qemu/include/sysemu/dma.h

221 lines
7.4 KiB
C
Raw Normal View History

/*
* DMA helper functions
*
* Copyright (c) 2009 Red Hat
*
* This work is licensed under the terms of the GNU General Public License
* (GNU GPL), version 2 or later.
*/
#ifndef DMA_H
#define DMA_H
#include "exec/memory.h"
#include "exec/address-spaces.h"
#include "hw/hw.h"
#include "block/block.h"
#include "block/accounting.h"
#include "sysemu/kvm.h"
typedef struct ScatterGatherEntry ScatterGatherEntry;
typedef enum {
DMA_DIRECTION_TO_DEVICE = 0,
DMA_DIRECTION_FROM_DEVICE = 1,
} DMADirection;
struct QEMUSGList {
ScatterGatherEntry *sg;
int nsg;
int nalloc;
size_t size;
DeviceState *dev;
AddressSpace *as;
};
#ifndef CONFIG_USER_ONLY
/*
* When an IOMMU is present, bus addresses become distinct from
* CPU/memory physical addresses and may be a different size. Because
* the IOVA size depends more on the bus than on the platform, we more
* or less have to treat these as 64-bit always to cover all (or at
* least most) cases.
*/
typedef uint64_t dma_addr_t;
#define DMA_ADDR_BITS 64
#define DMA_ADDR_FMT "%" PRIx64
static inline void dma_barrier(AddressSpace *as, DMADirection dir)
{
/*
* This is called before DMA read and write operations
* unless the _relaxed form is used and is responsible
* for providing some sane ordering of accesses vs
* concurrently running VCPUs.
*
* Users of map(), unmap() or lower level st/ld_*
* operations are responsible for providing their own
* ordering via barriers.
*
* This primitive implementation does a simple smp_mb()
* before each operation which provides pretty much full
* ordering.
*
* A smarter implementation can be devised if needed to
* use lighter barriers based on the direction of the
* transfer, the DMA context, etc...
*/
if (kvm_enabled()) {
smp_mb();
}
}
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
/* Checks that the given range of addresses is valid for DMA. This is
* useful for certain cases, but usually you should just use
* dma_memory_{read,write}() and check for errors */
static inline bool dma_memory_valid(AddressSpace *as,
dma_addr_t addr, dma_addr_t len,
DMADirection dir)
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
{
return address_space_access_valid(as, addr, len,
dir == DMA_DIRECTION_FROM_DEVICE);
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
}
static inline int dma_memory_rw_relaxed(AddressSpace *as, dma_addr_t addr,
void *buf, dma_addr_t len,
DMADirection dir)
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
{
return (bool)address_space_rw(as, addr, MEMTXATTRS_UNSPECIFIED,
buf, len, dir == DMA_DIRECTION_FROM_DEVICE);
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
}
static inline int dma_memory_read_relaxed(AddressSpace *as, dma_addr_t addr,
void *buf, dma_addr_t len)
{
return dma_memory_rw_relaxed(as, addr, buf, len, DMA_DIRECTION_TO_DEVICE);
}
static inline int dma_memory_write_relaxed(AddressSpace *as, dma_addr_t addr,
const void *buf, dma_addr_t len)
{
return dma_memory_rw_relaxed(as, addr, (void *)buf, len,
DMA_DIRECTION_FROM_DEVICE);
}
static inline int dma_memory_rw(AddressSpace *as, dma_addr_t addr,
void *buf, dma_addr_t len,
DMADirection dir)
{
dma_barrier(as, dir);
return dma_memory_rw_relaxed(as, addr, buf, len, dir);
}
static inline int dma_memory_read(AddressSpace *as, dma_addr_t addr,
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
void *buf, dma_addr_t len)
{
return dma_memory_rw(as, addr, buf, len, DMA_DIRECTION_TO_DEVICE);
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
}
static inline int dma_memory_write(AddressSpace *as, dma_addr_t addr,
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
const void *buf, dma_addr_t len)
{
return dma_memory_rw(as, addr, (void *)buf, len,
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
DMA_DIRECTION_FROM_DEVICE);
}
int dma_memory_set(AddressSpace *as, dma_addr_t addr, uint8_t c, dma_addr_t len);
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
static inline void *dma_memory_map(AddressSpace *as,
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
dma_addr_t addr, dma_addr_t *len,
DMADirection dir)
{
hwaddr xlen = *len;
void *p;
p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE);
*len = xlen;
return p;
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
}
static inline void dma_memory_unmap(AddressSpace *as,
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
void *buffer, dma_addr_t len,
DMADirection dir, dma_addr_t access_len)
{
address_space_unmap(as, buffer, (hwaddr)len,
dir == DMA_DIRECTION_FROM_DEVICE, access_len);
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
}
#define DEFINE_LDST_DMA(_lname, _sname, _bits, _end) \
static inline uint##_bits##_t ld##_lname##_##_end##_dma(AddressSpace *as, \
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
dma_addr_t addr) \
{ \
uint##_bits##_t val; \
dma_memory_read(as, addr, &val, (_bits) / 8); \
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
return _end##_bits##_to_cpu(val); \
} \
static inline void st##_sname##_##_end##_dma(AddressSpace *as, \
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
dma_addr_t addr, \
uint##_bits##_t val) \
{ \
val = cpu_to_##_end##_bits(val); \
dma_memory_write(as, addr, &val, (_bits) / 8); \
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
}
static inline uint8_t ldub_dma(AddressSpace *as, dma_addr_t addr)
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
{
uint8_t val;
dma_memory_read(as, addr, &val, 1);
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
return val;
}
static inline void stb_dma(AddressSpace *as, dma_addr_t addr, uint8_t val)
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
{
dma_memory_write(as, addr, &val, 1);
iommu: Add universal DMA helper functions Not that long ago, every device implementation using DMA directly accessed guest memory using cpu_physical_memory_*(). This meant that adding support for a guest visible IOMMU would require changing every one of these devices to go through IOMMU translation. Shortly before qemu 1.0, I made a start on fixing this by providing helper functions for PCI DMA. These are currently just stubs which call the direct access functions, but mean that an IOMMU can be implemented in one place, rather than for every PCI device. Clearly, this doesn't help for non PCI devices, which could also be IOMMU translated on some platforms. It is also problematic for the devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we cannot use the the pci_dma_*() functions, because they assume the presence of a PCIDevice, but we don't want to have to check between pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the device code. This patch makes the first step on addressing both these problems, by introducing new (stub) dma helper functions which can be used for any DMA capable device. These dma functions take a DMAContext *, a new (currently empty) variable describing the DMA address space in which the operation is to take place. NULL indicates untranslated DMA directly into guest physical address space. The intention is that in future non-NULL values will given information about any necessary IOMMU translation. DMA using devices must obtain a DMAContext (or, potentially, contexts) from their bus or platform. For now this patch just converts the PCI wrappers to be implemented in terms of the universal wrappers, converting other drivers can take place over time. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 08:50:38 +04:00
}
DEFINE_LDST_DMA(uw, w, 16, le);
DEFINE_LDST_DMA(l, l, 32, le);
DEFINE_LDST_DMA(q, q, 64, le);
DEFINE_LDST_DMA(uw, w, 16, be);
DEFINE_LDST_DMA(l, l, 32, be);
DEFINE_LDST_DMA(q, q, 64, be);
#undef DEFINE_LDST_DMA
struct ScatterGatherEntry {
dma_addr_t base;
dma_addr_t len;
};
void qemu_sglist_init(QEMUSGList *qsg, DeviceState *dev, int alloc_hint,
AddressSpace *as);
void qemu_sglist_add(QEMUSGList *qsg, dma_addr_t base, dma_addr_t len);
void qemu_sglist_destroy(QEMUSGList *qsg);
#endif
typedef BlockAIOCB *DMAIOFunc(BlockBackend *blk, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque);
BlockAIOCB *dma_blk_io(BlockBackend *blk,
QEMUSGList *sg, uint64_t sector_num,
DMAIOFunc *io_func, BlockCompletionFunc *cb,
void *opaque, DMADirection dir);
BlockAIOCB *dma_blk_read(BlockBackend *blk,
QEMUSGList *sg, uint64_t sector,
BlockCompletionFunc *cb, void *opaque);
BlockAIOCB *dma_blk_write(BlockBackend *blk,
QEMUSGList *sg, uint64_t sector,
BlockCompletionFunc *cb, void *opaque);
uint64_t dma_buf_read(uint8_t *ptr, int32_t len, QEMUSGList *sg);
uint64_t dma_buf_write(uint8_t *ptr, int32_t len, QEMUSGList *sg);
void dma_acct_start(BlockBackend *blk, BlockAcctCookie *cookie,
QEMUSGList *sg, enum BlockAcctType type);
#endif