qemu/migration/block-dirty-bitmap.c

1233 lines
37 KiB
C
Raw Normal View History

/*
* Block dirty bitmap postcopy migration
*
* Copyright IBM, Corp. 2009
* Copyright (c) 2016-2017 Virtuozzo International GmbH. All rights reserved.
*
* Authors:
* Liran Schour <lirans@il.ibm.com>
* Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
* This file is derived from migration/block.c, so it's author and IBM copyright
* are here, although content is quite different.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*
* ***
*
* Here postcopy migration of dirty bitmaps is realized. Only QMP-addressable
* bitmaps are migrated.
*
* Bitmap migration implies creating bitmap with the same name and granularity
* in destination QEMU. If the bitmap with the same name (for the same node)
* already exists on destination an error will be generated.
*
* format of migration:
*
* # Header (shared for different chunk types)
* 1, 2 or 4 bytes: flags (see qemu_{put,put}_flags)
* [ 1 byte: node alias size ] \ flags & DEVICE_NAME
* [ n bytes: node alias ] /
* [ 1 byte: bitmap alias size ] \ flags & BITMAP_NAME
* [ n bytes: bitmap alias ] /
*
* # Start of bitmap migration (flags & START)
* header
* be64: granularity
* 1 byte: bitmap flags (corresponds to BdrvDirtyBitmap)
* bit 0 - bitmap is enabled
* bit 1 - bitmap is persistent
* bit 2 - bitmap is autoloading
* bits 3-7 - reserved, must be zero
*
* # Complete of bitmap migration (flags & COMPLETE)
* header
*
* # Data chunk of bitmap migration
* header
* be64: start sector
* be32: number of sectors
* [ be64: buffer size ] \ ! (flags & ZEROES)
* [ n bytes: buffer ] /
*
* The last chunk in stream should contain flags & EOS. The chunk may skip
* device and/or bitmap names, assuming them to be the same with the previous
* chunk.
*/
#include "qemu/osdep.h"
#include "block/block.h"
#include "block/block_int.h"
#include "sysemu/block-backend.h"
#include "sysemu/runstate.h"
#include "qemu/main-loop.h"
#include "qemu/error-report.h"
#include "migration/misc.h"
#include "migration/migration.h"
#include "qemu-file.h"
#include "migration/vmstate.h"
#include "migration/register.h"
#include "qemu/hbitmap.h"
#include "qemu/cutils.h"
#include "qemu/id.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-migration.h"
#include "trace.h"
#define CHUNK_SIZE (1 << 10)
/* Flags occupy one, two or four bytes (Big Endian). The size is determined as
* follows:
* in first (most significant) byte bit 8 is clear --> one byte
* in first byte bit 8 is set --> two or four bytes, depending on second
* byte:
* | in second byte bit 8 is clear --> two bytes
* | in second byte bit 8 is set --> four bytes
*/
#define DIRTY_BITMAP_MIG_FLAG_EOS 0x01
#define DIRTY_BITMAP_MIG_FLAG_ZEROES 0x02
#define DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME 0x04
#define DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME 0x08
#define DIRTY_BITMAP_MIG_FLAG_START 0x10
#define DIRTY_BITMAP_MIG_FLAG_COMPLETE 0x20
#define DIRTY_BITMAP_MIG_FLAG_BITS 0x40
#define DIRTY_BITMAP_MIG_EXTRA_FLAGS 0x80
#define DIRTY_BITMAP_MIG_START_FLAG_ENABLED 0x01
#define DIRTY_BITMAP_MIG_START_FLAG_PERSISTENT 0x02
/* 0x04 was "AUTOLOAD" flags on older versions, now it is ignored */
#define DIRTY_BITMAP_MIG_START_FLAG_RESERVED_MASK 0xf8
/* State of one bitmap during save process */
typedef struct SaveBitmapState {
/* Written during setup phase. */
BlockDriverState *bs;
char *node_alias;
char *bitmap_alias;
BdrvDirtyBitmap *bitmap;
uint64_t total_sectors;
uint64_t sectors_per_chunk;
QSIMPLEQ_ENTRY(SaveBitmapState) entry;
uint8_t flags;
/* For bulk phase. */
bool bulk_completed;
uint64_t cur_sector;
} SaveBitmapState;
/* State of the dirty bitmap migration (DBM) during save process */
typedef struct DBMSaveState {
QSIMPLEQ_HEAD(, SaveBitmapState) dbms_list;
bool bulk_completed;
bool no_bitmaps;
/* for send_bitmap_bits() */
BlockDriverState *prev_bs;
BdrvDirtyBitmap *prev_bitmap;
} DBMSaveState;
typedef struct LoadBitmapState {
BlockDriverState *bs;
BdrvDirtyBitmap *bitmap;
bool migrated;
bool enabled;
} LoadBitmapState;
/* State of the dirty bitmap migration (DBM) during load process */
typedef struct DBMLoadState {
uint32_t flags;
char node_alias[256];
char bitmap_alias[256];
char bitmap_name[BDRV_BITMAP_MAX_NAME_SIZE + 1];
BlockDriverState *bs;
BdrvDirtyBitmap *bitmap;
bool before_vm_start_handled; /* set in dirty_bitmap_mig_before_vm_start */
/*
* cancelled
* Incoming migration is cancelled for some reason. That means that we
* still should read our chunks from migration stream, to not affect other
* migration objects (like RAM), but just ignore them and do not touch any
* bitmaps or nodes.
*/
bool cancelled;
GSList *bitmaps;
QemuMutex lock; /* protect bitmaps */
} DBMLoadState;
typedef struct DBMState {
DBMSaveState save;
DBMLoadState load;
} DBMState;
static DBMState dbm_state;
/* For hash tables that map node/bitmap names to aliases */
typedef struct AliasMapInnerNode {
char *string;
GHashTable *subtree;
} AliasMapInnerNode;
static void free_alias_map_inner_node(void *amin_ptr)
{
AliasMapInnerNode *amin = amin_ptr;
g_free(amin->string);
g_hash_table_unref(amin->subtree);
g_free(amin);
}
/**
* Construct an alias map based on the given QMP structure.
*
* (Note that we cannot store such maps in the MigrationParameters
* object, because that struct is defined by the QAPI schema, which
* makes it basically impossible to have dicts with arbitrary keys.
* Therefore, we instead have to construct these maps when migration
* starts.)
*
* @bbm is the block_bitmap_mapping from the migration parameters.
*
* If @name_to_alias is true, the returned hash table will map node
* and bitmap names to their respective aliases (for outgoing
* migration).
*
* If @name_to_alias is false, the returned hash table will map node
* and bitmap aliases to their respective names (for incoming
* migration).
*
* The hash table maps node names/aliases to AliasMapInnerNode
* objects, whose .string is the respective node alias/name, and whose
* .subtree table maps bitmap names/aliases to the respective bitmap
* alias/name.
*/
static GHashTable *construct_alias_map(const BitmapMigrationNodeAliasList *bbm,
bool name_to_alias,
Error **errp)
{
GHashTable *alias_map;
size_t max_node_name_len = sizeof_field(BlockDriverState, node_name) - 1;
alias_map = g_hash_table_new_full(g_str_hash, g_str_equal,
g_free, free_alias_map_inner_node);
for (; bbm; bbm = bbm->next) {
const BitmapMigrationNodeAlias *bmna = bbm->value;
const BitmapMigrationBitmapAliasList *bmbal;
AliasMapInnerNode *amin;
GHashTable *bitmaps_map;
const char *node_map_from, *node_map_to;
if (!id_wellformed(bmna->alias)) {
error_setg(errp, "The node alias '%s' is not well-formed",
bmna->alias);
goto fail;
}
if (strlen(bmna->alias) > UINT8_MAX) {
error_setg(errp, "The node alias '%s' is longer than %u bytes",
bmna->alias, UINT8_MAX);
goto fail;
}
if (strlen(bmna->node_name) > max_node_name_len) {
error_setg(errp, "The node name '%s' is longer than %zu bytes",
bmna->node_name, max_node_name_len);
goto fail;
}
if (name_to_alias) {
if (g_hash_table_contains(alias_map, bmna->node_name)) {
error_setg(errp, "The node name '%s' is mapped twice",
bmna->node_name);
goto fail;
}
node_map_from = bmna->node_name;
node_map_to = bmna->alias;
} else {
if (g_hash_table_contains(alias_map, bmna->alias)) {
error_setg(errp, "The node alias '%s' is used twice",
bmna->alias);
goto fail;
}
node_map_from = bmna->alias;
node_map_to = bmna->node_name;
}
bitmaps_map = g_hash_table_new_full(g_str_hash, g_str_equal,
g_free, g_free);
amin = g_new(AliasMapInnerNode, 1);
*amin = (AliasMapInnerNode){
.string = g_strdup(node_map_to),
.subtree = bitmaps_map,
};
g_hash_table_insert(alias_map, g_strdup(node_map_from), amin);
for (bmbal = bmna->bitmaps; bmbal; bmbal = bmbal->next) {
const BitmapMigrationBitmapAlias *bmba = bmbal->value;
const char *bmap_map_from, *bmap_map_to;
if (strlen(bmba->alias) > UINT8_MAX) {
error_setg(errp,
"The bitmap alias '%s' is longer than %u bytes",
bmba->alias, UINT8_MAX);
goto fail;
}
if (strlen(bmba->name) > BDRV_BITMAP_MAX_NAME_SIZE) {
error_setg(errp, "The bitmap name '%s' is longer than %d bytes",
bmba->name, BDRV_BITMAP_MAX_NAME_SIZE);
goto fail;
}
if (name_to_alias) {
bmap_map_from = bmba->name;
bmap_map_to = bmba->alias;
if (g_hash_table_contains(bitmaps_map, bmba->name)) {
error_setg(errp, "The bitmap '%s'/'%s' is mapped twice",
bmna->node_name, bmba->name);
goto fail;
}
} else {
bmap_map_from = bmba->alias;
bmap_map_to = bmba->name;
if (g_hash_table_contains(bitmaps_map, bmba->alias)) {
error_setg(errp, "The bitmap alias '%s'/'%s' is used twice",
bmna->alias, bmba->alias);
goto fail;
}
}
g_hash_table_insert(bitmaps_map,
g_strdup(bmap_map_from), g_strdup(bmap_map_to));
}
}
return alias_map;
fail:
g_hash_table_destroy(alias_map);
return NULL;
}
/**
* Run construct_alias_map() in both directions to check whether @bbm
* is valid.
* (This function is to be used by migration/migration.c to validate
* the user-specified block-bitmap-mapping migration parameter.)
*
* Returns true if and only if the mapping is valid.
*/
bool check_dirty_bitmap_mig_alias_map(const BitmapMigrationNodeAliasList *bbm,
Error **errp)
{
GHashTable *alias_map;
alias_map = construct_alias_map(bbm, true, errp);
if (!alias_map) {
return false;
}
g_hash_table_destroy(alias_map);
alias_map = construct_alias_map(bbm, false, errp);
if (!alias_map) {
return false;
}
g_hash_table_destroy(alias_map);
return true;
}
static uint32_t qemu_get_bitmap_flags(QEMUFile *f)
{
uint8_t flags = qemu_get_byte(f);
if (flags & DIRTY_BITMAP_MIG_EXTRA_FLAGS) {
flags = flags << 8 | qemu_get_byte(f);
if (flags & DIRTY_BITMAP_MIG_EXTRA_FLAGS) {
flags = flags << 16 | qemu_get_be16(f);
}
}
return flags;
}
static void qemu_put_bitmap_flags(QEMUFile *f, uint32_t flags)
{
/* The code currently does not send flags as more than one byte */
assert(!(flags & (0xffffff00 | DIRTY_BITMAP_MIG_EXTRA_FLAGS)));
qemu_put_byte(f, flags);
}
static void send_bitmap_header(QEMUFile *f, DBMSaveState *s,
SaveBitmapState *dbms, uint32_t additional_flags)
{
BlockDriverState *bs = dbms->bs;
BdrvDirtyBitmap *bitmap = dbms->bitmap;
uint32_t flags = additional_flags;
trace_send_bitmap_header_enter();
if (bs != s->prev_bs) {
s->prev_bs = bs;
flags |= DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME;
}
if (bitmap != s->prev_bitmap) {
s->prev_bitmap = bitmap;
flags |= DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME;
}
qemu_put_bitmap_flags(f, flags);
if (flags & DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME) {
qemu_put_counted_string(f, dbms->node_alias);
}
if (flags & DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME) {
qemu_put_counted_string(f, dbms->bitmap_alias);
}
}
static void send_bitmap_start(QEMUFile *f, DBMSaveState *s,
SaveBitmapState *dbms)
{
send_bitmap_header(f, s, dbms, DIRTY_BITMAP_MIG_FLAG_START);
qemu_put_be32(f, bdrv_dirty_bitmap_granularity(dbms->bitmap));
qemu_put_byte(f, dbms->flags);
}
static void send_bitmap_complete(QEMUFile *f, DBMSaveState *s,
SaveBitmapState *dbms)
{
send_bitmap_header(f, s, dbms, DIRTY_BITMAP_MIG_FLAG_COMPLETE);
}
static void send_bitmap_bits(QEMUFile *f, DBMSaveState *s,
SaveBitmapState *dbms,
uint64_t start_sector, uint32_t nr_sectors)
{
/* align for buffer_is_zero() */
uint64_t align = 4 * sizeof(long);
uint64_t unaligned_size =
bdrv_dirty_bitmap_serialization_size(
dbms->bitmap, start_sector << BDRV_SECTOR_BITS,
(uint64_t)nr_sectors << BDRV_SECTOR_BITS);
uint64_t buf_size = QEMU_ALIGN_UP(unaligned_size, align);
uint8_t *buf = g_malloc0(buf_size);
uint32_t flags = DIRTY_BITMAP_MIG_FLAG_BITS;
bdrv_dirty_bitmap_serialize_part(
dbms->bitmap, buf, start_sector << BDRV_SECTOR_BITS,
(uint64_t)nr_sectors << BDRV_SECTOR_BITS);
if (buffer_is_zero(buf, buf_size)) {
g_free(buf);
buf = NULL;
flags |= DIRTY_BITMAP_MIG_FLAG_ZEROES;
}
trace_send_bitmap_bits(flags, start_sector, nr_sectors, buf_size);
send_bitmap_header(f, s, dbms, flags);
qemu_put_be64(f, start_sector);
qemu_put_be32(f, nr_sectors);
/* if a block is zero we need to flush here since the network
* bandwidth is now a lot higher than the storage device bandwidth.
* thus if we queue zero blocks we slow down the migration. */
if (flags & DIRTY_BITMAP_MIG_FLAG_ZEROES) {
qemu_fflush(f);
} else {
qemu_put_be64(f, buf_size);
qemu_put_buffer(f, buf, buf_size);
}
g_free(buf);
}
/* Called with iothread lock taken. */
static void dirty_bitmap_do_save_cleanup(DBMSaveState *s)
{
SaveBitmapState *dbms;
while ((dbms = QSIMPLEQ_FIRST(&s->dbms_list)) != NULL) {
QSIMPLEQ_REMOVE_HEAD(&s->dbms_list, entry);
bdrv_dirty_bitmap_set_busy(dbms->bitmap, false);
bdrv_unref(dbms->bs);
g_free(dbms->node_alias);
g_free(dbms->bitmap_alias);
g_free(dbms);
}
}
/* Called with iothread lock taken. */
static int add_bitmaps_to_list(DBMSaveState *s, BlockDriverState *bs,
const char *bs_name, GHashTable *alias_map)
{
BdrvDirtyBitmap *bitmap;
SaveBitmapState *dbms;
GHashTable *bitmap_aliases;
const char *node_alias, *bitmap_name, *bitmap_alias;
Error *local_err = NULL;
/* When an alias map is given, @bs_name must be @bs's node name */
assert(!alias_map || !strcmp(bs_name, bdrv_get_node_name(bs)));
FOR_EACH_DIRTY_BITMAP(bs, bitmap) {
if (bdrv_dirty_bitmap_name(bitmap)) {
break;
}
}
if (!bitmap) {
return 0;
}
bitmap_name = bdrv_dirty_bitmap_name(bitmap);
if (!bs_name || strcmp(bs_name, "") == 0) {
error_report("Bitmap '%s' in unnamed node can't be migrated",
bitmap_name);
return -1;
}
if (alias_map) {
const AliasMapInnerNode *amin = g_hash_table_lookup(alias_map, bs_name);
if (!amin) {
/* Skip bitmaps on nodes with no alias */
return 0;
}
node_alias = amin->string;
bitmap_aliases = amin->subtree;
} else {
node_alias = bs_name;
bitmap_aliases = NULL;
}
if (node_alias[0] == '#') {
error_report("Bitmap '%s' in a node with auto-generated "
"name '%s' can't be migrated",
bitmap_name, node_alias);
return -1;
}
FOR_EACH_DIRTY_BITMAP(bs, bitmap) {
bitmap_name = bdrv_dirty_bitmap_name(bitmap);
if (!bitmap_name) {
continue;
}
if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_DEFAULT, &local_err)) {
error_report_err(local_err);
return -1;
}
if (bitmap_aliases) {
bitmap_alias = g_hash_table_lookup(bitmap_aliases, bitmap_name);
if (!bitmap_alias) {
/* Skip bitmaps with no alias */
continue;
}
} else {
if (strlen(bitmap_name) > UINT8_MAX) {
error_report("Cannot migrate bitmap '%s' on node '%s': "
"Name is longer than %u bytes",
bitmap_name, bs_name, UINT8_MAX);
return -1;
}
bitmap_alias = bitmap_name;
}
bdrv_ref(bs);
bdrv_dirty_bitmap_set_busy(bitmap, true);
dbms = g_new0(SaveBitmapState, 1);
dbms->bs = bs;
dbms->node_alias = g_strdup(node_alias);
dbms->bitmap_alias = g_strdup(bitmap_alias);
dbms->bitmap = bitmap;
dbms->total_sectors = bdrv_nb_sectors(bs);
dbms->sectors_per_chunk = CHUNK_SIZE * 8 *
bdrv_dirty_bitmap_granularity(bitmap) >> BDRV_SECTOR_BITS;
if (bdrv_dirty_bitmap_enabled(bitmap)) {
dbms->flags |= DIRTY_BITMAP_MIG_START_FLAG_ENABLED;
}
if (bdrv_dirty_bitmap_get_persistence(bitmap)) {
dbms->flags |= DIRTY_BITMAP_MIG_START_FLAG_PERSISTENT;
}
QSIMPLEQ_INSERT_TAIL(&s->dbms_list, dbms, entry);
}
return 0;
}
/* Called with iothread lock taken. */
static int init_dirty_bitmap_migration(DBMSaveState *s)
{
BlockDriverState *bs;
SaveBitmapState *dbms;
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
GHashTable *handled_by_blk = g_hash_table_new(NULL, NULL);
BlockBackend *blk;
const MigrationParameters *mig_params = &migrate_get_current()->parameters;
GHashTable *alias_map = NULL;
if (mig_params->has_block_bitmap_mapping) {
alias_map = construct_alias_map(mig_params->block_bitmap_mapping, true,
&error_abort);
}
s->bulk_completed = false;
s->prev_bs = NULL;
s->prev_bitmap = NULL;
s->no_bitmaps = false;
if (!alias_map) {
/*
* Use blockdevice name for direct (or filtered) children of named block
* backends.
*/
for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
const char *name = blk_name(blk);
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
if (!name || strcmp(name, "") == 0) {
continue;
}
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
bs = blk_bs(blk);
/* Skip filters without bitmaps */
while (bs && bs->drv && bs->drv->is_filter &&
!bdrv_has_named_bitmaps(bs))
{
bs = bdrv_filter_bs(bs);
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
}
if (bs && bs->drv && !bs->drv->is_filter) {
if (add_bitmaps_to_list(s, bs, name, NULL)) {
goto fail;
}
g_hash_table_add(handled_by_blk, bs);
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
}
}
}
for (bs = bdrv_next_all_states(NULL); bs; bs = bdrv_next_all_states(bs)) {
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
if (g_hash_table_contains(handled_by_blk, bs)) {
continue;
}
if (add_bitmaps_to_list(s, bs, bdrv_get_node_name(bs), alias_map)) {
goto fail;
}
}
dirty-bitmaps: clean-up bitmaps loading and migration logic This patch aims to bring the following behavior: 1. We don't load bitmaps, when started in inactive mode. It's the case of incoming migration. In this case we wait for bitmaps migration through migration channel (if 'dirty-bitmaps' capability is enabled) or for invalidation (to load bitmaps from the image). 2. We don't remove persistent bitmaps on inactivation. Instead, we only remove bitmaps after storing. This is the only way to restore bitmaps, if we decided to resume source after [failed] migration with 'dirty-bitmaps' capability enabled (which means, that bitmaps were not stored). 3. We load bitmaps on open and any invalidation, it's ok for all cases: - normal open - migration target invalidation with dirty-bitmaps capability (bitmaps are migrating through migration channel, the are not stored, so they should have IN_USE flag set and will be skipped when loading. However, it would fail if bitmaps are read-only[1]) - migration target invalidation without dirty-bitmaps capability (normal load of the bitmaps, if migrated with shared storage) - source invalidation with dirty-bitmaps capability (skip because IN_USE) - source invalidation without dirty-bitmaps capability (bitmaps were dropped, reload them) [1]: to accurately handle this, migration of read-only bitmaps is explicitly forbidden in this patch. New mechanism for not storing bitmaps when migrate with dirty-bitmaps capability is introduced: migration filed in BdrvDirtyBitmap. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29 23:23:17 +03:00
/* unset migration flags here, to not roll back it */
QSIMPLEQ_FOREACH(dbms, &s->dbms_list, entry) {
bdrv_dirty_bitmap_skip_store(dbms->bitmap, true);
}
if (QSIMPLEQ_EMPTY(&s->dbms_list)) {
s->no_bitmaps = true;
}
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
g_hash_table_destroy(handled_by_blk);
if (alias_map) {
g_hash_table_destroy(alias_map);
}
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
return 0;
fail:
migration: fix bitmaps pre-blockdev migration with mirror job Important thing for bitmap migration is to select destination block node to obtain the migrated bitmap. Prepatch, on source we use bdrv_get_device_or_node_name() to identify the node, and on target we do bdrv_lookup_bs. bdrv_get_device_or_node_name() returns blk name only for direct children of blk. So, bitmaps of direct children of blks are migrated by blk name and others - by node name. Old libvirt is unprepared to bitmap migration by node-name, node-names are mostly auto-generated. So actually only migration by blk name works for it. Newer libvirt will use new interface (which will be added soon) to specify node-mapping for bitmaps migration explicitly. Still, let's improve the current behavior a bit. Now, consider classic libvirt migrations assisted by mirror block job: mirror block job inserts filter, so our source is not a direct child of blk, and bitmaps are migrated by node-names. And this just doesn't work with auto-generated node names. Let's fix it by using blk-name even if some implicit filters are inserted. Note2: we, of course, can't skip filters and use blk name to migrate bitmaps in filtered node by blk name for this blk if these filters have named bitmaps which should be migrated. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment typo fix, shorter subject line] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-22 01:06:45 +03:00
g_hash_table_destroy(handled_by_blk);
if (alias_map) {
g_hash_table_destroy(alias_map);
}
dirty_bitmap_do_save_cleanup(s);
return -1;
}
/* Called with no lock taken. */
static void bulk_phase_send_chunk(QEMUFile *f, DBMSaveState *s,
SaveBitmapState *dbms)
{
uint32_t nr_sectors = MIN(dbms->total_sectors - dbms->cur_sector,
dbms->sectors_per_chunk);
send_bitmap_bits(f, s, dbms, dbms->cur_sector, nr_sectors);
dbms->cur_sector += nr_sectors;
if (dbms->cur_sector >= dbms->total_sectors) {
dbms->bulk_completed = true;
}
}
/* Called with no lock taken. */
static void bulk_phase(QEMUFile *f, DBMSaveState *s, bool limit)
{
SaveBitmapState *dbms;
QSIMPLEQ_FOREACH(dbms, &s->dbms_list, entry) {
while (!dbms->bulk_completed) {
bulk_phase_send_chunk(f, s, dbms);
if (limit && qemu_file_rate_limit(f)) {
return;
}
}
}
s->bulk_completed = true;
}
/* for SaveVMHandlers */
static void dirty_bitmap_save_cleanup(void *opaque)
{
DBMSaveState *s = &((DBMState *)opaque)->save;
dirty_bitmap_do_save_cleanup(s);
}
static int dirty_bitmap_save_iterate(QEMUFile *f, void *opaque)
{
DBMSaveState *s = &((DBMState *)opaque)->save;
trace_dirty_bitmap_save_iterate(migration_in_postcopy());
if (migration_in_postcopy() && !s->bulk_completed) {
bulk_phase(f, s, true);
}
qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS);
return s->bulk_completed;
}
/* Called with iothread lock taken. */
static int dirty_bitmap_save_complete(QEMUFile *f, void *opaque)
{
DBMSaveState *s = &((DBMState *)opaque)->save;
SaveBitmapState *dbms;
trace_dirty_bitmap_save_complete_enter();
if (!s->bulk_completed) {
bulk_phase(f, s, false);
}
QSIMPLEQ_FOREACH(dbms, &s->dbms_list, entry) {
send_bitmap_complete(f, s, dbms);
}
qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS);
trace_dirty_bitmap_save_complete_finish();
dirty_bitmap_save_cleanup(opaque);
return 0;
}
static void dirty_bitmap_save_pending(QEMUFile *f, void *opaque,
uint64_t max_size,
uint64_t *res_precopy_only,
uint64_t *res_compatible,
uint64_t *res_postcopy_only)
{
DBMSaveState *s = &((DBMState *)opaque)->save;
SaveBitmapState *dbms;
uint64_t pending = 0;
qemu_mutex_lock_iothread();
QSIMPLEQ_FOREACH(dbms, &s->dbms_list, entry) {
uint64_t gran = bdrv_dirty_bitmap_granularity(dbms->bitmap);
uint64_t sectors = dbms->bulk_completed ? 0 :
dbms->total_sectors - dbms->cur_sector;
pending += DIV_ROUND_UP(sectors * BDRV_SECTOR_SIZE, gran);
}
qemu_mutex_unlock_iothread();
trace_dirty_bitmap_save_pending(pending, max_size);
*res_postcopy_only += pending;
}
/* First occurrence of this bitmap. It should be created if doesn't exist */
static int dirty_bitmap_load_start(QEMUFile *f, DBMLoadState *s)
{
Error *local_err = NULL;
uint32_t granularity = qemu_get_be32(f);
uint8_t flags = qemu_get_byte(f);
LoadBitmapState *b;
if (s->cancelled) {
return 0;
}
if (s->bitmap) {
error_report("Bitmap with the same name ('%s') already exists on "
"destination", bdrv_dirty_bitmap_name(s->bitmap));
return -EINVAL;
} else {
s->bitmap = bdrv_create_dirty_bitmap(s->bs, granularity,
s->bitmap_name, &local_err);
if (!s->bitmap) {
error_report_err(local_err);
return -EINVAL;
}
}
if (flags & DIRTY_BITMAP_MIG_START_FLAG_RESERVED_MASK) {
error_report("Unknown flags in migrated dirty bitmap header: %x",
flags);
return -EINVAL;
}
if (flags & DIRTY_BITMAP_MIG_START_FLAG_PERSISTENT) {
bdrv_dirty_bitmap_set_persistence(s->bitmap, true);
}
bdrv_disable_dirty_bitmap(s->bitmap);
if (flags & DIRTY_BITMAP_MIG_START_FLAG_ENABLED) {
bdrv_dirty_bitmap_create_successor(s->bitmap, &local_err);
if (local_err) {
error_report_err(local_err);
return -EINVAL;
}
}
b = g_new(LoadBitmapState, 1);
b->bs = s->bs;
b->bitmap = s->bitmap;
b->migrated = false;
b->enabled = flags & DIRTY_BITMAP_MIG_START_FLAG_ENABLED;
s->bitmaps = g_slist_prepend(s->bitmaps, b);
return 0;
}
/*
* before_vm_start_handle_item
*
* g_slist_foreach helper
*
* item is LoadBitmapState*
* opaque is DBMLoadState*
*/
static void before_vm_start_handle_item(void *item, void *opaque)
{
DBMLoadState *s = opaque;
LoadBitmapState *b = item;
if (b->enabled) {
if (b->migrated) {
bdrv_enable_dirty_bitmap(b->bitmap);
} else {
bdrv_dirty_bitmap_enable_successor(b->bitmap);
}
}
if (b->migrated) {
s->bitmaps = g_slist_remove(s->bitmaps, b);
g_free(b);
}
}
void dirty_bitmap_mig_before_vm_start(void)
{
DBMLoadState *s = &dbm_state.load;
qemu_mutex_lock(&s->lock);
assert(!s->before_vm_start_handled);
g_slist_foreach(s->bitmaps, before_vm_start_handle_item, s);
s->before_vm_start_handled = true;
qemu_mutex_unlock(&s->lock);
}
static void cancel_incoming_locked(DBMLoadState *s)
{
GSList *item;
if (s->cancelled) {
return;
}
s->cancelled = true;
s->bs = NULL;
s->bitmap = NULL;
/* Drop all unfinished bitmaps */
for (item = s->bitmaps; item; item = g_slist_next(item)) {
LoadBitmapState *b = item->data;
/*
* Bitmap must be unfinished, as finished bitmaps should already be
* removed from the list.
*/
assert(!s->before_vm_start_handled || !b->migrated);
if (bdrv_dirty_bitmap_has_successor(b->bitmap)) {
bdrv_reclaim_dirty_bitmap(b->bitmap, &error_abort);
}
bdrv_release_dirty_bitmap(b->bitmap);
}
g_slist_free_full(s->bitmaps, g_free);
s->bitmaps = NULL;
}
void dirty_bitmap_mig_cancel_outgoing(void)
{
dirty_bitmap_do_save_cleanup(&dbm_state.save);
}
void dirty_bitmap_mig_cancel_incoming(void)
{
DBMLoadState *s = &dbm_state.load;
qemu_mutex_lock(&s->lock);
cancel_incoming_locked(s);
qemu_mutex_unlock(&s->lock);
}
static void dirty_bitmap_load_complete(QEMUFile *f, DBMLoadState *s)
{
GSList *item;
trace_dirty_bitmap_load_complete();
if (s->cancelled) {
return;
}
bdrv_dirty_bitmap_deserialize_finish(s->bitmap);
if (bdrv_dirty_bitmap_has_successor(s->bitmap)) {
bdrv_reclaim_dirty_bitmap(s->bitmap, &error_abort);
}
for (item = s->bitmaps; item; item = g_slist_next(item)) {
LoadBitmapState *b = item->data;
if (b->bitmap == s->bitmap) {
b->migrated = true;
if (s->before_vm_start_handled) {
s->bitmaps = g_slist_remove(s->bitmaps, b);
g_free(b);
}
break;
}
}
}
static int dirty_bitmap_load_bits(QEMUFile *f, DBMLoadState *s)
{
uint64_t first_byte = qemu_get_be64(f) << BDRV_SECTOR_BITS;
uint64_t nr_bytes = (uint64_t)qemu_get_be32(f) << BDRV_SECTOR_BITS;
trace_dirty_bitmap_load_bits_enter(first_byte >> BDRV_SECTOR_BITS,
nr_bytes >> BDRV_SECTOR_BITS);
if (s->flags & DIRTY_BITMAP_MIG_FLAG_ZEROES) {
trace_dirty_bitmap_load_bits_zeroes();
if (!s->cancelled) {
bdrv_dirty_bitmap_deserialize_zeroes(s->bitmap, first_byte,
nr_bytes, false);
}
} else {
size_t ret;
g_autofree uint8_t *buf = NULL;
uint64_t buf_size = qemu_get_be64(f);
uint64_t needed_size;
/*
* The actual check for buf_size is done a bit later. We can't do it in
* cancelled mode as we don't have the bitmap to check the constraints
* (so, we allocate a buffer and read prior to the check). On the other
* hand, we shouldn't blindly g_malloc the number from the stream.
* Actually one chunk should not be larger than CHUNK_SIZE. Let's allow
* a bit larger (which means that bitmap migration will fail anyway and
* the whole migration will most probably fail soon due to broken
* stream).
*/
if (buf_size > 10 * CHUNK_SIZE) {
error_report("Bitmap migration stream buffer allocation request "
"is too large");
return -EIO;
}
buf = g_malloc(buf_size);
ret = qemu_get_buffer(f, buf, buf_size);
if (ret != buf_size) {
error_report("Failed to read bitmap bits");
return -EIO;
}
if (s->cancelled) {
return 0;
}
needed_size = bdrv_dirty_bitmap_serialization_size(s->bitmap,
first_byte,
nr_bytes);
if (needed_size > buf_size ||
buf_size > QEMU_ALIGN_UP(needed_size, 4 * sizeof(long))
/* Here used same alignment as in send_bitmap_bits */
) {
error_report("Migrated bitmap granularity doesn't "
"match the destination bitmap '%s' granularity",
bdrv_dirty_bitmap_name(s->bitmap));
cancel_incoming_locked(s);
return 0;
}
bdrv_dirty_bitmap_deserialize_part(s->bitmap, buf, first_byte, nr_bytes,
false);
}
return 0;
}
static int dirty_bitmap_load_header(QEMUFile *f, DBMLoadState *s,
GHashTable *alias_map)
{
GHashTable *bitmap_alias_map = NULL;
Error *local_err = NULL;
bool nothing;
s->flags = qemu_get_bitmap_flags(f);
trace_dirty_bitmap_load_header(s->flags);
nothing = s->flags == (s->flags & DIRTY_BITMAP_MIG_FLAG_EOS);
if (s->flags & DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME) {
if (!qemu_get_counted_string(f, s->node_alias)) {
error_report("Unable to read node alias string");
return -EINVAL;
}
if (!s->cancelled) {
if (alias_map) {
const AliasMapInnerNode *amin;
amin = g_hash_table_lookup(alias_map, s->node_alias);
if (!amin) {
error_setg(&local_err, "Error: Unknown node alias '%s'",
s->node_alias);
s->bs = NULL;
} else {
bitmap_alias_map = amin->subtree;
s->bs = bdrv_lookup_bs(NULL, amin->string, &local_err);
}
} else {
s->bs = bdrv_lookup_bs(s->node_alias, s->node_alias,
&local_err);
}
if (!s->bs) {
error_report_err(local_err);
cancel_incoming_locked(s);
}
}
} else if (s->bs) {
if (alias_map) {
const AliasMapInnerNode *amin;
/* Must be present in the map, or s->bs would not be set */
amin = g_hash_table_lookup(alias_map, s->node_alias);
assert(amin != NULL);
bitmap_alias_map = amin->subtree;
}
} else if (!nothing && !s->cancelled) {
error_report("Error: block device name is not set");
cancel_incoming_locked(s);
}
assert(nothing || s->cancelled || !!alias_map == !!bitmap_alias_map);
if (s->flags & DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME) {
const char *bitmap_name;
if (!qemu_get_counted_string(f, s->bitmap_alias)) {
error_report("Unable to read bitmap alias string");
return -EINVAL;
}
if (!s->cancelled) {
if (bitmap_alias_map) {
bitmap_name = g_hash_table_lookup(bitmap_alias_map,
s->bitmap_alias);
if (!bitmap_name) {
error_report("Error: Unknown bitmap alias '%s' on node "
"'%s' (alias '%s')", s->bitmap_alias,
s->bs->node_name, s->node_alias);
cancel_incoming_locked(s);
}
} else {
bitmap_name = s->bitmap_alias;
}
}
if (!s->cancelled) {
g_strlcpy(s->bitmap_name, bitmap_name, sizeof(s->bitmap_name));
s->bitmap = bdrv_find_dirty_bitmap(s->bs, s->bitmap_name);
/*
* bitmap may be NULL here, it wouldn't be an error if it is the
* first occurrence of the bitmap
*/
if (!s->bitmap && !(s->flags & DIRTY_BITMAP_MIG_FLAG_START)) {
error_report("Error: unknown dirty bitmap "
"'%s' for block device '%s'",
s->bitmap_name, s->bs->node_name);
cancel_incoming_locked(s);
}
}
} else if (!s->bitmap && !nothing && !s->cancelled) {
error_report("Error: block device name is not set");
cancel_incoming_locked(s);
}
return 0;
}
/*
* dirty_bitmap_load
*
* Load sequence of dirty bitmap chunks. Return error only on fatal io stream
* violations. On other errors just cancel bitmaps incoming migration and return
* 0.
*
* Note, than when incoming bitmap migration is canceled, we still must read all
* our chunks (and just ignore them), to not affect other migration objects.
*/
static int dirty_bitmap_load(QEMUFile *f, void *opaque, int version_id)
{
GHashTable *alias_map = NULL;
const MigrationParameters *mig_params = &migrate_get_current()->parameters;
DBMLoadState *s = &((DBMState *)opaque)->load;
int ret = 0;
trace_dirty_bitmap_load_enter();
if (version_id != 1) {
QEMU_LOCK_GUARD(&s->lock);
cancel_incoming_locked(s);
return -EINVAL;
}
if (mig_params->has_block_bitmap_mapping) {
alias_map = construct_alias_map(mig_params->block_bitmap_mapping,
false, &error_abort);
}
do {
QEMU_LOCK_GUARD(&s->lock);
ret = dirty_bitmap_load_header(f, s, alias_map);
if (ret < 0) {
cancel_incoming_locked(s);
goto fail;
}
if (s->flags & DIRTY_BITMAP_MIG_FLAG_START) {
ret = dirty_bitmap_load_start(f, s);
} else if (s->flags & DIRTY_BITMAP_MIG_FLAG_COMPLETE) {
dirty_bitmap_load_complete(f, s);
} else if (s->flags & DIRTY_BITMAP_MIG_FLAG_BITS) {
ret = dirty_bitmap_load_bits(f, s);
}
if (!ret) {
ret = qemu_file_get_error(f);
}
if (ret) {
cancel_incoming_locked(s);
goto fail;
}
} while (!(s->flags & DIRTY_BITMAP_MIG_FLAG_EOS));
trace_dirty_bitmap_load_success();
ret = 0;
fail:
if (alias_map) {
g_hash_table_destroy(alias_map);
}
return ret;
}
static int dirty_bitmap_save_setup(QEMUFile *f, void *opaque)
{
DBMSaveState *s = &((DBMState *)opaque)->save;
SaveBitmapState *dbms = NULL;
if (init_dirty_bitmap_migration(s) < 0) {
return -1;
}
QSIMPLEQ_FOREACH(dbms, &s->dbms_list, entry) {
send_bitmap_start(f, s, dbms);
}
qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS);
return 0;
}
static bool dirty_bitmap_is_active(void *opaque)
{
DBMSaveState *s = &((DBMState *)opaque)->save;
return migrate_dirty_bitmaps() && !s->no_bitmaps;
}
static bool dirty_bitmap_is_active_iterate(void *opaque)
{
return dirty_bitmap_is_active(opaque) && !runstate_is_running();
}
static bool dirty_bitmap_has_postcopy(void *opaque)
{
return true;
}
static SaveVMHandlers savevm_dirty_bitmap_handlers = {
.save_setup = dirty_bitmap_save_setup,
.save_live_complete_postcopy = dirty_bitmap_save_complete,
.save_live_complete_precopy = dirty_bitmap_save_complete,
.has_postcopy = dirty_bitmap_has_postcopy,
.save_live_pending = dirty_bitmap_save_pending,
.save_live_iterate = dirty_bitmap_save_iterate,
.is_active_iterate = dirty_bitmap_is_active_iterate,
.load_state = dirty_bitmap_load,
.save_cleanup = dirty_bitmap_save_cleanup,
.is_active = dirty_bitmap_is_active,
};
void dirty_bitmap_mig_init(void)
{
QSIMPLEQ_INIT(&dbm_state.save.dbms_list);
qemu_mutex_init(&dbm_state.load.lock);
register_savevm_live("dirty-bitmap", 0, 1,
&savevm_dirty_bitmap_handlers,
&dbm_state);
}