2012-12-17 21:20:04 +04:00
|
|
|
#include "sysemu/sysemu.h"
|
2011-04-01 08:15:20 +04:00
|
|
|
#include "cpu.h"
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
#include "helper_regs.h"
|
2013-02-05 20:06:20 +04:00
|
|
|
#include "hw/ppc/spapr.h"
|
2013-03-12 04:31:18 +04:00
|
|
|
#include "mmu-hash64.h"
|
spapr: Implement processor compatibility in ibm, client-architecture-support
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.
>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.
This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-05-23 06:26:57 +04:00
|
|
|
#include "cpu-models.h"
|
|
|
|
#include "trace.h"
|
|
|
|
#include "kvm_ppc.h"
|
2011-04-01 08:15:22 +04:00
|
|
|
|
2014-03-07 08:37:40 +04:00
|
|
|
struct SPRSyncState {
|
|
|
|
CPUState *cs;
|
|
|
|
int spr;
|
|
|
|
target_ulong value;
|
|
|
|
target_ulong mask;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void do_spr_sync(void *arg)
|
|
|
|
{
|
|
|
|
struct SPRSyncState *s = arg;
|
|
|
|
PowerPCCPU *cpu = POWERPC_CPU(s->cs);
|
|
|
|
CPUPPCState *env = &cpu->env;
|
|
|
|
|
|
|
|
cpu_synchronize_state(s->cs);
|
|
|
|
env->spr[s->spr] &= ~s->mask;
|
|
|
|
env->spr[s->spr] |= s->value;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_spr(CPUState *cs, int spr, target_ulong value,
|
|
|
|
target_ulong mask)
|
|
|
|
{
|
|
|
|
struct SPRSyncState s = {
|
|
|
|
.cs = cs,
|
|
|
|
.spr = spr,
|
|
|
|
.value = value,
|
|
|
|
.mask = mask
|
|
|
|
};
|
|
|
|
run_on_cpu(cs, do_spr_sync, &s);
|
|
|
|
}
|
|
|
|
|
2011-04-01 08:15:22 +04:00
|
|
|
static target_ulong compute_tlbie_rb(target_ulong v, target_ulong r,
|
|
|
|
target_ulong pte_index)
|
|
|
|
{
|
|
|
|
target_ulong rb, va_low;
|
|
|
|
|
|
|
|
rb = (v & ~0x7fULL) << 16; /* AVA field */
|
|
|
|
va_low = pte_index >> 3;
|
2013-03-12 04:31:18 +04:00
|
|
|
if (v & HPTE64_V_SECONDARY) {
|
2011-04-01 08:15:22 +04:00
|
|
|
va_low = ~va_low;
|
|
|
|
}
|
|
|
|
/* xor vsid from AVA */
|
2013-03-12 04:31:18 +04:00
|
|
|
if (!(v & HPTE64_V_1TB_SEG)) {
|
2011-04-01 08:15:22 +04:00
|
|
|
va_low ^= v >> 12;
|
|
|
|
} else {
|
|
|
|
va_low ^= v >> 24;
|
|
|
|
}
|
|
|
|
va_low &= 0x7ff;
|
2013-03-12 04:31:18 +04:00
|
|
|
if (v & HPTE64_V_LARGE) {
|
2011-04-01 08:15:22 +04:00
|
|
|
rb |= 1; /* L field */
|
|
|
|
#if 0 /* Disable that P7 specific bit for now */
|
|
|
|
if (r & 0xff000) {
|
|
|
|
/* non-16MB large page, must be 64k */
|
|
|
|
/* (masks depend on page size) */
|
|
|
|
rb |= 0x1000; /* page encoding in LP field */
|
|
|
|
rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
|
|
|
|
rb |= (va_low & 0xfe); /* AVAL field */
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
} else {
|
|
|
|
/* 4kB page */
|
|
|
|
rb |= (va_low & 0x7ff) << 12; /* remaining 11b of AVA */
|
|
|
|
}
|
|
|
|
rb |= (v >> 54) & 0x300; /* B field */
|
|
|
|
return rb;
|
|
|
|
}
|
|
|
|
|
2014-02-20 21:52:17 +04:00
|
|
|
static inline bool valid_pte_index(CPUPPCState *env, target_ulong pte_index)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* hash value/pteg group index is normalized by htab_mask
|
|
|
|
*/
|
|
|
|
if (((pte_index & ~7ULL) / HPTES_PER_GROUP) & ~env->htab_mask) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_enter(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-04-01 08:15:22 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2012-05-03 08:23:01 +04:00
|
|
|
CPUPPCState *env = &cpu->env;
|
2011-04-01 08:15:22 +04:00
|
|
|
target_ulong flags = args[0];
|
|
|
|
target_ulong pte_index = args[1];
|
|
|
|
target_ulong pteh = args[2];
|
|
|
|
target_ulong ptel = args[3];
|
2011-08-04 01:02:19 +04:00
|
|
|
target_ulong page_shift = 12;
|
|
|
|
target_ulong raddr;
|
2014-02-20 21:52:24 +04:00
|
|
|
target_ulong index;
|
|
|
|
uint64_t token;
|
2011-04-01 08:15:22 +04:00
|
|
|
|
|
|
|
/* only handle 4k and 16M pages for now */
|
2013-03-12 04:31:18 +04:00
|
|
|
if (pteh & HPTE64_V_LARGE) {
|
2011-04-01 08:15:22 +04:00
|
|
|
#if 0 /* We don't support 64k pages yet */
|
|
|
|
if ((ptel & 0xf000) == 0x1000) {
|
|
|
|
/* 64k page */
|
|
|
|
} else
|
|
|
|
#endif
|
|
|
|
if ((ptel & 0xff000) == 0) {
|
|
|
|
/* 16M page */
|
2011-08-04 01:02:19 +04:00
|
|
|
page_shift = 24;
|
2011-04-01 08:15:22 +04:00
|
|
|
/* lowest AVA bit must be 0 for 16M pages */
|
|
|
|
if (pteh & 0x80) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-03-12 04:31:18 +04:00
|
|
|
raddr = (ptel & HPTE64_R_RPN) & ~((1ULL << page_shift) - 1);
|
2011-04-01 08:15:22 +04:00
|
|
|
|
2011-08-04 01:02:19 +04:00
|
|
|
if (raddr < spapr->ram_limit) {
|
|
|
|
/* Regular RAM - should have WIMG=0010 */
|
2013-03-12 04:31:18 +04:00
|
|
|
if ((ptel & HPTE64_R_WIMG) != HPTE64_R_M) {
|
2011-08-04 01:02:19 +04:00
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* Looks like an IO address */
|
|
|
|
/* FIXME: What WIMG combinations could be sensible for IO?
|
|
|
|
* For now we allow WIMG=010x, but are there others? */
|
|
|
|
/* FIXME: Should we check against registered IO addresses? */
|
2013-03-12 04:31:18 +04:00
|
|
|
if ((ptel & (HPTE64_R_W | HPTE64_R_I | HPTE64_R_M)) != HPTE64_R_I) {
|
2011-08-04 01:02:19 +04:00
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
2011-04-01 08:15:22 +04:00
|
|
|
}
|
2011-08-04 01:02:19 +04:00
|
|
|
|
2011-04-01 08:15:22 +04:00
|
|
|
pteh &= ~0x60ULL;
|
|
|
|
|
2014-02-20 21:52:17 +04:00
|
|
|
if (!valid_pte_index(env, pte_index)) {
|
2011-04-01 08:15:22 +04:00
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
2014-02-20 21:52:24 +04:00
|
|
|
|
|
|
|
index = 0;
|
2011-04-01 08:15:22 +04:00
|
|
|
if (likely((flags & H_EXACT) == 0)) {
|
|
|
|
pte_index &= ~7ULL;
|
2014-02-20 21:52:24 +04:00
|
|
|
token = ppc_hash64_start_access(cpu, pte_index);
|
2014-03-14 17:51:49 +04:00
|
|
|
for (; index < 8; index++) {
|
2014-02-20 21:52:24 +04:00
|
|
|
if ((ppc_hash64_load_hpte0(env, token, index) & HPTE64_V_VALID) == 0) {
|
2011-04-01 08:15:22 +04:00
|
|
|
break;
|
|
|
|
}
|
2014-03-14 17:51:49 +04:00
|
|
|
}
|
2014-02-20 21:52:24 +04:00
|
|
|
ppc_hash64_stop_access(token);
|
2014-03-14 17:51:49 +04:00
|
|
|
if (index == 8) {
|
|
|
|
return H_PTEG_FULL;
|
|
|
|
}
|
2011-04-01 08:15:22 +04:00
|
|
|
} else {
|
2014-02-20 21:52:24 +04:00
|
|
|
token = ppc_hash64_start_access(cpu, pte_index);
|
|
|
|
if (ppc_hash64_load_hpte0(env, token, 0) & HPTE64_V_VALID) {
|
|
|
|
ppc_hash64_stop_access(token);
|
2011-04-01 08:15:22 +04:00
|
|
|
return H_PTEG_FULL;
|
|
|
|
}
|
2014-02-20 21:52:24 +04:00
|
|
|
ppc_hash64_stop_access(token);
|
2011-04-01 08:15:22 +04:00
|
|
|
}
|
2014-02-20 21:52:24 +04:00
|
|
|
|
2014-02-20 21:52:31 +04:00
|
|
|
ppc_hash64_store_hpte(env, pte_index + index,
|
|
|
|
pteh | HPTE64_V_HPTE_DIRTY, ptel);
|
2011-04-01 08:15:22 +04:00
|
|
|
|
2014-02-20 21:52:24 +04:00
|
|
|
args[0] = pte_index + index;
|
2011-04-01 08:15:22 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2013-06-24 21:48:47 +04:00
|
|
|
typedef enum {
|
2011-08-31 19:50:50 +04:00
|
|
|
REMOVE_SUCCESS = 0,
|
|
|
|
REMOVE_NOT_FOUND = 1,
|
|
|
|
REMOVE_PARM = 2,
|
|
|
|
REMOVE_HW = 3,
|
2013-06-24 21:48:47 +04:00
|
|
|
} RemoveResult;
|
2011-08-31 19:50:50 +04:00
|
|
|
|
2013-06-24 21:48:47 +04:00
|
|
|
static RemoveResult remove_hpte(CPUPPCState *env, target_ulong ptex,
|
2011-08-31 19:50:50 +04:00
|
|
|
target_ulong avpn,
|
|
|
|
target_ulong flags,
|
|
|
|
target_ulong *vp, target_ulong *rp)
|
2011-04-01 08:15:22 +04:00
|
|
|
{
|
2014-02-20 21:52:24 +04:00
|
|
|
uint64_t token;
|
2011-04-01 08:15:22 +04:00
|
|
|
target_ulong v, r, rb;
|
|
|
|
|
2014-02-20 21:52:17 +04:00
|
|
|
if (!valid_pte_index(env, ptex)) {
|
2011-08-31 19:50:50 +04:00
|
|
|
return REMOVE_PARM;
|
2011-04-01 08:15:22 +04:00
|
|
|
}
|
|
|
|
|
2014-02-20 21:52:24 +04:00
|
|
|
token = ppc_hash64_start_access(ppc_env_get_cpu(env), ptex);
|
|
|
|
v = ppc_hash64_load_hpte0(env, token, 0);
|
|
|
|
r = ppc_hash64_load_hpte1(env, token, 0);
|
|
|
|
ppc_hash64_stop_access(token);
|
2011-04-01 08:15:22 +04:00
|
|
|
|
2013-03-12 04:31:18 +04:00
|
|
|
if ((v & HPTE64_V_VALID) == 0 ||
|
2011-04-01 08:15:22 +04:00
|
|
|
((flags & H_AVPN) && (v & ~0x7fULL) != avpn) ||
|
|
|
|
((flags & H_ANDCOND) && (v & avpn) != 0)) {
|
2011-08-31 19:50:50 +04:00
|
|
|
return REMOVE_NOT_FOUND;
|
2011-04-01 08:15:22 +04:00
|
|
|
}
|
2012-09-20 21:42:30 +04:00
|
|
|
*vp = v;
|
2011-08-31 19:50:50 +04:00
|
|
|
*rp = r;
|
2014-02-20 21:52:31 +04:00
|
|
|
ppc_hash64_store_hpte(env, ptex, HPTE64_V_HPTE_DIRTY, 0);
|
2011-08-31 19:50:50 +04:00
|
|
|
rb = compute_tlbie_rb(v, r, ptex);
|
2011-04-01 08:15:22 +04:00
|
|
|
ppc_tlb_invalidate_one(env, rb);
|
2011-08-31 19:50:50 +04:00
|
|
|
return REMOVE_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_remove(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-08-31 19:50:50 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2012-05-03 08:23:01 +04:00
|
|
|
CPUPPCState *env = &cpu->env;
|
2011-08-31 19:50:50 +04:00
|
|
|
target_ulong flags = args[0];
|
|
|
|
target_ulong pte_index = args[1];
|
|
|
|
target_ulong avpn = args[2];
|
2013-06-24 21:48:47 +04:00
|
|
|
RemoveResult ret;
|
2011-08-31 19:50:50 +04:00
|
|
|
|
|
|
|
ret = remove_hpte(env, pte_index, avpn, flags,
|
|
|
|
&args[0], &args[1]);
|
|
|
|
|
|
|
|
switch (ret) {
|
|
|
|
case REMOVE_SUCCESS:
|
|
|
|
return H_SUCCESS;
|
|
|
|
|
|
|
|
case REMOVE_NOT_FOUND:
|
|
|
|
return H_NOT_FOUND;
|
|
|
|
|
|
|
|
case REMOVE_PARM:
|
|
|
|
return H_PARAMETER;
|
|
|
|
|
|
|
|
case REMOVE_HW:
|
|
|
|
return H_HARDWARE;
|
|
|
|
}
|
|
|
|
|
2013-06-29 17:47:26 +04:00
|
|
|
g_assert_not_reached();
|
2011-08-31 19:50:50 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
#define H_BULK_REMOVE_TYPE 0xc000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_REQUEST 0x4000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_RESPONSE 0x8000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_END 0xc000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_CODE 0x3000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_SUCCESS 0x0000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_NOT_FOUND 0x1000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_PARM 0x2000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_HW 0x3000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_RC 0x0c00000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_FLAGS 0x0300000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_ABSOLUTE 0x0000000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_ANDCOND 0x0100000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_AVPN 0x0200000000000000ULL
|
|
|
|
#define H_BULK_REMOVE_PTEX 0x00ffffffffffffffULL
|
|
|
|
|
|
|
|
#define H_BULK_REMOVE_MAX_BATCH 4
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_bulk_remove(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-08-31 19:50:50 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2012-05-03 08:23:01 +04:00
|
|
|
CPUPPCState *env = &cpu->env;
|
2011-08-31 19:50:50 +04:00
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < H_BULK_REMOVE_MAX_BATCH; i++) {
|
|
|
|
target_ulong *tsh = &args[i*2];
|
|
|
|
target_ulong tsl = args[i*2 + 1];
|
|
|
|
target_ulong v, r, ret;
|
|
|
|
|
|
|
|
if ((*tsh & H_BULK_REMOVE_TYPE) == H_BULK_REMOVE_END) {
|
|
|
|
break;
|
|
|
|
} else if ((*tsh & H_BULK_REMOVE_TYPE) != H_BULK_REMOVE_REQUEST) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
|
|
|
*tsh &= H_BULK_REMOVE_PTEX | H_BULK_REMOVE_FLAGS;
|
|
|
|
*tsh |= H_BULK_REMOVE_RESPONSE;
|
|
|
|
|
|
|
|
if ((*tsh & H_BULK_REMOVE_ANDCOND) && (*tsh & H_BULK_REMOVE_AVPN)) {
|
|
|
|
*tsh |= H_BULK_REMOVE_PARM;
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = remove_hpte(env, *tsh & H_BULK_REMOVE_PTEX, tsl,
|
|
|
|
(*tsh & H_BULK_REMOVE_FLAGS) >> 26,
|
|
|
|
&v, &r);
|
|
|
|
|
|
|
|
*tsh |= ret << 60;
|
|
|
|
|
|
|
|
switch (ret) {
|
|
|
|
case REMOVE_SUCCESS:
|
2013-03-12 04:31:18 +04:00
|
|
|
*tsh |= (r & (HPTE64_R_C | HPTE64_R_R)) << 43;
|
2011-08-31 19:50:50 +04:00
|
|
|
break;
|
|
|
|
|
|
|
|
case REMOVE_PARM:
|
|
|
|
return H_PARAMETER;
|
|
|
|
|
|
|
|
case REMOVE_HW:
|
|
|
|
return H_HARDWARE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-04-01 08:15:22 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_protect(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-04-01 08:15:22 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2012-05-03 08:23:01 +04:00
|
|
|
CPUPPCState *env = &cpu->env;
|
2011-04-01 08:15:22 +04:00
|
|
|
target_ulong flags = args[0];
|
|
|
|
target_ulong pte_index = args[1];
|
|
|
|
target_ulong avpn = args[2];
|
2014-02-20 21:52:24 +04:00
|
|
|
uint64_t token;
|
2011-04-01 08:15:22 +04:00
|
|
|
target_ulong v, r, rb;
|
|
|
|
|
2014-02-20 21:52:17 +04:00
|
|
|
if (!valid_pte_index(env, pte_index)) {
|
2011-04-01 08:15:22 +04:00
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
2014-02-20 21:52:24 +04:00
|
|
|
token = ppc_hash64_start_access(cpu, pte_index);
|
|
|
|
v = ppc_hash64_load_hpte0(env, token, 0);
|
|
|
|
r = ppc_hash64_load_hpte1(env, token, 0);
|
|
|
|
ppc_hash64_stop_access(token);
|
2011-04-01 08:15:22 +04:00
|
|
|
|
2013-03-12 04:31:18 +04:00
|
|
|
if ((v & HPTE64_V_VALID) == 0 ||
|
2011-04-01 08:15:22 +04:00
|
|
|
((flags & H_AVPN) && (v & ~0x7fULL) != avpn)) {
|
|
|
|
return H_NOT_FOUND;
|
|
|
|
}
|
|
|
|
|
2013-03-12 04:31:18 +04:00
|
|
|
r &= ~(HPTE64_R_PP0 | HPTE64_R_PP | HPTE64_R_N |
|
|
|
|
HPTE64_R_KEY_HI | HPTE64_R_KEY_LO);
|
|
|
|
r |= (flags << 55) & HPTE64_R_PP0;
|
|
|
|
r |= (flags << 48) & HPTE64_R_KEY_HI;
|
|
|
|
r |= flags & (HPTE64_R_PP | HPTE64_R_N | HPTE64_R_KEY_LO);
|
2011-04-01 08:15:22 +04:00
|
|
|
rb = compute_tlbie_rb(v, r, pte_index);
|
2014-02-20 21:52:31 +04:00
|
|
|
ppc_hash64_store_hpte(env, pte_index,
|
|
|
|
(v & ~HPTE64_V_VALID) | HPTE64_V_HPTE_DIRTY, 0);
|
2011-04-01 08:15:22 +04:00
|
|
|
ppc_tlb_invalidate_one(env, rb);
|
|
|
|
/* Don't need a memory barrier, due to qemu's global lock */
|
2014-02-20 21:52:31 +04:00
|
|
|
ppc_hash64_store_hpte(env, pte_index, v | HPTE64_V_HPTE_DIRTY, r);
|
2011-04-01 08:15:22 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2013-02-18 09:00:32 +04:00
|
|
|
static target_ulong h_read(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
|
|
|
CPUPPCState *env = &cpu->env;
|
|
|
|
target_ulong flags = args[0];
|
|
|
|
target_ulong pte_index = args[1];
|
|
|
|
uint8_t *hpte;
|
|
|
|
int i, ridx, n_entries = 1;
|
|
|
|
|
2014-02-20 21:52:17 +04:00
|
|
|
if (!valid_pte_index(env, pte_index)) {
|
2013-02-18 09:00:32 +04:00
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (flags & H_READ_4) {
|
|
|
|
/* Clear the two low order bits */
|
|
|
|
pte_index &= ~(3ULL);
|
|
|
|
n_entries = 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
hpte = env->external_htab + (pte_index * HASH_PTE_SIZE_64);
|
|
|
|
|
|
|
|
for (i = 0, ridx = 0; i < n_entries; i++) {
|
|
|
|
args[ridx++] = ldq_p(hpte);
|
|
|
|
args[ridx++] = ldq_p(hpte + (HASH_PTE_SIZE_64/2));
|
|
|
|
hpte += HASH_PTE_SIZE_64;
|
|
|
|
}
|
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_set_dabr(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-04-01 08:15:24 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
|
|
|
/* FIXME: actually implement this */
|
|
|
|
return H_HARDWARE;
|
|
|
|
}
|
|
|
|
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
#define FLAGS_REGISTER_VPA 0x0000200000000000ULL
|
|
|
|
#define FLAGS_REGISTER_DTL 0x0000400000000000ULL
|
|
|
|
#define FLAGS_REGISTER_SLBSHADOW 0x0000600000000000ULL
|
|
|
|
#define FLAGS_DEREGISTER_VPA 0x0000a00000000000ULL
|
|
|
|
#define FLAGS_DEREGISTER_DTL 0x0000c00000000000ULL
|
|
|
|
#define FLAGS_DEREGISTER_SLBSHADOW 0x0000e00000000000ULL
|
|
|
|
|
|
|
|
#define VPA_MIN_SIZE 640
|
|
|
|
#define VPA_SIZE_OFFSET 0x4
|
|
|
|
#define VPA_SHARED_PROC_OFFSET 0x9
|
|
|
|
#define VPA_SHARED_PROC_VAL 0x2
|
|
|
|
|
2012-03-14 04:38:23 +04:00
|
|
|
static target_ulong register_vpa(CPUPPCState *env, target_ulong vpa)
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
{
|
2014-03-09 22:29:41 +04:00
|
|
|
CPUState *cs = CPU(ppc_env_get_cpu(env));
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
uint16_t size;
|
|
|
|
uint8_t tmp;
|
|
|
|
|
|
|
|
if (vpa == 0) {
|
|
|
|
hcall_dprintf("Can't cope with registering a VPA at logical 0\n");
|
|
|
|
return H_HARDWARE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (vpa % env->dcache_line_size) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
/* FIXME: bounds check the address */
|
|
|
|
|
2013-12-17 08:33:56 +04:00
|
|
|
size = lduw_be_phys(cs->as, vpa + 0x4);
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
|
|
|
|
if (size < VPA_MIN_SIZE) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* VPA is not allowed to cross a page boundary */
|
|
|
|
if ((vpa / 4096) != ((vpa + size - 1) / 4096)) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
env->vpa_addr = vpa;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
|
2013-12-17 08:05:40 +04:00
|
|
|
tmp = ldub_phys(cs->as, env->vpa_addr + VPA_SHARED_PROC_OFFSET);
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
tmp |= VPA_SHARED_PROC_VAL;
|
2013-12-17 09:29:06 +04:00
|
|
|
stb_phys(cs->as, env->vpa_addr + VPA_SHARED_PROC_OFFSET, tmp);
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-03-14 04:38:23 +04:00
|
|
|
static target_ulong deregister_vpa(CPUPPCState *env, target_ulong vpa)
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
{
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
if (env->slb_shadow_addr) {
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
return H_RESOURCE;
|
|
|
|
}
|
|
|
|
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
if (env->dtl_addr) {
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
return H_RESOURCE;
|
|
|
|
}
|
|
|
|
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
env->vpa_addr = 0;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-03-14 04:38:23 +04:00
|
|
|
static target_ulong register_slb_shadow(CPUPPCState *env, target_ulong addr)
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
{
|
2014-03-09 22:29:41 +04:00
|
|
|
CPUState *cs = CPU(ppc_env_get_cpu(env));
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
uint32_t size;
|
|
|
|
|
|
|
|
if (addr == 0) {
|
|
|
|
hcall_dprintf("Can't cope with SLB shadow at logical 0\n");
|
|
|
|
return H_HARDWARE;
|
|
|
|
}
|
|
|
|
|
2013-11-15 17:46:38 +04:00
|
|
|
size = ldl_be_phys(cs->as, addr + 0x4);
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
if (size < 0x8) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((addr / 4096) != ((addr + size - 1) / 4096)) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
if (!env->vpa_addr) {
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
return H_RESOURCE;
|
|
|
|
}
|
|
|
|
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
env->slb_shadow_addr = addr;
|
|
|
|
env->slb_shadow_size = size;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-03-14 04:38:23 +04:00
|
|
|
static target_ulong deregister_slb_shadow(CPUPPCState *env, target_ulong addr)
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
{
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
env->slb_shadow_addr = 0;
|
|
|
|
env->slb_shadow_size = 0;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-03-14 04:38:23 +04:00
|
|
|
static target_ulong register_dtl(CPUPPCState *env, target_ulong addr)
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
{
|
2014-03-09 22:29:41 +04:00
|
|
|
CPUState *cs = CPU(ppc_env_get_cpu(env));
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
uint32_t size;
|
|
|
|
|
|
|
|
if (addr == 0) {
|
|
|
|
hcall_dprintf("Can't cope with DTL at logical 0\n");
|
|
|
|
return H_HARDWARE;
|
|
|
|
}
|
|
|
|
|
2013-11-15 17:46:38 +04:00
|
|
|
size = ldl_be_phys(cs->as, addr + 0x4);
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
|
|
|
|
if (size < 48) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
if (!env->vpa_addr) {
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
return H_RESOURCE;
|
|
|
|
}
|
|
|
|
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
env->dtl_addr = addr;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
env->dtl_size = size;
|
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-04-23 11:27:56 +04:00
|
|
|
static target_ulong deregister_dtl(CPUPPCState *env, target_ulong addr)
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
{
|
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-08 22:17:38 +04:00
|
|
|
env->dtl_addr = 0;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
env->dtl_size = 0;
|
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_register_vpa(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
|
|
|
target_ulong flags = args[0];
|
|
|
|
target_ulong procno = args[1];
|
|
|
|
target_ulong vpa = args[2];
|
|
|
|
target_ulong ret = H_PARAMETER;
|
2012-03-14 04:38:23 +04:00
|
|
|
CPUPPCState *tenv;
|
2014-02-01 18:45:52 +04:00
|
|
|
PowerPCCPU *tcpu;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
|
2014-02-01 18:45:52 +04:00
|
|
|
tcpu = ppc_get_vcpu_by_dt_id(procno);
|
2013-02-15 19:43:08 +04:00
|
|
|
if (!tcpu) {
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
2014-02-01 18:45:52 +04:00
|
|
|
tenv = &tcpu->env;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
|
|
|
|
switch (flags) {
|
|
|
|
case FLAGS_REGISTER_VPA:
|
|
|
|
ret = register_vpa(tenv, vpa);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FLAGS_DEREGISTER_VPA:
|
|
|
|
ret = deregister_vpa(tenv, vpa);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FLAGS_REGISTER_SLBSHADOW:
|
|
|
|
ret = register_slb_shadow(tenv, vpa);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FLAGS_DEREGISTER_SLBSHADOW:
|
|
|
|
ret = deregister_slb_shadow(tenv, vpa);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FLAGS_REGISTER_DTL:
|
|
|
|
ret = register_dtl(tenv, vpa);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FLAGS_DEREGISTER_DTL:
|
|
|
|
ret = deregister_dtl(tenv, vpa);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_cede(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2012-05-03 08:23:01 +04:00
|
|
|
CPUPPCState *env = &cpu->env;
|
2012-12-17 11:02:44 +04:00
|
|
|
CPUState *cs = CPU(cpu);
|
2012-05-03 08:23:01 +04:00
|
|
|
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
env->msr |= (1ULL << MSR_EE);
|
|
|
|
hreg_compute_hflags(env);
|
2012-12-17 11:02:44 +04:00
|
|
|
if (!cpu_has_work(cs)) {
|
2013-01-17 21:51:17 +04:00
|
|
|
cs->halted = 1;
|
2013-08-26 10:31:06 +04:00
|
|
|
cs->exception_index = EXCP_HLT;
|
2012-12-17 11:02:44 +04:00
|
|
|
cs->exit_request = 1;
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
}
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_rtas(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-04-01 08:15:23 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
|
|
|
target_ulong rtas_r3 = args[0];
|
2013-09-27 12:10:18 +04:00
|
|
|
uint32_t token = rtas_ld(rtas_r3, 0);
|
|
|
|
uint32_t nargs = rtas_ld(rtas_r3, 1);
|
|
|
|
uint32_t nret = rtas_ld(rtas_r3, 2);
|
2011-04-01 08:15:23 +04:00
|
|
|
|
2013-06-20 00:40:30 +04:00
|
|
|
return spapr_rtas_call(cpu, spapr, token, nargs, rtas_r3 + 12,
|
2011-04-01 08:15:23 +04:00
|
|
|
nret, rtas_r3 + 12 + 4*nargs);
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_logical_load(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-08-10 18:44:20 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2013-11-15 17:46:38 +04:00
|
|
|
CPUState *cs = CPU(cpu);
|
2011-08-10 18:44:20 +04:00
|
|
|
target_ulong size = args[0];
|
|
|
|
target_ulong addr = args[1];
|
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
2013-12-17 08:05:40 +04:00
|
|
|
args[0] = ldub_phys(cs->as, addr);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
case 2:
|
2013-12-17 08:33:56 +04:00
|
|
|
args[0] = lduw_phys(cs->as, addr);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
case 4:
|
2013-11-15 17:46:38 +04:00
|
|
|
args[0] = ldl_phys(cs->as, addr);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
case 8:
|
2013-12-17 08:05:40 +04:00
|
|
|
args[0] = ldq_phys(cs->as, addr);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_logical_store(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-08-10 18:44:20 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2013-11-28 03:11:44 +04:00
|
|
|
CPUState *cs = CPU(cpu);
|
|
|
|
|
2011-08-10 18:44:20 +04:00
|
|
|
target_ulong size = args[0];
|
|
|
|
target_ulong addr = args[1];
|
|
|
|
target_ulong val = args[2];
|
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
2013-12-17 09:29:06 +04:00
|
|
|
stb_phys(cs->as, addr, val);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
case 2:
|
2013-12-17 09:22:06 +04:00
|
|
|
stw_phys(cs->as, addr, val);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
case 4:
|
2013-12-17 09:07:29 +04:00
|
|
|
stl_phys(cs->as, addr, val);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
case 8:
|
2013-11-28 03:11:44 +04:00
|
|
|
stq_phys(cs->as, addr, val);
|
2011-08-10 18:44:20 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_logical_memop(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2012-06-19 00:21:37 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
2013-11-15 17:46:38 +04:00
|
|
|
CPUState *cs = CPU(cpu);
|
|
|
|
|
2012-06-19 00:21:37 +04:00
|
|
|
target_ulong dst = args[0]; /* Destination address */
|
|
|
|
target_ulong src = args[1]; /* Source address */
|
|
|
|
target_ulong esize = args[2]; /* Element size (0=1,1=2,2=4,3=8) */
|
|
|
|
target_ulong count = args[3]; /* Element count */
|
|
|
|
target_ulong op = args[4]; /* 0 = copy, 1 = invert */
|
|
|
|
uint64_t tmp;
|
|
|
|
unsigned int mask = (1 << esize) - 1;
|
|
|
|
int step = 1 << esize;
|
|
|
|
|
|
|
|
if (count > 0x80000000) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((dst & mask) || (src & mask) || (op > 1)) {
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dst >= src && dst < (src + (count << esize))) {
|
|
|
|
dst = dst + ((count - 1) << esize);
|
|
|
|
src = src + ((count - 1) << esize);
|
|
|
|
step = -step;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (count--) {
|
|
|
|
switch (esize) {
|
|
|
|
case 0:
|
2013-12-17 08:05:40 +04:00
|
|
|
tmp = ldub_phys(cs->as, src);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
case 1:
|
2013-12-17 08:33:56 +04:00
|
|
|
tmp = lduw_phys(cs->as, src);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
case 2:
|
2013-11-15 17:46:38 +04:00
|
|
|
tmp = ldl_phys(cs->as, src);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
case 3:
|
2013-12-17 08:05:40 +04:00
|
|
|
tmp = ldq_phys(cs->as, src);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return H_PARAMETER;
|
|
|
|
}
|
|
|
|
if (op == 1) {
|
|
|
|
tmp = ~tmp;
|
|
|
|
}
|
|
|
|
switch (esize) {
|
|
|
|
case 0:
|
2013-12-17 09:29:06 +04:00
|
|
|
stb_phys(cs->as, dst, tmp);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
case 1:
|
2013-12-17 09:22:06 +04:00
|
|
|
stw_phys(cs->as, dst, tmp);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
case 2:
|
2013-12-17 09:07:29 +04:00
|
|
|
stl_phys(cs->as, dst, tmp);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
case 3:
|
2013-11-28 03:11:44 +04:00
|
|
|
stq_phys(cs->as, dst, tmp);
|
2012-06-19 00:21:37 +04:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
dst = dst + step;
|
|
|
|
src = src + step;
|
|
|
|
}
|
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_logical_icbi(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-08-10 18:44:20 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
|
|
|
/* Nothing to do on emulation, KVM will trap this in the kernel */
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2012-05-03 08:23:01 +04:00
|
|
|
static target_ulong h_logical_dcbf(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
2011-08-10 18:44:20 +04:00
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
|
|
|
/* Nothing to do on emulation, KVM will trap this in the kernel */
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2014-07-08 19:02:26 +04:00
|
|
|
static target_ulong h_set_mode_resource_le(PowerPCCPU *cpu,
|
|
|
|
target_ulong mflags,
|
|
|
|
target_ulong value1,
|
|
|
|
target_ulong value2)
|
2013-08-19 15:04:20 +04:00
|
|
|
{
|
|
|
|
CPUState *cs;
|
|
|
|
|
2014-06-04 16:51:04 +04:00
|
|
|
if (value1) {
|
|
|
|
return H_P3;
|
|
|
|
}
|
|
|
|
if (value2) {
|
|
|
|
return H_P4;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (mflags) {
|
|
|
|
case H_SET_MODE_ENDIAN_BIG:
|
|
|
|
CPU_FOREACH(cs) {
|
|
|
|
set_spr(cs, SPR_LPCR, 0, LPCR_ILE);
|
2013-08-19 15:04:20 +04:00
|
|
|
}
|
2015-02-10 07:36:16 +03:00
|
|
|
spapr_pci_switch_vga(true);
|
2014-06-04 16:51:04 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
|
|
|
|
case H_SET_MODE_ENDIAN_LITTLE:
|
|
|
|
CPU_FOREACH(cs) {
|
|
|
|
set_spr(cs, SPR_LPCR, LPCR_ILE, LPCR_ILE);
|
2013-08-19 15:04:20 +04:00
|
|
|
}
|
2015-02-10 07:36:16 +03:00
|
|
|
spapr_pci_switch_vga(false);
|
2014-06-04 16:51:04 +04:00
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
2013-08-19 15:04:20 +04:00
|
|
|
|
2014-06-04 16:51:04 +04:00
|
|
|
return H_UNSUPPORTED_FLAG;
|
|
|
|
}
|
2013-08-19 15:04:20 +04:00
|
|
|
|
2014-07-08 19:02:26 +04:00
|
|
|
static target_ulong h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu,
|
|
|
|
target_ulong mflags,
|
|
|
|
target_ulong value1,
|
|
|
|
target_ulong value2)
|
2014-06-04 16:51:05 +04:00
|
|
|
{
|
|
|
|
CPUState *cs;
|
|
|
|
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
|
|
|
|
target_ulong prefix;
|
|
|
|
|
|
|
|
if (!(pcc->insns_flags2 & PPC2_ISA207S)) {
|
|
|
|
return H_P2;
|
|
|
|
}
|
|
|
|
if (value1) {
|
|
|
|
return H_P3;
|
|
|
|
}
|
|
|
|
if (value2) {
|
|
|
|
return H_P4;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (mflags) {
|
|
|
|
case H_SET_MODE_ADDR_TRANS_NONE:
|
|
|
|
prefix = 0;
|
|
|
|
break;
|
|
|
|
case H_SET_MODE_ADDR_TRANS_0001_8000:
|
|
|
|
prefix = 0x18000;
|
|
|
|
break;
|
|
|
|
case H_SET_MODE_ADDR_TRANS_C000_0000_0000_4000:
|
2014-07-08 18:53:42 +04:00
|
|
|
prefix = 0xC000000000004000ULL;
|
2014-06-04 16:51:05 +04:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return H_UNSUPPORTED_FLAG;
|
|
|
|
}
|
|
|
|
|
|
|
|
CPU_FOREACH(cs) {
|
|
|
|
CPUPPCState *env = &POWERPC_CPU(cpu)->env;
|
|
|
|
|
|
|
|
set_spr(cs, SPR_LPCR, mflags << LPCR_AIL_SHIFT, LPCR_AIL);
|
|
|
|
env->excp_prefix = prefix;
|
|
|
|
}
|
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2014-06-04 16:51:04 +04:00
|
|
|
static target_ulong h_set_mode(PowerPCCPU *cpu, sPAPREnvironment *spapr,
|
|
|
|
target_ulong opcode, target_ulong *args)
|
|
|
|
{
|
|
|
|
target_ulong resource = args[1];
|
|
|
|
target_ulong ret = H_P2;
|
|
|
|
|
|
|
|
switch (resource) {
|
|
|
|
case H_SET_MODE_RESOURCE_LE:
|
2014-07-08 19:02:26 +04:00
|
|
|
ret = h_set_mode_resource_le(cpu, args[0], args[2], args[3]);
|
2014-06-04 16:51:04 +04:00
|
|
|
break;
|
2014-06-04 16:51:05 +04:00
|
|
|
case H_SET_MODE_RESOURCE_ADDR_TRANS_MODE:
|
2014-07-08 19:02:26 +04:00
|
|
|
ret = h_set_mode_resource_addr_trans_mode(cpu, args[0],
|
|
|
|
args[2], args[3]);
|
2014-06-04 16:51:05 +04:00
|
|
|
break;
|
2013-08-19 15:04:20 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
spapr: Implement processor compatibility in ibm, client-architecture-support
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.
>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.
This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-05-23 06:26:57 +04:00
|
|
|
typedef struct {
|
|
|
|
PowerPCCPU *cpu;
|
|
|
|
uint32_t cpu_version;
|
|
|
|
int ret;
|
|
|
|
} SetCompatState;
|
|
|
|
|
|
|
|
static void do_set_compat(void *arg)
|
|
|
|
{
|
|
|
|
SetCompatState *s = arg;
|
|
|
|
|
|
|
|
cpu_synchronize_state(CPU(s->cpu));
|
|
|
|
s->ret = ppc_set_compat(s->cpu, s->cpu_version);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define get_compat_level(cpuver) ( \
|
|
|
|
((cpuver) == CPU_POWERPC_LOGICAL_2_05) ? 2050 : \
|
|
|
|
((cpuver) == CPU_POWERPC_LOGICAL_2_06) ? 2060 : \
|
|
|
|
((cpuver) == CPU_POWERPC_LOGICAL_2_06_PLUS) ? 2061 : \
|
|
|
|
((cpuver) == CPU_POWERPC_LOGICAL_2_07) ? 2070 : 0)
|
|
|
|
|
2014-05-23 06:26:54 +04:00
|
|
|
static target_ulong h_client_architecture_support(PowerPCCPU *cpu_,
|
|
|
|
sPAPREnvironment *spapr,
|
|
|
|
target_ulong opcode,
|
|
|
|
target_ulong *args)
|
|
|
|
{
|
|
|
|
target_ulong list = args[0];
|
spapr: Implement processor compatibility in ibm, client-architecture-support
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.
>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.
This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-05-23 06:26:57 +04:00
|
|
|
PowerPCCPUClass *pcc_ = POWERPC_CPU_GET_CLASS(cpu_);
|
|
|
|
CPUState *cs;
|
|
|
|
bool cpu_match = false;
|
|
|
|
unsigned old_cpu_version = cpu_->cpu_version;
|
|
|
|
unsigned compat_lvl = 0, cpu_version = 0;
|
|
|
|
unsigned max_lvl = get_compat_level(cpu_->max_compat);
|
|
|
|
int counter;
|
|
|
|
|
|
|
|
/* Parse PVR list */
|
|
|
|
for (counter = 0; counter < 512; ++counter) {
|
|
|
|
uint32_t pvr, pvr_mask;
|
|
|
|
|
|
|
|
pvr_mask = rtas_ld(list, 0);
|
|
|
|
list += 4;
|
|
|
|
pvr = rtas_ld(list, 0);
|
|
|
|
list += 4;
|
|
|
|
|
|
|
|
trace_spapr_cas_pvr_try(pvr);
|
|
|
|
if (!max_lvl &&
|
|
|
|
((cpu_->env.spr[SPR_PVR] & pvr_mask) == (pvr & pvr_mask))) {
|
|
|
|
cpu_match = true;
|
|
|
|
cpu_version = 0;
|
|
|
|
} else if (pvr == cpu_->cpu_version) {
|
|
|
|
cpu_match = true;
|
|
|
|
cpu_version = cpu_->cpu_version;
|
|
|
|
} else if (!cpu_match) {
|
|
|
|
/* If it is a logical PVR, try to determine the highest level */
|
|
|
|
unsigned lvl = get_compat_level(pvr);
|
|
|
|
if (lvl) {
|
|
|
|
bool is205 = (pcc_->pcr_mask & PCR_COMPAT_2_05) &&
|
|
|
|
(lvl == get_compat_level(CPU_POWERPC_LOGICAL_2_05));
|
|
|
|
bool is206 = (pcc_->pcr_mask & PCR_COMPAT_2_06) &&
|
|
|
|
((lvl == get_compat_level(CPU_POWERPC_LOGICAL_2_06)) ||
|
|
|
|
(lvl == get_compat_level(CPU_POWERPC_LOGICAL_2_06_PLUS)));
|
|
|
|
|
|
|
|
if (is205 || is206) {
|
|
|
|
if (!max_lvl) {
|
|
|
|
/* User did not set the level, choose the highest */
|
|
|
|
if (compat_lvl <= lvl) {
|
|
|
|
compat_lvl = lvl;
|
|
|
|
cpu_version = pvr;
|
|
|
|
}
|
|
|
|
} else if (max_lvl >= lvl) {
|
|
|
|
/* User chose the level, don't set higher than this */
|
|
|
|
compat_lvl = lvl;
|
|
|
|
cpu_version = pvr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Terminator record */
|
|
|
|
if (~pvr_mask & pvr) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* For the future use: here @list points to the first capability */
|
|
|
|
|
|
|
|
/* Parsing finished */
|
|
|
|
trace_spapr_cas_pvr(cpu_->cpu_version, cpu_match,
|
|
|
|
cpu_version, pcc_->pcr_mask);
|
|
|
|
|
|
|
|
/* Update CPUs */
|
|
|
|
if (old_cpu_version != cpu_version) {
|
|
|
|
CPU_FOREACH(cs) {
|
|
|
|
SetCompatState s = {
|
|
|
|
.cpu = POWERPC_CPU(cs),
|
|
|
|
.cpu_version = cpu_version,
|
|
|
|
.ret = 0
|
|
|
|
};
|
|
|
|
|
|
|
|
run_on_cpu(cs, do_set_compat, &s);
|
|
|
|
|
|
|
|
if (s.ret < 0) {
|
|
|
|
fprintf(stderr, "Unable to set compatibility mode\n");
|
|
|
|
return H_HARDWARE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!cpu_version) {
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
2014-05-23 06:26:54 +04:00
|
|
|
|
|
|
|
if (!list) {
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (spapr_h_cas_compose_response(args[1], args[2])) {
|
|
|
|
qemu_system_reset_request();
|
|
|
|
}
|
|
|
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2011-05-10 10:06:21 +04:00
|
|
|
static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1];
|
|
|
|
static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE + 1];
|
2011-04-01 08:15:20 +04:00
|
|
|
|
|
|
|
void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn)
|
|
|
|
{
|
2011-04-01 08:15:23 +04:00
|
|
|
spapr_hcall_fn *slot;
|
|
|
|
|
|
|
|
if (opcode <= MAX_HCALL_OPCODE) {
|
|
|
|
assert((opcode & 0x3) == 0);
|
2011-04-01 08:15:20 +04:00
|
|
|
|
2011-04-01 08:15:23 +04:00
|
|
|
slot = &papr_hypercall_table[opcode / 4];
|
|
|
|
} else {
|
|
|
|
assert((opcode >= KVMPPC_HCALL_BASE) && (opcode <= KVMPPC_HCALL_MAX));
|
2011-04-01 08:15:20 +04:00
|
|
|
|
2011-04-01 08:15:23 +04:00
|
|
|
slot = &kvmppc_hypercall_table[opcode - KVMPPC_HCALL_BASE];
|
|
|
|
}
|
2011-04-01 08:15:20 +04:00
|
|
|
|
2012-10-08 22:17:36 +04:00
|
|
|
assert(!(*slot));
|
2011-04-01 08:15:23 +04:00
|
|
|
*slot = fn;
|
2011-04-01 08:15:20 +04:00
|
|
|
}
|
|
|
|
|
2012-05-03 08:13:14 +04:00
|
|
|
target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode,
|
2011-04-01 08:15:20 +04:00
|
|
|
target_ulong *args)
|
|
|
|
{
|
|
|
|
if ((opcode <= MAX_HCALL_OPCODE)
|
|
|
|
&& ((opcode & 0x3) == 0)) {
|
2011-04-01 08:15:23 +04:00
|
|
|
spapr_hcall_fn fn = papr_hypercall_table[opcode / 4];
|
|
|
|
|
|
|
|
if (fn) {
|
2012-05-03 08:23:01 +04:00
|
|
|
return fn(cpu, spapr, opcode, args);
|
2011-04-01 08:15:23 +04:00
|
|
|
}
|
|
|
|
} else if ((opcode >= KVMPPC_HCALL_BASE) &&
|
|
|
|
(opcode <= KVMPPC_HCALL_MAX)) {
|
|
|
|
spapr_hcall_fn fn = kvmppc_hypercall_table[opcode - KVMPPC_HCALL_BASE];
|
2011-04-01 08:15:20 +04:00
|
|
|
|
|
|
|
if (fn) {
|
2012-05-03 08:23:01 +04:00
|
|
|
return fn(cpu, spapr, opcode, args);
|
2011-04-01 08:15:20 +04:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
hcall_dprintf("Unimplemented hcall 0x" TARGET_FMT_lx "\n", opcode);
|
|
|
|
return H_FUNCTION;
|
|
|
|
}
|
2011-04-01 08:15:22 +04:00
|
|
|
|
2012-02-09 18:20:55 +04:00
|
|
|
static void hypercall_register_types(void)
|
2011-04-01 08:15:22 +04:00
|
|
|
{
|
|
|
|
/* hcall-pft */
|
|
|
|
spapr_register_hypercall(H_ENTER, h_enter);
|
|
|
|
spapr_register_hypercall(H_REMOVE, h_remove);
|
|
|
|
spapr_register_hypercall(H_PROTECT, h_protect);
|
2013-02-18 09:00:32 +04:00
|
|
|
spapr_register_hypercall(H_READ, h_read);
|
2011-04-01 08:15:23 +04:00
|
|
|
|
2011-08-31 19:50:50 +04:00
|
|
|
/* hcall-bulk */
|
|
|
|
spapr_register_hypercall(H_BULK_REMOVE, h_bulk_remove);
|
|
|
|
|
2011-04-01 08:15:24 +04:00
|
|
|
/* hcall-dabr */
|
|
|
|
spapr_register_hypercall(H_SET_DABR, h_set_dabr);
|
|
|
|
|
Implement PAPR VPA functions for pSeries shared processor partitions
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 08:15:33 +04:00
|
|
|
/* hcall-splpar */
|
|
|
|
spapr_register_hypercall(H_REGISTER_VPA, h_register_vpa);
|
|
|
|
spapr_register_hypercall(H_CEDE, h_cede);
|
|
|
|
|
2011-08-10 18:44:20 +04:00
|
|
|
/* "debugger" hcalls (also used by SLOF). Note: We do -not- differenciate
|
|
|
|
* here between the "CI" and the "CACHE" variants, they will use whatever
|
|
|
|
* mapping attributes qemu is using. When using KVM, the kernel will
|
|
|
|
* enforce the attributes more strongly
|
|
|
|
*/
|
|
|
|
spapr_register_hypercall(H_LOGICAL_CI_LOAD, h_logical_load);
|
|
|
|
spapr_register_hypercall(H_LOGICAL_CI_STORE, h_logical_store);
|
|
|
|
spapr_register_hypercall(H_LOGICAL_CACHE_LOAD, h_logical_load);
|
|
|
|
spapr_register_hypercall(H_LOGICAL_CACHE_STORE, h_logical_store);
|
|
|
|
spapr_register_hypercall(H_LOGICAL_ICBI, h_logical_icbi);
|
|
|
|
spapr_register_hypercall(H_LOGICAL_DCBF, h_logical_dcbf);
|
2012-06-19 00:21:37 +04:00
|
|
|
spapr_register_hypercall(KVMPPC_H_LOGICAL_MEMOP, h_logical_memop);
|
2011-08-10 18:44:20 +04:00
|
|
|
|
2011-04-01 08:15:23 +04:00
|
|
|
/* qemu/KVM-PPC specific hcalls */
|
|
|
|
spapr_register_hypercall(KVMPPC_H_RTAS, h_rtas);
|
2013-08-19 15:04:20 +04:00
|
|
|
|
|
|
|
spapr_register_hypercall(H_SET_MODE, h_set_mode);
|
2014-05-23 06:26:54 +04:00
|
|
|
|
|
|
|
/* ibm,client-architecture-support support */
|
|
|
|
spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support);
|
2011-04-01 08:15:22 +04:00
|
|
|
}
|
2012-02-09 18:20:55 +04:00
|
|
|
|
|
|
|
type_init(hypercall_register_types)
|