qemu/hw/acpi/Makefile.objs

common-obj-$(CONFIG_ACPI_X86) += core.o piix4.o pcihp.o
common-obj-$(CONFIG_ACPI_X86_ICH) += ich9.o tco.o
common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu_hotplug.o
common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o memory_hotplug_acpi_table.o
common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
common-obj-$(CONFIG_ACPI) += acpi_interface.o
common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
common-obj-$(CONFIG_ACPI) += aml-build.o
common-obj-$(call land,$(CONFIG_ACPI),$(CONFIG_IPMI)) += ipmi.o
acpi: split out ICH ACPI support MIPS doesn't need it, and including it creates problem as we are adding dependency on ISA LPC bridge. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2015-07-07 13:00:56 +03:00			`common-obj-$(CONFIG_ACPI_X86) += core.o piix4.o pcihp.o`
ich9: add TCO interface emulation This interface provides some registers within a 32-byte range and can be acessed through PCI-to-LPC bridge interface (PMBASE + 0x60). It's commonly used as a watchdog timer to detect system lockups through SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If NO_REBOOT bit is not set in GCS (General Control and Status register), the system will be resetted upon second timeout if TCO_RLD register wasn't previously written to prevent timeout. This patch adds support to TCO watchdog logic and few other features like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection, etc. are not implemented yet. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2015-06-28 20:58:56 +03:00			`common-obj-$(CONFIG_ACPI_X86_ICH) += ich9.o tco.o`
pc: acpi: consolidate legacy CPU hotplug in one file Since AML part of CPU hotplug is tightly coupled with its hardware part (IO port layout/protocol), move build_legacy_cpu_hotplug_aml() to cpu_hotplug.c and remove empty cpu_hotplug_acpi_table.c Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> 2016-05-17 17:43:01 +03:00			`common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu_hotplug.o`
pc: acpi: memhp: prepare context in SSDT for moving memhp DSDT code Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2015-12-28 20:02:09 +03:00			`common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o memory_hotplug_acpi_table.o`
acpi: cpuhp: add CPU devices AML with _STA method it adds CPU objects to DSDT with _STA method and QEMU side of CPU hotplug interface initialization with registers sufficient to handle _STA requests, including necessary hotplug callbacks in piix4,ich9 code. Hot-(un)plug hw/acpi parts will be added by corresponding follow up patches. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2016-06-14 17:02:06 +03:00			`common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o`
nvdimm acpi: initialize the resource used by NVDIMM ACPI 32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into NVDIMM ACPI binary code OSPM uses this port to tell QEMU the final address of the DSM memory and notify QEMU to emulate the DSM method Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2016-03-04 19:00:32 +03:00			`obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o`
acpi: introduce TYPE_ACPI_DEVICE_IF interface ... it will be used to abstract generic ACPI bits from device that implements ACPI interface. ACPIOSTInfo type is used for passing-through raw _OST event/status codes reported by guest OS to a management layer. It lets management tools interpret values as specified by ACPI spec if it is interested in it. QEMU doesn't encode these values as enum, since it doesn't need to handle them and it allows interface to scale well without any changes in QEMU while guest OS and management evolves in time. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2014-06-16 21:12:26 +04:00			`common-obj-$(CONFIG_ACPI) += acpi_interface.o`
bios-linker-loader: move source to common location There are plans to use bios linker by MIPS, ARM. It's only used by ACPI ATM, so put it in hw/acpi and make it depend on CONFIG_ACPI. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2015-01-20 00:58:55 +03:00			`common-obj-$(CONFIG_ACPI) += bios-linker-loader.o`
acpi: move generic aml building helpers into dedictated file the will be later used for composing AML primitives and all that could be reused later for ARM machines as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2015-01-30 16:29:36 +03:00			`common-obj-$(CONFIG_ACPI) += aml-build.o`
acpi: Add IPMI table entries Use the ACPI table construction tools to create an ACPI entry for IPMI. This adds a function called build_acpi_ipmi_devices to add an DSDT entry for IPMI if IPMI is compiled in and an IPMI device exists. It also adds a dummy function if IPMI is not compiled in. This conforms to section "C3-2 Locating IPMI System Interfaces in ACPI Name Space" in the IPMI 2.0 specification. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2016-06-10 12:15:42 +03:00			`common-obj-$(call land,$(CONFIG_ACPI),$(CONFIG_IPMI)) += ipmi.o`