
OBJS+= baum.o
LIBS+=-lbrlapi
endif
ifdef CONFIG_WIN32
OBJS+=tap-win32.o
else
OBJS+=migration-exec.o
endif
AUDIO_OBJS = audio.o noaudio.o wavaudio.o mixeng.o
ifdef CONFIG_SDL
AUDIO_OBJS += sdlaudio.o
endif
ifdef CONFIG_OSS
AUDIO_OBJS += ossaudio.o
endif
ifdef CONFIG_COREAUDIO
AUDIO_OBJS += coreaudio.o
AUDIO_PT = yes
endif
ifdef CONFIG_ALSA
AUDIO_OBJS += alsaaudio.o
endif
ifdef CONFIG_DSOUND
AUDIO_OBJS += dsoundaudio.o
endif
ifdef CONFIG_FMOD
AUDIO_OBJS += fmodaudio.o
audio/audio.o audio/fmodaudio.o: CPPFLAGS := -I$(CONFIG_FMOD_INC) $(CPPFLAGS)
endif
ifdef CONFIG_ESD
AUDIO_PT = yes
AUDIO_PT_INT = yes
AUDIO_OBJS += esdaudio.o
endif
ifdef CONFIG_PA
AUDIO_PT = yes
AUDIO_PT_INT = yes
AUDIO_OBJS += paaudio.o
endif
ifdef AUDIO_PT
LDFLAGS += -pthread
endif
ifdef AUDIO_PT_INT
AUDIO_OBJS += audio_pt_int.o
endif
AUDIO_OBJS+= wavcapture.o
OBJS+=$(addprefix audio/, $(AUDIO_OBJS))
OBJS+=keymaps.o
ifdef CONFIG_SDL
OBJS+=sdl.o x_keymap.o
endif
ifdef CONFIG_CURSES
OBJS+=curses.o
endif
OBJS+=vnc.o d3des.o
Move TLS auth into separate file ("Daniel P. Berrange") This patch refactors the existing TLS code to make the main VNC code more managable. The code moves to two new files - vnc-tls.c: generic helpers for TLS handshake & credential setup - vnc-auth-vencrypt.c: the actual VNC TLS authentication mechanism. The reason for this split is that there are other TLS based auth mechanisms which we may like to use in the future. These can all share the same vnc-tls.c routines. In addition this will facilitate anyone who may want to port the vnc-tls.c file to allow for choice of GNUTLS & NSS for impl. The TLS state is moved out of the VncState struct, and into a separate VncStateTLS struct, defined in vnc-tls.h. This is then referenced from the main VncState. End size of the struct is the same, but it keeps things a little more managable. The vnc.h file gains a bunch more function prototypes, for functions in vnc.c that were previously static, but now need to be accessed from the separate auth code files. The only TLS related code still in the main vl.c is the command line argument handling / setup, and the low level I/O routines calling gnutls_send/recv. Makefile | 11 b/vnc-auth-vencrypt.c | 167 ++++++++++++++ b/vnc-auth-vencrypt.h | 33 ++ b/vnc-tls.c | 414 +++++++++++++++++++++++++++++++++++ b/vnc-tls.h | 70 ++++++ vnc.c | 581 +++----------------------------------------------- vnc.h | 76 ++++-- 7 files changed, 780 insertions(+), 572 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6723 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:23 +03:00
ifdef CONFIG_VNC_TLS
OBJS+=vnc-tls.o vnc-auth-vencrypt.o
endif
ifdef CONFIG_COCOA
OBJS+=cocoa.o
endif
ifdef CONFIG_SLIRP
CPPFLAGS+=-I$(SRC_PATH)/slirp
SLIRP_OBJS=cksum.o if.o ip_icmp.o ip_input.o ip_output.o \
slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o \
tcp_subr.o tcp_timer.o udp.o bootp.o debug.o tftp.o
OBJS+=$(addprefix slirp/, $(SLIRP_OBJS))
endif
LIBS+=$(VDE_LIBS)
cocoa.o: cocoa.m
keymaps.o: keymaps.c keymaps.h
sdl.o: sdl.c keymaps.h sdl_keysym.h
sdl.o audio/sdlaudio.o: CFLAGS += $(SDL_CFLAGS)
Move TLS auth into separate file ("Daniel P. Berrange") This patch refactors the existing TLS code to make the main VNC code more managable. The code moves to two new files - vnc-tls.c: generic helpers for TLS handshake & credential setup - vnc-auth-vencrypt.c: the actual VNC TLS authentication mechanism. The reason for this split is that there are other TLS based auth mechanisms which we may like to use in the future. These can all share the same vnc-tls.c routines. In addition this will facilitate anyone who may want to port the vnc-tls.c file to allow for choice of GNUTLS & NSS for impl. The TLS state is moved out of the VncState struct, and into a separate VncStateTLS struct, defined in vnc-tls.h. This is then referenced from the main VncState. End size of the struct is the same, but it keeps things a little more managable. The vnc.h file gains a bunch more function prototypes, for functions in vnc.c that were previously static, but now need to be accessed from the separate auth code files. The only TLS related code still in the main vl.c is the command line argument handling / setup, and the low level I/O routines calling gnutls_send/recv. Makefile | 11 b/vnc-auth-vencrypt.c | 167 ++++++++++++++ b/vnc-auth-vencrypt.h | 33 ++ b/vnc-tls.c | 414 +++++++++++++++++++++++++++++++++++ b/vnc-tls.h | 70 ++++++ vnc.c | 581 +++----------------------------------------------- vnc.h | 76 ++++-- 7 files changed, 780 insertions(+), 572 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6723 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:23 +03:00
vnc.h: vnc-tls.h vnc-auth-vencrypt.h keymaps.h
vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h
vnc.o: CFLAGS += $(CONFIG_VNC_TLS_CFLAGS)
Move TLS auth into separate file ("Daniel P. Berrange") This patch refactors the existing TLS code to make the main VNC code more managable. The code moves to two new files - vnc-tls.c: generic helpers for TLS handshake & credential setup - vnc-auth-vencrypt.c: the actual VNC TLS authentication mechanism. The reason for this split is that there are other TLS based auth mechanisms which we may like to use in the future. These can all share the same vnc-tls.c routines. In addition this will facilitate anyone who may want to port the vnc-tls.c file to allow for choice of GNUTLS & NSS for impl. The TLS state is moved out of the VncState struct, and into a separate VncStateTLS struct, defined in vnc-tls.h. This is then referenced from the main VncState. End size of the struct is the same, but it keeps things a little more managable. The vnc.h file gains a bunch more function prototypes, for functions in vnc.c that were previously static, but now need to be accessed from the separate auth code files. The only TLS related code still in the main vl.c is the command line argument handling / setup, and the low level I/O routines calling gnutls_send/recv. Makefile | 11 b/vnc-auth-vencrypt.c | 167 ++++++++++++++ b/vnc-auth-vencrypt.h | 33 ++ b/vnc-tls.c | 414 +++++++++++++++++++++++++++++++++++ b/vnc-tls.h | 70 ++++++ vnc.c | 581 +++----------------------------------------------- vnc.h | 76 ++++-- 7 files changed, 780 insertions(+), 572 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6723 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:23 +03:00
vnc-tls.o: vnc-tls.c vnc.h
vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h
curses.o: curses.c keymaps.h curses_keys.h
bt-host.o: CFLAGS += $(CONFIG_BLUEZ_CFLAGS)
libqemu_common.a: $(OBJS)
#######################################################################
# USER_OBJS is code used by qemu userspace emulation
USER_OBJS=cutils.o cache-utils.o
libqemu_user.a: $(USER_OBJS)
######################################################################
qemu-img$(EXESUF): qemu-img.o qemu-tool.o osdep.o $(BLOCK_OBJS)
qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o osdep.o $(BLOCK_OBJS)
qemu-img$(EXESUF) qemu-nbd$(EXESUF): LIBS += -lz
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d
$(MAKE) -C tests clean
for d in $(TARGET_DIRS); do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
distclean: clean
rm -f config-host.mak config-host.h $(DOCS)
rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
for d in $(TARGET_DIRS); do \
rm -rf $$d || exit 1 ; \
done
KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
ar de en-us fi fr-be hr it lv nl pl ru th \
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr
ifdef INSTALL_BLOBS
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
bamboo.dtb
else
BLOBS=
endif
install-doc: $(DOCS)
mkdir -p "$(DESTDIR)$(docdir)"
$(INSTALL) -m 644 qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
ifndef CONFIG_WIN32
mkdir -p "$(DESTDIR)$(mandir)/man1"
$(INSTALL) -m 644 qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
mkdir -p "$(DESTDIR)$(mandir)/man8"
$(INSTALL) -m 644 qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
install: all $(if $(BUILD_DOCS),install-doc)
mkdir -p "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
$(INSTALL) -m 755 -s $(TOOLS) "$(DESTDIR)$(bindir)"
endif
ifneq ($(BLOBS),)
mkdir -p "$(DESTDIR)$(datadir)"
set -e; for x in $(BLOBS); do \
$(INSTALL) -m 644 $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
done
endif
ifndef CONFIG_WIN32
mkdir -p "$(DESTDIR)$(datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
$(INSTALL) -m 644 $(SRC_PATH)/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
done
endif
for d in $(TARGET_DIRS); do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
# various test targets
test speed: all
$(MAKE) -C tests $@
TAGS:
etags *.[ch] tests/*.[ch]
cscope:
rm -f ./cscope.*
find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
cscope -b
# documentation
%.html: %.texi
texi2html -monolithic -number $<
%.info: %.texi
makeinfo $< -o $@
%.dvi: %.texi
texi2dvi $<
qemu.1: qemu-doc.texi
$(SRC_PATH)/texi2pod.pl $< qemu.pod
pod2man --section=1 --center=" " --release=" " qemu.pod > $@
qemu-img.1: qemu-img.texi
$(SRC_PATH)/texi2pod.pl $< qemu-img.pod
pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@
qemu-nbd.8: qemu-nbd.texi
$(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod
pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@
info: qemu-doc.info qemu-tech.info
dvi: qemu-doc.dvi qemu-tech.dvi
html: qemu-doc.html qemu-tech.html
qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
# tar release (use 'make -k tar' on a checkouted tree)
tar:
rm -rf /tmp/$(FILE)
cp -r . /tmp/$(FILE)
cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
rm -rf /tmp/$(FILE)
# generate a binary distribution
tarbin:
cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
$(bindir)/qemu \
$(bindir)/qemu-system-x86_64 \
$(bindir)/qemu-system-arm \
$(bindir)/qemu-system-cris \
$(bindir)/qemu-system-m68k \
$(bindir)/qemu-system-mips \
$(bindir)/qemu-system-mipsel \
$(bindir)/qemu-system-mips64 \
$(bindir)/qemu-system-mips64el \
$(bindir)/qemu-system-ppc \
$(bindir)/qemu-system-ppcemb \
$(bindir)/qemu-system-ppc64 \
$(bindir)/qemu-system-sh4 \
$(bindir)/qemu-system-sh4eb \
$(bindir)/qemu-system-sparc \
$(bindir)/qemu-i386 \
$(bindir)/qemu-x86_64 \
$(bindir)/qemu-alpha \
$(bindir)/qemu-arm \
$(bindir)/qemu-armeb \
$(bindir)/qemu-cris \
$(bindir)/qemu-m68k \
$(bindir)/qemu-mips \
$(bindir)/qemu-mipsel \
$(bindir)/qemu-ppc \
$(bindir)/qemu-ppc64 \
$(bindir)/qemu-ppc64abi32 \
$(bindir)/qemu-sh4 \
$(bindir)/qemu-sh4eb \
$(bindir)/qemu-sparc \
$(bindir)/qemu-sparc64 \
$(bindir)/qemu-sparc32plus \
$(bindir)/qemu-img \
$(bindir)/qemu-nbd \
$(datadir)/bios.bin \
$(datadir)/vgabios.bin \
$(datadir)/vgabios-cirrus.bin \
$(datadir)/ppc_rom.bin \
$(datadir)/video.x \
$(datadir)/openbios-sparc32 \
$(datadir)/openbios-sparc64 \
$(datadir)/openbios-ppc \
$(datadir)/pxe-ne2k_pci.bin \
$(datadir)/pxe-rtl8139.bin \
$(datadir)/pxe-pcnet.bin \
$(datadir)/pxe-e1000.bin \
$(docdir)/qemu-doc.html \
$(docdir)/qemu-tech.html \
$(mandir)/man1/qemu.1 \
$(mandir)/man1/qemu-img.1 \
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
-include $(wildcard *.d audio/*.d slirp/*.d)