qemu/default-configs/pci.mak

52 lines
1015 B
Makefile
Raw Normal View History

CONFIG_PCI=y
# For now, CONFIG_IDE_CORE requires ISA, so we enable it here
CONFIG_ISA_BUS=y
CONFIG_VIRTIO_PCI=y
include virtio.mak
CONFIG_USB_UHCI=y
CONFIG_USB_OHCI=y
CONFIG_USB_EHCI=y
CONFIG_USB_XHCI=y
CONFIG_USB_XHCI_NEC=y
CONFIG_NE2000_PCI=y
CONFIG_EEPRO100_PCI=y
CONFIG_PCNET_PCI=y
CONFIG_PCNET_COMMON=y
CONFIG_AC97=y
CONFIG_HDA=y
CONFIG_ES1370=y
CONFIG_SCSI=y
CONFIG_LSI_SCSI_PCI=y
CONFIG_VMW_PVSCSI_SCSI_PCI=y
CONFIG_MEGASAS_SCSI_PCI=y
CONFIG_MPTSAS_SCSI_PCI=y
CONFIG_RTL8139_PCI=y
CONFIG_E1000_PCI=y
CONFIG_E1000E_PCI_EXPRESS=y
CONFIG_IDE_CORE=y
CONFIG_IDE_QDEV=y
CONFIG_IDE_PCI=y
CONFIG_AHCI=y
CONFIG_ESP=y
CONFIG_ESP_PCI=y
CONFIG_SERIAL=y
CONFIG_SERIAL_ISA=y
CONFIG_SERIAL_PCI=y
CONFIG_CAN_BUS=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_PCI=y
CONFIG_IPACK=y
CONFIG_WDT_IB6300ESB=y
CONFIG_PCI_TESTDEV=y
CONFIG_NVME_PCI=y
CONFIG_SD=y
CONFIG_SDHCI=y
CONFIG_EDU=y
CONFIG_VGA=y
CONFIG_VGA_PCI=y
CONFIG_BOCHS_DISPLAY=y
CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 07:09:30 +03:00
CONFIG_ROCKER=y
CONFIG_VFIO=$(CONFIG_LINUX)
CONFIG_VFIO_PCI=y