hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
/*
|
|
|
|
* CXL host parameter parsing routines
|
|
|
|
*
|
|
|
|
* Copyright (c) 2022 Huawei
|
|
|
|
* Modeled loosely on the NUMA options handling in hw/core/numa.c
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "qemu/osdep.h"
|
|
|
|
#include "qemu/units.h"
|
|
|
|
#include "qemu/bitmap.h"
|
|
|
|
#include "qemu/error-report.h"
|
|
|
|
#include "qapi/error.h"
|
|
|
|
#include "sysemu/qtest.h"
|
|
|
|
#include "hw/boards.h"
|
|
|
|
|
|
|
|
#include "qapi/qapi-visit-machine.h"
|
|
|
|
#include "hw/cxl/cxl.h"
|
2022-06-08 17:54:33 +03:00
|
|
|
#include "hw/cxl/cxl_host.h"
|
2022-04-29 17:40:58 +03:00
|
|
|
#include "hw/pci/pci_bus.h"
|
|
|
|
#include "hw/pci/pci_bridge.h"
|
|
|
|
#include "hw/pci/pci_host.h"
|
|
|
|
#include "hw/pci/pcie_port.h"
|
2022-06-08 17:54:37 +03:00
|
|
|
#include "hw/pci-bridge/pci_expander_bridge.h"
|
hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
|
2022-06-08 17:54:33 +03:00
|
|
|
static void cxl_fixed_memory_window_config(CXLState *cxl_state,
|
|
|
|
CXLFixedMemoryWindowOptions *object,
|
|
|
|
Error **errp)
|
hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
{
|
2022-08-08 15:20:50 +03:00
|
|
|
g_autofree CXLFixedWindow *fw = g_malloc0(sizeof(*fw));
|
hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
strList *target;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (target = object->targets; target; target = target->next) {
|
|
|
|
fw->num_targets++;
|
|
|
|
}
|
|
|
|
|
|
|
|
fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
|
|
|
|
if (*errp) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (object->size % (256 * MiB)) {
|
|
|
|
error_setg(errp,
|
|
|
|
"Size of a CXL fixed memory window must my a multiple of 256MiB");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
fw->size = object->size;
|
|
|
|
|
|
|
|
if (object->has_interleave_granularity) {
|
|
|
|
fw->enc_int_gran =
|
|
|
|
cxl_interleave_granularity_enc(object->interleave_granularity,
|
|
|
|
errp);
|
|
|
|
if (*errp) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* Default to 256 byte interleave */
|
|
|
|
fw->enc_int_gran = 0;
|
|
|
|
}
|
|
|
|
|
2023-09-04 16:28:03 +03:00
|
|
|
fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets));
|
|
|
|
for (i = 0, target = object->targets; target; i++, target = target->next) {
|
|
|
|
/* This link cannot be resolved yet, so stash the name for now */
|
|
|
|
fw->targets[i] = g_strdup(target->value);
|
|
|
|
}
|
|
|
|
|
2022-08-08 15:20:50 +03:00
|
|
|
cxl_state->fixed_windows = g_list_append(cxl_state->fixed_windows,
|
|
|
|
g_steal_pointer(&fw));
|
hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2022-06-08 17:54:35 +03:00
|
|
|
void cxl_fmws_link_targets(CXLState *cxl_state, Error **errp)
|
hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
{
|
2022-06-08 17:54:35 +03:00
|
|
|
if (cxl_state && cxl_state->fixed_windows) {
|
hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
GList *it;
|
|
|
|
|
2022-06-08 17:54:35 +03:00
|
|
|
for (it = cxl_state->fixed_windows; it; it = it->next) {
|
hw/cxl/host: Add support for CXL Fixed Memory Windows.
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:52 +03:00
|
|
|
CXLFixedWindow *fw = it->data;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < fw->num_targets; i++) {
|
|
|
|
Object *o;
|
|
|
|
bool ambig;
|
|
|
|
|
|
|
|
o = object_resolve_path_type(fw->targets[i],
|
|
|
|
TYPE_PXB_CXL_DEVICE,
|
|
|
|
&ambig);
|
|
|
|
if (!o) {
|
|
|
|
error_setg(errp, "Could not resolve CXLFM target %s",
|
|
|
|
fw->targets[i]);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
fw->target_hbs[i] = PXB_CXL_DEV(o);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2022-04-29 17:40:58 +03:00
|
|
|
|
|
|
|
/* TODO: support, multiple hdm decoders */
|
|
|
|
static bool cxl_hdm_find_target(uint32_t *cache_mem, hwaddr addr,
|
|
|
|
uint8_t *target)
|
|
|
|
{
|
|
|
|
uint32_t ctrl;
|
|
|
|
uint32_t ig_enc;
|
|
|
|
uint32_t iw_enc;
|
|
|
|
uint32_t target_idx;
|
|
|
|
|
|
|
|
ctrl = cache_mem[R_CXL_HDM_DECODER0_CTRL];
|
|
|
|
if (!FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED)) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
ig_enc = FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, IG);
|
|
|
|
iw_enc = FIELD_EX32(ctrl, CXL_HDM_DECODER0_CTRL, IW);
|
|
|
|
target_idx = (addr / cxl_decode_ig(ig_enc)) % (1 << iw_enc);
|
|
|
|
|
2022-08-08 15:20:51 +03:00
|
|
|
if (target_idx < 4) {
|
|
|
|
*target = extract32(cache_mem[R_CXL_HDM_DECODER0_TARGET_LIST_LO],
|
|
|
|
target_idx * 8, 8);
|
2022-04-29 17:40:58 +03:00
|
|
|
} else {
|
2022-08-08 15:20:51 +03:00
|
|
|
*target = extract32(cache_mem[R_CXL_HDM_DECODER0_TARGET_LIST_HI],
|
|
|
|
(target_idx - 4) * 8, 8);
|
2022-04-29 17:40:58 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static PCIDevice *cxl_cfmws_find_device(CXLFixedWindow *fw, hwaddr addr)
|
|
|
|
{
|
2022-06-16 17:51:25 +03:00
|
|
|
CXLComponentState *hb_cstate, *usp_cstate;
|
2022-04-29 17:40:58 +03:00
|
|
|
PCIHostState *hb;
|
2022-06-16 17:51:25 +03:00
|
|
|
CXLUpstreamPort *usp;
|
2022-04-29 17:40:58 +03:00
|
|
|
int rb_index;
|
|
|
|
uint32_t *cache_mem;
|
|
|
|
uint8_t target;
|
|
|
|
bool target_found;
|
|
|
|
PCIDevice *rp, *d;
|
|
|
|
|
|
|
|
/* Address is relative to memory region. Convert to HPA */
|
|
|
|
addr += fw->base;
|
|
|
|
|
|
|
|
rb_index = (addr / cxl_decode_ig(fw->enc_int_gran)) % fw->num_targets;
|
|
|
|
hb = PCI_HOST_BRIDGE(fw->target_hbs[rb_index]->cxl.cxl_host_bridge);
|
|
|
|
if (!hb || !hb->bus || !pci_bus_is_cxl(hb->bus)) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
hb_cstate = cxl_get_hb_cstate(hb);
|
|
|
|
if (!hb_cstate) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
cache_mem = hb_cstate->crb.cache_mem_registers;
|
|
|
|
|
|
|
|
target_found = cxl_hdm_find_target(cache_mem, addr, &target);
|
|
|
|
if (!target_found) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
rp = pcie_find_port_by_pn(hb->bus, target);
|
|
|
|
if (!rp) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
d = pci_bridge_get_sec_bus(PCI_BRIDGE(rp))->devices[0];
|
2022-06-16 17:51:25 +03:00
|
|
|
if (!d) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
|
|
|
|
return d;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Could also be a switch. Note only one level of switching currently
|
|
|
|
* supported.
|
|
|
|
*/
|
|
|
|
if (!object_dynamic_cast(OBJECT(d), TYPE_CXL_USP)) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
usp = CXL_USP(d);
|
|
|
|
|
|
|
|
usp_cstate = cxl_usp_to_cstate(usp);
|
|
|
|
if (!usp_cstate) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
cache_mem = usp_cstate->crb.cache_mem_registers;
|
|
|
|
|
|
|
|
target_found = cxl_hdm_find_target(cache_mem, addr, &target);
|
|
|
|
if (!target_found) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
d = pcie_find_port_by_pn(&PCI_BRIDGE(d)->sec_bus, target);
|
|
|
|
if (!d) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
d = pci_bridge_get_sec_bus(PCI_BRIDGE(d))->devices[0];
|
|
|
|
if (!d) {
|
|
|
|
return NULL;
|
|
|
|
}
|
2022-04-29 17:40:58 +03:00
|
|
|
|
2022-06-16 17:51:25 +03:00
|
|
|
if (!object_dynamic_cast(OBJECT(d), TYPE_CXL_TYPE3)) {
|
2022-04-29 17:40:58 +03:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return d;
|
|
|
|
}
|
|
|
|
|
|
|
|
static MemTxResult cxl_read_cfmws(void *opaque, hwaddr addr, uint64_t *data,
|
|
|
|
unsigned size, MemTxAttrs attrs)
|
|
|
|
{
|
|
|
|
CXLFixedWindow *fw = opaque;
|
|
|
|
PCIDevice *d;
|
|
|
|
|
|
|
|
d = cxl_cfmws_find_device(fw, addr);
|
|
|
|
if (d == NULL) {
|
|
|
|
*data = 0;
|
|
|
|
/* Reads to invalid address return poison */
|
|
|
|
return MEMTX_ERROR;
|
|
|
|
}
|
|
|
|
|
|
|
|
return cxl_type3_read(d, addr + fw->base, data, size, attrs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static MemTxResult cxl_write_cfmws(void *opaque, hwaddr addr,
|
|
|
|
uint64_t data, unsigned size,
|
|
|
|
MemTxAttrs attrs)
|
|
|
|
{
|
|
|
|
CXLFixedWindow *fw = opaque;
|
|
|
|
PCIDevice *d;
|
|
|
|
|
|
|
|
d = cxl_cfmws_find_device(fw, addr);
|
|
|
|
if (d == NULL) {
|
|
|
|
/* Writes to invalid address are silent */
|
|
|
|
return MEMTX_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
return cxl_type3_write(d, addr + fw->base, data, size, attrs);
|
|
|
|
}
|
|
|
|
|
|
|
|
const MemoryRegionOps cfmws_ops = {
|
|
|
|
.read_with_attrs = cxl_read_cfmws,
|
|
|
|
.write_with_attrs = cxl_write_cfmws,
|
|
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
|
|
.valid = {
|
|
|
|
.min_access_size = 1,
|
|
|
|
.max_access_size = 8,
|
|
|
|
.unaligned = true,
|
|
|
|
},
|
|
|
|
.impl = {
|
|
|
|
.min_access_size = 1,
|
|
|
|
.max_access_size = 8,
|
|
|
|
.unaligned = true,
|
|
|
|
},
|
|
|
|
};
|
2022-06-08 17:54:33 +03:00
|
|
|
|
|
|
|
static void machine_get_cxl(Object *obj, Visitor *v, const char *name,
|
|
|
|
void *opaque, Error **errp)
|
|
|
|
{
|
|
|
|
CXLState *cxl_state = opaque;
|
|
|
|
bool value = cxl_state->is_enabled;
|
|
|
|
|
|
|
|
visit_type_bool(v, name, &value, errp);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void machine_set_cxl(Object *obj, Visitor *v, const char *name,
|
|
|
|
void *opaque, Error **errp)
|
|
|
|
{
|
|
|
|
CXLState *cxl_state = opaque;
|
|
|
|
bool value;
|
|
|
|
|
|
|
|
if (!visit_type_bool(v, name, &value, errp)) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
cxl_state->is_enabled = value;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void machine_get_cfmw(Object *obj, Visitor *v, const char *name,
|
|
|
|
void *opaque, Error **errp)
|
|
|
|
{
|
|
|
|
CXLFixedMemoryWindowOptionsList **list = opaque;
|
|
|
|
|
|
|
|
visit_type_CXLFixedMemoryWindowOptionsList(v, name, list, errp);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void machine_set_cfmw(Object *obj, Visitor *v, const char *name,
|
|
|
|
void *opaque, Error **errp)
|
|
|
|
{
|
|
|
|
CXLState *state = opaque;
|
|
|
|
CXLFixedMemoryWindowOptionsList *cfmw_list = NULL;
|
|
|
|
CXLFixedMemoryWindowOptionsList *it;
|
|
|
|
|
|
|
|
visit_type_CXLFixedMemoryWindowOptionsList(v, name, &cfmw_list, errp);
|
|
|
|
if (!cfmw_list) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (it = cfmw_list; it; it = it->next) {
|
|
|
|
cxl_fixed_memory_window_config(state, it->value, errp);
|
|
|
|
}
|
|
|
|
state->cfmw_list = cfmw_list;
|
|
|
|
}
|
|
|
|
|
|
|
|
void cxl_machine_init(Object *obj, CXLState *state)
|
|
|
|
{
|
|
|
|
object_property_add(obj, "cxl", "bool", machine_get_cxl,
|
|
|
|
machine_set_cxl, NULL, state);
|
|
|
|
object_property_set_description(obj, "cxl",
|
|
|
|
"Set on/off to enable/disable "
|
|
|
|
"CXL instantiation");
|
|
|
|
|
|
|
|
object_property_add(obj, "cxl-fmw", "CXLFixedMemoryWindow",
|
|
|
|
machine_get_cfmw, machine_set_cfmw,
|
|
|
|
NULL, state);
|
|
|
|
object_property_set_description(obj, "cxl-fmw",
|
|
|
|
"CXL Fixed Memory Windows (array)");
|
|
|
|
}
|
2022-06-08 17:54:37 +03:00
|
|
|
|
|
|
|
void cxl_hook_up_pxb_registers(PCIBus *bus, CXLState *state, Error **errp)
|
|
|
|
{
|
|
|
|
/* Walk the pci busses looking for pxb busses to hook up */
|
|
|
|
if (bus) {
|
|
|
|
QLIST_FOREACH(bus, &bus->child, sibling) {
|
|
|
|
if (!pci_bus_is_root(bus)) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (pci_bus_is_cxl(bus)) {
|
|
|
|
if (!state->is_enabled) {
|
|
|
|
error_setg(errp, "CXL host bridges present, but cxl=off");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
pxb_cxl_hook_up_registers(state, bus, errp);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|