mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0fd604b02a
qemu/hw/cxl/meson.build

14 lines
438 B
Meson
Raw Normal View History

hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) A CXL 2.0 component is any entity in the CXL topology. All components have a analogous function in PCIe. Except for the CXL host bridge, all have a PCIe config space that is accessible via the common PCIe mechanisms. CXL components are enumerated via DVSEC fields in the extended PCIe header space. CXL components will minimally implement some subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL 2.0 specification. Two headers and a utility library are introduced to support the minimum functionality needed to enumerate components. The cxl_pci header manages bits associated with PCI, specifically the DVSEC and related fields. The cxl_component.h variant has data structures and APIs that are useful for drivers implementing any of the CXL 2.0 components. The library takes care of making use of the DVSEC bits and the CXL.[mem|cache] registers. Per spec, the registers are little endian. None of the mechanisms required to enumerate a CXL capable hostbridge are introduced at this point. Note that the CXL.mem and CXL.cache registers used are always 4B wide. It's possible in the future that this constraint will not hold. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Message-Id: <20220429144110.25167-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:27 +03:00
softmmu_ss.add(when: 'CONFIG_CXL',
if_true: files(
'cxl-component-utils.c',
hw/cxl/device: Implement the CAP array (8.2.8.1-2) This implements all device MMIO up to the first capability. That includes the CXL Device Capabilities Array Register, as well as all of the CXL Device Capability Header Registers. The latter are filled in as they are implemented in the following patches. Endianness and alignment are managed by softmmu memory core. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:30 +03:00
'cxl-device-utils.c',
hw/cxl/device: Implement basic mailbox (8.2.8.4) This is the beginning of implementing mailbox support for CXL 2.0 devices. The implementation recognizes when the doorbell is rung, handles the command/payload, clears the doorbell while returning error codes and data. Generally the mailbox mechanism is designed to permit communication between the host OS and the firmware running on the device. For our purposes, we emulate both the firmware, implemented primarily in cxl-mailbox-utils.c, and the hardware. No commands are implemented yet. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:31 +03:00
'cxl-mailbox-utils.c',
hw/cxl/host: Add support for CXL Fixed Memory Windows. The concept of these is introduced in [1] in terms of the description the CEDT ACPI table. The principal is more general. Unlike once traffic hits the CXL root bridges, the host system memory address routing is implementation defined and effectively static once observable by standard / generic system software. Each CXL Fixed Memory Windows (CFMW) is a region of PA space which has fixed system dependent routing configured so that accesses can be routed to the CXL devices below a set of target root bridges. The accesses may be interleaved across multiple root bridges. For QEMU we could have fully specified these regions in terms of a base PA + size, but as the absolute address does not matter it is simpler to let individual platforms place the memory regions. ExampleS: -cxl-fixed-memory-window targets.0=cxl.0,size=128G -cxl-fixed-memory-window targets.0=cxl.1,size=128G -cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k Specifies * 2x 128G regions not interleaved across root bridges, one for each of the root bridges with ids cxl.0 and cxl.1 * 256G region interleaved across root bridges with ids cxl.0 and cxl.1 with a 2k interleave granularity. When system software enumerates the devices below a given root bridge it can then decide which CFMW to use. If non interleave is desired (or possible) it can use the appropriate CFMW for the root bridge in question. If there are suitable devices to interleave across the two root bridges then it may use the 3rd CFMS. A number of other designs were considered but the following constraints made it hard to adapt existing QEMU approaches to this particular problem. 1) The size must be known before a specific architecture / board brings up it's PA memory map. We need to set up an appropriate region. 2) Using links to the host bridges provides a clean command line interface but these links cannot be established until command line devices have been added. Hence the two step process used here of first establishing the size, interleave-ways and granularity + caching the ids of the host bridges and then, once available finding the actual host bridges so they can be used later to support interleave decoding. [1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications) Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
'cxl-host.c',
hw/cxl/cdat: CXL CDAT Data Object Exchange implementation The Data Object Exchange implementation of CXL Coherent Device Attribute Table (CDAT). This implementation is referring to "Coherent Device Attribute Table Specification, Rev. 1.03, July. 2022" and "Compute Express Link Specification, Rev. 3.0, July. 2022" This patch adds core support that will be shared by both end-points and switch port emulation. Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20221014151045.24781-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-14 18:10:43 +03:00
'cxl-cdat.c',
hw/cxl/host: Add support for CXL Fixed Memory Windows. The concept of these is introduced in [1] in terms of the description the CEDT ACPI table. The principal is more general. Unlike once traffic hits the CXL root bridges, the host system memory address routing is implementation defined and effectively static once observable by standard / generic system software. Each CXL Fixed Memory Windows (CFMW) is a region of PA space which has fixed system dependent routing configured so that accesses can be routed to the CXL devices below a set of target root bridges. The accesses may be interleaved across multiple root bridges. For QEMU we could have fully specified these regions in terms of a base PA + size, but as the absolute address does not matter it is simpler to let individual platforms place the memory regions. ExampleS: -cxl-fixed-memory-window targets.0=cxl.0,size=128G -cxl-fixed-memory-window targets.0=cxl.1,size=128G -cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k Specifies * 2x 128G regions not interleaved across root bridges, one for each of the root bridges with ids cxl.0 and cxl.1 * 256G region interleaved across root bridges with ids cxl.0 and cxl.1 with a 2k interleave granularity. When system software enumerates the devices below a given root bridge it can then decide which CFMW to use. If non interleave is desired (or possible) it can use the appropriate CFMW for the root bridge in question. If there are suitable devices to interleave across the two root bridges then it may use the 3rd CFMS. A number of other designs were considered but the following constraints made it hard to adapt existing QEMU approaches to this particular problem. 1) The size must be known before a specific architecture / board brings up it's PA memory map. We need to set up an appropriate region. 2) Using links to the host bridges provides a clean command line interface but these links cannot be established until command line devices have been added. Hence the two step process used here of first establishing the size, interleave-ways and granularity + caching the ids of the host bridges and then, once available finding the actual host bridges so they can be used later to support interleave decoding. [1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications) Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
),
if_false: files(
'cxl-host-stubs.c',
hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) A CXL 2.0 component is any entity in the CXL topology. All components have a analogous function in PCIe. Except for the CXL host bridge, all have a PCIe config space that is accessible via the common PCIe mechanisms. CXL components are enumerated via DVSEC fields in the extended PCIe header space. CXL components will minimally implement some subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL 2.0 specification. Two headers and a utility library are introduced to support the minimum functionality needed to enumerate components. The cxl_pci header manages bits associated with PCI, specifically the DVSEC and related fields. The cxl_component.h variant has data structures and APIs that are useful for drivers implementing any of the CXL 2.0 components. The library takes care of making use of the DVSEC bits and the CXL.[mem|cache] registers. Per spec, the registers are little endian. None of the mechanisms required to enumerate a CXL capable hostbridge are introduced at this point. Note that the CXL.mem and CXL.cache registers used are always 4B wide. It's possible in the future that this constraint will not hold. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Message-Id: <20220429144110.25167-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:27 +03:00
))
hw/cxl/host: Add support for CXL Fixed Memory Windows. The concept of these is introduced in [1] in terms of the description the CEDT ACPI table. The principal is more general. Unlike once traffic hits the CXL root bridges, the host system memory address routing is implementation defined and effectively static once observable by standard / generic system software. Each CXL Fixed Memory Windows (CFMW) is a region of PA space which has fixed system dependent routing configured so that accesses can be routed to the CXL devices below a set of target root bridges. The accesses may be interleaved across multiple root bridges. For QEMU we could have fully specified these regions in terms of a base PA + size, but as the absolute address does not matter it is simpler to let individual platforms place the memory regions. ExampleS: -cxl-fixed-memory-window targets.0=cxl.0,size=128G -cxl-fixed-memory-window targets.0=cxl.1,size=128G -cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k Specifies * 2x 128G regions not interleaved across root bridges, one for each of the root bridges with ids cxl.0 and cxl.1 * 256G region interleaved across root bridges with ids cxl.0 and cxl.1 with a 2k interleave granularity. When system software enumerates the devices below a given root bridge it can then decide which CFMW to use. If non interleave is desired (or possible) it can use the appropriate CFMW for the root bridge in question. If there are suitable devices to interleave across the two root bridges then it may use the 3rd CFMS. A number of other designs were considered but the following constraints made it hard to adapt existing QEMU approaches to this particular problem. 1) The size must be known before a specific architecture / board brings up it's PA memory map. We need to set up an appropriate region. 2) Using links to the host bridges provides a clean command line interface but these links cannot be established until command line devices have been added. Hence the two step process used here of first establishing the size, interleave-ways and granularity + caching the ids of the host bridges and then, once available finding the actual host bridges so they can be used later to support interleave decoding. [1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications) Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('cxl-host-stubs.c'))
Reference in New Issue Copy Permalink