mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4100d5e6dc
qemu/hw/riscv/sifive_u.c

789 lines
32 KiB
C
Raw Normal View History

SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
/*
* QEMU RISC-V Board Compatible with SiFive Freedom U SDK
*
* Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
* Copyright (c) 2017 SiFive, Inc.
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
* Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
*
* Provides a board compatible with the SiFive Freedom U SDK:
*
* 0) UART
* 1) CLINT (Core Level Interruptor)
* 2) PLIC (Platform Level Interrupt Controller)
riscv: sifive_u: Add PRCI block to the SoC Add PRCI mmio base address and size mappings to sifive_u machine, and generate the corresponding device tree node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:10 +03:00
* 3) PRCI (Power, Reset, Clock, Interrupt)
hw/riscv: sifive_u: Hook a GPIO controller SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:36 +03:00
* 4) GPIO (General Purpose Input/Output Controller)
* 5) OTP (One-Time Programmable) memory with stored serial number
* 6) GEM (Gigabit Ethernet Controller) and management block
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
*
riscv: sifive_u: Set the minimum number of cpus to 2 It is not useful if we only have one management CPU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Set default CPUs to 2] Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:05 +03:00
* This board currently generates devicetree dynamically that indicates at least
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
* two harts and up to five harts.
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
riscv/sifive_u: Add a serial property to the sifive_u machine At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2019-11-16 18:08:50 +03:00
#include "qapi/visitor.h"
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
#include "hw/boards.h"
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
#include "hw/irq.h"
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
#include "hw/loader.h"
#include "hw/sysbus.h"
#include "hw/char/serial.h"
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
#include "hw/cpu/cluster.h"
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
#include "hw/misc/unimp.h"
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
#include "target/riscv/cpu.h"
#include "hw/riscv/riscv_hart.h"
#include "hw/riscv/sifive_plic.h"
#include "hw/riscv/sifive_clint.h"
#include "hw/riscv/sifive_uart.h"
#include "hw/riscv/sifive_u.h"
hw/riscv: Split out the boot functions Split the common RISC-V boot functions into a seperate file. This allows us to share the common code. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-25 01:11:49 +03:00
#include "hw/riscv/boot.h"
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
#include "chardev/char.h"
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
#include "net/eth.h"
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
#include "sysemu/arch_init.h"
#include "sysemu/device_tree.h"
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
#include "sysemu/runstate.h"
Include sysemu/sysemu.h a lot less In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-12 08:23:57 +03:00
#include "sysemu/sysemu.h"
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
RISC-V: Mark ROM read-only after copying in code The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-03-04 01:52:13 +03:00
#include <libfdt.h>
riscv: sifive_u: Update BIOS_FILENAME for 32-bit Update BIOS_FILENAME to consider 32-bit bios image file name. Tested booting Linux v5.5 32-bit image (built from rv32_defconfig plus CONFIG_SOC_SIFIVE) with the default 32-bit bios image. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24 16:39:43 +03:00
#if defined(TARGET_RISCV32)
hw/riscv: Use pre-built bios image of generic platform for virt & sifive_u Update virt and sifive_u machines to use the opensbi fw_dynamic bios image built for the generic FDT platform. Remove the out-of-date no longer used bios images. Note: 1. To test 32-bit Linux kernel on QEMU 'sifive_u' 32-bit machine, the following patch is needed: http://lists.infradead.org/pipermail/linux-riscv/2020-July/001213.html 2. To test 64-bit Linux 5.3 kernel on QEMU 'virt' or 'sifive_u' 64-bit machines, the following commit should be cherry-picked to 5.3: commit 922b0375fc93fb1a20c5617e37c389c26bbccb70 Author: Albert Ou <aou@eecs.berkeley.edu> Date: Fri Sep 27 16:14:18 2019 -0700 riscv: Fix memblock reservation for device tree blob Linux 5.4 or above already contains this commit/fix. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-01 16:45:55 +03:00
# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin"
riscv: sifive_u: Update BIOS_FILENAME for 32-bit Update BIOS_FILENAME to consider 32-bit bios image file name. Tested booting Linux v5.5 32-bit image (built from rv32_defconfig plus CONFIG_SOC_SIFIVE) with the default 32-bit bios image. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24 16:39:43 +03:00
#else
hw/riscv: Use pre-built bios image of generic platform for virt & sifive_u Update virt and sifive_u machines to use the opensbi fw_dynamic bios image built for the generic FDT platform. Remove the out-of-date no longer used bios images. Note: 1. To test 32-bit Linux kernel on QEMU 'sifive_u' 32-bit machine, the following patch is needed: http://lists.infradead.org/pipermail/linux-riscv/2020-July/001213.html 2. To test 64-bit Linux 5.3 kernel on QEMU 'virt' or 'sifive_u' 64-bit machines, the following commit should be cherry-picked to 5.3: commit 922b0375fc93fb1a20c5617e37c389c26bbccb70 Author: Albert Ou <aou@eecs.berkeley.edu> Date: Fri Sep 27 16:14:18 2019 -0700 riscv: Fix memblock reservation for device tree blob Linux 5.4 or above already contains this commit/fix. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-01 16:45:55 +03:00
# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin"
riscv: sifive_u: Update BIOS_FILENAME for 32-bit Update BIOS_FILENAME to consider 32-bit bios image file name. Tested booting Linux v5.5 32-bit image (built from rv32_defconfig plus CONFIG_SOC_SIFIVE) with the default 32-bit bios image. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24 16:39:43 +03:00
#endif
hw/riscv: Load OpenSBI as the default firmware If the user hasn't specified a firmware to load (with -bios) or specified no bios (with -bios none) then load OpenSBI by default. This allows users to boot a RISC-V kernel with just -kernel. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-16 21:47:25 +03:00
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
static const struct MemmapEntry {
hwaddr base;
hwaddr size;
} sifive_u_memmap[] = {
[SIFIVE_U_DEBUG] = { 0x0, 0x100 },
hw/riscv: Modify MROM size to end at 0x10000 At present the size of Mask ROM for sifive_u / spike / virt machines is set to 0x11000, which ends at an unusual address. This changes the size to 0xf000 so that it ends at 0x10000. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1594289144-24723-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-09 13:05:43 +03:00
[SIFIVE_U_MROM] = { 0x1000, 0xf000 },
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
[SIFIVE_U_CLINT] = { 0x2000000, 0x10000 },
hw/riscv: sifive_u: Add a dummy L2 cache controller device It is enough to simply map the SiFive FU540 L2 cache controller into the MMIO space using create_unimplemented_device(), with an FDT fragment generated, to make the latest upstream U-Boot happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1595227748-24720-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-20 09:49:08 +03:00
[SIFIVE_U_L2CC] = { 0x2010000, 0x1000 },
riscv/sifive_u: Add L2-LIM cache memory On reset only a single L2 cache way is enabled, the others are exposed as memory that can be used by early boot firmware. This L2 region is generally disabled using the WayEnable register at a later stage in the boot process. To allow firmware to target QEMU and the HiFive Unleashed let's add the L2 LIM (LooselyIntegrated Memory). Ideally we would want to adjust the size of this chunk of memory as the L2 Cache Controller WayEnable register is incremented. Unfortunately I don't see a nice way to handle reducing or blocking out the L2 LIM while still allowing it be re returned to all enabled from a reset. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:07 +03:00
[SIFIVE_U_L2LIM] = { 0x8000000, 0x2000000 },
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
[SIFIVE_U_PLIC] = { 0xc000000, 0x4000000 },
riscv: sifive_u: Add PRCI block to the SoC Add PRCI mmio base address and size mappings to sifive_u machine, and generate the corresponding device tree node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:10 +03:00
[SIFIVE_U_PRCI] = { 0x10000000, 0x1000 },
riscv: sifive_u: Update UART base addresses and IRQs This updates the UART base address and IRQs to match the hardware. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:12 +03:00
[SIFIVE_U_UART0] = { 0x10010000, 0x1000 },
[SIFIVE_U_UART1] = { 0x10011000, 0x1000 },
hw/riscv: sifive_u: Hook a GPIO controller SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:36 +03:00
[SIFIVE_U_GPIO] = { 0x10060000, 0x1000 },
riscv: sifive_u: Instantiate OTP memory with a serial number This adds an OTP memory with a given serial number to the sifive_u machine. With such support, the upstream U-Boot for sifive_fu540 boots out of the box on the sifive_u machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:16 +03:00
[SIFIVE_U_OTP] = { 0x10070000, 0x1000 },
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
[SIFIVE_U_GEM] = { 0x10090000, 0x2000 },
[SIFIVE_U_GEM_MGMT] = { 0x100a0000, 0x1000 },
hw/riscv: sifive_u: Add a dummy DDR memory controller device It is enough to simply map the SiFive FU540 DDR memory controller into the MMIO space using create_unimplemented_device(), to make the upstream U-Boot v2020.07 DDR memory initialization codes happy. Note we do not generate device tree fragment for the DDR memory controller. Since the controller data in device tree consumes a very large space (see fu540-hifive-unleashed-a00-ddr.dtsi in the U-Boot source), and it is only needed by U-Boot SPL but not any operating system, we choose not to generate the fragment here. This also means when testing with U-Boot SPL, the device tree has to come from U-Boot SPL itself, but not the one generated by QEMU on the fly. The memory has to be set to 8GiB to match the real HiFive Unleashed board when invoking QEMU (-m 8G). With this commit, QEMU can boot U-Boot SPL built for SiFive FU540 all the way up to loading U-Boot proper from MMC: $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800) Trying to boot from MMC1 Unhandled exception: Load access fault EPC: 0000000008009be6 TVAL: 0000000010050014 The above exception is expected because QSPI is unsupported yet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-16 03:50:41 +03:00
[SIFIVE_U_DMC] = { 0x100b0000, 0x10000 },
hw/riscv: sifive_u: Sort the SoC memmap table entries Move the flash and DRAM to the end of the SoC memmap table. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-5-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-16 03:50:40 +03:00
[SIFIVE_U_FLASH0] = { 0x20000000, 0x10000000 },
[SIFIVE_U_DRAM] = { 0x80000000, 0x0 },
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
};
riscv: sifive_u: Instantiate OTP memory with a serial number This adds an OTP memory with a given serial number to the sifive_u machine. With such support, the upstream U-Boot for sifive_fu540 boots out of the box on the sifive_u machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:16 +03:00
#define OTP_SERIAL 1
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
#define GEM_REVISION 0x10070109
riscv: hw: Change create_fdt() to return void There is no need to return fdt at the end of create_fdt() because it's already saved in s->fdt. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:53 +03:00
static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
uint64_t mem_size, const char *cmdline)
{
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
MachineState *ms = MACHINE(qdev_get_machine());
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
void *fdt;
int cpu;
uint32_t *cells;
char *nodename;
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Now that we have added a PRCI node, update existing UART and ethernet nodes to reference PRCI as their clock sources, to keep in sync with the Linux kernel device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:11 +03:00
char ethclk_names[] = "pclk\0hclk";
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
fdt = s->fdt = create_device_tree(&s->fdt_size);
if (!fdt) {
error_report("create_device_tree() failed");
exit(1);
}
riscv: sifive_u: Update model and compatible strings in device tree This updates model and compatible strings to use the same strings as used in the Linux kernel device tree (hifive-unleashed-a00.dts). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:19 +03:00
qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00");
qemu_fdt_setprop_string(fdt, "/", "compatible",
"sifive,hifive-unleashed-a00");
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
qemu_fdt_add_subnode(fdt, "/soc");
qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0);
hw/riscv/sifive_u: Set the soc device tree node as a simple-bus To allow Linux to ennumerate devices on the /soc/ node set it as a "simple-bus". Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-05-11 20:22:48 +03:00
qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus");
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
riscv: sifive_u: Generate hfclk and rtcclk nodes To keep in sync with Linux kernel device tree, generate hfclk and rtcclk nodes in the device tree, to be referenced by PRCI node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:09 +03:00
hfclk_phandle = phandle++;
nodename = g_strdup_printf("/hfclk");
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle);
qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk");
qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
SIFIVE_U_HFCLK_FREQ);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
g_free(nodename);
rtcclk_phandle = phandle++;
nodename = g_strdup_printf("/rtcclk");
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle);
qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk");
qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
SIFIVE_U_RTCCLK_FREQ);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
g_free(nodename);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
nodename = g_strdup_printf("/memory@%lx",
(long)memmap[SIFIVE_U_DRAM].base);
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cells(fdt, nodename, "reg",
memmap[SIFIVE_U_DRAM].base >> 32, memmap[SIFIVE_U_DRAM].base,
mem_size >> 32, mem_size);
qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
g_free(nodename);
qemu_fdt_add_subnode(fdt, "/cpus");
RISC-V: Replace hardcoded constants with enum values The RISC-V device-tree code has a number of hard-coded constants and this change moves them into header enums. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-03-03 04:30:07 +03:00
qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
SIFIVE_CLINT_TIMEBASE_FREQ);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) {
riscv: sifive_u: Do not create hard-coded phandles in DT At present the cpu, plic and ethclk nodes' phandles are hard-coded to 1/2/3 in DT. If we configure more than 1 cpu for the machine, all cpu nodes' phandles conflict with each other as they are all 1. Fix it by removing the hardcode. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:24 +03:00
int cpu_phandle = phandle++;
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
char *isa;
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_add_subnode(fdt, nodename);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
/* cpu 0 is the management hart that does not have mmu */
if (cpu != 0) {
hw/riscv: Generate correct "mmu-type" for 32-bit machines 32-bit machine should have its CPU's "mmu-type" set to "riscv,sv32". Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1583585319-26603-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1583585319-26603-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-03-07 15:48:39 +03:00
#if defined(TARGET_RISCV32)
qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
#else
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
hw/riscv: Generate correct "mmu-type" for 32-bit machines 32-bit machine should have its CPU's "mmu-type" set to "riscv,sv32". Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1583585319-26603-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1583585319-26603-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-03-07 15:48:39 +03:00
#endif
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
} else {
isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
}
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv");
qemu_fdt_setprop_string(fdt, nodename, "status", "okay");
qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu);
qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
qemu_fdt_add_subnode(fdt, intc);
riscv: sifive_u: Do not create hard-coded phandles in DT At present the cpu, plic and ethclk nodes' phandles are hard-coded to 1/2/3 in DT. If we configure more than 1 cpu for the machine, all cpu nodes' phandles conflict with each other as they are all 1. Fix it by removing the hardcode. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:24 +03:00
qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
g_free(isa);
g_free(intc);
g_free(nodename);
}
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
cells = g_new0(uint32_t, ms->smp.cpus * 4);
for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
nodename =
g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
g_free(nodename);
}
nodename = g_strdup_printf("/soc/clint@%lx",
(long)memmap[SIFIVE_U_CLINT].base);
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0");
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_CLINT].base,
0x0, memmap[SIFIVE_U_CLINT].size);
qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
cells, ms->smp.cpus * sizeof(uint32_t) * 4);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
g_free(cells);
g_free(nodename);
hw/riscv: sifive_u: Generate device tree node for OTP Upstream U-Boot v2020.07 codes switch to access SiFive FU540 OTP based on device tree information. Let's generate the device tree node for OTP. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-5-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:33 +03:00
nodename = g_strdup_printf("/soc/otp@%lx",
(long)memmap[SIFIVE_U_OTP].base);
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE);
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_OTP].base,
0x0, memmap[SIFIVE_U_OTP].size);
qemu_fdt_setprop_string(fdt, nodename, "compatible",
"sifive,fu540-c000-otp");
g_free(nodename);
riscv: sifive_u: Add PRCI block to the SoC Add PRCI mmio base address and size mappings to sifive_u machine, and generate the corresponding device tree node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:10 +03:00
prci_phandle = phandle++;
nodename = g_strdup_printf("/soc/clock-controller@%lx",
(long)memmap[SIFIVE_U_PRCI].base);
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
qemu_fdt_setprop_cells(fdt, nodename, "clocks",
hfclk_phandle, rtcclk_phandle);
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_PRCI].base,
0x0, memmap[SIFIVE_U_PRCI].size);
qemu_fdt_setprop_string(fdt, nodename, "compatible",
"sifive,fu540-c000-prci");
g_free(nodename);
riscv: sifive_u: Do not create hard-coded phandles in DT At present the cpu, plic and ethclk nodes' phandles are hard-coded to 1/2/3 in DT. If we configure more than 1 cpu for the machine, all cpu nodes' phandles conflict with each other as they are all 1. Fix it by removing the hardcode. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:24 +03:00
plic_phandle = phandle++;
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
cells = g_new0(uint32_t, ms->smp.cpus * 4 - 2);
for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
nodename =
g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
/* cpu 0 is the management hart that does not have S-mode */
if (cpu == 0) {
cells[0] = cpu_to_be32(intc_phandle);
cells[1] = cpu_to_be32(IRQ_M_EXT);
} else {
cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle);
cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT);
cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT);
}
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
g_free(nodename);
}
nodename = g_strdup_printf("/soc/interrupt-controller@%lx",
(long)memmap[SIFIVE_U_PLIC].base);
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0");
qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_PLIC].base,
0x0, memmap[SIFIVE_U_PLIC].size);
hw/riscv/sifive_u: Set the interrupt controller number of interrupts Set the interrupt-controller ndev to the correct number taken from the HiFive Unleashed board. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-05-11 20:24:00 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35);
riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Some of the properties only have 1 cell so we should use qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:51 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
g_free(cells);
g_free(nodename);
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
gpio_phandle = phandle++;
hw/riscv: sifive_u: Hook a GPIO controller SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:36 +03:00
nodename = g_strdup_printf("/soc/gpio@%lx",
(long)memmap[SIFIVE_U_GPIO].base);
qemu_fdt_add_subnode(fdt, nodename);
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle);
hw/riscv: sifive_u: Hook a GPIO controller SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:36 +03:00
qemu_fdt_setprop_cells(fdt, nodename, "clocks",
prci_phandle, PRCI_CLK_TLCLK);
qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2);
qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2);
qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0);
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_GPIO].base,
0x0, memmap[SIFIVE_U_GPIO].size);
qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0,
SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3,
SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6,
SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9,
SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12,
SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15);
qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0");
g_free(nodename);
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
nodename = g_strdup_printf("/gpio-restart");
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart");
g_free(nodename);
hw/riscv: sifive_u: Add a dummy L2 cache controller device It is enough to simply map the SiFive FU540 L2 cache controller into the MMIO space using create_unimplemented_device(), with an FDT fragment generated, to make the latest upstream U-Boot happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1595227748-24720-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-20 09:49:08 +03:00
nodename = g_strdup_printf("/soc/cache-controller@%lx",
(long)memmap[SIFIVE_U_L2CC].base);
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_L2CC].base,
0x0, memmap[SIFIVE_U_L2CC].size);
qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2);
qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0);
qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152);
qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024);
qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2);
qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64);
qemu_fdt_setprop_string(fdt, nodename, "compatible",
"sifive,fu540-c000-ccache");
g_free(nodename);
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
phy_phandle = phandle++;
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
nodename = g_strdup_printf("/soc/ethernet@%lx",
(long)memmap[SIFIVE_U_GEM].base);
qemu_fdt_add_subnode(fdt, nodename);
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
qemu_fdt_setprop_string(fdt, nodename, "compatible",
"sifive,fu540-c000-gem");
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_GEM].base,
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
0x0, memmap[SIFIVE_U_GEM].size,
0x0, memmap[SIFIVE_U_GEM_MGMT].base,
0x0, memmap[SIFIVE_U_GEM_MGMT].size);
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle);
riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Some of the properties only have 1 cell so we should use qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:51 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
sifive_u: Add clock DT node for GEM ethernet The GEM ethernet on SiFive unleashed has fixed input clock of 125MHz as-per SiFive FU540 manual. This patch updates FDT generation for QEMU sifive_u machine to provide fixed-rate clock for GEM ethernet. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-13 21:34:52 +03:00
qemu_fdt_setprop_cells(fdt, nodename, "clocks",
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Now that we have added a PRCI node, update existing UART and ethernet nodes to reference PRCI as their clock sources, to keep in sync with the Linux kernel device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:11 +03:00
prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
riscv: sifive_u: Fix clock-names property for ethernet node The correct property name is clock-names, not clocks-names. Without this patch, the Ethernet driver fails to instantiate with the following error. macb 100900fc.ethernet: failed to get macb_clk (-2) macb: probe of 100900fc.ethernet failed with error -2 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-19 16:40:45 +03:00
qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names,
sifive_u: Add clock DT node for GEM ethernet The GEM ethernet on SiFive unleashed has fixed input clock of 125MHz as-per SiFive FU540 manual. This patch updates FDT generation for QEMU sifive_u machine to provide fixed-rate clock for GEM ethernet. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-13 21:34:52 +03:00
sizeof(ethclk_names));
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
qemu_fdt_setprop(fdt, nodename, "local-mac-address",
s->soc.gem.conf.macaddr.a, ETH_ALEN);
riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Some of the properties only have 1 cell so we should use qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:51 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
riscv: sifive_u: Add ethernet0 to the aliases node U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. This is to keep in sync with Linux kernel commit below: https://patchwork.kernel.org/patch/11133033/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-21 08:41:31 +03:00
qemu_fdt_add_subnode(fdt, "/aliases");
qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename);
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
g_free(nodename);
nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
(long)memmap[SIFIVE_U_GEM].base);
qemu_fdt_add_subnode(fdt, nodename);
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle);
riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Some of the properties only have 1 cell so we should use qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:51 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
g_free(nodename);
riscv: sifive_u: Change UART node name in device tree OpenSBI for fu540 does DT fix up (see fu540_modify_dt()) by updating chosen "stdout-path" to point to "/soc/serial@...", and U-Boot will use this information to locate the serial node and probe its driver. However currently we generate the UART node name as "/soc/uart@...", causing U-Boot fail to find the serial node in DT. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:13 +03:00
nodename = g_strdup_printf("/soc/serial@%lx",
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
(long)memmap[SIFIVE_U_UART0].base);
qemu_fdt_add_subnode(fdt, nodename);
qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_UART0].base,
0x0, memmap[SIFIVE_U_UART0].size);
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Now that we have added a PRCI node, update existing UART and ethernet nodes to reference PRCI as their clock sources, to keep in sync with the Linux kernel device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:11 +03:00
qemu_fdt_setprop_cells(fdt, nodename, "clocks",
prci_phandle, PRCI_CLK_TLCLK);
riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Some of the properties only have 1 cell so we should use qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:51 +03:00
qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
qemu_fdt_add_subnode(fdt, "/chosen");
qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename);
RISC-V: Don't add NULL bootargs to device-tree Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-05-22 04:33:28 +03:00
if (cmdline) {
qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline);
}
riscv: sivive_u: Add dummy serial clock and aliases entry for uart The riscv uart needs valid clocks. This requires a refereence to the clock node. Since the SOC clock is not emulated by qemu, add a reference to a fixed clock instead. The clock-frequency entry in the uart node does not seem to be necessary, so drop it. In addition to a reference to the clock, the driver also needs an aliases entry for the serial node. Add it as well. Without this patch, the serial driver fails to instantiate with the following error message. sifive-serial 10013000.uart: unable to find controller clock sifive-serial: probe of 10013000.uart failed with error -2 when trying to boot Linux. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-19 16:40:44 +03:00
qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
g_free(nodename);
}
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
static void sifive_u_machine_reset(void *opaque, int n, int level)
{
/* gpio pin active low triggers reset */
if (!level) {
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
}
}
riscv/sifive_u: Fix up file ordering Split the file into clear machine and SoC sections. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-03 01:57:22 +03:00
static void sifive_u_machine_init(MachineState *machine)
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
{
const struct MemmapEntry *memmap = sifive_u_memmap;
riscv/sifive_u: Manually define the machine Instead of using the DEFINE_MACHINE() macro to define the machine let's do it manually. This allows us to specify machine properties. This patch is no functional change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:14 +03:00
SiFiveUState *s = RISCV_U_MACHINE(machine);
RISC-V: Mark ROM read-only after copying in code The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-03-04 01:52:13 +03:00
MemoryRegion *system_memory = get_system_memory();
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
MemoryRegion *main_mem = g_new(MemoryRegion, 1);
riscv/sifive_u: Add QSPI memory region The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no model of this in QEMU, so to allow boot firmware developers to use QEMU to target the Unleashed let's add a chunk of memory to represent the QSPI0 memory mapped flash. This can be targeted using QEMU's -device loader command line option. In the future we can look at adding a model for the is25wp256 flash. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:11 +03:00
MemoryRegion *flash0 = g_new(MemoryRegion, 1);
riscv/sifive_u: Add the start-in-flash property Add a property that when set to true QEMU will jump from the ROM code to the start of flash memory instead of DRAM which is the default behaviour. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:18 +03:00
target_ulong start_addr = memmap[SIFIVE_U_DRAM].base;
RISC-V: Support 64 bit start address Even though the start address in ROM code is declared as a 64 bit address for RV64, it can't be used as upper bits are set to zero in ROM code. Update the ROM code correctly to reflect the 64bit value. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-5-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:49 +03:00
uint32_t start_addr_hi32 = 0x00000000;
RISC-V: Mark ROM read-only after copying in code The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-03-04 01:52:13 +03:00
int i;
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
uint32_t fdt_load_addr;
riscv: Add opensbi firmware dynamic support OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:48 +03:00
uint64_t kernel_entry;
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
/* Initialize SoC */
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 08:32:25 +03:00
object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_uint(OBJECT(&s->soc), "serial", s->serial,
&error_abort);
qdev: Convert bus-less devices to qdev_realize() with Coccinelle All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-10 08:32:45 +03:00
qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
/* register RAM */
memory_region_init_ram(main_mem, NULL, "riscv.sifive.u.ram",
machine->ram_size, &error_fatal);
RISC-V: Mark ROM read-only after copying in code The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-03-04 01:52:13 +03:00
memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DRAM].base,
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
main_mem);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
riscv/sifive_u: Add QSPI memory region The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no model of this in QEMU, so to allow boot firmware developers to use QEMU to target the Unleashed let's add a chunk of memory to represent the QSPI0 memory mapped flash. This can be targeted using QEMU's -device loader command line option. In the future we can look at adding a model for the is25wp256 flash. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:11 +03:00
/* register QSPI0 Flash */
memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0",
memmap[SIFIVE_U_FLASH0].size, &error_fatal);
memory_region_add_subregion(system_memory, memmap[SIFIVE_U_FLASH0].base,
flash0);
hw/riscv: sifive_u: Add reset functionality The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:38 +03:00
/* register gpio-restart */
qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10,
qemu_allocate_irq(sifive_u_machine_reset, NULL, 0));
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
/* create device tree */
riscv: hw: Change create_fdt() to return void There is no need to return fdt at the end of create_fdt() because it's already saved in s->fdt. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:53 +03:00
create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
hw/riscv: sifive_u: Support different boot source per MSEL pin state SiFive FU540 SoC supports booting from several sources, which are controlled using the Mode Select (MSEL[3:0]) pins on the chip. Typically, the boot process runs through several stages before it begins execution of user-provided programs. The SoC supports booting from memory-mapped QSPI flash, which is how start_in_flash property is used for at present. This matches MSEL = 1 configuration (QSPI0). Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL). It's not necessary for QEMU to implement the full ZSBL ROM codes, because we know ZSBL downloads the next stage program into the L2 LIM at address 0x8000000 and executes from there. We can bypass the whole ZSBL execution and use "-bios" to load the next stage program directly if MSEL indicates a ZSBL booting flow. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-16 03:50:39 +03:00
if (s->start_in_flash) {
/*
* If start_in_flash property is given, assign s->msel to a value
* that representing booting from QSPI0 memory-mapped flash.
*
* This also means that when both start_in_flash and msel properties
* are given, start_in_flash takes the precedence over msel.
*
* Note this is to keep backward compatibility not to break existing
* users that use start_in_flash property.
*/
s->msel = MSEL_MEMMAP_QSPI0_FLASH;
}
switch (s->msel) {
case MSEL_MEMMAP_QSPI0_FLASH:
start_addr = memmap[SIFIVE_U_FLASH0].base;
break;
case MSEL_L2LIM_QSPI0_FLASH:
case MSEL_L2LIM_QSPI2_SD:
start_addr = memmap[SIFIVE_U_L2LIM].base;
break;
default:
start_addr = memmap[SIFIVE_U_DRAM].base;
break;
}
riscv_find_and_load_firmware(machine, BIOS_FILENAME, start_addr, NULL);
hw/riscv: Add support for loading a firmware Add support for loading a firmware file for the virt machine and the SiFive U. This can be run with the following command: qemu-system-riscv64 -machine virt -bios fw_jump.bin -kernel vmlinux Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-25 01:11:52 +03:00
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
if (machine->kernel_filename) {
riscv: Add opensbi firmware dynamic support OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:48 +03:00
kernel_entry = riscv_load_kernel(machine->kernel_filename, NULL);
riscv: sifive_u: Add support for loading initrd Add support for loading initrd with "-initrd <filename>" to the sifive_u machine. This lets us boot into Linux without disk drive. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-19 16:40:43 +03:00
if (machine->initrd_filename) {
hwaddr start;
hwaddr end = riscv_load_initrd(machine->initrd_filename,
machine->ram_size, kernel_entry,
&start);
riscv: hw: Change create_fdt() to return void There is no need to return fdt at the end of create_fdt() because it's already saved in s->fdt. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:53 +03:00
qemu_fdt_setprop_cell(s->fdt, "/chosen",
riscv: sifive_u: Add support for loading initrd Add support for loading initrd with "-initrd <filename>" to the sifive_u machine. This lets us boot into Linux without disk drive. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-19 16:40:43 +03:00
"linux,initrd-start", start);
riscv: hw: Change create_fdt() to return void There is no need to return fdt at the end of create_fdt() because it's already saved in s->fdt. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:19:53 +03:00
qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end",
riscv: sifive_u: Add support for loading initrd Add support for loading initrd with "-initrd <filename>" to the sifive_u machine. This lets us boot into Linux without disk drive. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-19 16:40:43 +03:00
end);
}
riscv: Add opensbi firmware dynamic support OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:48 +03:00
} else {
/*
* If dynamic firmware is used, it doesn't know where is the next mode
* if kernel argument is not set.
*/
kernel_entry = 0;
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
}
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
/* Compute the fdt load address in dram */
fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DRAM].base,
machine->ram_size, s->fdt);
RISC-V: Support 64 bit start address Even though the start address in ROM code is declared as a 64 bit address for RV64, it can't be used as upper bits are set to zero in ROM code. Update the ROM code correctly to reflect the 64bit value. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-5-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:49 +03:00
#if defined(TARGET_RISCV64)
start_addr_hi32 = start_addr >> 32;
#endif
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
/* reset vector */
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
uint32_t reset_vec[11] = {
hw/riscv: sifive_u: Support different boot source per MSEL pin state SiFive FU540 SoC supports booting from several sources, which are controlled using the Mode Select (MSEL[3:0]) pins on the chip. Typically, the boot process runs through several stages before it begins execution of user-provided programs. The SoC supports booting from memory-mapped QSPI flash, which is how start_in_flash property is used for at present. This matches MSEL = 1 configuration (QSPI0). Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL). It's not necessary for QEMU to implement the full ZSBL ROM codes, because we know ZSBL downloads the next stage program into the L2 LIM at address 0x8000000 and executes from there. We can bypass the whole ZSBL execution and use "-bios" to load the next stage program directly if MSEL indicates a ZSBL booting flow. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-16 03:50:39 +03:00
s->msel, /* MSEL pin state */
riscv: Add opensbi firmware dynamic support OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:48 +03:00
0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */
0x02828613, /* addi a2, t0, %pcrel_lo(1b) */
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
0xf1402573, /* csrr a0, mhartid */
#if defined(TARGET_RISCV32)
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
0x0202a583, /* lw a1, 32(t0) */
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
0x0182a283, /* lw t0, 24(t0) */
#elif defined(TARGET_RISCV64)
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
0x0202b583, /* ld a1, 32(t0) */
0x0182b283, /* ld t0, 24(t0) */
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
#endif
0x00028067, /* jr t0 */
riscv/sifive_u: Add the start-in-flash property Add a property that when set to true QEMU will jump from the ROM code to the start of flash memory instead of DRAM which is the default behaviour. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:18 +03:00
start_addr, /* start: .dword */
RISC-V: Support 64 bit start address Even though the start address in ROM code is declared as a 64 bit address for RV64, it can't be used as upper bits are set to zero in ROM code. Update the ROM code correctly to reflect the 64bit value. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-5-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:49 +03:00
start_addr_hi32,
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
fdt_load_addr, /* fdt_laddr: .dword */
0x00000000,
riscv: Add opensbi firmware dynamic support OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:48 +03:00
/* fw_dyn: */
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
};
RISC-V: Mark ROM read-only after copying in code The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-03-04 01:52:13 +03:00
/* copy in the reset vector in little_endian byte order */
RISC-V: Copy the fdt in dram instead of ROM Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:47 +03:00
for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
RISC-V: Mark ROM read-only after copying in code The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-03-04 01:52:13 +03:00
reset_vec[i] = cpu_to_le32(reset_vec[i]);
}
rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
memmap[SIFIVE_U_MROM].base, &address_space_memory);
riscv: Add opensbi firmware dynamic support OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-01 21:39:48 +03:00
riscv_rom_copy_firmware_info(memmap[SIFIVE_U_MROM].base,
memmap[SIFIVE_U_MROM].size,
sizeof(reset_vec), kernel_entry);
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
}
riscv/sifive_u: Fix up file ordering Split the file into clear machine and SoC sections. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-03 01:57:22 +03:00
static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp)
{
SiFiveUState *s = RISCV_U_MACHINE(obj);
return s->start_in_flash;
}
static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp)
{
SiFiveUState *s = RISCV_U_MACHINE(obj);
s->start_in_flash = value;
}
hw/riscv: sifive_u: Rename serial property get/set functions to a generic name In prepration to add more properties to this machine, rename the existing serial property get/set functions to a generic name. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-11-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:39 +03:00
static void sifive_u_machine_get_uint32_prop(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
riscv/sifive_u: Add a serial property to the sifive_u machine At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2019-11-16 18:08:50 +03:00
{
visit_type_uint32(v, name, (uint32_t *)opaque, errp);
}
hw/riscv: sifive_u: Rename serial property get/set functions to a generic name In prepration to add more properties to this machine, rename the existing serial property get/set functions to a generic name. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-11-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:39 +03:00
static void sifive_u_machine_set_uint32_prop(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
riscv/sifive_u: Add a serial property to the sifive_u machine At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2019-11-16 18:08:50 +03:00
{
visit_type_uint32(v, name, (uint32_t *)opaque, errp);
}
riscv/sifive_u: Fix up file ordering Split the file into clear machine and SoC sections. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-03 01:57:22 +03:00
static void sifive_u_machine_instance_init(Object *obj)
{
SiFiveUState *s = RISCV_U_MACHINE(obj);
s->start_in_flash = false;
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
object_property_add_bool(obj, "start-in-flash",
sifive_u_machine_get_start_in_flash,
sifive_u_machine_set_start_in_flash);
riscv/sifive_u: Fix up file ordering Split the file into clear machine and SoC sections. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-03 01:57:22 +03:00
object_property_set_description(obj, "start-in-flash",
"Set on to tell QEMU's ROM to jump to "
hw/riscv: sifive_u: Support different boot source per MSEL pin state SiFive FU540 SoC supports booting from several sources, which are controlled using the Mode Select (MSEL[3:0]) pins on the chip. Typically, the boot process runs through several stages before it begins execution of user-provided programs. The SoC supports booting from memory-mapped QSPI flash, which is how start_in_flash property is used for at present. This matches MSEL = 1 configuration (QSPI0). Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL). It's not necessary for QEMU to implement the full ZSBL ROM codes, because we know ZSBL downloads the next stage program into the L2 LIM at address 0x8000000 and executes from there. We can bypass the whole ZSBL execution and use "-bios" to load the next stage program directly if MSEL indicates a ZSBL booting flow. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-16 03:50:39 +03:00
"flash. Otherwise QEMU will jump to DRAM "
"or L2LIM depending on the msel value");
riscv/sifive_u: Add a serial property to the sifive_u machine At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2019-11-16 18:08:50 +03:00
hw/riscv: sifive_u: Add a new property msel for MSEL pin state On SiFive FU540 SoC, the value stored at physical address 0x1000 stores the MSEL pin state that is used to control the next boot location that ROM codes jump to. Add a new property msel to sifive_u machine for this. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-12-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:40 +03:00
s->msel = 0;
object_property_add(obj, "msel", "uint32",
sifive_u_machine_get_uint32_prop,
sifive_u_machine_set_uint32_prop, NULL, &s->msel);
object_property_set_description(obj, "msel",
"Mode Select (MSEL[3:0]) pin state");
riscv/sifive_u: Add a serial property to the sifive_u machine At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2019-11-16 18:08:50 +03:00
s->serial = OTP_SERIAL;
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
object_property_add(obj, "serial", "uint32",
hw/riscv: sifive_u: Rename serial property get/set functions to a generic name In prepration to add more properties to this machine, rename the existing serial property get/set functions to a generic name. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-11-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:39 +03:00
sifive_u_machine_get_uint32_prop,
sifive_u_machine_set_uint32_prop, NULL, &s->serial);
qom: Drop object_property_set_description() parameter @errp object_property_set_description() and object_class_property_set_description() fail only when property @name is not found. There are 85 calls of object_property_set_description() and object_class_property_set_description(). None of them can fail: * 84 immediately follow the creation of the property. * The one in spapr_rng_instance_init() refers to a property created in spapr_rng_class_init(), from spapr_rng_properties[]. Every one of them still gets to decide what to pass for @errp. 51 calls pass &error_abort, 32 calls pass NULL, one receives the error and propagates it to &error_abort, and one propagates it to &error_fatal. I'm actually surprised none of them violates the Error API. What are we gaining by letting callers handle the "property not found" error? Use when the property is not known to exist is simpler: you don't have to guard the call with a check. We haven't found such a use in 5+ years. Until we do, let's make life a bit simpler and drop the @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-8-armbru@redhat.com> [One semantic rebase conflict resolved]
2020-05-05 18:29:15 +03:00
object_property_set_description(obj, "serial", "Board serial number");
riscv/sifive_u: Fix up file ordering Split the file into clear machine and SoC sections. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-03 01:57:22 +03:00
}
static void sifive_u_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "RISC-V Board compatible with SiFive U SDK";
mc->init = sifive_u_machine_init;
mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT;
mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1;
mc->default_cpus = mc->min_cpus;
}
static const TypeInfo sifive_u_machine_typeinfo = {
.name = MACHINE_TYPE_NAME("sifive_u"),
.parent = TYPE_MACHINE,
.class_init = sifive_u_machine_class_init,
.instance_init = sifive_u_machine_instance_init,
.instance_size = sizeof(SiFiveUState),
};
static void sifive_u_machine_init_register_types(void)
{
type_register_static(&sifive_u_machine_typeinfo);
}
type_init(sifive_u_machine_init_register_types)
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
static void sifive_u_soc_instance_init(Object *obj)
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
{
hw/riscv: Replace global smp variables with machine smp properties The global smp variables in riscv are replaced with smp machine properties. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-6-like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [ehabkost: fix spike_board_init()] [ehabkost: fix riscv_sifive_e_soc_init()] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-18 23:54:23 +03:00
MachineState *ms = MACHINE(qdev_get_machine());
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
SiFiveUSoCState *s = RISCV_U_SOC(obj);
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 08:32:25 +03:00
object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus,
TYPE_RISCV_HART_ARRAY);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1);
qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0);
qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU);
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 08:32:25 +03:00
object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus,
TYPE_RISCV_HART_ARRAY);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1);
qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", SIFIVE_U_CPU);
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI);
object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP);
object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM);
hw/riscv: sifive_u: Hook a GPIO controller SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:36 +03:00
object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO);
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
}
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
{
hw/riscv: Replace global smp variables with machine smp properties The global smp variables in riscv are replaced with smp machine properties. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-6-like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [ehabkost: fix spike_board_init()] [ehabkost: fix riscv_sifive_e_soc_init()] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-18 23:54:23 +03:00
MachineState *ms = MACHINE(qdev_get_machine());
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
SiFiveUSoCState *s = RISCV_U_SOC(dev);
const struct MemmapEntry *memmap = sifive_u_memmap;
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
riscv/sifive_u: Add L2-LIM cache memory On reset only a single L2 cache way is enabled, the others are exposed as memory that can be used by early boot firmware. This L2 region is generally disabled using the WayEnable register at a later stage in the boot process. To allow firmware to target QEMU and the HiFive Unleashed let's add the L2 LIM (LooselyIntegrated Memory). Ideally we would want to adjust the size of this chunk of memory as the L2 Cache Controller WayEnable register is incremented. Unfortunately I don't see a nice way to handle reducing or blocking out the L2 LIM while still allowing it be re returned to all enabled from a reset. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:07 +03:00
MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
riscv: sifive_u: Update the plic hart config to support multicore At present the PLIC is instantiated to support only one hart, while the machine allows at most 4 harts to be created. When more than 1 hart is configured, PLIC needs to instantiated to support multicore, otherwise an SMP OS does not work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:25 +03:00
char *plic_hart_config;
size_t plic_hart_config_len;
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
int i;
NICInfo *nd = &nd_table[0];
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort);
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:06 +03:00
/*
* The cluster must be realized after the RISC-V hart array container,
* as the container's CPU object is only created on realize, and the
* CPU must exist and have been parented into the cluster before the
* cluster is realized.
*/
qdev: Convert bus-less devices to qdev_realize() with Coccinelle All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-10 08:32:45 +03:00
qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort);
qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort);
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
/* boot rom */
hw/riscv: Let devices own the MemoryRegion they create Avoid orphan memory regions being added in the /unattached QOM container. This commit was produced with the Coccinelle script scripts/coccinelle/memory-region-housekeeping.cocci. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-22 20:12:57 +03:00
memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom",
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
memmap[SIFIVE_U_MROM].size, &error_fatal);
memory_region_add_subregion(system_memory, memmap[SIFIVE_U_MROM].base,
mask_rom);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
riscv/sifive_u: Add L2-LIM cache memory On reset only a single L2 cache way is enabled, the others are exposed as memory that can be used by early boot firmware. This L2 region is generally disabled using the WayEnable register at a later stage in the boot process. To allow firmware to target QEMU and the HiFive Unleashed let's add the L2 LIM (LooselyIntegrated Memory). Ideally we would want to adjust the size of this chunk of memory as the L2 Cache Controller WayEnable register is incremented. Unfortunately I don't see a nice way to handle reducing or blocking out the L2 LIM while still allowing it be re returned to all enabled from a reset. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-09 02:32:07 +03:00
/*
* Add L2-LIM at reset size.
* This should be reduced in size as the L2 Cache Controller WayEnable
* register is incremented. Unfortunately I don't see a nice (or any) way
* to handle reducing or blocking out the L2 LIM while still allowing it
* be re returned to all enabled after a reset. For the time being, just
* leave it enabled all the time. This won't break anything, but will be
* too generous to misbehaving guests.
*/
memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim",
memmap[SIFIVE_U_L2LIM].size, &error_fatal);
memory_region_add_subregion(system_memory, memmap[SIFIVE_U_L2LIM].base,
l2lim_mem);
riscv: sifive_u: Update the plic hart config to support multicore At present the PLIC is instantiated to support only one hart, while the machine allows at most 4 harts to be created. When more than 1 hart is configured, PLIC needs to instantiated to support multicore, otherwise an SMP OS does not work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:25 +03:00
/* create PLIC hart topology configuration string */
hw/riscv: Replace global smp variables with machine smp properties The global smp variables in riscv are replaced with smp machine properties. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-6-like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [ehabkost: fix spike_board_init()] [ehabkost: fix riscv_sifive_e_soc_init()] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-18 23:54:23 +03:00
plic_hart_config_len = (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1) *
ms->smp.cpus;
riscv: sifive_u: Update the plic hart config to support multicore At present the PLIC is instantiated to support only one hart, while the machine allows at most 4 harts to be created. When more than 1 hart is configured, PLIC needs to instantiated to support multicore, otherwise an SMP OS does not work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:25 +03:00
plic_hart_config = g_malloc0(plic_hart_config_len);
hw/riscv: Replace global smp variables with machine smp properties The global smp variables in riscv are replaced with smp machine properties. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-6-like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [ehabkost: fix spike_board_init()] [ehabkost: fix riscv_sifive_e_soc_init()] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-18 23:54:23 +03:00
for (i = 0; i < ms->smp.cpus; i++) {
riscv: sifive_u: Update the plic hart config to support multicore At present the PLIC is instantiated to support only one hart, while the machine allows at most 4 harts to be created. When more than 1 hart is configured, PLIC needs to instantiated to support multicore, otherwise an SMP OS does not work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:25 +03:00
if (i != 0) {
riscv: sifive_u: Update PLIC hart topology configuration string With heterogeneous harts config, the PLIC hart topology configuration string are "M,MS,.." because of the monitor hart #0. Suggested-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:07 +03:00
strncat(plic_hart_config, "," SIFIVE_U_PLIC_HART_CONFIG,
plic_hart_config_len);
} else {
strncat(plic_hart_config, "M", plic_hart_config_len);
riscv: sifive_u: Update the plic hart config to support multicore At present the PLIC is instantiated to support only one hart, while the machine allows at most 4 harts to be created. When more than 1 hart is configured, PLIC needs to instantiated to support multicore, otherwise an SMP OS does not work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-17 18:51:25 +03:00
}
plic_hart_config_len -= (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1);
}
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
/* MMIO */
s->plic = sifive_plic_create(memmap[SIFIVE_U_PLIC].base,
hw/riscv: Allow creating multiple instances of PLIC We extend PLIC emulation to allow multiple instances of PLIC in a QEMU RISC-V machine. To achieve this, we remove first HART id zero assumption from PLIC emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200616032229.766089-3-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-15 07:55:33 +03:00
plic_hart_config, 0,
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
SIFIVE_U_PLIC_NUM_SOURCES,
SIFIVE_U_PLIC_NUM_PRIORITIES,
SIFIVE_U_PLIC_PRIORITY_BASE,
SIFIVE_U_PLIC_PENDING_BASE,
SIFIVE_U_PLIC_ENABLE_BASE,
SIFIVE_U_PLIC_ENABLE_STRIDE,
SIFIVE_U_PLIC_CONTEXT_BASE,
SIFIVE_U_PLIC_CONTEXT_STRIDE,
memmap[SIFIVE_U_PLIC].size);
riscv/sifive_u: fix a memory leak in soc_realize() Fix a minor memory leak in riscv_sifive_u_soc_realize() Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-12-10 10:14:37 +03:00
g_free(plic_hart_config);
RISC-V: Mark ROM read-only after copying in code The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-03-04 01:52:13 +03:00
sifive_uart_create(system_memory, memmap[SIFIVE_U_UART0].base,
hw/riscv/sifive_plic: Use gpios instead of irqs Instead of creating the interrupt in lines with qemu_allocate_irq() use qdev_init_gpio_in() as this gives us the ability to use the qdev*gpio*() helpers later on. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:54:12 +03:00
serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ));
RISC-V: Enable second UART on sifive_e and sifive_u Previously the second UARTs on the sifive_e and sifive_u machines where disabled due to check-qtest-riscv32 and check-qtest-riscv64 failures. Recent changes in the QEMU core serial code have resolved these failures so the second UARTs can be instantiated. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-14 03:19:03 +03:00
sifive_uart_create(system_memory, memmap[SIFIVE_U_UART1].base,
serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ));
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
sifive_clint_create(memmap[SIFIVE_U_CLINT].base,
hw/riscv: Allow creating multiple instances of CLINT We extend CLINT emulation to allow multiple instances of CLINT in a QEMU RISC-V machine. To achieve this, we remove first HART id zero assumption from CLINT emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-Id: <20200616032229.766089-2-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-14 13:21:31 +03:00
memmap[SIFIVE_U_CLINT].size, 0, ms->smp.cpus,
hw/riscv: Provide rdtime callback for TCG in CLINT emulation This patch extends CLINT emulation to provide rdtime callback for TCG. This rdtime callback will be called wheneven TIME CSRs are read in privileged modes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-02 16:42:17 +03:00
SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, false);
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
riscv/sifive_u: Fix sifive_u_soc_realize() error API violations The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. sifive_u_soc_realize() is wrong that way: it passes &err to sysbus_realize() four times before checking it. Harmless, because the first three can't actually fail (I think). Fix by checking for failure right away. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-18-armbru@redhat.com>
2020-06-30 12:03:42 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) {
return;
}
riscv: sifive_u: Add PRCI block to the SoC Add PRCI mmio base address and size mappings to sifive_u machine, and generate the corresponding device tree node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:10 +03:00
sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_PRCI].base);
hw/riscv: sifive_u: Hook a GPIO controller SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:36 +03:00
qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16);
riscv/sifive_u: Fix sifive_u_soc_realize() error API violations The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. sifive_u_soc_realize() is wrong that way: it passes &err to sysbus_realize() four times before checking it. Harmless, because the first three can't actually fail (I think). Fix by checking for failure right away. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-18-armbru@redhat.com>
2020-06-30 12:03:42 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
return;
}
hw/riscv: sifive_u: Hook a GPIO controller SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:36 +03:00
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_GPIO].base);
/* Pass all GPIOs to the SOC layer so they are available to the board */
qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL);
/* Connect GPIO interrupts to the PLIC */
for (i = 0; i < 16; i++) {
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i,
qdev_get_gpio_in(DEVICE(s->plic),
SIFIVE_U_GPIO_IRQ0 + i));
}
riscv/sifive_u: Add a serial property to the sifive_u SoC At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to the sifive_u SoC to specify the board serial number. When not given, the default serial number 1 is used. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-03 02:08:51 +03:00
qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial);
riscv/sifive_u: Fix sifive_u_soc_realize() error API violations The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. sifive_u_soc_realize() is wrong that way: it passes &err to sysbus_realize() four times before checking it. Harmless, because the first three can't actually fail (I think). Fix by checking for failure right away. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-18-armbru@redhat.com>
2020-06-30 12:03:42 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) {
return;
}
riscv: sifive_u: Instantiate OTP memory with a serial number This adds an OTP memory with a given serial number to the sifive_u machine. With such support, the upstream U-Boot for sifive_fu540 boots out of the box on the sifive_u machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:16 +03:00
sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_OTP].base);
hw: Mark nd_table[] misuse in realize methods FIXME nd_table[] contains NIC configuration for boards to pick up. Device code has no business looking there. Several devices do it anyway. Two of them already have a suitable FIXME comment: "allwinner-a10" and "msf2-soc". Copy it to the others: "allwinner-h3", "xlnx-versal", "xlnx,zynqmp", "sparc32-ledma", "riscv.sifive.u.soc". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200715140440.3540942-3-armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-15 17:04:40 +03:00
/* FIXME use qdev NIC properties instead of nd_table[] */
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
if (nd->used) {
qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
qdev_set_nic_properties(DEVICE(&s->gem), nd);
}
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION,
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) {
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 23:59:08 +03:00
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_GEM].base);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
hw/riscv: sifive_u: Simplify the GEM IRQ connect code a little bit There is no need to retrieve all PLIC IRQ information in order to just connect the GEM IRQ. Use qdev_get_gpio_in() directly like what is done for other peripherals. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-08 17:17:32 +03:00
qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ));
riscv: sifive_u: Fix broken GEM support At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-06 19:20:17 +03:00
create_unimplemented_device("riscv.sifive.u.gem-mgmt",
memmap[SIFIVE_U_GEM_MGMT].base, memmap[SIFIVE_U_GEM_MGMT].size);
hw/riscv: sifive_u: Add a dummy DDR memory controller device It is enough to simply map the SiFive FU540 DDR memory controller into the MMIO space using create_unimplemented_device(), to make the upstream U-Boot v2020.07 DDR memory initialization codes happy. Note we do not generate device tree fragment for the DDR memory controller. Since the controller data in device tree consumes a very large space (see fu540-hifive-unleashed-a00-ddr.dtsi in the U-Boot source), and it is only needed by U-Boot SPL but not any operating system, we choose not to generate the fragment here. This also means when testing with U-Boot SPL, the device tree has to come from U-Boot SPL itself, but not the one generated by QEMU on the fly. The memory has to be set to 8GiB to match the real HiFive Unleashed board when invoking QEMU (-m 8G). With this commit, QEMU can boot U-Boot SPL built for SiFive FU540 all the way up to loading U-Boot proper from MMC: $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800) Trying to boot from MMC1 Unhandled exception: Load access fault EPC: 0000000008009be6 TVAL: 0000000010050014 The above exception is expected because QSPI is unsupported yet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-16 03:50:41 +03:00
create_unimplemented_device("riscv.sifive.u.dmc",
memmap[SIFIVE_U_DMC].base, memmap[SIFIVE_U_DMC].size);
hw/riscv: sifive_u: Add a dummy L2 cache controller device It is enough to simply map the SiFive FU540 L2 cache controller into the MMIO space using create_unimplemented_device(), with an FDT fragment generated, to make the latest upstream U-Boot happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1595227748-24720-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-20 09:49:08 +03:00
create_unimplemented_device("riscv.sifive.u.l2cc",
memmap[SIFIVE_U_L2CC].base, memmap[SIFIVE_U_L2CC].size);
SiFive Freedom U Series RISC-V Machine This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:14 +03:00
}
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
static Property sifive_u_soc_props[] = {
riscv/sifive_u: Add a serial property to the sifive_u SoC At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to the sifive_u SoC to specify the board serial number. When not given, the default serial number 1 is used. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-03 02:08:51 +03:00
DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL),
DEFINE_PROP_END_OF_LIST()
};
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
static void sifive_u_soc_class_init(ObjectClass *oc, void *data)
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
{
DeviceClass *dc = DEVICE_CLASS(oc);
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
device_class_set_props(dc, sifive_u_soc_props);
dc->realize = sifive_u_soc_realize;
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
/* Reason: Uses serial_hds in realize function, thus can't be used twice */
dc->user_creatable = false;
}
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
static const TypeInfo sifive_u_soc_type_info = {
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
.name = TYPE_RISCV_U_SOC,
.parent = TYPE_DEVICE,
.instance_size = sizeof(SiFiveUSoCState),
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
.instance_init = sifive_u_soc_instance_init,
.class_init = sifive_u_soc_class_init,
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
};
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
static void sifive_u_soc_register_types(void)
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
{
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
type_register_static(&sifive_u_soc_type_info);
hw/riscv/sifive_u: Create a SiFive U SoC object Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-04-26 21:15:24 +03:00
}
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-21 17:42:26 +03:00
type_init(sifive_u_soc_register_types)
Reference in New Issue Copy Permalink