qemu/include/hw/ppc/pnv_xive.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

169 lines
4.2 KiB
C
Raw Normal View History

ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
/*
* QEMU PowerPC XIVE interrupt controller model
*
* Copyright (c) 2017-2019, IBM Corporation.
*
* This code is licensed under the GPL version 2 or later. See the
* COPYING file in the top-level directory.
*/
#ifndef PPC_PNV_XIVE_H
#define PPC_PNV_XIVE_H
#include "hw/ppc/pnv.h"
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
#include "hw/ppc/xive.h"
#include "qom/object.h"
ppc/pnv: Add a XIVE2 controller to the POWER10 chip The XIVE2 interrupt controller of the POWER10 processor follows the same logic than on POWER9 but the HW interface has been largely reviewed. It has a new register interface, different BARs, extra VSDs, new layout for the XIVE2 structures, and a set of new features which are described below. This is a model of the POWER10 XIVE2 interrupt controller for the PowerNV machine. It focuses primarily on the needs of the skiboot firmware but some initial hypervisor support is implemented for KVM use (escalation). Support for new features will be implemented in time and will require new support from the OS. * XIVE2 BARS The interrupt controller BARs have a different layout outlined below. Each sub-engine has now own its range and the indirect TIMA access was replaced with a set of pages, one per CPU, under the IC BAR: - IC BAR (Interrupt Controller) . 4 pages, one per sub-engine . 128 indirect TIMA pages - TM BAR (Thread Interrupt Management Area) . 4 pages - ESB BAR (ESB pages for IPIs) . up to 1TB - END BAR (ESB pages for ENDs) . up to 2TB - NVC BAR (Notification Virtual Crowd) . up to 128 - NVPG BAR (Notification Virtual Process and Group) . up to 1TB - Direct mapped Thread Context Area (reads & writes) OPAL does not use the grouping and crowd capability. * Virtual Structure Tables XIVE2 adds new tables types and also changes the field layout of the END and NVP Virtualization Structure Descriptors. - EAS - END new layout - NVT was splitted in : . NVP (Processor), 32B . NVG (Group), 32B . NVC (Crowd == P9 block group) 32B - IC for remote configuration - SYNC for cache injection - ERQ for event input queue The setup is slighly different on XIVE2 because the indexing has changed for some of the tables, block ID or the chip topology ID can be used. * XIVE2 features SCOM and MMIO registers have a new layout and XIVE2 adds a new global capability and configuration registers. The lowlevel hardware offers a set of new features among which : - a configurable number of priorities : 1 - 8 - StoreEOI with load-after-store ordering is activated by default - Gen2 TIMA layout - A P9-compat mode, or Gen1, TIMA toggle bit for SW compatibility - increase to 24bit for VP number Other features will have some impact on the Hypervisor and guest OS when activated, but this is not required for initial support of the controller. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-02 08:51:38 +03:00
#include "hw/ppc/xive2.h"
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
#define TYPE_PNV_XIVE "pnv-xive"
OBJECT_DECLARE_TYPE(PnvXive, PnvXiveClass,
PNV_XIVE)
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
#define XIVE_BLOCK_MAX 16
#define XIVE_TABLE_BLK_MAX 16 /* Block Scope Table (0-15) */
#define XIVE_TABLE_MIG_MAX 16 /* Migration Register Table (1-15) */
#define XIVE_TABLE_VDT_MAX 16 /* VDT Domain Table (0-15) */
#define XIVE_TABLE_EDT_MAX 64 /* EDT Domain Table (0-63) */
struct PnvXive {
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
XiveRouter parent_obj;
/* Owning chip */
PnvChip *chip;
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
/* XSCOM addresses giving access to the controller registers */
MemoryRegion xscom_regs;
/* Main MMIO regions that can be configured by FW */
MemoryRegion ic_mmio;
MemoryRegion ic_reg_mmio;
MemoryRegion ic_notify_mmio;
MemoryRegion ic_lsi_mmio;
MemoryRegion tm_indirect_mmio;
MemoryRegion vc_mmio;
MemoryRegion pc_mmio;
MemoryRegion tm_mmio;
/*
* IPI and END address spaces modeling the EDT segmentation in the
* VC region
*/
AddressSpace ipi_as;
MemoryRegion ipi_mmio;
MemoryRegion ipi_edt_mmio;
AddressSpace end_as;
MemoryRegion end_mmio;
MemoryRegion end_edt_mmio;
/* Shortcut values for the Main MMIO regions */
hwaddr ic_base;
uint32_t ic_shift;
hwaddr vc_base;
uint32_t vc_shift;
hwaddr pc_base;
uint32_t pc_shift;
hwaddr tm_base;
uint32_t tm_shift;
/* Our XIVE source objects for IPIs and ENDs */
XiveSource ipi_source;
XiveENDSource end_source;
/* Interrupt controller registers */
uint64_t regs[0x300];
/*
* Virtual Structure Descriptor tables : EAT, SBE, ENDT, NVTT, IRQ
* These are in a SRAM protected by ECC.
*/
uint64_t vsds[5][XIVE_BLOCK_MAX];
/* Translation tables */
uint64_t blk[XIVE_TABLE_BLK_MAX];
uint64_t mig[XIVE_TABLE_MIG_MAX];
uint64_t vdt[XIVE_TABLE_VDT_MAX];
uint64_t edt[XIVE_TABLE_EDT_MAX];
};
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
struct PnvXiveClass {
XiveRouterClass parent_class;
DeviceRealize parent_realize;
};
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
void pnv_xive_pic_print_info(PnvXive *xive, Monitor *mon);
ppc/pnv: Add a XIVE2 controller to the POWER10 chip The XIVE2 interrupt controller of the POWER10 processor follows the same logic than on POWER9 but the HW interface has been largely reviewed. It has a new register interface, different BARs, extra VSDs, new layout for the XIVE2 structures, and a set of new features which are described below. This is a model of the POWER10 XIVE2 interrupt controller for the PowerNV machine. It focuses primarily on the needs of the skiboot firmware but some initial hypervisor support is implemented for KVM use (escalation). Support for new features will be implemented in time and will require new support from the OS. * XIVE2 BARS The interrupt controller BARs have a different layout outlined below. Each sub-engine has now own its range and the indirect TIMA access was replaced with a set of pages, one per CPU, under the IC BAR: - IC BAR (Interrupt Controller) . 4 pages, one per sub-engine . 128 indirect TIMA pages - TM BAR (Thread Interrupt Management Area) . 4 pages - ESB BAR (ESB pages for IPIs) . up to 1TB - END BAR (ESB pages for ENDs) . up to 2TB - NVC BAR (Notification Virtual Crowd) . up to 128 - NVPG BAR (Notification Virtual Process and Group) . up to 1TB - Direct mapped Thread Context Area (reads & writes) OPAL does not use the grouping and crowd capability. * Virtual Structure Tables XIVE2 adds new tables types and also changes the field layout of the END and NVP Virtualization Structure Descriptors. - EAS - END new layout - NVT was splitted in : . NVP (Processor), 32B . NVG (Group), 32B . NVC (Crowd == P9 block group) 32B - IC for remote configuration - SYNC for cache injection - ERQ for event input queue The setup is slighly different on XIVE2 because the indexing has changed for some of the tables, block ID or the chip topology ID can be used. * XIVE2 features SCOM and MMIO registers have a new layout and XIVE2 adds a new global capability and configuration registers. The lowlevel hardware offers a set of new features among which : - a configurable number of priorities : 1 - 8 - StoreEOI with load-after-store ordering is activated by default - Gen2 TIMA layout - A P9-compat mode, or Gen1, TIMA toggle bit for SW compatibility - increase to 24bit for VP number Other features will have some impact on the Hypervisor and guest OS when activated, but this is not required for initial support of the controller. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-02 08:51:38 +03:00
/*
* XIVE2 interrupt controller (POWER10)
*/
#define TYPE_PNV_XIVE2 "pnv-xive2"
OBJECT_DECLARE_TYPE(PnvXive2, PnvXive2Class, PNV_XIVE2);
typedef struct PnvXive2 {
Xive2Router parent_obj;
/* Owning chip */
PnvChip *chip;
ppc/pnv: Add a XIVE2 controller to the POWER10 chip The XIVE2 interrupt controller of the POWER10 processor follows the same logic than on POWER9 but the HW interface has been largely reviewed. It has a new register interface, different BARs, extra VSDs, new layout for the XIVE2 structures, and a set of new features which are described below. This is a model of the POWER10 XIVE2 interrupt controller for the PowerNV machine. It focuses primarily on the needs of the skiboot firmware but some initial hypervisor support is implemented for KVM use (escalation). Support for new features will be implemented in time and will require new support from the OS. * XIVE2 BARS The interrupt controller BARs have a different layout outlined below. Each sub-engine has now own its range and the indirect TIMA access was replaced with a set of pages, one per CPU, under the IC BAR: - IC BAR (Interrupt Controller) . 4 pages, one per sub-engine . 128 indirect TIMA pages - TM BAR (Thread Interrupt Management Area) . 4 pages - ESB BAR (ESB pages for IPIs) . up to 1TB - END BAR (ESB pages for ENDs) . up to 2TB - NVC BAR (Notification Virtual Crowd) . up to 128 - NVPG BAR (Notification Virtual Process and Group) . up to 1TB - Direct mapped Thread Context Area (reads & writes) OPAL does not use the grouping and crowd capability. * Virtual Structure Tables XIVE2 adds new tables types and also changes the field layout of the END and NVP Virtualization Structure Descriptors. - EAS - END new layout - NVT was splitted in : . NVP (Processor), 32B . NVG (Group), 32B . NVC (Crowd == P9 block group) 32B - IC for remote configuration - SYNC for cache injection - ERQ for event input queue The setup is slighly different on XIVE2 because the indexing has changed for some of the tables, block ID or the chip topology ID can be used. * XIVE2 features SCOM and MMIO registers have a new layout and XIVE2 adds a new global capability and configuration registers. The lowlevel hardware offers a set of new features among which : - a configurable number of priorities : 1 - 8 - StoreEOI with load-after-store ordering is activated by default - Gen2 TIMA layout - A P9-compat mode, or Gen1, TIMA toggle bit for SW compatibility - increase to 24bit for VP number Other features will have some impact on the Hypervisor and guest OS when activated, but this is not required for initial support of the controller. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-02 08:51:38 +03:00
/* XSCOM addresses giving access to the controller registers */
MemoryRegion xscom_regs;
MemoryRegion ic_mmio;
MemoryRegion ic_mmios[8];
MemoryRegion esb_mmio;
MemoryRegion end_mmio;
MemoryRegion nvc_mmio;
MemoryRegion nvpg_mmio;
MemoryRegion tm_mmio;
/* Shortcut values for the Main MMIO regions */
hwaddr ic_base;
uint32_t ic_shift;
hwaddr esb_base;
uint32_t esb_shift;
hwaddr end_base;
uint32_t end_shift;
hwaddr nvc_base;
uint32_t nvc_shift;
hwaddr nvpg_base;
uint32_t nvpg_shift;
hwaddr tm_base;
uint32_t tm_shift;
/* Interrupt controller registers */
uint64_t cq_regs[0x40];
uint64_t vc_regs[0x100];
uint64_t pc_regs[0x100];
uint64_t tctxt_regs[0x30];
/* To change default behavior */
uint64_t capabilities;
uint64_t config;
/* Our XIVE source objects for IPIs and ENDs */
XiveSource ipi_source;
Xive2EndSource end_source;
/*
* Virtual Structure Descriptor tables
* These are in a SRAM protected by ECC.
*/
uint64_t vsds[9][XIVE_BLOCK_MAX];
/* Translation tables */
uint64_t tables[8][XIVE_BLOCK_MAX];
} PnvXive2;
typedef struct PnvXive2Class {
Xive2RouterClass parent_class;
DeviceRealize parent_realize;
} PnvXive2Class;
void pnv_xive2_pic_print_info(PnvXive2 *xive, Monitor *mon);
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
#endif /* PPC_PNV_XIVE_H */