qemu/hw/ppc/spapr_rtas.c

664 lines
21 KiB
C
Raw Normal View History

/*
* QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
*
* Hypercall based emulated RTAS
*
* Copyright (c) 2010-2011 David Gibson, IBM Corporation.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
#include "sysemu/sysemu.h"
#include "sysemu/device_tree.h"
#include "sysemu/cpus.h"
#include "sysemu/hw_accel.h"
#include "sysemu/runstate.h"
#include "sysemu/qtest.h"
#include "kvm_ppc.h"
#include "hw/ppc/spapr.h"
#include "hw/ppc/spapr_vio.h"
#include "hw/ppc/spapr_cpu_core.h"
#include "hw/ppc/ppc.h"
#include <libfdt.h>
#include "hw/ppc/spapr_drc.h"
#include "qemu/cutils.h"
#include "trace.h"
#include "hw/ppc/fdt.h"
#include "target/ppc/mmu-hash64.h"
#include "target/ppc/mmu-book3s-v3.h"
#include "migration/blocker.h"
#include "helper_regs.h"
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void rtas_display_character(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
uint8_t c = rtas_ld(args, 0);
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprVioDevice *sdev = vty_lookup(spapr, 0);
if (!sdev) {
rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
} else {
vty_putchars(sdev, &c, sizeof(c));
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void rtas_power_off(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs, target_ulong args,
uint32_t nret, target_ulong rets)
{
if (nargs != 2 || nret != 1) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
cpu_stop_current();
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void rtas_system_reboot(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
if (nargs != 0 || nret != 1) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
static void rtas_query_cpu_stopped_state(PowerPCCPU *cpu_,
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
target_ulong id;
PowerPCCPU *cpu;
if (nargs != 1 || nret != 2) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
id = rtas_ld(args, 0);
cpu = spapr_find_cpu(id);
if (cpu != NULL) {
if (CPU(cpu)->halted) {
rtas_st(rets, 1, 0);
} else {
rtas_st(rets, 1, 2);
}
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
return;
}
/* Didn't find a matching cpu */
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void rtas_start_cpu(PowerPCCPU *callcpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
target_ulong id, start, r3;
PowerPCCPU *newcpu;
CPUPPCState *env;
target_ulong lpcr;
target_ulong caller_lpcr;
if (nargs != 3 || nret != 1) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
id = rtas_ld(args, 0);
start = rtas_ld(args, 1);
r3 = rtas_ld(args, 2);
newcpu = spapr_find_cpu(id);
if (!newcpu) {
/* Didn't find a matching cpu */
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
env = &newcpu->env;
if (!CPU(newcpu)->halted) {
rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
return;
}
pseries: Fix and cleanup CPU initialization and reset The current pseries machine init function iterates over the CPUs at several points, doing various bits of initialization. This is messy; these can and should be merged into a single iteration doing all the necessary per cpu initialization. Worse, some of these initializations were setting up state which should be set on every reset, not just at machine init time. A few of the initializations simply weren't necessary at all. This patch, therefore, moves those things that need to be to the per-cpu reset handler, and combines the remainder into two loops over the cpus (which also creates them). The second loop is for setting up hash table information, and will be removed in a subsequent patch also making other fixes to the hash table setup. This exposes a bug in our start-cpu RTAS routine (called by the guest to start up CPUs other than CPU0) under kvm. Previously, this function did not make a call to ensure that it's changes to the new cpu's state were pushed into KVM in-kernel state. We sort-of got away with this because some of the initializations had already placed the secondary CPUs into the right starting state for the sorts of Linux guests we've been running. Nonetheless the start-cpu RTAS call's behaviour was not correct and could easily have been broken by guest changes. This patch also fixes it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:10 +04:00
cpu_synchronize_state(CPU(newcpu));
env->msr = (1ULL << MSR_SF) | (1ULL << MSR_ME);
hreg_compute_hflags(env);
caller_lpcr = callcpu->env.spr[SPR_LPCR];
lpcr = env->spr[SPR_LPCR];
/* Set ILE the same way */
lpcr = (lpcr & ~LPCR_ILE) | (caller_lpcr & LPCR_ILE);
/* Set AIL the same way */
lpcr = (lpcr & ~LPCR_AIL) | (caller_lpcr & LPCR_AIL);
if (env->mmu_model == POWERPC_MMU_3_00) {
/*
* New cpus are expected to start in the same radix/hash mode
* as the existing CPUs
*/
if (ppc64_v3_radix(callcpu)) {
lpcr |= LPCR_UPRT | LPCR_GTSE | LPCR_HR;
} else {
lpcr &= ~(LPCR_UPRT | LPCR_GTSE | LPCR_HR);
}
target/ppc: Set PSSCR_EC on cpu halt to prevent spurious wakeup The processor stop status and control register (PSSCR) is used to control the power saving facilities of the thread. The exit criterion bit (EC) is used to specify whether the thread should be woken by any interrupt (EC == 0) or only an interrupt enabled in the LPCR to wake the thread (EC == 1). The rtas facilities start-cpu and self-stop are used to transition a vcpu between the stopped and running states. When a vcpu is stopped it may only be started again by the start-cpu rtas call. Currently a vcpu in the stopped state will start again whenever an interrupt comes along due to PSSCR_EC being cleared, and while this is architecturally correct for a hardware thread, a vcpu is expected to only be woken by calling start-cpu. This means when performing a reboot on a tcg machine that the secondary threads will restart while the primary is still in slof, this is unsupported and causes call traces like: SLOF ********************************************************************** QEMU Starting Build Date = Jan 14 2019 18:00:39 FW Version = git-a5b428e1c1eae703 Press "s" to enter Open Firmware. qemu: fatal: Trying to deliver HV exception (MSR) 70 with no HV support NIP 6d61676963313230 LR 000000003dbe0308 CTR 6d61676963313233 XER 0000000000000000 CPU#1 MSR 0000000000000000 HID0 0000000000000000 HF 0000000000000000 iidx 3 didx 3 TB 00000026 115746031956 DECR 18446744073326238463 GPR00 000000003dbe0308 000000003e669fe0 000000003dc10700 0000000000000003 GPR04 000000003dc62198 000000003dc62178 000000003dc0ea48 0000000000000030 GPR08 000000003dc621a8 0000000000000018 000000003e466008 000000003dc50700 GPR12 c00000000093a4e0 c00000003ffff300 c00000003e533f90 0000000000000000 GPR16 0000000000000000 0000000000000000 000000003e466010 000000003dc0b040 GPR20 0000000000008000 000000000000f003 0000000000000006 000000003e66a050 GPR24 000000003dc06400 000000003dc0ae70 0000000000000003 000000000000f001 GPR28 000000003e66a060 ffffffffffffffff 6d61676963313233 0000000000000028 CR 28000222 [ E L - - - E E E ] RES ffffffffffffffff FPR00 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR08 0000000000000000 0000000000000000 0000000000000000 00000000311825e0 FPR12 00000000311825e0 0000000000000000 0000000000000000 0000000000000000 FPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPSCR 0000000000000000 SRR0 000000003dbe06b0 SRR1 0000000000080000 PVR 00000000004e1200 VRSAVE 0000000000000000 SPRG0 000000003dbe0308 SPRG1 000000003e669fe0 SPRG2 00000000000000d8 SPRG3 000000003dbe0308 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 6d61676963313230 HSRR1 0000000000000000 CFAR 000000003dbe3e64 LPCR 0000000004020008 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000 Aborted (core dumped) To fix this, set the PSSCR_EC bit when a vcpu is stopped to disable it from coming back online until the start-cpu rtas call is made. Fixes: 21c0d66a9c99 ("target/ppc: Fix support for "STOP light" states on POWER9") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190516005744.24366-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-16 03:57:44 +03:00
env->spr[SPR_PSSCR] &= ~PSSCR_EC;
}
ppc_store_lpcr(newcpu, lpcr);
/*
* Set the timebase offset of the new CPU to that of the invoking
* CPU. This helps hotplugged CPU to have the correct timebase
* offset.
*/
newcpu->env.tb_env->tb_offset = callcpu->env.tb_env->tb_offset;
spapr_cpu_set_entry_state(newcpu, start, 0, r3, 0);
qemu_cpu_kick(CPU(newcpu));
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void rtas_stop_self(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
/* Disable Power-saving mode Exit Cause exceptions for the CPU.
* This could deliver an interrupt on a dying CPU and crash the
target/ppc: Set PSSCR_EC on cpu halt to prevent spurious wakeup The processor stop status and control register (PSSCR) is used to control the power saving facilities of the thread. The exit criterion bit (EC) is used to specify whether the thread should be woken by any interrupt (EC == 0) or only an interrupt enabled in the LPCR to wake the thread (EC == 1). The rtas facilities start-cpu and self-stop are used to transition a vcpu between the stopped and running states. When a vcpu is stopped it may only be started again by the start-cpu rtas call. Currently a vcpu in the stopped state will start again whenever an interrupt comes along due to PSSCR_EC being cleared, and while this is architecturally correct for a hardware thread, a vcpu is expected to only be woken by calling start-cpu. This means when performing a reboot on a tcg machine that the secondary threads will restart while the primary is still in slof, this is unsupported and causes call traces like: SLOF ********************************************************************** QEMU Starting Build Date = Jan 14 2019 18:00:39 FW Version = git-a5b428e1c1eae703 Press "s" to enter Open Firmware. qemu: fatal: Trying to deliver HV exception (MSR) 70 with no HV support NIP 6d61676963313230 LR 000000003dbe0308 CTR 6d61676963313233 XER 0000000000000000 CPU#1 MSR 0000000000000000 HID0 0000000000000000 HF 0000000000000000 iidx 3 didx 3 TB 00000026 115746031956 DECR 18446744073326238463 GPR00 000000003dbe0308 000000003e669fe0 000000003dc10700 0000000000000003 GPR04 000000003dc62198 000000003dc62178 000000003dc0ea48 0000000000000030 GPR08 000000003dc621a8 0000000000000018 000000003e466008 000000003dc50700 GPR12 c00000000093a4e0 c00000003ffff300 c00000003e533f90 0000000000000000 GPR16 0000000000000000 0000000000000000 000000003e466010 000000003dc0b040 GPR20 0000000000008000 000000000000f003 0000000000000006 000000003e66a050 GPR24 000000003dc06400 000000003dc0ae70 0000000000000003 000000000000f001 GPR28 000000003e66a060 ffffffffffffffff 6d61676963313233 0000000000000028 CR 28000222 [ E L - - - E E E ] RES ffffffffffffffff FPR00 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR08 0000000000000000 0000000000000000 0000000000000000 00000000311825e0 FPR12 00000000311825e0 0000000000000000 0000000000000000 0000000000000000 FPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPSCR 0000000000000000 SRR0 000000003dbe06b0 SRR1 0000000000080000 PVR 00000000004e1200 VRSAVE 0000000000000000 SPRG0 000000003dbe0308 SPRG1 000000003e669fe0 SPRG2 00000000000000d8 SPRG3 000000003dbe0308 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 6d61676963313230 HSRR1 0000000000000000 CFAR 000000003dbe3e64 LPCR 0000000004020008 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000 Aborted (core dumped) To fix this, set the PSSCR_EC bit when a vcpu is stopped to disable it from coming back online until the start-cpu rtas call is made. Fixes: 21c0d66a9c99 ("target/ppc: Fix support for "STOP light" states on POWER9") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190516005744.24366-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-16 03:57:44 +03:00
* guest.
* For the same reason, set PSSCR_EC.
*/
env->spr[SPR_PSSCR] |= PSSCR_EC;
cs->halted = 1;
ppc_store_lpcr(cpu, env->spr[SPR_LPCR] & ~pcc->lpcr_pm);
kvmppc_set_reg_ppc_online(cpu, 0);
qemu_cpu_kick(cs);
}
static void rtas_ibm_suspend_me(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
CPUState *cs;
if (nargs != 0 || nret != 1) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
CPU_FOREACH(cs) {
PowerPCCPU *c = POWERPC_CPU(cs);
CPUPPCState *e = &c->env;
if (c == cpu) {
continue;
}
/* See h_join */
if (!cs->halted || (e->msr & (1ULL << MSR_EE))) {
rtas_st(rets, 0, H_MULTI_THREADS_ACTIVE);
return;
}
}
qemu_system_suspend_request();
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
static inline int sysparm_st(target_ulong addr, target_ulong len,
const void *val, uint16_t vallen)
{
hwaddr phys = ppc64_phys_to_real(addr);
if (len < 2) {
return RTAS_OUT_SYSPARM_PARAM_ERROR;
}
stw_be_phys(&address_space_memory, phys, vallen);
cpu_physical_memory_write(phys + 2, val, MIN(len - 2, vallen));
return RTAS_OUT_SUCCESS;
}
static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu,
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
MachineState *ms = MACHINE(spapr);
target_ulong parameter = rtas_ld(args, 0);
target_ulong buffer = rtas_ld(args, 1);
target_ulong length = rtas_ld(args, 2);
target_ulong ret;
switch (parameter) {
case RTAS_SYSPARM_SPLPAR_CHARACTERISTICS: {
g_autofree char *param_val = g_strdup_printf("MaxEntCap=%d,"
"DesMem=%" PRIu64 ","
"DesProcs=%d,"
"MaxPlatProcs=%d",
ms->smp.max_cpus,
ms->ram_size / MiB,
ms->smp.cpus,
ms->smp.max_cpus);
if (pcc->n_host_threads > 0) {
/*
* Add HostThrs property. This property is not present in PAPR but
* is expected by some guests to communicate the number of physical
* host threads per core on the system so that they can scale
* information which varies based on the thread configuration.
*/
g_autofree char *hostthr_val = g_strdup_printf(",HostThrs=%d",
pcc->n_host_threads);
char *old = param_val;
param_val = g_strconcat(param_val, hostthr_val, NULL);
g_free(old);
}
ret = sysparm_st(buffer, length, param_val, strlen(param_val) + 1);
break;
}
case RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE: {
uint8_t param_val = DIAGNOSTICS_RUN_MODE_DISABLED;
ret = sysparm_st(buffer, length, &param_val, sizeof(param_val));
break;
}
case RTAS_SYSPARM_UUID:
ret = sysparm_st(buffer, length, (unsigned char *)&qemu_uuid,
(qemu_uuid_set ? 16 : 0));
break;
default:
ret = RTAS_OUT_NOT_SUPPORTED;
}
rtas_st(rets, 0, ret);
}
static void rtas_ibm_set_system_parameter(PowerPCCPU *cpu,
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
target_ulong parameter = rtas_ld(args, 0);
target_ulong ret = RTAS_OUT_NOT_SUPPORTED;
switch (parameter) {
case RTAS_SYSPARM_SPLPAR_CHARACTERISTICS:
case RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE:
case RTAS_SYSPARM_UUID:
ret = RTAS_OUT_NOT_AUTHORIZED;
break;
}
rtas_st(rets, 0, ret);
}
static void rtas_ibm_os_term(PowerPCCPU *cpu,
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
target_ulong msgaddr = rtas_ld(args, 0);
char msg[512];
cpu_physical_memory_read(msgaddr, msg, sizeof(msg) - 1);
msg[sizeof(msg) - 1] = 0;
error_report("OS terminated: %s", msg);
qemu_system_guest_panicked(NULL);
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void rtas_set_power_level(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args, uint32_t nret,
target_ulong rets)
{
int32_t power_domain;
if (nargs != 2 || nret != 2) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
/* we currently only use a single, "live insert" powerdomain for
* hotplugged/dlpar'd resources, so the power is always live/full (100)
*/
power_domain = rtas_ld(args, 0);
if (power_domain != -1) {
rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
return;
}
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
rtas_st(rets, 1, 100);
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void rtas_get_power_level(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args, uint32_t nret,
target_ulong rets)
{
int32_t power_domain;
if (nargs != 1 || nret != 2) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
/* we currently only use a single, "live insert" powerdomain for
* hotplugged/dlpar'd resources, so the power is always live/full (100)
*/
power_domain = rtas_ld(args, 0);
if (power_domain != -1) {
rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
return;
}
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
rtas_st(rets, 1, 100);
}
static void rtas_ibm_nmi_register(PowerPCCPU *cpu,
SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
hwaddr rtas_addr;
target_ulong sreset_addr, mce_addr;
if (spapr_get_cap(spapr, SPAPR_CAP_FWNMI) == SPAPR_CAP_OFF) {
rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
return;
}
rtas_addr = spapr_get_rtas_addr();
if (!rtas_addr) {
rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
return;
}
sreset_addr = rtas_ld(args, 0);
mce_addr = rtas_ld(args, 1);
/* PAPR requires these are in the first 32M of memory and within RMA */
if (sreset_addr >= 32 * MiB || sreset_addr >= spapr->rma_size ||
mce_addr >= 32 * MiB || mce_addr >= spapr->rma_size) {
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
if (kvm_enabled()) {
pseries: fix kvmppc_set_fwnmi() QEMU issues the ioctl(KVM_CAP_PPC_FWNMI) on the first vCPU. If the first vCPU is currently running, the vCPU mutex is held and the ioctl() cannot be done and waits until the mutex is released. This never happens and the VM is stuck. To avoid this deadlock, issue the ioctl on the same vCPU doing the RTAS call. The problem can be reproduced by booting a guest with several vCPUs (the probability to have the problem is (n - 1) / n, n = # of CPUs), and then by triggering a kernel crash with "echo c >/proc/sysrq-trigger". On the reboot, the kernel hangs after: ... [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x48000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0001c06f8f4f91a7 [ 0.000000] possible = 0x0003fbffcf5fb1a7 [ 0.000000] always = 0x00000003800081a1 [ 0.000000] cpu_user_features = 0xdc0065c2 0xaee00000 [ 0.000000] mmu_features = 0x3c006041 [ 0.000000] firmware_features = 0x00000085455a445f [ 0.000000] physical_start = 0x8000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] numa: NODE_DATA [mem 0x47f33c80-0x47f3ffff] Fixes: ec010c00665b ("ppc/spapr: KVM FWNMI should not be enabled until guest requests it") Cc: npiggin@gmail.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200724083533.281700-1-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-07-24 11:35:33 +03:00
if (kvmppc_set_fwnmi(cpu) < 0) {
rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
return;
}
}
spapr->fwnmi_system_reset_addr = sreset_addr;
spapr->fwnmi_machine_check_addr = mce_addr;
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
}
static void rtas_ibm_nmi_interlock(PowerPCCPU *cpu,
SpaprMachineState *spapr,
uint32_t token, uint32_t nargs,
target_ulong args,
uint32_t nret, target_ulong rets)
{
if (spapr_get_cap(spapr, SPAPR_CAP_FWNMI) == SPAPR_CAP_OFF) {
rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
return;
}
if (spapr->fwnmi_machine_check_addr == -1) {
qemu_log_mask(LOG_GUEST_ERROR,
"FWNMI: ibm,nmi-interlock RTAS called with FWNMI not registered.\n");
/* NMI register not called */
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return;
}
if (spapr->fwnmi_machine_check_interlock != cpu->vcpu_id) {
/*
* The vCPU that hit the NMI should invoke "ibm,nmi-interlock"
* This should be PARAM_ERROR, but Linux calls "ibm,nmi-interlock"
* for system reset interrupts, despite them not being interlocked.
* PowerVM silently ignores this and returns success here. Returning
* failure causes Linux to print the error "FWNMI: nmi-interlock
* failed: -3", although no other apparent ill effects, this is a
* regression for the user when enabling FWNMI. So for now, match
* PowerVM. When most Linux clients are fixed, this could be
* changed.
*/
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
return;
}
/*
* vCPU issuing "ibm,nmi-interlock" is done with NMI handling,
* hence unset fwnmi_machine_check_interlock.
*/
spapr->fwnmi_machine_check_interlock = -1;
qemu_cond_signal(&spapr->fwnmi_machine_check_interlock_cond);
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
migrate_del_blocker(&spapr->fwnmi_migration_blocker);
}
static struct rtas_call {
const char *name;
spapr_rtas_fn fn;
} rtas_table[RTAS_TOKEN_MAX - RTAS_TOKEN_BASE];
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
target_ulong spapr_rtas_call(PowerPCCPU *cpu, SpaprMachineState *spapr,
uint32_t token, uint32_t nargs, target_ulong args,
uint32_t nret, target_ulong rets)
{
if ((token >= RTAS_TOKEN_BASE) && (token < RTAS_TOKEN_MAX)) {
struct rtas_call *call = rtas_table + (token - RTAS_TOKEN_BASE);
if (call->fn) {
call->fn(cpu, spapr, token, nargs, args, nret, rets);
return H_SUCCESS;
}
}
/* HACK: Some Linux early debug code uses RTAS display-character,
* but assumes the token value is 0xa (which it is on some real
* machines) without looking it up in the device tree. This
* special case makes this work */
if (token == 0xa) {
rtas_display_character(cpu, spapr, 0xa, nargs, args, nret, rets);
return H_SUCCESS;
}
hcall_dprintf("Unknown RTAS token 0x%x\n", token);
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
return H_PARAMETER;
}
static uint64_t qtest_rtas_call(char *cmd, uint32_t nargs, uint64_t args,
uint32_t nret, uint64_t rets)
{
int token;
for (token = 0; token < RTAS_TOKEN_MAX - RTAS_TOKEN_BASE; token++) {
if (strcmp(cmd, rtas_table[token].name) == 0) {
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
PowerPCCPU *cpu = POWERPC_CPU(first_cpu);
rtas_table[token].fn(cpu, spapr, token + RTAS_TOKEN_BASE,
nargs, args, nret, rets);
return H_SUCCESS;
}
}
return H_PARAMETER;
}
static bool spapr_qtest_callback(CharBackend *chr, gchar **words)
{
if (strcmp(words[0], "rtas") == 0) {
uint64_t res, args, ret;
unsigned long nargs, nret;
int rc;
rc = qemu_strtoul(words[2], NULL, 0, &nargs);
g_assert(rc == 0);
rc = qemu_strtou64(words[3], NULL, 0, &args);
g_assert(rc == 0);
rc = qemu_strtoul(words[4], NULL, 0, &nret);
g_assert(rc == 0);
rc = qemu_strtou64(words[5], NULL, 0, &ret);
g_assert(rc == 0);
res = qtest_rtas_call(words[1], nargs, args, nret, ret);
qtest_send_prefix(chr);
qtest_sendf(chr, "OK %"PRIu64"\n", res);
return true;
}
return false;
}
void spapr_rtas_register(int token, const char *name, spapr_rtas_fn fn)
{
assert((token >= RTAS_TOKEN_BASE) && (token < RTAS_TOKEN_MAX));
token -= RTAS_TOKEN_BASE;
assert(!name || !rtas_table[token].name);
rtas_table[token].name = name;
rtas_table[token].fn = fn;
}
void spapr_dt_rtas_tokens(void *fdt, int rtas)
{
int i;
for (i = 0; i < RTAS_TOKEN_MAX - RTAS_TOKEN_BASE; i++) {
struct rtas_call *call = &rtas_table[i];
if (!call->name) {
continue;
}
_FDT(fdt_setprop_cell(fdt, rtas, call->name, i + RTAS_TOKEN_BASE));
}
}
hwaddr spapr_get_rtas_addr(void)
{
SpaprMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
int rtas_node;
const fdt32_t *rtas_data;
void *fdt = spapr->fdt_blob;
/* fetch rtas addr from fdt */
rtas_node = fdt_path_offset(fdt, "/rtas");
if (rtas_node < 0) {
return 0;
}
rtas_data = fdt_getprop(fdt, rtas_node, "linux,rtas-base", NULL);
if (!rtas_data) {
return 0;
}
/*
* We assume that the OS called RTAS instantiate-rtas, but some other
* OS might call RTAS instantiate-rtas-64 instead. This fine as of now
* as SLOF only supports 32-bit variant.
*/
return (hwaddr)fdt32_to_cpu(*rtas_data);
}
static void core_rtas_register_types(void)
{
spapr_rtas_register(RTAS_DISPLAY_CHARACTER, "display-character",
rtas_display_character);
spapr_rtas_register(RTAS_POWER_OFF, "power-off", rtas_power_off);
spapr_rtas_register(RTAS_SYSTEM_REBOOT, "system-reboot",
rtas_system_reboot);
spapr_rtas_register(RTAS_QUERY_CPU_STOPPED_STATE, "query-cpu-stopped-state",
rtas_query_cpu_stopped_state);
spapr_rtas_register(RTAS_START_CPU, "start-cpu", rtas_start_cpu);
spapr_rtas_register(RTAS_STOP_SELF, "stop-self", rtas_stop_self);
spapr_rtas_register(RTAS_IBM_SUSPEND_ME, "ibm,suspend-me",
rtas_ibm_suspend_me);
spapr_rtas_register(RTAS_IBM_GET_SYSTEM_PARAMETER,
"ibm,get-system-parameter",
rtas_ibm_get_system_parameter);
spapr_rtas_register(RTAS_IBM_SET_SYSTEM_PARAMETER,
"ibm,set-system-parameter",
rtas_ibm_set_system_parameter);
spapr_rtas_register(RTAS_IBM_OS_TERM, "ibm,os-term",
rtas_ibm_os_term);
spapr_rtas_register(RTAS_SET_POWER_LEVEL, "set-power-level",
rtas_set_power_level);
spapr_rtas_register(RTAS_GET_POWER_LEVEL, "get-power-level",
rtas_get_power_level);
spapr_rtas_register(RTAS_IBM_NMI_REGISTER, "ibm,nmi-register",
rtas_ibm_nmi_register);
spapr_rtas_register(RTAS_IBM_NMI_INTERLOCK, "ibm,nmi-interlock",
rtas_ibm_nmi_interlock);
qtest_set_command_cb(spapr_qtest_callback);
}
type_init(core_rtas_register_types)