qemu/migration/multifd.h

213 lines
6.1 KiB
C
Raw Normal View History

/*
* Multifd common functions
*
* Copyright (c) 2019-2020 Red Hat Inc
*
* Authors:
* Juan Quintela <quintela@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#ifndef QEMU_MIGRATION_MULTIFD_H
#define QEMU_MIGRATION_MULTIFD_H
int multifd_save_setup(Error **errp);
void multifd_save_cleanup(void);
int multifd_load_setup(Error **errp);
void multifd_load_cleanup(void);
migration/multifd: Move load_cleanup inside incoming_state_destroy Currently running migration_incoming_state_destroy() without first running multifd_load_cleanup() will cause a yank error: qemu-system-x86_64: ../util/yank.c:107: yank_unregister_instance: Assertion `QLIST_EMPTY(&entry->yankfns)' failed. (core dumped) The above error happens in the target host, when multifd is being used for precopy, and then postcopy is triggered and the migration finishes. This will crash the VM in the target host. To avoid that, move multifd_load_cleanup() inside migration_incoming_state_destroy(), so that the load cleanup becomes part of the incoming state destroying process. Running multifd_load_cleanup() twice can become an issue, though, but the only scenario it could be ran twice is on process_incoming_migration_bh(). So removing this extra call is necessary. On the other hand, this multifd_load_cleanup() call happens way before the migration_incoming_state_destroy() and having this happening before dirty_bitmap_mig_before_vm_start() and vm_start() may be a need. So introduce a new function multifd_load_shutdown() that will mainly stop all multifd threads and close their QIOChannels. Then use this function instead of multifd_load_cleanup() to make sure nothing else is received before dirty_bitmap_mig_before_vm_start(). Fixes: b5eea99ec2 ("migration: Add yank feature") Reported-by: Li Xiaohui <xiaohli@redhat.com> Signed-off-by: Leonardo Bras <leobras@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-02-10 09:36:31 +03:00
void multifd_load_shutdown(void);
bool multifd_recv_all_channels_created(void);
2022-12-20 21:44:18 +03:00
void multifd_recv_new_channel(QIOChannel *ioc, Error **errp);
void multifd_recv_sync_main(void);
int multifd_send_sync_main(QEMUFile *f);
int multifd_queue_page(QEMUFile *f, RAMBlock *block, ram_addr_t offset);
/* Multifd Compression flags */
#define MULTIFD_FLAG_SYNC (1 << 0)
/* We reserve 3 bits for compression methods */
#define MULTIFD_FLAG_COMPRESSION_MASK (7 << 1)
/* we need to be compatible. Before compression value was 0 */
#define MULTIFD_FLAG_NOCOMP (0 << 1)
#define MULTIFD_FLAG_ZLIB (1 << 1)
#define MULTIFD_FLAG_ZSTD (2 << 1)
/* This value needs to be a multiple of qemu_target_page_size() */
#define MULTIFD_PACKET_SIZE (512 * 1024)
typedef struct {
uint32_t magic;
uint32_t version;
uint32_t flags;
/* maximum number of allocated pages */
uint32_t pages_alloc;
/* non zero pages */
uint32_t normal_pages;
/* size of the next packet that contains pages */
uint32_t next_packet_size;
uint64_t packet_num;
uint64_t unused[4]; /* Reserved for future use */
char ramblock[256];
uint64_t offset[];
} __attribute__((packed)) MultiFDPacket_t;
typedef struct {
/* number of used pages */
uint32_t num;
/* number of allocated pages */
uint32_t allocated;
/* global number of generated multifd packets */
uint64_t packet_num;
/* offset of each page */
ram_addr_t *offset;
RAMBlock *block;
} MultiFDPages_t;
typedef struct {
/* Fields are only written at creating/deletion time */
/* No lock required for them, they are read only */
/* channel number */
uint8_t id;
/* channel thread name */
char *name;
/* channel thread id */
QemuThread thread;
/* communication channel */
QIOChannel *c;
/* is the yank function registered */
bool registered_yank;
/* packet allocated len */
uint32_t packet_len;
/* guest page size */
uint32_t page_size;
/* number of pages in a full packet */
uint32_t page_count;
/* multifd flags for sending ram */
int write_flags;
/* sem where to wait for more work */
QemuSemaphore sem;
/* syncs main thread and channels */
QemuSemaphore sem_sync;
/* this mutex protects the following parameters */
QemuMutex mutex;
/* is this channel thread running */
bool running;
/* should this thread finish */
bool quit;
/* multifd flags for each packet */
uint32_t flags;
/* global number of generated multifd packets */
uint64_t packet_num;
/* thread has work to do */
int pending_job;
/* array of pages to sent.
* The owner of 'pages' depends of 'pending_job' value:
* pending_job == 0 -> migration_thread can use it.
* pending_job != 0 -> multifd_channel can use it.
*/
MultiFDPages_t *pages;
/* thread local variables. No locking required */
/* pointer to the packet */
MultiFDPacket_t *packet;
/* size of the next packet that contains pages */
uint32_t next_packet_size;
/* packets sent through this channel */
uint64_t num_packets;
/* non zero pages sent through this channel */
uint64_t total_normal_pages;
/* buffers to send */
struct iovec *iov;
/* number of iovs used */
uint32_t iovs_num;
/* Pages that are not zero */
ram_addr_t *normal;
/* num of non zero pages */
uint32_t normal_num;
/* used for compression methods */
void *data;
} MultiFDSendParams;
typedef struct {
/* Fields are only written at creating/deletion time */
/* No lock required for them, they are read only */
/* channel number */
uint8_t id;
/* channel thread name */
char *name;
/* channel thread id */
QemuThread thread;
/* communication channel */
QIOChannel *c;
/* packet allocated len */
uint32_t packet_len;
/* guest page size */
uint32_t page_size;
/* number of pages in a full packet */
uint32_t page_count;
/* syncs main thread and channels */
QemuSemaphore sem_sync;
/* this mutex protects the following parameters */
QemuMutex mutex;
/* is this channel thread running */
bool running;
/* should this thread finish */
bool quit;
/* multifd flags for each packet */
uint32_t flags;
/* global number of generated multifd packets */
uint64_t packet_num;
/* thread local variables. No locking required */
/* pointer to the packet */
MultiFDPacket_t *packet;
/* size of the next packet that contains pages */
uint32_t next_packet_size;
/* packets sent through this channel */
uint64_t num_packets;
/* ramblock */
RAMBlock *block;
/* ramblock host address */
uint8_t *host;
/* non zero pages recv through this channel */
uint64_t total_normal_pages;
/* buffers to recv */
struct iovec *iov;
/* Pages that are not zero */
ram_addr_t *normal;
/* num of non zero pages */
uint32_t normal_num;
/* used for de-compression methods */
void *data;
} MultiFDRecvParams;
typedef struct {
/* Setup for sending side */
int (*send_setup)(MultiFDSendParams *p, Error **errp);
/* Cleanup for sending side */
void (*send_cleanup)(MultiFDSendParams *p, Error **errp);
/* Prepare the send packet */
int (*send_prepare)(MultiFDSendParams *p, Error **errp);
/* Setup for receiving side */
int (*recv_setup)(MultiFDRecvParams *p, Error **errp);
/* Cleanup for receiving side */
void (*recv_cleanup)(MultiFDRecvParams *p);
/* Read all pages */
int (*recv_pages)(MultiFDRecvParams *p, Error **errp);
} MultiFDMethods;
void multifd_register_ops(int method, MultiFDMethods *ops);
#endif