hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
/*
|
|
|
|
* QEMU LSI SAS1068 Host Bus Adapter emulation
|
|
|
|
* Endianness conversion for MPI data structures
|
|
|
|
*
|
|
|
|
* Copyright (c) 2016 Red Hat, Inc.
|
|
|
|
*
|
|
|
|
* Authors: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
*
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
2020-10-23 15:44:24 +03:00
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
*
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Lesser General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "qemu/osdep.h"
|
|
|
|
#include "hw/pci/pci.h"
|
|
|
|
#include "sysemu/dma.h"
|
|
|
|
#include "hw/pci/msi.h"
|
|
|
|
#include "qemu/iov.h"
|
|
|
|
#include "hw/scsi/scsi.h"
|
2017-08-22 10:23:55 +03:00
|
|
|
#include "scsi/constants.h"
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
#include "trace.h"
|
|
|
|
|
|
|
|
#include "mptsas.h"
|
|
|
|
#include "mpi.h"
|
|
|
|
|
|
|
|
static void mptsas_fix_sgentry_endianness(MPISGEntry *sge)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
sge->FlagsLength = le32_to_cpu(sge->FlagsLength);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
if (sge->FlagsLength & MPI_SGE_FLAGS_64_BIT_ADDRESSING) {
|
2018-09-27 16:48:52 +03:00
|
|
|
sge->u.Address64 = le64_to_cpu(sge->u.Address64);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
} else {
|
2018-09-27 16:48:52 +03:00
|
|
|
sge->u.Address32 = le32_to_cpu(sge->u.Address32);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mptsas_fix_sgentry_endianness_reply(MPISGEntry *sge)
|
|
|
|
{
|
|
|
|
if (sge->FlagsLength & MPI_SGE_FLAGS_64_BIT_ADDRESSING) {
|
2018-09-27 16:48:52 +03:00
|
|
|
sge->u.Address64 = cpu_to_le64(sge->u.Address64);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
} else {
|
2018-09-27 16:48:52 +03:00
|
|
|
sge->u.Address32 = cpu_to_le32(sge->u.Address32);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
2018-09-27 16:48:52 +03:00
|
|
|
sge->FlagsLength = cpu_to_le32(sge->FlagsLength);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_scsi_io_endianness(MPIMsgSCSIIORequest *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
|
|
|
req->Control = le32_to_cpu(req->Control);
|
|
|
|
req->DataLength = le32_to_cpu(req->DataLength);
|
|
|
|
req->SenseBufferLowAddr = le32_to_cpu(req->SenseBufferLowAddr);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_scsi_io_reply_endianness(MPIMsgSCSIIOReply *reply)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
|
|
|
reply->TransferCount = cpu_to_le32(reply->TransferCount);
|
|
|
|
reply->SenseCount = cpu_to_le32(reply->SenseCount);
|
|
|
|
reply->ResponseInfo = cpu_to_le32(reply->ResponseInfo);
|
|
|
|
reply->TaskTag = cpu_to_le16(reply->TaskTag);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_scsi_task_mgmt_endianness(MPIMsgSCSITaskMgmt *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
|
|
|
req->TaskMsgContext = le32_to_cpu(req->TaskMsgContext);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_scsi_task_mgmt_reply_endianness(MPIMsgSCSITaskMgmtReply *reply)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
|
|
|
reply->TerminationCount = cpu_to_le32(reply->TerminationCount);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_ioc_init_endianness(MPIMsgIOCInit *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
|
|
|
req->ReplyFrameSize = le16_to_cpu(req->ReplyFrameSize);
|
|
|
|
req->HostMfaHighAddr = le32_to_cpu(req->HostMfaHighAddr);
|
|
|
|
req->SenseBufferHighAddr = le32_to_cpu(req->SenseBufferHighAddr);
|
|
|
|
req->ReplyFifoHostSignalingAddr =
|
|
|
|
le32_to_cpu(req->ReplyFifoHostSignalingAddr);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
mptsas_fix_sgentry_endianness(&req->HostPageBufferSGE);
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgVersion = le16_to_cpu(req->MsgVersion);
|
|
|
|
req->HeaderVersion = le16_to_cpu(req->HeaderVersion);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_ioc_init_reply_endianness(MPIMsgIOCInitReply *reply)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_ioc_facts_endianness(MPIMsgIOCFacts *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_ioc_facts_reply_endianness(MPIMsgIOCFactsReply *reply)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->MsgVersion = cpu_to_le16(reply->MsgVersion);
|
|
|
|
reply->HeaderVersion = cpu_to_le16(reply->HeaderVersion);
|
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCExceptions = cpu_to_le16(reply->IOCExceptions);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
|
|
|
reply->ReplyQueueDepth = cpu_to_le16(reply->ReplyQueueDepth);
|
|
|
|
reply->RequestFrameSize = cpu_to_le16(reply->RequestFrameSize);
|
|
|
|
reply->ProductID = cpu_to_le16(reply->ProductID);
|
|
|
|
reply->CurrentHostMfaHighAddr = cpu_to_le32(reply->CurrentHostMfaHighAddr);
|
|
|
|
reply->GlobalCredits = cpu_to_le16(reply->GlobalCredits);
|
|
|
|
reply->CurrentSenseBufferHighAddr =
|
|
|
|
cpu_to_le32(reply->CurrentSenseBufferHighAddr);
|
|
|
|
reply->CurReplyFrameSize = cpu_to_le16(reply->CurReplyFrameSize);
|
|
|
|
reply->FWImageSize = cpu_to_le32(reply->FWImageSize);
|
|
|
|
reply->IOCCapabilities = cpu_to_le32(reply->IOCCapabilities);
|
|
|
|
reply->HighPriorityQueueDepth = cpu_to_le16(reply->HighPriorityQueueDepth);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
mptsas_fix_sgentry_endianness_reply(&reply->HostPageBufferSGE);
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->ReplyFifoHostSignalingAddr =
|
|
|
|
cpu_to_le32(reply->ReplyFifoHostSignalingAddr);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_config_endianness(MPIMsgConfig *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->ExtPageLength = le16_to_cpu(req->ExtPageLength);
|
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
|
|
|
req->PageAddress = le32_to_cpu(req->PageAddress);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
mptsas_fix_sgentry_endianness(&req->PageBufferSGE);
|
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_config_reply_endianness(MPIMsgConfigReply *reply)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->ExtPageLength = cpu_to_le16(reply->ExtPageLength);
|
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_port_facts_endianness(MPIMsgPortFacts *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_port_facts_reply_endianness(MPIMsgPortFactsReply *reply)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
|
|
|
reply->MaxDevices = cpu_to_le16(reply->MaxDevices);
|
|
|
|
reply->PortSCSIID = cpu_to_le16(reply->PortSCSIID);
|
|
|
|
reply->ProtocolFlags = cpu_to_le16(reply->ProtocolFlags);
|
|
|
|
reply->MaxPostedCmdBuffers = cpu_to_le16(reply->MaxPostedCmdBuffers);
|
|
|
|
reply->MaxPersistentIDs = cpu_to_le16(reply->MaxPersistentIDs);
|
|
|
|
reply->MaxLanBuckets = cpu_to_le16(reply->MaxLanBuckets);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_port_enable_endianness(MPIMsgPortEnable *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_port_enable_reply_endianness(MPIMsgPortEnableReply *reply)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_event_notification_endianness(MPIMsgEventNotify *req)
|
|
|
|
{
|
2018-09-27 16:48:52 +03:00
|
|
|
req->MsgContext = le32_to_cpu(req->MsgContext);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void mptsas_fix_event_notification_reply_endianness(MPIMsgEventNotifyReply *reply)
|
|
|
|
{
|
|
|
|
int length = reply->EventDataLength;
|
|
|
|
int i;
|
|
|
|
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->EventDataLength = cpu_to_le16(reply->EventDataLength);
|
|
|
|
reply->MsgContext = cpu_to_le32(reply->MsgContext);
|
|
|
|
reply->IOCStatus = cpu_to_le16(reply->IOCStatus);
|
|
|
|
reply->IOCLogInfo = cpu_to_le32(reply->IOCLogInfo);
|
|
|
|
reply->Event = cpu_to_le32(reply->Event);
|
|
|
|
reply->EventContext = cpu_to_le32(reply->EventContext);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
|
|
|
|
/* Really depends on the event kind. This will do for now. */
|
|
|
|
for (i = 0; i < length; i++) {
|
2018-09-27 16:48:52 +03:00
|
|
|
reply->Data[i] = cpu_to_le32(reply->Data[i]);
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 20:26:06 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|