Explain that the followings are tracked only when track_io_timing GUC
is enabled.
- blk_read_time and blk_write_time in pg_stat_database
- time spent reading and writing data file blocks in EXPLAIN output
with BUFFERS option
Whther track_io_timing is enabled affects also blk_read_time and
blk_write_time in pg_stat_statements, but which was already documented.
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CACZ0uYHo_NwbxpLH76OGF-O=13tkR0ZM0zeyGEhZ+JEXZVRyCA@mail.gmail.com
In one or two places it seemed reasonable to modify the example so as
to shorten its output slightly; but for the most part I just added a
&zwsp; after 67 characters, which is the most we can fit on a line
of monospace text in A4 format.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
This commit adds a new option WAL similar to existing option BUFFERS in the
EXPLAIN command. This option allows to include information on WAL record
generation added by commit df3b181499 in EXPLAIN output.
This also allows the WAL usage information to be displayed via
the auto_explain module. A new parameter auto_explain.log_wal controls
whether WAL usage statistics are printed when an execution plan is logged.
This parameter has no effect unless auto_explain.log_analyze is enabled.
Author: Julien Rouhaud
Reviewed-by: Dilip Kumar and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Query planning is affected by a number of configuration options, and it
may be crucial to know which of those options were set to non-default
values. With this patch you can say EXPLAIN (SETTINGS ON) to include
that information in the query plan. Only options affecting planning,
with values different from the built-in default are printed.
This patch also adds auto_explain.log_settings option, providing the
same capability in auto_explain module.
Author: Tomas Vondra
Reviewed-by: Rafia Sabih, John Naylor
Discussion: https://postgr.es/m/e1791b4c-df9c-be02-edc5-7c8874944be0@2ndquadrant.com
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
IDs in SGML are case insensitive, and we have accumulated a mix of upper
and lower case IDs, including different variants of the same ID. In
XML, these will be case sensitive, so we need to fix up those
differences. Going to all lower case seems most straightforward, and
the current build process already makes all anchors and lower case
anyway during the SGML->XML conversion, so this doesn't create any
difference in the output right now. A future XML-only build process
would, however, maintain any mixed case ID spellings in the output, so
that is another reason to clean this up beforehand.
Author: Alexander Lakhin <exclusion@gmail.com>
For DocBook XML compatibility, don't use SGML empty tags (</>) anymore,
replace by the full tag name. Add a warning option to catch future
occurrences.
Alexander Lakhin, Jürgen Purtz
This exposes the existing explain summary option to users to allow them
to choose if they wish to have the planning time and totalled run time
included in the EXPLAIN result. The existing default behavior is
retained if SUMMARY is not specified- running explain without analyze
will not print the summary lines (just the planning time, currently)
while running explain with analyze will include the summary lines (both
the planning time and the totalled execution time).
Users who wish to see the summary information for plain explain can now
use: EXPLAIN (SUMMARY ON) query; Users who do not want to have the
summary printed for an analyze run can use:
EXPLAIN (ANALYZE ON, SUMMARY OFF) query;
With this, we can now also have EXPLAIN ANALYZE queries included in our
regression tests by using:
EXPLAIN (ANALYZE ON, TIMING OFF, SUMMARY off) query;
I went ahead and added an example of this, which will hopefully not make
the buildfarm complain.
Author: Ashutosh Bapat
Discussion: https://postgr.es/m/CAFjFpReE5z2h98U2Vuia8hcEkpRRwrauRjHmyE44hNv8-xk+XA@mail.gmail.com
We've gotten enough push-back on that change to make it clear that it
wasn't an especially good idea to do it like that. Revert plain EXPLAIN
to its previous behavior, but keep the extra output in EXPLAIN ANALYZE.
Per discussion.
Internally, I set this up as a separate flag ExplainState.summary that
controls printing of planning time and execution time. For now it's
just copied from the ANALYZE option, but we could consider exposing it
to users.
Now that EXPLAIN also outputs a "planning time" measurement, the use of
"total" here seems rather confusing: it sounds like it might include the
planning time which of course it doesn't. Majority opinion was that
"execution time" is a better label, so we'll call it that.
This should be noted as a backwards incompatibility for tools that examine
EXPLAIN ANALYZE output.
In passing, I failed to resist the temptation to do a little editing on the
materialized-view example affected by this change.
DocBook XML is superficially compatible with DocBook SGML but has a
slightly stricter DTD that we have been violating in a few cases.
Although XSLT doesn't care whether the document is valid, the style
sheets don't necessarily process invalid documents correctly, so we need
to work toward fixing this.
This first commit moves the indexterms in refentry elements to an
allowed position. It has no impact on the output.
This doesn't work for prepared queries, but it's not too easy to get
the information in that case and there's some debate as to exactly
what the right thing to measure is, so just do this for now.
Andreas Karlsson, with slight doc changes by me.
Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
I've made a significant effort at filling in the "Using EXPLAIN" section
to be reasonably complete about mentioning everything that EXPLAIN can
output, including the "Rows Removed" outputs that were added by Marko
Tiikkaja's recent documentation-free patch. I also updated the examples to
be consistent with current behavior; several of them were not close to what
the current code will do. No doubt there's more that can be done here, but
I'm out of patience for today.
The endterm attribute is mainly useful when the toolchain does not support
automatic link target text generation for a particular situation. In the
past, this was required by the man page tools for all reference page links,
but that is no longer the case, and it now actually gets in the way of
proper automatic link text generation. The only remaining use cases are
currently xrefs to refsects.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
another section if required by the platform (instead of the old way of
building them in section "l" and always transforming them to the
platform-specific section).
This speeds up the installation on common platforms, and it avoids some
funny business with the man page tools and build process.
of each plan node, instead of its former behavior of dumping the internal
representation of the plan tree. The latter display is still available for
those who really want it (see debug_print_plan), but uses for it are certainly
few and and far between. Per discussion.
This patch also removes the explain_pretty_print GUC, which is obsoleted
by the change.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
