qemu/hw/ppc/Kconfig

151 lines
2.4 KiB
Plaintext
Raw Normal View History

config PSERIES
bool
imply PCI_DEVICES
imply TEST_DEVICES
imply VIRTIO_VGA
imply NVDIMM
select DIMM
select PCI
select SPAPR_VSCSI
select VFIO if LINUX # needed by spapr_pci_vfio.c
select XICS
select XIVE
select MSI_NONBROKEN
select FDT_PPC
select CHRP_NVRAM
spapr: Implement Open Firmware client interface The PAPR platform describes an OS environment that's presented by a combination of a hypervisor and firmware. The features it specifies require collaboration between the firmware and the hypervisor. Since the beginning, the runtime component of the firmware (RTAS) has been implemented as a 20 byte shim which simply forwards it to a hypercall implemented in qemu. The boot time firmware component is SLOF - but a build that's specific to qemu, and has always needed to be updated in sync with it. Even though we've managed to limit the amount of runtime communication we need between qemu and SLOF, there's some, and it has become increasingly awkward to handle as we've implemented new features. This implements a boot time OF client interface (CI) which is enabled by a new "x-vof" pseries machine option (stands for "Virtual Open Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall which implements Open Firmware Client Interface (OF CI). This allows using a smaller stateless firmware which does not have to manage the device tree. The new "vof.bin" firmware image is included with source code under pc-bios/. It also includes RTAS blob. This implements a handful of CI methods just to get -kernel/-initrd working. In particular, this implements the device tree fetching and simple memory allocator - "claim" (an OF CI memory allocator) and updates "/memory@0/available" to report the client about available memory. This implements changing some device tree properties which we know how to deal with, the rest is ignored. To allow changes, this skips fdt_pack() when x-vof=on as not packing the blob leaves some room for appending. In absence of SLOF, this assigns phandles to device tree nodes to make device tree traversing work. When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree. This adds basic instances support which are managed by a hash map ihandle -> [phandle]. Before the guest started, the used memory is: 0..e60 - the initial firmware 8000..10000 - stack 400000.. - kernel 3ea0000.. - initramdisk This OF CI does not implement "interpret". Unlike SLOF, this does not format uninitialized nvram. Instead, this includes a disk image with pre-formatted nvram. With this basic support, this can only boot into kernel directly. However this is just enough for the petitboot kernel and initradmdisk to boot from any possible source. Note this requires reasonably recent guest kernel with: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735 The immediate benefit is much faster booting time which especially crucial with fully emulated early CPU bring up environments. Also this may come handy when/if GRUB-in-the-userspace sees light of the day. This separates VOF and sPAPR in a hope that VOF bits may be reused by other POWERPC boards which do not support pSeries. This assumes potential support for booting from QEMU backends such as blockdev or netdev without devices/drivers used. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> [dwg: Adjusted some includes which broke compile in some more obscure compilation setups] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-25 08:51:55 +03:00
select VOF
config SPAPR_RNG
bool
default y
depends on PSERIES
config POWERNV
bool
imply PCI_DEVICES
imply TEST_DEVICES
select ISA_IPMI_BT
select IPMI_LOCAL
select ISA_BUS
select MC146818RTC
select XICS
select XIVE
select FDT_PPC
select PCI_POWERNV
config PPC405
bool
select M48T59
select PFLASH_CFI02
select PPC4XX
select SERIAL
config PPC440
bool
imply PCI_DEVICES
imply TEST_DEVICES
imply E1000_PCI
select PCI_EXPRESS
select PPC4XX
select SERIAL
select FDT_PPC
config PPC4XX
bool
select BITBANG_I2C
select PCI
select PPC_UIC
config SAM460EX
bool
select PPC405
select PFLASH_CFI01
select IDE_SII3112
select M41T80
select PPC440
select SERIAL
select SM501
select SMBUS_EEPROM
select USB_EHCI_SYSBUS
select USB_OHCI
select FDT_PPC
config PEGASOS2
bool
select MV64361
select VT82C686
select IDE_VIA
select SMBUS_EEPROM
# This should come with VT82C686
select ACPI_X86
config PREP
bool
imply PCI_DEVICES
imply TEST_DEVICES
select CS4231A
select PREP_PCI
select I82378
select LSI_SCSI_PCI
select M48T59
select PC87312
select RS6000_MC
select FW_CFG_PPC
config RS6000_MC
bool
config MAC_OLDWORLD
bool
imply PCI_DEVICES
imply SUNGEM
imply TEST_DEVICES
select ADB
select GRACKLE_PCI
select HEATHROW_PIC
select MACIO
select FW_CFG_PPC
config MAC_NEWWORLD
bool
imply PCI_DEVICES
imply SUNGEM
imply TEST_DEVICES
select ADB
select MACIO
select MACIO_GPIO
select MAC_PMU
select UNIN_PCI
select FW_CFG_PPC
config E500
bool
imply AT24C
imply VIRTIO_PCI
select ETSEC
select OPENPIC
select PLATFORM_BUS
select PPCE500_PCI
select SERIAL
select MPC_I2C
select FDT_PPC
config VIRTEX
bool
select PPC4XX
select PFLASH_CFI01
select SERIAL
select XILINX
select XILINX_ETHLITE
select FDT_PPC
# Only used by 64-bit targets
config FW_CFG_PPC
bool
config FDT_PPC
bool
spapr: Implement Open Firmware client interface The PAPR platform describes an OS environment that's presented by a combination of a hypervisor and firmware. The features it specifies require collaboration between the firmware and the hypervisor. Since the beginning, the runtime component of the firmware (RTAS) has been implemented as a 20 byte shim which simply forwards it to a hypercall implemented in qemu. The boot time firmware component is SLOF - but a build that's specific to qemu, and has always needed to be updated in sync with it. Even though we've managed to limit the amount of runtime communication we need between qemu and SLOF, there's some, and it has become increasingly awkward to handle as we've implemented new features. This implements a boot time OF client interface (CI) which is enabled by a new "x-vof" pseries machine option (stands for "Virtual Open Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall which implements Open Firmware Client Interface (OF CI). This allows using a smaller stateless firmware which does not have to manage the device tree. The new "vof.bin" firmware image is included with source code under pc-bios/. It also includes RTAS blob. This implements a handful of CI methods just to get -kernel/-initrd working. In particular, this implements the device tree fetching and simple memory allocator - "claim" (an OF CI memory allocator) and updates "/memory@0/available" to report the client about available memory. This implements changing some device tree properties which we know how to deal with, the rest is ignored. To allow changes, this skips fdt_pack() when x-vof=on as not packing the blob leaves some room for appending. In absence of SLOF, this assigns phandles to device tree nodes to make device tree traversing work. When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree. This adds basic instances support which are managed by a hash map ihandle -> [phandle]. Before the guest started, the used memory is: 0..e60 - the initial firmware 8000..10000 - stack 400000.. - kernel 3ea0000.. - initramdisk This OF CI does not implement "interpret". Unlike SLOF, this does not format uninitialized nvram. Instead, this includes a disk image with pre-formatted nvram. With this basic support, this can only boot into kernel directly. However this is just enough for the petitboot kernel and initradmdisk to boot from any possible source. Note this requires reasonably recent guest kernel with: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735 The immediate benefit is much faster booting time which especially crucial with fully emulated early CPU bring up environments. Also this may come handy when/if GRUB-in-the-userspace sees light of the day. This separates VOF and sPAPR in a hope that VOF bits may be reused by other POWERPC boards which do not support pSeries. This assumes potential support for booting from QEMU backends such as blockdev or netdev without devices/drivers used. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> [dwg: Adjusted some includes which broke compile in some more obscure compilation setups] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-25 08:51:55 +03:00
config VOF
bool