qemu/target/riscv/cpu_cfg.h

178 lines
4.5 KiB
C
Raw Normal View History

/*
* QEMU RISC-V CPU CFG
*
* Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
* Copyright (c) 2017-2018 SiFive, Inc.
* Copyright (c) 2021-2023 PLCT Lab
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef RISCV_CPU_CFG_H
#define RISCV_CPU_CFG_H
/*
* map is a 16-bit bitmap: the most significant set bit in map is the maximum
* satp mode that is supported. It may be chosen by the user and must respect
* what qemu implements (valid_1_10_32/64) and what the hw is capable of
* (supported bitmap below).
*
* init is a 16-bit bitmap used to make sure the user selected a correct
* configuration as per the specification.
*
* supported is a 16-bit bitmap used to reflect the hw capabilities.
*/
typedef struct {
uint16_t map, init, supported;
} RISCVSATPMap;
struct RISCVCPUConfig {
bool ext_zba;
bool ext_zbb;
bool ext_zbc;
bool ext_zbkb;
bool ext_zbkc;
bool ext_zbkx;
bool ext_zbs;
bool ext_zca;
bool ext_zcb;
bool ext_zcd;
bool ext_zce;
bool ext_zcf;
bool ext_zcmp;
bool ext_zcmt;
bool ext_zk;
bool ext_zkn;
bool ext_zknd;
bool ext_zkne;
bool ext_zknh;
bool ext_zkr;
bool ext_zks;
bool ext_zksed;
bool ext_zksh;
bool ext_zkt;
bool ext_ifencei;
bool ext_icsr;
bool ext_icbom;
bool ext_icboz;
bool ext_zicond;
bool ext_zihintpause;
bool ext_smstateen;
bool ext_sstc;
bool ext_svadu;
bool ext_svinval;
bool ext_svnapot;
bool ext_svpbmt;
bool ext_zdinx;
bool ext_zawrs;
riscv: Add support for the Zfa extension This patch introduces the RISC-V Zfa extension, which introduces additional floating-point instructions: * fli (load-immediate) with pre-defined immediates * fminm/fmaxm (like fmin/fmax but with different NaN behaviour) * fround/froundmx (round to integer) * fcvtmod.w.d (Modular Convert-to-Integer) * fmv* to access high bits of float register bigger than XLEN * Quiet comparison instructions (fleq/fltq) Zfa defines its instructions in combination with the following extensions: * single-precision floating-point (F) * double-precision floating-point (D) * quad-precision floating-point (Q) * half-precision floating-point (Zfh) Since QEMU does not support the RISC-V quad-precision floating-point ISA extension (Q), this patch does not include the instructions that depend on this extension. All other instructions are included in this patch. The Zfa specification can be found here: https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex The Zfa specifciation is frozen and is in public review since May 3, 2023: https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg The patch also includes a TCG test for the fcvtmod.w.d instruction. The test cases test for correct results and flag behaviour. Note, that the Zfa specification requires fcvtmod's flag behaviour to be identical to a fcvt with the same operands (which is also tested). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10 10:12:43 +03:00
bool ext_zfa;
bool ext_zfbfmin;
bool ext_zfh;
bool ext_zfhmin;
bool ext_zfinx;
bool ext_zhinx;
bool ext_zhinxmin;
bool ext_zve32f;
bool ext_zve64f;
bool ext_zve64d;
bool ext_zmmul;
bool ext_zvfbfmin;
bool ext_zvfbfwma;
bool ext_zvfh;
bool ext_zvfhmin;
bool ext_smaia;
bool ext_ssaia;
bool ext_sscofpmf;
bool rvv_ta_all_1s;
bool rvv_ma_all_1s;
uint32_t mvendorid;
uint64_t marchid;
uint64_t mimpid;
/* Vendor-specific custom extensions */
bool ext_xtheadba;
bool ext_xtheadbb;
bool ext_xtheadbs;
bool ext_xtheadcmo;
bool ext_xtheadcondmov;
bool ext_xtheadfmemidx;
bool ext_xtheadfmv;
bool ext_xtheadmac;
bool ext_xtheadmemidx;
bool ext_xtheadmempair;
bool ext_xtheadsync;
bool ext_XVentanaCondOps;
uint8_t pmu_num;
char *priv_spec;
char *user_spec;
char *bext_spec;
char *vext_spec;
uint16_t vlen;
uint16_t elen;
uint16_t cbom_blocksize;
uint16_t cboz_blocksize;
bool mmu;
bool pmp;
bool epmp;
bool debug;
bool misa_w;
bool short_isa_string;
#ifndef CONFIG_USER_ONLY
RISCVSATPMap satp_mode;
#endif
};
typedef struct RISCVCPUConfig RISCVCPUConfig;
/* Helper functions to test for extensions. */
static inline bool always_true_p(const RISCVCPUConfig *cfg __attribute__((__unused__)))
{
return true;
}
static inline bool has_xthead_p(const RISCVCPUConfig *cfg)
{
return cfg->ext_xtheadba || cfg->ext_xtheadbb ||
cfg->ext_xtheadbs || cfg->ext_xtheadcmo ||
cfg->ext_xtheadcondmov ||
cfg->ext_xtheadfmemidx || cfg->ext_xtheadfmv ||
cfg->ext_xtheadmac || cfg->ext_xtheadmemidx ||
cfg->ext_xtheadmempair || cfg->ext_xtheadsync;
}
#define MATERIALISE_EXT_PREDICATE(ext) \
static inline bool has_ ## ext ## _p(const RISCVCPUConfig *cfg) \
{ \
return cfg->ext_ ## ext ; \
}
MATERIALISE_EXT_PREDICATE(xtheadba)
MATERIALISE_EXT_PREDICATE(xtheadbb)
MATERIALISE_EXT_PREDICATE(xtheadbs)
MATERIALISE_EXT_PREDICATE(xtheadcmo)
MATERIALISE_EXT_PREDICATE(xtheadcondmov)
MATERIALISE_EXT_PREDICATE(xtheadfmemidx)
MATERIALISE_EXT_PREDICATE(xtheadfmv)
MATERIALISE_EXT_PREDICATE(xtheadmac)
MATERIALISE_EXT_PREDICATE(xtheadmemidx)
MATERIALISE_EXT_PREDICATE(xtheadmempair)
MATERIALISE_EXT_PREDICATE(xtheadsync)
MATERIALISE_EXT_PREDICATE(XVentanaCondOps)
#endif