qemu/hw/i386/ssdt-pcihp.hex.generated

252 lines
2.0 KiB
Plaintext
Raw Normal View History

static unsigned char ssdt_pcihp_name[] = {
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x34
};
static unsigned char ssdt_pcivga_end[] = {
0x99
};
static unsigned char ssdt_pcivga_name[] = {
0x70
};
static unsigned char ssdt_pcihp_adr[] = {
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x45
};
static unsigned char ssdt_pcinohp_end[] = {
0x6d
};
static unsigned char ssdt_pcihp_end[] = {
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x5c
};
static unsigned char ssdt_pciqxl_start[] = {
0x99
};
static unsigned char ssdt_pcinohp_name[] = {
0x5f
};
static unsigned char ssdp_pcihp_aml[] = {
0x53,
0x53,
0x44,
0x54,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0xc6,
0x0,
0x0,
0x0,
0x1,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x6b,
0x42,
0x58,
0x50,
0x43,
0x0,
0x0,
0x42,
0x58,
0x53,
0x53,
0x44,
0x54,
0x50,
0x43,
0x1,
0x0,
0x0,
0x0,
0x49,
0x4e,
0x54,
0x4c,
0x23,
0x8,
0x13,
0x20,
0x10,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x41,
0xa,
0x5c,
0x2e,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x5b,
0x82,
0x29,
0x53,
0x41,
0x41,
0x5f,
0x8,
0x5f,
0x53,
0x55,
0x4e,
0xa,
0xaa,
0x8,
0x5f,
0x41,
0x44,
0x52,
0xc,
0x0,
0x0,
0xaa,
0x0,
0x14,
0x12,
0x5f,
0x45,
0x4a,
0x30,
0x1,
0x50,
0x43,
0x45,
0x4a,
0x42,
0x53,
0x45,
0x4c,
0x5f,
0x53,
0x55,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x4e,
0x5b,
0x82,
0xf,
0x53,
0x42,
0x42,
0x5f,
0x8,
0x5f,
0x41,
0x44,
0x52,
0xc,
0x0,
0x0,
0xaa,
0x0,
0x5b,
0x82,
0x2a,
0x53,
0x43,
0x43,
0x5f,
0x8,
0x5f,
0x41,
0x44,
0x52,
0xc,
0x0,
0x0,
0xaa,
0x0,
0x14,
0x8,
0x5f,
0x53,
0x31,
0x44,
0x0,
0xa4,
0x0,
0x14,
0x8,
0x5f,
0x53,
0x32,
0x44,
0x0,
0xa4,
0x0,
0x14,
0x8,
0x5f,
0x53,
0x33,
0x44,
0x0,
0xa4,
0x0,
0x5b,
0x82,
0x2b,
0x53,
0x44,
0x44,
0x5f,
0x8,
0x5f,
0x41,
0x44,
0x52,
0xc,
0x0,
0x0,
0xaa,
0x0,
0x14,
0x8,
0x5f,
0x53,
0x31,
0x44,
0x0,
0xa4,
0x0,
0x14,
0x8,
0x5f,
0x53,
0x32,
0x44,
0x0,
0xa4,
0x0,
0x14,
0x9,
0x5f,
0x53,
0x33,
0x44,
0x0,
0xa4,
0xa,
0x3
};
static unsigned char ssdt_pciqxl_adr[] = {
0xa6
};
static unsigned char ssdt_pcinohp_adr[] = {
0x69
};
static unsigned char ssdt_pcivga_adr[] = {
0x7a
};
static unsigned char ssdt_pciqxl_name[] = {
0x9c
};
static unsigned char ssdt_pcivga_start[] = {
0x6d
};
static unsigned char ssdt_pciqxl_end[] = {
0xc6
};
static unsigned char ssdt_pcihp_start[] = {
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x31
};
static unsigned char ssdt_pcihp_id[] = {
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x3e
};
static unsigned char ssdt_pcinohp_start[] = {
0x5c
};