qemu/include/hw/ptimer.h

280 lines
10 KiB
C
Raw Normal View History

/*
* General purpose implementation of a simple periodic countdown timer.
*
* Copyright (c) 2007 CodeSourcery.
*
* This code is licensed under the GNU LGPL.
*/
#ifndef PTIMER_H
#define PTIMER_H
#include "qemu/timer.h"
/*
* The ptimer API implements a simple periodic countdown timer.
* The countdown timer has a value (which can be read and written via
* ptimer_get_count() and ptimer_set_count()). When it is enabled
* using ptimer_run(), the value will count downwards at the frequency
* which has been configured using ptimer_set_period() or ptimer_set_freq().
* When it reaches zero it will trigger a callback function, and
* can be set to either reload itself from a specified limit value
* and keep counting down, or to stop (as a one-shot timer).
*
* A transaction-based API is used for modifying ptimer state: all calls
* to functions which modify ptimer state must be between matched calls to
* ptimer_transaction_begin() and ptimer_transaction_commit().
* When ptimer_transaction_commit() is called it will evaluate the state
* of the timer after all the changes in the transaction, and call the
* callback if necessary. (See the ptimer_init() documentation for the full
* list of state-modifying functions and detailed semantics of the callback.)
*
* Forgetting to set the period/frequency (or setting it to zero) is a
* bug in the QEMU device and will cause warning messages to be printed
* to stderr when the guest attempts to enable the timer.
*/
/* The default ptimer policy retains backward compatibility with the legacy
* timers. Custom policies are adjusting the default one. Consider providing
* a correct policy for your timer.
*
* The rough edges of the default policy:
* - Starting to run with a period = 0 emits error message and stops the
* timer without a trigger.
*
* - Setting period to 0 of the running timer emits error message and
* stops the timer without a trigger.
*
* - Starting to run with counter = 0 or setting it to "0" while timer
* is running causes a trigger and reloads counter with a limit value.
* If limit = 0, ptimer emits error message and stops the timer.
*
* - Counter value of the running timer is one less than the actual value.
*
* - Changing period/frequency of the running timer loses time elapsed
* since the last period, effectively restarting the timer with a
* counter = counter value at the moment of change (.i.e. one less).
*/
#define PTIMER_POLICY_DEFAULT 0
/* Periodic timer counter stays with "0" for a one period before wrapping
* around. */
#define PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD (1 << 0)
/* Running periodic timer that has counter = limit = 0 would continuously
* re-trigger every period. */
#define PTIMER_POLICY_CONTINUOUS_TRIGGER (1 << 1)
/* Starting to run with/setting counter to "0" won't trigger immediately,
* but after a one period for both oneshot and periodic modes. */
#define PTIMER_POLICY_NO_IMMEDIATE_TRIGGER (1 << 2)
/* Starting to run with/setting counter to "0" won't re-load counter
* immediately, but after a one period. */
#define PTIMER_POLICY_NO_IMMEDIATE_RELOAD (1 << 3)
/* Make counter value of the running timer represent the actual value and
* not the one less. */
#define PTIMER_POLICY_NO_COUNTER_ROUND_DOWN (1 << 4)
/*
* Starting to run with a zero counter, or setting the counter to "0" via
* ptimer_set_count() or ptimer_set_limit() will not trigger the timer
* (though it will cause a reload). Only a counter decrement to "0"
* will cause a trigger. Not compatible with NO_IMMEDIATE_TRIGGER;
* ptimer_init() will assert() that you don't set both.
*/
#define PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT (1 << 5)
/* ptimer.c */
typedef struct ptimer_state ptimer_state;
typedef void (*ptimer_cb)(void *opaque);
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
/**
* ptimer_init - Allocate and return a new ptimer
* @callback: function to call on ptimer expiry
* @callback_opaque: opaque pointer passed to @callback
* @policy: PTIMER_POLICY_* bits specifying behaviour
*
* The ptimer returned must be freed using ptimer_free().
*
* If a ptimer is created using this API then will use the
* transaction-based API for modifying ptimer state: all calls
* to functions which modify ptimer state:
* - ptimer_set_period()
* - ptimer_set_freq()
* - ptimer_set_limit()
* - ptimer_set_count()
* - ptimer_run()
* - ptimer_stop()
* must be between matched calls to ptimer_transaction_begin()
* and ptimer_transaction_commit(). When ptimer_transaction_commit()
* is called it will evaluate the state of the timer after all the
* changes in the transaction, and call the callback if necessary.
*
* The callback function is always called from within a transaction
* begin/commit block, so the callback should not call the
* ptimer_transaction_begin() function itself. If the callback changes
* the ptimer state such that another ptimer expiry is triggered, then
* the callback will be called a second time after the first call returns.
*/
ptimer_state *ptimer_init(ptimer_cb callback,
void *callback_opaque,
uint8_t policy_mask);
/**
* ptimer_free - Free a ptimer
* @s: timer to free
*
* Free a ptimer created using ptimer_init().
*/
void ptimer_free(ptimer_state *s);
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
/**
* ptimer_transaction_begin() - Start a ptimer modification transaction
*
* This function must be called before making any calls to functions
* which modify the ptimer's state (see the ptimer_init() documentation
* for a list of these), and must always have a matched call to
* ptimer_transaction_commit().
* It is an error to call this function for a BH-based ptimer;
* attempting to do this will trigger an assert.
*/
void ptimer_transaction_begin(ptimer_state *s);
/**
* ptimer_transaction_commit() - Commit a ptimer modification transaction
*
* This function must be called after calls to functions which modify
* the ptimer's state, and completes the update of the ptimer. If the
* ptimer state now means that we should trigger the timer expiry
* callback, it will be called directly.
*/
void ptimer_transaction_commit(ptimer_state *s);
/**
* ptimer_set_period - Set counter increment interval in nanoseconds
* @s: ptimer to configure
* @period: period of the counter in nanoseconds
*
* Note that if your counter behaviour is specified as having a
* particular frequency rather than a period then ptimer_set_freq()
* may be more appropriate.
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
*
* This function will assert if it is called outside a
* ptimer_transaction_begin/commit block.
*/
void ptimer_set_period(ptimer_state *s, int64_t period);
/**
* ptimer_set_freq - Set counter frequency in Hz
* @s: ptimer to configure
* @freq: counter frequency in Hz
*
* This does the same thing as ptimer_set_period(), so you only
* need to call one of them. If the counter behaviour is specified
* as setting the frequency then this function is more appropriate,
* because it allows specifying an effective period which is
* precise to fractions of a nanosecond, avoiding rounding errors.
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
*
* This function will assert if it is called outside a
* ptimer_transaction_begin/commit block.
*/
void ptimer_set_freq(ptimer_state *s, uint32_t freq);
/**
* ptimer_get_limit - Get the configured limit of the ptimer
* @s: ptimer to query
*
* This function returns the current limit (reload) value
* of the down-counter; that is, the value which it will be
* reset to when it hits zero.
*
* Generally timer devices using ptimers should be able to keep
* their reload register state inside the ptimer using the get
* and set limit functions rather than needing to also track it
* in their own state structure.
*/
uint64_t ptimer_get_limit(ptimer_state *s);
/**
* ptimer_set_limit - Set the limit of the ptimer
* @s: ptimer
* @limit: initial countdown value
* @reload: if nonzero, then reset the counter to the new limit
*
* Set the limit value of the down-counter. The @reload flag can
* be used to emulate the behaviour of timers which immediately
* reload the counter when their reload register is written to.
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
*
* This function will assert if it is called outside a
* ptimer_transaction_begin/commit block.
*/
void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload);
/**
* ptimer_get_count - Get the current value of the ptimer
* @s: ptimer
*
* Return the current value of the down-counter. This will
* return the correct value whether the counter is enabled or
* disabled.
*/
uint64_t ptimer_get_count(ptimer_state *s);
/**
* ptimer_set_count - Set the current value of the ptimer
* @s: ptimer
* @count: count value to set
*
* Set the value of the down-counter. If the counter is currently
* enabled this will arrange for a timer callback at the appropriate
* point in the future.
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
*
* This function will assert if it is called outside a
* ptimer_transaction_begin/commit block.
*/
void ptimer_set_count(ptimer_state *s, uint64_t count);
/**
* ptimer_run - Start a ptimer counting
* @s: ptimer
* @oneshot: non-zero if this timer should only count down once
*
* Start a ptimer counting down; when it reaches zero the callback function
* passed to ptimer_init() will be invoked.
* If the @oneshot argument is zero,
* the counter value will then be reloaded from the limit and it will
* start counting down again. If @oneshot is non-zero, then the counter
* will disable itself when it reaches zero.
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
*
* This function will assert if it is called outside a
* ptimer_transaction_begin/commit block.
*/
void ptimer_run(ptimer_state *s, int oneshot);
/**
* ptimer_stop - Stop a ptimer counting
* @s: ptimer
*
* Pause a timer (the count stays at its current value until ptimer_run()
* is called to start it counting again).
*
* Note that this can cause it to "lose" time, even if it is immediately
* restarted.
ptimer: Provide new transaction-based API Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
2019-10-08 20:17:21 +03:00
*
* This function will assert if it is called outside a
* ptimer_transaction_begin/commit block.
*/
void ptimer_stop(ptimer_state *s);
extern const VMStateDescription vmstate_ptimer;
#define VMSTATE_PTIMER(_field, _state) \
VMSTATE_STRUCT_POINTER_V(_field, _state, 1, vmstate_ptimer, ptimer_state)
#define VMSTATE_PTIMER_ARRAY(_f, _s, _n) \
VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(_f, _s, _n, 0, \
vmstate_ptimer, ptimer_state)
#endif