mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0fef572e43
qemu/tests/qemu-iotests/150.out.raw

13 lines
284 B
Plaintext
Raw Normal View History

iotests: Test qemu-img convert -S 0 behavior Passing -S 0 to qemu-img convert should result in all source data being copied to the output, even if that source data is known to be 0. The output image should therefore have exactly the same size on disk as an image which we explicitly filled with data. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-25 01:34:00 +03:00
QA output created by 150
iotests: Make 150 use qemu-img map instead of du The actual on-disk size of a file does not only depend on factors qemu can control. Thus, we should not depend on this to determine whether a file has indeed been fully allocated. Instead, use qemu-img map and hope that if an area is referenced, it is indeed allocated, too. Also, limit the supported image formats to raw and qcow2 because the actual qemu-img map output may depend on the image format. Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-29 19:24:17 +03:00
=== Mapping sparse conversion ===
iotests: Test qemu-img convert -S 0 behavior Passing -S 0 to qemu-img convert should result in all source data being copied to the output, even if that source data is known to be 0. The output image should therefore have exactly the same size on disk as an image which we explicitly filled with data. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-25 01:34:00 +03:00
iotests: Make 150 use qemu-img map instead of du The actual on-disk size of a file does not only depend on factors qemu can control. Thus, we should not depend on this to determine whether a file has indeed been fully allocated. Instead, use qemu-img map and hope that if an area is referenced, it is indeed allocated, too. Also, limit the supported image formats to raw and qcow2 because the actual qemu-img map output may depend on the image format. Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-29 19:24:17 +03:00
Offset Length File
block: posix: Always allocate the first block When creating an image with preallocation "off" or "falloc", the first block of the image is typically not allocated. When using Gluster storage backed by XFS filesystem, reading this block using direct I/O succeeds regardless of request length, fooling alignment detection. In this case we fallback to a safe value (4096) instead of the optimal value (512), which may lead to unneeded data copying when aligning requests. Allocating the first block avoids the fallback. Since we allocate the first block even with preallocation=off, we no longer create images with zero disk size: $ ./qemu-img create -f raw test.raw 1g Formatting 'test.raw', fmt=raw size=1073741824 $ ls -lhs test.raw 4.0K -rw-r--r--. 1 nsoffer nsoffer 1.0G Aug 16 23:48 test.raw And converting the image requires additional cluster: $ ./qemu-img measure -f raw -O qcow2 test.raw required size: 458752 fully allocated size: 1074135040 When using format like vmdk with multiple files per image, we allocate one block per file: $ ./qemu-img create -f vmdk -o subformat=twoGbMaxExtentFlat test.vmdk 4g Formatting 'test.vmdk', fmt=vmdk size=4294967296 compat6=off hwversion=undefined subformat=twoGbMaxExtentFlat $ ls -lhs test*.vmdk 4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f001.vmdk 4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f002.vmdk 4.0K -rw-r--r--. 1 nsoffer nsoffer 353 Aug 27 03:23 test.vmdk I did quick performance test for copying disks with qemu-img convert to new raw target image to Gluster storage with sector size of 512 bytes: for i in $(seq 10); do rm -f dst.raw sleep 10 time ./qemu-img convert -f raw -O raw -t none -T none src.raw dst.raw done Here is a table comparing the total time spent: Type Before(s) After(s) Diff(%) --------------------------------------- real 530.028 469.123 -11.4 user 17.204 10.768 -37.4 sys 17.881 7.011 -60.7 We can see very clear improvement in CPU usage. Signed-off-by: Nir Soffer <nsoffer@redhat.com> Message-id: 20190827010528.8818-2-nsoffer@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-27 04:05:27 +03:00
0 0x1000 TEST_DIR/t.IMGFMT
iotests: Test qemu-img convert -S 0 behavior Passing -S 0 to qemu-img convert should result in all source data being copied to the output, even if that source data is known to be 0. The output image should therefore have exactly the same size on disk as an image which we explicitly filled with data. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-25 01:34:00 +03:00
iotests: Make 150 use qemu-img map instead of du The actual on-disk size of a file does not only depend on factors qemu can control. Thus, we should not depend on this to determine whether a file has indeed been fully allocated. Instead, use qemu-img map and hope that if an area is referenced, it is indeed allocated, too. Also, limit the supported image formats to raw and qcow2 because the actual qemu-img map output may depend on the image format. Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-29 19:24:17 +03:00
=== Mapping non-sparse conversion ===
iotests: Test qemu-img convert -S 0 behavior Passing -S 0 to qemu-img convert should result in all source data being copied to the output, even if that source data is known to be 0. The output image should therefore have exactly the same size on disk as an image which we explicitly filled with data. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-25 01:34:00 +03:00
iotests: Make 150 use qemu-img map instead of du The actual on-disk size of a file does not only depend on factors qemu can control. Thus, we should not depend on this to determine whether a file has indeed been fully allocated. Instead, use qemu-img map and hope that if an area is referenced, it is indeed allocated, too. Also, limit the supported image formats to raw and qcow2 because the actual qemu-img map output may depend on the image format. Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-29 19:24:17 +03:00
Offset Length File
0 0x100000 TEST_DIR/t.IMGFMT
iotests: Test qemu-img convert -S 0 behavior Passing -S 0 to qemu-img convert should result in all source data being copied to the output, even if that source data is known to be 0. The output image should therefore have exactly the same size on disk as an image which we explicitly filled with data. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-25 01:34:00 +03:00
*** done
Reference in New Issue Copy Permalink