qemu/net/hub.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

348 lines
8.2 KiB
C
Raw Normal View History

/*
* Hub net client
*
* Copyright IBM, Corp. 2012
*
* Authors:
* Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qemu/osdep.h"
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
#include "qapi/error.h"
#include "monitor/monitor.h"
#include "net/net.h"
#include "clients.h"
#include "hub.h"
#include "qemu/iov.h"
#include "qemu/error-report.h"
#include "sysemu/qtest.h"
/*
* A hub broadcasts incoming packets to all its ports except the source port.
* Hubs can be used to provide independent emulated network segments.
*/
typedef struct NetHub NetHub;
typedef struct NetHubPort {
NetClientState nc;
QLIST_ENTRY(NetHubPort) next;
NetHub *hub;
int id;
} NetHubPort;
struct NetHub {
int id;
QLIST_ENTRY(NetHub) next;
int num_ports;
QLIST_HEAD(, NetHubPort) ports;
};
static QLIST_HEAD(, NetHub) hubs = QLIST_HEAD_INITIALIZER(&hubs);
static ssize_t net_hub_receive(NetHub *hub, NetHubPort *source_port,
const uint8_t *buf, size_t len)
{
NetHubPort *port;
QLIST_FOREACH(port, &hub->ports, next) {
if (port == source_port) {
continue;
}
qemu_send_packet(&port->nc, buf, len);
}
return len;
}
static ssize_t net_hub_receive_iov(NetHub *hub, NetHubPort *source_port,
const struct iovec *iov, int iovcnt)
{
NetHubPort *port;
ssize_t len = iov_size(iov, iovcnt);
QLIST_FOREACH(port, &hub->ports, next) {
if (port == source_port) {
continue;
}
qemu_sendv_packet(&port->nc, iov, iovcnt);
}
return len;
}
static NetHub *net_hub_new(int id)
{
NetHub *hub;
hub = g_malloc(sizeof(*hub));
hub->id = id;
hub->num_ports = 0;
QLIST_INIT(&hub->ports);
QLIST_INSERT_HEAD(&hubs, hub, next);
return hub;
}
static bool net_hub_port_can_receive(NetClientState *nc)
{
NetHubPort *port;
NetHubPort *src_port = DO_UPCAST(NetHubPort, nc, nc);
NetHub *hub = src_port->hub;
QLIST_FOREACH(port, &hub->ports, next) {
if (port == src_port) {
continue;
}
if (qemu_can_send_packet(&port->nc)) {
return true;
}
}
return false;
}
static ssize_t net_hub_port_receive(NetClientState *nc,
const uint8_t *buf, size_t len)
{
NetHubPort *port = DO_UPCAST(NetHubPort, nc, nc);
return net_hub_receive(port->hub, port, buf, len);
}
static ssize_t net_hub_port_receive_iov(NetClientState *nc,
const struct iovec *iov, int iovcnt)
{
NetHubPort *port = DO_UPCAST(NetHubPort, nc, nc);
return net_hub_receive_iov(port->hub, port, iov, iovcnt);
}
static void net_hub_port_cleanup(NetClientState *nc)
{
NetHubPort *port = DO_UPCAST(NetHubPort, nc, nc);
QLIST_REMOVE(port, next);
}
static NetClientInfo net_hub_port_info = {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
.type = NET_CLIENT_DRIVER_HUBPORT,
.size = sizeof(NetHubPort),
.can_receive = net_hub_port_can_receive,
.receive = net_hub_port_receive,
.receive_iov = net_hub_port_receive_iov,
.cleanup = net_hub_port_cleanup,
};
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
static NetHubPort *net_hub_port_new(NetHub *hub, const char *name,
NetClientState *hubpeer)
{
NetClientState *nc;
NetHubPort *port;
int id = hub->num_ports++;
char default_name[128];
if (!name) {
snprintf(default_name, sizeof(default_name),
"hub%dport%d", hub->id, id);
name = default_name;
}
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
nc = qemu_new_net_client(&net_hub_port_info, hubpeer, "hub", name);
port = DO_UPCAST(NetHubPort, nc, nc);
port->id = id;
port->hub = hub;
QLIST_INSERT_HEAD(&hub->ports, port, next);
return port;
}
/**
* Create a port on a given hub
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
* @hub_id: Number of the hub
* @name: Net client name or NULL for default name.
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
* @hubpeer: Peer to use (if "netdev=id" has been specified)
*
* If there is no existing hub with the given id then a new hub is created.
*/
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
NetClientState *net_hub_add_port(int hub_id, const char *name,
NetClientState *hubpeer)
{
NetHub *hub;
NetHubPort *port;
QLIST_FOREACH(hub, &hubs, next) {
if (hub->id == hub_id) {
break;
}
}
if (!hub) {
hub = net_hub_new(hub_id);
}
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
port = net_hub_port_new(hub, name, hubpeer);
return &port->nc;
}
/**
* Find a available port on a hub; otherwise create one new port
*/
NetClientState *net_hub_port_find(int hub_id)
{
NetHub *hub;
NetHubPort *port;
NetClientState *nc;
QLIST_FOREACH(hub, &hubs, next) {
if (hub->id == hub_id) {
QLIST_FOREACH(port, &hub->ports, next) {
nc = port->nc.peer;
if (!nc) {
return &(port->nc);
}
}
break;
}
}
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
nc = net_hub_add_port(hub_id, NULL, NULL);
return nc;
}
/**
* Print hub configuration
*/
void net_hub_info(Monitor *mon)
{
NetHub *hub;
NetHubPort *port;
QLIST_FOREACH(hub, &hubs, next) {
monitor_printf(mon, "hub %d\n", hub->id);
QLIST_FOREACH(port, &hub->ports, next) {
monitor_printf(mon, " \\ %s", port->nc.name);
if (port->nc.peer) {
monitor_printf(mon, ": ");
print_net_client(mon, port->nc.peer);
} else {
monitor_printf(mon, "\n");
}
}
}
}
/**
* Get the hub id that a client is connected to
*
* @id: Pointer for hub id output, may be NULL
*/
int net_hub_id_for_client(NetClientState *nc, int *id)
{
NetHubPort *port;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_HUBPORT) {
port = DO_UPCAST(NetHubPort, nc, nc);
} else if (nc->peer != NULL && nc->peer->info->type ==
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NET_CLIENT_DRIVER_HUBPORT) {
port = DO_UPCAST(NetHubPort, nc, nc->peer);
} else {
return -ENOENT;
}
if (id) {
*id = port->hub->id;
}
return 0;
}
int net_init_hubport(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
const NetdevHubPortOptions *hubport;
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
NetClientState *hubpeer = NULL;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(netdev->type == NET_CLIENT_DRIVER_HUBPORT);
assert(!peer);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
hubport = &netdev->u.hubport;
if (hubport->netdev) {
net: Allow hubports to connect to other netdevs QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-15 22:50:55 +03:00
hubpeer = qemu_find_netdev(hubport->netdev);
if (!hubpeer) {
error_setg(errp, "netdev '%s' not found", hubport->netdev);
return -1;
}
}
net_hub_add_port(hubport->hubid, name, hubpeer);
return 0;
}
/**
* Warn if hub configurations are likely wrong
*/
void net_hub_check_clients(void)
{
NetHub *hub;
NetHubPort *port;
NetClientState *peer;
QLIST_FOREACH(hub, &hubs, next) {
int has_nic = 0, has_host_dev = 0;
QLIST_FOREACH(port, &hub->ports, next) {
peer = port->nc.peer;
if (!peer) {
warn_report("hub port %s has no peer", port->nc.name);
continue;
}
switch (peer->info->type) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
case NET_CLIENT_DRIVER_NIC:
has_nic = 1;
break;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
case NET_CLIENT_DRIVER_USER:
case NET_CLIENT_DRIVER_TAP:
case NET_CLIENT_DRIVER_SOCKET:
qapi: net: add stream and dgram netdevs Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-21 12:09:11 +03:00
case NET_CLIENT_DRIVER_STREAM:
case NET_CLIENT_DRIVER_DGRAM:
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
case NET_CLIENT_DRIVER_VDE:
case NET_CLIENT_DRIVER_VHOST_USER:
has_host_dev = 1;
break;
default:
break;
}
}
if (has_host_dev && !has_nic) {
warn_report("hub %d with no nics", hub->id);
}
if (has_nic && !has_host_dev && !qtest_enabled()) {
warn_report("hub %d is not connected to host network", hub->id);
}
}
}
bool net_hub_flush(NetClientState *nc)
{
NetHubPort *port;
NetHubPort *source_port = DO_UPCAST(NetHubPort, nc, nc);
int ret = 0;
QLIST_FOREACH(port, &source_port->hub->ports, next) {
if (port != source_port) {
ret += qemu_net_queue_flush(port->nc.incoming_queue);
}
}
return ret ? true : false;
}