2008-06-09 18:31:18 +04:00
|
|
|
/*
|
|
|
|
* Toshiba TC6393XB I/O Controller.
|
|
|
|
* Found in Sharp Zaurus SL-6000 (tosa) or some
|
|
|
|
* Toshiba e-Series PDAs.
|
|
|
|
*
|
|
|
|
* Most features are currently unsupported!!!
|
|
|
|
*
|
|
|
|
* This code is licensed under the GNU GPL v2.
|
|
|
|
*/
|
2008-06-09 04:03:13 +04:00
|
|
|
#include "hw.h"
|
|
|
|
#include "pxa.h"
|
|
|
|
#include "devices.h"
|
|
|
|
|
|
|
|
#define TC6393XB_GPIOS 16
|
|
|
|
|
|
|
|
#define SCR_REVID 0x08 /* b Revision ID */
|
|
|
|
#define SCR_ISR 0x50 /* b Interrupt Status */
|
|
|
|
#define SCR_IMR 0x52 /* b Interrupt Mask */
|
|
|
|
#define SCR_IRR 0x54 /* b Interrupt Routing */
|
|
|
|
#define SCR_GPER 0x60 /* w GP Enable */
|
|
|
|
#define SCR_GPI_SR(i) (0x64 + (i)) /* b3 GPI Status */
|
|
|
|
#define SCR_GPI_IMR(i) (0x68 + (i)) /* b3 GPI INT Mask */
|
|
|
|
#define SCR_GPI_EDER(i) (0x6c + (i)) /* b3 GPI Edge Detect Enable */
|
|
|
|
#define SCR_GPI_LIR(i) (0x70 + (i)) /* b3 GPI Level Invert */
|
|
|
|
#define SCR_GPO_DSR(i) (0x78 + (i)) /* b3 GPO Data Set */
|
|
|
|
#define SCR_GPO_DOECR(i) (0x7c + (i)) /* b3 GPO Data OE Control */
|
|
|
|
#define SCR_GP_IARCR(i) (0x80 + (i)) /* b3 GP Internal Active Register Control */
|
|
|
|
#define SCR_GP_IARLCR(i) (0x84 + (i)) /* b3 GP INTERNAL Active Register Level Control */
|
|
|
|
#define SCR_GPI_BCR(i) (0x88 + (i)) /* b3 GPI Buffer Control */
|
|
|
|
#define SCR_GPA_IARCR 0x8c /* w GPa Internal Active Register Control */
|
|
|
|
#define SCR_GPA_IARLCR 0x90 /* w GPa Internal Active Register Level Control */
|
|
|
|
#define SCR_GPA_BCR 0x94 /* w GPa Buffer Control */
|
|
|
|
#define SCR_CCR 0x98 /* w Clock Control */
|
|
|
|
#define SCR_PLL2CR 0x9a /* w PLL2 Control */
|
|
|
|
#define SCR_PLL1CR 0x9c /* l PLL1 Control */
|
|
|
|
#define SCR_DIARCR 0xa0 /* b Device Internal Active Register Control */
|
|
|
|
#define SCR_DBOCR 0xa1 /* b Device Buffer Off Control */
|
|
|
|
#define SCR_FER 0xe0 /* b Function Enable */
|
|
|
|
#define SCR_MCR 0xe4 /* w Mode Control */
|
|
|
|
#define SCR_CONFIG 0xfc /* b Configuration Control */
|
|
|
|
#define SCR_DEBUG 0xff /* b Debug */
|
|
|
|
|
|
|
|
struct tc6393xb_s {
|
|
|
|
target_phys_addr_t target_base;
|
|
|
|
struct {
|
|
|
|
uint8_t ISR;
|
|
|
|
uint8_t IMR;
|
|
|
|
uint8_t IRR;
|
|
|
|
uint16_t GPER;
|
|
|
|
uint8_t GPI_SR[3];
|
|
|
|
uint8_t GPI_IMR[3];
|
|
|
|
uint8_t GPI_EDER[3];
|
|
|
|
uint8_t GPI_LIR[3];
|
|
|
|
uint8_t GP_IARCR[3];
|
|
|
|
uint8_t GP_IARLCR[3];
|
|
|
|
uint8_t GPI_BCR[3];
|
|
|
|
uint16_t GPA_IARCR;
|
|
|
|
uint16_t GPA_IARLCR;
|
|
|
|
uint16_t CCR;
|
|
|
|
uint16_t PLL2CR;
|
|
|
|
uint32_t PLL1CR;
|
|
|
|
uint8_t DIARCR;
|
|
|
|
uint8_t DBOCR;
|
|
|
|
uint8_t FER;
|
|
|
|
uint16_t MCR;
|
|
|
|
uint8_t CONFIG;
|
|
|
|
uint8_t DEBUG;
|
|
|
|
} scr;
|
|
|
|
uint32_t gpio_dir;
|
|
|
|
uint32_t gpio_level;
|
|
|
|
uint32_t prev_level;
|
|
|
|
qemu_irq handler[TC6393XB_GPIOS];
|
|
|
|
qemu_irq *gpio_in;
|
|
|
|
};
|
|
|
|
|
|
|
|
qemu_irq *tc6393xb_gpio_in_get(struct tc6393xb_s *s)
|
|
|
|
{
|
|
|
|
return s->gpio_in;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tc6393xb_gpio_set(void *opaque, int line, int level)
|
|
|
|
{
|
|
|
|
// struct tc6393xb_s *s = opaque;
|
|
|
|
|
|
|
|
if (line > TC6393XB_GPIOS) {
|
|
|
|
printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
// FIXME: how does the chip reflect the GPIO input level change?
|
|
|
|
}
|
|
|
|
|
|
|
|
void tc6393xb_gpio_out_set(struct tc6393xb_s *s, int line,
|
|
|
|
qemu_irq handler)
|
|
|
|
{
|
|
|
|
if (line >= TC6393XB_GPIOS) {
|
|
|
|
fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
s->handler[line] = handler;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tc6393xb_gpio_handler_update(struct tc6393xb_s *s)
|
|
|
|
{
|
|
|
|
uint32_t level, diff;
|
|
|
|
int bit;
|
|
|
|
|
|
|
|
level = s->gpio_level & s->gpio_dir;
|
|
|
|
|
|
|
|
for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
|
|
|
|
bit = ffs(diff) - 1;
|
|
|
|
qemu_set_irq(s->handler[bit], (level >> bit) & 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
s->prev_level = level;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define SCR_REG_B(N) \
|
|
|
|
case SCR_ ##N: return s->scr.N
|
|
|
|
#define SCR_REG_W(N) \
|
|
|
|
case SCR_ ##N: return s->scr.N; \
|
|
|
|
case SCR_ ##N + 1: return s->scr.N >> 8;
|
|
|
|
#define SCR_REG_L(N) \
|
|
|
|
case SCR_ ##N: return s->scr.N; \
|
|
|
|
case SCR_ ##N + 1: return s->scr.N >> 8; \
|
|
|
|
case SCR_ ##N + 2: return s->scr.N >> 16; \
|
|
|
|
case SCR_ ##N + 3: return s->scr.N >> 24;
|
|
|
|
#define SCR_REG_A(N) \
|
|
|
|
case SCR_ ##N(0): return s->scr.N[0]; \
|
|
|
|
case SCR_ ##N(1): return s->scr.N[1]; \
|
|
|
|
case SCR_ ##N(2): return s->scr.N[2]
|
|
|
|
|
|
|
|
static uint32_t tc6393xb_readb(void *opaque, target_phys_addr_t addr)
|
|
|
|
{
|
|
|
|
struct tc6393xb_s *s = opaque;
|
|
|
|
addr -= s->target_base;
|
|
|
|
switch (addr) {
|
|
|
|
case SCR_REVID:
|
|
|
|
return 3;
|
|
|
|
case SCR_REVID+1:
|
|
|
|
return 0;
|
|
|
|
SCR_REG_B(ISR);
|
|
|
|
SCR_REG_B(IMR);
|
|
|
|
SCR_REG_B(IRR);
|
|
|
|
SCR_REG_W(GPER);
|
|
|
|
SCR_REG_A(GPI_SR);
|
|
|
|
SCR_REG_A(GPI_IMR);
|
|
|
|
SCR_REG_A(GPI_EDER);
|
|
|
|
SCR_REG_A(GPI_LIR);
|
|
|
|
case SCR_GPO_DSR(0):
|
|
|
|
case SCR_GPO_DSR(1):
|
|
|
|
case SCR_GPO_DSR(2):
|
|
|
|
return (s->gpio_level >> ((addr - SCR_GPO_DSR(0)) * 8)) & 0xff;
|
|
|
|
case SCR_GPO_DOECR(0):
|
|
|
|
case SCR_GPO_DOECR(1):
|
|
|
|
case SCR_GPO_DOECR(2):
|
|
|
|
return (s->gpio_dir >> ((addr - SCR_GPO_DOECR(0)) * 8)) & 0xff;
|
|
|
|
SCR_REG_A(GP_IARCR);
|
|
|
|
SCR_REG_A(GP_IARLCR);
|
|
|
|
SCR_REG_A(GPI_BCR);
|
|
|
|
SCR_REG_W(GPA_IARCR);
|
|
|
|
SCR_REG_W(GPA_IARLCR);
|
|
|
|
SCR_REG_W(CCR);
|
|
|
|
SCR_REG_W(PLL2CR);
|
|
|
|
SCR_REG_L(PLL1CR);
|
|
|
|
SCR_REG_B(DIARCR);
|
|
|
|
SCR_REG_B(DBOCR);
|
|
|
|
SCR_REG_B(FER);
|
|
|
|
SCR_REG_W(MCR);
|
|
|
|
SCR_REG_B(CONFIG);
|
|
|
|
SCR_REG_B(DEBUG);
|
|
|
|
}
|
|
|
|
fprintf(stderr, "tc6393xb: unhandled read at %08x\n", (uint32_t) addr);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#undef SCR_REG_B
|
|
|
|
#undef SCR_REG_W
|
|
|
|
#undef SCR_REG_L
|
|
|
|
#undef SCR_REG_A
|
|
|
|
|
|
|
|
#define SCR_REG_B(N) \
|
|
|
|
case SCR_ ##N: s->scr.N = value; break;
|
|
|
|
#define SCR_REG_W(N) \
|
|
|
|
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); break; \
|
|
|
|
case SCR_ ##N + 1: s->scr.N = (s->scr.N & 0xff) | (value << 8); break
|
|
|
|
#define SCR_REG_L(N) \
|
|
|
|
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); break; \
|
|
|
|
case SCR_ ##N + 1: s->scr.N = (s->scr.N & ~(0xff << 8)) | (value & (0xff << 8)); break; \
|
|
|
|
case SCR_ ##N + 2: s->scr.N = (s->scr.N & ~(0xff << 16)) | (value & (0xff << 16)); break; \
|
|
|
|
case SCR_ ##N + 3: s->scr.N = (s->scr.N & ~(0xff << 24)) | (value & (0xff << 24)); break;
|
|
|
|
#define SCR_REG_A(N) \
|
|
|
|
case SCR_ ##N(0): s->scr.N[0] = value; break; \
|
|
|
|
case SCR_ ##N(1): s->scr.N[1] = value; break; \
|
|
|
|
case SCR_ ##N(2): s->scr.N[2] = value; break
|
|
|
|
|
|
|
|
static void tc6393xb_writeb(void *opaque, target_phys_addr_t addr, uint32_t value)
|
|
|
|
{
|
|
|
|
struct tc6393xb_s *s = opaque;
|
|
|
|
addr -= s->target_base;
|
|
|
|
switch (addr) {
|
|
|
|
SCR_REG_B(ISR);
|
|
|
|
SCR_REG_B(IMR);
|
|
|
|
SCR_REG_B(IRR);
|
|
|
|
SCR_REG_W(GPER);
|
|
|
|
SCR_REG_A(GPI_SR);
|
|
|
|
SCR_REG_A(GPI_IMR);
|
|
|
|
SCR_REG_A(GPI_EDER);
|
|
|
|
SCR_REG_A(GPI_LIR);
|
|
|
|
case SCR_GPO_DSR(0):
|
|
|
|
case SCR_GPO_DSR(1):
|
|
|
|
case SCR_GPO_DSR(2):
|
|
|
|
s->gpio_level = (s->gpio_level & ~(0xff << ((addr - SCR_GPO_DSR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DSR(0))*8));
|
|
|
|
tc6393xb_gpio_handler_update(s);
|
|
|
|
break;
|
|
|
|
case SCR_GPO_DOECR(0):
|
|
|
|
case SCR_GPO_DOECR(1):
|
|
|
|
case SCR_GPO_DOECR(2):
|
|
|
|
s->gpio_dir = (s->gpio_dir & ~(0xff << ((addr - SCR_GPO_DOECR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DOECR(0))*8));
|
|
|
|
tc6393xb_gpio_handler_update(s);
|
|
|
|
break;
|
|
|
|
SCR_REG_A(GP_IARCR);
|
|
|
|
SCR_REG_A(GP_IARLCR);
|
|
|
|
SCR_REG_A(GPI_BCR);
|
|
|
|
SCR_REG_W(GPA_IARCR);
|
|
|
|
SCR_REG_W(GPA_IARLCR);
|
|
|
|
SCR_REG_W(CCR);
|
|
|
|
SCR_REG_W(PLL2CR);
|
|
|
|
SCR_REG_L(PLL1CR);
|
|
|
|
SCR_REG_B(DIARCR);
|
|
|
|
SCR_REG_B(DBOCR);
|
|
|
|
SCR_REG_B(FER);
|
|
|
|
SCR_REG_W(MCR);
|
|
|
|
SCR_REG_B(CONFIG);
|
|
|
|
SCR_REG_B(DEBUG);
|
|
|
|
default:
|
|
|
|
fprintf(stderr, "tc6393xb: unhandled write at %08x: %02x\n",
|
|
|
|
(uint32_t) addr, value & 0xff);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#undef SCR_REG_B
|
|
|
|
#undef SCR_REG_W
|
|
|
|
#undef SCR_REG_L
|
|
|
|
#undef SCR_REG_A
|
|
|
|
|
|
|
|
static uint32_t tc6393xb_readw(void *opaque, target_phys_addr_t addr)
|
|
|
|
{
|
|
|
|
return (tc6393xb_readb(opaque, addr) & 0xff) |
|
|
|
|
(tc6393xb_readb(opaque, addr + 1) << 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t tc6393xb_readl(void *opaque, target_phys_addr_t addr)
|
|
|
|
{
|
|
|
|
return (tc6393xb_readb(opaque, addr) & 0xff) |
|
|
|
|
((tc6393xb_readb(opaque, addr + 1) & 0xff) << 8) |
|
|
|
|
((tc6393xb_readb(opaque, addr + 2) & 0xff) << 16) |
|
|
|
|
((tc6393xb_readb(opaque, addr + 3) & 0xff) << 24);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tc6393xb_writew(void *opaque, target_phys_addr_t addr, uint32_t value)
|
|
|
|
{
|
|
|
|
tc6393xb_writeb(opaque, addr, value);
|
|
|
|
tc6393xb_writeb(opaque, addr + 1, value >> 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tc6393xb_writel(void *opaque, target_phys_addr_t addr, uint32_t value)
|
|
|
|
{
|
|
|
|
tc6393xb_writeb(opaque, addr, value);
|
|
|
|
tc6393xb_writeb(opaque, addr + 1, value >> 8);
|
|
|
|
tc6393xb_writeb(opaque, addr + 2, value >> 16);
|
|
|
|
tc6393xb_writeb(opaque, addr + 3, value >> 24);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct tc6393xb_s *tc6393xb_init(uint32_t base, qemu_irq irq)
|
|
|
|
{
|
|
|
|
int iomemtype;
|
|
|
|
struct tc6393xb_s *s;
|
|
|
|
CPUReadMemoryFunc *tc6393xb_readfn[] = {
|
|
|
|
tc6393xb_readb,
|
|
|
|
tc6393xb_readw,
|
|
|
|
tc6393xb_readl,
|
|
|
|
};
|
|
|
|
CPUWriteMemoryFunc *tc6393xb_writefn[] = {
|
|
|
|
tc6393xb_writeb,
|
|
|
|
tc6393xb_writew,
|
|
|
|
tc6393xb_writel,
|
|
|
|
};
|
|
|
|
|
|
|
|
s = (struct tc6393xb_s *) qemu_mallocz(sizeof(struct tc6393xb_s));
|
|
|
|
s->target_base = base;
|
|
|
|
s->gpio_in = qemu_allocate_irqs(tc6393xb_gpio_set, s, TC6393XB_GPIOS);
|
|
|
|
|
|
|
|
iomemtype = cpu_register_io_memory(0, tc6393xb_readfn,
|
|
|
|
tc6393xb_writefn, s);
|
|
|
|
cpu_register_physical_memory(s->target_base, 0x200000, iomemtype);
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|