mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
47a572865a
qemu/.gitmodules

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

61 lines
2.1 KiB
Plaintext
Raw Normal View History

Bring pcbios, seabios, and vgabios into the tree as git submodules. Right now, they aren't integrated into the build but we can do that incrementally. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 19:13:29 +04:00
[submodule "roms/seabios"]
path = roms/seabios
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/seabios.git/
Add SLOF-based partition firmware for pSeries machine, allowing more boot options Currently, the emulated pSeries machine requires the use of the -kernel parameter in order to explicitly load a guest kernel. This means booting from the virtual disk, cdrom or network is not possible. This patch addresses this limitation by inserting a within-partition firmware image (derived from the "SLOF" free Open Firmware project). If -kernel is not specified, qemu will now load the SLOF image, which has access to the qemu boot device list through the device tree, and can boot from any of the usual virtual devices. In order to support the new firmware, an extension to the emulated machine/hypervisor is necessary. Unlike Linux, which expects multi-CPU entry to be handled kexec() style, the SLOF firmware expects only one CPU to be active at entry, and to use a hypervisor RTAS method to enable the other CPUs one by one. This patch also implements this 'start-cpu' method, so that SLOF can start the secondary CPUs and marshal them into the kexec() holding pattern ready for entry into the guest OS. Linux should, and in the future might directly use the start-cpu method to enable initially disabled CPUs, but for now it does require kexec() entry. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:34 +04:00
[submodule "roms/SLOF"]
path = roms/SLOF
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/SLOF.git
Add ipxe submodule Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2011-04-08 23:03:34 +04:00
[submodule "roms/ipxe"]
path = roms/ipxe
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/ipxe.git
Add OpenBIOS as a submodule Update OpenBIOS images to r1047 built from submodule. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-30 01:13:29 +04:00
[submodule "roms/openbios"]
path = roms/openbios
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/openbios.git
target-alpha: Add custom PALcode image for CLIPPER emulation. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-06-24 22:58:37 +04:00
[submodule "roms/qemu-palcode"]
path = roms/qemu-palcode
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/qemu-palcode.git
dtc: add submodule Add dtc submodule as a fallback for old distros. Picking version 1.3.0. as this is the most recently tagged stable version. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18 08:46:53 +04:00
[submodule "dtc"]
path = dtc
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/dtc.git
PPC: Add u-boot firmware for e500 This adds a special build of u-boot tailored for the e500 platforms we emulate. It is based on the current version of upstream u-boot which contains all the code necessary to drive our QEMU provided machines. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-20 03:25:40 +04:00
[submodule "roms/u-boot"]
path = roms/u-boot
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/u-boot.git
ppc: add skiboot firmware for the pnv platform This is the initial image of skiboot 5.3.7 (commit 762d0082) for the PowerPC PowerNV (Non-Virtualized) platform. Built from submodule. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:34 +03:00
[submodule "roms/skiboot"]
path = roms/skiboot
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/skiboot.git
Add QemuMacDrivers as submodule The QemuMacDrivers project provides virtualisation drivers for PPC MacOS guests. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-01 16:43:30 +03:00
[submodule "roms/QemuMacDrivers"]
path = roms/QemuMacDrivers
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/QemuMacDrivers.git
ui: add keycodemapdb repository as a GIT submodule The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a data file mapping between all the different scancode/keycode/keysym sets that are known, and a tool to auto-generate lookup tables for different combinations. It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys. Using it in QEMU will let us replace many hand written lookup tables with auto-generated tables from a master data source, reducing bugs. Adding new QKeyCodes will now only require the master table to be updated, all ~20 other tables will be automatically updated to follow. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-4-berrange@redhat.com [ kraxel: fix build ] [ kraxel: switch repo to qemu.git mirror ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29 13:11:58 +03:00
[submodule "ui/keycodemapdb"]
path = ui/keycodemapdb
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/keycodemapdb.git
pc-bios: Add hppa-firmware.img and git submodule Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-22 00:04:45 +03:00
[submodule "roms/seabios-hppa"]
path = roms/seabios-hppa
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/seabios-hppa.git
roms: Added git submodule for u-boot-sam460 (firmware for sam460ex) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-02 14:50:14 +03:00
[submodule "roms/u-boot-sam460ex"]
path = roms/u-boot-sam460ex
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/u-boot-sam460ex.git
gitmodules: add berkeley's softfloat + testfloat version 3 These are BSD-licensed so we can add them as submodules. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-09-05 02:31:06 +03:00
[submodule "tests/fp/berkeley-testfloat-3"]
path = tests/fp/berkeley-testfloat-3
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/berkeley-testfloat-3.git
gitmodules: add berkeley's softfloat + testfloat version 3 These are BSD-licensed so we can add them as submodules. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-09-05 02:31:06 +03:00
[submodule "tests/fp/berkeley-softfloat-3"]
path = tests/fp/berkeley-softfloat-3
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/berkeley-softfloat-3.git
roms: add the edk2 project as a git submodule The roms/edk2 submodule can help with three goals: - build the OVMF and ArmVirtQemu virtual UEFI firmware platforms (to be implemented later), - build the EfiRom tool on the fly, which is used in roms/Makefile, for building the "efirom" target, - build UEFI test applications (to be run in guests), for qtest support. Edk2 commit 85588389222a3636baf0f9ed8227f2434af4c3f9 stands for the latest "stable tag", namely "edk2-stable201811". The edk2 repository tracks some binary files that should not be removed by QEMU's top-level "make clean"; exempt the full pathnames from the "find" command. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20190204160325.4914-2-lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-04 19:03:21 +03:00
[submodule "roms/edk2"]
path = roms/edk2
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/edk2.git
roms: Add OpenSBI version 0.4 Add OpenSBI version 0.4 as a git submodule and as a prebult binary. OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source reference implementation of the RISC-V Supervisor Binary Interface (SBI) specifications for platform-specific firmwares executing in M-mode. For all supported platforms, OpenSBI provides several runtime firmware examples. These example firmwares can be used to replace the legacy riscv-pk bootloader and enable the use of well-known bootloaders such as U-Boot. OpenSBI is distributed under the terms of the BSD 2-clause license ("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI source code also contains code reused from other projects desribed here: https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md. In this case all of the code we are using from OpenSBI is BSD 2-clause as we aren't using the Kendryte code (Apache-2.0) with QEMU and libfdt is dual licensed as BSD 2-clause (and GPL-2.0+). OpenSBI isn't being linked with QEMU either it is just being included with QEMU. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-16 21:47:22 +03:00
[submodule "roms/opensbi"]
path = roms/opensbi
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/opensbi.git
roms: add microvm-bios (qboot) as binary and git submodule qboot is a minimalist x86 firmware for booting Linux kernels. It does the mininum amount of work required for the task, and it's able to boot both PVH images and bzImages without relying on option roms. This characteristics make it an ideal companion for the microvm machine type. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-30 18:36:58 +03:00
[submodule "roms/qboot"]
path = roms/qboot
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/qboot.git
roms: Add virtual Boot ROM for NPCM7xx SoCs This is a minimalistic boot ROM written specifically for use with QEMU. It supports loading the second-stage loader from SPI flash into RAM, SMP boot, and not much else. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-7-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:53 +03:00
[submodule "roms/vbootrom"]
path = roms/vbootrom
gitmodules: use GitLab repos instead of qemu.org qemu.org is running out of bandwidth and the QEMU project is moving towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org (they will become mirrors). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-11 14:50:13 +03:00
url = https://gitlab.com/qemu-project/vbootrom.git
tests: integrate lcitool for generating build env manifests This introduces https://gitlab.com/libvirt/libvirt-ci as a git submodule at tests/lcitool/libvirt-ci The 'lcitool' program within this submodule will be used to automatically generate build environment manifests from a definition of requirements in tests/lcitool/projects/qemu.yml It will ultimately be capable of generating - Dockerfiles - Package lists for installation in VMs - Variables for configuring Cirrus CI environments When a new build pre-requisite is needed for QEMU, if this package is not currently known to libvirt-ci, it must first be added to the 'mappings.yml' file in the above git repo. Then the submodule can be updated and the build pre-requisite added to the tests/lcitool/projects/qemu.yml file. Now all the build env manifests can be re-generated using 'make lcitool-refresh' This ensures that when a new build pre-requisite is introduced, it is added to all the different OS containers, VMs and Cirrus CI environments consistently. It also facilitates the addition of containers targetting new distros or updating existing containers to new versions of the same distro, where packages might have been renamed. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20211215141949.3512719-8-berrange@redhat.com> Message-Id: <20220105135009.1584676-8-alex.bennee@linaro.org>
2022-01-05 16:49:42 +03:00
[submodule "tests/lcitool/libvirt-ci"]
path = tests/lcitool/libvirt-ci
gitmodules: Correct libvirt-ci submodule URL Correct the libvirt-ci repository URL to avoid this warning when cloning / refreshing the submodule: warning: redirecting to https://gitlab.com/libvirt/libvirt-ci.git/ Fixes: 4ebb040f1fd ("tests: integrate lcitool for generating build env manifests") Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220121154134.315047-3-f4bug@amsat.org> Message-Id: <20220204204335.1689602-7-alex.bennee@linaro.org>
2022-02-04 23:43:15 +03:00
url = https://gitlab.com/libvirt/libvirt-ci.git
vfio-user: build library add the libvfio-user library as a submodule. build it as a meson subproject. libvfio-user is distributed with BSD 3-Clause license and json-c with MIT (Expat) license Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: c2adec87958b081d1dc8775d4aa05c897912f025.1655151679.git.jag.raman@oracle.com [Changed submodule URL to QEMU's libvfio-user mirror on GitLab. The QEMU project mirrors its dependencies so that it can provide full source code even in the event that its dependencies become unavailable. Note that the mirror repo is manually updated, so please contact me to make newer libvfio-user commits available. If I become a bottleneck we can set up a cronjob. Updated scripts/meson-buildoptions.sh to match the meson_options.txt change. Failure to do so can result in scripts/meson-buildoptions.sh being modified by the build system later on and you end up with a dirty working tree. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-06-13 23:26:24 +03:00
[submodule "subprojects/libvfio-user"]
path = subprojects/libvfio-user
url = https://gitlab.com/qemu-project/libvfio-user.git
Reference in New Issue Copy Permalink