qemu/hw/ppc/ppc405_boards.c

551 lines
17 KiB
C
Raw Normal View History

/*
* QEMU PowerPC 405 evaluation boards emulation
*
* Copyright (c) 2007 Jocelyn Mayer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
2016-03-14 11:01:28 +03:00
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "hw/ppc/ppc.h"
#include "ppc405.h"
#include "hw/timer/m48t59.h"
#include "hw/block/flash.h"
#include "sysemu/sysemu.h"
#include "sysemu/qtest.h"
#include "sysemu/reset.h"
#include "sysemu/block-backend.h"
#include "hw/boards.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
#include "hw/loader.h"
#include "exec/address-spaces.h"
#define BIOS_FILENAME "ppc405_rom.bin"
#define BIOS_SIZE (2 * MiB)
#define KERNEL_LOAD_ADDR 0x00000000
#define INITRD_LOAD_ADDR 0x01800000
#define USE_FLASH_BIOS
/*****************************************************************************/
/* PPC405EP reference board (IBM) */
/* Standalone board with:
* - PowerPC 405EP CPU
* - SDRAM (0x00000000)
* - Flash (0xFFF80000)
* - SRAM (0xFFF00000)
* - NVRAM (0xF0000000)
* - FPGA (0xF0300000)
*/
typedef struct ref405ep_fpga_t ref405ep_fpga_t;
struct ref405ep_fpga_t {
uint8_t reg0;
uint8_t reg1;
};
static uint64_t ref405ep_fpga_readb(void *opaque, hwaddr addr, unsigned size)
{
ref405ep_fpga_t *fpga;
uint32_t ret;
fpga = opaque;
switch (addr) {
case 0x0:
ret = fpga->reg0;
break;
case 0x1:
ret = fpga->reg1;
break;
default:
ret = 0;
break;
}
return ret;
}
static void ref405ep_fpga_writeb(void *opaque, hwaddr addr, uint64_t value,
unsigned size)
{
ref405ep_fpga_t *fpga;
fpga = opaque;
switch (addr) {
case 0x0:
/* Read only */
break;
case 0x1:
fpga->reg1 = value;
break;
default:
break;
}
}
static const MemoryRegionOps ref405ep_fpga_ops = {
.read = ref405ep_fpga_readb,
.write = ref405ep_fpga_writeb,
.impl.min_access_size = 1,
.impl.max_access_size = 1,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
.endianness = DEVICE_BIG_ENDIAN,
};
static void ref405ep_fpga_reset (void *opaque)
{
ref405ep_fpga_t *fpga;
fpga = opaque;
fpga->reg0 = 0x00;
fpga->reg1 = 0x0F;
}
static void ref405ep_fpga_init(MemoryRegion *sysmem, uint32_t base)
{
ref405ep_fpga_t *fpga;
MemoryRegion *fpga_memory = g_new(MemoryRegion, 1);
fpga = g_malloc0(sizeof(ref405ep_fpga_t));
memory_region_init_io(fpga_memory, NULL, &ref405ep_fpga_ops, fpga,
"fpga", 0x00000100);
memory_region_add_subregion(sysmem, base, fpga_memory);
qemu_register_reset(&ref405ep_fpga_reset, fpga);
}
static void ref405ep_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
char *filename;
ppc4xx_bd_info_t bd;
CPUPPCState *env;
qemu_irq *pic;
MemoryRegion *bios;
MemoryRegion *sram = g_new(MemoryRegion, 1);
ram_addr_t bdloc;
MemoryRegion *ram_memories = g_new(MemoryRegion, 2);
hwaddr ram_bases[2], ram_sizes[2];
target_ulong sram_size;
long bios_size;
//int phy_addr = 0;
//static int phy_addr = 1;
target_ulong kernel_base, initrd_base;
long kernel_size, initrd_size;
int linux_boot;
2019-03-08 12:46:03 +03:00
int len;
DriveInfo *dinfo;
MemoryRegion *sysmem = get_system_memory();
/* XXX: fix this */
memory_region_allocate_system_memory(&ram_memories[0], NULL, "ef405ep.ram",
0x08000000);
ram_bases[0] = 0;
ram_sizes[0] = 0x08000000;
memory_region_init(&ram_memories[1], NULL, "ef405ep.ram1", 0);
ram_bases[1] = 0x00000000;
ram_sizes[1] = 0x00000000;
ram_size = 128 * MiB;
env = ppc405ep_init(sysmem, ram_memories, ram_bases, ram_sizes,
33333333, &pic, kernel_filename == NULL ? 0 : 1);
/* allocate SRAM */
sram_size = 512 * KiB;
memory_region_init_ram(sram, NULL, "ef405ep.sram", sram_size,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 17:51:43 +03:00
&error_fatal);
memory_region_add_subregion(sysmem, 0xFFF00000, sram);
/* allocate and load BIOS */
#ifdef USE_FLASH_BIOS
2019-03-08 12:46:03 +03:00
dinfo = drive_get(IF_PFLASH, 0, 0);
if (dinfo) {
2019-03-08 12:46:03 +03:00
bios_size = 8 * MiB;
pflash_cfi02_register((uint32_t)(-bios_size),
"ef405ep.bios", bios_size,
2019-03-08 12:46:03 +03:00
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
64 * KiB, 1,
2, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
1);
} else
#endif
{
bios = g_new(MemoryRegion, 1);
memory_region_init_ram(bios, NULL, "ef405ep.bios", BIOS_SIZE,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 17:51:43 +03:00
&error_fatal);
if (bios_name == NULL)
bios_name = BIOS_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
bios_size = load_image_size(filename,
memory_region_get_ram_ptr(bios),
BIOS_SIZE);
g_free(filename);
if (bios_size < 0) {
error_report("Could not load PowerPC BIOS '%s'", bios_name);
exit(1);
}
bios_size = (bios_size + 0xfff) & ~0xfff;
memory_region_add_subregion(sysmem, (uint32_t)(-bios_size), bios);
} else if (!qtest_enabled() || kernel_filename != NULL) {
error_report("Could not load PowerPC BIOS '%s'", bios_name);
exit(1);
} else {
/* Avoid an uninitialized variable warning */
bios_size = -1;
}
memory_region_set_readonly(bios, true);
}
/* Register FPGA */
ref405ep_fpga_init(sysmem, 0xF0300000);
/* Register NVRAM */
m48t59_init(NULL, 0xF0000000, 0, 8192, 1968, 8);
/* Load kernel */
linux_boot = (kernel_filename != NULL);
if (linux_boot) {
memset(&bd, 0, sizeof(bd));
bd.bi_memstart = 0x00000000;
bd.bi_memsize = ram_size;
bd.bi_flashstart = -bios_size;
bd.bi_flashsize = -bios_size;
bd.bi_flashoffset = 0;
bd.bi_sramstart = 0xFFF00000;
bd.bi_sramsize = sram_size;
bd.bi_bootflags = 0;
bd.bi_intfreq = 133333333;
bd.bi_busfreq = 33333333;
bd.bi_baudrate = 115200;
bd.bi_s_version[0] = 'Q';
bd.bi_s_version[1] = 'M';
bd.bi_s_version[2] = 'U';
bd.bi_s_version[3] = '\0';
bd.bi_r_version[0] = 'Q';
bd.bi_r_version[1] = 'E';
bd.bi_r_version[2] = 'M';
bd.bi_r_version[3] = 'U';
bd.bi_r_version[4] = '\0';
bd.bi_procfreq = 133333333;
bd.bi_plb_busfreq = 33333333;
bd.bi_pci_busfreq = 33333333;
bd.bi_opbfreq = 33333333;
bdloc = ppc405_set_bootinfo(env, &bd, 0x00000001);
env->gpr[3] = bdloc;
kernel_base = KERNEL_LOAD_ADDR;
/* now we can load the kernel */
kernel_size = load_image_targphys(kernel_filename, kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
hw/ppc: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines were then manually tweaked to pass checkpatch and some curly braces were added to match QEMU style. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-ppc@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-10-armbru@redhat.com>
2018-02-03 11:43:10 +03:00
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
printf("Load kernel size %ld at " TARGET_FMT_lx,
kernel_size, kernel_base);
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
hw/ppc: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines were then manually tweaked to pass checkpatch and some curly braces were added to match QEMU style. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-ppc@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-10-armbru@redhat.com>
2018-02-03 11:43:10 +03:00
error_report("could not load initial ram disk '%s'",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
env->gpr[4] = initrd_base;
env->gpr[5] = initrd_size;
if (kernel_cmdline != NULL) {
len = strlen(kernel_cmdline);
bdloc -= ((len + 255) & ~255);
cpu_physical_memory_write(bdloc, kernel_cmdline, len + 1);
env->gpr[6] = bdloc;
env->gpr[7] = bdloc + len;
} else {
env->gpr[6] = 0;
env->gpr[7] = 0;
}
env->nip = KERNEL_LOAD_ADDR;
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
bdloc = 0;
}
}
static void ref405ep_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "ref405ep";
mc->init = ref405ep_init;
}
static const TypeInfo ref405ep_type = {
.name = MACHINE_TYPE_NAME("ref405ep"),
.parent = TYPE_MACHINE,
.class_init = ref405ep_class_init,
};
/*****************************************************************************/
/* AMCC Taihu evaluation board */
/* - PowerPC 405EP processor
* - SDRAM 128 MB at 0x00000000
* - Boot flash 2 MB at 0xFFE00000
* - Application flash 32 MB at 0xFC000000
* - 2 serial ports
* - 2 ethernet PHY
* - 1 USB 1.1 device 0x50000000
* - 1 LCD display 0x50100000
* - 1 CPLD 0x50100000
* - 1 I2C EEPROM
* - 1 I2C thermal sensor
* - a set of LEDs
* - bit-bang SPI port using GPIOs
* - 1 EBC interface connector 0 0x50200000
* - 1 cardbus controller + expansion slot.
* - 1 PCI expansion slot.
*/
typedef struct taihu_cpld_t taihu_cpld_t;
struct taihu_cpld_t {
uint8_t reg0;
uint8_t reg1;
};
static uint64_t taihu_cpld_read(void *opaque, hwaddr addr, unsigned size)
{
taihu_cpld_t *cpld;
uint32_t ret;
cpld = opaque;
switch (addr) {
case 0x0:
ret = cpld->reg0;
break;
case 0x1:
ret = cpld->reg1;
break;
default:
ret = 0;
break;
}
return ret;
}
static void taihu_cpld_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
taihu_cpld_t *cpld;
cpld = opaque;
switch (addr) {
case 0x0:
/* Read only */
break;
case 0x1:
cpld->reg1 = value;
break;
default:
break;
}
}
static const MemoryRegionOps taihu_cpld_ops = {
.read = taihu_cpld_read,
.write = taihu_cpld_write,
.impl = {
.min_access_size = 1,
.max_access_size = 1,
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void taihu_cpld_reset (void *opaque)
{
taihu_cpld_t *cpld;
cpld = opaque;
cpld->reg0 = 0x01;
cpld->reg1 = 0x80;
}
static void taihu_cpld_init(MemoryRegion *sysmem, uint32_t base)
{
taihu_cpld_t *cpld;
MemoryRegion *cpld_memory = g_new(MemoryRegion, 1);
cpld = g_malloc0(sizeof(taihu_cpld_t));
memory_region_init_io(cpld_memory, NULL, &taihu_cpld_ops, cpld, "cpld", 0x100);
memory_region_add_subregion(sysmem, base, cpld_memory);
qemu_register_reset(&taihu_cpld_reset, cpld);
}
static void taihu_405ep_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *initrd_filename = machine->initrd_filename;
char *filename;
qemu_irq *pic;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *bios;
MemoryRegion *ram_memories = g_new(MemoryRegion, 2);
MemoryRegion *ram = g_malloc0(sizeof(*ram));
hwaddr ram_bases[2], ram_sizes[2];
long bios_size;
target_ulong kernel_base, initrd_base;
long kernel_size, initrd_size;
int linux_boot;
2019-03-08 12:46:03 +03:00
int fl_idx;
DriveInfo *dinfo;
/* RAM is soldered to the board so the size cannot be changed */
ram_size = 0x08000000;
memory_region_allocate_system_memory(ram, NULL, "taihu_405ep.ram",
ram_size);
ram_bases[0] = 0;
ram_sizes[0] = 0x04000000;
memory_region_init_alias(&ram_memories[0], NULL,
"taihu_405ep.ram-0", ram, ram_bases[0],
ram_sizes[0]);
ram_bases[1] = 0x04000000;
ram_sizes[1] = 0x04000000;
memory_region_init_alias(&ram_memories[1], NULL,
"taihu_405ep.ram-1", ram, ram_bases[1],
ram_sizes[1]);
ppc405ep_init(sysmem, ram_memories, ram_bases, ram_sizes,
33333333, &pic, kernel_filename == NULL ? 0 : 1);
/* allocate and load BIOS */
fl_idx = 0;
#if defined(USE_FLASH_BIOS)
dinfo = drive_get(IF_PFLASH, 0, fl_idx);
if (dinfo) {
2019-03-08 12:46:03 +03:00
bios_size = 2 * MiB;
pflash_cfi02_register(0xFFE00000,
"taihu_405ep.bios", bios_size,
2019-03-08 12:46:03 +03:00
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
64 * KiB, 1,
4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
1);
fl_idx++;
} else
#endif
{
if (bios_name == NULL)
bios_name = BIOS_FILENAME;
bios = g_new(MemoryRegion, 1);
memory_region_init_ram(bios, NULL, "taihu_405ep.bios", BIOS_SIZE,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 17:51:43 +03:00
&error_fatal);
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
bios_size = load_image_size(filename,
memory_region_get_ram_ptr(bios),
BIOS_SIZE);
g_free(filename);
if (bios_size < 0) {
error_report("Could not load PowerPC BIOS '%s'", bios_name);
exit(1);
}
bios_size = (bios_size + 0xfff) & ~0xfff;
memory_region_add_subregion(sysmem, (uint32_t)(-bios_size), bios);
} else if (!qtest_enabled()) {
error_report("Could not load PowerPC BIOS '%s'", bios_name);
exit(1);
}
memory_region_set_readonly(bios, true);
}
/* Register Linux flash */
dinfo = drive_get(IF_PFLASH, 0, fl_idx);
if (dinfo) {
bios_size = 32 * MiB;
pflash_cfi02_register(0xfc000000, "taihu_405ep.flash", bios_size,
2019-03-08 12:46:03 +03:00
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
64 * KiB, 1,
4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
1);
fl_idx++;
}
/* Register CLPD & LCD display */
taihu_cpld_init(sysmem, 0x50100000);
/* Load kernel */
linux_boot = (kernel_filename != NULL);
if (linux_boot) {
kernel_base = KERNEL_LOAD_ADDR;
/* now we can load the kernel */
kernel_size = load_image_targphys(kernel_filename, kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
hw/ppc: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines were then manually tweaked to pass checkpatch and some curly braces were added to match QEMU style. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-ppc@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-10-armbru@redhat.com>
2018-02-03 11:43:10 +03:00
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
hw/ppc: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines were then manually tweaked to pass checkpatch and some curly braces were added to match QEMU style. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-ppc@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-10-armbru@redhat.com>
2018-02-03 11:43:10 +03:00
error_report("could not load initial ram disk '%s'",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
}
}
static void taihu_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "taihu";
mc->init = taihu_405ep_init;
}
static const TypeInfo taihu_type = {
.name = MACHINE_TYPE_NAME("taihu"),
.parent = TYPE_MACHINE,
.class_init = taihu_class_init,
};
static void ppc405_machine_init(void)
{
type_register_static(&ref405ep_type);
type_register_static(&taihu_type);
}
type_init(ppc405_machine_init)