2021-02-19 00:24:51 +03:00
|
|
|
/*
|
|
|
|
* Nuvoton NPCM7xx EMC Module
|
|
|
|
*
|
|
|
|
* Copyright 2020 Google LLC
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
|
|
* for more details.
|
|
|
|
*
|
|
|
|
* Unsupported/unimplemented features:
|
|
|
|
* - MCMDR.FDUP (full duplex) is ignored, half duplex is not supported
|
|
|
|
* - Only CAM0 is supported, CAM[1-15] are not
|
|
|
|
* - writes to CAMEN.[1-15] are ignored, these bits always read as zeroes
|
|
|
|
* - MII is not implemented, MIIDA.BUSY and MIID always return zero
|
|
|
|
* - MCMDR.LBK is not implemented
|
|
|
|
* - MCMDR.{OPMOD,ENSQE,AEP,ARP} are not supported
|
|
|
|
* - H/W FIFOs are not supported, MCMDR.FFTCR is ignored
|
|
|
|
* - MGSTA.SQE is not supported
|
|
|
|
* - pause and control frames are not implemented
|
|
|
|
* - MGSTA.CCNT is not supported
|
|
|
|
* - MPCNT, DMARFS are not implemented
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "qemu/osdep.h"
|
|
|
|
|
|
|
|
/* For crc32 */
|
|
|
|
#include <zlib.h>
|
|
|
|
|
|
|
|
#include "hw/irq.h"
|
|
|
|
#include "hw/qdev-clock.h"
|
|
|
|
#include "hw/qdev-properties.h"
|
|
|
|
#include "hw/net/npcm7xx_emc.h"
|
|
|
|
#include "net/eth.h"
|
|
|
|
#include "migration/vmstate.h"
|
|
|
|
#include "qemu/bitops.h"
|
|
|
|
#include "qemu/error-report.h"
|
|
|
|
#include "qemu/log.h"
|
|
|
|
#include "qemu/module.h"
|
|
|
|
#include "qemu/units.h"
|
|
|
|
#include "sysemu/dma.h"
|
|
|
|
#include "trace.h"
|
|
|
|
|
|
|
|
#define CRC_LENGTH 4
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The maximum size of a (layer 2) ethernet frame as defined by 802.3.
|
|
|
|
* 1518 = 6(dest macaddr) + 6(src macaddr) + 2(proto) + 4(crc) + 1500(payload)
|
|
|
|
* This does not include an additional 4 for the vlan field (802.1q).
|
|
|
|
*/
|
|
|
|
#define MAX_ETH_FRAME_SIZE 1518
|
|
|
|
|
|
|
|
static const char *emc_reg_name(int regno)
|
|
|
|
{
|
|
|
|
#define REG(name) case REG_ ## name: return #name;
|
|
|
|
switch (regno) {
|
|
|
|
REG(CAMCMR)
|
|
|
|
REG(CAMEN)
|
|
|
|
REG(TXDLSA)
|
|
|
|
REG(RXDLSA)
|
|
|
|
REG(MCMDR)
|
|
|
|
REG(MIID)
|
|
|
|
REG(MIIDA)
|
|
|
|
REG(FFTCR)
|
|
|
|
REG(TSDR)
|
|
|
|
REG(RSDR)
|
|
|
|
REG(DMARFC)
|
|
|
|
REG(MIEN)
|
|
|
|
REG(MISTA)
|
|
|
|
REG(MGSTA)
|
|
|
|
REG(MPCNT)
|
|
|
|
REG(MRPC)
|
|
|
|
REG(MRPCC)
|
|
|
|
REG(MREPC)
|
|
|
|
REG(DMARFS)
|
|
|
|
REG(CTXDSA)
|
|
|
|
REG(CTXBSA)
|
|
|
|
REG(CRXDSA)
|
|
|
|
REG(CRXBSA)
|
|
|
|
case REG_CAMM_BASE + 0: return "CAM0M";
|
|
|
|
case REG_CAML_BASE + 0: return "CAM0L";
|
|
|
|
case REG_CAMM_BASE + 2 ... REG_CAMML_LAST:
|
|
|
|
/* Only CAM0 is supported, fold the others into something simple. */
|
|
|
|
if (regno & 1) {
|
|
|
|
return "CAM<n>L";
|
|
|
|
} else {
|
|
|
|
return "CAM<n>M";
|
|
|
|
}
|
|
|
|
default: return "UNKNOWN";
|
|
|
|
}
|
|
|
|
#undef REG
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_reset(NPCM7xxEMCState *emc)
|
|
|
|
{
|
2022-10-03 20:38:10 +03:00
|
|
|
uint32_t value;
|
|
|
|
|
2021-02-19 00:24:51 +03:00
|
|
|
trace_npcm7xx_emc_reset(emc->emc_num);
|
|
|
|
|
|
|
|
memset(&emc->regs[0], 0, sizeof(emc->regs));
|
|
|
|
|
|
|
|
/* These regs have non-zero reset values. */
|
|
|
|
emc->regs[REG_TXDLSA] = 0xfffffffc;
|
|
|
|
emc->regs[REG_RXDLSA] = 0xfffffffc;
|
|
|
|
emc->regs[REG_MIIDA] = 0x00900000;
|
|
|
|
emc->regs[REG_FFTCR] = 0x0101;
|
|
|
|
emc->regs[REG_DMARFC] = 0x0800;
|
|
|
|
emc->regs[REG_MPCNT] = 0x7fff;
|
|
|
|
|
|
|
|
emc->tx_active = false;
|
|
|
|
emc->rx_active = false;
|
2022-10-03 20:38:10 +03:00
|
|
|
|
|
|
|
/* Set the MAC address in the register space. */
|
|
|
|
value = (emc->conf.macaddr.a[0] << 24) |
|
|
|
|
(emc->conf.macaddr.a[1] << 16) |
|
|
|
|
(emc->conf.macaddr.a[2] << 8) |
|
|
|
|
emc->conf.macaddr.a[3];
|
|
|
|
emc->regs[REG_CAMM_BASE] = value;
|
|
|
|
|
|
|
|
value = (emc->conf.macaddr.a[4] << 24) | (emc->conf.macaddr.a[5] << 16);
|
|
|
|
emc->regs[REG_CAML_BASE] = value;
|
2021-02-19 00:24:51 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void npcm7xx_emc_reset(DeviceState *dev)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCState *emc = NPCM7XX_EMC(dev);
|
|
|
|
emc_reset(emc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_soft_reset(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* The docs say at least MCMDR.{LBK,OPMOD} bits are not changed during a
|
|
|
|
* soft reset, but does not go into further detail. For now, KISS.
|
|
|
|
*/
|
|
|
|
uint32_t mcmdr = emc->regs[REG_MCMDR];
|
|
|
|
emc_reset(emc);
|
|
|
|
emc->regs[REG_MCMDR] = mcmdr & (REG_MCMDR_LBK | REG_MCMDR_OPMOD);
|
|
|
|
|
|
|
|
qemu_set_irq(emc->tx_irq, 0);
|
|
|
|
qemu_set_irq(emc->rx_irq, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_set_link(NetClientState *nc)
|
|
|
|
{
|
|
|
|
/* Nothing to do yet. */
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MISTA.TXINTR is the union of the individual bits with their enables. */
|
|
|
|
static void emc_update_mista_txintr(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
/* Only look at the bits we support. */
|
|
|
|
uint32_t mask = (REG_MISTA_TXBERR |
|
|
|
|
REG_MISTA_TDU |
|
|
|
|
REG_MISTA_TXCP);
|
|
|
|
if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) {
|
|
|
|
emc->regs[REG_MISTA] |= REG_MISTA_TXINTR;
|
|
|
|
} else {
|
|
|
|
emc->regs[REG_MISTA] &= ~REG_MISTA_TXINTR;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MISTA.RXINTR is the union of the individual bits with their enables. */
|
|
|
|
static void emc_update_mista_rxintr(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
/* Only look at the bits we support. */
|
|
|
|
uint32_t mask = (REG_MISTA_RXBERR |
|
|
|
|
REG_MISTA_RDU |
|
|
|
|
REG_MISTA_RXGD);
|
|
|
|
if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) {
|
|
|
|
emc->regs[REG_MISTA] |= REG_MISTA_RXINTR;
|
|
|
|
} else {
|
|
|
|
emc->regs[REG_MISTA] &= ~REG_MISTA_RXINTR;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* N.B. emc_update_mista_txintr must have already been called. */
|
|
|
|
static void emc_update_tx_irq(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
int level = !!(emc->regs[REG_MISTA] &
|
|
|
|
emc->regs[REG_MIEN] &
|
|
|
|
REG_MISTA_TXINTR);
|
|
|
|
trace_npcm7xx_emc_update_tx_irq(level);
|
|
|
|
qemu_set_irq(emc->tx_irq, level);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* N.B. emc_update_mista_rxintr must have already been called. */
|
|
|
|
static void emc_update_rx_irq(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
int level = !!(emc->regs[REG_MISTA] &
|
|
|
|
emc->regs[REG_MIEN] &
|
|
|
|
REG_MISTA_RXINTR);
|
|
|
|
trace_npcm7xx_emc_update_rx_irq(level);
|
|
|
|
qemu_set_irq(emc->rx_irq, level);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update IRQ states due to changes in MIEN,MISTA. */
|
|
|
|
static void emc_update_irq_from_reg_change(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
emc_update_mista_txintr(emc);
|
|
|
|
emc_update_tx_irq(emc);
|
|
|
|
|
|
|
|
emc_update_mista_rxintr(emc);
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int emc_read_tx_desc(dma_addr_t addr, NPCM7xxEMCTxDesc *desc)
|
|
|
|
{
|
dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
(
- dma_memory_read(E1, E2, E3, E4)
+ dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
|
- dma_memory_write(E1, E2, E3, E4)
+ dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2020-09-03 11:08:29 +03:00
|
|
|
if (dma_memory_read(&address_space_memory, addr, desc,
|
|
|
|
sizeof(*desc), MEMTXATTRS_UNSPECIFIED)) {
|
2021-02-19 00:24:51 +03:00
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%"
|
|
|
|
HWADDR_PRIx "\n", __func__, addr);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
desc->flags = le32_to_cpu(desc->flags);
|
|
|
|
desc->txbsa = le32_to_cpu(desc->txbsa);
|
|
|
|
desc->status_and_length = le32_to_cpu(desc->status_and_length);
|
|
|
|
desc->ntxdsa = le32_to_cpu(desc->ntxdsa);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int emc_write_tx_desc(const NPCM7xxEMCTxDesc *desc, dma_addr_t addr)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCTxDesc le_desc;
|
|
|
|
|
|
|
|
le_desc.flags = cpu_to_le32(desc->flags);
|
|
|
|
le_desc.txbsa = cpu_to_le32(desc->txbsa);
|
|
|
|
le_desc.status_and_length = cpu_to_le32(desc->status_and_length);
|
|
|
|
le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa);
|
|
|
|
if (dma_memory_write(&address_space_memory, addr, &le_desc,
|
dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
(
- dma_memory_read(E1, E2, E3, E4)
+ dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
|
- dma_memory_write(E1, E2, E3, E4)
+ dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2020-09-03 11:08:29 +03:00
|
|
|
sizeof(le_desc), MEMTXATTRS_UNSPECIFIED)) {
|
2021-02-19 00:24:51 +03:00
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%"
|
|
|
|
HWADDR_PRIx "\n", __func__, addr);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int emc_read_rx_desc(dma_addr_t addr, NPCM7xxEMCRxDesc *desc)
|
|
|
|
{
|
dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
(
- dma_memory_read(E1, E2, E3, E4)
+ dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
|
- dma_memory_write(E1, E2, E3, E4)
+ dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2020-09-03 11:08:29 +03:00
|
|
|
if (dma_memory_read(&address_space_memory, addr, desc,
|
|
|
|
sizeof(*desc), MEMTXATTRS_UNSPECIFIED)) {
|
2021-02-19 00:24:51 +03:00
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%"
|
|
|
|
HWADDR_PRIx "\n", __func__, addr);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
desc->status_and_length = le32_to_cpu(desc->status_and_length);
|
|
|
|
desc->rxbsa = le32_to_cpu(desc->rxbsa);
|
|
|
|
desc->reserved = le32_to_cpu(desc->reserved);
|
|
|
|
desc->nrxdsa = le32_to_cpu(desc->nrxdsa);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int emc_write_rx_desc(const NPCM7xxEMCRxDesc *desc, dma_addr_t addr)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCRxDesc le_desc;
|
|
|
|
|
|
|
|
le_desc.status_and_length = cpu_to_le32(desc->status_and_length);
|
|
|
|
le_desc.rxbsa = cpu_to_le32(desc->rxbsa);
|
|
|
|
le_desc.reserved = cpu_to_le32(desc->reserved);
|
|
|
|
le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa);
|
|
|
|
if (dma_memory_write(&address_space_memory, addr, &le_desc,
|
dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
(
- dma_memory_read(E1, E2, E3, E4)
+ dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
|
- dma_memory_write(E1, E2, E3, E4)
+ dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2020-09-03 11:08:29 +03:00
|
|
|
sizeof(le_desc), MEMTXATTRS_UNSPECIFIED)) {
|
2021-02-19 00:24:51 +03:00
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%"
|
|
|
|
HWADDR_PRIx "\n", __func__, addr);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_set_mista(NPCM7xxEMCState *emc, uint32_t flags)
|
|
|
|
{
|
|
|
|
trace_npcm7xx_emc_set_mista(flags);
|
|
|
|
emc->regs[REG_MISTA] |= flags;
|
|
|
|
if (extract32(flags, 16, 16)) {
|
|
|
|
emc_update_mista_txintr(emc);
|
|
|
|
}
|
|
|
|
if (extract32(flags, 0, 16)) {
|
|
|
|
emc_update_mista_rxintr(emc);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_halt_tx(NPCM7xxEMCState *emc, uint32_t mista_flag)
|
|
|
|
{
|
|
|
|
emc->tx_active = false;
|
|
|
|
emc_set_mista(emc, mista_flag);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag)
|
|
|
|
{
|
|
|
|
emc->rx_active = false;
|
|
|
|
emc_set_mista(emc, mista_flag);
|
|
|
|
}
|
|
|
|
|
2021-12-04 01:10:02 +03:00
|
|
|
static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
emc->rx_active = true;
|
|
|
|
qemu_flush_queued_packets(qemu_get_queue(emc->nic));
|
|
|
|
}
|
|
|
|
|
2021-02-19 00:24:51 +03:00
|
|
|
static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc,
|
|
|
|
const NPCM7xxEMCTxDesc *tx_desc,
|
|
|
|
uint32_t desc_addr)
|
|
|
|
{
|
|
|
|
/* Update the current descriptor, if only to reset the owner flag. */
|
|
|
|
if (emc_write_tx_desc(tx_desc, desc_addr)) {
|
|
|
|
/*
|
|
|
|
* We just read it so this shouldn't generally happen.
|
|
|
|
* Error already reported.
|
|
|
|
*/
|
|
|
|
emc_set_mista(emc, REG_MISTA_TXBERR);
|
|
|
|
}
|
|
|
|
emc->regs[REG_CTXDSA] = TX_DESC_NTXDSA(tx_desc->ntxdsa);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_set_next_rx_descriptor(NPCM7xxEMCState *emc,
|
|
|
|
const NPCM7xxEMCRxDesc *rx_desc,
|
|
|
|
uint32_t desc_addr)
|
|
|
|
{
|
|
|
|
/* Update the current descriptor, if only to reset the owner flag. */
|
|
|
|
if (emc_write_rx_desc(rx_desc, desc_addr)) {
|
|
|
|
/*
|
|
|
|
* We just read it so this shouldn't generally happen.
|
|
|
|
* Error already reported.
|
|
|
|
*/
|
|
|
|
emc_set_mista(emc, REG_MISTA_RXBERR);
|
|
|
|
}
|
|
|
|
emc->regs[REG_CRXDSA] = RX_DESC_NRXDSA(rx_desc->nrxdsa);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void emc_try_send_next_packet(NPCM7xxEMCState *emc)
|
|
|
|
{
|
|
|
|
/* Working buffer for sending out packets. Most packets fit in this. */
|
|
|
|
#define TX_BUFFER_SIZE 2048
|
|
|
|
uint8_t tx_send_buffer[TX_BUFFER_SIZE];
|
|
|
|
uint32_t desc_addr = TX_DESC_NTXDSA(emc->regs[REG_CTXDSA]);
|
|
|
|
NPCM7xxEMCTxDesc tx_desc;
|
|
|
|
uint32_t next_buf_addr, length;
|
|
|
|
uint8_t *buf;
|
|
|
|
g_autofree uint8_t *malloced_buf = NULL;
|
|
|
|
|
|
|
|
if (emc_read_tx_desc(desc_addr, &tx_desc)) {
|
|
|
|
/* Error reading descriptor, already reported. */
|
|
|
|
emc_halt_tx(emc, REG_MISTA_TXBERR);
|
|
|
|
emc_update_tx_irq(emc);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Nothing we can do if we don't own the descriptor. */
|
|
|
|
if (!(tx_desc.flags & TX_DESC_FLAG_OWNER_MASK)) {
|
|
|
|
trace_npcm7xx_emc_cpu_owned_desc(desc_addr);
|
|
|
|
emc_halt_tx(emc, REG_MISTA_TDU);
|
|
|
|
emc_update_tx_irq(emc);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Give the descriptor back regardless of what happens. */
|
|
|
|
tx_desc.flags &= ~TX_DESC_FLAG_OWNER_MASK;
|
|
|
|
tx_desc.status_and_length &= 0xffff;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Despite the h/w documentation saying the tx buffer is word aligned,
|
|
|
|
* the linux driver does not word align the buffer. There is value in not
|
|
|
|
* aligning the buffer: See the description of NET_IP_ALIGN in linux
|
|
|
|
* kernel sources.
|
|
|
|
*/
|
|
|
|
next_buf_addr = tx_desc.txbsa;
|
|
|
|
emc->regs[REG_CTXBSA] = next_buf_addr;
|
|
|
|
length = TX_DESC_PKT_LEN(tx_desc.status_and_length);
|
|
|
|
buf = &tx_send_buffer[0];
|
|
|
|
|
|
|
|
if (length > sizeof(tx_send_buffer)) {
|
|
|
|
malloced_buf = g_malloc(length);
|
|
|
|
buf = malloced_buf;
|
|
|
|
}
|
|
|
|
|
dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
(
- dma_memory_read(E1, E2, E3, E4)
+ dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
|
- dma_memory_write(E1, E2, E3, E4)
+ dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2020-09-03 11:08:29 +03:00
|
|
|
if (dma_memory_read(&address_space_memory, next_buf_addr, buf,
|
|
|
|
length, MEMTXATTRS_UNSPECIFIED)) {
|
2021-02-19 00:24:51 +03:00
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read packet @ 0x%x\n",
|
|
|
|
__func__, next_buf_addr);
|
|
|
|
emc_set_mista(emc, REG_MISTA_TXBERR);
|
|
|
|
emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr);
|
|
|
|
emc_update_tx_irq(emc);
|
|
|
|
trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((tx_desc.flags & TX_DESC_FLAG_PADEN) && (length < MIN_PACKET_LENGTH)) {
|
|
|
|
memset(buf + length, 0, MIN_PACKET_LENGTH - length);
|
|
|
|
length = MIN_PACKET_LENGTH;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* N.B. emc_receive can get called here. */
|
|
|
|
qemu_send_packet(qemu_get_queue(emc->nic), buf, length);
|
|
|
|
trace_npcm7xx_emc_sent_packet(length);
|
|
|
|
|
|
|
|
tx_desc.status_and_length |= TX_DESC_STATUS_TXCP;
|
|
|
|
if (tx_desc.flags & TX_DESC_FLAG_INTEN) {
|
|
|
|
emc_set_mista(emc, REG_MISTA_TXCP);
|
|
|
|
}
|
|
|
|
if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_TXINTR) {
|
|
|
|
tx_desc.status_and_length |= TX_DESC_STATUS_TXINTR;
|
|
|
|
}
|
|
|
|
|
|
|
|
emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr);
|
|
|
|
emc_update_tx_irq(emc);
|
|
|
|
trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool emc_can_receive(NetClientState *nc)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc));
|
|
|
|
|
|
|
|
bool can_receive = emc->rx_active;
|
|
|
|
trace_npcm7xx_emc_can_receive(can_receive);
|
|
|
|
return can_receive;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If result is false then *fail_reason contains the reason. */
|
|
|
|
static bool emc_receive_filter1(NPCM7xxEMCState *emc, const uint8_t *buf,
|
|
|
|
size_t len, const char **fail_reason)
|
|
|
|
{
|
|
|
|
eth_pkt_types_e pkt_type = get_eth_packet_type(PKT_GET_ETH_HDR(buf));
|
|
|
|
|
|
|
|
switch (pkt_type) {
|
|
|
|
case ETH_PKT_BCAST:
|
|
|
|
if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) {
|
|
|
|
return true;
|
|
|
|
} else {
|
|
|
|
*fail_reason = "Broadcast packet disabled";
|
|
|
|
return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_ABP);
|
|
|
|
}
|
|
|
|
case ETH_PKT_MCAST:
|
|
|
|
if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) {
|
|
|
|
return true;
|
|
|
|
} else {
|
|
|
|
*fail_reason = "Multicast packet disabled";
|
|
|
|
return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_AMP);
|
|
|
|
}
|
|
|
|
case ETH_PKT_UCAST: {
|
|
|
|
bool matches;
|
2022-10-03 20:38:10 +03:00
|
|
|
uint32_t value;
|
|
|
|
struct MACAddr mac;
|
2021-02-19 00:24:51 +03:00
|
|
|
if (emc->regs[REG_CAMCMR] & REG_CAMCMR_AUP) {
|
|
|
|
return true;
|
|
|
|
}
|
2022-10-03 20:38:10 +03:00
|
|
|
|
|
|
|
value = emc->regs[REG_CAMM_BASE];
|
|
|
|
mac.a[0] = value >> 24;
|
|
|
|
mac.a[1] = value >> 16;
|
|
|
|
mac.a[2] = value >> 8;
|
|
|
|
mac.a[3] = value >> 0;
|
|
|
|
value = emc->regs[REG_CAML_BASE];
|
|
|
|
mac.a[4] = value >> 24;
|
|
|
|
mac.a[5] = value >> 16;
|
|
|
|
|
2021-02-19 00:24:51 +03:00
|
|
|
matches = ((emc->regs[REG_CAMCMR] & REG_CAMCMR_ECMP) &&
|
|
|
|
/* We only support one CAM register, CAM0. */
|
|
|
|
(emc->regs[REG_CAMEN] & (1 << 0)) &&
|
2022-10-03 20:38:10 +03:00
|
|
|
memcmp(buf, mac.a, ETH_ALEN) == 0);
|
2021-02-19 00:24:51 +03:00
|
|
|
if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) {
|
|
|
|
*fail_reason = "MACADDR matched, comparison complemented";
|
|
|
|
return !matches;
|
|
|
|
} else {
|
|
|
|
*fail_reason = "MACADDR didn't match";
|
|
|
|
return matches;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
default:
|
|
|
|
g_assert_not_reached();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool emc_receive_filter(NPCM7xxEMCState *emc, const uint8_t *buf,
|
|
|
|
size_t len)
|
|
|
|
{
|
|
|
|
const char *fail_reason = NULL;
|
|
|
|
bool ok = emc_receive_filter1(emc, buf, len, &fail_reason);
|
|
|
|
if (!ok) {
|
|
|
|
trace_npcm7xx_emc_packet_filtered_out(fail_reason);
|
|
|
|
}
|
|
|
|
return ok;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc));
|
|
|
|
const uint32_t len = len1;
|
|
|
|
size_t max_frame_len;
|
|
|
|
bool long_frame;
|
|
|
|
uint32_t desc_addr;
|
|
|
|
NPCM7xxEMCRxDesc rx_desc;
|
|
|
|
uint32_t crc;
|
|
|
|
uint8_t *crc_ptr;
|
|
|
|
uint32_t buf_addr;
|
|
|
|
|
|
|
|
trace_npcm7xx_emc_receiving_packet(len);
|
|
|
|
|
|
|
|
if (!emc_can_receive(nc)) {
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Unexpected packet\n", __func__);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (len < ETH_HLEN ||
|
|
|
|
/* Defensive programming: drop unsupportable large packets. */
|
|
|
|
len > 0xffff - CRC_LENGTH) {
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Dropped frame of %u bytes\n",
|
|
|
|
__func__, len);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DENI is set if EMC received the Length/Type field of the incoming
|
|
|
|
* packet, so it will be set regardless of what happens next.
|
|
|
|
*/
|
|
|
|
emc_set_mista(emc, REG_MISTA_DENI);
|
|
|
|
|
|
|
|
if (!emc_receive_filter(emc, buf, len)) {
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Huge frames (> DMARFC) are dropped. */
|
|
|
|
max_frame_len = REG_DMARFC_RXMS(emc->regs[REG_DMARFC]);
|
|
|
|
if (len + CRC_LENGTH > max_frame_len) {
|
|
|
|
trace_npcm7xx_emc_packet_dropped(len);
|
|
|
|
emc_set_mista(emc, REG_MISTA_DFOI);
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Long Frames (> MAX_ETH_FRAME_SIZE) are also dropped, unless MCMDR.ALP
|
|
|
|
* is set.
|
|
|
|
*/
|
|
|
|
long_frame = false;
|
|
|
|
if (len + CRC_LENGTH > MAX_ETH_FRAME_SIZE) {
|
|
|
|
if (emc->regs[REG_MCMDR] & REG_MCMDR_ALP) {
|
|
|
|
long_frame = true;
|
|
|
|
} else {
|
|
|
|
trace_npcm7xx_emc_packet_dropped(len);
|
|
|
|
emc_set_mista(emc, REG_MISTA_PTLE);
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
desc_addr = RX_DESC_NRXDSA(emc->regs[REG_CRXDSA]);
|
|
|
|
if (emc_read_rx_desc(desc_addr, &rx_desc)) {
|
|
|
|
/* Error reading descriptor, already reported. */
|
|
|
|
emc_halt_rx(emc, REG_MISTA_RXBERR);
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Nothing we can do if we don't own the descriptor. */
|
|
|
|
if (!(rx_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK)) {
|
|
|
|
trace_npcm7xx_emc_cpu_owned_desc(desc_addr);
|
|
|
|
emc_halt_rx(emc, REG_MISTA_RDU);
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
crc = 0;
|
|
|
|
crc_ptr = (uint8_t *) &crc;
|
|
|
|
if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) {
|
|
|
|
crc = cpu_to_be32(crc32(~0, buf, len));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Give the descriptor back regardless of what happens. */
|
|
|
|
rx_desc.status_and_length &= ~RX_DESC_STATUS_OWNER_MASK;
|
|
|
|
|
|
|
|
buf_addr = rx_desc.rxbsa;
|
|
|
|
emc->regs[REG_CRXBSA] = buf_addr;
|
dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
(
- dma_memory_read(E1, E2, E3, E4)
+ dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
|
- dma_memory_write(E1, E2, E3, E4)
+ dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2020-09-03 11:08:29 +03:00
|
|
|
if (dma_memory_write(&address_space_memory, buf_addr, buf,
|
|
|
|
len, MEMTXATTRS_UNSPECIFIED) ||
|
2021-02-19 00:24:51 +03:00
|
|
|
(!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC) &&
|
dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
(
- dma_memory_read(E1, E2, E3, E4)
+ dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
|
- dma_memory_write(E1, E2, E3, E4)
+ dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2020-09-03 11:08:29 +03:00
|
|
|
dma_memory_write(&address_space_memory, buf_addr + len,
|
|
|
|
crc_ptr, 4, MEMTXATTRS_UNSPECIFIED))) {
|
2021-02-19 00:24:51 +03:00
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bus error writing packet\n",
|
|
|
|
__func__);
|
|
|
|
emc_set_mista(emc, REG_MISTA_RXBERR);
|
|
|
|
emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr);
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
trace_npcm7xx_emc_received_packet(len);
|
|
|
|
|
|
|
|
/* Note: We've already verified len+4 <= 0xffff. */
|
|
|
|
rx_desc.status_and_length = len;
|
|
|
|
if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) {
|
|
|
|
rx_desc.status_and_length += 4;
|
|
|
|
}
|
|
|
|
rx_desc.status_and_length |= RX_DESC_STATUS_RXGD;
|
|
|
|
emc_set_mista(emc, REG_MISTA_RXGD);
|
|
|
|
|
|
|
|
if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_RXINTR) {
|
|
|
|
rx_desc.status_and_length |= RX_DESC_STATUS_RXINTR;
|
|
|
|
}
|
|
|
|
if (long_frame) {
|
|
|
|
rx_desc.status_and_length |= RX_DESC_STATUS_PTLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr);
|
|
|
|
emc_update_rx_irq(emc);
|
|
|
|
trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCState *emc = opaque;
|
|
|
|
uint32_t reg = offset / sizeof(uint32_t);
|
|
|
|
uint32_t result;
|
|
|
|
|
|
|
|
if (reg >= NPCM7XX_NUM_EMC_REGS) {
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
|
|
"%s: Invalid offset 0x%04" HWADDR_PRIx "\n",
|
|
|
|
__func__, offset);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case REG_MIID:
|
|
|
|
/*
|
|
|
|
* We don't implement MII. For determinism, always return zero as
|
|
|
|
* writes record the last value written for debugging purposes.
|
|
|
|
*/
|
|
|
|
qemu_log_mask(LOG_UNIMP, "%s: Read of MIID, returning 0\n", __func__);
|
|
|
|
result = 0;
|
|
|
|
break;
|
|
|
|
case REG_TSDR:
|
|
|
|
case REG_RSDR:
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
|
|
"%s: Read of write-only reg, %s/%d\n",
|
|
|
|
__func__, emc_reg_name(reg), reg);
|
|
|
|
return 0;
|
|
|
|
default:
|
|
|
|
result = emc->regs[reg];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
trace_npcm7xx_emc_reg_read(emc->emc_num, result, emc_reg_name(reg), reg);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void npcm7xx_emc_write(void *opaque, hwaddr offset,
|
|
|
|
uint64_t v, unsigned size)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCState *emc = opaque;
|
|
|
|
uint32_t reg = offset / sizeof(uint32_t);
|
|
|
|
uint32_t value = v;
|
|
|
|
|
|
|
|
g_assert(size == sizeof(uint32_t));
|
|
|
|
|
|
|
|
if (reg >= NPCM7XX_NUM_EMC_REGS) {
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
|
|
"%s: Invalid offset 0x%04" HWADDR_PRIx "\n",
|
|
|
|
__func__, offset);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
trace_npcm7xx_emc_reg_write(emc->emc_num, emc_reg_name(reg), reg, value);
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case REG_CAMCMR:
|
|
|
|
emc->regs[reg] = value;
|
|
|
|
break;
|
|
|
|
case REG_CAMEN:
|
|
|
|
/* Only CAM0 is supported, don't pretend otherwise. */
|
|
|
|
if (value & ~1) {
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
|
|
"%s: Only CAM0 is supported, cannot enable others"
|
|
|
|
": 0x%x\n",
|
|
|
|
__func__, value);
|
|
|
|
}
|
|
|
|
emc->regs[reg] = value & 1;
|
|
|
|
break;
|
|
|
|
case REG_CAMM_BASE + 0:
|
|
|
|
emc->regs[reg] = value;
|
|
|
|
break;
|
|
|
|
case REG_CAML_BASE + 0:
|
|
|
|
emc->regs[reg] = value;
|
|
|
|
break;
|
|
|
|
case REG_MCMDR: {
|
|
|
|
uint32_t prev;
|
|
|
|
if (value & REG_MCMDR_SWR) {
|
|
|
|
emc_soft_reset(emc);
|
|
|
|
/* On h/w the reset happens over multiple cycles. For now KISS. */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
prev = emc->regs[reg];
|
|
|
|
emc->regs[reg] = value;
|
|
|
|
/* Update tx state. */
|
|
|
|
if (!(prev & REG_MCMDR_TXON) &&
|
|
|
|
(value & REG_MCMDR_TXON)) {
|
|
|
|
emc->regs[REG_CTXDSA] = emc->regs[REG_TXDLSA];
|
|
|
|
/*
|
|
|
|
* Linux kernel turns TX on with CPU still holding descriptor,
|
|
|
|
* which suggests we should wait for a write to TSDR before trying
|
|
|
|
* to send a packet: so we don't send one here.
|
|
|
|
*/
|
|
|
|
} else if ((prev & REG_MCMDR_TXON) &&
|
|
|
|
!(value & REG_MCMDR_TXON)) {
|
|
|
|
emc->regs[REG_MGSTA] |= REG_MGSTA_TXHA;
|
|
|
|
}
|
|
|
|
if (!(value & REG_MCMDR_TXON)) {
|
|
|
|
emc_halt_tx(emc, 0);
|
|
|
|
}
|
|
|
|
/* Update rx state. */
|
|
|
|
if (!(prev & REG_MCMDR_RXON) &&
|
|
|
|
(value & REG_MCMDR_RXON)) {
|
|
|
|
emc->regs[REG_CRXDSA] = emc->regs[REG_RXDLSA];
|
|
|
|
} else if ((prev & REG_MCMDR_RXON) &&
|
|
|
|
!(value & REG_MCMDR_RXON)) {
|
|
|
|
emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA;
|
|
|
|
}
|
2021-03-30 16:05:33 +03:00
|
|
|
if (value & REG_MCMDR_RXON) {
|
2021-12-04 01:10:02 +03:00
|
|
|
emc_enable_rx_and_flush(emc);
|
2021-03-30 16:05:33 +03:00
|
|
|
} else {
|
2021-02-19 00:24:51 +03:00
|
|
|
emc_halt_rx(emc, 0);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case REG_TXDLSA:
|
|
|
|
case REG_RXDLSA:
|
|
|
|
case REG_DMARFC:
|
|
|
|
case REG_MIID:
|
|
|
|
emc->regs[reg] = value;
|
|
|
|
break;
|
|
|
|
case REG_MIEN:
|
|
|
|
emc->regs[reg] = value;
|
|
|
|
emc_update_irq_from_reg_change(emc);
|
|
|
|
break;
|
|
|
|
case REG_MISTA:
|
|
|
|
/* Clear the bits that have 1 in "value". */
|
|
|
|
emc->regs[reg] &= ~value;
|
|
|
|
emc_update_irq_from_reg_change(emc);
|
|
|
|
break;
|
|
|
|
case REG_MGSTA:
|
|
|
|
/* Clear the bits that have 1 in "value". */
|
|
|
|
emc->regs[reg] &= ~value;
|
|
|
|
break;
|
|
|
|
case REG_TSDR:
|
|
|
|
if (emc->regs[REG_MCMDR] & REG_MCMDR_TXON) {
|
|
|
|
emc->tx_active = true;
|
|
|
|
/* Keep trying to send packets until we run out. */
|
|
|
|
while (emc->tx_active) {
|
|
|
|
emc_try_send_next_packet(emc);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case REG_RSDR:
|
|
|
|
if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) {
|
2021-12-04 01:10:02 +03:00
|
|
|
emc_enable_rx_and_flush(emc);
|
2021-02-19 00:24:51 +03:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case REG_MIIDA:
|
|
|
|
emc->regs[reg] = value & ~REG_MIIDA_BUSY;
|
|
|
|
break;
|
|
|
|
case REG_MRPC:
|
|
|
|
case REG_MRPCC:
|
|
|
|
case REG_MREPC:
|
|
|
|
case REG_CTXDSA:
|
|
|
|
case REG_CTXBSA:
|
|
|
|
case REG_CRXDSA:
|
|
|
|
case REG_CRXBSA:
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
|
|
"%s: Write to read-only reg %s/%d\n",
|
|
|
|
__func__, emc_reg_name(reg), reg);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
qemu_log_mask(LOG_UNIMP, "%s: Write to unimplemented reg %s/%d\n",
|
|
|
|
__func__, emc_reg_name(reg), reg);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct MemoryRegionOps npcm7xx_emc_ops = {
|
|
|
|
.read = npcm7xx_emc_read,
|
|
|
|
.write = npcm7xx_emc_write,
|
|
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
|
|
.valid = {
|
|
|
|
.min_access_size = 4,
|
|
|
|
.max_access_size = 4,
|
|
|
|
.unaligned = false,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static void emc_cleanup(NetClientState *nc)
|
|
|
|
{
|
|
|
|
/* Nothing to do yet. */
|
|
|
|
}
|
|
|
|
|
|
|
|
static NetClientInfo net_npcm7xx_emc_info = {
|
|
|
|
.type = NET_CLIENT_DRIVER_NIC,
|
|
|
|
.size = sizeof(NICState),
|
|
|
|
.can_receive = emc_can_receive,
|
|
|
|
.receive = emc_receive,
|
|
|
|
.cleanup = emc_cleanup,
|
|
|
|
.link_status_changed = emc_set_link,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void npcm7xx_emc_realize(DeviceState *dev, Error **errp)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCState *emc = NPCM7XX_EMC(dev);
|
|
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(emc);
|
|
|
|
|
|
|
|
memory_region_init_io(&emc->iomem, OBJECT(emc), &npcm7xx_emc_ops, emc,
|
|
|
|
TYPE_NPCM7XX_EMC, 4 * KiB);
|
|
|
|
sysbus_init_mmio(sbd, &emc->iomem);
|
|
|
|
sysbus_init_irq(sbd, &emc->tx_irq);
|
|
|
|
sysbus_init_irq(sbd, &emc->rx_irq);
|
|
|
|
|
|
|
|
qemu_macaddr_default_if_unset(&emc->conf.macaddr);
|
|
|
|
emc->nic = qemu_new_nic(&net_npcm7xx_emc_info, &emc->conf,
|
2023-06-01 06:18:58 +03:00
|
|
|
object_get_typename(OBJECT(dev)), dev->id,
|
|
|
|
&dev->mem_reentrancy_guard, emc);
|
2021-02-19 00:24:51 +03:00
|
|
|
qemu_format_nic_info_str(qemu_get_queue(emc->nic), emc->conf.macaddr.a);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void npcm7xx_emc_unrealize(DeviceState *dev)
|
|
|
|
{
|
|
|
|
NPCM7xxEMCState *emc = NPCM7XX_EMC(dev);
|
|
|
|
|
|
|
|
qemu_del_nic(emc->nic);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const VMStateDescription vmstate_npcm7xx_emc = {
|
|
|
|
.name = TYPE_NPCM7XX_EMC,
|
|
|
|
.version_id = 0,
|
|
|
|
.minimum_version_id = 0,
|
|
|
|
.fields = (VMStateField[]) {
|
|
|
|
VMSTATE_UINT8(emc_num, NPCM7xxEMCState),
|
|
|
|
VMSTATE_UINT32_ARRAY(regs, NPCM7xxEMCState, NPCM7XX_NUM_EMC_REGS),
|
|
|
|
VMSTATE_BOOL(tx_active, NPCM7xxEMCState),
|
|
|
|
VMSTATE_BOOL(rx_active, NPCM7xxEMCState),
|
|
|
|
VMSTATE_END_OF_LIST(),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static Property npcm7xx_emc_properties[] = {
|
|
|
|
DEFINE_NIC_PROPERTIES(NPCM7xxEMCState, conf),
|
|
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
|
|
};
|
|
|
|
|
|
|
|
static void npcm7xx_emc_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
|
|
|
|
set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
|
|
|
|
dc->desc = "NPCM7xx EMC Controller";
|
|
|
|
dc->realize = npcm7xx_emc_realize;
|
|
|
|
dc->unrealize = npcm7xx_emc_unrealize;
|
|
|
|
dc->reset = npcm7xx_emc_reset;
|
|
|
|
dc->vmsd = &vmstate_npcm7xx_emc;
|
|
|
|
device_class_set_props(dc, npcm7xx_emc_properties);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const TypeInfo npcm7xx_emc_info = {
|
|
|
|
.name = TYPE_NPCM7XX_EMC,
|
|
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
|
|
.instance_size = sizeof(NPCM7xxEMCState),
|
|
|
|
.class_init = npcm7xx_emc_class_init,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void npcm7xx_emc_register_type(void)
|
|
|
|
{
|
|
|
|
type_register_static(&npcm7xx_emc_info);
|
|
|
|
}
|
|
|
|
|
|
|
|
type_init(npcm7xx_emc_register_type)
|