mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
31f137e3d6
qemu/hw/virtio/Kconfig

99 lines
1.5 KiB
Plaintext
Raw Normal View History

kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config VIRTIO
bool
config VIRTIO_RNG
bool
virtio: express virtio dependencies with Kconfig Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:15 +03:00
default y
depends on VIRTIO
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
virtio-iommu: Add skeleton This patchs adds the skeleton for the virtio-iommu device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200214132745.23392-2-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-14 16:27:36 +03:00
config VIRTIO_IOMMU
bool
default y
virtio-iommu: depend on PCI The virtio-iommu device attaches itself to a PCI bus, so it makes no sense to include it unless PCI is supported---and in fact compilation fails without this change. Reported-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-20 13:41:24 +03:00
depends on PCI && VIRTIO
virtio-iommu: Add skeleton This patchs adds the skeleton for the virtio-iommu device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200214132745.23392-2-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-14 16:27:36 +03:00
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config VIRTIO_PCI
bool
build: convert pci.mak to Kconfig Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:04 +03:00
default y if PCI_DEVICES
depends on PCI
select VIRTIO
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config VIRTIO_MMIO
bool
virtio: express virtio dependencies with Kconfig Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:15 +03:00
select VIRTIO
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
s390x: express dependencies with Kconfig Instead of hard-coding all config switches in the config file default-configs/s390x-softmmu.mak, let's use the new Kconfig files to express the necessary dependencies: The S390_CCW_VIRTIO config switch for the "s390-ccw-virtio" machine now selects all non-optional devices. And since we already have the VIRTIO_PCI and VIRTIO_MMIO config switches for the other two virtio transports, this patch also introduces a new config switch VIRTIO_CCW for the third, s390x-specific virtio transport, so that all three virtio transports are now handled in the same way. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-29 12:42:14 +03:00
config VIRTIO_CCW
bool
select VIRTIO
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config VIRTIO_BALLOON
bool
virtio: express virtio dependencies with Kconfig Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:15 +03:00
default y
depends on VIRTIO
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config VIRTIO_CRYPTO
bool
virtio: express virtio dependencies with Kconfig Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:15 +03:00
default y
depends on VIRTIO
virtio-pmem: add virtio device This is the implementation of virtio-pmem device. Support will require machine changes for the architectures that will support it, so it will not yet be compiled. It can be unlocked with VIRTIO_PMEM_SUPPORTED per machine and disabled globally via VIRTIO_PMEM. We cannot use the "addr" property as that is already used e.g. for virtio-pci/pci devices. And we will have e.g. virtio-pmem-pci as a proxy. So we have to choose a different one (unfortunately). "memaddr" it is. That name should ideally be used by all other virtio-* based memory devices in the future. -device virtio-pmem-pci,id=p0,bus=bux0,addr=0x01,memaddr=0x1000000... Acked-by: Markus Armbruster <armbru@redhat.com> [ QAPI bits ] Signed-off-by: Pankaj Gupta <pagupta@redhat.com> [ MemoryDevice/MemoryRegion changes, cleanups, addr property "memaddr", split up patches, unplug handler ] Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190619094907.10131-2-pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-06-19 12:49:01 +03:00
config VIRTIO_PMEM_SUPPORTED
bool
config VIRTIO_PMEM
bool
default y
depends on VIRTIO
depends on VIRTIO_PMEM_SUPPORTED
select MEM_DEVICE
virtio-mem: Paravirtualized memory hot(un)plug This is the very basic/initial version of virtio-mem. An introduction to virtio-mem can be found in the Linux kernel driver [1]. While it can be used in the current state for hotplug of a smaller amount of memory, it will heavily benefit from resizeable memory regions in the future. Each virtio-mem device manages a memory region (provided via a memory backend). After requested by the hypervisor ("requested-size"), the guest can try to plug/unplug blocks of memory within that region, in order to reach the requested size. Initially, and after a reboot, all memory is unplugged (except in special cases - reboot during postcopy). The guest may only try to plug/unplug blocks of memory within the usable region size. The usable region size is a little bigger than the requested size, to give the device driver some flexibility. The usable region size will only grow, except on reboots or when all memory is requested to get unplugged. The guest can never plug more memory than requested. Unplugged memory will get zapped/discarded, similar to in a balloon device. The block size is variable, however, it is always chosen in a way such that THP splits are avoided (e.g., 2MB). The state of each block (plugged/unplugged) is tracked in a bitmap. As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now expose "VirtioMEMDeviceInfo" via "query-memory-devices". -------------------------------------------------------------------------- There are two important follow-up items that are in the works: 1. Resizeable memory regions: Use resizeable allocations/RAM blocks to grow/shrink along with the usable region size. This avoids creating initially very big VMAs, RAM blocks, and KVM slots. 2. Protection of unplugged memory: Make sure the gust cannot actually make use of unplugged memory. Other follow-up items that are in the works: 1. Exclude unplugged memory during migration (via precopy notifier). 2. Handle remapping of memory. 3. Support for other architectures. -------------------------------------------------------------------------- Example usage (virtio-mem-pci is introduced in follow-up patches): Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G Query the configuration: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 0 size: 0 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 0: (qemu) qom-set vm0 requested-size 500M Remove some memory from node 1: (qemu) qom-set vm1 requested-size 200M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 524288000 size: 524288000 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 209715200 size: 209715200 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-11-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26 10:22:37 +03:00
config VIRTIO_MEM_SUPPORTED
bool
config VIRTIO_MEM
bool
default y
depends on VIRTIO
depends on LINUX
depends on VIRTIO_MEM_SUPPORTED
select MEM_DEVICE
hw/virtio: add boilerplate for vhost-user-i2c device This creates the QEMU side of the vhost-user-i2c device which connects to the remote daemon. It is based of vhost-user-fs code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Message-Id: <e80591b52fea4b51631818bb92a798a3daf90399.1625806763.git.viresh.kumar@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-09 08:00:16 +03:00
hw/virtio: Introduce VHOST_VSOCK_COMMON symbol in Kconfig Instead of adding 'vhost-vsock-common.c' twice (for VHOST_VSOCK and VHOST_USER_VSOCK), have it depend on VHOST_VSOCK_COMMON, selected by both symbols. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230524093744.88442-6-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2023-05-24 12:37:39 +03:00
config VHOST_VSOCK_COMMON
bool
depends on VIRTIO
build: move vhost-vsock configuration to Kconfig vhost-vsock and vhost-user-vsock are two devices of their own; it should be possible to enable/disable them with --without-default-devices, not --without-default-features. Compute their default value in Kconfig to obtain the more intuitive behavior. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20 18:34:02 +03:00
config VHOST_VSOCK
bool
default y
hw/virtio: Introduce VHOST_VSOCK_COMMON symbol in Kconfig Instead of adding 'vhost-vsock-common.c' twice (for VHOST_VSOCK and VHOST_USER_VSOCK), have it depend on VHOST_VSOCK_COMMON, selected by both symbols. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230524093744.88442-6-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2023-05-24 12:37:39 +03:00
select VHOST_VSOCK_COMMON
build: move vhost-vsock configuration to Kconfig vhost-vsock and vhost-user-vsock are two devices of their own; it should be possible to enable/disable them with --without-default-devices, not --without-default-features. Compute their default value in Kconfig to obtain the more intuitive behavior. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20 18:34:02 +03:00
depends on VIRTIO && VHOST_KERNEL
config VHOST_USER_VSOCK
bool
default y
hw/virtio: Introduce VHOST_VSOCK_COMMON symbol in Kconfig Instead of adding 'vhost-vsock-common.c' twice (for VHOST_VSOCK and VHOST_USER_VSOCK), have it depend on VHOST_VSOCK_COMMON, selected by both symbols. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230524093744.88442-6-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2023-05-24 12:37:39 +03:00
select VHOST_VSOCK_COMMON
build: move vhost-vsock configuration to Kconfig vhost-vsock and vhost-user-vsock are two devices of their own; it should be possible to enable/disable them with --without-default-devices, not --without-default-features. Compute their default value in Kconfig to obtain the more intuitive behavior. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20 18:34:02 +03:00
depends on VIRTIO && VHOST_USER
hw/virtio: add boilerplate for vhost-user-i2c device This creates the QEMU side of the vhost-user-i2c device which connects to the remote daemon. It is based of vhost-user-fs code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Message-Id: <e80591b52fea4b51631818bb92a798a3daf90399.1625806763.git.viresh.kumar@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-09 08:00:16 +03:00
config VHOST_USER_I2C
bool
default y
depends on VIRTIO && VHOST_USER
vhost-user-rng: Add vhost-user-rng implementation Introduce a random number generator (RNG) backend that communicates with a vhost-user server to retrieve entropy. That way other VMM that comply with the vhost user protocl can use the same vhost-user daemon without having to write yet another RNG driver. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Message-Id: <20211012205904.4106769-2-mathieu.poirier@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-12 23:59:02 +03:00
config VHOST_USER_RNG
bool
default y
depends on VIRTIO && VHOST_USER
build: move vhost-user-fs configuration to Kconfig vhost-user-fs is a device and it should be possible to enable/disable it with --without-default-devices, not --without-default-features. Compute its default value in Kconfig to obtain the more intuitive behavior. In this case the configure options were undocumented, too. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20 18:34:04 +03:00
config VHOST_USER_FS
bool
default y
depends on VIRTIO && VHOST_USER
hw/virtio: add boilerplate for vhost-user-gpio device This creates the QEMU side of the vhost-user-gpio device which connects to the remote daemon. It is based of vhost-user-i2c code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <5390324a748194a21bc99b1538e19761a8c64092.1641987128.git.viresh.kumar@linaro.org> [AJB: fixes for qtest, tweaks to feature bits] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Message-Id: <20220802095010.3330793-13-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-02 12:50:00 +03:00
config VHOST_USER_GPIO
bool
default y
depends on VIRTIO && VHOST_USER
vdpa: add vdpa-dev support Supports vdpa-dev, we can use the deivce directly: -M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \ vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Message-Id: <20221215134944.2809-3-longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-15 16:49:41 +03:00
config VHOST_VDPA_DEV
bool
default y
depends on VIRTIO && VHOST_VDPA && LINUX
Reference in New Issue Copy Permalink