qemu/hw/net/virtio-net.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

3968 lines
125 KiB
C
Raw Normal View History

/*
* Virtio Network Device
*
* Copyright IBM, Corp. 2007
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
#include "qemu/atomic.h"
#include "qemu/iov.h"
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa With MQ enabled vdpa device and non-MQ supporting guest e.g. booting vdpa with mq=on over OVMF of single vqp, below assert failure is seen: ../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed. 0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6 1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6 2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6 3 0x00007f8ce3fec252 in () at /lib64/libc.so.6 4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563 5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558 6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557 7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false) at ../hw/virtio/virtio-pci.c:974 8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019 9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:361 10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289 11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370 12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945 13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292 14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...) at ../softmmu/memory.c:492 15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554 16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at ../softmmu/memory.c:1504 17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165 18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822 19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>) at ../softmmu/physmem.c:2914 20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924 21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903 22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49 23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556 24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0 25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6 The cause for the assert failure is due to that the vhost_dev index for the ctrl vq was not aligned with actual one in use by the guest. Upon multiqueue feature negotiation in virtio_net_set_multiqueue(), if guest doesn't support multiqueue, the guest vq layout would shrink to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl). This results in ctrl_vq taking a different vhost_dev group index than the default. We can map vq to the correct vhost_dev group by checking if MQ is supported by guest and successfully negotiated. Since the MQ feature is only present along with CTRL_VQ, we ensure the index 2 is only meant for the control vq while MQ is not supported by guest. Fixes: 22288fe ("virtio-net: vhost control virtqueue support") Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:13 +03:00
#include "qemu/log.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "hw/virtio/virtio.h"
#include "net/net.h"
#include "net/checksum.h"
#include "net/tap.h"
#include "qemu/error-report.h"
#include "qemu/timer.h"
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
#include "qemu/option.h"
#include "qemu/option_int.h"
#include "qemu/config-file.h"
#include "qapi/qmp/qdict.h"
#include "hw/virtio/virtio-net.h"
#include "net/vhost_net.h"
#include "net/announce.h"
#include "hw/virtio/virtio-bus.h"
#include "qapi/error.h"
#include "qapi/qapi-events-net.h"
#include "hw/qdev-properties.h"
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
#include "qapi/qapi-types-migration.h"
#include "qapi/qapi-events-migration.h"
#include "hw/virtio/virtio-access.h"
#include "migration/misc.h"
#include "standard-headers/linux/ethtool.h"
#include "sysemu/sysemu.h"
#include "trace.h"
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
#include "monitor/qdev.h"
#include "hw/pci/pci_device.h"
#include "net_rx_pkt.h"
#include "hw/virtio/vhost.h"
#include "sysemu/qtest.h"
#define VIRTIO_NET_VM_VERSION 11
#define MAX_VLAN (1 << 12) /* Per 802.1Q definition */
/* previously fixed value */
#define VIRTIO_NET_RX_QUEUE_DEFAULT_SIZE 256
#define VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE 256
/* for now, only allow larger queue_pairs; with virtio-1, guest can downsize */
#define VIRTIO_NET_RX_QUEUE_MIN_SIZE VIRTIO_NET_RX_QUEUE_DEFAULT_SIZE
#define VIRTIO_NET_TX_QUEUE_MIN_SIZE VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
#define VIRTIO_NET_IP4_ADDR_SIZE 8 /* ipv4 saddr + daddr */
#define VIRTIO_NET_TCP_FLAG 0x3F
#define VIRTIO_NET_TCP_HDR_LENGTH 0xF000
/* IPv4 max payload, 16 bits in the header */
#define VIRTIO_NET_MAX_IP4_PAYLOAD (65535 - sizeof(struct ip_header))
#define VIRTIO_NET_MAX_TCP_PAYLOAD 65535
/* header length value in ip header without option */
#define VIRTIO_NET_IP4_HEADER_LENGTH 5
#define VIRTIO_NET_IP6_ADDR_SIZE 32 /* ipv6 saddr + daddr */
#define VIRTIO_NET_MAX_IP6_PAYLOAD VIRTIO_NET_MAX_TCP_PAYLOAD
/* Purge coalesced packets timer interval, This value affects the performance
a lot, and should be tuned carefully, '300000'(300us) is the recommended
value to pass the WHQL test, '50000' can gain 2x netperf throughput with
tso/gso/gro 'off'. */
#define VIRTIO_NET_RSC_DEFAULT_INTERVAL 300000
#define VIRTIO_NET_RSS_SUPPORTED_HASHES (VIRTIO_NET_RSS_HASH_TYPE_IPv4 | \
VIRTIO_NET_RSS_HASH_TYPE_TCPv4 | \
VIRTIO_NET_RSS_HASH_TYPE_UDPv4 | \
VIRTIO_NET_RSS_HASH_TYPE_IPv6 | \
VIRTIO_NET_RSS_HASH_TYPE_TCPv6 | \
VIRTIO_NET_RSS_HASH_TYPE_UDPv6 | \
VIRTIO_NET_RSS_HASH_TYPE_IP_EX | \
VIRTIO_NET_RSS_HASH_TYPE_TCP_EX | \
VIRTIO_NET_RSS_HASH_TYPE_UDP_EX)
static const VirtIOFeature feature_sizes[] = {
{.flags = 1ULL << VIRTIO_NET_F_MAC,
.end = endof(struct virtio_net_config, mac)},
{.flags = 1ULL << VIRTIO_NET_F_STATUS,
.end = endof(struct virtio_net_config, status)},
{.flags = 1ULL << VIRTIO_NET_F_MQ,
.end = endof(struct virtio_net_config, max_virtqueue_pairs)},
{.flags = 1ULL << VIRTIO_NET_F_MTU,
.end = endof(struct virtio_net_config, mtu)},
{.flags = 1ULL << VIRTIO_NET_F_SPEED_DUPLEX,
.end = endof(struct virtio_net_config, duplex)},
{.flags = (1ULL << VIRTIO_NET_F_RSS) | (1ULL << VIRTIO_NET_F_HASH_REPORT),
.end = endof(struct virtio_net_config, supported_hash_types)},
{}
};
virtio: introduce VirtIOConfigSizeParams & virtio_get_config_size This is the first step towards moving all device config size calculation logic into the virtio core code. In particular, this adds a struct that contains all the necessary information for common virtio code to be able to calculate the final config size for a device. This is expected to be used with the new virtio_get_config_size helper, which calculates the final length based on the provided host features. This builds on top of already existing code like VirtIOFeature and virtio_feature_get_config_size(), but adds additional fields, as well as sanity checking so that device-specifc code doesn't have to duplicate it. An example usage would be: static const VirtIOFeature dev_features[] = { {.flags = 1ULL << FEATURE_1_BIT, .end = endof(struct virtio_dev_config, feature_1)}, {.flags = 1ULL << FEATURE_2_BIT, .end = endof(struct virtio_dev_config, feature_2)}, {} }; static const VirtIOConfigSizeParams dev_cfg_size_params = { .min_size = DEV_BASE_CONFIG_SIZE, .max_size = sizeof(struct virtio_dev_config), .feature_sizes = dev_features }; // code inside my_dev_device_realize() size_t config_size = virtio_get_config_size(&dev_cfg_size_params, host_features); virtio_init(vdev, VIRTIO_ID_MYDEV, config_size); Currently every device is expected to write its own boilerplate from the example above in device_realize(), however, the next step of this transition is moving VirtIOConfigSizeParams into VirtioDeviceClass, so that it can be done automatically by the virtio initialization code. All of the users of virtio_feature_get_config_size have been converted to use virtio_get_config_size so it's no longer needed and is removed with this commit. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-09-06 10:31:07 +03:00
static const VirtIOConfigSizeParams cfg_size_params = {
.min_size = endof(struct virtio_net_config, mac),
.max_size = sizeof(struct virtio_net_config),
.feature_sizes = feature_sizes
};
static VirtIONetQueue *virtio_net_get_subqueue(NetClientState *nc)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
return &n->vqs[nc->queue_index];
}
static int vq2q(int queue_index)
{
return queue_index / 2;
}
static void flush_or_purge_queued_packets(NetClientState *nc)
{
if (!nc->peer) {
return;
}
qemu_flush_or_purge_queued_packets(nc->peer, true);
assert(!virtio_net_get_subqueue(nc)->async_tx.elem);
}
/* TODO
* - we could suppress RX interrupt if we were so inclined.
*/
static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config)
{
VirtIONet *n = VIRTIO_NET(vdev);
struct virtio_net_config netcfg;
NetClientState *nc = qemu_get_queue(n->nic);
static const MACAddr zero = { .a = { 0, 0, 0, 0, 0, 0 } };
int ret = 0;
memset(&netcfg, 0 , sizeof(struct virtio_net_config));
virtio_stw_p(vdev, &netcfg.status, n->status);
virtio_stw_p(vdev, &netcfg.max_virtqueue_pairs, n->max_queue_pairs);
virtio_stw_p(vdev, &netcfg.mtu, n->net_conf.mtu);
memcpy(netcfg.mac, n->mac, ETH_ALEN);
virtio_stl_p(vdev, &netcfg.speed, n->net_conf.speed);
netcfg.duplex = n->net_conf.duplex;
netcfg.rss_max_key_size = VIRTIO_NET_RSS_MAX_KEY_SIZE;
virtio_stw_p(vdev, &netcfg.rss_max_indirection_table_length,
virtio_host_has_feature(vdev, VIRTIO_NET_F_RSS) ?
VIRTIO_NET_RSS_MAX_TABLE_LEN : 1);
virtio_stl_p(vdev, &netcfg.supported_hash_types,
VIRTIO_NET_RSS_SUPPORTED_HASHES);
memcpy(config, &netcfg, n->config_size);
/*
* Is this VDPA? No peer means not VDPA: there's no way to
* disconnect/reconnect a VDPA peer.
*/
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg,
n->config_size);
if (ret == -1) {
return;
}
/*
* Some NIC/kernel combinations present 0 as the mac address. As that
* is not a legal address, try to proceed with the address from the
* QEMU command line in the hope that the address has been configured
* correctly elsewhere - just not reported by the device.
*/
if (memcmp(&netcfg.mac, &zero, sizeof(zero)) == 0) {
info_report("Zero hardware mac address detected. Ignoring.");
memcpy(netcfg.mac, n->mac, ETH_ALEN);
}
netcfg.status |= virtio_tswap16(vdev,
n->status & VIRTIO_NET_S_ANNOUNCE);
memcpy(config, &netcfg, n->config_size);
}
}
static void virtio_net_set_config(VirtIODevice *vdev, const uint8_t *config)
{
VirtIONet *n = VIRTIO_NET(vdev);
struct virtio_net_config netcfg = {};
NetClientState *nc = qemu_get_queue(n->nic);
memcpy(&netcfg, config, n->config_size);
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR) &&
!virtio_vdev_has_feature(vdev, VIRTIO_F_VERSION_1) &&
memcmp(netcfg.mac, n->mac, ETH_ALEN)) {
memcpy(n->mac, netcfg.mac, ETH_ALEN);
qemu_format_nic_info_str(qemu_get_queue(n->nic), n->mac);
}
/*
* Is this VDPA? No peer means not VDPA: there's no way to
* disconnect/reconnect a VDPA peer.
*/
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
vhost_net_set_config(get_vhost_net(nc->peer),
(uint8_t *)&netcfg, 0, n->config_size,
VHOST_SET_CONFIG_TYPE_MASTER);
}
}
static bool virtio_net_started(VirtIONet *n, uint8_t status)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
return (status & VIRTIO_CONFIG_S_DRIVER_OK) &&
(n->status & VIRTIO_NET_S_LINK_UP) && vdev->vm_running;
}
static void virtio_net_announce_notify(VirtIONet *net)
{
VirtIODevice *vdev = VIRTIO_DEVICE(net);
trace_virtio_net_announce_notify();
net->status |= VIRTIO_NET_S_ANNOUNCE;
virtio_notify_config(vdev);
}
static void virtio_net_announce_timer(void *opaque)
{
VirtIONet *n = opaque;
trace_virtio_net_announce_timer(n->announce_timer.round);
n->announce_timer.round--;
virtio_net_announce_notify(n);
}
static void virtio_net_announce(NetClientState *nc)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
VirtIODevice *vdev = VIRTIO_DEVICE(n);
/*
* Make sure the virtio migration announcement timer isn't running
* If it is, let it trigger announcement so that we do not cause
* confusion.
*/
if (n->announce_timer.round) {
return;
}
if (virtio_vdev_has_feature(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE) &&
virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ)) {
virtio_net_announce_notify(n);
}
}
static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
NetClientState *nc = qemu_get_queue(n->nic);
int queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
int cvq = virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) ?
n->max_ncs - n->max_queue_pairs : 0;
if (!get_vhost_net(nc->peer)) {
return;
}
if ((virtio_net_started(n, status) && !nc->peer->link_down) ==
!!n->vhost_started) {
return;
}
if (!n->vhost_started) {
int r, i;
if (n->needs_vnet_hdr_swap) {
error_report("backend does not support %s vnet headers; "
"falling back on userspace virtio",
virtio_is_big_endian(vdev) ? "BE" : "LE");
return;
}
/* Any packets outstanding? Purge them to avoid touching rings
* when vhost is running.
*/
for (i = 0; i < queue_pairs; i++) {
NetClientState *qnc = qemu_get_subqueue(n->nic, i);
/* Purge both directions: TX and RX. */
qemu_net_queue_purge(qnc->peer->incoming_queue, qnc);
qemu_net_queue_purge(qnc->incoming_queue, qnc->peer);
}
if (virtio_has_feature(vdev->guest_features, VIRTIO_NET_F_MTU)) {
r = vhost_net_set_mtu(get_vhost_net(nc->peer), n->net_conf.mtu);
if (r < 0) {
error_report("%uBytes MTU not supported by the backend",
n->net_conf.mtu);
return;
}
}
n->vhost_started = 1;
r = vhost_net_start(vdev, n->nic->ncs, queue_pairs, cvq);
if (r < 0) {
error_report("unable to start vhost net: %d: "
"falling back on userspace virtio", -r);
n->vhost_started = 0;
}
} else {
vhost_net_stop(vdev, n->nic->ncs, queue_pairs, cvq);
n->vhost_started = 0;
}
}
static int virtio_net_set_vnet_endian_one(VirtIODevice *vdev,
NetClientState *peer,
bool enable)
{
if (virtio_is_big_endian(vdev)) {
return qemu_set_vnet_be(peer, enable);
} else {
return qemu_set_vnet_le(peer, enable);
}
}
static bool virtio_net_set_vnet_endian(VirtIODevice *vdev, NetClientState *ncs,
int queue_pairs, bool enable)
{
int i;
for (i = 0; i < queue_pairs; i++) {
if (virtio_net_set_vnet_endian_one(vdev, ncs[i].peer, enable) < 0 &&
enable) {
while (--i >= 0) {
virtio_net_set_vnet_endian_one(vdev, ncs[i].peer, false);
}
return true;
}
}
return false;
}
static void virtio_net_vnet_endian_status(VirtIONet *n, uint8_t status)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
if (virtio_net_started(n, status)) {
/* Before using the device, we tell the network backend about the
* endianness to use when parsing vnet headers. If the backend
* can't do it, we fallback onto fixing the headers in the core
* virtio-net code.
*/
n->needs_vnet_hdr_swap = virtio_net_set_vnet_endian(vdev, n->nic->ncs,
queue_pairs, true);
} else if (virtio_net_started(n, vdev->status)) {
/* After using the device, we need to reset the network backend to
* the default (guest native endianness), otherwise the guest may
* lose network connectivity if it is rebooted into a different
* endianness.
*/
virtio_net_set_vnet_endian(vdev, n->nic->ncs, queue_pairs, false);
}
}
static void virtio_net_drop_tx_queue_data(VirtIODevice *vdev, VirtQueue *vq)
{
unsigned int dropped = virtqueue_drop_all(vq);
if (dropped) {
virtio_notify(vdev, vq);
}
}
static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
{
VirtIONet *n = VIRTIO_NET(vdev);
VirtIONetQueue *q;
int i;
uint8_t queue_status;
virtio_net_vnet_endian_status(n, status);
virtio_net_vhost_status(n, status);
for (i = 0; i < n->max_queue_pairs; i++) {
NetClientState *ncs = qemu_get_subqueue(n->nic, i);
bool queue_started;
q = &n->vqs[i];
if ((!n->multiqueue && i != 0) || i >= n->curr_queue_pairs) {
queue_status = 0;
} else {
queue_status = status;
}
queue_started =
virtio_net_started(n, queue_status) && !n->vhost_started;
if (queue_started) {
qemu_flush_queued_packets(ncs);
}
if (!q->tx_waiting) {
continue;
}
if (queue_started) {
if (q->tx_timer) {
timer_mod(q->tx_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + n->tx_timeout);
} else {
qemu_bh_schedule(q->tx_bh);
}
} else {
if (q->tx_timer) {
timer_del(q->tx_timer);
} else {
qemu_bh_cancel(q->tx_bh);
}
if ((n->status & VIRTIO_NET_S_LINK_UP) == 0 &&
(queue_status & VIRTIO_CONFIG_S_DRIVER_OK) &&
vdev->vm_running) {
/* if tx is waiting we are likely have some packets in tx queue
* and disabled notification */
q->tx_waiting = 0;
virtio_queue_set_notification(q->tx_vq, 1);
virtio_net_drop_tx_queue_data(vdev, q->tx_vq);
}
}
}
}
static void virtio_net_set_link_status(NetClientState *nc)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
VirtIODevice *vdev = VIRTIO_DEVICE(n);
uint16_t old_status = n->status;
if (nc->link_down)
n->status &= ~VIRTIO_NET_S_LINK_UP;
else
n->status |= VIRTIO_NET_S_LINK_UP;
if (n->status != old_status)
virtio_notify_config(vdev);
virtio_net_set_status(vdev, vdev->status);
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
static void rxfilter_notify(NetClientState *nc)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
if (nc->rxfilter_notify_enabled) {
char *path = object_get_canonical_path(OBJECT(n->qdev));
qapi_event_send_nic_rx_filter_changed(n->netclient_name, path);
g_free(path);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
/* disable event notification to avoid events flooding */
nc->rxfilter_notify_enabled = 0;
}
}
static intList *get_vlan_table(VirtIONet *n)
{
intList *list;
int i, j;
list = NULL;
for (i = 0; i < MAX_VLAN >> 5; i++) {
for (j = 0; n->vlans[i] && j <= 0x1f; j++) {
if (n->vlans[i] & (1U << j)) {
QAPI_LIST_PREPEND(list, (i << 5) + j);
}
}
}
return list;
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
static RxFilterInfo *virtio_net_query_rxfilter(NetClientState *nc)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
VirtIODevice *vdev = VIRTIO_DEVICE(n);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
RxFilterInfo *info;
strList *str_list;
int i;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
info = g_malloc0(sizeof(*info));
info->name = g_strdup(nc->name);
info->promiscuous = n->promisc;
if (n->nouni) {
info->unicast = RX_STATE_NONE;
} else if (n->alluni) {
info->unicast = RX_STATE_ALL;
} else {
info->unicast = RX_STATE_NORMAL;
}
if (n->nomulti) {
info->multicast = RX_STATE_NONE;
} else if (n->allmulti) {
info->multicast = RX_STATE_ALL;
} else {
info->multicast = RX_STATE_NORMAL;
}
info->broadcast_allowed = n->nobcast;
info->multicast_overflow = n->mac_table.multi_overflow;
info->unicast_overflow = n->mac_table.uni_overflow;
info->main_mac = qemu_mac_strdup_printf(n->mac);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
str_list = NULL;
for (i = 0; i < n->mac_table.first_multi; i++) {
QAPI_LIST_PREPEND(str_list,
qemu_mac_strdup_printf(n->mac_table.macs + i * ETH_ALEN));
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
info->unicast_table = str_list;
str_list = NULL;
for (i = n->mac_table.first_multi; i < n->mac_table.in_use; i++) {
QAPI_LIST_PREPEND(str_list,
qemu_mac_strdup_printf(n->mac_table.macs + i * ETH_ALEN));
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
info->multicast_table = str_list;
info->vlan_table = get_vlan_table(n);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VLAN)) {
info->vlan = RX_STATE_ALL;
} else if (!info->vlan_table) {
info->vlan = RX_STATE_NONE;
} else {
info->vlan = RX_STATE_NORMAL;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
/* enable event notification after query */
nc->rxfilter_notify_enabled = 1;
return info;
}
static void virtio_net_queue_reset(VirtIODevice *vdev, uint32_t queue_index)
{
VirtIONet *n = VIRTIO_NET(vdev);
virtio-net: fix for heap-buffer-overflow Run shell script: cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \ 512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \ user,id=net0 -qtest stdio outl 0xcf8 0x80000810 outl 0xcfc 0xc000 outl 0xcf8 0x80000804 outl 0xcfc 0x01 outl 0xc00d 0x0200 outl 0xcf8 0x80000890 outb 0xcfc 0x4 outl 0xcf8 0x80000889 outl 0xcfc 0x1c000000 outl 0xcf8 0x80000893 outw 0xcfc 0x100 EOF Got: ==68666== Invalid read of size 8 ==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820) ==68666== by 0x6EBFBF: flatview_write (physmem.c:2862) ==68666== by 0x6EF5E7: address_space_write (physmem.c:2958) ==68666== by 0x6DFDEC: cpu_outw (ioport.c:70) ==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480) ==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client" That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309 Here, the queue_index is the index of the cvq, but in some cases cvq does not have the corresponding NetClientState, so overflow appears. I add a check here, ignore illegal queue_index and cvq queue_index. Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal than cvq index could hit this. Other devices are similar. Fixes: 7f863302 ("virtio-net: support queue_enable") Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309 Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-10 12:57:39 +03:00
NetClientState *nc;
/* validate queue_index and skip for cvq */
if (queue_index >= n->max_queue_pairs * 2) {
return;
}
nc = qemu_get_subqueue(n->nic, vq2q(queue_index));
if (!nc->peer) {
return;
}
if (get_vhost_net(nc->peer) &&
nc->peer->info->type == NET_CLIENT_DRIVER_TAP) {
vhost_net_virtqueue_reset(vdev, nc, queue_index);
}
flush_or_purge_queued_packets(nc);
}
static void virtio_net_queue_enable(VirtIODevice *vdev, uint32_t queue_index)
{
VirtIONet *n = VIRTIO_NET(vdev);
virtio-net: fix for heap-buffer-overflow Run shell script: cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \ 512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \ user,id=net0 -qtest stdio outl 0xcf8 0x80000810 outl 0xcfc 0xc000 outl 0xcf8 0x80000804 outl 0xcfc 0x01 outl 0xc00d 0x0200 outl 0xcf8 0x80000890 outb 0xcfc 0x4 outl 0xcf8 0x80000889 outl 0xcfc 0x1c000000 outl 0xcf8 0x80000893 outw 0xcfc 0x100 EOF Got: ==68666== Invalid read of size 8 ==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820) ==68666== by 0x6EBFBF: flatview_write (physmem.c:2862) ==68666== by 0x6EF5E7: address_space_write (physmem.c:2958) ==68666== by 0x6DFDEC: cpu_outw (ioport.c:70) ==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480) ==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client" That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309 Here, the queue_index is the index of the cvq, but in some cases cvq does not have the corresponding NetClientState, so overflow appears. I add a check here, ignore illegal queue_index and cvq queue_index. Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal than cvq index could hit this. Other devices are similar. Fixes: 7f863302 ("virtio-net: support queue_enable") Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309 Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-10 12:57:39 +03:00
NetClientState *nc;
int r;
virtio-net: fix for heap-buffer-overflow Run shell script: cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \ 512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \ user,id=net0 -qtest stdio outl 0xcf8 0x80000810 outl 0xcfc 0xc000 outl 0xcf8 0x80000804 outl 0xcfc 0x01 outl 0xc00d 0x0200 outl 0xcf8 0x80000890 outb 0xcfc 0x4 outl 0xcf8 0x80000889 outl 0xcfc 0x1c000000 outl 0xcf8 0x80000893 outw 0xcfc 0x100 EOF Got: ==68666== Invalid read of size 8 ==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820) ==68666== by 0x6EBFBF: flatview_write (physmem.c:2862) ==68666== by 0x6EF5E7: address_space_write (physmem.c:2958) ==68666== by 0x6DFDEC: cpu_outw (ioport.c:70) ==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480) ==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client" That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309 Here, the queue_index is the index of the cvq, but in some cases cvq does not have the corresponding NetClientState, so overflow appears. I add a check here, ignore illegal queue_index and cvq queue_index. Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal than cvq index could hit this. Other devices are similar. Fixes: 7f863302 ("virtio-net: support queue_enable") Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309 Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-10 12:57:39 +03:00
/* validate queue_index and skip for cvq */
if (queue_index >= n->max_queue_pairs * 2) {
return;
}
nc = qemu_get_subqueue(n->nic, vq2q(queue_index));
if (!nc->peer || !vdev->vhost_started) {
return;
}
if (get_vhost_net(nc->peer) &&
nc->peer->info->type == NET_CLIENT_DRIVER_TAP) {
r = vhost_net_virtqueue_restart(vdev, nc, queue_index);
if (r < 0) {
error_report("unable to restart vhost net virtqueue: %d, "
"when resetting the queue", queue_index);
}
}
}
static void virtio_net_reset(VirtIODevice *vdev)
{
VirtIONet *n = VIRTIO_NET(vdev);
int i;
/* Reset back to compatibility mode */
n->promisc = 1;
n->allmulti = 0;
n->alluni = 0;
n->nomulti = 0;
n->nouni = 0;
n->nobcast = 0;
/* multiqueue is disabled by default */
n->curr_queue_pairs = 1;
timer_del(n->announce_timer.tm);
n->announce_timer.round = 0;
n->status &= ~VIRTIO_NET_S_ANNOUNCE;
/* Flush any MAC and VLAN filter table state */
n->mac_table.in_use = 0;
n->mac_table.first_multi = 0;
n->mac_table.multi_overflow = 0;
n->mac_table.uni_overflow = 0;
memset(n->mac_table.macs, 0, MAC_TABLE_ENTRIES * ETH_ALEN);
memcpy(&n->mac[0], &n->nic->conf->macaddr, sizeof(n->mac));
qemu_format_nic_info_str(qemu_get_queue(n->nic), n->mac);
memset(n->vlans, 0, MAX_VLAN >> 3);
/* Flush any async TX */
for (i = 0; i < n->max_queue_pairs; i++) {
flush_or_purge_queued_packets(qemu_get_subqueue(n->nic, i));
}
}
static void peer_test_vnet_hdr(VirtIONet *n)
{
NetClientState *nc = qemu_get_queue(n->nic);
if (!nc->peer) {
return;
}
n->has_vnet_hdr = qemu_has_vnet_hdr(nc->peer);
}
static int peer_has_vnet_hdr(VirtIONet *n)
{
return n->has_vnet_hdr;
}
static int peer_has_ufo(VirtIONet *n)
{
if (!peer_has_vnet_hdr(n))
return 0;
n->has_ufo = qemu_has_ufo(qemu_get_queue(n->nic)->peer);
return n->has_ufo;
}
static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
int version_1, int hash_report)
{
int i;
NetClientState *nc;
n->mergeable_rx_bufs = mergeable_rx_bufs;
if (version_1) {
n->guest_hdr_len = hash_report ?
sizeof(struct virtio_net_hdr_v1_hash) :
sizeof(struct virtio_net_hdr_mrg_rxbuf);
n->rss_data.populate_hash = !!hash_report;
} else {
n->guest_hdr_len = n->mergeable_rx_bufs ?
sizeof(struct virtio_net_hdr_mrg_rxbuf) :
sizeof(struct virtio_net_hdr);
}
for (i = 0; i < n->max_queue_pairs; i++) {
nc = qemu_get_subqueue(n->nic, i);
if (peer_has_vnet_hdr(n) &&
qemu_has_vnet_hdr_len(nc->peer, n->guest_hdr_len)) {
qemu_set_vnet_hdr_len(nc->peer, n->guest_hdr_len);
n->host_hdr_len = n->guest_hdr_len;
}
}
}
static int virtio_net_max_tx_queue_size(VirtIONet *n)
{
NetClientState *peer = n->nic_conf.peers.ncs[0];
/*
* Backends other than vhost-user or vhost-vdpa don't support max queue
* size.
*/
if (!peer) {
return VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE;
}
switch(peer->info->type) {
case NET_CLIENT_DRIVER_VHOST_USER:
case NET_CLIENT_DRIVER_VHOST_VDPA:
return VIRTQUEUE_MAX_SIZE;
default:
return VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE;
};
}
static int peer_attach(VirtIONet *n, int index)
{
NetClientState *nc = qemu_get_subqueue(n->nic, index);
if (!nc->peer) {
return 0;
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) {
vhost_set_vring_enable(nc->peer, 1);
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer->info->type != NET_CLIENT_DRIVER_TAP) {
return 0;
}
if (n->max_queue_pairs == 1) {
return 0;
}
return tap_enable(nc->peer);
}
static int peer_detach(VirtIONet *n, int index)
{
NetClientState *nc = qemu_get_subqueue(n->nic, index);
if (!nc->peer) {
return 0;
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) {
vhost_set_vring_enable(nc->peer, 0);
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer->info->type != NET_CLIENT_DRIVER_TAP) {
return 0;
}
return tap_disable(nc->peer);
}
static void virtio_net_set_queue_pairs(VirtIONet *n)
{
int i;
int r;
if (n->nic->peer_deleted) {
return;
}
for (i = 0; i < n->max_queue_pairs; i++) {
if (i < n->curr_queue_pairs) {
r = peer_attach(n, i);
assert(!r);
} else {
r = peer_detach(n, i);
assert(!r);
}
}
}
static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue);
static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features,
Error **errp)
{
VirtIONet *n = VIRTIO_NET(vdev);
NetClientState *nc = qemu_get_queue(n->nic);
/* Firstly sync all virtio-net possible supported features */
features |= n->host_features;
virtio_add_feature(&features, VIRTIO_NET_F_MAC);
if (!peer_has_vnet_hdr(n)) {
virtio_clear_feature(&features, VIRTIO_NET_F_CSUM);
virtio_clear_feature(&features, VIRTIO_NET_F_HOST_TSO4);
virtio_clear_feature(&features, VIRTIO_NET_F_HOST_TSO6);
virtio_clear_feature(&features, VIRTIO_NET_F_HOST_ECN);
virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_CSUM);
virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_TSO4);
virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_TSO6);
virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ECN);
virtio_clear_feature(&features, VIRTIO_NET_F_HASH_REPORT);
}
if (!peer_has_vnet_hdr(n) || !peer_has_ufo(n)) {
virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_UFO);
virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
}
if (!get_vhost_net(nc->peer)) {
virtio_add_feature(&features, VIRTIO_F_RING_RESET);
return features;
}
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
if (!ebpf_rss_is_loaded(&n->ebpf_rss)) {
virtio_clear_feature(&features, VIRTIO_NET_F_RSS);
}
features = vhost_net_get_features(get_vhost_net(nc->peer), features);
vdev->backend_features = features;
if (n->mtu_bypass_backend &&
(n->host_features & 1ULL << VIRTIO_NET_F_MTU)) {
features |= (1ULL << VIRTIO_NET_F_MTU);
}
/*
* Since GUEST_ANNOUNCE is emulated the feature bit could be set without
* enabled. This happens in the vDPA case.
*
* Make sure the feature set is not incoherent, as the driver could refuse
* to start.
*
* TODO: QEMU is able to emulate a CVQ just for guest_announce purposes,
* helping guest to notify the new location with vDPA devices that does not
* support it.
*/
if (!virtio_has_feature(vdev->backend_features, VIRTIO_NET_F_CTRL_VQ)) {
virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
}
return features;
}
static uint64_t virtio_net_bad_features(VirtIODevice *vdev)
{
uint64_t features = 0;
/* Linux kernel 2.6.25. It understood MAC (as everyone must),
* but also these: */
virtio_add_feature(&features, VIRTIO_NET_F_MAC);
virtio_add_feature(&features, VIRTIO_NET_F_CSUM);
virtio_add_feature(&features, VIRTIO_NET_F_HOST_TSO4);
virtio_add_feature(&features, VIRTIO_NET_F_HOST_TSO6);
virtio_add_feature(&features, VIRTIO_NET_F_HOST_ECN);
return features;
}
static void virtio_net_apply_guest_offloads(VirtIONet *n)
{
qemu_set_offload(qemu_get_queue(n->nic)->peer,
!!(n->curr_guest_offloads & (1ULL << VIRTIO_NET_F_GUEST_CSUM)),
!!(n->curr_guest_offloads & (1ULL << VIRTIO_NET_F_GUEST_TSO4)),
!!(n->curr_guest_offloads & (1ULL << VIRTIO_NET_F_GUEST_TSO6)),
!!(n->curr_guest_offloads & (1ULL << VIRTIO_NET_F_GUEST_ECN)),
!!(n->curr_guest_offloads & (1ULL << VIRTIO_NET_F_GUEST_UFO)));
}
static uint64_t virtio_net_guest_offloads_by_features(uint32_t features)
{
static const uint64_t guest_offloads_mask =
(1ULL << VIRTIO_NET_F_GUEST_CSUM) |
(1ULL << VIRTIO_NET_F_GUEST_TSO4) |
(1ULL << VIRTIO_NET_F_GUEST_TSO6) |
(1ULL << VIRTIO_NET_F_GUEST_ECN) |
(1ULL << VIRTIO_NET_F_GUEST_UFO);
return guest_offloads_mask & features;
}
static inline uint64_t virtio_net_supported_guest_offloads(VirtIONet *n)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
return virtio_net_guest_offloads_by_features(vdev->guest_features);
}
typedef struct {
VirtIONet *n;
DeviceState *dev;
} FailoverDevice;
/**
* Set the failover primary device
*
* @opaque: FailoverId to setup
* @opts: opts for device we are handling
* @errp: returns an error if this function fails
*/
static int failover_set_primary(DeviceState *dev, void *opaque)
{
FailoverDevice *fdev = opaque;
PCIDevice *pci_dev = (PCIDevice *)
object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE);
if (!pci_dev) {
return 0;
}
if (!g_strcmp0(pci_dev->failover_pair_id, fdev->n->netclient_name)) {
fdev->dev = dev;
return 1;
}
return 0;
}
/**
* Find the primary device for this failover virtio-net
*
* @n: VirtIONet device
* @errp: returns an error if this function fails
*/
static DeviceState *failover_find_primary_device(VirtIONet *n)
{
FailoverDevice fdev = {
.n = n,
};
qbus_walk_children(sysbus_get_default(), failover_set_primary, NULL,
NULL, NULL, &fdev);
return fdev.dev;
}
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
static void failover_add_primary(VirtIONet *n, Error **errp)
{
Error *err = NULL;
DeviceState *dev = failover_find_primary_device(n);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (dev) {
return;
}
if (!n->primary_opts) {
error_setg(errp, "Primary device not found");
error_append_hint(errp, "Virtio-net failover will not work. Make "
"sure primary device has parameter"
" failover_pair_id=%s\n", n->netclient_name);
return;
}
dev = qdev_device_add_from_qdict(n->primary_opts,
n->primary_opts_from_json,
&err);
if (err) {
qobject_unref(n->primary_opts);
n->primary_opts = NULL;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
} else {
object_unref(OBJECT(dev));
}
error_propagate(errp, err);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
static void virtio_net_set_features(VirtIODevice *vdev, uint64_t features)
{
VirtIONet *n = VIRTIO_NET(vdev);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
Error *err = NULL;
int i;
if (n->mtu_bypass_backend &&
!virtio_has_feature(vdev->backend_features, VIRTIO_NET_F_MTU)) {
features &= ~(1ULL << VIRTIO_NET_F_MTU);
}
virtio_net_set_multiqueue(n,
virtio_has_feature(features, VIRTIO_NET_F_RSS) ||
virtio_has_feature(features, VIRTIO_NET_F_MQ));
virtio_net_set_mrg_rx_bufs(n,
virtio_has_feature(features,
VIRTIO_NET_F_MRG_RXBUF),
virtio_has_feature(features,
VIRTIO_F_VERSION_1),
virtio_has_feature(features,
VIRTIO_NET_F_HASH_REPORT));
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
n->rsc4_enabled = virtio_has_feature(features, VIRTIO_NET_F_RSC_EXT) &&
virtio_has_feature(features, VIRTIO_NET_F_GUEST_TSO4);
n->rsc6_enabled = virtio_has_feature(features, VIRTIO_NET_F_RSC_EXT) &&
virtio_has_feature(features, VIRTIO_NET_F_GUEST_TSO6);
n->rss_data.redirect = virtio_has_feature(features, VIRTIO_NET_F_RSS);
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
if (n->has_vnet_hdr) {
n->curr_guest_offloads =
virtio_net_guest_offloads_by_features(features);
virtio_net_apply_guest_offloads(n);
}
for (i = 0; i < n->max_queue_pairs; i++) {
NetClientState *nc = qemu_get_subqueue(n->nic, i);
if (!get_vhost_net(nc->peer)) {
continue;
}
vhost_net_ack_features(get_vhost_net(nc->peer), features);
/*
* keep acked_features in NetVhostUserState up-to-date so it
* can't miss any features configured by guest virtio driver.
*/
vhost_net_save_acked_features(nc->peer);
}
if (virtio_has_feature(features, VIRTIO_NET_F_CTRL_VLAN)) {
memset(n->vlans, 0, MAX_VLAN >> 3);
} else {
memset(n->vlans, 0xff, MAX_VLAN >> 3);
}
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY)) {
qapi_event_send_failover_negotiated(n->netclient_name);
qatomic_set(&n->failover_primary_hidden, false);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
failover_add_primary(n, &err);
if (err) {
if (!qtest_enabled()) {
warn_report_err(err);
} else {
error_free(err);
}
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
}
}
static int virtio_net_handle_rx_mode(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
uint8_t on;
size_t s;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
NetClientState *nc = qemu_get_queue(n->nic);
s = iov_to_buf(iov, iov_cnt, 0, &on, sizeof(on));
if (s != sizeof(on)) {
return VIRTIO_NET_ERR;
}
if (cmd == VIRTIO_NET_CTRL_RX_PROMISC) {
n->promisc = on;
} else if (cmd == VIRTIO_NET_CTRL_RX_ALLMULTI) {
n->allmulti = on;
} else if (cmd == VIRTIO_NET_CTRL_RX_ALLUNI) {
n->alluni = on;
} else if (cmd == VIRTIO_NET_CTRL_RX_NOMULTI) {
n->nomulti = on;
} else if (cmd == VIRTIO_NET_CTRL_RX_NOUNI) {
n->nouni = on;
} else if (cmd == VIRTIO_NET_CTRL_RX_NOBCAST) {
n->nobcast = on;
} else {
return VIRTIO_NET_ERR;
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
rxfilter_notify(nc);
return VIRTIO_NET_OK;
}
static int virtio_net_handle_offloads(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
uint64_t offloads;
size_t s;
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
return VIRTIO_NET_ERR;
}
s = iov_to_buf(iov, iov_cnt, 0, &offloads, sizeof(offloads));
if (s != sizeof(offloads)) {
return VIRTIO_NET_ERR;
}
if (cmd == VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET) {
uint64_t supported_offloads;
offloads = virtio_ldq_p(vdev, &offloads);
if (!n->has_vnet_hdr) {
return VIRTIO_NET_ERR;
}
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
n->rsc4_enabled = virtio_has_feature(offloads, VIRTIO_NET_F_RSC_EXT) &&
virtio_has_feature(offloads, VIRTIO_NET_F_GUEST_TSO4);
n->rsc6_enabled = virtio_has_feature(offloads, VIRTIO_NET_F_RSC_EXT) &&
virtio_has_feature(offloads, VIRTIO_NET_F_GUEST_TSO6);
virtio_clear_feature(&offloads, VIRTIO_NET_F_RSC_EXT);
supported_offloads = virtio_net_supported_guest_offloads(n);
if (offloads & ~supported_offloads) {
return VIRTIO_NET_ERR;
}
n->curr_guest_offloads = offloads;
virtio_net_apply_guest_offloads(n);
return VIRTIO_NET_OK;
} else {
return VIRTIO_NET_ERR;
}
}
static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
struct virtio_net_ctrl_mac mac_data;
size_t s;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
NetClientState *nc = qemu_get_queue(n->nic);
if (cmd == VIRTIO_NET_CTRL_MAC_ADDR_SET) {
if (iov_size(iov, iov_cnt) != sizeof(n->mac)) {
return VIRTIO_NET_ERR;
}
s = iov_to_buf(iov, iov_cnt, 0, &n->mac, sizeof(n->mac));
assert(s == sizeof(n->mac));
qemu_format_nic_info_str(qemu_get_queue(n->nic), n->mac);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
rxfilter_notify(nc);
return VIRTIO_NET_OK;
}
if (cmd != VIRTIO_NET_CTRL_MAC_TABLE_SET) {
return VIRTIO_NET_ERR;
}
int in_use = 0;
int first_multi = 0;
uint8_t uni_overflow = 0;
uint8_t multi_overflow = 0;
uint8_t *macs = g_malloc0(MAC_TABLE_ENTRIES * ETH_ALEN);
s = iov_to_buf(iov, iov_cnt, 0, &mac_data.entries,
sizeof(mac_data.entries));
mac_data.entries = virtio_ldl_p(vdev, &mac_data.entries);
if (s != sizeof(mac_data.entries)) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
goto error;
}
iov_discard_front(&iov, &iov_cnt, s);
if (mac_data.entries * ETH_ALEN > iov_size(iov, iov_cnt)) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
goto error;
}
if (mac_data.entries <= MAC_TABLE_ENTRIES) {
s = iov_to_buf(iov, iov_cnt, 0, macs,
mac_data.entries * ETH_ALEN);
if (s != mac_data.entries * ETH_ALEN) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
goto error;
}
in_use += mac_data.entries;
} else {
uni_overflow = 1;
}
iov_discard_front(&iov, &iov_cnt, mac_data.entries * ETH_ALEN);
first_multi = in_use;
s = iov_to_buf(iov, iov_cnt, 0, &mac_data.entries,
sizeof(mac_data.entries));
mac_data.entries = virtio_ldl_p(vdev, &mac_data.entries);
if (s != sizeof(mac_data.entries)) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
goto error;
}
iov_discard_front(&iov, &iov_cnt, s);
if (mac_data.entries * ETH_ALEN != iov_size(iov, iov_cnt)) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
goto error;
}
if (mac_data.entries <= MAC_TABLE_ENTRIES - in_use) {
s = iov_to_buf(iov, iov_cnt, 0, &macs[in_use * ETH_ALEN],
mac_data.entries * ETH_ALEN);
if (s != mac_data.entries * ETH_ALEN) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
goto error;
}
in_use += mac_data.entries;
} else {
multi_overflow = 1;
}
n->mac_table.in_use = in_use;
n->mac_table.first_multi = first_multi;
n->mac_table.uni_overflow = uni_overflow;
n->mac_table.multi_overflow = multi_overflow;
memcpy(n->mac_table.macs, macs, MAC_TABLE_ENTRIES * ETH_ALEN);
g_free(macs);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
rxfilter_notify(nc);
return VIRTIO_NET_OK;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
error:
g_free(macs);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
return VIRTIO_NET_ERR;
}
static int virtio_net_handle_vlan_table(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
uint16_t vid;
size_t s;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
NetClientState *nc = qemu_get_queue(n->nic);
s = iov_to_buf(iov, iov_cnt, 0, &vid, sizeof(vid));
vid = virtio_lduw_p(vdev, &vid);
if (s != sizeof(vid)) {
return VIRTIO_NET_ERR;
}
if (vid >= MAX_VLAN)
return VIRTIO_NET_ERR;
if (cmd == VIRTIO_NET_CTRL_VLAN_ADD)
n->vlans[vid >> 5] |= (1U << (vid & 0x1f));
else if (cmd == VIRTIO_NET_CTRL_VLAN_DEL)
n->vlans[vid >> 5] &= ~(1U << (vid & 0x1f));
else
return VIRTIO_NET_ERR;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
rxfilter_notify(nc);
return VIRTIO_NET_OK;
}
static int virtio_net_handle_announce(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
trace_virtio_net_handle_announce(n->announce_timer.round);
if (cmd == VIRTIO_NET_CTRL_ANNOUNCE_ACK &&
n->status & VIRTIO_NET_S_ANNOUNCE) {
n->status &= ~VIRTIO_NET_S_ANNOUNCE;
if (n->announce_timer.round) {
qemu_announce_timer_step(&n->announce_timer);
}
return VIRTIO_NET_OK;
} else {
return VIRTIO_NET_ERR;
}
}
static void virtio_net_detach_epbf_rss(VirtIONet *n);
static void virtio_net_disable_rss(VirtIONet *n)
{
if (n->rss_data.enabled) {
trace_virtio_net_rss_disable();
}
n->rss_data.enabled = false;
virtio_net_detach_epbf_rss(n);
}
static bool virtio_net_attach_ebpf_to_backend(NICState *nic, int prog_fd)
{
NetClientState *nc = qemu_get_peer(qemu_get_queue(nic), 0);
if (nc == NULL || nc->info->set_steering_ebpf == NULL) {
return false;
}
return nc->info->set_steering_ebpf(nc, prog_fd);
}
static void rss_data_to_rss_config(struct VirtioNetRssData *data,
struct EBPFRSSConfig *config)
{
config->redirect = data->redirect;
config->populate_hash = data->populate_hash;
config->hash_types = data->hash_types;
config->indirections_len = data->indirections_len;
config->default_queue = data->default_queue;
}
static bool virtio_net_attach_epbf_rss(VirtIONet *n)
{
struct EBPFRSSConfig config = {};
if (!ebpf_rss_is_loaded(&n->ebpf_rss)) {
return false;
}
rss_data_to_rss_config(&n->rss_data, &config);
if (!ebpf_rss_set_all(&n->ebpf_rss, &config,
n->rss_data.indirections_table, n->rss_data.key)) {
return false;
}
if (!virtio_net_attach_ebpf_to_backend(n->nic, n->ebpf_rss.program_fd)) {
return false;
}
return true;
}
static void virtio_net_detach_epbf_rss(VirtIONet *n)
{
virtio_net_attach_ebpf_to_backend(n->nic, -1);
}
static bool virtio_net_load_ebpf(VirtIONet *n)
{
if (!virtio_net_attach_ebpf_to_backend(n->nic, -1)) {
/* backend does't support steering ebpf */
return false;
}
return ebpf_rss_load(&n->ebpf_rss);
}
static void virtio_net_unload_ebpf(VirtIONet *n)
{
virtio_net_attach_ebpf_to_backend(n->nic, -1);
ebpf_rss_unload(&n->ebpf_rss);
}
static uint16_t virtio_net_handle_rss(VirtIONet *n,
struct iovec *iov,
unsigned int iov_cnt,
bool do_rss)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
struct virtio_net_rss_config cfg;
size_t s, offset = 0, size_get;
uint16_t queue_pairs, i;
struct {
uint16_t us;
uint8_t b;
} QEMU_PACKED temp;
const char *err_msg = "";
uint32_t err_value = 0;
if (do_rss && !virtio_vdev_has_feature(vdev, VIRTIO_NET_F_RSS)) {
err_msg = "RSS is not negotiated";
goto error;
}
if (!do_rss && !virtio_vdev_has_feature(vdev, VIRTIO_NET_F_HASH_REPORT)) {
err_msg = "Hash report is not negotiated";
goto error;
}
size_get = offsetof(struct virtio_net_rss_config, indirection_table);
s = iov_to_buf(iov, iov_cnt, offset, &cfg, size_get);
if (s != size_get) {
err_msg = "Short command buffer";
err_value = (uint32_t)s;
goto error;
}
n->rss_data.hash_types = virtio_ldl_p(vdev, &cfg.hash_types);
n->rss_data.indirections_len =
virtio_lduw_p(vdev, &cfg.indirection_table_mask);
n->rss_data.indirections_len++;
if (!do_rss) {
n->rss_data.indirections_len = 1;
}
if (!is_power_of_2(n->rss_data.indirections_len)) {
err_msg = "Invalid size of indirection table";
err_value = n->rss_data.indirections_len;
goto error;
}
if (n->rss_data.indirections_len > VIRTIO_NET_RSS_MAX_TABLE_LEN) {
err_msg = "Too large indirection table";
err_value = n->rss_data.indirections_len;
goto error;
}
n->rss_data.default_queue = do_rss ?
virtio_lduw_p(vdev, &cfg.unclassified_queue) : 0;
if (n->rss_data.default_queue >= n->max_queue_pairs) {
err_msg = "Invalid default queue";
err_value = n->rss_data.default_queue;
goto error;
}
offset += size_get;
size_get = sizeof(uint16_t) * n->rss_data.indirections_len;
g_free(n->rss_data.indirections_table);
n->rss_data.indirections_table = g_malloc(size_get);
if (!n->rss_data.indirections_table) {
err_msg = "Can't allocate indirections table";
err_value = n->rss_data.indirections_len;
goto error;
}
s = iov_to_buf(iov, iov_cnt, offset,
n->rss_data.indirections_table, size_get);
if (s != size_get) {
err_msg = "Short indirection table buffer";
err_value = (uint32_t)s;
goto error;
}
for (i = 0; i < n->rss_data.indirections_len; ++i) {
uint16_t val = n->rss_data.indirections_table[i];
n->rss_data.indirections_table[i] = virtio_lduw_p(vdev, &val);
}
offset += size_get;
size_get = sizeof(temp);
s = iov_to_buf(iov, iov_cnt, offset, &temp, size_get);
if (s != size_get) {
err_msg = "Can't get queue_pairs";
err_value = (uint32_t)s;
goto error;
}
queue_pairs = do_rss ? virtio_lduw_p(vdev, &temp.us) : n->curr_queue_pairs;
if (queue_pairs == 0 || queue_pairs > n->max_queue_pairs) {
err_msg = "Invalid number of queue_pairs";
err_value = queue_pairs;
goto error;
}
if (temp.b > VIRTIO_NET_RSS_MAX_KEY_SIZE) {
err_msg = "Invalid key size";
err_value = temp.b;
goto error;
}
if (!temp.b && n->rss_data.hash_types) {
err_msg = "No key provided";
err_value = 0;
goto error;
}
if (!temp.b && !n->rss_data.hash_types) {
virtio_net_disable_rss(n);
return queue_pairs;
}
offset += size_get;
size_get = temp.b;
s = iov_to_buf(iov, iov_cnt, offset, n->rss_data.key, size_get);
if (s != size_get) {
err_msg = "Can get key buffer";
err_value = (uint32_t)s;
goto error;
}
n->rss_data.enabled = true;
if (!n->rss_data.populate_hash) {
if (!virtio_net_attach_epbf_rss(n)) {
/* EBPF must be loaded for vhost */
if (get_vhost_net(qemu_get_queue(n->nic)->peer)) {
warn_report("Can't load eBPF RSS for vhost");
goto error;
}
/* fallback to software RSS */
warn_report("Can't load eBPF RSS - fallback to software RSS");
n->rss_data.enabled_software_rss = true;
}
} else {
/* use software RSS for hash populating */
/* and detach eBPF if was loaded before */
virtio_net_detach_epbf_rss(n);
n->rss_data.enabled_software_rss = true;
}
trace_virtio_net_rss_enable(n->rss_data.hash_types,
n->rss_data.indirections_len,
temp.b);
return queue_pairs;
error:
trace_virtio_net_rss_error(err_msg, err_value);
virtio_net_disable_rss(n);
return 0;
}
static int virtio_net_handle_mq(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
uint16_t queue_pairs;
virtio-net: don't handle mq request in userspace handler for vhost-vdpa virtio_queue_host_notifier_read() tends to read pending event left behind on ioeventfd in the vhost_net_stop() path, and attempts to handle outstanding kicks from userspace vq handler. However, in the ctrl_vq handler, virtio_net_handle_mq() has a recursive call into virtio_net_set_status(), which may lead to segmentation fault as shown in below stack trace: 0 0x000055f800df1780 in qdev_get_parent_bus (dev=0x0) at ../hw/core/qdev.c:376 1 0x000055f800c68ad8 in virtio_bus_device_iommu_enabled (vdev=vdev@entry=0x0) at ../hw/virtio/virtio-bus.c:331 2 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>) at ../hw/virtio/vhost.c:318 3 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>, buffer=0x7fc19bec5240, len=2052, is_write=1, access_len=2052) at ../hw/virtio/vhost.c:336 4 0x000055f800d71867 in vhost_virtqueue_stop (dev=dev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590, vq=0x55f8037cceb0, idx=0) at ../hw/virtio/vhost.c:1241 5 0x000055f800d7406c in vhost_dev_stop (hdev=hdev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590) at ../hw/virtio/vhost.c:1839 6 0x000055f800bf00a7 in vhost_net_stop_one (net=0x55f8037ccc30, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:315 7 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 8 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 9 0x000055f800d4e628 in virtio_net_set_status (vdev=vdev@entry=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 10 0x000055f800d534d8 in virtio_net_handle_ctrl (iov_cnt=<optimized out>, iov=<optimized out>, cmd=0 '\000', n=0x55f8044ec590) at ../hw/net/virtio-net.c:1408 11 0x000055f800d534d8 in virtio_net_handle_ctrl (vdev=0x55f8044ec590, vq=0x7fc1a7e888d0) at ../hw/net/virtio-net.c:1452 12 0x000055f800d69f37 in virtio_queue_host_notifier_read (vq=0x7fc1a7e888d0) at ../hw/virtio/virtio.c:2331 13 0x000055f800d69f37 in virtio_queue_host_notifier_read (n=n@entry=0x7fc1a7e8894c) at ../hw/virtio/virtio.c:3575 14 0x000055f800c688e6 in virtio_bus_cleanup_host_notifier (bus=<optimized out>, n=n@entry=14) at ../hw/virtio/virtio-bus.c:312 15 0x000055f800d73106 in vhost_dev_disable_notifiers (hdev=hdev@entry=0x55f8035b51b0, vdev=vdev@entry=0x55f8044ec590) at ../../../include/hw/virtio/virtio-bus.h:35 16 0x000055f800bf00b2 in vhost_net_stop_one (net=0x55f8035b51b0, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:316 17 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 18 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 19 0x000055f800d4e628 in virtio_net_set_status (vdev=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 20 0x000055f800d6c4b2 in virtio_set_status (vdev=0x55f8044ec590, val=<optimized out>) at ../hw/virtio/virtio.c:1945 21 0x000055f800d11d9d in vm_state_notify (running=running@entry=false, state=state@entry=RUN_STATE_SHUTDOWN) at ../softmmu/runstate.c:333 22 0x000055f800d04e7a in do_vm_stop (state=state@entry=RUN_STATE_SHUTDOWN, send_stop=send_stop@entry=false) at ../softmmu/cpus.c:262 23 0x000055f800d04e99 in vm_shutdown () at ../softmmu/cpus.c:280 24 0x000055f800d126af in qemu_cleanup () at ../softmmu/runstate.c:812 25 0x000055f800ad5b13 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51 For now, temporarily disable handling MQ request from the ctrl_vq userspace hanlder to avoid the recursive virtio_net_set_status() call. Some rework is needed to allow changing the number of queues without going through a full virtio_net_set_status cycle, particularly for vhost-vdpa backend. This patch will need to be reverted as soon as future patches of having the change of #queues handled in userspace is merged. Fixes: 402378407db ("vhost-vdpa: multiqueue support") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-8-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:18 +03:00
NetClientState *nc = qemu_get_queue(n->nic);
virtio_net_disable_rss(n);
if (cmd == VIRTIO_NET_CTRL_MQ_HASH_CONFIG) {
queue_pairs = virtio_net_handle_rss(n, iov, iov_cnt, false);
return queue_pairs ? VIRTIO_NET_OK : VIRTIO_NET_ERR;
}
if (cmd == VIRTIO_NET_CTRL_MQ_RSS_CONFIG) {
queue_pairs = virtio_net_handle_rss(n, iov, iov_cnt, true);
} else if (cmd == VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET) {
struct virtio_net_ctrl_mq mq;
size_t s;
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_MQ)) {
return VIRTIO_NET_ERR;
}
s = iov_to_buf(iov, iov_cnt, 0, &mq, sizeof(mq));
if (s != sizeof(mq)) {
return VIRTIO_NET_ERR;
}
queue_pairs = virtio_lduw_p(vdev, &mq.virtqueue_pairs);
} else {
return VIRTIO_NET_ERR;
}
if (queue_pairs < VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN ||
queue_pairs > VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX ||
queue_pairs > n->max_queue_pairs ||
!n->multiqueue) {
return VIRTIO_NET_ERR;
}
n->curr_queue_pairs = queue_pairs;
virtio-net: don't handle mq request in userspace handler for vhost-vdpa virtio_queue_host_notifier_read() tends to read pending event left behind on ioeventfd in the vhost_net_stop() path, and attempts to handle outstanding kicks from userspace vq handler. However, in the ctrl_vq handler, virtio_net_handle_mq() has a recursive call into virtio_net_set_status(), which may lead to segmentation fault as shown in below stack trace: 0 0x000055f800df1780 in qdev_get_parent_bus (dev=0x0) at ../hw/core/qdev.c:376 1 0x000055f800c68ad8 in virtio_bus_device_iommu_enabled (vdev=vdev@entry=0x0) at ../hw/virtio/virtio-bus.c:331 2 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>) at ../hw/virtio/vhost.c:318 3 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>, buffer=0x7fc19bec5240, len=2052, is_write=1, access_len=2052) at ../hw/virtio/vhost.c:336 4 0x000055f800d71867 in vhost_virtqueue_stop (dev=dev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590, vq=0x55f8037cceb0, idx=0) at ../hw/virtio/vhost.c:1241 5 0x000055f800d7406c in vhost_dev_stop (hdev=hdev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590) at ../hw/virtio/vhost.c:1839 6 0x000055f800bf00a7 in vhost_net_stop_one (net=0x55f8037ccc30, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:315 7 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 8 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 9 0x000055f800d4e628 in virtio_net_set_status (vdev=vdev@entry=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 10 0x000055f800d534d8 in virtio_net_handle_ctrl (iov_cnt=<optimized out>, iov=<optimized out>, cmd=0 '\000', n=0x55f8044ec590) at ../hw/net/virtio-net.c:1408 11 0x000055f800d534d8 in virtio_net_handle_ctrl (vdev=0x55f8044ec590, vq=0x7fc1a7e888d0) at ../hw/net/virtio-net.c:1452 12 0x000055f800d69f37 in virtio_queue_host_notifier_read (vq=0x7fc1a7e888d0) at ../hw/virtio/virtio.c:2331 13 0x000055f800d69f37 in virtio_queue_host_notifier_read (n=n@entry=0x7fc1a7e8894c) at ../hw/virtio/virtio.c:3575 14 0x000055f800c688e6 in virtio_bus_cleanup_host_notifier (bus=<optimized out>, n=n@entry=14) at ../hw/virtio/virtio-bus.c:312 15 0x000055f800d73106 in vhost_dev_disable_notifiers (hdev=hdev@entry=0x55f8035b51b0, vdev=vdev@entry=0x55f8044ec590) at ../../../include/hw/virtio/virtio-bus.h:35 16 0x000055f800bf00b2 in vhost_net_stop_one (net=0x55f8035b51b0, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:316 17 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 18 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 19 0x000055f800d4e628 in virtio_net_set_status (vdev=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 20 0x000055f800d6c4b2 in virtio_set_status (vdev=0x55f8044ec590, val=<optimized out>) at ../hw/virtio/virtio.c:1945 21 0x000055f800d11d9d in vm_state_notify (running=running@entry=false, state=state@entry=RUN_STATE_SHUTDOWN) at ../softmmu/runstate.c:333 22 0x000055f800d04e7a in do_vm_stop (state=state@entry=RUN_STATE_SHUTDOWN, send_stop=send_stop@entry=false) at ../softmmu/cpus.c:262 23 0x000055f800d04e99 in vm_shutdown () at ../softmmu/cpus.c:280 24 0x000055f800d126af in qemu_cleanup () at ../softmmu/runstate.c:812 25 0x000055f800ad5b13 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51 For now, temporarily disable handling MQ request from the ctrl_vq userspace hanlder to avoid the recursive virtio_net_set_status() call. Some rework is needed to allow changing the number of queues without going through a full virtio_net_set_status cycle, particularly for vhost-vdpa backend. This patch will need to be reverted as soon as future patches of having the change of #queues handled in userspace is merged. Fixes: 402378407db ("vhost-vdpa: multiqueue support") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-8-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:18 +03:00
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
/*
* Avoid updating the backend for a vdpa device: We're only interested
* in updating the device model queues.
*/
return VIRTIO_NET_OK;
virtio-net: don't handle mq request in userspace handler for vhost-vdpa virtio_queue_host_notifier_read() tends to read pending event left behind on ioeventfd in the vhost_net_stop() path, and attempts to handle outstanding kicks from userspace vq handler. However, in the ctrl_vq handler, virtio_net_handle_mq() has a recursive call into virtio_net_set_status(), which may lead to segmentation fault as shown in below stack trace: 0 0x000055f800df1780 in qdev_get_parent_bus (dev=0x0) at ../hw/core/qdev.c:376 1 0x000055f800c68ad8 in virtio_bus_device_iommu_enabled (vdev=vdev@entry=0x0) at ../hw/virtio/virtio-bus.c:331 2 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>) at ../hw/virtio/vhost.c:318 3 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>, buffer=0x7fc19bec5240, len=2052, is_write=1, access_len=2052) at ../hw/virtio/vhost.c:336 4 0x000055f800d71867 in vhost_virtqueue_stop (dev=dev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590, vq=0x55f8037cceb0, idx=0) at ../hw/virtio/vhost.c:1241 5 0x000055f800d7406c in vhost_dev_stop (hdev=hdev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590) at ../hw/virtio/vhost.c:1839 6 0x000055f800bf00a7 in vhost_net_stop_one (net=0x55f8037ccc30, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:315 7 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 8 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 9 0x000055f800d4e628 in virtio_net_set_status (vdev=vdev@entry=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 10 0x000055f800d534d8 in virtio_net_handle_ctrl (iov_cnt=<optimized out>, iov=<optimized out>, cmd=0 '\000', n=0x55f8044ec590) at ../hw/net/virtio-net.c:1408 11 0x000055f800d534d8 in virtio_net_handle_ctrl (vdev=0x55f8044ec590, vq=0x7fc1a7e888d0) at ../hw/net/virtio-net.c:1452 12 0x000055f800d69f37 in virtio_queue_host_notifier_read (vq=0x7fc1a7e888d0) at ../hw/virtio/virtio.c:2331 13 0x000055f800d69f37 in virtio_queue_host_notifier_read (n=n@entry=0x7fc1a7e8894c) at ../hw/virtio/virtio.c:3575 14 0x000055f800c688e6 in virtio_bus_cleanup_host_notifier (bus=<optimized out>, n=n@entry=14) at ../hw/virtio/virtio-bus.c:312 15 0x000055f800d73106 in vhost_dev_disable_notifiers (hdev=hdev@entry=0x55f8035b51b0, vdev=vdev@entry=0x55f8044ec590) at ../../../include/hw/virtio/virtio-bus.h:35 16 0x000055f800bf00b2 in vhost_net_stop_one (net=0x55f8035b51b0, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:316 17 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 18 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 19 0x000055f800d4e628 in virtio_net_set_status (vdev=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 20 0x000055f800d6c4b2 in virtio_set_status (vdev=0x55f8044ec590, val=<optimized out>) at ../hw/virtio/virtio.c:1945 21 0x000055f800d11d9d in vm_state_notify (running=running@entry=false, state=state@entry=RUN_STATE_SHUTDOWN) at ../softmmu/runstate.c:333 22 0x000055f800d04e7a in do_vm_stop (state=state@entry=RUN_STATE_SHUTDOWN, send_stop=send_stop@entry=false) at ../softmmu/cpus.c:262 23 0x000055f800d04e99 in vm_shutdown () at ../softmmu/cpus.c:280 24 0x000055f800d126af in qemu_cleanup () at ../softmmu/runstate.c:812 25 0x000055f800ad5b13 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51 For now, temporarily disable handling MQ request from the ctrl_vq userspace hanlder to avoid the recursive virtio_net_set_status() call. Some rework is needed to allow changing the number of queues without going through a full virtio_net_set_status cycle, particularly for vhost-vdpa backend. This patch will need to be reverted as soon as future patches of having the change of #queues handled in userspace is merged. Fixes: 402378407db ("vhost-vdpa: multiqueue support") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-8-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:18 +03:00
}
/* stop the backend before changing the number of queue_pairs to avoid handling a
* disabled queue */
virtio_net_set_status(vdev, vdev->status);
virtio_net_set_queue_pairs(n);
return VIRTIO_NET_OK;
}
size_t virtio_net_handle_ctrl_iov(VirtIODevice *vdev,
const struct iovec *in_sg, unsigned in_num,
const struct iovec *out_sg,
unsigned out_num)
{
VirtIONet *n = VIRTIO_NET(vdev);
struct virtio_net_ctrl_hdr ctrl;
virtio_net_ctrl_ack status = VIRTIO_NET_ERR;
size_t s;
struct iovec *iov, *iov2;
if (iov_size(in_sg, in_num) < sizeof(status) ||
iov_size(out_sg, out_num) < sizeof(ctrl)) {
virtio_error(vdev, "virtio-net ctrl missing headers");
return 0;
}
iov2 = iov = g_memdup2(out_sg, sizeof(struct iovec) * out_num);
s = iov_to_buf(iov, out_num, 0, &ctrl, sizeof(ctrl));
iov_discard_front(&iov, &out_num, sizeof(ctrl));
if (s != sizeof(ctrl)) {
status = VIRTIO_NET_ERR;
} else if (ctrl.class == VIRTIO_NET_CTRL_RX) {
status = virtio_net_handle_rx_mode(n, ctrl.cmd, iov, out_num);
} else if (ctrl.class == VIRTIO_NET_CTRL_MAC) {
status = virtio_net_handle_mac(n, ctrl.cmd, iov, out_num);
} else if (ctrl.class == VIRTIO_NET_CTRL_VLAN) {
status = virtio_net_handle_vlan_table(n, ctrl.cmd, iov, out_num);
} else if (ctrl.class == VIRTIO_NET_CTRL_ANNOUNCE) {
status = virtio_net_handle_announce(n, ctrl.cmd, iov, out_num);
} else if (ctrl.class == VIRTIO_NET_CTRL_MQ) {
status = virtio_net_handle_mq(n, ctrl.cmd, iov, out_num);
} else if (ctrl.class == VIRTIO_NET_CTRL_GUEST_OFFLOADS) {
status = virtio_net_handle_offloads(n, ctrl.cmd, iov, out_num);
}
s = iov_from_buf(in_sg, in_num, 0, &status, sizeof(status));
assert(s == sizeof(status));
g_free(iov2);
return sizeof(status);
}
static void virtio_net_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
{
VirtQueueElement *elem;
for (;;) {
size_t written;
elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
break;
}
written = virtio_net_handle_ctrl_iov(vdev, elem->in_sg, elem->in_num,
elem->out_sg, elem->out_num);
if (written > 0) {
virtqueue_push(vq, elem, written);
virtio_notify(vdev, vq);
g_free(elem);
} else {
virtqueue_detach_element(vq, elem, 0);
g_free(elem);
break;
}
}
}
/* RX */
static void virtio_net_handle_rx(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIONet *n = VIRTIO_NET(vdev);
int queue_index = vq2q(virtio_get_queue_index(vq));
qemu_flush_queued_packets(qemu_get_subqueue(n->nic, queue_index));
}
static bool virtio_net_can_receive(NetClientState *nc)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
VirtIODevice *vdev = VIRTIO_DEVICE(n);
VirtIONetQueue *q = virtio_net_get_subqueue(nc);
if (!vdev->vm_running) {
return false;
}
if (nc->queue_index >= n->curr_queue_pairs) {
return false;
}
if (!virtio_queue_ready(q->rx_vq) ||
!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK)) {
return false;
}
return true;
}
static int virtio_net_has_buffers(VirtIONetQueue *q, int bufsize)
{
VirtIONet *n = q->n;
if (virtio_queue_empty(q->rx_vq) ||
(n->mergeable_rx_bufs &&
!virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
virtio_queue_set_notification(q->rx_vq, 1);
/* To avoid a race condition where the guest has made some buffers
* available after the above check but before notification was
* enabled, check for available buffers again.
*/
if (virtio_queue_empty(q->rx_vq) ||
(n->mergeable_rx_bufs &&
!virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
return 0;
}
}
virtio_queue_set_notification(q->rx_vq, 0);
return 1;
}
static void virtio_net_hdr_swap(VirtIODevice *vdev, struct virtio_net_hdr *hdr)
{
virtio_tswap16s(vdev, &hdr->hdr_len);
virtio_tswap16s(vdev, &hdr->gso_size);
virtio_tswap16s(vdev, &hdr->csum_start);
virtio_tswap16s(vdev, &hdr->csum_offset);
}
/* dhclient uses AF_PACKET but doesn't pass auxdata to the kernel so
* it never finds out that the packets don't have valid checksums. This
* causes dhclient to get upset. Fedora's carried a patch for ages to
* fix this with Xen but it hasn't appeared in an upstream release of
* dhclient yet.
*
* To avoid breaking existing guests, we catch udp packets and add
* checksums. This is terrible but it's better than hacking the guest
* kernels.
*
* N.B. if we introduce a zero-copy API, this operation is no longer free so
* we should provide a mechanism to disable it to avoid polluting the host
* cache.
*/
static void work_around_broken_dhclient(struct virtio_net_hdr *hdr,
uint8_t *buf, size_t size)
{
if ((hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) && /* missing csum */
(size > 27 && size < 1500) && /* normal sized MTU */
(buf[12] == 0x08 && buf[13] == 0x00) && /* ethertype == IPv4 */
(buf[23] == 17) && /* ip.protocol == UDP */
(buf[34] == 0 && buf[35] == 67)) { /* udp.srcport == bootps */
net_checksum_calculate(buf, size, CSUM_UDP);
hdr->flags &= ~VIRTIO_NET_HDR_F_NEEDS_CSUM;
}
}
static void receive_header(VirtIONet *n, const struct iovec *iov, int iov_cnt,
const void *buf, size_t size)
{
if (n->has_vnet_hdr) {
/* FIXME this cast is evil */
void *wbuf = (void *)buf;
work_around_broken_dhclient(wbuf, wbuf + n->host_hdr_len,
size - n->host_hdr_len);
if (n->needs_vnet_hdr_swap) {
virtio_net_hdr_swap(VIRTIO_DEVICE(n), wbuf);
}
iov_from_buf(iov, iov_cnt, 0, buf, sizeof(struct virtio_net_hdr));
} else {
struct virtio_net_hdr hdr = {
.flags = 0,
.gso_type = VIRTIO_NET_HDR_GSO_NONE
};
iov_from_buf(iov, iov_cnt, 0, &hdr, sizeof hdr);
}
}
static int receive_filter(VirtIONet *n, const uint8_t *buf, int size)
{
static const uint8_t bcast[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
static const uint8_t vlan[] = {0x81, 0x00};
uint8_t *ptr = (uint8_t *)buf;
int i;
if (n->promisc)
return 1;
ptr += n->host_hdr_len;
if (!memcmp(&ptr[12], vlan, sizeof(vlan))) {
int vid = lduw_be_p(ptr + 14) & 0xfff;
if (!(n->vlans[vid >> 5] & (1U << (vid & 0x1f))))
return 0;
}
if (ptr[0] & 1) { // multicast
if (!memcmp(ptr, bcast, sizeof(bcast))) {
return !n->nobcast;
} else if (n->nomulti) {
return 0;
} else if (n->allmulti || n->mac_table.multi_overflow) {
return 1;
}
for (i = n->mac_table.first_multi; i < n->mac_table.in_use; i++) {
if (!memcmp(ptr, &n->mac_table.macs[i * ETH_ALEN], ETH_ALEN)) {
return 1;
}
}
} else { // unicast
if (n->nouni) {
return 0;
} else if (n->alluni || n->mac_table.uni_overflow) {
return 1;
} else if (!memcmp(ptr, n->mac, ETH_ALEN)) {
return 1;
}
for (i = 0; i < n->mac_table.first_multi; i++) {
if (!memcmp(ptr, &n->mac_table.macs[i * ETH_ALEN], ETH_ALEN)) {
return 1;
}
}
}
return 0;
}
static uint8_t virtio_net_get_hash_type(bool hasip4,
bool hasip6,
EthL4HdrProto l4hdr_proto,
uint32_t types)
{
if (hasip4) {
switch (l4hdr_proto) {
case ETH_L4_HDR_PROTO_TCP:
if (types & VIRTIO_NET_RSS_HASH_TYPE_TCPv4) {
return NetPktRssIpV4Tcp;
}
break;
case ETH_L4_HDR_PROTO_UDP:
if (types & VIRTIO_NET_RSS_HASH_TYPE_UDPv4) {
return NetPktRssIpV4Udp;
}
break;
default:
break;
}
if (types & VIRTIO_NET_RSS_HASH_TYPE_IPv4) {
return NetPktRssIpV4;
}
} else if (hasip6) {
switch (l4hdr_proto) {
case ETH_L4_HDR_PROTO_TCP:
if (types & VIRTIO_NET_RSS_HASH_TYPE_TCP_EX) {
return NetPktRssIpV6TcpEx;
}
if (types & VIRTIO_NET_RSS_HASH_TYPE_TCPv6) {
return NetPktRssIpV6Tcp;
}
break;
case ETH_L4_HDR_PROTO_UDP:
if (types & VIRTIO_NET_RSS_HASH_TYPE_UDP_EX) {
return NetPktRssIpV6UdpEx;
}
if (types & VIRTIO_NET_RSS_HASH_TYPE_UDPv6) {
return NetPktRssIpV6Udp;
}
break;
default:
break;
}
if (types & VIRTIO_NET_RSS_HASH_TYPE_IP_EX) {
return NetPktRssIpV6Ex;
}
if (types & VIRTIO_NET_RSS_HASH_TYPE_IPv6) {
return NetPktRssIpV6;
}
}
return 0xff;
}
static void virtio_set_packet_hash(const uint8_t *buf, uint8_t report,
uint32_t hash)
{
struct virtio_net_hdr_v1_hash *hdr = (void *)buf;
hdr->hash_value = hash;
hdr->hash_report = report;
}
static int virtio_net_process_rss(NetClientState *nc, const uint8_t *buf,
size_t size)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
unsigned int index = nc->queue_index, new_index = index;
struct NetRxPkt *pkt = n->rx_pkt;
uint8_t net_hash_type;
uint32_t hash;
bool hasip4, hasip6;
EthL4HdrProto l4hdr_proto;
static const uint8_t reports[NetPktRssIpV6UdpEx + 1] = {
VIRTIO_NET_HASH_REPORT_IPv4,
VIRTIO_NET_HASH_REPORT_TCPv4,
VIRTIO_NET_HASH_REPORT_TCPv6,
VIRTIO_NET_HASH_REPORT_IPv6,
VIRTIO_NET_HASH_REPORT_IPv6_EX,
VIRTIO_NET_HASH_REPORT_TCPv6_EX,
VIRTIO_NET_HASH_REPORT_UDPv4,
VIRTIO_NET_HASH_REPORT_UDPv6,
VIRTIO_NET_HASH_REPORT_UDPv6_EX
};
net_rx_pkt_set_protocols(pkt, buf + n->host_hdr_len,
size - n->host_hdr_len);
net_rx_pkt_get_protocols(pkt, &hasip4, &hasip6, &l4hdr_proto);
net_hash_type = virtio_net_get_hash_type(hasip4, hasip6, l4hdr_proto,
n->rss_data.hash_types);
if (net_hash_type > NetPktRssIpV6UdpEx) {
if (n->rss_data.populate_hash) {
virtio_set_packet_hash(buf, VIRTIO_NET_HASH_REPORT_NONE, 0);
}
return n->rss_data.redirect ? n->rss_data.default_queue : -1;
}
hash = net_rx_pkt_calc_rss_hash(pkt, net_hash_type, n->rss_data.key);
if (n->rss_data.populate_hash) {
virtio_set_packet_hash(buf, reports[net_hash_type], hash);
}
if (n->rss_data.redirect) {
new_index = hash & (n->rss_data.indirections_len - 1);
new_index = n->rss_data.indirections_table[new_index];
}
return (index == new_index) ? -1 : new_index;
}
static ssize_t virtio_net_receive_rcu(NetClientState *nc, const uint8_t *buf,
size_t size, bool no_rss)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
VirtIONetQueue *q = virtio_net_get_subqueue(nc);
VirtIODevice *vdev = VIRTIO_DEVICE(n);
VirtQueueElement *elems[VIRTQUEUE_MAX_SIZE];
size_t lens[VIRTQUEUE_MAX_SIZE];
struct iovec mhdr_sg[VIRTQUEUE_MAX_SIZE];
struct virtio_net_hdr_mrg_rxbuf mhdr;
unsigned mhdr_cnt = 0;
size_t offset, i, guest_offset, j;
ssize_t err;
if (!virtio_net_can_receive(nc)) {
return -1;
}
if (!no_rss && n->rss_data.enabled && n->rss_data.enabled_software_rss) {
int index = virtio_net_process_rss(nc, buf, size);
if (index >= 0) {
NetClientState *nc2 = qemu_get_subqueue(n->nic, index);
return virtio_net_receive_rcu(nc2, buf, size, true);
}
}
/* hdr_len refers to the header we supply to the guest */
if (!virtio_net_has_buffers(q, size + n->guest_hdr_len - n->host_hdr_len)) {
return 0;
}
if (!receive_filter(n, buf, size))
return size;
offset = i = 0;
while (offset < size) {
VirtQueueElement *elem;
int len, total;
const struct iovec *sg;
total = 0;
if (i == VIRTQUEUE_MAX_SIZE) {
virtio_error(vdev, "virtio-net unexpected long buffer chain");
err = size;
goto err;
}
elem = virtqueue_pop(q->rx_vq, sizeof(VirtQueueElement));
if (!elem) {
if (i) {
virtio_error(vdev, "virtio-net unexpected empty queue: "
"i %zd mergeable %d offset %zd, size %zd, "
"guest hdr len %zd, host hdr len %zd "
"guest features 0x%" PRIx64,
i, n->mergeable_rx_bufs, offset, size,
n->guest_hdr_len, n->host_hdr_len,
vdev->guest_features);
}
err = -1;
goto err;
}
if (elem->in_num < 1) {
virtio_error(vdev,
"virtio-net receive queue contains no in buffers");
virtqueue_detach_element(q->rx_vq, elem, 0);
g_free(elem);
err = -1;
goto err;
}
sg = elem->in_sg;
if (i == 0) {
assert(offset == 0);
if (n->mergeable_rx_bufs) {
mhdr_cnt = iov_copy(mhdr_sg, ARRAY_SIZE(mhdr_sg),
sg, elem->in_num,
offsetof(typeof(mhdr), num_buffers),
sizeof(mhdr.num_buffers));
}
receive_header(n, sg, elem->in_num, buf, size);
if (n->rss_data.populate_hash) {
offset = sizeof(mhdr);
iov_from_buf(sg, elem->in_num, offset,
buf + offset, n->host_hdr_len - sizeof(mhdr));
}
offset = n->host_hdr_len;
total += n->guest_hdr_len;
guest_offset = n->guest_hdr_len;
} else {
guest_offset = 0;
}
/* copy in packet. ugh */
len = iov_from_buf(sg, elem->in_num, guest_offset,
buf + offset, size - offset);
total += len;
offset += len;
/* If buffers can't be merged, at this point we
* must have consumed the complete packet.
* Otherwise, drop it. */
if (!n->mergeable_rx_bufs && offset < size) {
virtqueue_unpop(q->rx_vq, elem, total);
g_free(elem);
err = size;
goto err;
}
elems[i] = elem;
lens[i] = total;
i++;
}
if (mhdr_cnt) {
virtio_stw_p(vdev, &mhdr.num_buffers, i);
iov_from_buf(mhdr_sg, mhdr_cnt,
0,
&mhdr.num_buffers, sizeof mhdr.num_buffers);
}
for (j = 0; j < i; j++) {
/* signal other side */
virtqueue_fill(q->rx_vq, elems[j], lens[j], j);
g_free(elems[j]);
}
virtqueue_flush(q->rx_vq, i);
virtio_notify(vdev, q->rx_vq);
return size;
err:
for (j = 0; j < i; j++) {
virtqueue_detach_element(q->rx_vq, elems[j], lens[j]);
g_free(elems[j]);
}
return err;
}
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
static ssize_t virtio_net_do_receive(NetClientState *nc, const uint8_t *buf,
size_t size)
{
RCU_READ_LOCK_GUARD();
return virtio_net_receive_rcu(nc, buf, size, false);
}
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
static void virtio_net_rsc_extract_unit4(VirtioNetRscChain *chain,
const uint8_t *buf,
VirtioNetRscUnit *unit)
{
uint16_t ip_hdrlen;
struct ip_header *ip;
ip = (struct ip_header *)(buf + chain->n->guest_hdr_len
+ sizeof(struct eth_header));
unit->ip = (void *)ip;
ip_hdrlen = (ip->ip_ver_len & 0xF) << 2;
unit->ip_plen = &ip->ip_len;
unit->tcp = (struct tcp_header *)(((uint8_t *)unit->ip) + ip_hdrlen);
unit->tcp_hdrlen = (htons(unit->tcp->th_offset_flags) & 0xF000) >> 10;
unit->payload = htons(*unit->ip_plen) - ip_hdrlen - unit->tcp_hdrlen;
}
static void virtio_net_rsc_extract_unit6(VirtioNetRscChain *chain,
const uint8_t *buf,
VirtioNetRscUnit *unit)
{
struct ip6_header *ip6;
ip6 = (struct ip6_header *)(buf + chain->n->guest_hdr_len
+ sizeof(struct eth_header));
unit->ip = ip6;
unit->ip_plen = &(ip6->ip6_ctlun.ip6_un1.ip6_un1_plen);
various: Remove suspicious '\' character outside of #define in C code Fixes the following coccinelle warnings: $ spatch --sp-file --verbose-parsing ... \ scripts/coccinelle/remove_local_err.cocci ... SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213 SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329 SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133 SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081 SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529 SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468 SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173 Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200412223619.11284-2-f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-04-13 01:35:56 +03:00
unit->tcp = (struct tcp_header *)(((uint8_t *)unit->ip)
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
+ sizeof(struct ip6_header));
unit->tcp_hdrlen = (htons(unit->tcp->th_offset_flags) & 0xF000) >> 10;
/* There is a difference between payload lenght in ipv4 and v6,
ip header is excluded in ipv6 */
unit->payload = htons(*unit->ip_plen) - unit->tcp_hdrlen;
}
static size_t virtio_net_rsc_drain_seg(VirtioNetRscChain *chain,
VirtioNetRscSeg *seg)
{
int ret;
struct virtio_net_hdr_v1 *h;
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
h = (struct virtio_net_hdr_v1 *)seg->buf;
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
h->flags = 0;
h->gso_type = VIRTIO_NET_HDR_GSO_NONE;
if (seg->is_coalesced) {
h->rsc.segments = seg->packets;
h->rsc.dup_acks = seg->dup_ack;
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
h->flags = VIRTIO_NET_HDR_F_RSC_INFO;
if (chain->proto == ETH_P_IP) {
h->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
} else {
h->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
}
}
ret = virtio_net_do_receive(seg->nc, seg->buf, seg->size);
QTAILQ_REMOVE(&chain->buffers, seg, next);
g_free(seg->buf);
g_free(seg);
return ret;
}
static void virtio_net_rsc_purge(void *opq)
{
VirtioNetRscSeg *seg, *rn;
VirtioNetRscChain *chain = (VirtioNetRscChain *)opq;
QTAILQ_FOREACH_SAFE(seg, &chain->buffers, next, rn) {
if (virtio_net_rsc_drain_seg(chain, seg) == 0) {
chain->stat.purge_failed++;
continue;
}
}
chain->stat.timer++;
if (!QTAILQ_EMPTY(&chain->buffers)) {
timer_mod(chain->drain_timer,
qemu_clock_get_ns(QEMU_CLOCK_HOST) + chain->n->rsc_timeout);
}
}
static void virtio_net_rsc_cleanup(VirtIONet *n)
{
VirtioNetRscChain *chain, *rn_chain;
VirtioNetRscSeg *seg, *rn_seg;
QTAILQ_FOREACH_SAFE(chain, &n->rsc_chains, next, rn_chain) {
QTAILQ_FOREACH_SAFE(seg, &chain->buffers, next, rn_seg) {
QTAILQ_REMOVE(&chain->buffers, seg, next);
g_free(seg->buf);
g_free(seg);
}
timer_free(chain->drain_timer);
QTAILQ_REMOVE(&n->rsc_chains, chain, next);
g_free(chain);
}
}
static void virtio_net_rsc_cache_buf(VirtioNetRscChain *chain,
NetClientState *nc,
const uint8_t *buf, size_t size)
{
uint16_t hdr_len;
VirtioNetRscSeg *seg;
hdr_len = chain->n->guest_hdr_len;
seg = g_new(VirtioNetRscSeg, 1);
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
seg->buf = g_malloc(hdr_len + sizeof(struct eth_header)
+ sizeof(struct ip6_header) + VIRTIO_NET_MAX_TCP_PAYLOAD);
memcpy(seg->buf, buf, size);
seg->size = size;
seg->packets = 1;
seg->dup_ack = 0;
seg->is_coalesced = 0;
seg->nc = nc;
QTAILQ_INSERT_TAIL(&chain->buffers, seg, next);
chain->stat.cache++;
switch (chain->proto) {
case ETH_P_IP:
virtio_net_rsc_extract_unit4(chain, seg->buf, &seg->unit);
break;
case ETH_P_IPV6:
virtio_net_rsc_extract_unit6(chain, seg->buf, &seg->unit);
break;
default:
g_assert_not_reached();
}
}
static int32_t virtio_net_rsc_handle_ack(VirtioNetRscChain *chain,
VirtioNetRscSeg *seg,
const uint8_t *buf,
struct tcp_header *n_tcp,
struct tcp_header *o_tcp)
{
uint32_t nack, oack;
uint16_t nwin, owin;
nack = htonl(n_tcp->th_ack);
nwin = htons(n_tcp->th_win);
oack = htonl(o_tcp->th_ack);
owin = htons(o_tcp->th_win);
if ((nack - oack) >= VIRTIO_NET_MAX_TCP_PAYLOAD) {
chain->stat.ack_out_of_win++;
return RSC_FINAL;
} else if (nack == oack) {
/* duplicated ack or window probe */
if (nwin == owin) {
/* duplicated ack, add dup ack count due to whql test up to 1 */
chain->stat.dup_ack++;
return RSC_FINAL;
} else {
/* Coalesce window update */
o_tcp->th_win = n_tcp->th_win;
chain->stat.win_update++;
return RSC_COALESCE;
}
} else {
/* pure ack, go to 'C', finalize*/
chain->stat.pure_ack++;
return RSC_FINAL;
}
}
static int32_t virtio_net_rsc_coalesce_data(VirtioNetRscChain *chain,
VirtioNetRscSeg *seg,
const uint8_t *buf,
VirtioNetRscUnit *n_unit)
{
void *data;
uint16_t o_ip_len;
uint32_t nseq, oseq;
VirtioNetRscUnit *o_unit;
o_unit = &seg->unit;
o_ip_len = htons(*o_unit->ip_plen);
nseq = htonl(n_unit->tcp->th_seq);
oseq = htonl(o_unit->tcp->th_seq);
/* out of order or retransmitted. */
if ((nseq - oseq) > VIRTIO_NET_MAX_TCP_PAYLOAD) {
chain->stat.data_out_of_win++;
return RSC_FINAL;
}
data = ((uint8_t *)n_unit->tcp) + n_unit->tcp_hdrlen;
if (nseq == oseq) {
if ((o_unit->payload == 0) && n_unit->payload) {
/* From no payload to payload, normal case, not a dup ack or etc */
chain->stat.data_after_pure_ack++;
goto coalesce;
} else {
return virtio_net_rsc_handle_ack(chain, seg, buf,
n_unit->tcp, o_unit->tcp);
}
} else if ((nseq - oseq) != o_unit->payload) {
/* Not a consistent packet, out of order */
chain->stat.data_out_of_order++;
return RSC_FINAL;
} else {
coalesce:
if ((o_ip_len + n_unit->payload) > chain->max_payload) {
chain->stat.over_size++;
return RSC_FINAL;
}
/* Here comes the right data, the payload length in v4/v6 is different,
so use the field value to update and record the new data len */
o_unit->payload += n_unit->payload; /* update new data len */
/* update field in ip header */
*o_unit->ip_plen = htons(o_ip_len + n_unit->payload);
/* Bring 'PUSH' big, the whql test guide says 'PUSH' can be coalesced
for windows guest, while this may change the behavior for linux
guest (only if it uses RSC feature). */
o_unit->tcp->th_offset_flags = n_unit->tcp->th_offset_flags;
o_unit->tcp->th_ack = n_unit->tcp->th_ack;
o_unit->tcp->th_win = n_unit->tcp->th_win;
memmove(seg->buf + seg->size, data, n_unit->payload);
seg->size += n_unit->payload;
seg->packets++;
chain->stat.coalesced++;
return RSC_COALESCE;
}
}
static int32_t virtio_net_rsc_coalesce4(VirtioNetRscChain *chain,
VirtioNetRscSeg *seg,
const uint8_t *buf, size_t size,
VirtioNetRscUnit *unit)
{
struct ip_header *ip1, *ip2;
ip1 = (struct ip_header *)(unit->ip);
ip2 = (struct ip_header *)(seg->unit.ip);
if ((ip1->ip_src ^ ip2->ip_src) || (ip1->ip_dst ^ ip2->ip_dst)
|| (unit->tcp->th_sport ^ seg->unit.tcp->th_sport)
|| (unit->tcp->th_dport ^ seg->unit.tcp->th_dport)) {
chain->stat.no_match++;
return RSC_NO_MATCH;
}
return virtio_net_rsc_coalesce_data(chain, seg, buf, unit);
}
static int32_t virtio_net_rsc_coalesce6(VirtioNetRscChain *chain,
VirtioNetRscSeg *seg,
const uint8_t *buf, size_t size,
VirtioNetRscUnit *unit)
{
struct ip6_header *ip1, *ip2;
ip1 = (struct ip6_header *)(unit->ip);
ip2 = (struct ip6_header *)(seg->unit.ip);
if (memcmp(&ip1->ip6_src, &ip2->ip6_src, sizeof(struct in6_address))
|| memcmp(&ip1->ip6_dst, &ip2->ip6_dst, sizeof(struct in6_address))
|| (unit->tcp->th_sport ^ seg->unit.tcp->th_sport)
|| (unit->tcp->th_dport ^ seg->unit.tcp->th_dport)) {
chain->stat.no_match++;
return RSC_NO_MATCH;
}
return virtio_net_rsc_coalesce_data(chain, seg, buf, unit);
}
/* Packets with 'SYN' should bypass, other flag should be sent after drain
* to prevent out of order */
static int virtio_net_rsc_tcp_ctrl_check(VirtioNetRscChain *chain,
struct tcp_header *tcp)
{
uint16_t tcp_hdr;
uint16_t tcp_flag;
tcp_flag = htons(tcp->th_offset_flags);
tcp_hdr = (tcp_flag & VIRTIO_NET_TCP_HDR_LENGTH) >> 10;
tcp_flag &= VIRTIO_NET_TCP_FLAG;
if (tcp_flag & TH_SYN) {
chain->stat.tcp_syn++;
return RSC_BYPASS;
}
if (tcp_flag & (TH_FIN | TH_URG | TH_RST | TH_ECE | TH_CWR)) {
chain->stat.tcp_ctrl_drain++;
return RSC_FINAL;
}
if (tcp_hdr > sizeof(struct tcp_header)) {
chain->stat.tcp_all_opt++;
return RSC_FINAL;
}
return RSC_CANDIDATE;
}
static size_t virtio_net_rsc_do_coalesce(VirtioNetRscChain *chain,
NetClientState *nc,
const uint8_t *buf, size_t size,
VirtioNetRscUnit *unit)
{
int ret;
VirtioNetRscSeg *seg, *nseg;
if (QTAILQ_EMPTY(&chain->buffers)) {
chain->stat.empty_cache++;
virtio_net_rsc_cache_buf(chain, nc, buf, size);
timer_mod(chain->drain_timer,
qemu_clock_get_ns(QEMU_CLOCK_HOST) + chain->n->rsc_timeout);
return size;
}
QTAILQ_FOREACH_SAFE(seg, &chain->buffers, next, nseg) {
if (chain->proto == ETH_P_IP) {
ret = virtio_net_rsc_coalesce4(chain, seg, buf, size, unit);
} else {
ret = virtio_net_rsc_coalesce6(chain, seg, buf, size, unit);
}
if (ret == RSC_FINAL) {
if (virtio_net_rsc_drain_seg(chain, seg) == 0) {
/* Send failed */
chain->stat.final_failed++;
return 0;
}
/* Send current packet */
return virtio_net_do_receive(nc, buf, size);
} else if (ret == RSC_NO_MATCH) {
continue;
} else {
/* Coalesced, mark coalesced flag to tell calc cksum for ipv4 */
seg->is_coalesced = 1;
return size;
}
}
chain->stat.no_match_cache++;
virtio_net_rsc_cache_buf(chain, nc, buf, size);
return size;
}
/* Drain a connection data, this is to avoid out of order segments */
static size_t virtio_net_rsc_drain_flow(VirtioNetRscChain *chain,
NetClientState *nc,
const uint8_t *buf, size_t size,
uint16_t ip_start, uint16_t ip_size,
uint16_t tcp_port)
{
VirtioNetRscSeg *seg, *nseg;
uint32_t ppair1, ppair2;
ppair1 = *(uint32_t *)(buf + tcp_port);
QTAILQ_FOREACH_SAFE(seg, &chain->buffers, next, nseg) {
ppair2 = *(uint32_t *)(seg->buf + tcp_port);
if (memcmp(buf + ip_start, seg->buf + ip_start, ip_size)
|| (ppair1 != ppair2)) {
continue;
}
if (virtio_net_rsc_drain_seg(chain, seg) == 0) {
chain->stat.drain_failed++;
}
break;
}
return virtio_net_do_receive(nc, buf, size);
}
static int32_t virtio_net_rsc_sanity_check4(VirtioNetRscChain *chain,
struct ip_header *ip,
const uint8_t *buf, size_t size)
{
uint16_t ip_len;
/* Not an ipv4 packet */
if (((ip->ip_ver_len & 0xF0) >> 4) != IP_HEADER_VERSION_4) {
chain->stat.ip_option++;
return RSC_BYPASS;
}
/* Don't handle packets with ip option */
if ((ip->ip_ver_len & 0xF) != VIRTIO_NET_IP4_HEADER_LENGTH) {
chain->stat.ip_option++;
return RSC_BYPASS;
}
if (ip->ip_p != IPPROTO_TCP) {
chain->stat.bypass_not_tcp++;
return RSC_BYPASS;
}
/* Don't handle packets with ip fragment */
if (!(htons(ip->ip_off) & IP_DF)) {
chain->stat.ip_frag++;
return RSC_BYPASS;
}
/* Don't handle packets with ecn flag */
if (IPTOS_ECN(ip->ip_tos)) {
chain->stat.ip_ecn++;
return RSC_BYPASS;
}
ip_len = htons(ip->ip_len);
if (ip_len < (sizeof(struct ip_header) + sizeof(struct tcp_header))
|| ip_len > (size - chain->n->guest_hdr_len -
sizeof(struct eth_header))) {
chain->stat.ip_hacked++;
return RSC_BYPASS;
}
return RSC_CANDIDATE;
}
static size_t virtio_net_rsc_receive4(VirtioNetRscChain *chain,
NetClientState *nc,
const uint8_t *buf, size_t size)
{
int32_t ret;
uint16_t hdr_len;
VirtioNetRscUnit unit;
hdr_len = ((VirtIONet *)(chain->n))->guest_hdr_len;
if (size < (hdr_len + sizeof(struct eth_header) + sizeof(struct ip_header)
+ sizeof(struct tcp_header))) {
chain->stat.bypass_not_tcp++;
return virtio_net_do_receive(nc, buf, size);
}
virtio_net_rsc_extract_unit4(chain, buf, &unit);
if (virtio_net_rsc_sanity_check4(chain, unit.ip, buf, size)
!= RSC_CANDIDATE) {
return virtio_net_do_receive(nc, buf, size);
}
ret = virtio_net_rsc_tcp_ctrl_check(chain, unit.tcp);
if (ret == RSC_BYPASS) {
return virtio_net_do_receive(nc, buf, size);
} else if (ret == RSC_FINAL) {
return virtio_net_rsc_drain_flow(chain, nc, buf, size,
((hdr_len + sizeof(struct eth_header)) + 12),
VIRTIO_NET_IP4_ADDR_SIZE,
hdr_len + sizeof(struct eth_header) + sizeof(struct ip_header));
}
return virtio_net_rsc_do_coalesce(chain, nc, buf, size, &unit);
}
static int32_t virtio_net_rsc_sanity_check6(VirtioNetRscChain *chain,
struct ip6_header *ip6,
const uint8_t *buf, size_t size)
{
uint16_t ip_len;
if (((ip6->ip6_ctlun.ip6_un1.ip6_un1_flow & 0xF0) >> 4)
!= IP_HEADER_VERSION_6) {
return RSC_BYPASS;
}
/* Both option and protocol is checked in this */
if (ip6->ip6_ctlun.ip6_un1.ip6_un1_nxt != IPPROTO_TCP) {
chain->stat.bypass_not_tcp++;
return RSC_BYPASS;
}
ip_len = htons(ip6->ip6_ctlun.ip6_un1.ip6_un1_plen);
if (ip_len < sizeof(struct tcp_header) ||
ip_len > (size - chain->n->guest_hdr_len - sizeof(struct eth_header)
- sizeof(struct ip6_header))) {
chain->stat.ip_hacked++;
return RSC_BYPASS;
}
/* Don't handle packets with ecn flag */
if (IP6_ECN(ip6->ip6_ctlun.ip6_un3.ip6_un3_ecn)) {
chain->stat.ip_ecn++;
return RSC_BYPASS;
}
return RSC_CANDIDATE;
}
static size_t virtio_net_rsc_receive6(void *opq, NetClientState *nc,
const uint8_t *buf, size_t size)
{
int32_t ret;
uint16_t hdr_len;
VirtioNetRscChain *chain;
VirtioNetRscUnit unit;
chain = opq;
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
hdr_len = ((VirtIONet *)(chain->n))->guest_hdr_len;
if (size < (hdr_len + sizeof(struct eth_header) + sizeof(struct ip6_header)
+ sizeof(tcp_header))) {
return virtio_net_do_receive(nc, buf, size);
}
virtio_net_rsc_extract_unit6(chain, buf, &unit);
if (RSC_CANDIDATE != virtio_net_rsc_sanity_check6(chain,
unit.ip, buf, size)) {
return virtio_net_do_receive(nc, buf, size);
}
ret = virtio_net_rsc_tcp_ctrl_check(chain, unit.tcp);
if (ret == RSC_BYPASS) {
return virtio_net_do_receive(nc, buf, size);
} else if (ret == RSC_FINAL) {
return virtio_net_rsc_drain_flow(chain, nc, buf, size,
((hdr_len + sizeof(struct eth_header)) + 8),
VIRTIO_NET_IP6_ADDR_SIZE,
hdr_len + sizeof(struct eth_header)
+ sizeof(struct ip6_header));
}
return virtio_net_rsc_do_coalesce(chain, nc, buf, size, &unit);
}
static VirtioNetRscChain *virtio_net_rsc_lookup_chain(VirtIONet *n,
NetClientState *nc,
uint16_t proto)
{
VirtioNetRscChain *chain;
if ((proto != (uint16_t)ETH_P_IP) && (proto != (uint16_t)ETH_P_IPV6)) {
return NULL;
}
QTAILQ_FOREACH(chain, &n->rsc_chains, next) {
if (chain->proto == proto) {
return chain;
}
}
chain = g_malloc(sizeof(*chain));
chain->n = n;
chain->proto = proto;
if (proto == (uint16_t)ETH_P_IP) {
chain->max_payload = VIRTIO_NET_MAX_IP4_PAYLOAD;
chain->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
} else {
chain->max_payload = VIRTIO_NET_MAX_IP6_PAYLOAD;
chain->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
}
chain->drain_timer = timer_new_ns(QEMU_CLOCK_HOST,
virtio_net_rsc_purge, chain);
memset(&chain->stat, 0, sizeof(chain->stat));
QTAILQ_INIT(&chain->buffers);
QTAILQ_INSERT_TAIL(&n->rsc_chains, chain, next);
return chain;
}
static ssize_t virtio_net_rsc_receive(NetClientState *nc,
const uint8_t *buf,
size_t size)
{
uint16_t proto;
VirtioNetRscChain *chain;
struct eth_header *eth;
VirtIONet *n;
n = qemu_get_nic_opaque(nc);
if (size < (n->host_hdr_len + sizeof(struct eth_header))) {
return virtio_net_do_receive(nc, buf, size);
}
eth = (struct eth_header *)(buf + n->guest_hdr_len);
proto = htons(eth->h_proto);
chain = virtio_net_rsc_lookup_chain(n, nc, proto);
if (chain) {
chain->stat.received++;
if (proto == (uint16_t)ETH_P_IP && n->rsc4_enabled) {
return virtio_net_rsc_receive4(chain, nc, buf, size);
} else if (proto == (uint16_t)ETH_P_IPV6 && n->rsc6_enabled) {
return virtio_net_rsc_receive6(chain, nc, buf, size);
}
}
return virtio_net_do_receive(nc, buf, size);
}
static ssize_t virtio_net_receive(NetClientState *nc, const uint8_t *buf,
size_t size)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
if ((n->rsc4_enabled || n->rsc6_enabled)) {
return virtio_net_rsc_receive(nc, buf, size);
} else {
return virtio_net_do_receive(nc, buf, size);
}
}
static int32_t virtio_net_flush_tx(VirtIONetQueue *q);
static void virtio_net_tx_complete(NetClientState *nc, ssize_t len)
{
VirtIONet *n = qemu_get_nic_opaque(nc);
VirtIONetQueue *q = virtio_net_get_subqueue(nc);
VirtIODevice *vdev = VIRTIO_DEVICE(n);
virtio-net: fix bottom-half packet TX on asynchronous completion When virtio-net is used with the socket netdev backend, the backend can be busy and not able to collect new packets. In this case, net_socket_receive() returns 0 and registers a poll function to detect when the socket is ready again. In virtio_net_tx_bh(), virtio_net_flush_tx() forwards the 0, the virtio notifications are disabled and the function is not re-scheduled, waiting for the backend to be ready. When the socket netdev backend is again able to send packets, the poll function re-starts to flush remaining packets. This is done by calling virtio_net_tx_complete(). It re-enables notifications and calls again virtio_net_flush_tx(). But it seems if virtio_net_flush_tx() reaches the tx_burst value all the queue is not flushed and no new notification is sent to re-schedule virtio_net_tx_bh(). Nothing re-start to flush the queue and remaining packets are stuck in the queue. To fix that, detect in virtio_net_tx_complete() if virtio_net_flush_tx() has been stopped by tx_burst and if yes re-schedule the bottom half function virtio_net_tx_bh() to flush the remaining packets. This is what is done in virtio_net_tx_bh() when the virtio_net_flush_tx() is synchronous, and completly by-passed when the operation needs to be asynchronous. Fixes: a697a334b3c4 ("virtio-net: Introduce a new bottom half packet TX") Cc: alex.williamson@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-20 12:58:45 +03:00
int ret;
virtqueue_push(q->tx_vq, q->async_tx.elem, 0);
virtio_notify(vdev, q->tx_vq);
g_free(q->async_tx.elem);
q->async_tx.elem = NULL;
virtio_queue_set_notification(q->tx_vq, 1);
virtio-net: fix bottom-half packet TX on asynchronous completion When virtio-net is used with the socket netdev backend, the backend can be busy and not able to collect new packets. In this case, net_socket_receive() returns 0 and registers a poll function to detect when the socket is ready again. In virtio_net_tx_bh(), virtio_net_flush_tx() forwards the 0, the virtio notifications are disabled and the function is not re-scheduled, waiting for the backend to be ready. When the socket netdev backend is again able to send packets, the poll function re-starts to flush remaining packets. This is done by calling virtio_net_tx_complete(). It re-enables notifications and calls again virtio_net_flush_tx(). But it seems if virtio_net_flush_tx() reaches the tx_burst value all the queue is not flushed and no new notification is sent to re-schedule virtio_net_tx_bh(). Nothing re-start to flush the queue and remaining packets are stuck in the queue. To fix that, detect in virtio_net_tx_complete() if virtio_net_flush_tx() has been stopped by tx_burst and if yes re-schedule the bottom half function virtio_net_tx_bh() to flush the remaining packets. This is what is done in virtio_net_tx_bh() when the virtio_net_flush_tx() is synchronous, and completly by-passed when the operation needs to be asynchronous. Fixes: a697a334b3c4 ("virtio-net: Introduce a new bottom half packet TX") Cc: alex.williamson@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-20 12:58:45 +03:00
ret = virtio_net_flush_tx(q);
if (ret >= n->tx_burst) {
virtio-net: fix bottom-half packet TX on asynchronous completion When virtio-net is used with the socket netdev backend, the backend can be busy and not able to collect new packets. In this case, net_socket_receive() returns 0 and registers a poll function to detect when the socket is ready again. In virtio_net_tx_bh(), virtio_net_flush_tx() forwards the 0, the virtio notifications are disabled and the function is not re-scheduled, waiting for the backend to be ready. When the socket netdev backend is again able to send packets, the poll function re-starts to flush remaining packets. This is done by calling virtio_net_tx_complete(). It re-enables notifications and calls again virtio_net_flush_tx(). But it seems if virtio_net_flush_tx() reaches the tx_burst value all the queue is not flushed and no new notification is sent to re-schedule virtio_net_tx_bh(). Nothing re-start to flush the queue and remaining packets are stuck in the queue. To fix that, detect in virtio_net_tx_complete() if virtio_net_flush_tx() has been stopped by tx_burst and if yes re-schedule the bottom half function virtio_net_tx_bh() to flush the remaining packets. This is what is done in virtio_net_tx_bh() when the virtio_net_flush_tx() is synchronous, and completly by-passed when the operation needs to be asynchronous. Fixes: a697a334b3c4 ("virtio-net: Introduce a new bottom half packet TX") Cc: alex.williamson@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-20 12:58:45 +03:00
/*
* the flush has been stopped by tx_burst
* we will not receive notification for the
* remainining part, so re-schedule
*/
virtio_queue_set_notification(q->tx_vq, 0);
if (q->tx_bh) {
qemu_bh_schedule(q->tx_bh);
} else {
timer_mod(q->tx_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + n->tx_timeout);
}
virtio-net: fix bottom-half packet TX on asynchronous completion When virtio-net is used with the socket netdev backend, the backend can be busy and not able to collect new packets. In this case, net_socket_receive() returns 0 and registers a poll function to detect when the socket is ready again. In virtio_net_tx_bh(), virtio_net_flush_tx() forwards the 0, the virtio notifications are disabled and the function is not re-scheduled, waiting for the backend to be ready. When the socket netdev backend is again able to send packets, the poll function re-starts to flush remaining packets. This is done by calling virtio_net_tx_complete(). It re-enables notifications and calls again virtio_net_flush_tx(). But it seems if virtio_net_flush_tx() reaches the tx_burst value all the queue is not flushed and no new notification is sent to re-schedule virtio_net_tx_bh(). Nothing re-start to flush the queue and remaining packets are stuck in the queue. To fix that, detect in virtio_net_tx_complete() if virtio_net_flush_tx() has been stopped by tx_burst and if yes re-schedule the bottom half function virtio_net_tx_bh() to flush the remaining packets. This is what is done in virtio_net_tx_bh() when the virtio_net_flush_tx() is synchronous, and completly by-passed when the operation needs to be asynchronous. Fixes: a697a334b3c4 ("virtio-net: Introduce a new bottom half packet TX") Cc: alex.williamson@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-20 12:58:45 +03:00
q->tx_waiting = 1;
}
}
/* TX */
static int32_t virtio_net_flush_tx(VirtIONetQueue *q)
{
VirtIONet *n = q->n;
VirtIODevice *vdev = VIRTIO_DEVICE(n);
VirtQueueElement *elem;
int32_t num_packets = 0;
int queue_index = vq2q(virtio_get_queue_index(q->tx_vq));
if (!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK)) {
return num_packets;
}
if (q->async_tx.elem) {
virtio_queue_set_notification(q->tx_vq, 0);
return num_packets;
}
for (;;) {
ssize_t ret;
unsigned int out_num;
struct iovec sg[VIRTQUEUE_MAX_SIZE], sg2[VIRTQUEUE_MAX_SIZE + 1], *out_sg;
struct virtio_net_hdr_mrg_rxbuf mhdr;
elem = virtqueue_pop(q->tx_vq, sizeof(VirtQueueElement));
if (!elem) {
break;
}
out_num = elem->out_num;
out_sg = elem->out_sg;
if (out_num < 1) {
virtio_error(vdev, "virtio-net header not in first element");
virtqueue_detach_element(q->tx_vq, elem, 0);
g_free(elem);
return -EINVAL;
}
if (n->has_vnet_hdr) {
if (iov_to_buf(out_sg, out_num, 0, &mhdr, n->guest_hdr_len) <
n->guest_hdr_len) {
virtio_error(vdev, "virtio-net header incorrect");
virtqueue_detach_element(q->tx_vq, elem, 0);
g_free(elem);
return -EINVAL;
}
if (n->needs_vnet_hdr_swap) {
virtio_net_hdr_swap(vdev, (void *) &mhdr);
sg2[0].iov_base = &mhdr;
sg2[0].iov_len = n->guest_hdr_len;
out_num = iov_copy(&sg2[1], ARRAY_SIZE(sg2) - 1,
out_sg, out_num,
n->guest_hdr_len, -1);
if (out_num == VIRTQUEUE_MAX_SIZE) {
goto drop;
avoid TABs in files that only contain a few Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14 01:37:37 +03:00
}
out_num += 1;
out_sg = sg2;
avoid TABs in files that only contain a few Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14 01:37:37 +03:00
}
}
/*
* If host wants to see the guest header as is, we can
* pass it on unchanged. Otherwise, copy just the parts
* that host is interested in.
*/
assert(n->host_hdr_len <= n->guest_hdr_len);
if (n->host_hdr_len != n->guest_hdr_len) {
unsigned sg_num = iov_copy(sg, ARRAY_SIZE(sg),
out_sg, out_num,
0, n->host_hdr_len);
sg_num += iov_copy(sg + sg_num, ARRAY_SIZE(sg) - sg_num,
out_sg, out_num,
n->guest_hdr_len, -1);
out_num = sg_num;
out_sg = sg;
}
ret = qemu_sendv_packet_async(qemu_get_subqueue(n->nic, queue_index),
out_sg, out_num, virtio_net_tx_complete);
if (ret == 0) {
virtio_queue_set_notification(q->tx_vq, 0);
q->async_tx.elem = elem;
return -EBUSY;
}
drop:
virtqueue_push(q->tx_vq, elem, 0);
virtio_notify(vdev, q->tx_vq);
g_free(elem);
if (++num_packets >= n->tx_burst) {
break;
}
}
return num_packets;
}
static void virtio_net_tx_timer(void *opaque);
static void virtio_net_handle_tx_timer(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIONet *n = VIRTIO_NET(vdev);
VirtIONetQueue *q = &n->vqs[vq2q(virtio_get_queue_index(vq))];
if (unlikely((n->status & VIRTIO_NET_S_LINK_UP) == 0)) {
virtio_net_drop_tx_queue_data(vdev, vq);
return;
}
/* This happens when device was stopped but VCPU wasn't. */
if (!vdev->vm_running) {
q->tx_waiting = 1;
return;
}
if (q->tx_waiting) {
/* We already have queued packets, immediately flush */
timer_del(q->tx_timer);
virtio_net_tx_timer(q);
} else {
/* re-arm timer to flush it (and more) on next tick */
timer_mod(q->tx_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + n->tx_timeout);
q->tx_waiting = 1;
virtio_queue_set_notification(vq, 0);
}
}
static void virtio_net_handle_tx_bh(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIONet *n = VIRTIO_NET(vdev);
VirtIONetQueue *q = &n->vqs[vq2q(virtio_get_queue_index(vq))];
if (unlikely((n->status & VIRTIO_NET_S_LINK_UP) == 0)) {
virtio_net_drop_tx_queue_data(vdev, vq);
return;
}
if (unlikely(q->tx_waiting)) {
return;
}
q->tx_waiting = 1;
/* This happens when device was stopped but VCPU wasn't. */
if (!vdev->vm_running) {
return;
}
virtio_queue_set_notification(vq, 0);
qemu_bh_schedule(q->tx_bh);
}
static void virtio_net_tx_timer(void *opaque)
{
VirtIONetQueue *q = opaque;
VirtIONet *n = q->n;
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int ret;
/* This happens when device was stopped but BH wasn't. */
if (!vdev->vm_running) {
/* Make sure tx waiting is set, so we'll run when restarted. */
assert(q->tx_waiting);
return;
}
q->tx_waiting = 0;
/* Just in case the driver is not ready on more */
if (!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK)) {
return;
}
ret = virtio_net_flush_tx(q);
if (ret == -EBUSY || ret == -EINVAL) {
return;
}
/*
* If we flush a full burst of packets, assume there are
* more coming and immediately rearm
*/
if (ret >= n->tx_burst) {
q->tx_waiting = 1;
timer_mod(q->tx_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + n->tx_timeout);
return;
}
/*
* If less than a full burst, re-enable notification and flush
* anything that may have come in while we weren't looking. If
* we find something, assume the guest is still active and rearm
*/
virtio_queue_set_notification(q->tx_vq, 1);
ret = virtio_net_flush_tx(q);
if (ret > 0) {
virtio_queue_set_notification(q->tx_vq, 0);
q->tx_waiting = 1;
timer_mod(q->tx_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + n->tx_timeout);
}
}
static void virtio_net_tx_bh(void *opaque)
{
VirtIONetQueue *q = opaque;
VirtIONet *n = q->n;
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int32_t ret;
/* This happens when device was stopped but BH wasn't. */
if (!vdev->vm_running) {
/* Make sure tx waiting is set, so we'll run when restarted. */
assert(q->tx_waiting);
return;
}
q->tx_waiting = 0;
/* Just in case the driver is not ready on more */
if (unlikely(!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK))) {
return;
}
ret = virtio_net_flush_tx(q);
if (ret == -EBUSY || ret == -EINVAL) {
return; /* Notification re-enable handled by tx_complete or device
* broken */
}
/* If we flush a full burst of packets, assume there are
* more coming and immediately reschedule */
if (ret >= n->tx_burst) {
qemu_bh_schedule(q->tx_bh);
q->tx_waiting = 1;
return;
}
/* If less than a full burst, re-enable notification and flush
* anything that may have come in while we weren't looking. If
* we find something, assume the guest is still active and reschedule */
virtio_queue_set_notification(q->tx_vq, 1);
ret = virtio_net_flush_tx(q);
if (ret == -EINVAL) {
return;
} else if (ret > 0) {
virtio_queue_set_notification(q->tx_vq, 0);
qemu_bh_schedule(q->tx_bh);
q->tx_waiting = 1;
}
}
static void virtio_net_add_queue(VirtIONet *n, int index)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
n->vqs[index].rx_vq = virtio_add_queue(vdev, n->net_conf.rx_queue_size,
virtio_net_handle_rx);
if (n->net_conf.tx && !strcmp(n->net_conf.tx, "timer")) {
n->vqs[index].tx_vq =
virtio_add_queue(vdev, n->net_conf.tx_queue_size,
virtio_net_handle_tx_timer);
n->vqs[index].tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
virtio_net_tx_timer,
&n->vqs[index]);
} else {
n->vqs[index].tx_vq =
virtio_add_queue(vdev, n->net_conf.tx_queue_size,
virtio_net_handle_tx_bh);
n->vqs[index].tx_bh = qemu_bh_new_guarded(virtio_net_tx_bh, &n->vqs[index],
&DEVICE(vdev)->mem_reentrancy_guard);
}
n->vqs[index].tx_waiting = 0;
n->vqs[index].n = n;
}
static void virtio_net_del_queue(VirtIONet *n, int index)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
VirtIONetQueue *q = &n->vqs[index];
NetClientState *nc = qemu_get_subqueue(n->nic, index);
qemu_purge_queued_packets(nc);
virtio_del_queue(vdev, index * 2);
if (q->tx_timer) {
timer_free(q->tx_timer);
q->tx_timer = NULL;
} else {
qemu_bh_delete(q->tx_bh);
q->tx_bh = NULL;
}
q->tx_waiting = 0;
virtio_del_queue(vdev, index * 2 + 1);
}
static void virtio_net_change_num_queue_pairs(VirtIONet *n, int new_max_queue_pairs)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int old_num_queues = virtio_get_num_queues(vdev);
int new_num_queues = new_max_queue_pairs * 2 + 1;
int i;
assert(old_num_queues >= 3);
assert(old_num_queues % 2 == 1);
if (old_num_queues == new_num_queues) {
return;
}
/*
* We always need to remove and add ctrl vq if
* old_num_queues != new_num_queues. Remove ctrl_vq first,
* and then we only enter one of the following two loops.
*/
virtio_del_queue(vdev, old_num_queues - 1);
for (i = new_num_queues - 1; i < old_num_queues - 1; i += 2) {
/* new_num_queues < old_num_queues */
virtio_net_del_queue(n, i / 2);
}
for (i = old_num_queues - 1; i < new_num_queues - 1; i += 2) {
/* new_num_queues > old_num_queues */
virtio_net_add_queue(n, i / 2);
}
/* add ctrl_vq last */
n->ctrl_vq = virtio_add_queue(vdev, 64, virtio_net_handle_ctrl);
}
static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
{
int max = multiqueue ? n->max_queue_pairs : 1;
n->multiqueue = multiqueue;
virtio_net_change_num_queue_pairs(n, max);
virtio_net_set_queue_pairs(n);
}
static int virtio_net_post_load_device(void *opaque, int version_id)
{
VirtIONet *n = opaque;
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int i, link_down;
trace_virtio_net_post_load_device();
virtio_net_set_mrg_rx_bufs(n, n->mergeable_rx_bufs,
virtio_vdev_has_feature(vdev,
VIRTIO_F_VERSION_1),
virtio_vdev_has_feature(vdev,
VIRTIO_NET_F_HASH_REPORT));
/* MAC_TABLE_ENTRIES may be different from the saved image */
if (n->mac_table.in_use > MAC_TABLE_ENTRIES) {
n->mac_table.in_use = 0;
}
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
n->curr_guest_offloads = virtio_net_supported_guest_offloads(n);
}
virtio-net: prevent offloads reset on migration Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command are not preserved on VM migration. Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES) get enabled. What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads are getting set correctly: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334 #3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:168 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 However later on the features are getting restored, and offloads get reset to everything supported by features: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773 #3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 Fix this by preserving the state in saved_guest_offloads field and pushing out offload initialization to the new post load hook. Cc: qemu-stable@nongnu.org Signed-off-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-11 16:58:04 +03:00
/*
* curr_guest_offloads will be later overwritten by the
* virtio_set_features_nocheck call done from the virtio_load.
* Here we make sure it is preserved and restored accordingly
* in the virtio_net_post_load_virtio callback.
*/
n->saved_guest_offloads = n->curr_guest_offloads;
virtio_net_set_queue_pairs(n);
/* Find the first multicast entry in the saved MAC filter */
for (i = 0; i < n->mac_table.in_use; i++) {
if (n->mac_table.macs[i * ETH_ALEN] & 1) {
break;
}
}
n->mac_table.first_multi = i;
/* nc.link_down can't be migrated, so infer link_down according
* to link status bit in n->status */
link_down = (n->status & VIRTIO_NET_S_LINK_UP) == 0;
for (i = 0; i < n->max_queue_pairs; i++) {
qemu_get_subqueue(n->nic, i)->link_down = link_down;
}
if (virtio_vdev_has_feature(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE) &&
virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ)) {
qemu_announce_timer_reset(&n->announce_timer, migrate_announce_params(),
QEMU_CLOCK_VIRTUAL,
virtio_net_announce_timer, n);
if (n->announce_timer.round) {
timer_mod(n->announce_timer.tm,
qemu_clock_get_ms(n->announce_timer.type));
} else {
qemu_announce_timer_del(&n->announce_timer, false);
}
}
if (n->rss_data.enabled) {
n->rss_data.enabled_software_rss = n->rss_data.populate_hash;
if (!n->rss_data.populate_hash) {
if (!virtio_net_attach_epbf_rss(n)) {
if (get_vhost_net(qemu_get_queue(n->nic)->peer)) {
warn_report("Can't post-load eBPF RSS for vhost");
} else {
warn_report("Can't post-load eBPF RSS - "
"fallback to software RSS");
n->rss_data.enabled_software_rss = true;
}
}
}
trace_virtio_net_rss_enable(n->rss_data.hash_types,
n->rss_data.indirections_len,
sizeof(n->rss_data.key));
} else {
trace_virtio_net_rss_disable();
}
return 0;
}
virtio-net: prevent offloads reset on migration Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command are not preserved on VM migration. Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES) get enabled. What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads are getting set correctly: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334 #3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:168 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 However later on the features are getting restored, and offloads get reset to everything supported by features: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773 #3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 Fix this by preserving the state in saved_guest_offloads field and pushing out offload initialization to the new post load hook. Cc: qemu-stable@nongnu.org Signed-off-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-11 16:58:04 +03:00
static int virtio_net_post_load_virtio(VirtIODevice *vdev)
{
VirtIONet *n = VIRTIO_NET(vdev);
/*
* The actual needed state is now in saved_guest_offloads,
* see virtio_net_post_load_device for detail.
* Restore it back and apply the desired offloads.
*/
n->curr_guest_offloads = n->saved_guest_offloads;
if (peer_has_vnet_hdr(n)) {
virtio_net_apply_guest_offloads(n);
}
return 0;
}
/* tx_waiting field of a VirtIONetQueue */
static const VMStateDescription vmstate_virtio_net_queue_tx_waiting = {
.name = "virtio-net-queue-tx_waiting",
.fields = (VMStateField[]) {
VMSTATE_UINT32(tx_waiting, VirtIONetQueue),
VMSTATE_END_OF_LIST()
},
};
static bool max_queue_pairs_gt_1(void *opaque, int version_id)
{
return VIRTIO_NET(opaque)->max_queue_pairs > 1;
}
static bool has_ctrl_guest_offloads(void *opaque, int version_id)
{
return virtio_vdev_has_feature(VIRTIO_DEVICE(opaque),
VIRTIO_NET_F_CTRL_GUEST_OFFLOADS);
}
static bool mac_table_fits(void *opaque, int version_id)
{
return VIRTIO_NET(opaque)->mac_table.in_use <= MAC_TABLE_ENTRIES;
}
static bool mac_table_doesnt_fit(void *opaque, int version_id)
{
return !mac_table_fits(opaque, version_id);
}
/* This temporary type is shared by all the WITH_TMP methods
* although only some fields are used by each.
*/
struct VirtIONetMigTmp {
VirtIONet *parent;
VirtIONetQueue *vqs_1;
uint16_t curr_queue_pairs_1;
uint8_t has_ufo;
uint32_t has_vnet_hdr;
};
/* The 2nd and subsequent tx_waiting flags are loaded later than
* the 1st entry in the queue_pairs and only if there's more than one
* entry. We use the tmp mechanism to calculate a temporary
* pointer and count and also validate the count.
*/
static int virtio_net_tx_waiting_pre_save(void *opaque)
{
struct VirtIONetMigTmp *tmp = opaque;
tmp->vqs_1 = tmp->parent->vqs + 1;
tmp->curr_queue_pairs_1 = tmp->parent->curr_queue_pairs - 1;
if (tmp->parent->curr_queue_pairs == 0) {
tmp->curr_queue_pairs_1 = 0;
}
return 0;
}
static int virtio_net_tx_waiting_pre_load(void *opaque)
{
struct VirtIONetMigTmp *tmp = opaque;
/* Reuse the pointer setup from save */
virtio_net_tx_waiting_pre_save(opaque);
if (tmp->parent->curr_queue_pairs > tmp->parent->max_queue_pairs) {
error_report("virtio-net: curr_queue_pairs %x > max_queue_pairs %x",
tmp->parent->curr_queue_pairs, tmp->parent->max_queue_pairs);
return -EINVAL;
}
return 0; /* all good */
}
static const VMStateDescription vmstate_virtio_net_tx_waiting = {
.name = "virtio-net-tx_waiting",
.pre_load = virtio_net_tx_waiting_pre_load,
.pre_save = virtio_net_tx_waiting_pre_save,
.fields = (VMStateField[]) {
VMSTATE_STRUCT_VARRAY_POINTER_UINT16(vqs_1, struct VirtIONetMigTmp,
curr_queue_pairs_1,
vmstate_virtio_net_queue_tx_waiting,
struct VirtIONetQueue),
VMSTATE_END_OF_LIST()
},
};
/* the 'has_ufo' flag is just tested; if the incoming stream has the
* flag set we need to check that we have it
*/
static int virtio_net_ufo_post_load(void *opaque, int version_id)
{
struct VirtIONetMigTmp *tmp = opaque;
if (tmp->has_ufo && !peer_has_ufo(tmp->parent)) {
error_report("virtio-net: saved image requires TUN_F_UFO support");
return -EINVAL;
}
return 0;
}
static int virtio_net_ufo_pre_save(void *opaque)
{
struct VirtIONetMigTmp *tmp = opaque;
tmp->has_ufo = tmp->parent->has_ufo;
return 0;
}
static const VMStateDescription vmstate_virtio_net_has_ufo = {
.name = "virtio-net-ufo",
.post_load = virtio_net_ufo_post_load,
.pre_save = virtio_net_ufo_pre_save,
.fields = (VMStateField[]) {
VMSTATE_UINT8(has_ufo, struct VirtIONetMigTmp),
VMSTATE_END_OF_LIST()
},
};
/* the 'has_vnet_hdr' flag is just tested; if the incoming stream has the
* flag set we need to check that we have it
*/
static int virtio_net_vnet_post_load(void *opaque, int version_id)
{
struct VirtIONetMigTmp *tmp = opaque;
if (tmp->has_vnet_hdr && !peer_has_vnet_hdr(tmp->parent)) {
error_report("virtio-net: saved image requires vnet_hdr=on");
return -EINVAL;
}
return 0;
}
static int virtio_net_vnet_pre_save(void *opaque)
{
struct VirtIONetMigTmp *tmp = opaque;
tmp->has_vnet_hdr = tmp->parent->has_vnet_hdr;
return 0;
}
static const VMStateDescription vmstate_virtio_net_has_vnet = {
.name = "virtio-net-vnet",
.post_load = virtio_net_vnet_post_load,
.pre_save = virtio_net_vnet_pre_save,
.fields = (VMStateField[]) {
VMSTATE_UINT32(has_vnet_hdr, struct VirtIONetMigTmp),
VMSTATE_END_OF_LIST()
},
};
static bool virtio_net_rss_needed(void *opaque)
{
return VIRTIO_NET(opaque)->rss_data.enabled;
}
static const VMStateDescription vmstate_virtio_net_rss = {
.name = "virtio-net-device/rss",
.version_id = 1,
.minimum_version_id = 1,
.needed = virtio_net_rss_needed,
.fields = (VMStateField[]) {
VMSTATE_BOOL(rss_data.enabled, VirtIONet),
VMSTATE_BOOL(rss_data.redirect, VirtIONet),
VMSTATE_BOOL(rss_data.populate_hash, VirtIONet),
VMSTATE_UINT32(rss_data.hash_types, VirtIONet),
VMSTATE_UINT16(rss_data.indirections_len, VirtIONet),
VMSTATE_UINT16(rss_data.default_queue, VirtIONet),
VMSTATE_UINT8_ARRAY(rss_data.key, VirtIONet,
VIRTIO_NET_RSS_MAX_KEY_SIZE),
VMSTATE_VARRAY_UINT16_ALLOC(rss_data.indirections_table, VirtIONet,
rss_data.indirections_len, 0,
vmstate_info_uint16, uint16_t),
VMSTATE_END_OF_LIST()
},
};
static const VMStateDescription vmstate_virtio_net_device = {
.name = "virtio-net-device",
.version_id = VIRTIO_NET_VM_VERSION,
.minimum_version_id = VIRTIO_NET_VM_VERSION,
.post_load = virtio_net_post_load_device,
.fields = (VMStateField[]) {
VMSTATE_UINT8_ARRAY(mac, VirtIONet, ETH_ALEN),
VMSTATE_STRUCT_POINTER(vqs, VirtIONet,
vmstate_virtio_net_queue_tx_waiting,
VirtIONetQueue),
VMSTATE_UINT32(mergeable_rx_bufs, VirtIONet),
VMSTATE_UINT16(status, VirtIONet),
VMSTATE_UINT8(promisc, VirtIONet),
VMSTATE_UINT8(allmulti, VirtIONet),
VMSTATE_UINT32(mac_table.in_use, VirtIONet),
/* Guarded pair: If it fits we load it, else we throw it away
* - can happen if source has a larger MAC table.; post-load
* sets flags in this case.
*/
VMSTATE_VBUFFER_MULTIPLY(mac_table.macs, VirtIONet,
0, mac_table_fits, mac_table.in_use,
ETH_ALEN),
VMSTATE_UNUSED_VARRAY_UINT32(VirtIONet, mac_table_doesnt_fit, 0,
mac_table.in_use, ETH_ALEN),
/* Note: This is an array of uint32's that's always been saved as a
* buffer; hold onto your endiannesses; it's actually used as a bitmap
* but based on the uint.
*/
VMSTATE_BUFFER_POINTER_UNSAFE(vlans, VirtIONet, 0, MAX_VLAN >> 3),
VMSTATE_WITH_TMP(VirtIONet, struct VirtIONetMigTmp,
vmstate_virtio_net_has_vnet),
VMSTATE_UINT8(mac_table.multi_overflow, VirtIONet),
VMSTATE_UINT8(mac_table.uni_overflow, VirtIONet),
VMSTATE_UINT8(alluni, VirtIONet),
VMSTATE_UINT8(nomulti, VirtIONet),
VMSTATE_UINT8(nouni, VirtIONet),
VMSTATE_UINT8(nobcast, VirtIONet),
VMSTATE_WITH_TMP(VirtIONet, struct VirtIONetMigTmp,
vmstate_virtio_net_has_ufo),
VMSTATE_SINGLE_TEST(max_queue_pairs, VirtIONet, max_queue_pairs_gt_1, 0,
vmstate_info_uint16_equal, uint16_t),
VMSTATE_UINT16_TEST(curr_queue_pairs, VirtIONet, max_queue_pairs_gt_1),
VMSTATE_WITH_TMP(VirtIONet, struct VirtIONetMigTmp,
vmstate_virtio_net_tx_waiting),
VMSTATE_UINT64_TEST(curr_guest_offloads, VirtIONet,
has_ctrl_guest_offloads),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * []) {
&vmstate_virtio_net_rss,
NULL
}
};
static NetClientInfo net_virtio_info = {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
.type = NET_CLIENT_DRIVER_NIC,
.size = sizeof(NICState),
.can_receive = virtio_net_can_receive,
.receive = virtio_net_receive,
.link_status_changed = virtio_net_set_link_status,
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
.query_rx_filter = virtio_net_query_rxfilter,
.announce = virtio_net_announce,
};
static bool virtio_net_guest_notifier_pending(VirtIODevice *vdev, int idx)
{
VirtIONet *n = VIRTIO_NET(vdev);
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa With MQ enabled vdpa device and non-MQ supporting guest e.g. booting vdpa with mq=on over OVMF of single vqp, below assert failure is seen: ../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed. 0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6 1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6 2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6 3 0x00007f8ce3fec252 in () at /lib64/libc.so.6 4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563 5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558 6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557 7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false) at ../hw/virtio/virtio-pci.c:974 8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019 9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:361 10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289 11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370 12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945 13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292 14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...) at ../softmmu/memory.c:492 15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554 16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at ../softmmu/memory.c:1504 17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165 18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822 19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>) at ../softmmu/physmem.c:2914 20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924 21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903 22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49 23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556 24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0 25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6 The cause for the assert failure is due to that the vhost_dev index for the ctrl vq was not aligned with actual one in use by the guest. Upon multiqueue feature negotiation in virtio_net_set_multiqueue(), if guest doesn't support multiqueue, the guest vq layout would shrink to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl). This results in ctrl_vq taking a different vhost_dev group index than the default. We can map vq to the correct vhost_dev group by checking if MQ is supported by guest and successfully negotiated. Since the MQ feature is only present along with CTRL_VQ, we ensure the index 2 is only meant for the control vq while MQ is not supported by guest. Fixes: 22288fe ("virtio-net: vhost control virtqueue support") Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:13 +03:00
NetClientState *nc;
assert(n->vhost_started);
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa With MQ enabled vdpa device and non-MQ supporting guest e.g. booting vdpa with mq=on over OVMF of single vqp, below assert failure is seen: ../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed. 0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6 1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6 2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6 3 0x00007f8ce3fec252 in () at /lib64/libc.so.6 4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563 5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558 6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557 7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false) at ../hw/virtio/virtio-pci.c:974 8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019 9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:361 10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289 11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370 12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945 13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292 14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...) at ../softmmu/memory.c:492 15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554 16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at ../softmmu/memory.c:1504 17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165 18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822 19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>) at ../softmmu/physmem.c:2914 20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924 21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903 22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49 23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556 24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0 25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6 The cause for the assert failure is due to that the vhost_dev index for the ctrl vq was not aligned with actual one in use by the guest. Upon multiqueue feature negotiation in virtio_net_set_multiqueue(), if guest doesn't support multiqueue, the guest vq layout would shrink to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl). This results in ctrl_vq taking a different vhost_dev group index than the default. We can map vq to the correct vhost_dev group by checking if MQ is supported by guest and successfully negotiated. Since the MQ feature is only present along with CTRL_VQ, we ensure the index 2 is only meant for the control vq while MQ is not supported by guest. Fixes: 22288fe ("virtio-net: vhost control virtqueue support") Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:13 +03:00
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_MQ) && idx == 2) {
/* Must guard against invalid features and bogus queue index
* from being set by malicious guest, or penetrated through
* buggy migration stream.
*/
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: bogus vq index ignored\n", __func__);
return false;
}
nc = qemu_get_subqueue(n->nic, n->max_queue_pairs);
} else {
nc = qemu_get_subqueue(n->nic, vq2q(idx));
}
/*
* Add the check for configure interrupt, Use VIRTIO_CONFIG_IRQ_IDX -1
* as the Marco of configure interrupt's IDX, If this driver does not
* support, the function will return false
*/
if (idx == VIRTIO_CONFIG_IRQ_IDX) {
return vhost_net_config_pending(get_vhost_net(nc->peer));
}
return vhost_net_virtqueue_pending(get_vhost_net(nc->peer), idx);
}
static void virtio_net_guest_notifier_mask(VirtIODevice *vdev, int idx,
bool mask)
{
VirtIONet *n = VIRTIO_NET(vdev);
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa With MQ enabled vdpa device and non-MQ supporting guest e.g. booting vdpa with mq=on over OVMF of single vqp, below assert failure is seen: ../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed. 0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6 1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6 2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6 3 0x00007f8ce3fec252 in () at /lib64/libc.so.6 4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563 5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558 6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557 7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false) at ../hw/virtio/virtio-pci.c:974 8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019 9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:361 10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289 11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370 12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945 13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292 14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...) at ../softmmu/memory.c:492 15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554 16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at ../softmmu/memory.c:1504 17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165 18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822 19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>) at ../softmmu/physmem.c:2914 20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924 21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903 22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49 23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556 24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0 25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6 The cause for the assert failure is due to that the vhost_dev index for the ctrl vq was not aligned with actual one in use by the guest. Upon multiqueue feature negotiation in virtio_net_set_multiqueue(), if guest doesn't support multiqueue, the guest vq layout would shrink to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl). This results in ctrl_vq taking a different vhost_dev group index than the default. We can map vq to the correct vhost_dev group by checking if MQ is supported by guest and successfully negotiated. Since the MQ feature is only present along with CTRL_VQ, we ensure the index 2 is only meant for the control vq while MQ is not supported by guest. Fixes: 22288fe ("virtio-net: vhost control virtqueue support") Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:13 +03:00
NetClientState *nc;
assert(n->vhost_started);
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa With MQ enabled vdpa device and non-MQ supporting guest e.g. booting vdpa with mq=on over OVMF of single vqp, below assert failure is seen: ../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed. 0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6 1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6 2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6 3 0x00007f8ce3fec252 in () at /lib64/libc.so.6 4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563 5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558 6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557 7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false) at ../hw/virtio/virtio-pci.c:974 8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019 9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:361 10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289 11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370 12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945 13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292 14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...) at ../softmmu/memory.c:492 15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554 16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at ../softmmu/memory.c:1504 17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165 18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822 19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>) at ../softmmu/physmem.c:2914 20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924 21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903 22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49 23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556 24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0 25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6 The cause for the assert failure is due to that the vhost_dev index for the ctrl vq was not aligned with actual one in use by the guest. Upon multiqueue feature negotiation in virtio_net_set_multiqueue(), if guest doesn't support multiqueue, the guest vq layout would shrink to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl). This results in ctrl_vq taking a different vhost_dev group index than the default. We can map vq to the correct vhost_dev group by checking if MQ is supported by guest and successfully negotiated. Since the MQ feature is only present along with CTRL_VQ, we ensure the index 2 is only meant for the control vq while MQ is not supported by guest. Fixes: 22288fe ("virtio-net: vhost control virtqueue support") Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-07 05:28:13 +03:00
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_MQ) && idx == 2) {
/* Must guard against invalid features and bogus queue index
* from being set by malicious guest, or penetrated through
* buggy migration stream.
*/
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: bogus vq index ignored\n", __func__);
return;
}
nc = qemu_get_subqueue(n->nic, n->max_queue_pairs);
} else {
nc = qemu_get_subqueue(n->nic, vq2q(idx));
}
/*
*Add the check for configure interrupt, Use VIRTIO_CONFIG_IRQ_IDX -1
* as the Marco of configure interrupt's IDX, If this driver does not
* support, the function will return
*/
if (idx == VIRTIO_CONFIG_IRQ_IDX) {
vhost_net_config_mask(get_vhost_net(nc->peer), vdev, mask);
return;
}
vhost_net_virtqueue_mask(get_vhost_net(nc->peer), vdev, idx, mask);
}
static void virtio_net_set_config_size(VirtIONet *n, uint64_t host_features)
{
virtio_add_feature(&host_features, VIRTIO_NET_F_MAC);
virtio: introduce VirtIOConfigSizeParams & virtio_get_config_size This is the first step towards moving all device config size calculation logic into the virtio core code. In particular, this adds a struct that contains all the necessary information for common virtio code to be able to calculate the final config size for a device. This is expected to be used with the new virtio_get_config_size helper, which calculates the final length based on the provided host features. This builds on top of already existing code like VirtIOFeature and virtio_feature_get_config_size(), but adds additional fields, as well as sanity checking so that device-specifc code doesn't have to duplicate it. An example usage would be: static const VirtIOFeature dev_features[] = { {.flags = 1ULL << FEATURE_1_BIT, .end = endof(struct virtio_dev_config, feature_1)}, {.flags = 1ULL << FEATURE_2_BIT, .end = endof(struct virtio_dev_config, feature_2)}, {} }; static const VirtIOConfigSizeParams dev_cfg_size_params = { .min_size = DEV_BASE_CONFIG_SIZE, .max_size = sizeof(struct virtio_dev_config), .feature_sizes = dev_features }; // code inside my_dev_device_realize() size_t config_size = virtio_get_config_size(&dev_cfg_size_params, host_features); virtio_init(vdev, VIRTIO_ID_MYDEV, config_size); Currently every device is expected to write its own boilerplate from the example above in device_realize(), however, the next step of this transition is moving VirtIOConfigSizeParams into VirtioDeviceClass, so that it can be done automatically by the virtio initialization code. All of the users of virtio_feature_get_config_size have been converted to use virtio_get_config_size so it's no longer needed and is removed with this commit. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-09-06 10:31:07 +03:00
n->config_size = virtio_get_config_size(&cfg_size_params, host_features);
}
void virtio_net_set_netclient_name(VirtIONet *n, const char *name,
const char *type)
{
/*
* The name can be NULL, the netclient name will be type.x.
*/
assert(type != NULL);
g_free(n->netclient_name);
g_free(n->netclient_type);
n->netclient_name = g_strdup(name);
n->netclient_type = g_strdup(type);
}
static bool failover_unplug_primary(VirtIONet *n, DeviceState *dev)
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
{
HotplugHandler *hotplug_ctrl;
PCIDevice *pci_dev;
Error *err = NULL;
hotplug_ctrl = qdev_get_hotplug_handler(dev);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (hotplug_ctrl) {
pci_dev = PCI_DEVICE(dev);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
pci_dev->partially_hotplugged = true;
hotplug_handler_unplug_request(hotplug_ctrl, dev, &err);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (err) {
error_report_err(err);
return false;
}
} else {
return false;
}
return true;
}
static bool failover_replug_primary(VirtIONet *n, DeviceState *dev,
Error **errp)
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
{
Error *err = NULL;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
HotplugHandler *hotplug_ctrl;
PCIDevice *pdev = PCI_DEVICE(dev);
BusState *primary_bus;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (!pdev->partially_hotplugged) {
return true;
}
primary_bus = dev->parent_bus;
if (!primary_bus) {
error_setg(errp, "virtio_net: couldn't find primary bus");
return false;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
qdev_set_parent_bus(dev, primary_bus, &error_abort);
qatomic_set(&n->failover_primary_hidden, false);
hotplug_ctrl = qdev_get_hotplug_handler(dev);
if (hotplug_ctrl) {
hotplug_handler_pre_plug(hotplug_ctrl, dev, &err);
if (err) {
goto out;
}
hotplug_handler_plug(hotplug_ctrl, dev, &err);
}
pdev->partially_hotplugged = false;
out:
error_propagate(errp, err);
return !err;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
static void virtio_net_handle_migration_primary(VirtIONet *n, MigrationState *s)
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
{
bool should_be_hidden;
Error *err = NULL;
DeviceState *dev = failover_find_primary_device(n);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (!dev) {
return;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
should_be_hidden = qatomic_read(&n->failover_primary_hidden);
if (migration_in_setup(s) && !should_be_hidden) {
if (failover_unplug_primary(n, dev)) {
vmstate_unregister(VMSTATE_IF(dev), qdev_get_vmsd(dev), dev);
qapi_event_send_unplug_primary(dev->id);
qatomic_set(&n->failover_primary_hidden, true);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
} else {
warn_report("couldn't unplug primary device");
}
} else if (migration_has_failed(s)) {
/* We already unplugged the device let's plug it back */
if (!failover_replug_primary(n, dev, &err)) {
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (err) {
error_report_err(err);
}
}
}
}
static void virtio_net_migration_state_notifier(Notifier *notifier, void *data)
{
MigrationState *s = data;
VirtIONet *n = container_of(notifier, VirtIONet, migration_state);
virtio_net_handle_migration_primary(n, s);
}
static bool failover_hide_primary_device(DeviceListener *listener,
const QDict *device_opts,
bool from_json,
Error **errp)
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
{
VirtIONet *n = container_of(listener, VirtIONet, primary_listener);
const char *standby_id;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (!device_opts) {
return false;
}
if (!qdict_haskey(device_opts, "failover_pair_id")) {
return false;
}
if (!qdict_haskey(device_opts, "id")) {
error_setg(errp, "Device with failover_pair_id needs to have id");
return false;
}
standby_id = qdict_get_str(device_opts, "failover_pair_id");
if (g_strcmp0(standby_id, n->netclient_name) != 0) {
return false;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
/*
* The hide helper can be called several times for a given device.
* Check there is only one primary for a virtio-net device but
* don't duplicate the qdict several times if it's called for the same
* device.
*/
if (n->primary_opts) {
const char *old, *new;
/* devices with failover_pair_id always have an id */
old = qdict_get_str(n->primary_opts, "id");
new = qdict_get_str(device_opts, "id");
if (strcmp(old, new) != 0) {
error_setg(errp, "Cannot attach more than one primary device to "
"'%s': '%s' and '%s'", n->netclient_name, old, new);
return false;
}
} else {
n->primary_opts = qdict_clone_shallow(device_opts);
n->primary_opts_from_json = from_json;
}
/* failover_primary_hidden is set during feature negotiation */
return qatomic_read(&n->failover_primary_hidden);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
static void virtio_net_device_realize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIONet *n = VIRTIO_NET(dev);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
NetClientState *nc;
int i;
if (n->net_conf.mtu) {
n->host_features |= (1ULL << VIRTIO_NET_F_MTU);
}
if (n->net_conf.duplex_str) {
if (strncmp(n->net_conf.duplex_str, "half", 5) == 0) {
n->net_conf.duplex = DUPLEX_HALF;
} else if (strncmp(n->net_conf.duplex_str, "full", 5) == 0) {
n->net_conf.duplex = DUPLEX_FULL;
} else {
error_setg(errp, "'duplex' must be 'half' or 'full'");
virtio-net: Fix duplex=... and speed=... error handling virtio_net_device_realize() rejects invalid duplex and speed values. The error handling is broken: $ ../qemu/bld-sani/x86_64-softmmu/qemu-system-x86_64 -S -display none -monitor stdio QEMU 4.2.93 monitor - type 'help' for more information (qemu) device_add virtio-net,duplex=x Error: 'duplex' must be 'half' or 'full' (qemu) c ================================================================= ==15654==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e000014590 at pc 0x560b75c8dc13 bp 0x7fffdf1a6950 sp 0x7fffdf1a6940 READ of size 8 at 0x62e000014590 thread T0 #0 0x560b75c8dc12 in object_dynamic_cast_assert /work/armbru/qemu/qom/object.c:826 #1 0x560b74c38ac0 in virtio_vmstate_change /work/armbru/qemu/hw/virtio/virtio.c:3210 #2 0x560b74d9765e in vm_state_notify /work/armbru/qemu/softmmu/vl.c:1271 #3 0x560b7494ba72 in vm_prepare_start /work/armbru/qemu/cpus.c:2156 #4 0x560b7494bacd in vm_start /work/armbru/qemu/cpus.c:2162 #5 0x560b75a7d890 in qmp_cont /work/armbru/qemu/monitor/qmp-cmds.c:160 #6 0x560b75a8d70a in hmp_cont /work/armbru/qemu/monitor/hmp-cmds.c:1043 #7 0x560b75a799f2 in handle_hmp_command /work/armbru/qemu/monitor/hmp.c:1082 [...] 0x62e000014590 is located 33168 bytes inside of 42288-byte region [0x62e00000c400,0x62e000016930) freed by thread T1 here: #0 0x7feadd39491f in __interceptor_free (/lib64/libasan.so.5+0x10d91f) #1 0x7feadcebcd7c in g_free (/lib64/libglib-2.0.so.0+0x55d7c) #2 0x560b75c8fd40 in object_unref /work/armbru/qemu/qom/object.c:1128 #3 0x560b7498a625 in memory_region_unref /work/armbru/qemu/memory.c:1762 #4 0x560b74999fa4 in do_address_space_destroy /work/armbru/qemu/memory.c:2788 #5 0x560b762362fc in call_rcu_thread /work/armbru/qemu/util/rcu.c:283 #6 0x560b761c8884 in qemu_thread_start /work/armbru/qemu/util/qemu-thread-posix.c:519 #7 0x7fead9be34bf in start_thread (/lib64/libpthread.so.0+0x84bf) previously allocated by thread T0 here: #0 0x7feadd394d18 in __interceptor_malloc (/lib64/libasan.so.5+0x10dd18) #1 0x7feadcebcc88 in g_malloc (/lib64/libglib-2.0.so.0+0x55c88) #2 0x560b75c8cf8a in object_new /work/armbru/qemu/qom/object.c:699 #3 0x560b75010ad9 in qdev_device_add /work/armbru/qemu/qdev-monitor.c:654 #4 0x560b750120c2 in qmp_device_add /work/armbru/qemu/qdev-monitor.c:805 #5 0x560b75012c1b in hmp_device_add /work/armbru/qemu/qdev-monitor.c:905 [...] ==15654==ABORTING Cause: virtio_net_device_realize() neglects to bail out after setting the error. Fix that. Fixes: 9473939ed7addcaaeb8fde5c093918fb7fa0919c Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200422130719.28225-9-armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-22 16:07:13 +03:00
return;
}
n->host_features |= (1ULL << VIRTIO_NET_F_SPEED_DUPLEX);
} else {
n->net_conf.duplex = DUPLEX_UNKNOWN;
}
if (n->net_conf.speed < SPEED_UNKNOWN) {
error_setg(errp, "'speed' must be between 0 and INT_MAX");
virtio-net: Fix duplex=... and speed=... error handling virtio_net_device_realize() rejects invalid duplex and speed values. The error handling is broken: $ ../qemu/bld-sani/x86_64-softmmu/qemu-system-x86_64 -S -display none -monitor stdio QEMU 4.2.93 monitor - type 'help' for more information (qemu) device_add virtio-net,duplex=x Error: 'duplex' must be 'half' or 'full' (qemu) c ================================================================= ==15654==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e000014590 at pc 0x560b75c8dc13 bp 0x7fffdf1a6950 sp 0x7fffdf1a6940 READ of size 8 at 0x62e000014590 thread T0 #0 0x560b75c8dc12 in object_dynamic_cast_assert /work/armbru/qemu/qom/object.c:826 #1 0x560b74c38ac0 in virtio_vmstate_change /work/armbru/qemu/hw/virtio/virtio.c:3210 #2 0x560b74d9765e in vm_state_notify /work/armbru/qemu/softmmu/vl.c:1271 #3 0x560b7494ba72 in vm_prepare_start /work/armbru/qemu/cpus.c:2156 #4 0x560b7494bacd in vm_start /work/armbru/qemu/cpus.c:2162 #5 0x560b75a7d890 in qmp_cont /work/armbru/qemu/monitor/qmp-cmds.c:160 #6 0x560b75a8d70a in hmp_cont /work/armbru/qemu/monitor/hmp-cmds.c:1043 #7 0x560b75a799f2 in handle_hmp_command /work/armbru/qemu/monitor/hmp.c:1082 [...] 0x62e000014590 is located 33168 bytes inside of 42288-byte region [0x62e00000c400,0x62e000016930) freed by thread T1 here: #0 0x7feadd39491f in __interceptor_free (/lib64/libasan.so.5+0x10d91f) #1 0x7feadcebcd7c in g_free (/lib64/libglib-2.0.so.0+0x55d7c) #2 0x560b75c8fd40 in object_unref /work/armbru/qemu/qom/object.c:1128 #3 0x560b7498a625 in memory_region_unref /work/armbru/qemu/memory.c:1762 #4 0x560b74999fa4 in do_address_space_destroy /work/armbru/qemu/memory.c:2788 #5 0x560b762362fc in call_rcu_thread /work/armbru/qemu/util/rcu.c:283 #6 0x560b761c8884 in qemu_thread_start /work/armbru/qemu/util/qemu-thread-posix.c:519 #7 0x7fead9be34bf in start_thread (/lib64/libpthread.so.0+0x84bf) previously allocated by thread T0 here: #0 0x7feadd394d18 in __interceptor_malloc (/lib64/libasan.so.5+0x10dd18) #1 0x7feadcebcc88 in g_malloc (/lib64/libglib-2.0.so.0+0x55c88) #2 0x560b75c8cf8a in object_new /work/armbru/qemu/qom/object.c:699 #3 0x560b75010ad9 in qdev_device_add /work/armbru/qemu/qdev-monitor.c:654 #4 0x560b750120c2 in qmp_device_add /work/armbru/qemu/qdev-monitor.c:805 #5 0x560b75012c1b in hmp_device_add /work/armbru/qemu/qdev-monitor.c:905 [...] ==15654==ABORTING Cause: virtio_net_device_realize() neglects to bail out after setting the error. Fix that. Fixes: 9473939ed7addcaaeb8fde5c093918fb7fa0919c Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200422130719.28225-9-armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-22 16:07:13 +03:00
return;
}
if (n->net_conf.speed >= 0) {
n->host_features |= (1ULL << VIRTIO_NET_F_SPEED_DUPLEX);
}
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (n->failover) {
n->primary_listener.hide_device = failover_hide_primary_device;
qatomic_set(&n->failover_primary_hidden, true);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
device_listener_register(&n->primary_listener);
n->migration_state.notify = virtio_net_migration_state_notifier;
add_migration_state_change_notifier(&n->migration_state);
n->host_features |= (1ULL << VIRTIO_NET_F_STANDBY);
}
virtio_net_set_config_size(n, n->host_features);
virtio_init(vdev, VIRTIO_ID_NET, n->config_size);
/*
* We set a lower limit on RX queue size to what it always was.
* Guests that want a smaller ring can always resize it without
* help from us (using virtio 1 and up).
*/
if (n->net_conf.rx_queue_size < VIRTIO_NET_RX_QUEUE_MIN_SIZE ||
n->net_conf.rx_queue_size > VIRTQUEUE_MAX_SIZE ||
!is_power_of_2(n->net_conf.rx_queue_size)) {
error_setg(errp, "Invalid rx_queue_size (= %" PRIu16 "), "
"must be a power of 2 between %d and %d.",
n->net_conf.rx_queue_size, VIRTIO_NET_RX_QUEUE_MIN_SIZE,
VIRTQUEUE_MAX_SIZE);
virtio_cleanup(vdev);
return;
}
if (n->net_conf.tx_queue_size < VIRTIO_NET_TX_QUEUE_MIN_SIZE ||
n->net_conf.tx_queue_size > VIRTQUEUE_MAX_SIZE ||
!is_power_of_2(n->net_conf.tx_queue_size)) {
error_setg(errp, "Invalid tx_queue_size (= %" PRIu16 "), "
"must be a power of 2 between %d and %d",
n->net_conf.tx_queue_size, VIRTIO_NET_TX_QUEUE_MIN_SIZE,
VIRTQUEUE_MAX_SIZE);
virtio_cleanup(vdev);
return;
}
n->max_ncs = MAX(n->nic_conf.peers.queues, 1);
/*
* Figure out the datapath queue pairs since the backend could
* provide control queue via peers as well.
*/
if (n->nic_conf.peers.queues) {
for (i = 0; i < n->max_ncs; i++) {
if (n->nic_conf.peers.ncs[i]->is_datapath) {
++n->max_queue_pairs;
}
}
}
n->max_queue_pairs = MAX(n->max_queue_pairs, 1);
if (n->max_queue_pairs * 2 + 1 > VIRTIO_QUEUE_MAX) {
error_setg(errp, "Invalid number of queue pairs (= %" PRIu32 "), "
"must be a positive integer less than %d.",
n->max_queue_pairs, (VIRTIO_QUEUE_MAX - 1) / 2);
virtio_cleanup(vdev);
return;
}
n->vqs = g_new0(VirtIONetQueue, n->max_queue_pairs);
n->curr_queue_pairs = 1;
n->tx_timeout = n->net_conf.txtimer;
if (n->net_conf.tx && strcmp(n->net_conf.tx, "timer")
&& strcmp(n->net_conf.tx, "bh")) {
warn_report("virtio-net: "
"Unknown option tx=%s, valid options: \"timer\" \"bh\"",
n->net_conf.tx);
error_printf("Defaulting to \"bh\"");
}
n->net_conf.tx_queue_size = MIN(virtio_net_max_tx_queue_size(n),
n->net_conf.tx_queue_size);
for (i = 0; i < n->max_queue_pairs; i++) {
virtio_net_add_queue(n, i);
}
n->ctrl_vq = virtio_add_queue(vdev, 64, virtio_net_handle_ctrl);
qemu_macaddr_default_if_unset(&n->nic_conf.macaddr);
memcpy(&n->mac[0], &n->nic_conf.macaddr, sizeof(n->mac));
n->status = VIRTIO_NET_S_LINK_UP;
qemu_announce_timer_reset(&n->announce_timer, migrate_announce_params(),
QEMU_CLOCK_VIRTUAL,
virtio_net_announce_timer, n);
n->announce_timer.round = 0;
if (n->netclient_type) {
/*
* Happen when virtio_net_set_netclient_name has been called.
*/
n->nic = qemu_new_nic(&net_virtio_info, &n->nic_conf,
n->netclient_type, n->netclient_name, n);
} else {
n->nic = qemu_new_nic(&net_virtio_info, &n->nic_conf,
object_get_typename(OBJECT(dev)), dev->id, n);
}
for (i = 0; i < n->max_queue_pairs; i++) {
n->nic->ncs[i].do_not_pad = true;
}
peer_test_vnet_hdr(n);
if (peer_has_vnet_hdr(n)) {
for (i = 0; i < n->max_queue_pairs; i++) {
qemu_using_vnet_hdr(qemu_get_subqueue(n->nic, i)->peer, true);
}
n->host_hdr_len = sizeof(struct virtio_net_hdr);
} else {
n->host_hdr_len = 0;
}
qemu_format_nic_info_str(qemu_get_queue(n->nic), n->nic_conf.macaddr.a);
n->vqs[0].tx_waiting = 0;
n->tx_burst = n->net_conf.txburst;
virtio_net_set_mrg_rx_bufs(n, 0, 0, 0);
n->promisc = 1; /* for compatibility */
n->mac_table.macs = g_malloc0(MAC_TABLE_ENTRIES * ETH_ALEN);
n->vlans = g_malloc0(MAX_VLAN >> 3);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
nc = qemu_get_queue(n->nic);
nc->rxfilter_notify_enabled = 1;
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
struct virtio_net_config netcfg = {};
memcpy(&netcfg.mac, &n->nic_conf.macaddr, ETH_ALEN);
vhost_net_set_config(get_vhost_net(nc->peer),
(uint8_t *)&netcfg, 0, ETH_ALEN, VHOST_SET_CONFIG_TYPE_MASTER);
}
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
QTAILQ_INIT(&n->rsc_chains);
n->qdev = dev;
net_rx_pkt_init(&n->rx_pkt);
if (virtio_has_feature(n->host_features, VIRTIO_NET_F_RSS)) {
virtio_net_load_ebpf(n);
}
}
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 18:29:24 +03:00
static void virtio_net_device_unrealize(DeviceState *dev)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIONet *n = VIRTIO_NET(dev);
int i, max_queue_pairs;
if (virtio_has_feature(n->host_features, VIRTIO_NET_F_RSS)) {
virtio_net_unload_ebpf(n);
}
/* This will stop vhost backend if appropriate. */
virtio_net_set_status(vdev, 0);
g_free(n->netclient_name);
n->netclient_name = NULL;
g_free(n->netclient_type);
n->netclient_type = NULL;
g_free(n->mac_table.macs);
g_free(n->vlans);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
if (n->failover) {
qobject_unref(n->primary_opts);
device_listener_unregister(&n->primary_listener);
virtio-net: failover: add missing remove_migration_state_change_notifier() In the failover case configuration, virtio_net_device_realize() uses an add_migration_state_change_notifier() to add a state notifier, but this notifier is not removed by the unrealize function when the virtio-net card is unplugged. If the card is unplugged and a migration is started, the notifier is called and as it is not valid anymore QEMU crashes. This patch fixes the problem by adding the remove_migration_state_change_notifier() in virtio_net_device_unrealize(). The problem can be reproduced with: $ qemu-system-x86_64 -enable-kvm -m 1g -M q35 \ -device pcie-root-port,slot=4,id=root1 \ -device pcie-root-port,slot=5,id=root2 \ -device virtio-net-pci,id=net1,mac=52:54:00:6f:55:cc,failover=on,bus=root1 \ -monitor stdio disk.qcow2 (qemu) device_del net1 (qemu) migrate "exec:gzip -c > STATEFILE.gz" Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault. 0x0000000000000000 in ?? () (gdb) bt #0 0x0000000000000000 in () #1 0x0000555555d726d7 in notifier_list_notify (...) at .../util/notify.c:39 #2 0x0000555555842c1a in migrate_fd_connect (...) at .../migration/migration.c:3975 #3 0x0000555555950f7d in migration_channel_connect (...) error@entry=0x0) at .../migration/channel.c:107 #4 0x0000555555910922 in exec_start_outgoing_migration (...) at .../migration/exec.c:42 Reported-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-27 16:51:47 +03:00
remove_migration_state_change_notifier(&n->migration_state);
} else {
assert(n->primary_opts == NULL);
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
max_queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
for (i = 0; i < max_queue_pairs; i++) {
virtio_net_del_queue(n, i);
}
/* delete also control vq */
virtio_del_queue(vdev, max_queue_pairs * 2);
qemu_announce_timer_del(&n->announce_timer, false);
g_free(n->vqs);
qemu_del_nic(n->nic);
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
virtio_net_rsc_cleanup(n);
g_free(n->rss_data.indirections_table);
net_rx_pkt_uninit(n->rx_pkt);
virtio_cleanup(vdev);
}
static void virtio_net_instance_init(Object *obj)
{
VirtIONet *n = VIRTIO_NET(obj);
/*
* The default config_size is sizeof(struct virtio_net_config).
* Can be overriden with virtio_net_set_config_size.
*/
n->config_size = sizeof(struct virtio_net_config);
device_add_bootindex_property(obj, &n->nic_conf.bootindex,
"bootindex", "/ethernet-phy@0",
DEVICE(n));
ebpf_rss_init(&n->ebpf_rss);
}
static int virtio_net_pre_save(void *opaque)
{
VirtIONet *n = opaque;
/* At this point, backend must be stopped, otherwise
* it might keep writing to memory. */
assert(!n->vhost_started);
return 0;
}
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
static bool primary_unplug_pending(void *opaque)
{
DeviceState *dev = opaque;
DeviceState *primary;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIONet *n = VIRTIO_NET(vdev);
if (!virtio_vdev_has_feature(vdev, VIRTIO_NET_F_STANDBY)) {
return false;
}
primary = failover_find_primary_device(n);
return primary ? primary->pending_deleted_event : false;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
}
static bool dev_unplug_pending(void *opaque)
{
DeviceState *dev = opaque;
VirtioDeviceClass *vdc = VIRTIO_DEVICE_GET_CLASS(dev);
return vdc->primary_unplug_pending(dev);
}
static struct vhost_dev *virtio_net_get_vhost(VirtIODevice *vdev)
{
VirtIONet *n = VIRTIO_NET(vdev);
NetClientState *nc = qemu_get_queue(n->nic);
struct vhost_net *net = get_vhost_net(nc->peer);
return &net->dev;
}
static const VMStateDescription vmstate_virtio_net = {
.name = "virtio-net",
.minimum_version_id = VIRTIO_NET_VM_VERSION,
.version_id = VIRTIO_NET_VM_VERSION,
.fields = (VMStateField[]) {
VMSTATE_VIRTIO_DEVICE,
VMSTATE_END_OF_LIST()
},
.pre_save = virtio_net_pre_save,
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
.dev_unplug_pending = dev_unplug_pending,
};
static Property virtio_net_properties[] = {
DEFINE_PROP_BIT64("csum", VirtIONet, host_features,
VIRTIO_NET_F_CSUM, true),
DEFINE_PROP_BIT64("guest_csum", VirtIONet, host_features,
VIRTIO_NET_F_GUEST_CSUM, true),
DEFINE_PROP_BIT64("gso", VirtIONet, host_features, VIRTIO_NET_F_GSO, true),
DEFINE_PROP_BIT64("guest_tso4", VirtIONet, host_features,
VIRTIO_NET_F_GUEST_TSO4, true),
DEFINE_PROP_BIT64("guest_tso6", VirtIONet, host_features,
VIRTIO_NET_F_GUEST_TSO6, true),
DEFINE_PROP_BIT64("guest_ecn", VirtIONet, host_features,
VIRTIO_NET_F_GUEST_ECN, true),
DEFINE_PROP_BIT64("guest_ufo", VirtIONet, host_features,
VIRTIO_NET_F_GUEST_UFO, true),
DEFINE_PROP_BIT64("guest_announce", VirtIONet, host_features,
VIRTIO_NET_F_GUEST_ANNOUNCE, true),
DEFINE_PROP_BIT64("host_tso4", VirtIONet, host_features,
VIRTIO_NET_F_HOST_TSO4, true),
DEFINE_PROP_BIT64("host_tso6", VirtIONet, host_features,
VIRTIO_NET_F_HOST_TSO6, true),
DEFINE_PROP_BIT64("host_ecn", VirtIONet, host_features,
VIRTIO_NET_F_HOST_ECN, true),
DEFINE_PROP_BIT64("host_ufo", VirtIONet, host_features,
VIRTIO_NET_F_HOST_UFO, true),
DEFINE_PROP_BIT64("mrg_rxbuf", VirtIONet, host_features,
VIRTIO_NET_F_MRG_RXBUF, true),
DEFINE_PROP_BIT64("status", VirtIONet, host_features,
VIRTIO_NET_F_STATUS, true),
DEFINE_PROP_BIT64("ctrl_vq", VirtIONet, host_features,
VIRTIO_NET_F_CTRL_VQ, true),
DEFINE_PROP_BIT64("ctrl_rx", VirtIONet, host_features,
VIRTIO_NET_F_CTRL_RX, true),
DEFINE_PROP_BIT64("ctrl_vlan", VirtIONet, host_features,
VIRTIO_NET_F_CTRL_VLAN, true),
DEFINE_PROP_BIT64("ctrl_rx_extra", VirtIONet, host_features,
VIRTIO_NET_F_CTRL_RX_EXTRA, true),
DEFINE_PROP_BIT64("ctrl_mac_addr", VirtIONet, host_features,
VIRTIO_NET_F_CTRL_MAC_ADDR, true),
DEFINE_PROP_BIT64("ctrl_guest_offloads", VirtIONet, host_features,
VIRTIO_NET_F_CTRL_GUEST_OFFLOADS, true),
DEFINE_PROP_BIT64("mq", VirtIONet, host_features, VIRTIO_NET_F_MQ, false),
DEFINE_PROP_BIT64("rss", VirtIONet, host_features,
VIRTIO_NET_F_RSS, false),
DEFINE_PROP_BIT64("hash", VirtIONet, host_features,
VIRTIO_NET_F_HASH_REPORT, false),
virtio-net: support RSC v4/v6 tcp traffic for Windows HCK This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-03 16:12:29 +03:00
DEFINE_PROP_BIT64("guest_rsc_ext", VirtIONet, host_features,
VIRTIO_NET_F_RSC_EXT, false),
DEFINE_PROP_UINT32("rsc_interval", VirtIONet, rsc_timeout,
VIRTIO_NET_RSC_DEFAULT_INTERVAL),
DEFINE_NIC_PROPERTIES(VirtIONet, nic_conf),
DEFINE_PROP_UINT32("x-txtimer", VirtIONet, net_conf.txtimer,
TX_TIMER_INTERVAL),
DEFINE_PROP_INT32("x-txburst", VirtIONet, net_conf.txburst, TX_BURST),
DEFINE_PROP_STRING("tx", VirtIONet, net_conf.tx),
DEFINE_PROP_UINT16("rx_queue_size", VirtIONet, net_conf.rx_queue_size,
VIRTIO_NET_RX_QUEUE_DEFAULT_SIZE),
DEFINE_PROP_UINT16("tx_queue_size", VirtIONet, net_conf.tx_queue_size,
VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE),
DEFINE_PROP_UINT16("host_mtu", VirtIONet, net_conf.mtu, 0),
DEFINE_PROP_BOOL("x-mtu-bypass-backend", VirtIONet, mtu_bypass_backend,
true),
DEFINE_PROP_INT32("speed", VirtIONet, net_conf.speed, SPEED_UNKNOWN),
DEFINE_PROP_STRING("duplex", VirtIONet, net_conf.duplex_str),
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
DEFINE_PROP_BOOL("failover", VirtIONet, failover, false),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_net_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
device_class_set_props(dc, virtio_net_properties);
dc->vmsd = &vmstate_virtio_net;
set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
vdc->realize = virtio_net_device_realize;
vdc->unrealize = virtio_net_device_unrealize;
vdc->get_config = virtio_net_get_config;
vdc->set_config = virtio_net_set_config;
vdc->get_features = virtio_net_get_features;
vdc->set_features = virtio_net_set_features;
vdc->bad_features = virtio_net_bad_features;
vdc->reset = virtio_net_reset;
vdc->queue_reset = virtio_net_queue_reset;
vdc->queue_enable = virtio_net_queue_enable;
vdc->set_status = virtio_net_set_status;
vdc->guest_notifier_mask = virtio_net_guest_notifier_mask;
vdc->guest_notifier_pending = virtio_net_guest_notifier_pending;
vdc->legacy_features |= (0x1 << VIRTIO_NET_F_GSO);
virtio-net: prevent offloads reset on migration Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command are not preserved on VM migration. Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES) get enabled. What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads are getting set correctly: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334 #3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:168 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 However later on the features are getting restored, and offloads get reset to everything supported by features: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773 #3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 Fix this by preserving the state in saved_guest_offloads field and pushing out offload initialization to the new post load hook. Cc: qemu-stable@nongnu.org Signed-off-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-11 16:58:04 +03:00
vdc->post_load = virtio_net_post_load_virtio;
vdc->vmsd = &vmstate_virtio_net_device;
net/virtio: add failover support This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 14:49:04 +03:00
vdc->primary_unplug_pending = primary_unplug_pending;
vdc->get_vhost = virtio_net_get_vhost;
}
static const TypeInfo virtio_net_info = {
.name = TYPE_VIRTIO_NET,
.parent = TYPE_VIRTIO_DEVICE,
.instance_size = sizeof(VirtIONet),
.instance_init = virtio_net_instance_init,
.class_init = virtio_net_class_init,
};
static void virtio_register_types(void)
{
type_register_static(&virtio_net_info);
}
type_init(virtio_register_types)