qemu/hw/i386/acpi-dsdt.hex.generated

3598 lines
20 KiB
Plaintext
Raw Normal View History

static unsigned char AcpiDsdtAmlCode[] = {
0x44,
0x53,
0x44,
0x54,
0x8,
0xe,
0x0,
0x0,
0x1,
0xfc,
0x42,
0x58,
0x50,
0x43,
0x0,
0x0,
0x42,
0x58,
0x44,
0x53,
0x44,
0x54,
0x0,
0x0,
0x1,
0x0,
0x0,
0x0,
0x49,
0x4e,
0x54,
0x4c,
0x28,
0x8,
0x14,
0x20,
0x10,
0x49,
0x4,
0x5c,
0x0,
0x5b,
0x80,
0x44,
0x42,
0x47,
0x5f,
0x1,
0xb,
0x2,
0x4,
0x1,
0x5b,
0x81,
0xb,
0x44,
0x42,
0x47,
0x5f,
0x1,
0x44,
0x42,
0x47,
0x42,
0x8,
0x14,
0x2c,
0x44,
0x42,
0x55,
0x47,
0x1,
0x98,
0x68,
0x60,
0x96,
0x60,
0x60,
0x74,
0x87,
0x60,
0x1,
0x61,
0x70,
0x0,
0x62,
0xa2,
0x10,
0x95,
0x62,
0x61,
0x70,
0x83,
0x88,
0x60,
0x62,
0x0,
0x44,
0x42,
0x47,
0x42,
0x75,
0x62,
0x70,
0xa,
0xa,
0x44,
0x42,
0x47,
0x42,
0x10,
0x22,
0x5f,
0x53,
0x42,
0x5f,
0x5b,
0x82,
0x1b,
0x50,
0x43,
0x49,
0x30,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xa,
0x3,
0x8,
0x5f,
0x41,
0x44,
0x52,
0x0,
0x8,
0x5f,
0x55,
0x49,
0x44,
0x1,
0x10,
0x4e,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x18,
0x2e,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x8,
0x43,
0x52,
0x45,
0x53,
0x11,
0x42,
0xa,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0xa,
0x9e,
0x88,
0xd,
0x0,
0x2,
0xc,
0x0,
0x0,
0x0,
0x0,
0x0,
0xff,
0x0,
0x0,
0x0,
0x0,
0x1,
0x47,
0x1,
0xf8,
0xc,
0xf8,
0xc,
0x1,
0x8,
0x88,
0xd,
0x0,
0x1,
0xc,
0x3,
0x0,
0x0,
0x0,
0x0,
0xf7,
0xc,
0x0,
0x0,
0xf8,
0xc,
0x88,
0xd,
0x0,
0x1,
0xc,
0x3,
0x0,
0x0,
0x0,
0xd,
0xff,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0xad,
0x0,
0x0,
0x0,
0xa1,
0x88,
0xd,
0x0,
0x1,
0xc,
0x3,
0x0,
0x0,
0xf,
0xae,
0xff,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0xae,
0x0,
0x0,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0xf1,
0x0,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x88,
0xd,
0x0,
0x1,
0xc,
0x3,
0x0,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x0,
0x20,
0xaf,
0xdf,
0xaf,
0x0,
0x0,
0xc0,
0x0,
0x88,
0xd,
0x0,
0x1,
0xc,
0x3,
0x0,
0x0,
0xe4,
0xaf,
0xff,
0xff,
0x0,
0x0,
0x1c,
0x50,
0x87,
0x17,
0x0,
0x0,
0xc,
0x3,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0xa,
0x0,
0xff,
0xff,
0xb,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x2,
0x0,
0x87,
0x17,
0x0,
0x0,
0xc,
0x1,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0xe0,
0xff,
0xff,
0xbf,
0xfe,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0xc0,
0x1e,
0x79,
0x0,
0x8,
0x43,
0x52,
0x36,
0x34,
0x11,
0x33,
0xa,
0x30,
0x8a,
0x2b,
0x0,
0x0,
0xc,
0x3,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x80,
0x0,
0x0,
0x0,
0xff,
0xff,
0xff,
0xff,
0xff,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x80,
0x0,
0x0,
0x0,
0x79,
0x0,
0x14,
0x41,
0xa,
0x5f,
0x43,
0x52,
0x53,
0x0,
0x8a,
0x43,
0x52,
0x45,
0x53,
0xa,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x8c,
0x50,
0x53,
0x33,
0x32,
0x8a,
0x43,
0x52,
0x45,
0x53,
0xa,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x90,
0x50,
0x45,
0x33,
0x32,
0x8a,
0x43,
0x52,
0x45,
0x53,
0xa,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x98,
0x50,
0x4c,
0x33,
0x32,
0x70,
0x50,
0x30,
0x53,
0x5f,
0x50,
0x53,
0x33,
0x32,
0x70,
0x50,
0x30,
0x45,
0x5f,
0x50,
0x45,
0x33,
0x32,
0x70,
0x72,
0x74,
0x50,
0x30,
0x45,
0x5f,
0x50,
0x30,
0x53,
0x5f,
0x0,
0x1,
0x0,
0x50,
0x4c,
0x33,
0x32,
0xa0,
0xc,
0x93,
0x50,
0x31,
0x56,
0x5f,
0x0,
0xa4,
0x43,
0x52,
0x45,
0x53,
0x8f,
0x43,
0x52,
0x36,
0x34,
0xa,
0xe,
0x50,
0x53,
0x36,
0x34,
0x8f,
0x43,
0x52,
0x36,
0x34,
0xa,
0x16,
0x50,
0x45,
0x36,
0x34,
0x8f,
0x43,
0x52,
0x36,
0x34,
0xa,
0x26,
0x50,
0x4c,
0x36,
0x34,
0x70,
0x50,
0x31,
0x53,
0x5f,
0x50,
0x53,
0x36,
0x34,
0x70,
0x50,
0x31,
0x45,
0x5f,
0x50,
0x45,
0x36,
0x34,
0x70,
0x50,
0x31,
0x4c,
0x5f,
0x50,
0x4c,
0x36,
0x34,
0x84,
0x43,
0x52,
0x45,
0x53,
0x43,
0x52,
0x36,
0x34,
0x60,
0xa4,
0x60,
0x10,
0x4d,
0x8,
0x5f,
0x53,
0x42,
0x5f,
0x5b,
0x82,
0x45,
0x8,
0x48,
0x50,
0x45,
0x54,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0x1,
0x3,
0x8,
0x5f,
0x55,
0x49,
0x44,
0x0,
0x5b,
0x80,
0x48,
0x50,
0x54,
0x4d,
0x0,
0xc,
0x0,
0x0,
0xd0,
0xfe,
0xb,
0x0,
0x4,
0x5b,
0x81,
0x10,
0x48,
0x50,
0x54,
0x4d,
0x13,
0x56,
0x45,
0x4e,
0x44,
0x20,
0x50,
0x52,
0x44,
0x5f,
0x20,
0x14,
0x36,
0x5f,
0x53,
0x54,
0x41,
0x0,
0x70,
0x56,
0x45,
0x4e,
0x44,
0x60,
0x70,
0x50,
0x52,
0x44,
0x5f,
0x61,
0x7a,
0x60,
0xa,
0x10,
0x60,
0xa0,
0xc,
0x91,
0x93,
0x60,
0x0,
0x93,
0x60,
0xb,
0xff,
0xff,
0xa4,
0x0,
0xa0,
0xe,
0x91,
0x93,
0x61,
0x0,
0x94,
0x61,
0xc,
0x0,
0xe1,
0xf5,
0x5,
0xa4,
0x0,
0xa4,
0xa,
0xf,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x11,
0xa,
0xe,
0x86,
0x9,
0x0,
0x0,
0x0,
0x0,
0xd0,
0xfe,
0x0,
0x4,
0x0,
0x0,
0x79,
0x0,
0x10,
0x25,
0x2e,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x5b,
0x82,
0x19,
0x50,
0x58,
0x31,
0x33,
0x8,
0x5f,
0x41,
0x44,
0x52,
0xc,
0x3,
0x0,
0x1,
0x0,
0x5b,
0x80,
0x50,
0x31,
0x33,
0x43,
0x2,
0x0,
0xa,
0xff,
0x10,
0x46,
0x5,
0x2e,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x5b,
0x82,
0x49,
0x4,
0x49,
0x53,
0x41,
0x5f,
0x8,
0x5f,
0x41,
0x44,
0x52,
0xc,
0x0,
0x0,
0x1,
0x0,
0x5b,
0x80,
0x50,
0x34,
0x30,
0x43,
0x2,
0xa,
0x60,
0xa,
0x4,
0x5b,
0x81,
0x26,
0x5e,
0x2e,
0x50,
0x58,
0x31,
0x33,
0x50,
0x31,
0x33,
0x43,
0x0,
0x0,
0x48,
0x2f,
0x0,
0x7,
0x4c,
0x50,
0x45,
0x4e,
0x1,
0x0,
0x38,
0x0,
0x3,
0x43,
0x41,
0x45,
0x4e,
0x1,
0x0,
0x3,
0x43,
0x42,
0x45,
0x4e,
0x1,
0x8,
0x46,
0x44,
0x45,
0x4e,
0x1,
0x10,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x4a,
0x1e,
0x2f,
0x3,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x49,
0x53,
0x41,
0x5f,
0x5b,
0x82,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x2c,
0x53,
0x4d,
0x43,
0x5f,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x6,
0x10,
0x0,
0x1,
0x8,
0x5f,
0x53,
0x54,
0x41,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0xa,
0xf0,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x10,
0xa,
0xd,
0x47,
0x1,
0x0,
0x3,
0x0,
0x3,
0x1,
0x20,
0x22,
0x40,
0x0,
0x79,
0x0,
0x5b,
0x82,
0x2d,
0x52,
0x54,
0x43,
0x5f,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xb,
0x0,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x18,
0xa,
0x15,
0x47,
0x1,
0x70,
0x0,
0x70,
0x0,
0x10,
0x2,
0x22,
0x0,
0x1,
0x47,
0x1,
0x72,
0x0,
0x72,
0x0,
0x2,
0x6,
0x79,
0x0,
0x5b,
0x82,
0x37,
0x4b,
0x42,
0x44,
0x5f,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0x3,
0x3,
0x14,
0x9,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa4,
0xa,
0xf,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x18,
0xa,
0x15,
0x47,
0x1,
0x60,
0x0,
0x60,
0x0,
0x1,
0x1,
0x47,
0x1,
0x64,
0x0,
0x64,
0x0,
0x1,
0x1,
0x22,
0x2,
0x0,
0x79,
0x0,
0x5b,
0x82,
0x27,
0x4d,
0x4f,
0x55,
0x5f,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xf,
0x13,
0x14,
0x9,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa4,
0xa,
0xf,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x8,
0xa,
0x5,
0x22,
0x0,
0x10,
0x79,
0x0,
0x5b,
0x82,
0x4a,
0x4,
0x46,
0x44,
0x43,
0x30,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0x7,
0x0,
0x14,
0x18,
0x5f,
0x53,
0x54,
0x41,
0x0,
0x70,
0x46,
0x44,
0x45,
0x4e,
0x60,
0xa0,
0x6,
0x93,
0x60,
0x0,
0xa4,
0x0,
0xa1,
0x4,
0xa4,
0xa,
0xf,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x1b,
0xa,
0x18,
0x47,
0x1,
0xf2,
0x3,
0xf2,
0x3,
0x0,
0x4,
0x47,
0x1,
0xf7,
0x3,
0xf7,
0x3,
0x0,
0x1,
0x22,
0x40,
0x0,
0x2a,
0x4,
0x0,
0x79,
0x0,
0x5b,
0x82,
0x3e,
0x4c,
0x50,
0x54,
0x5f,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0x4,
0x0,
0x14,
0x18,
0x5f,
0x53,
0x54,
0x41,
0x0,
0x70,
0x4c,
0x50,
0x45,
0x4e,
0x60,
0xa0,
0x6,
0x93,
0x60,
0x0,
0xa4,
0x0,
0xa1,
0x4,
0xa4,
0xa,
0xf,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x10,
0xa,
0xd,
0x47,
0x1,
0x78,
0x3,
0x78,
0x3,
0x8,
0x8,
0x22,
0x80,
0x0,
0x79,
0x0,
0x5b,
0x82,
0x45,
0x4,
0x43,
0x4f,
0x4d,
0x31,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0x5,
0x1,
0x8,
0x5f,
0x55,
0x49,
0x44,
0x1,
0x14,
0x18,
0x5f,
0x53,
0x54,
0x41,
0x0,
0x70,
0x43,
0x41,
0x45,
0x4e,
0x60,
0xa0,
0x6,
0x93,
0x60,
0x0,
0xa4,
0x0,
0xa1,
0x4,
0xa4,
0xa,
0xf,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x10,
0xa,
0xd,
0x47,
0x1,
0xf8,
0x3,
0xf8,
0x3,
0x0,
0x8,
0x22,
0x10,
0x0,
0x79,
0x0,
0x5b,
0x82,
0x46,
0x4,
0x43,
0x4f,
0x4d,
0x32,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0x5,
0x1,
0x8,
0x5f,
0x55,
0x49,
0x44,
0xa,
0x2,
0x14,
0x18,
0x5f,
0x53,
0x54,
0x41,
0x0,
0x70,
0x43,
0x42,
0x45,
0x4e,
0x60,
0xa0,
0x6,
0x93,
0x60,
0x0,
0xa4,
0x0,
0xa1,
0x4,
0xa4,
0xa,
0xf,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0x10,
0xa,
0xd,
0x47,
0x1,
0xf8,
0x2,
0xf8,
0x2,
0x0,
0x8,
0x22,
0x8,
0x0,
0x79,
0x0,
0x10,
0x48,
0x8,
0x2e,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x5b,
0x80,
0x50,
0x43,
0x53,
0x54,
0x1,
0xb,
0x0,
0xae,
0xa,
0x8,
0x5b,
0x81,
0x10,
0x50,
0x43,
0x53,
0x54,
0x43,
0x50,
0x43,
0x49,
0x55,
0x20,
0x50,
0x43,
0x49,
0x44,
0x20,
0x5b,
0x80,
0x53,
0x45,
0x4a,
0x5f,
0x1,
0xb,
0x8,
0xae,
0xa,
0x4,
0x5b,
0x81,
0xb,
0x53,
0x45,
0x4a,
0x5f,
0x43,
0x42,
0x30,
0x45,
0x4a,
0x20,
0x5b,
0x80,
0x42,
0x4e,
0x4d,
0x52,
0x1,
0xb,
0x10,
0xae,
0xa,
0x4,
0x5b,
0x81,
0xb,
0x42,
0x4e,
0x4d,
0x52,
0x43,
0x42,
0x4e,
0x55,
0x4d,
0x20,
0x5b,
0x1,
0x42,
0x4c,
0x43,
0x4b,
0x0,
0x14,
0x25,
0x50,
0x43,
0x45,
0x4a,
0x2,
0x5b,
0x23,
0x42,
0x4c,
0x43,
0x4b,
0xff,
0xff,
0x70,
0x68,
0x42,
0x4e,
0x55,
0x4d,
0x70,
0x79,
0x1,
0x69,
0x0,
0x42,
0x30,
0x45,
0x4a,
0x5b,
0x27,
0x42,
0x4c,
0x43,
0x4b,
0xa4,
0x0,
0x10,
0x4e,
0x36,
0x5f,
0x53,
0x42,
0x5f,
0x10,
0x4b,
0xa,
0x50,
0x43,
0x49,
0x30,
0x14,
0x44,
0xa,
0x5f,
0x50,
0x52,
0x54,
0x0,
0x70,
0x12,
0x2,
0x80,
0x60,
0x70,
0x0,
0x61,
0xa2,
0x42,
0x9,
0x95,
0x61,
0xa,
0x80,
0x70,
0x7a,
0x61,
0xa,
0x2,
0x0,
0x62,
0x70,
0x7b,
0x72,
0x61,
0x62,
0x0,
0xa,
0x3,
0x0,
0x63,
0xa0,
0x10,
0x93,
0x63,
0x0,
0x70,
0x12,
0x9,
0x4,
0x0,
0x0,
0x4c,
0x4e,
0x4b,
0x44,
0x0,
0x64,
0xa0,
0x24,
0x93,
0x63,
0x1,
0xa0,
0x11,
0x93,
0x61,
0xa,
0x4,
0x70,
0x12,
0x9,
0x4,
0x0,
0x0,
0x4c,
0x4e,
0x4b,
0x53,
0x0,
0x64,
0xa1,
0xd,
0x70,
0x12,
0x9,
0x4,
0x0,
0x0,
0x4c,
0x4e,
0x4b,
0x41,
0x0,
0x64,
0xa0,
0x11,
0x93,
0x63,
0xa,
0x2,
0x70,
0x12,
0x9,
0x4,
0x0,
0x0,
0x4c,
0x4e,
0x4b,
0x42,
0x0,
0x64,
0xa0,
0x11,
0x93,
0x63,
0xa,
0x3,
0x70,
0x12,
0x9,
0x4,
0x0,
0x0,
0x4c,
0x4e,
0x4b,
0x43,
0x0,
0x64,
0x70,
0x7d,
0x79,
0x62,
0xa,
0x10,
0x0,
0xb,
0xff,
0xff,
0x0,
0x88,
0x64,
0x0,
0x0,
0x70,
0x7b,
0x61,
0xa,
0x3,
0x0,
0x88,
0x64,
0x1,
0x0,
0x70,
0x64,
0x88,
0x60,
0x61,
0x0,
0x75,
0x61,
0xa4,
0x60,
0x5b,
0x81,
0x24,
0x2f,
0x3,
0x50,
0x43,
0x49,
0x30,
0x49,
0x53,
0x41,
0x5f,
0x50,
0x34,
0x30,
0x43,
0x1,
0x50,
0x52,
0x51,
0x30,
0x8,
0x50,
0x52,
0x51,
0x31,
0x8,
0x50,
0x52,
0x51,
0x32,
0x8,
0x50,
0x52,
0x51,
0x33,
0x8,
0x14,
0x13,
0x49,
0x51,
0x53,
0x54,
0x1,
0xa0,
0x9,
0x7b,
0xa,
0x80,
0x68,
0x0,
0xa4,
0xa,
0x9,
0xa4,
0xa,
0xb,
0x14,
0x36,
0x49,
0x51,
0x43,
0x52,
ACPI DSDT: Make control method `IQCR` serialized Forward-port the following commit from seabios: commit 995bbeef78b338370f426bf8d0399038c3fa259c Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Thu Oct 3 11:30:52 2013 +0200 The ASL Optimizing Compiler version 20130823-32 [Sep 11 2013] issues the following warning. $ make […] Compiling IASL out/src/fw/acpi-dsdt.hex out/src/fw/acpi-dsdt.dsl.i 360: Method(IQCR, 1, NotSerialized) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) […] ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19181 bytes, 316 keywords AML Output: out/src/fw/acpi-dsdt.aml - 4407 bytes, 159 named objects, 157 executable opcodes Listing File: out/src/fw/acpi-dsdt.lst - 143715 bytes Hex Dump: out/src/fw/acpi-dsdt.hex - 41661 bytes Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 246 Optimizations […] After changing the parameter from `NotSerialized` to `Serialized`, the remark is indeed gone and there is no size change. The remark was added in ACPICA version 20130517 [1] and gives the following explanation. If a thread blocks within the method for any reason, and another thread enters the method, the method will fail because an attempt will be made to create the same (named) object twice. In this case, issue a remark that the method should be marked serialized. ACPICA BZ 909. [1] https://github.com/acpica/acpica/commit/ba84d0fc18ba910a47a3f71c68a43543c06e6831 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reported-by: Marcel Apfelbaum <marcel.a@redhat.com> Tested-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-14 16:12:47 +04:00
0x9,
0x8,
0x50,
0x52,
0x52,
0x30,
0x11,
0xe,
0xa,
0xb,
0x89,
0x6,
0x0,
0x9,
0x1,
0x0,
0x0,
0x0,
0x0,
0x79,
0x0,
0x8a,
0x50,
0x52,
0x52,
0x30,
0xa,
0x5,
0x50,
0x52,
0x52,
0x49,
0xa0,
0xb,
0x95,
0x68,
0xa,
0x80,
0x70,
0x68,
0x50,
0x52,
0x52,
0x49,
0xa4,
0x50,
0x52,
0x52,
0x30,
0x5b,
0x82,
0x4c,
0x7,
0x4c,
0x4e,
0x4b,
0x41,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xc,
0xf,
0x8,
0x5f,
0x55,
0x49,
0x44,
0x0,
0x8,
0x5f,
0x50,
0x52,
0x53,
0x11,
0x16,
0xa,
0x13,
0x89,
0xe,
0x0,
0x9,
0x3,
0x5,
0x0,
0x0,
0x0,
0xa,
0x0,
0x0,
0x0,
0xb,
0x0,
0x0,
0x0,
0x79,
0x0,
0x14,
0xf,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa4,
0x49,
0x51,
0x53,
0x54,
0x50,
0x52,
0x51,
0x30,
0x14,
0x11,
0x5f,
0x44,
0x49,
0x53,
0x0,
0x7d,
0x50,
0x52,
0x51,
0x30,
0xa,
0x80,
0x50,
0x52,
0x51,
0x30,
0x14,
0xf,
0x5f,
0x43,
0x52,
0x53,
0x0,
0xa4,
0x49,
0x51,
0x43,
0x52,
0x50,
0x52,
0x51,
0x30,
0x14,
0x17,
0x5f,
0x53,
0x52,
0x53,
0x1,
0x8a,
0x68,
0xa,
0x5,
0x50,
0x52,
0x52,
0x49,
0x70,
0x50,
0x52,
0x52,
0x49,
0x50,
0x52,
0x51,
0x30,
0x5b,
0x82,
0x4c,
0x7,
0x4c,
0x4e,
0x4b,
0x42,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xc,
0xf,
0x8,
0x5f,
0x55,
0x49,
0x44,
0x1,
0x8,
0x5f,
0x50,
0x52,
0x53,
0x11,
0x16,
0xa,
0x13,
0x89,
0xe,
0x0,
0x9,
0x3,
0x5,
0x0,
0x0,
0x0,
0xa,
0x0,
0x0,
0x0,
0xb,
0x0,
0x0,
0x0,
0x79,
0x0,
0x14,
0xf,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa4,
0x49,
0x51,
0x53,
0x54,
0x50,
0x52,
0x51,
0x31,
0x14,
0x11,
0x5f,
0x44,
0x49,
0x53,
0x0,
0x7d,
0x50,
0x52,
0x51,
0x31,
0xa,
0x80,
0x50,
0x52,
0x51,
0x31,
0x14,
0xf,
0x5f,
0x43,
0x52,
0x53,
0x0,
0xa4,
0x49,
0x51,
0x43,
0x52,
0x50,
0x52,
0x51,
0x31,
0x14,
0x17,
0x5f,
0x53,
0x52,
0x53,
0x1,
0x8a,
0x68,
0xa,
0x5,
0x50,
0x52,
0x52,
0x49,
0x70,
0x50,
0x52,
0x52,
0x49,
0x50,
0x52,
0x51,
0x31,
0x5b,
0x82,
0x4d,
0x7,
0x4c,
0x4e,
0x4b,
0x43,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xc,
0xf,
0x8,
0x5f,
0x55,
0x49,
0x44,
0xa,
0x2,
0x8,
0x5f,
0x50,
0x52,
0x53,
0x11,
0x16,
0xa,
0x13,
0x89,
0xe,
0x0,
0x9,
0x3,
0x5,
0x0,
0x0,
0x0,
0xa,
0x0,
0x0,
0x0,
0xb,
0x0,
0x0,
0x0,
0x79,
0x0,
0x14,
0xf,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa4,
0x49,
0x51,
0x53,
0x54,
0x50,
0x52,
0x51,
0x32,
0x14,
0x11,
0x5f,
0x44,
0x49,
0x53,
0x0,
0x7d,
0x50,
0x52,
0x51,
0x32,
0xa,
0x80,
0x50,
0x52,
0x51,
0x32,
0x14,
0xf,
0x5f,
0x43,
0x52,
0x53,
0x0,
0xa4,
0x49,
0x51,
0x43,
0x52,
0x50,
0x52,
0x51,
0x32,
0x14,
0x17,
0x5f,
0x53,
0x52,
0x53,
0x1,
0x8a,
0x68,
0xa,
0x5,
0x50,
0x52,
0x52,
0x49,
0x70,
0x50,
0x52,
0x52,
0x49,
0x50,
0x52,
0x51,
0x32,
0x5b,
0x82,
0x4d,
0x7,
0x4c,
0x4e,
0x4b,
0x44,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xc,
0xf,
0x8,
0x5f,
0x55,
0x49,
0x44,
0xa,
0x3,
0x8,
0x5f,
0x50,
0x52,
0x53,
0x11,
0x16,
0xa,
0x13,
0x89,
0xe,
0x0,
0x9,
0x3,
0x5,
0x0,
0x0,
0x0,
0xa,
0x0,
0x0,
0x0,
0xb,
0x0,
0x0,
0x0,
0x79,
0x0,
0x14,
0xf,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa4,
0x49,
0x51,
0x53,
0x54,
0x50,
0x52,
0x51,
0x33,
0x14,
0x11,
0x5f,
0x44,
0x49,
0x53,
0x0,
0x7d,
0x50,
0x52,
0x51,
0x33,
0xa,
0x80,
0x50,
0x52,
0x51,
0x33,
0x14,
0xf,
0x5f,
0x43,
0x52,
0x53,
0x0,
0xa4,
0x49,
0x51,
0x43,
0x52,
0x50,
0x52,
0x51,
0x33,
0x14,
0x17,
0x5f,
0x53,
0x52,
0x53,
0x1,
0x8a,
0x68,
0xa,
0x5,
0x50,
0x52,
0x52,
0x49,
0x70,
0x50,
0x52,
0x52,
0x49,
0x50,
0x52,
0x51,
0x33,
0x5b,
0x82,
0x4f,
0x4,
0x4c,
0x4e,
0x4b,
0x53,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
0x41,
0xd0,
0xc,
0xf,
0x8,
0x5f,
0x55,
0x49,
0x44,
0xa,
0x4,
0x8,
0x5f,
0x50,
0x52,
0x53,
0x11,
0xe,
0xa,
0xb,
0x89,
0x6,
0x0,
0x9,
0x1,
0x9,
0x0,
0x0,
0x0,
0x79,
0x0,
0x14,
0x9,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa4,
0xa,
0xb,
0x14,
0x6,
0x5f,
0x44,
0x49,
0x53,
0x0,
0x14,
0xb,
0x5f,
0x43,
0x52,
0x53,
0x0,
0xa4,
0x5f,
0x50,
0x52,
0x53,
0x14,
0x6,
0x5f,
0x53,
0x52,
0x53,
0x1,
0x10,
0x42,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x11,
0x5f,
0x53,
0x42,
0x5f,
0x14,
0x35,
0x43,
0x50,
0x4d,
0x41,
0x1,
0x70,
0x83,
0x88,
0x43,
0x50,
0x4f,
0x4e,
0x68,
0x0,
0x60,
0x70,
0x11,
0xb,
0xa,
0x8,
0x0,
0x8,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x61,
0x70,
0x68,
0x88,
0x61,
0xa,
0x2,
0x0,
0x70,
0x68,
0x88,
0x61,
0xa,
0x3,
0x0,
0x70,
0x60,
0x88,
0x61,
0xa,
0x4,
0x0,
0xa4,
0x61,
0x14,
0x1a,
0x43,
0x50,
0x53,
0x54,
0x1,
0x70,
0x83,
0x88,
0x43,
0x50,
0x4f,
0x4e,
0x68,
0x0,
0x60,
0xa0,
0x5,
0x60,
0xa4,
0xa,
0xf,
0xa1,
0x3,
0xa4,
0x0,
0x14,
0xa,
0x43,
0x50,
0x45,
0x4a,
0x2,
0x5b,
0x22,
0xa,
0xc8,
0x5b,
0x80,
0x50,
0x52,
0x53,
0x54,
0x1,
0xb,
0x0,
0xaf,
0xa,
0x20,
0x5b,
0x81,
0xc,
0x50,
0x52,
0x53,
0x54,
0x1,
0x50,
0x52,
0x53,
0x5f,
0x40,
0x10,
0x14,
0x4a,
0x6,
0x50,
0x52,
0x53,
0x43,
0x0,
0x70,
0x50,
0x52,
0x53,
0x5f,
0x65,
0x70,
0x0,
0x62,
0x70,
0x0,
0x60,
0xa2,
0x46,
0x5,
0x95,
0x60,
0x87,
0x43,
0x50,
0x4f,
0x4e,
0x70,
0x83,
0x88,
0x43,
0x50,
0x4f,
0x4e,
0x60,
0x0,
0x61,
0xa0,
0xa,
0x7b,
0x60,
0xa,
0x7,
0x0,
0x7a,
0x62,
0x1,
0x62,
0xa1,
0xc,
0x70,
0x83,
0x88,
0x65,
0x7a,
0x60,
0xa,
0x3,
0x0,
0x0,
0x62,
0x70,
0x7b,
0x62,
0x1,
0x0,
0x63,
0xa0,
0x22,
0x92,
0x93,
0x61,
0x63,
0x70,
0x63,
0x88,
0x43,
0x50,
0x4f,
0x4e,
0x60,
0x0,
0xa0,
0xa,
0x93,
0x63,
0x1,
0x4e,
0x54,
0x46,
0x59,
0x60,
0x1,
0xa1,
0x8,
0x4e,
0x54,
0x46,
0x59,
0x60,
0xa,
0x3,
0x75,
0x60,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x5b,
0x82,
0x29,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x50,
0x52,
0x45,
0x53,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xc,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x41,
0xd0,
0xa,
0x6,
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0xd,
0xa,
0xa,
0x47,
0x1,
0x0,
0xaf,
0x0,
0xaf,
0x0,
0x20,
0x79,
0x0,
0x8,
0x5f,
0x53,
0x54,
0x41,
0xa,
0xb,
0x10,
0x40,
0x31,
0x2e,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x5b,
0x82,
0x43,
0x30,
0x4d,
0x48,
0x50,
0x44,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xd,
0x50,
0x4e,
0x50,
0x30,
0x41,
0x30,
0x36,
0x0,
0x8,
0x5f,
0x55,
0x49,
0x44,
0xd,
0x4d,
0x65,
0x6d,
0x6f,
0x72,
0x79,
0x20,
0x68,
0x6f,
0x74,
0x70,
0x6c,
0x75,
0x67,
0x20,
0x72,
0x65,
0x73,
0x6f,
0x75,
0x72,
0x63,
0x65,
0x73,
0x0,
0x5b,
0x80,
0x48,
0x50,
0x4d,
0x52,
0x1,
0xb,
0x0,
0xa,
0xa,
0x18,
0x8,
0x5f,
0x43,
0x52,
0x53,
0x11,
0xd,
0xa,
0xa,
0x47,
0x1,
0x0,
0xa,
0x0,
0xa,
0x0,
0x18,
0x79,
0x0,
0x14,
0x13,
0x5f,
0x53,
0x54,
0x41,
0x0,
0xa0,
0x9,
0x93,
0x4d,
0x44,
0x4e,
0x52,
0x0,
0xa4,
0x0,
0xa4,
0xa,
0xb,
0x5b,
0x81,
0x1f,
0x48,
0x50,
0x4d,
0x52,
0x3,
0x4d,
0x52,
0x42,
0x4c,
0x20,
0x4d,
0x52,
0x42,
0x48,
0x20,
0x4d,
0x52,
0x4c,
0x4c,
0x20,
0x4d,
0x52,
0x4c,
0x48,
0x20,
0x4d,
0x50,
0x58,
0x5f,
0x20,
0x5b,
0x81,
0x13,
0x48,
0x50,
0x4d,
0x52,
0x1,
0x0,
0x40,
0xa,
0x4d,
0x45,
0x53,
0x5f,
0x1,
0x4d,
0x49,
0x4e,
0x53,
0x1,
0x5b,
0x1,
0x4d,
0x4c,
0x43,
0x4b,
0x0,
0x5b,
0x81,
0x15,
0x48,
0x50,
0x4d,
0x52,
0x3,
0x4d,
0x53,
0x45,
0x4c,
0x20,
0x4d,
0x4f,
0x45,
0x56,
0x20,
0x4d,
0x4f,
0x53,
0x43,
0x20,
0x14,
0x4a,
0x4,
0x4d,
0x53,
0x43,
0x4e,
0x0,
0xa0,
0x9,
0x93,
0x4d,
0x44,
0x4e,
0x52,
0x0,
0xa4,
0x0,
0x70,
0x0,
0x60,
0x5b,
0x23,
0x4d,
0x4c,
0x43,
0x4b,
0xff,
0xff,
0xa2,
0x25,
0x95,
0x60,
0x4d,
0x44,
0x4e,
0x52,
0x70,
0x60,
0x4d,
0x53,
0x45,
0x4c,
0xa0,
0x13,
0x93,
0x4d,
0x49,
0x4e,
0x53,
0x1,
0x4d,
0x54,
0x46,
0x59,
0x60,
0x1,
0x70,
0x1,
0x4d,
0x49,
0x4e,
0x53,
0x72,
0x60,
0x1,
0x60,
0x5b,
0x27,
0x4d,
0x4c,
0x43,
0x4b,
0xa4,
0x1,
0x14,
0x2d,
0x4d,
0x52,
0x53,
0x54,
0x1,
0x70,
0x0,
0x60,
0x5b,
0x23,
0x4d,
0x4c,
0x43,
0x4b,
0xff,
0xff,
0x70,
0x99,
0x68,
0x0,
0x4d,
0x53,
0x45,
0x4c,
0xa0,
0xb,
0x93,
0x4d,
0x45,
0x53,
0x5f,
0x1,
0x70,
0xa,
0xf,
0x60,
0x5b,
0x27,
0x4d,
0x4c,
0x43,
0x4b,
0xa4,
0x60,
0x14,
0x41,
0x18,
0x4d,
0x43,
0x52,
0x53,
0x9,
0x5b,
0x23,
0x4d,
0x4c,
0x43,
0x4b,
0xff,
0xff,
0x70,
0x99,
0x68,
0x0,
0x4d,
0x53,
0x45,
0x4c,
0x8,
0x4d,
0x52,
0x36,
0x34,
0x11,
0x33,
0xa,
0x30,
0x8a,
0x2b,
0x0,
0x0,
0xc,
0x3,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0xfe,
0xff,
0xff,
0xff,
0xff,
0xff,
0xff,
0xff,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0xff,
0xff,
0xff,
0xff,
0xff,
0xff,
0xff,
0xff,
0x79,
0x0,
0x8a,
0x4d,
0x52,
0x36,
0x34,
0xa,
0xe,
0x4d,
0x49,
0x4e,
0x4c,
0x8a,
0x4d,
0x52,
0x36,
0x34,
0xa,
0x12,
0x4d,
0x49,
0x4e,
0x48,
0x8a,
0x4d,
0x52,
0x36,
0x34,
0xa,
0x26,
0x4c,
0x45,
0x4e,
0x4c,
0x8a,
0x4d,
0x52,
0x36,
0x34,
0xa,
0x2a,
0x4c,
0x45,
0x4e,
0x48,
0x8a,
0x4d,
0x52,
0x36,
0x34,
0xa,
0x16,
0x4d,
0x41,
0x58,
0x4c,
0x8a,
0x4d,
0x52,
0x36,
0x34,
0xa,
0x1a,
0x4d,
0x41,
0x58,
0x48,
0x70,
0x4d,
0x52,
0x42,
0x48,
0x4d,
0x49,
0x4e,
0x48,
0x70,
0x4d,
0x52,
0x42,
0x4c,
0x4d,
0x49,
0x4e,
0x4c,
0x70,
0x4d,
0x52,
0x4c,
0x48,
0x4c,
0x45,
0x4e,
0x48,
0x70,
0x4d,
0x52,
0x4c,
0x4c,
0x4c,
0x45,
0x4e,
0x4c,
0x72,
0x4d,
0x49,
0x4e,
0x4c,
0x4c,
0x45,
0x4e,
0x4c,
0x4d,
0x41,
0x58,
0x4c,
0x72,
0x4d,
0x49,
0x4e,
0x48,
0x4c,
0x45,
0x4e,
0x48,
0x4d,
0x41,
0x58,
0x48,
0xa0,
0x14,
0x95,
0x4d,
0x41,
0x58,
0x4c,
0x4d,
0x49,
0x4e,
0x4c,
0x72,
0x4d,
0x41,
0x58,
0x48,
0x1,
0x4d,
0x41,
0x58,
0x48,
0xa0,
0x11,
0x95,
0x4d,
0x41,
0x58,
0x4c,
0x1,
0x74,
0x4d,
0x41,
0x58,
0x48,
0x1,
0x4d,
0x41,
0x58,
0x48,
0x74,
0x4d,
0x41,
0x58,
0x4c,
0x1,
0x4d,
0x41,
0x58,
0x4c,
0xa0,
0x44,
0x7,
0x93,
0x4d,
0x41,
0x58,
0x48,
0x0,
0x8,
0x4d,
0x52,
0x33,
0x32,
0x11,
0x1f,
0xa,
0x1c,
0x87,
0x17,
0x0,
0x0,
0xc,
0x3,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0x0,
0xfe,
0xff,
0xff,
0xff,
0x0,
0x0,
0x0,
0x0,
0xff,
0xff,
0xff,
0xff,
0x79,
0x0,
0x8a,
0x4d,
0x52,
0x33,
0x32,
0xa,
0xa,
0x4d,
0x49,
0x4e,
0x5f,
0x8a,
0x4d,
0x52,
0x33,
0x32,
0xa,
0xe,
0x4d,
0x41,
0x58,
0x5f,
0x8a,
0x4d,
0x52,
0x33,
0x32,
0xa,
0x16,
0x4c,
0x45,
0x4e,
0x5f,
0x70,
0x4d,
0x49,
0x4e,
0x4c,
0x4d,
0x49,
0x4e,
0x5f,
0x70,
0x4d,
0x41,
0x58,
0x4c,
0x4d,
0x41,
0x58,
0x5f,
0x70,
0x4c,
0x45,
0x4e,
0x4c,
0x4c,
0x45,
0x4e,
0x5f,
0x5b,
0x27,
0x4d,
0x4c,
0x43,
0x4b,
0xa4,
0x4d,
0x52,
0x33,
0x32,
0x5b,
0x27,
0x4d,
0x4c,
0x43,
0x4b,
0xa4,
0x4d,
0x52,
0x36,
0x34,
0x14,
0x24,
0x4d,
0x50,
0x58,
0x4d,
0x1,
0x5b,
0x23,
0x4d,
0x4c,
0x43,
0x4b,
0xff,
0xff,
0x70,
0x99,
0x68,
0x0,
0x4d,
0x53,
0x45,
0x4c,
0x70,
0x4d,
0x50,
0x58,
0x5f,
0x60,
0x5b,
0x27,
0x4d,
0x4c,
0x43,
0x4b,
0xa4,
0x60,
0x14,
0x28,
0x4d,
0x4f,
0x53,
0x54,
0x4,
0x5b,
0x23,
0x4d,
0x4c,
0x43,
0x4b,
0xff,
0xff,
0x70,
0x99,
0x68,
0x0,
0x4d,
0x53,
0x45,
0x4c,
0x70,
0x69,
0x4d,
0x4f,
0x45,
0x56,
0x70,
0x6a,
0x4d,
0x4f,
0x53,
0x43,
0x5b,
0x27,
0x4d,
0x4c,
0x43,
0x4b,
0x10,
0x45,
0xd,
0x5f,
0x47,
0x50,
0x45,
0x8,
0x5f,
0x48,
0x49,
0x44,
0xd,
0x41,
0x43,
0x50,
0x49,
0x30,
0x30,
0x30,
0x36,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x30,
0x0,
0x14,
0x39,
0x5f,
0x45,
0x30,
0x31,
0x0,
0x5b,
0x23,
0x5c,
0x2f,
0x3,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x42,
0x4c,
0x43,
0x4b,
0xff,
0xff,
0x5c,
0x2f,
0x3,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x50,
0x43,
0x4e,
0x54,
0x5b,
0x27,
0x5c,
0x2f,
0x3,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x42,
0x4c,
0x43,
0x4b,
0x14,
0x10,
0x5f,
0x45,
0x30,
0x32,
0x0,
0x5c,
0x2e,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x52,
0x53,
0x43,
0x14,
0x19,
0x5f,
0x45,
0x30,
0x33,
0x0,
0x5c,
0x2f,
0x4,
0x5f,
0x53,
0x42,
0x5f,
0x50,
0x43,
0x49,
0x30,
0x4d,
0x48,
0x50,
0x44,
0x4d,
0x53,
0x43,
0x4e,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x34,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x35,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x36,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x37,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x38,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x39,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x41,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x42,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x43,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x44,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x45,
0x0,
0x14,
0x6,
0x5f,
0x4c,
0x30,
0x46,
0x0
};
static unsigned short piix_dsdt_applesmc_sta[] = {
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 19:43:47 +04:00
0x353
};