qemu/hw/arm/aspeed_ast2600.c

549 lines
20 KiB
C
Raw Normal View History

/*
* ASPEED SoC 2600 family
*
* Copyright (c) 2016-2019, IBM Corporation.
*
* This code is licensed under the GPL version 2 or later. See
* the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "cpu.h"
#include "exec/address-spaces.h"
#include "hw/misc/unimp.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/char/serial.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qemu/error-report.h"
#include "hw/i2c/aspeed_i2c.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
#define ASPEED_SOC_IOMEM_SIZE 0x00200000
static const hwaddr aspeed_soc_ast2600_memmap[] = {
[ASPEED_DEV_SRAM] = 0x10000000,
/* 0x16000000 0x17FFFFFF : AHB BUS do LPC Bus bridge */
[ASPEED_DEV_IOMEM] = 0x1E600000,
[ASPEED_DEV_PWM] = 0x1E610000,
[ASPEED_DEV_FMC] = 0x1E620000,
[ASPEED_DEV_SPI1] = 0x1E630000,
[ASPEED_DEV_SPI2] = 0x1E641000,
[ASPEED_DEV_EHCI1] = 0x1E6A1000,
[ASPEED_DEV_EHCI2] = 0x1E6A3000,
[ASPEED_DEV_MII1] = 0x1E650000,
[ASPEED_DEV_MII2] = 0x1E650008,
[ASPEED_DEV_MII3] = 0x1E650010,
[ASPEED_DEV_MII4] = 0x1E650018,
[ASPEED_DEV_ETH1] = 0x1E660000,
[ASPEED_DEV_ETH3] = 0x1E670000,
[ASPEED_DEV_ETH2] = 0x1E680000,
[ASPEED_DEV_ETH4] = 0x1E690000,
[ASPEED_DEV_VIC] = 0x1E6C0000,
[ASPEED_DEV_HACE] = 0x1E6D0000,
[ASPEED_DEV_SDMC] = 0x1E6E0000,
[ASPEED_DEV_SCU] = 0x1E6E2000,
[ASPEED_DEV_XDMA] = 0x1E6E7000,
[ASPEED_DEV_ADC] = 0x1E6E9000,
[ASPEED_DEV_VIDEO] = 0x1E700000,
[ASPEED_DEV_SDHCI] = 0x1E740000,
[ASPEED_DEV_EMMC] = 0x1E750000,
[ASPEED_DEV_GPIO] = 0x1E780000,
[ASPEED_DEV_GPIO_1_8V] = 0x1E780800,
[ASPEED_DEV_RTC] = 0x1E781000,
[ASPEED_DEV_TIMER1] = 0x1E782000,
[ASPEED_DEV_WDT] = 0x1E785000,
[ASPEED_DEV_LPC] = 0x1E789000,
[ASPEED_DEV_IBT] = 0x1E789140,
[ASPEED_DEV_I2C] = 0x1E78A000,
[ASPEED_DEV_UART1] = 0x1E783000,
[ASPEED_DEV_UART5] = 0x1E784000,
[ASPEED_DEV_VUART] = 0x1E787000,
[ASPEED_DEV_SDRAM] = 0x80000000,
};
#define ASPEED_A7MPCORE_ADDR 0x40460000
#define AST2600_MAX_IRQ 197
/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */
static const int aspeed_soc_ast2600_irqmap[] = {
[ASPEED_DEV_UART1] = 47,
[ASPEED_DEV_UART2] = 48,
[ASPEED_DEV_UART3] = 49,
[ASPEED_DEV_UART4] = 50,
[ASPEED_DEV_UART5] = 8,
[ASPEED_DEV_VUART] = 8,
[ASPEED_DEV_FMC] = 39,
[ASPEED_DEV_SDMC] = 0,
[ASPEED_DEV_SCU] = 12,
[ASPEED_DEV_ADC] = 78,
[ASPEED_DEV_XDMA] = 6,
[ASPEED_DEV_SDHCI] = 43,
[ASPEED_DEV_EHCI1] = 5,
[ASPEED_DEV_EHCI2] = 9,
[ASPEED_DEV_EMMC] = 15,
[ASPEED_DEV_GPIO] = 40,
[ASPEED_DEV_GPIO_1_8V] = 11,
[ASPEED_DEV_RTC] = 13,
[ASPEED_DEV_TIMER1] = 16,
[ASPEED_DEV_TIMER2] = 17,
[ASPEED_DEV_TIMER3] = 18,
[ASPEED_DEV_TIMER4] = 19,
[ASPEED_DEV_TIMER5] = 20,
[ASPEED_DEV_TIMER6] = 21,
[ASPEED_DEV_TIMER7] = 22,
[ASPEED_DEV_TIMER8] = 23,
[ASPEED_DEV_WDT] = 24,
[ASPEED_DEV_PWM] = 44,
[ASPEED_DEV_LPC] = 35,
[ASPEED_DEV_IBT] = 143,
[ASPEED_DEV_I2C] = 110, /* 110 -> 125 */
[ASPEED_DEV_ETH1] = 2,
[ASPEED_DEV_ETH2] = 3,
[ASPEED_DEV_HACE] = 4,
[ASPEED_DEV_ETH3] = 32,
[ASPEED_DEV_ETH4] = 33,
[ASPEED_DEV_KCS] = 138, /* 138 -> 142 */
};
static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl)
{
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
return qdev_get_gpio_in(DEVICE(&s->a7mpcore), sc->irqmap[ctrl]);
}
static void aspeed_soc_ast2600_init(Object *obj)
{
AspeedSoCState *s = ASPEED_SOC(obj);
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
int i;
char socname[8];
char typename[64];
if (sscanf(sc->name, "%7s", socname) != 1) {
g_assert_not_reached();
}
for (i = 0; i < sc->num_cpus; i++) {
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 08:32:25 +03:00
object_initialize_child(obj, "cpu[*]", &s->cpu[i], sc->cpu_type);
}
snprintf(typename, sizeof(typename), "aspeed.scu-%s", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "scu", &s->scu, typename);
qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev",
sc->silicon_rev);
object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu),
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
"hw-strap1");
object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu),
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
"hw-strap2");
object_property_add_alias(obj, "hw-prot-key", OBJECT(&s->scu),
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
"hw-prot-key");
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "a7mpcore", &s->a7mpcore,
TYPE_A15MPCORE_PRIV);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "rtc", &s->rtc, TYPE_ASPEED_RTC);
snprintf(typename, sizeof(typename), "aspeed.timer-%s", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "timerctrl", &s->timerctrl, typename);
snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "i2c", &s->i2c, typename);
snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "fmc", &s->fmc, typename);
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs");
for (i = 0; i < sc->spis_num; i++) {
snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "spi[*]", &s->spi[i], typename);
}
for (i = 0; i < sc->ehcis_num; i++) {
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "ehci[*]", &s->ehci[i],
TYPE_PLATFORM_EHCI);
}
snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "sdmc", &s->sdmc, typename);
object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc),
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
"ram-size");
object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc),
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
"max-ram-size");
for (i = 0; i < sc->wdts_num; i++) {
snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "wdt[*]", &s->wdt[i], typename);
}
for (i = 0; i < sc->macs_num; i++) {
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "ftgmac100[*]", &s->ftgmac100[i],
TYPE_FTGMAC100);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "mii[*]", &s->mii[i], TYPE_ASPEED_MII);
}
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "xdma", &s->xdma, TYPE_ASPEED_XDMA);
snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "gpio", &s->gpio, typename);
snprintf(typename, sizeof(typename), "aspeed.gpio-%s-1_8v", socname);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "gpio_1_8v", &s->gpio_1_8v, typename);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "sd-controller", &s->sdhci,
TYPE_ASPEED_SDHCI);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
/* Init sd card slot class here so that they're under the correct parent */
for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
object_initialize_child(obj, "sd-controller.sdhci[*]",
&s->sdhci.slots[i], TYPE_SYSBUS_SDHCI);
}
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
object_initialize_child(obj, "emmc-controller", &s->emmc,
TYPE_ASPEED_SDHCI);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
object_initialize_child(obj, "emmc-controller.sdhci", &s->emmc.slots[0],
TYPE_SYSBUS_SDHCI);
object_initialize_child(obj, "lpc", &s->lpc, TYPE_ASPEED_LPC);
snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname);
object_initialize_child(obj, "hace", &s->hace, typename);
}
/*
* ASPEED ast2600 has 0xf as cluster ID
*
* https://developer.arm.com/documentation/ddi0388/e/the-system-control-coprocessors/summary-of-system-control-coprocessor-registers/multiprocessor-affinity-register
*/
static uint64_t aspeed_calc_affinity(int cpu)
{
return (0xf << ARM_AFF1_SHIFT) | cpu;
}
static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
{
int i;
AspeedSoCState *s = ASPEED_SOC(dev);
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
Error *err = NULL;
qemu_irq irq;
/* IO space */
create_unimplemented_device("aspeed_soc.io", sc->memmap[ASPEED_DEV_IOMEM],
ASPEED_SOC_IOMEM_SIZE);
/* Video engine stub */
create_unimplemented_device("aspeed.video", sc->memmap[ASPEED_DEV_VIDEO],
0x1000);
/* CPU */
arm/aspeed: Compute the number of CPUs from the SoC definition Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-06-09 15:23:19 +03:00
for (i = 0; i < sc->num_cpus; i++) {
if (sc->num_cpus > 1) {
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
ASPEED_A7MPCORE_ADDR, &error_abort);
}
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->cpu[i]), "mp-affinity",
aspeed_calc_affinity(i), &error_abort);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 1125000000,
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
return;
}
}
/* A7MPCORE */
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->a7mpcore), "num-cpu", sc->num_cpus,
&error_abort);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_int(OBJECT(&s->a7mpcore), "num-irq",
ROUND_UP(AST2600_MAX_IRQ + GIC_INTERNAL, 32),
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
&error_abort);
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2 This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-10 08:32:37 +03:00
sysbus_realize(SYS_BUS_DEVICE(&s->a7mpcore), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, ASPEED_A7MPCORE_ADDR);
arm/aspeed: Compute the number of CPUs from the SoC definition Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-06-09 15:23:19 +03:00
for (i = 0; i < sc->num_cpus; i++) {
SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore);
DeviceState *d = DEVICE(qemu_get_cpu(i));
irq = qdev_get_gpio_in(d, ARM_CPU_IRQ);
sysbus_connect_irq(sbd, i, irq);
irq = qdev_get_gpio_in(d, ARM_CPU_FIQ);
arm/aspeed: Compute the number of CPUs from the SoC definition Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-06-09 15:23:19 +03:00
sysbus_connect_irq(sbd, i + sc->num_cpus, irq);
irq = qdev_get_gpio_in(d, ARM_CPU_VIRQ);
arm/aspeed: Compute the number of CPUs from the SoC definition Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-06-09 15:23:19 +03:00
sysbus_connect_irq(sbd, i + 2 * sc->num_cpus, irq);
irq = qdev_get_gpio_in(d, ARM_CPU_VFIQ);
arm/aspeed: Compute the number of CPUs from the SoC definition Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-06-09 15:23:19 +03:00
sysbus_connect_irq(sbd, i + 3 * sc->num_cpus, irq);
}
/* SRAM */
memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram",
sc->sram_size, &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(),
sc->memmap[ASPEED_DEV_SRAM], &s->sram);
/* SCU */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_DEV_SCU]);
/* RTC */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->rtc), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->memmap[ASPEED_DEV_RTC]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_RTC));
/* Timer */
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_link(OBJECT(&s->timerctrl), "scu", OBJECT(&s->scu),
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->timerctrl), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0,
sc->memmap[ASPEED_DEV_TIMER1]);
for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_DEV_TIMER1 + i);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
}
/* UART - attach an 8250 to the IO space as our UART5 */
serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
aspeed_soc_get_irq(s, ASPEED_DEV_UART5),
38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
/* I2C */
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->memmap[ASPEED_DEV_I2C]);
for (i = 0; i < ASPEED_I2C_GET_CLASS(&s->i2c)->num_busses; i++) {
qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore),
sc->irqmap[ASPEED_DEV_I2C] + i);
/*
* The AST2600 SoC has one IRQ per I2C bus. Skip the common
* IRQ (AST2400 and AST2500) and connect all bussses.
*/
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), i + 1, irq);
}
/* FMC, The number of CS is set at the board level */
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_link(OBJECT(&s->fmc), "dram", OBJECT(s->dram_mr),
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->fmc), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->memmap[ASPEED_DEV_FMC]);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1,
s->fmc.ctrl->flash_window_base);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_FMC));
/* SPI */
for (i = 0; i < sc->spis_num; i++) {
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_link(OBJECT(&s->spi[i]), "dram",
OBJECT(s->dram_mr), &error_abort);
object_property_set_int(OBJECT(&s->spi[i]), "num-cs", 1, &error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0,
sc->memmap[ASPEED_DEV_SPI1 + i]);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1,
s->spi[i].ctrl->flash_window_base);
}
/* EHCI */
for (i = 0; i < sc->ehcis_num; i++) {
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->ehci[i]), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0,
sc->memmap[ASPEED_DEV_EHCI1 + i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_EHCI1 + i));
}
/* SDMC - SDRAM Memory Controller */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdmc), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->memmap[ASPEED_DEV_SDMC]);
/* Watch dog */
for (i = 0; i < sc->wdts_num; i++) {
AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_link(OBJECT(&s->wdt[i]), "scu", OBJECT(&s->scu),
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
sc->memmap[ASPEED_DEV_WDT] + i * awc->offset);
}
/* Net */
arm/aspeed: Rework NIC attachment The number of MACs supported by an Aspeed SoC is defined by "macs_num" under the SoC model, that is two for the AST2400 and AST2500 and four for the AST2600. The model initializes the maximum number of supported MACs but the number of realized devices is capped by the number of network device back-ends defined on the command line. This can leave unrealized devices hanging around in the QOM composition tree. To get virtual hardware that matches the physical hardware, you have to pass exactly as many -nic options as there are MACs, and some of them must be -nic none: * Machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc: two -nic, and the second one must be -nic none. * Machine ast2600-evb: four -nic, the first one must be -nic none. * Machine tacoma-bmc: four nic, the first two and the last one must be -nic none. Modify the machine initialization to define which MACs are attached to a network device back-end using a bit-field property "macs-mask" and let the SoC realize all network devices. The default setting of "macs-mask" is "use MAC0" only, which works for all our AST2400 and AST2500 machines. The AST2600 machines have different configurations. The AST2600 EVB machine activates MAC1, MAC2 and MAC3 and the Tacoma BMC machine activates MAC2. Incompatible CLI change: -nic options now apply to *active* MACs: MAC1, MAC2, MAC3 for ast2600-evb, MAC2 for tacoma-bmc, and MAC0 for all the others. The machines now always get all MACs as they should. Visible in "info qom-tree", here's the change for tacoma-bmc: /machine (tacoma-bmc-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) [...] /ftgmac100[0] (ftgmac100) /ftgmac100[0] (qemu:memory-region) /ftgmac100[1] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[2] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[3] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) [...] /mii[0] (aspeed-mmi) /aspeed-mmi[0] (qemu:memory-region) /mii[1] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[2] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[3] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) Also visible in "info qtree"; here's the change for tacoma-bmc: dev: ftgmac100, id "" gpio-out "sysbus-irq" 1 aspeed = true - mac = "52:54:00:12:34:56" - netdev = "hub0port0" + mac = "52:54:00:12:34:57" + netdev = "" mmio 000000001e660000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:58" netdev = "" + mmio 000000001e680000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" - netdev = "" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:56" + netdev = "hub0port0" + mmio 000000001e670000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:59" netdev = "" + mmio 000000001e690000/0000000000002000 [...] dev: aspeed-mmi, id "" mmio 000000001e650000/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650008/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650010/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650018/0000000000000008 Inactive MACs will have no peer and QEMU may warn the user with : qemu-system-arm: warning: nic ftgmac100.0 has no peer qemu-system-arm: warning: nic ftgmac100.1 has no peer qemu-system-arm: warning: nic ftgmac100.3 has no peer Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-6-armbru@redhat.com>
2020-06-09 15:23:20 +03:00
for (i = 0; i < sc->macs_num; i++) {
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_bool(OBJECT(&s->ftgmac100[i]), "aspeed", true,
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->ftgmac100[i]), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
sc->memmap[ASPEED_DEV_ETH1 + i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_ETH1 + i));
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_link(OBJECT(&s->mii[i]), "nic",
OBJECT(&s->ftgmac100[i]), &error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->mii[i]), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->mii[i]), 0,
sc->memmap[ASPEED_DEV_MII1 + i]);
}
/* XDMA */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->xdma), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->xdma), 0,
sc->memmap[ASPEED_DEV_XDMA]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_XDMA));
/* GPIO */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, sc->memmap[ASPEED_DEV_GPIO]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_GPIO));
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio_1_8v), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio_1_8v), 0,
sc->memmap[ASPEED_DEV_GPIO_1_8V]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio_1_8v), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_GPIO_1_8V));
/* SDHCI */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0,
sc->memmap[ASPEED_DEV_SDHCI]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
/* eMMC */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_DEV_EMMC]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_EMMC));
/* LPC */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->lpc), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->lpc), 0, sc->memmap[ASPEED_DEV_LPC]);
/* Connect the LPC IRQ to the GIC. It is otherwise unused. */
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_LPC));
/*
* On the AST2600 LPC subdevice IRQs are connected straight to the GIC.
*
* LPC subdevice IRQ sources are offset from 1 because the LPC model caters
* to the AST2400 and AST2500. SoCs before the AST2600 have one LPC IRQ
* shared across the subdevices, and the shared IRQ output to the VIC is at
* offset 0.
*/
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_1,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_1));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_2,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_2));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_3,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_3));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_4,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_4));
/* HACE */
object_property_set_link(OBJECT(&s->hace), "dram", OBJECT(s->dram_mr),
&error_abort);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->hace), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->hace), 0, sc->memmap[ASPEED_DEV_HACE]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->hace), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_HACE));
}
static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc);
dc->realize = aspeed_soc_ast2600_realize;
sc->name = "ast2600-a1";
sc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7");
sc->silicon_rev = AST2600_A1_SILICON_REV;
sc->sram_size = 0x16400;
sc->spis_num = 2;
sc->ehcis_num = 2;
sc->wdts_num = 4;
sc->macs_num = 4;
sc->irqmap = aspeed_soc_ast2600_irqmap;
sc->memmap = aspeed_soc_ast2600_memmap;
sc->num_cpus = 2;
}
static const TypeInfo aspeed_soc_ast2600_type_info = {
.name = "ast2600-a1",
.parent = TYPE_ASPEED_SOC,
.instance_size = sizeof(AspeedSoCState),
.instance_init = aspeed_soc_ast2600_init,
.class_init = aspeed_soc_ast2600_class_init,
.class_size = sizeof(AspeedSoCClass),
};
static void aspeed_soc_register_types(void)
{
type_register_static(&aspeed_soc_ast2600_type_info);
};
type_init(aspeed_soc_register_types)