qemu/hw/openrisc/Kconfig

config OR1K_SIM
    bool
    default y
    depends on OPENRISC
    select DEVICE_TREE
    select SERIAL
    select OPENCORES_ETH
    select OMPIC
    select SPLIT_IRQ

config OR1K_VIRT
    bool
    default y
    depends on OPENRISC
    imply PCI_DEVICES
    imply VIRTIO_VGA
    imply TEST_DEVICES
    select DEVICE_TREE
    select PCI
    select PCI_EXPRESS_GENERIC_BRIDGE
    select GOLDFISH_RTC
    select SERIAL
    select SIFIVE_TEST
    select VIRTIO_MMIO
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* \| sort -u`; do set fnord `git grep -lw $i -- 'hw//Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $ fi done sed -i '$d' hw//Kconfig for i in hw/; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2019-01-23 09:56:00 +03:00			`config OR1K_SIM`
			`bool`
openrisc: switch boards to "default y" Some targets use "default y" for boards to filter out those that require TCG. For consistency we are switching all other targets to do the same. Continue with OpenRISC. No changes to generated config-devices.mak file. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2024-01-25 15:36:37 +03:00			`default y`
			`depends on OPENRISC`
kconfig: express dependency of individual boards on libfdt Now that boards are enabled by default and the "CONFIG_FOO=y" entries are gone from configs/devices/, there cannot be any more a conflicts between the default contents of configs/devices/ and a failed "depends on" clause. With this change, each individual board or target can express whether it needs FDT. It can then include the common code in the build via "select DEVICE_TREE", which will also as tell meson to link with libfdt. This allows building non-microvm x86 emulators without having libfdt available. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2024-04-30 22:08:15 +03:00			`select DEVICE_TREE`
or1k-softmmu.mak: express dependencies with Kconfig %-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2019-01-29 14:16:27 +03:00			`select SERIAL`
			`select OPENCORES_ETH`
			`select OMPIC`
hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs openrisc_sim_net_init() attempts to connect the IRQ line from the ethernet device to both CPUs in an SMP configuration by simply caling sysbus_connect_irq() for it twice. This doesn't work, because the second connection simply overrides the first. Fix this by creating a TYPE_SPLIT_IRQ to split the IRQ in the SMP case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Message-id: 20201127225127.14770-2-peter.maydell@linaro.org 2020-11-28 01:51:25 +03:00			`select SPLIT_IRQ`
hw/openrisc: Add the OpenRISC virtual machine This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This platform allows for a convenient CI platform for toolchain, software ports and the OpenRISC linux kernel port. Much of this has been sourced from the m68k and riscv virt platforms. The platform provides: - OpenRISC SMP with up to 4 cpus - A virtio bus with up to 8 devices - Standard ns16550a serial - Goldfish RTC - SiFive TEST device for poweroff and reboot - Generated Device Tree to automatically configure the guest kernel Signed-off-by: Stafford Horne <shorne@gmail.com> 2022-05-20 16:38:13 +03:00
			`config OR1K_VIRT`
			`bool`
openrisc: switch boards to "default y" Some targets use "default y" for boards to filter out those that require TCG. For consistency we are switching all other targets to do the same. Continue with OpenRISC. No changes to generated config-devices.mak file. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2024-01-25 15:36:37 +03:00			`default y`
			`depends on OPENRISC`
hw/openrisc: Add PCI bus support to virt This is mostly borrowed from xtensa and riscv as examples. The create_pcie_irq_map swizzle function is almost and exact copy but here we use a single cell interrupt, possibly we can make this generic. Signed-off-by: Stafford Horne <shorne@gmail.com> 2022-06-12 15:22:53 +03:00			`imply PCI_DEVICES`
hw/openrisc: Add the OpenRISC virtual machine This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This platform allows for a convenient CI platform for toolchain, software ports and the OpenRISC linux kernel port. Much of this has been sourced from the m68k and riscv virt platforms. The platform provides: - OpenRISC SMP with up to 4 cpus - A virtio bus with up to 8 devices - Standard ns16550a serial - Goldfish RTC - SiFive TEST device for poweroff and reboot - Generated Device Tree to automatically configure the guest kernel Signed-off-by: Stafford Horne <shorne@gmail.com> 2022-05-20 16:38:13 +03:00			`imply VIRTIO_VGA`
			`imply TEST_DEVICES`
kconfig: express dependency of individual boards on libfdt Now that boards are enabled by default and the "CONFIG_FOO=y" entries are gone from configs/devices/, there cannot be any more a conflicts between the default contents of configs/devices/ and a failed "depends on" clause. With this change, each individual board or target can express whether it needs FDT. It can then include the common code in the build via "select DEVICE_TREE", which will also as tell meson to link with libfdt. This allows building non-microvm x86 emulators without having libfdt available. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2024-04-30 22:08:15 +03:00			`select DEVICE_TREE`
hw/openrisc: Add PCI bus support to virt This is mostly borrowed from xtensa and riscv as examples. The create_pcie_irq_map swizzle function is almost and exact copy but here we use a single cell interrupt, possibly we can make this generic. Signed-off-by: Stafford Horne <shorne@gmail.com> 2022-06-12 15:22:53 +03:00			`select PCI`
			`select PCI_EXPRESS_GENERIC_BRIDGE`
hw/openrisc: Add the OpenRISC virtual machine This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This platform allows for a convenient CI platform for toolchain, software ports and the OpenRISC linux kernel port. Much of this has been sourced from the m68k and riscv virt platforms. The platform provides: - OpenRISC SMP with up to 4 cpus - A virtio bus with up to 8 devices - Standard ns16550a serial - Goldfish RTC - SiFive TEST device for poweroff and reboot - Generated Device Tree to automatically configure the guest kernel Signed-off-by: Stafford Horne <shorne@gmail.com> 2022-05-20 16:38:13 +03:00			`select GOLDFISH_RTC`
			`select SERIAL`
			`select SIFIVE_TEST`
			`select VIRTIO_MMIO`