qemu/hw/usb/dev-wacom.c

384 lines
10 KiB
C
Raw Normal View History

/*
* Wacom PenPartner USB tablet emulation.
*
* Copyright (c) 2006 Openedhand Ltd.
* Author: Andrzej Zaborowski <balrog@zabor.org>
*
* Based on hw/usb-hid.c:
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "ui/console.h"
#include "hw/usb.h"
#include "hw/usb/hid.h"
#include "migration/vmstate.h"
#include "qemu/module.h"
#include "desc.h"
#include "qom/object.h"
/* Interface requests */
#define WACOM_GET_REPORT 0x2101
#define WACOM_SET_REPORT 0x2109
struct USBWacomState {
USBDevice dev;
USBEndpoint *intr;
QEMUPutMouseEntry *eh_entry;
int dx, dy, dz, buttons_state;
int x, y;
int mouse_grabbed;
enum {
WACOM_MODE_HID = 1,
WACOM_MODE_WACOM = 2,
} mode;
uint8_t idle;
int changed;
};
#define TYPE_USB_WACOM "usb-wacom-tablet"
OBJECT_DECLARE_SIMPLE_TYPE(USBWacomState, USB_WACOM)
enum {
STR_MANUFACTURER = 1,
STR_PRODUCT,
STR_SERIALNUMBER,
};
static const USBDescStrings desc_strings = {
[STR_MANUFACTURER] = "QEMU",
[STR_PRODUCT] = "Wacom PenPartner",
[STR_SERIALNUMBER] = "1",
};
static const USBDescIface desc_iface_wacom = {
.bInterfaceNumber = 0,
.bNumEndpoints = 1,
.bInterfaceClass = USB_CLASS_HID,
.bInterfaceSubClass = 0x01, /* boot */
.bInterfaceProtocol = 0x02,
.ndesc = 1,
.descs = (USBDescOther[]) {
{
/* HID descriptor */
.data = (uint8_t[]) {
0x09, /* u8 bLength */
USB_DT_HID, /* u8 bDescriptorType */
0x01, 0x10, /* u16 HID_class */
0x00, /* u8 country_code */
0x01, /* u8 num_descriptors */
USB_DT_REPORT, /* u8 type: Report */
0x6e, 0, /* u16 len */
},
},
},
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = 8,
.bInterval = 0x0a,
},
},
};
static const USBDescDevice desc_device_wacom = {
.bcdUSB = 0x0110,
.bMaxPacketSize0 = 8,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.bmAttributes = USB_CFG_ATT_ONE,
.bMaxPower = 40,
.nif = 1,
.ifs = &desc_iface_wacom,
},
},
};
static const USBDesc desc_wacom = {
.id = {
.idVendor = 0x056a,
.idProduct = 0x0000,
.bcdDevice = 0x4210,
.iManufacturer = STR_MANUFACTURER,
.iProduct = STR_PRODUCT,
.iSerialNumber = STR_SERIALNUMBER,
},
.full = &desc_device_wacom,
.str = desc_strings,
};
static void usb_mouse_event(void *opaque,
int dx1, int dy1, int dz1, int buttons_state)
{
USBWacomState *s = opaque;
s->dx += dx1;
s->dy += dy1;
s->dz += dz1;
s->buttons_state = buttons_state;
s->changed = 1;
usb_wakeup(s->intr, 0);
}
static void usb_wacom_event(void *opaque,
int x, int y, int dz, int buttons_state)
{
USBWacomState *s = opaque;
/* scale to Penpartner resolution */
s->x = (x * 5040 / 0x7FFF);
s->y = (y * 3780 / 0x7FFF);
s->dz += dz;
s->buttons_state = buttons_state;
s->changed = 1;
usb_wakeup(s->intr, 0);
}
static inline int int_clamp(int val, int vmin, int vmax)
{
if (val < vmin)
return vmin;
else if (val > vmax)
return vmax;
else
return val;
}
static int usb_mouse_poll(USBWacomState *s, uint8_t *buf, int len)
{
int dx, dy, dz, b, l;
if (!s->mouse_grabbed) {
s->eh_entry = qemu_add_mouse_event_handler(usb_mouse_event, s, 0,
"QEMU PenPartner tablet");
qemu_activate_mouse_event_handler(s->eh_entry);
s->mouse_grabbed = 1;
}
dx = int_clamp(s->dx, -128, 127);
dy = int_clamp(s->dy, -128, 127);
dz = int_clamp(s->dz, -128, 127);
s->dx -= dx;
s->dy -= dy;
s->dz -= dz;
b = 0;
if (s->buttons_state & MOUSE_EVENT_LBUTTON)
b |= 0x01;
if (s->buttons_state & MOUSE_EVENT_RBUTTON)
b |= 0x02;
if (s->buttons_state & MOUSE_EVENT_MBUTTON)
b |= 0x04;
buf[0] = b;
buf[1] = dx;
buf[2] = dy;
l = 3;
if (len >= 4) {
buf[3] = dz;
l = 4;
}
return l;
}
static int usb_wacom_poll(USBWacomState *s, uint8_t *buf, int len)
{
int b;
if (!s->mouse_grabbed) {
s->eh_entry = qemu_add_mouse_event_handler(usb_wacom_event, s, 1,
"QEMU PenPartner tablet");
qemu_activate_mouse_event_handler(s->eh_entry);
s->mouse_grabbed = 1;
}
b = 0;
if (s->buttons_state & MOUSE_EVENT_LBUTTON)
b |= 0x01;
if (s->buttons_state & MOUSE_EVENT_RBUTTON)
b |= 0x40;
if (s->buttons_state & MOUSE_EVENT_MBUTTON)
b |= 0x20; /* eraser */
if (len < 7)
return 0;
buf[0] = s->mode;
buf[5] = 0x00 | (b & 0xf0);
buf[1] = s->x & 0xff;
buf[2] = s->x >> 8;
buf[3] = s->y & 0xff;
buf[4] = s->y >> 8;
if (b & 0x3f) {
buf[6] = 0;
} else {
buf[6] = (unsigned char) -127;
}
return 7;
}
static void usb_wacom_handle_reset(USBDevice *dev)
{
USBWacomState *s = (USBWacomState *) dev;
s->dx = 0;
s->dy = 0;
s->dz = 0;
s->x = 0;
s->y = 0;
s->buttons_state = 0;
s->mode = WACOM_MODE_HID;
}
static void usb_wacom_handle_control(USBDevice *dev, USBPacket *p,
int request, int value, int index, int length, uint8_t *data)
{
USBWacomState *s = (USBWacomState *) dev;
int ret;
ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
if (ret >= 0) {
return;
}
switch (request) {
case WACOM_SET_REPORT:
if (s->mouse_grabbed) {
qemu_remove_mouse_event_handler(s->eh_entry);
s->mouse_grabbed = 0;
}
s->mode = data[0];
break;
case WACOM_GET_REPORT:
data[0] = 0;
data[1] = s->mode;
p->actual_length = 2;
break;
/* USB HID requests */
case HID_GET_REPORT:
if (s->mode == WACOM_MODE_HID)
p->actual_length = usb_mouse_poll(s, data, length);
else if (s->mode == WACOM_MODE_WACOM)
p->actual_length = usb_wacom_poll(s, data, length);
break;
case HID_GET_IDLE:
data[0] = s->idle;
p->actual_length = 1;
break;
case HID_SET_IDLE:
s->idle = (uint8_t) (value >> 8);
break;
default:
p->status = USB_RET_STALL;
break;
}
}
static void usb_wacom_handle_data(USBDevice *dev, USBPacket *p)
{
USBWacomState *s = (USBWacomState *) dev;
uint8_t buf[p->iov.size];
int len = 0;
switch (p->pid) {
case USB_TOKEN_IN:
if (p->ep->nr == 1) {
if (!(s->changed || s->idle)) {
p->status = USB_RET_NAK;
return;
}
s->changed = 0;
if (s->mode == WACOM_MODE_HID)
len = usb_mouse_poll(s, buf, p->iov.size);
else if (s->mode == WACOM_MODE_WACOM)
len = usb_wacom_poll(s, buf, p->iov.size);
usb_packet_copy(p, buf, len);
break;
}
/* Fall through. */
case USB_TOKEN_OUT:
default:
p->status = USB_RET_STALL;
}
}
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 18:29:24 +03:00
static void usb_wacom_unrealize(USBDevice *dev)
{
USBWacomState *s = (USBWacomState *) dev;
if (s->mouse_grabbed) {
qemu_remove_mouse_event_handler(s->eh_entry);
s->mouse_grabbed = 0;
}
}
static void usb_wacom_realize(USBDevice *dev, Error **errp)
{
USBWacomState *s = USB_WACOM(dev);
usb_desc_create_serial(dev);
usb_desc_init(dev);
s->intr = usb_ep_get(dev, USB_TOKEN_IN, 1);
s->changed = 1;
}
static const VMStateDescription vmstate_usb_wacom = {
.name = "usb-wacom",
.unmigratable = 1,
};
static void usb_wacom_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
uc->product_desc = "QEMU PenPartner Tablet";
uc->usb_desc = &desc_wacom;
uc->realize = usb_wacom_realize;
uc->handle_reset = usb_wacom_handle_reset;
uc->handle_control = usb_wacom_handle_control;
uc->handle_data = usb_wacom_handle_data;
uc->unrealize = usb_wacom_unrealize;
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
dc->desc = "QEMU PenPartner Tablet";
dc->vmsd = &vmstate_usb_wacom;
}
static const TypeInfo wacom_info = {
.name = TYPE_USB_WACOM,
.parent = TYPE_USB_DEVICE,
.instance_size = sizeof(USBWacomState),
.class_init = usb_wacom_class_init,
};
static void usb_wacom_register_types(void)
{
type_register_static(&wacom_info);
usb_legacy_register(TYPE_USB_WACOM, "wacom-tablet", NULL);
}
type_init(usb_wacom_register_types)