qemu/hw/sm501.c

1450 lines
41 KiB
C
Raw Normal View History

/*
* QEMU SM501 Device
*
* Copyright (c) 2008 Shin-ichiro KAWASAKI
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdio.h>
#include "hw.h"
#include "pc.h"
#include "console.h"
#include "devices.h"
#include "sysbus.h"
#include "qdev-addr.h"
#include "range.h"
/*
* Status: 2010/05/07
* - Minimum implementation for Linux console : mmio regs and CRT layer.
* - 2D grapihcs acceleration partially supported : only fill rectangle.
*
* TODO:
* - Panel support
* - Touch panel support
* - USB support
* - UART support
* - More 2D graphics engine support
* - Performance tuning
*/
//#define DEBUG_SM501
//#define DEBUG_BITBLT
#ifdef DEBUG_SM501
#define SM501_DPRINTF(fmt, ...) printf(fmt, ## __VA_ARGS__)
#else
#define SM501_DPRINTF(fmt, ...) do {} while(0)
#endif
#define MMIO_BASE_OFFSET 0x3e00000
/* SM501 register definitions taken from "linux/include/linux/sm501-regs.h" */
/* System Configuration area */
/* System config base */
#define SM501_SYS_CONFIG (0x000000)
/* config 1 */
#define SM501_SYSTEM_CONTROL (0x000000)
#define SM501_SYSCTRL_PANEL_TRISTATE (1<<0)
#define SM501_SYSCTRL_MEM_TRISTATE (1<<1)
#define SM501_SYSCTRL_CRT_TRISTATE (1<<2)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4)
#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1<<6)
#define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7)
#define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1<<11)
#define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15)
/* miscellaneous control */
#define SM501_MISC_CONTROL (0x000004)
#define SM501_MISC_BUS_SH (0x0)
#define SM501_MISC_BUS_PCI (0x1)
#define SM501_MISC_BUS_XSCALE (0x2)
#define SM501_MISC_BUS_NEC (0x6)
#define SM501_MISC_BUS_MASK (0x7)
#define SM501_MISC_VR_62MB (1<<3)
#define SM501_MISC_CDR_RESET (1<<7)
#define SM501_MISC_USB_LB (1<<8)
#define SM501_MISC_USB_SLAVE (1<<9)
#define SM501_MISC_BL_1 (1<<10)
#define SM501_MISC_MC (1<<11)
#define SM501_MISC_DAC_POWER (1<<12)
#define SM501_MISC_IRQ_INVERT (1<<16)
#define SM501_MISC_SH (1<<17)
#define SM501_MISC_HOLD_EMPTY (0<<18)
#define SM501_MISC_HOLD_8 (1<<18)
#define SM501_MISC_HOLD_16 (2<<18)
#define SM501_MISC_HOLD_24 (3<<18)
#define SM501_MISC_HOLD_32 (4<<18)
#define SM501_MISC_HOLD_MASK (7<<18)
#define SM501_MISC_FREQ_12 (1<<24)
#define SM501_MISC_PNL_24BIT (1<<25)
#define SM501_MISC_8051_LE (1<<26)
#define SM501_GPIO31_0_CONTROL (0x000008)
#define SM501_GPIO63_32_CONTROL (0x00000C)
#define SM501_DRAM_CONTROL (0x000010)
/* command list */
#define SM501_ARBTRTN_CONTROL (0x000014)
/* command list */
#define SM501_COMMAND_LIST_STATUS (0x000024)
/* interrupt debug */
#define SM501_RAW_IRQ_STATUS (0x000028)
#define SM501_RAW_IRQ_CLEAR (0x000028)
#define SM501_IRQ_STATUS (0x00002C)
#define SM501_IRQ_MASK (0x000030)
#define SM501_DEBUG_CONTROL (0x000034)
/* power management */
#define SM501_POWERMODE_P2X_SRC (1<<29)
#define SM501_POWERMODE_V2X_SRC (1<<20)
#define SM501_POWERMODE_M_SRC (1<<12)
#define SM501_POWERMODE_M1_SRC (1<<4)
#define SM501_CURRENT_GATE (0x000038)
#define SM501_CURRENT_CLOCK (0x00003C)
#define SM501_POWER_MODE_0_GATE (0x000040)
#define SM501_POWER_MODE_0_CLOCK (0x000044)
#define SM501_POWER_MODE_1_GATE (0x000048)
#define SM501_POWER_MODE_1_CLOCK (0x00004C)
#define SM501_SLEEP_MODE_GATE (0x000050)
#define SM501_POWER_MODE_CONTROL (0x000054)
/* power gates for units within the 501 */
#define SM501_GATE_HOST (0)
#define SM501_GATE_MEMORY (1)
#define SM501_GATE_DISPLAY (2)
#define SM501_GATE_2D_ENGINE (3)
#define SM501_GATE_CSC (4)
#define SM501_GATE_ZVPORT (5)
#define SM501_GATE_GPIO (6)
#define SM501_GATE_UART0 (7)
#define SM501_GATE_UART1 (8)
#define SM501_GATE_SSP (10)
#define SM501_GATE_USB_HOST (11)
#define SM501_GATE_USB_GADGET (12)
#define SM501_GATE_UCONTROLLER (17)
#define SM501_GATE_AC97 (18)
/* panel clock */
#define SM501_CLOCK_P2XCLK (24)
/* crt clock */
#define SM501_CLOCK_V2XCLK (16)
/* main clock */
#define SM501_CLOCK_MCLK (8)
/* SDRAM controller clock */
#define SM501_CLOCK_M1XCLK (0)
/* config 2 */
#define SM501_PCI_MASTER_BASE (0x000058)
#define SM501_ENDIAN_CONTROL (0x00005C)
#define SM501_DEVICEID (0x000060)
/* 0x050100A0 */
#define SM501_DEVICEID_SM501 (0x05010000)
#define SM501_DEVICEID_IDMASK (0xffff0000)
#define SM501_DEVICEID_REVMASK (0x000000ff)
#define SM501_PLLCLOCK_COUNT (0x000064)
#define SM501_MISC_TIMING (0x000068)
#define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
#define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074)
/* GPIO base */
#define SM501_GPIO (0x010000)
#define SM501_GPIO_DATA_LOW (0x00)
#define SM501_GPIO_DATA_HIGH (0x04)
#define SM501_GPIO_DDR_LOW (0x08)
#define SM501_GPIO_DDR_HIGH (0x0C)
#define SM501_GPIO_IRQ_SETUP (0x10)
#define SM501_GPIO_IRQ_STATUS (0x14)
#define SM501_GPIO_IRQ_RESET (0x14)
/* I2C controller base */
#define SM501_I2C (0x010040)
#define SM501_I2C_BYTE_COUNT (0x00)
#define SM501_I2C_CONTROL (0x01)
#define SM501_I2C_STATUS (0x02)
#define SM501_I2C_RESET (0x02)
#define SM501_I2C_SLAVE_ADDRESS (0x03)
#define SM501_I2C_DATA (0x04)
/* SSP base */
#define SM501_SSP (0x020000)
/* Uart 0 base */
#define SM501_UART0 (0x030000)
/* Uart 1 base */
#define SM501_UART1 (0x030020)
/* USB host port base */
#define SM501_USB_HOST (0x040000)
/* USB slave/gadget base */
#define SM501_USB_GADGET (0x060000)
/* USB slave/gadget data port base */
#define SM501_USB_GADGET_DATA (0x070000)
/* Display controller/video engine base */
#define SM501_DC (0x080000)
/* common defines for the SM501 address registers */
#define SM501_ADDR_FLIP (1<<31)
#define SM501_ADDR_EXT (1<<27)
#define SM501_ADDR_CS1 (1<<26)
#define SM501_ADDR_MASK (0x3f << 26)
#define SM501_FIFO_MASK (0x3 << 16)
#define SM501_FIFO_1 (0x0 << 16)
#define SM501_FIFO_3 (0x1 << 16)
#define SM501_FIFO_7 (0x2 << 16)
#define SM501_FIFO_11 (0x3 << 16)
/* common registers for panel and the crt */
#define SM501_OFF_DC_H_TOT (0x000)
#define SM501_OFF_DC_V_TOT (0x008)
#define SM501_OFF_DC_H_SYNC (0x004)
#define SM501_OFF_DC_V_SYNC (0x00C)
#define SM501_DC_PANEL_CONTROL (0x000)
#define SM501_DC_PANEL_CONTROL_FPEN (1<<27)
#define SM501_DC_PANEL_CONTROL_BIAS (1<<26)
#define SM501_DC_PANEL_CONTROL_DATA (1<<25)
#define SM501_DC_PANEL_CONTROL_VDD (1<<24)
#define SM501_DC_PANEL_CONTROL_DP (1<<23)
#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21)
#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21)
#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21)
#define SM501_DC_PANEL_CONTROL_DE (1<<20)
#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18)
#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18)
#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
#define SM501_DC_PANEL_CONTROL_CP (1<<14)
#define SM501_DC_PANEL_CONTROL_VSP (1<<13)
#define SM501_DC_PANEL_CONTROL_HSP (1<<12)
#define SM501_DC_PANEL_CONTROL_CK (1<<9)
#define SM501_DC_PANEL_CONTROL_TE (1<<8)
#define SM501_DC_PANEL_CONTROL_VPD (1<<7)
#define SM501_DC_PANEL_CONTROL_VP (1<<6)
#define SM501_DC_PANEL_CONTROL_HPD (1<<5)
#define SM501_DC_PANEL_CONTROL_HP (1<<4)
#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3)
#define SM501_DC_PANEL_CONTROL_EN (1<<2)
#define SM501_DC_PANEL_CONTROL_8BPP (0<<0)
#define SM501_DC_PANEL_CONTROL_16BPP (1<<0)
#define SM501_DC_PANEL_CONTROL_32BPP (2<<0)
#define SM501_DC_PANEL_PANNING_CONTROL (0x004)
#define SM501_DC_PANEL_COLOR_KEY (0x008)
#define SM501_DC_PANEL_FB_ADDR (0x00C)
#define SM501_DC_PANEL_FB_OFFSET (0x010)
#define SM501_DC_PANEL_FB_WIDTH (0x014)
#define SM501_DC_PANEL_FB_HEIGHT (0x018)
#define SM501_DC_PANEL_TL_LOC (0x01C)
#define SM501_DC_PANEL_BR_LOC (0x020)
#define SM501_DC_PANEL_H_TOT (0x024)
#define SM501_DC_PANEL_H_SYNC (0x028)
#define SM501_DC_PANEL_V_TOT (0x02C)
#define SM501_DC_PANEL_V_SYNC (0x030)
#define SM501_DC_PANEL_CUR_LINE (0x034)
#define SM501_DC_VIDEO_CONTROL (0x040)
#define SM501_DC_VIDEO_FB0_ADDR (0x044)
#define SM501_DC_VIDEO_FB_WIDTH (0x048)
#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C)
#define SM501_DC_VIDEO_TL_LOC (0x050)
#define SM501_DC_VIDEO_BR_LOC (0x054)
#define SM501_DC_VIDEO_SCALE (0x058)
#define SM501_DC_VIDEO_INIT_SCALE (0x05C)
#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060)
#define SM501_DC_VIDEO_FB1_ADDR (0x064)
#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068)
#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080)
#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084)
#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088)
#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C)
#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090)
#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094)
#define SM501_DC_VIDEO_ALPHA_SCALE (0x098)
#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C)
#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0)
#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4)
#define SM501_DC_PANEL_HWC_BASE (0x0F0)
#define SM501_DC_PANEL_HWC_ADDR (0x0F0)
#define SM501_DC_PANEL_HWC_LOC (0x0F4)
#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8)
#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC)
#define SM501_HWC_EN (1<<31)
#define SM501_OFF_HWC_ADDR (0x00)
#define SM501_OFF_HWC_LOC (0x04)
#define SM501_OFF_HWC_COLOR_1_2 (0x08)
#define SM501_OFF_HWC_COLOR_3 (0x0C)
#define SM501_DC_ALPHA_CONTROL (0x100)
#define SM501_DC_ALPHA_FB_ADDR (0x104)
#define SM501_DC_ALPHA_FB_OFFSET (0x108)
#define SM501_DC_ALPHA_TL_LOC (0x10C)
#define SM501_DC_ALPHA_BR_LOC (0x110)
#define SM501_DC_ALPHA_CHROMA_KEY (0x114)
#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118)
#define SM501_DC_CRT_CONTROL (0x200)
#define SM501_DC_CRT_CONTROL_TVP (1<<15)
#define SM501_DC_CRT_CONTROL_CP (1<<14)
#define SM501_DC_CRT_CONTROL_VSP (1<<13)
#define SM501_DC_CRT_CONTROL_HSP (1<<12)
#define SM501_DC_CRT_CONTROL_VS (1<<11)
#define SM501_DC_CRT_CONTROL_BLANK (1<<10)
#define SM501_DC_CRT_CONTROL_SEL (1<<9)
#define SM501_DC_CRT_CONTROL_TE (1<<8)
#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
#define SM501_DC_CRT_CONTROL_GAMMA (1<<3)
#define SM501_DC_CRT_CONTROL_ENABLE (1<<2)
#define SM501_DC_CRT_CONTROL_8BPP (0<<0)
#define SM501_DC_CRT_CONTROL_16BPP (1<<0)
#define SM501_DC_CRT_CONTROL_32BPP (2<<0)
#define SM501_DC_CRT_FB_ADDR (0x204)
#define SM501_DC_CRT_FB_OFFSET (0x208)
#define SM501_DC_CRT_H_TOT (0x20C)
#define SM501_DC_CRT_H_SYNC (0x210)
#define SM501_DC_CRT_V_TOT (0x214)
#define SM501_DC_CRT_V_SYNC (0x218)
#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C)
#define SM501_DC_CRT_CUR_LINE (0x220)
#define SM501_DC_CRT_MONITOR_DETECT (0x224)
#define SM501_DC_CRT_HWC_BASE (0x230)
#define SM501_DC_CRT_HWC_ADDR (0x230)
#define SM501_DC_CRT_HWC_LOC (0x234)
#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238)
#define SM501_DC_CRT_HWC_COLOR_3 (0x23C)
#define SM501_DC_PANEL_PALETTE (0x400)
#define SM501_DC_VIDEO_PALETTE (0x800)
#define SM501_DC_CRT_PALETTE (0xC00)
/* Zoom Video port base */
#define SM501_ZVPORT (0x090000)
/* AC97/I2S base */
#define SM501_AC97 (0x0A0000)
/* 8051 micro controller base */
#define SM501_UCONTROLLER (0x0B0000)
/* 8051 micro controller SRAM base */
#define SM501_UCONTROLLER_SRAM (0x0C0000)
/* DMA base */
#define SM501_DMA (0x0D0000)
/* 2d engine base */
#define SM501_2D_ENGINE (0x100000)
#define SM501_2D_SOURCE (0x00)
#define SM501_2D_DESTINATION (0x04)
#define SM501_2D_DIMENSION (0x08)
#define SM501_2D_CONTROL (0x0C)
#define SM501_2D_PITCH (0x10)
#define SM501_2D_FOREGROUND (0x14)
#define SM501_2D_BACKGROUND (0x18)
#define SM501_2D_STRETCH (0x1C)
#define SM501_2D_COLOR_COMPARE (0x20)
#define SM501_2D_COLOR_COMPARE_MASK (0x24)
#define SM501_2D_MASK (0x28)
#define SM501_2D_CLIP_TL (0x2C)
#define SM501_2D_CLIP_BR (0x30)
#define SM501_2D_MONO_PATTERN_LOW (0x34)
#define SM501_2D_MONO_PATTERN_HIGH (0x38)
#define SM501_2D_WINDOW_WIDTH (0x3C)
#define SM501_2D_SOURCE_BASE (0x40)
#define SM501_2D_DESTINATION_BASE (0x44)
#define SM501_2D_ALPHA (0x48)
#define SM501_2D_WRAP (0x4C)
#define SM501_2D_STATUS (0x50)
#define SM501_CSC_Y_SOURCE_BASE (0xC8)
#define SM501_CSC_CONSTANTS (0xCC)
#define SM501_CSC_Y_SOURCE_X (0xD0)
#define SM501_CSC_Y_SOURCE_Y (0xD4)
#define SM501_CSC_U_SOURCE_BASE (0xD8)
#define SM501_CSC_V_SOURCE_BASE (0xDC)
#define SM501_CSC_SOURCE_DIMENSION (0xE0)
#define SM501_CSC_SOURCE_PITCH (0xE4)
#define SM501_CSC_DESTINATION (0xE8)
#define SM501_CSC_DESTINATION_DIMENSION (0xEC)
#define SM501_CSC_DESTINATION_PITCH (0xF0)
#define SM501_CSC_SCALE_FACTOR (0xF4)
#define SM501_CSC_DESTINATION_BASE (0xF8)
#define SM501_CSC_CONTROL (0xFC)
/* 2d engine data port base */
#define SM501_2D_ENGINE_DATA (0x110000)
/* end of register definitions */
#define SM501_HWC_WIDTH (64)
#define SM501_HWC_HEIGHT (64)
/* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */
static const uint32_t sm501_mem_local_size[] = {
[0] = 4*1024*1024,
[1] = 8*1024*1024,
[2] = 16*1024*1024,
[3] = 32*1024*1024,
[4] = 64*1024*1024,
[5] = 2*1024*1024,
};
#define get_local_mem_size(s) sm501_mem_local_size[(s)->local_mem_size_index]
typedef struct SM501State {
/* graphic console status */
DisplayState *ds;
/* status & internal resources */
target_phys_addr_t base;
uint32_t local_mem_size_index;
uint8_t * local_mem;
MemoryRegion local_mem_region;
uint32_t last_width;
uint32_t last_height;
/* mmio registers */
uint32_t system_control;
uint32_t misc_control;
uint32_t gpio_31_0_control;
uint32_t gpio_63_32_control;
uint32_t dram_control;
uint32_t irq_mask;
uint32_t misc_timing;
uint32_t power_mode_control;
uint32_t uart0_ier;
uint32_t uart0_lcr;
uint32_t uart0_mcr;
uint32_t uart0_scr;
uint8_t dc_palette[0x400 * 3];
uint32_t dc_panel_control;
uint32_t dc_panel_panning_control;
uint32_t dc_panel_fb_addr;
uint32_t dc_panel_fb_offset;
uint32_t dc_panel_fb_width;
uint32_t dc_panel_fb_height;
uint32_t dc_panel_tl_location;
uint32_t dc_panel_br_location;
uint32_t dc_panel_h_total;
uint32_t dc_panel_h_sync;
uint32_t dc_panel_v_total;
uint32_t dc_panel_v_sync;
uint32_t dc_panel_hwc_addr;
uint32_t dc_panel_hwc_location;
uint32_t dc_panel_hwc_color_1_2;
uint32_t dc_panel_hwc_color_3;
uint32_t dc_crt_control;
uint32_t dc_crt_fb_addr;
uint32_t dc_crt_fb_offset;
uint32_t dc_crt_h_total;
uint32_t dc_crt_h_sync;
uint32_t dc_crt_v_total;
uint32_t dc_crt_v_sync;
uint32_t dc_crt_hwc_addr;
uint32_t dc_crt_hwc_location;
uint32_t dc_crt_hwc_color_1_2;
uint32_t dc_crt_hwc_color_3;
uint32_t twoD_source;
uint32_t twoD_destination;
uint32_t twoD_dimension;
uint32_t twoD_control;
uint32_t twoD_pitch;
uint32_t twoD_foreground;
uint32_t twoD_stretch;
uint32_t twoD_color_compare_mask;
uint32_t twoD_mask;
uint32_t twoD_window_width;
uint32_t twoD_source_base;
uint32_t twoD_destination_base;
} SM501State;
static uint32_t get_local_mem_size_index(uint32_t size)
{
uint32_t norm_size = 0;
int i, index = 0;
for (i = 0; i < ARRAY_SIZE(sm501_mem_local_size); i++) {
uint32_t new_size = sm501_mem_local_size[i];
if (new_size >= size) {
if (norm_size == 0 || norm_size > new_size) {
norm_size = new_size;
index = i;
}
}
}
return index;
}
/**
* Check the availability of hardware cursor.
* @param crt 0 for PANEL, 1 for CRT.
*/
static inline int is_hwc_enabled(SM501State *state, int crt)
{
uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr;
return addr & 0x80000000;
}
/**
* Get the address which holds cursor pattern data.
* @param crt 0 for PANEL, 1 for CRT.
*/
static inline uint32_t get_hwc_address(SM501State *state, int crt)
{
uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr;
return (addr & 0x03FFFFF0)/* >> 4*/;
}
/**
* Get the cursor position in y coordinate.
* @param crt 0 for PANEL, 1 for CRT.
*/
static inline uint32_t get_hwc_y(SM501State *state, int crt)
{
uint32_t location = crt ? state->dc_crt_hwc_location
: state->dc_panel_hwc_location;
return (location & 0x07FF0000) >> 16;
}
/**
* Get the cursor position in x coordinate.
* @param crt 0 for PANEL, 1 for CRT.
*/
static inline uint32_t get_hwc_x(SM501State *state, int crt)
{
uint32_t location = crt ? state->dc_crt_hwc_location
: state->dc_panel_hwc_location;
return location & 0x000007FF;
}
/**
* Get the cursor position in x coordinate.
* @param crt 0 for PANEL, 1 for CRT.
* @param index 0, 1, 2 or 3 which specifies color of corsor dot.
*/
static inline uint16_t get_hwc_color(SM501State *state, int crt, int index)
{
uint16_t color_reg = 0;
uint16_t color_565 = 0;
if (index == 0) {
return 0;
}
switch (index) {
case 1:
case 2:
color_reg = crt ? state->dc_crt_hwc_color_1_2
: state->dc_panel_hwc_color_1_2;
break;
case 3:
color_reg = crt ? state->dc_crt_hwc_color_3
: state->dc_panel_hwc_color_3;
break;
default:
printf("invalid hw cursor color.\n");
abort();
}
switch (index) {
case 1:
case 3:
color_565 = (uint16_t)(color_reg & 0xFFFF);
break;
case 2:
color_565 = (uint16_t)((color_reg >> 16) & 0xFFFF);
break;
}
return color_565;
}
static int within_hwc_y_range(SM501State *state, int y, int crt)
{
int hwc_y = get_hwc_y(state, crt);
return (hwc_y <= y && y < hwc_y + SM501_HWC_HEIGHT);
}
static void sm501_2d_operation(SM501State * s)
{
/* obtain operation parameters */
int operation = (s->twoD_control >> 16) & 0x1f;
int rtl = s->twoD_control & 0x8000000;
int src_x = (s->twoD_source >> 16) & 0x01FFF;
int src_y = s->twoD_source & 0xFFFF;
int dst_x = (s->twoD_destination >> 16) & 0x01FFF;
int dst_y = s->twoD_destination & 0xFFFF;
int operation_width = (s->twoD_dimension >> 16) & 0x1FFF;
int operation_height = s->twoD_dimension & 0xFFFF;
uint32_t color = s->twoD_foreground;
int format_flags = (s->twoD_stretch >> 20) & 0x3;
int addressing = (s->twoD_stretch >> 16) & 0xF;
/* get frame buffer info */
uint8_t * src = s->local_mem + (s->twoD_source_base & 0x03FFFFFF);
uint8_t * dst = s->local_mem + (s->twoD_destination_base & 0x03FFFFFF);
int src_width = (s->dc_crt_h_total & 0x00000FFF) + 1;
int dst_width = (s->dc_crt_h_total & 0x00000FFF) + 1;
if (addressing != 0x0) {
printf("%s: only XY addressing is supported.\n", __func__);
abort();
}
if ((s->twoD_source_base & 0x08000000) ||
(s->twoD_destination_base & 0x08000000)) {
printf("%s: only local memory is supported.\n", __func__);
abort();
}
switch (operation) {
case 0x00: /* copy area */
#define COPY_AREA(_bpp, _pixel_type, rtl) { \
int y, x, index_d, index_s; \
for (y = 0; y < operation_height; y++) { \
for (x = 0; x < operation_width; x++) { \
if (rtl) { \
index_s = ((src_y - y) * src_width + src_x - x) * _bpp; \
index_d = ((dst_y - y) * dst_width + dst_x - x) * _bpp; \
} else { \
index_s = ((src_y + y) * src_width + src_x + x) * _bpp; \
index_d = ((dst_y + y) * dst_width + dst_x + x) * _bpp; \
} \
*(_pixel_type*)&dst[index_d] = *(_pixel_type*)&src[index_s];\
} \
} \
}
switch (format_flags) {
case 0:
COPY_AREA(1, uint8_t, rtl);
break;
case 1:
COPY_AREA(2, uint16_t, rtl);
break;
case 2:
COPY_AREA(4, uint32_t, rtl);
break;
}
break;
case 0x01: /* fill rectangle */
#define FILL_RECT(_bpp, _pixel_type) { \
int y, x; \
for (y = 0; y < operation_height; y++) { \
for (x = 0; x < operation_width; x++) { \
int index = ((dst_y + y) * dst_width + dst_x + x) * _bpp; \
*(_pixel_type*)&dst[index] = (_pixel_type)color; \
} \
} \
}
switch (format_flags) {
case 0:
FILL_RECT(1, uint8_t);
break;
case 1:
FILL_RECT(2, uint16_t);
break;
case 2:
FILL_RECT(4, uint32_t);
break;
}
break;
default:
printf("non-implemented SM501 2D operation. %d\n", operation);
abort();
break;
}
}
static uint64_t sm501_system_config_read(void *opaque, target_phys_addr_t addr,
unsigned size)
{
SM501State * s = (SM501State *)opaque;
uint32_t ret = 0;
SM501_DPRINTF("sm501 system config regs : read addr=%x\n", (int)addr);
switch(addr) {
case SM501_SYSTEM_CONTROL:
ret = s->system_control;
break;
case SM501_MISC_CONTROL:
ret = s->misc_control;
break;
case SM501_GPIO31_0_CONTROL:
ret = s->gpio_31_0_control;
break;
case SM501_GPIO63_32_CONTROL:
ret = s->gpio_63_32_control;
break;
case SM501_DEVICEID:
ret = 0x050100A0;
break;
case SM501_DRAM_CONTROL:
ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13;
break;
case SM501_IRQ_MASK:
ret = s->irq_mask;
break;
case SM501_MISC_TIMING:
/* TODO : simulate gate control */
ret = s->misc_timing;
break;
case SM501_CURRENT_GATE:
/* TODO : simulate gate control */
ret = 0x00021807;
break;
case SM501_CURRENT_CLOCK:
ret = 0x2A1A0A09;
break;
case SM501_POWER_MODE_CONTROL:
ret = s->power_mode_control;
break;
default:
printf("sm501 system config : not implemented register read."
" addr=%x\n", (int)addr);
abort();
}
return ret;
}
static void sm501_system_config_write(void *opaque, target_phys_addr_t addr,
uint64_t value, unsigned size)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 system config regs : write addr=%x, val=%x\n",
(uint32_t)addr, (uint32_t)value);
switch(addr) {
case SM501_SYSTEM_CONTROL:
s->system_control = value & 0xE300B8F7;
break;
case SM501_MISC_CONTROL:
s->misc_control = value & 0xFF7FFF20;
break;
case SM501_GPIO31_0_CONTROL:
s->gpio_31_0_control = value;
break;
case SM501_GPIO63_32_CONTROL:
s->gpio_63_32_control = value;
break;
case SM501_DRAM_CONTROL:
s->local_mem_size_index = (value >> 13) & 0x7;
/* rODO : check validity of size change */
s->dram_control |= value & 0x7FFFFFC3;
break;
case SM501_IRQ_MASK:
s->irq_mask = value;
break;
case SM501_MISC_TIMING:
s->misc_timing = value & 0xF31F1FFF;
break;
case SM501_POWER_MODE_0_GATE:
case SM501_POWER_MODE_1_GATE:
case SM501_POWER_MODE_0_CLOCK:
case SM501_POWER_MODE_1_CLOCK:
/* TODO : simulate gate & clock control */
break;
case SM501_POWER_MODE_CONTROL:
s->power_mode_control = value & 0x00000003;
break;
default:
printf("sm501 system config : not implemented register write."
" addr=%x, val=%x\n", (int)addr, (uint32_t)value);
abort();
}
}
static const MemoryRegionOps sm501_system_config_ops = {
.read = sm501_system_config_read,
.write = sm501_system_config_write,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
static uint32_t sm501_palette_read(void *opaque, target_phys_addr_t addr)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 palette read addr=%x\n", (int)addr);
/* TODO : consider BYTE/WORD access */
/* TODO : consider endian */
assert(range_covers_byte(0, 0x400 * 3, addr));
return *(uint32_t*)&s->dc_palette[addr];
}
static void sm501_palette_write(void *opaque,
target_phys_addr_t addr, uint32_t value)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 palette write addr=%x, val=%x\n",
(int)addr, value);
/* TODO : consider BYTE/WORD access */
/* TODO : consider endian */
assert(range_covers_byte(0, 0x400 * 3, addr));
*(uint32_t*)&s->dc_palette[addr] = value;
}
static uint64_t sm501_disp_ctrl_read(void *opaque, target_phys_addr_t addr,
unsigned size)
{
SM501State * s = (SM501State *)opaque;
uint32_t ret = 0;
SM501_DPRINTF("sm501 disp ctrl regs : read addr=%x\n", (int)addr);
switch(addr) {
case SM501_DC_PANEL_CONTROL:
ret = s->dc_panel_control;
break;
case SM501_DC_PANEL_PANNING_CONTROL:
ret = s->dc_panel_panning_control;
break;
case SM501_DC_PANEL_FB_ADDR:
ret = s->dc_panel_fb_addr;
break;
case SM501_DC_PANEL_FB_OFFSET:
ret = s->dc_panel_fb_offset;
break;
case SM501_DC_PANEL_FB_WIDTH:
ret = s->dc_panel_fb_width;
break;
case SM501_DC_PANEL_FB_HEIGHT:
ret = s->dc_panel_fb_height;
break;
case SM501_DC_PANEL_TL_LOC:
ret = s->dc_panel_tl_location;
break;
case SM501_DC_PANEL_BR_LOC:
ret = s->dc_panel_br_location;
break;
case SM501_DC_PANEL_H_TOT:
ret = s->dc_panel_h_total;
break;
case SM501_DC_PANEL_H_SYNC:
ret = s->dc_panel_h_sync;
break;
case SM501_DC_PANEL_V_TOT:
ret = s->dc_panel_v_total;
break;
case SM501_DC_PANEL_V_SYNC:
ret = s->dc_panel_v_sync;
break;
case SM501_DC_CRT_CONTROL:
ret = s->dc_crt_control;
break;
case SM501_DC_CRT_FB_ADDR:
ret = s->dc_crt_fb_addr;
break;
case SM501_DC_CRT_FB_OFFSET:
ret = s->dc_crt_fb_offset;
break;
case SM501_DC_CRT_H_TOT:
ret = s->dc_crt_h_total;
break;
case SM501_DC_CRT_H_SYNC:
ret = s->dc_crt_h_sync;
break;
case SM501_DC_CRT_V_TOT:
ret = s->dc_crt_v_total;
break;
case SM501_DC_CRT_V_SYNC:
ret = s->dc_crt_v_sync;
break;
case SM501_DC_CRT_HWC_ADDR:
ret = s->dc_crt_hwc_addr;
break;
case SM501_DC_CRT_HWC_LOC:
ret = s->dc_crt_hwc_location;
break;
case SM501_DC_CRT_HWC_COLOR_1_2:
ret = s->dc_crt_hwc_color_1_2;
break;
case SM501_DC_CRT_HWC_COLOR_3:
ret = s->dc_crt_hwc_color_3;
break;
case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
ret = sm501_palette_read(opaque, addr - SM501_DC_PANEL_PALETTE);
break;
default:
printf("sm501 disp ctrl : not implemented register read."
" addr=%x\n", (int)addr);
abort();
}
return ret;
}
static void sm501_disp_ctrl_write(void *opaque, target_phys_addr_t addr,
uint64_t value, unsigned size)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 disp ctrl regs : write addr=%x, val=%x\n",
(unsigned)addr, (unsigned)value);
switch(addr) {
case SM501_DC_PANEL_CONTROL:
s->dc_panel_control = value & 0x0FFF73FF;
break;
case SM501_DC_PANEL_PANNING_CONTROL:
s->dc_panel_panning_control = value & 0xFF3FFF3F;
break;
case SM501_DC_PANEL_FB_ADDR:
s->dc_panel_fb_addr = value & 0x8FFFFFF0;
break;
case SM501_DC_PANEL_FB_OFFSET:
s->dc_panel_fb_offset = value & 0x3FF03FF0;
break;
case SM501_DC_PANEL_FB_WIDTH:
s->dc_panel_fb_width = value & 0x0FFF0FFF;
break;
case SM501_DC_PANEL_FB_HEIGHT:
s->dc_panel_fb_height = value & 0x0FFF0FFF;
break;
case SM501_DC_PANEL_TL_LOC:
s->dc_panel_tl_location = value & 0x07FF07FF;
break;
case SM501_DC_PANEL_BR_LOC:
s->dc_panel_br_location = value & 0x07FF07FF;
break;
case SM501_DC_PANEL_H_TOT:
s->dc_panel_h_total = value & 0x0FFF0FFF;
break;
case SM501_DC_PANEL_H_SYNC:
s->dc_panel_h_sync = value & 0x00FF0FFF;
break;
case SM501_DC_PANEL_V_TOT:
s->dc_panel_v_total = value & 0x0FFF0FFF;
break;
case SM501_DC_PANEL_V_SYNC:
s->dc_panel_v_sync = value & 0x003F0FFF;
break;
case SM501_DC_PANEL_HWC_ADDR:
s->dc_panel_hwc_addr = value & 0x8FFFFFF0;
break;
case SM501_DC_PANEL_HWC_LOC:
s->dc_panel_hwc_location = value & 0x0FFF0FFF;
break;
case SM501_DC_PANEL_HWC_COLOR_1_2:
s->dc_panel_hwc_color_1_2 = value;
break;
case SM501_DC_PANEL_HWC_COLOR_3:
s->dc_panel_hwc_color_3 = value & 0x0000FFFF;
break;
case SM501_DC_CRT_CONTROL:
s->dc_crt_control = value & 0x0003FFFF;
break;
case SM501_DC_CRT_FB_ADDR:
s->dc_crt_fb_addr = value & 0x8FFFFFF0;
break;
case SM501_DC_CRT_FB_OFFSET:
s->dc_crt_fb_offset = value & 0x3FF03FF0;
break;
case SM501_DC_CRT_H_TOT:
s->dc_crt_h_total = value & 0x0FFF0FFF;
break;
case SM501_DC_CRT_H_SYNC:
s->dc_crt_h_sync = value & 0x00FF0FFF;
break;
case SM501_DC_CRT_V_TOT:
s->dc_crt_v_total = value & 0x0FFF0FFF;
break;
case SM501_DC_CRT_V_SYNC:
s->dc_crt_v_sync = value & 0x003F0FFF;
break;
case SM501_DC_CRT_HWC_ADDR:
s->dc_crt_hwc_addr = value & 0x8FFFFFF0;
break;
case SM501_DC_CRT_HWC_LOC:
s->dc_crt_hwc_location = value & 0x0FFF0FFF;
break;
case SM501_DC_CRT_HWC_COLOR_1_2:
s->dc_crt_hwc_color_1_2 = value;
break;
case SM501_DC_CRT_HWC_COLOR_3:
s->dc_crt_hwc_color_3 = value & 0x0000FFFF;
break;
case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
sm501_palette_write(opaque, addr - SM501_DC_PANEL_PALETTE, value);
break;
default:
printf("sm501 disp ctrl : not implemented register write."
" addr=%x, val=%x\n", (int)addr, (unsigned)value);
abort();
}
}
static const MemoryRegionOps sm501_disp_ctrl_ops = {
.read = sm501_disp_ctrl_read,
.write = sm501_disp_ctrl_write,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
static uint64_t sm501_2d_engine_read(void *opaque, target_phys_addr_t addr,
unsigned size)
{
SM501State * s = (SM501State *)opaque;
uint32_t ret = 0;
SM501_DPRINTF("sm501 2d engine regs : read addr=%x\n", (int)addr);
switch(addr) {
case SM501_2D_SOURCE_BASE:
ret = s->twoD_source_base;
break;
default:
printf("sm501 disp ctrl : not implemented register read."
" addr=%x\n", (int)addr);
abort();
}
return ret;
}
static void sm501_2d_engine_write(void *opaque, target_phys_addr_t addr,
uint64_t value, unsigned size)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 2d engine regs : write addr=%x, val=%x\n",
(unsigned)addr, (unsigned)value);
switch(addr) {
case SM501_2D_SOURCE:
s->twoD_source = value;
break;
case SM501_2D_DESTINATION:
s->twoD_destination = value;
break;
case SM501_2D_DIMENSION:
s->twoD_dimension = value;
break;
case SM501_2D_CONTROL:
s->twoD_control = value;
/* do 2d operation if start flag is set. */
if (value & 0x80000000) {
sm501_2d_operation(s);
s->twoD_control &= ~0x80000000; /* start flag down */
}
break;
case SM501_2D_PITCH:
s->twoD_pitch = value;
break;
case SM501_2D_FOREGROUND:
s->twoD_foreground = value;
break;
case SM501_2D_STRETCH:
s->twoD_stretch = value;
break;
case SM501_2D_COLOR_COMPARE_MASK:
s->twoD_color_compare_mask = value;
break;
case SM501_2D_MASK:
s->twoD_mask = value;
break;
case SM501_2D_WINDOW_WIDTH:
s->twoD_window_width = value;
break;
case SM501_2D_SOURCE_BASE:
s->twoD_source_base = value;
break;
case SM501_2D_DESTINATION_BASE:
s->twoD_destination_base = value;
break;
default:
printf("sm501 2d engine : not implemented register write."
" addr=%x, val=%x\n", (int)addr, (unsigned)value);
abort();
}
}
static const MemoryRegionOps sm501_2d_engine_ops = {
.read = sm501_2d_engine_read,
.write = sm501_2d_engine_write,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
/* draw line functions for all console modes */
#include "pixel_ops.h"
typedef void draw_line_func(uint8_t *d, const uint8_t *s,
int width, const uint32_t *pal);
typedef void draw_hwc_line_func(SM501State * s, int crt, uint8_t * palette,
int c_y, uint8_t *d, int width);
#define DEPTH 8
#include "sm501_template.h"
#define DEPTH 15
#include "sm501_template.h"
#define BGR_FORMAT
#define DEPTH 15
#include "sm501_template.h"
#define DEPTH 16
#include "sm501_template.h"
#define BGR_FORMAT
#define DEPTH 16
#include "sm501_template.h"
#define DEPTH 32
#include "sm501_template.h"
#define BGR_FORMAT
#define DEPTH 32
#include "sm501_template.h"
static draw_line_func * draw_line8_funcs[] = {
draw_line8_8,
draw_line8_15,
draw_line8_16,
draw_line8_32,
draw_line8_32bgr,
draw_line8_15bgr,
draw_line8_16bgr,
};
static draw_line_func * draw_line16_funcs[] = {
draw_line16_8,
draw_line16_15,
draw_line16_16,
draw_line16_32,
draw_line16_32bgr,
draw_line16_15bgr,
draw_line16_16bgr,
};
static draw_line_func * draw_line32_funcs[] = {
draw_line32_8,
draw_line32_15,
draw_line32_16,
draw_line32_32,
draw_line32_32bgr,
draw_line32_15bgr,
draw_line32_16bgr,
};
static draw_hwc_line_func * draw_hwc_line_funcs[] = {
draw_hwc_line_8,
draw_hwc_line_15,
draw_hwc_line_16,
draw_hwc_line_32,
draw_hwc_line_32bgr,
draw_hwc_line_15bgr,
draw_hwc_line_16bgr,
};
static inline int get_depth_index(DisplayState *s)
{
switch(ds_get_bits_per_pixel(s)) {
default:
case 8:
return 0;
case 15:
return 1;
case 16:
return 2;
case 32:
DisplayAllocator interface (Stefano Stabellini) Hi all, this patch adds a DisplayAllocator interface that allows display frontends (sdl in particular) to provide a preallocated display buffer for the graphical backend to use. Whenever a graphical backend cannot use qemu_create_displaysurface_from because its own internal pixel format cannot be exported directly (text mode or graphical mode with color depth 8 or 24), it creates another display buffer in memory using qemu_create_displaysurface and does the conversion. This new buffer needs to be blitted into the sdl surface buffer every time we need to update portions of the screen. We can avoid this using the DisplayAllocator interace: sdl provides its own implementation of qemu_create_displaysurface, giving back the sdl surface buffer directly (as we used to do before the DisplayState changes). Since the buffer returned by sdl could be in bgr format we need to put back in the handlers of that case. This approach is good if the two following conditions are true: 1) the sdl surface is a software surface that resides in main memory; 2) the host display color depth is either 16 or 32 bpp. If first condition is false we can have bad performances using sdl and vnc together. If the second condition is false performances are certainly not going to improve but they shouldn't get worse either. The first condition is always true, at least on linux/X11 systems; but I believe is true also on other platforms. The second condition is true in the vast majority of the cases. This patch should also have the good side effect of solving the sdl 2D slowness malc was reporting on MacOS, because SDL_BlitSurface is not going to be called anymore when the guest is in text mode or 24bpp. However the root problem is still present so I suspect we may still see some slowness on MacOS when the guest is in 32 or 16 bpp. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6839 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 18:02:13 +03:00
if (is_surface_bgr(s->surface))
return 4;
else
return 3;
}
}
static void sm501_draw_crt(SM501State * s)
{
int y;
int width = (s->dc_crt_h_total & 0x00000FFF) + 1;
int height = (s->dc_crt_v_total & 0x00000FFF) + 1;
uint8_t * src = s->local_mem;
int src_bpp = 0;
int dst_bpp = ds_get_bytes_per_pixel(s->ds) + (ds_get_bits_per_pixel(s->ds) % 8 ? 1 : 0);
uint32_t * palette = (uint32_t *)&s->dc_palette[SM501_DC_CRT_PALETTE
- SM501_DC_PANEL_PALETTE];
uint8_t hwc_palette[3 * 3];
int ds_depth_index = get_depth_index(s->ds);
draw_line_func * draw_line = NULL;
draw_hwc_line_func * draw_hwc_line = NULL;
int full_update = 0;
int y_start = -1;
ram_addr_t page_min = ~0l;
ram_addr_t page_max = 0l;
ram_addr_t offset = 0;
/* choose draw_line function */
switch (s->dc_crt_control & 3) {
case SM501_DC_CRT_CONTROL_8BPP:
src_bpp = 1;
draw_line = draw_line8_funcs[ds_depth_index];
break;
case SM501_DC_CRT_CONTROL_16BPP:
src_bpp = 2;
draw_line = draw_line16_funcs[ds_depth_index];
break;
case SM501_DC_CRT_CONTROL_32BPP:
src_bpp = 4;
draw_line = draw_line32_funcs[ds_depth_index];
break;
default:
printf("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n",
s->dc_crt_control);
abort();
break;
}
/* set up to draw hardware cursor */
if (is_hwc_enabled(s, 1)) {
int i;
/* get cursor palette */
for (i = 0; i < 3; i++) {
uint16_t rgb565 = get_hwc_color(s, 1, i + 1);
hwc_palette[i * 3 + 0] = (rgb565 & 0xf800) >> 8; /* red */
hwc_palette[i * 3 + 1] = (rgb565 & 0x07e0) >> 3; /* green */
hwc_palette[i * 3 + 2] = (rgb565 & 0x001f) << 3; /* blue */
}
/* choose cursor draw line function */
draw_hwc_line = draw_hwc_line_funcs[ds_depth_index];
}
/* adjust console size */
if (s->last_width != width || s->last_height != height) {
qemu_console_resize(s->ds, width, height);
s->last_width = width;
s->last_height = height;
full_update = 1;
}
/* draw each line according to conditions */
for (y = 0; y < height; y++) {
int update_hwc = draw_hwc_line ? within_hwc_y_range(s, y, 1) : 0;
int update = full_update || update_hwc;
ram_addr_t page0 = offset & TARGET_PAGE_MASK;
ram_addr_t page1 = (offset + width * src_bpp - 1) & TARGET_PAGE_MASK;
ram_addr_t page;
/* check dirty flags for each line */
for (page = page0; page <= page1; page += TARGET_PAGE_SIZE)
if (memory_region_get_dirty(&s->local_mem_region, page,
DIRTY_MEMORY_VGA))
update = 1;
/* draw line and change status */
if (update) {
uint8_t * d = &(ds_get_data(s->ds)[y * width * dst_bpp]);
/* draw graphics layer */
draw_line(d, src, width, palette);
/* draw haredware cursor */
if (update_hwc) {
draw_hwc_line(s, 1, hwc_palette, y - get_hwc_y(s, 1), d, width);
}
if (y_start < 0)
y_start = y;
if (page0 < page_min)
page_min = page0;
if (page1 > page_max)
page_max = page1;
} else {
if (y_start >= 0) {
/* flush to display */
dpy_update(s->ds, 0, y_start, width, y - y_start);
y_start = -1;
}
}
src += width * src_bpp;
offset += width * src_bpp;
}
/* complete flush to display */
if (y_start >= 0)
dpy_update(s->ds, 0, y_start, width, y - y_start);
/* clear dirty flags */
if (page_min != ~0l) {
memory_region_reset_dirty(&s->local_mem_region,
page_min, page_max + TARGET_PAGE_SIZE,
DIRTY_MEMORY_VGA);
}
}
static void sm501_update_display(void *opaque)
{
SM501State * s = (SM501State *)opaque;
if (s->dc_crt_control & SM501_DC_CRT_CONTROL_ENABLE)
sm501_draw_crt(s);
}
void sm501_init(MemoryRegion *address_space_mem, uint32_t base,
uint32_t local_mem_bytes, qemu_irq irq, CharDriverState *chr)
{
SM501State * s;
DeviceState *dev;
MemoryRegion *sm501_system_config = g_new(MemoryRegion, 1);
MemoryRegion *sm501_disp_ctrl = g_new(MemoryRegion, 1);
MemoryRegion *sm501_2d_engine = g_new(MemoryRegion, 1);
/* allocate management data region */
s = (SM501State *)g_malloc0(sizeof(SM501State));
s->base = base;
s->local_mem_size_index
= get_local_mem_size_index(local_mem_bytes);
SM501_DPRINTF("local mem size=%x. index=%d\n", get_local_mem_size(s),
s->local_mem_size_index);
s->system_control = 0x00100000;
s->misc_control = 0x00001000; /* assumes SH, active=low */
s->dc_panel_control = 0x00010000;
s->dc_crt_control = 0x00010000;
/* allocate local memory */
memory_region_init_ram(&s->local_mem_region, NULL, "sm501.local",
local_mem_bytes);
s->local_mem = memory_region_get_ram_ptr(&s->local_mem_region);
memory_region_add_subregion(address_space_mem, base, &s->local_mem_region);
/* map mmio */
memory_region_init_io(sm501_system_config, &sm501_system_config_ops, s,
"sm501-system-config", 0x6c);
memory_region_add_subregion(address_space_mem, base + MMIO_BASE_OFFSET,
sm501_system_config);
memory_region_init_io(sm501_disp_ctrl, &sm501_disp_ctrl_ops, s,
"sm501-disp-ctrl", 0x1000);
memory_region_add_subregion(address_space_mem,
base + MMIO_BASE_OFFSET + SM501_DC,
sm501_disp_ctrl);
memory_region_init_io(sm501_2d_engine, &sm501_2d_engine_ops, s,
"sm501-2d-engine", 0x54);
memory_region_add_subregion(address_space_mem,
base + MMIO_BASE_OFFSET + SM501_2D_ENGINE,
sm501_2d_engine);
/* bridge to usb host emulation module */
dev = qdev_create(NULL, "sysbus-ohci");
qdev_prop_set_uint32(dev, "num-ports", 2);
qdev_prop_set_taddr(dev, "dma-offset", base);
qdev_init_nofail(dev);
sysbus_mmio_map(sysbus_from_qdev(dev), 0,
base + MMIO_BASE_OFFSET + SM501_USB_HOST);
sysbus_connect_irq(sysbus_from_qdev(dev), 0, irq);
/* bridge to serial emulation module */
if (chr) {
serial_mm_init(address_space_mem,
base + MMIO_BASE_OFFSET + SM501_UART0, 2,
NULL, /* TODO : chain irq to IRL */
115200, chr, DEVICE_NATIVE_ENDIAN);
}
/* create qemu graphic console */
s->ds = graphic_console_init(sm501_update_display, NULL,
NULL, NULL, s);
}