documenting GiST crash recovery procedures, as requested some time ago
by Teodor. (The GiST chapter doesn't seem quite the right place for
the latter, but I'm not sure what else to do with it.)
a parameter in binary format. Also, add a TIP explaining how to use casts
in the query text to avoid needing to specify parameter types by OID.
Also fix bogus spacing --- apparently somebody expanded the tabs in the
example programs to 8 spaces instead of 4 when transposing them into SGML.
fix problems with replacement-string backslashes that aren't followed by
one of the expected characters, avoid giving the impression that
replace_text_regexp() is meant to be called directly as a SQL function,
etc.
the facility has been set, the facility gets set to LOCAL0 and cannot
be changed later. This seems reasonably plausible to happen, particularly
at higher debug log levels, though I am not certain it explains Han Holl's
recent report. Easiest fix is to teach the code how to change the value
on-the-fly, which is nicer anyway. I made the settings PGC_SIGHUP to
conform with log_destination.
regression=# select '23:59:59.9'::time(0);
time
----------
24:00:00
(1 row)
This is bad because:
regression=# select '24:00:00'::time(0);
ERROR: date/time field value out of range: "24:00:00"
The last example now works.
of client_min_messages (fatal + panic) are valid and also fixes a slight
issue with how psql tried to display error messages that aren't sent to
the client.
We often tell people to ignore errors in response to requests for things
like "drop if exists", but there's no good way to completely hide this
without upping client_min_messages past ERROR. When running a file like
SET client_min_messages TO 'FATAL';
DROP TABLE doesntexist;
with "psql -f filename" you get an error prefix of
"psql:/home/username/filename:3" even though there is no error message to
prefix because it isn't sent to the client.
Kris Jurka
WAL and the interaction of the new full_page_writes parameter with PITR.
The too-small WAL first sect1 has been merged with the one following
sect1 for clarity.
Some minor comments have been made in the WAL config section also.
Passes SGML make and proofread for typos.
Files changed:
patching file doc/src/sgml/backup.sgml
patching file doc/src/sgml/config.sgml
patching file doc/src/sgml/wal.sgml
Simon Riggs
> * Prevent PQfnumber() from lowercasing unquoted the column name
>
> PQfnumber() should never have been doing lowercasing, but historically
> it has so we need a way to prevent it
>
< * Prevent libpq's PQfnumber() from lowercasing the column name
<
< One idea is to lowercase all identifiers except those that are
< surrounded by quotes.
<
<
< * Add code to detect an SMP machine and handle spinlocks accordingly
< from distributted.net, http://www1.distributed.net/source,
< in client/common/cpucheck.cpp
<
< On SMP machines, it is possible that locks might be released shortly,
< while on non-SMP machines, the backend should sleep so the process
< holding the lock can complete and release it.
< o %Add dumping of comments on composite type columns
< o %Add dumping of comments on index columns
< o Stop dumping CASCADE on DROP TYPE commands in clean mode
> o %Add dumping of comments on index columns and composite type columns
604a603
> o Stop dumping CASCADE on DROP TYPE commands in clean mode
< * Prevent libpq's PQfnumber() from lowercasing the column name?
> * Prevent libpq's PQfnumber() from lowercasing the column name
>
> One idea is to lowercase all identifiers except those that are
> surrounded by quotes.
>
> o Allow selection of individual object(s) of all types, not just
> tables
> o In a selective dump, allow dumping of an object and all its
> dependencies
emit when given the --clean option, in favor of individual DROP ROLE
commands. The old technique could not possibly work in 8.1, and was
never a very good idea anyway IMHO. The DROP ROLE approach has the
defect that the DROPs will fail for roles that own objects or have
privileges, but perhaps we can improve that later.
< * Consider compressing indexes by storing key prefix values shared by
> * Consider compressing indexes by storing key values duplicated in
735a736,737
>
> This is difficult because it requires datatype-specific knowledge.
generated by bitmap index scans. Along the way, simplify and speed up
the code for counting sequential and index scans; it was both confusing
and inefficient to be taking care of that in the per-tuple loops, IMHO.
initdb forced because of internal changes in pg_stat view definitions.
argument as a 'regclass' value instead of a text string. The frontend
conversion of text string to pg_class OID is now encapsulated as an
implicitly-invocable coercion from text to regclass. This provides
backwards compatibility to the old behavior when the sequence argument
is explicitly typed as 'text'. When the argument is just an unadorned
literal string, it will be taken as 'regclass', which means that the
stored representation will be an OID. This solves longstanding problems
with renaming sequences that are referenced in default expressions, as
well as new-in-8.1 problems with renaming such sequences' schemas or
moving them to another schema. All per recent discussion.
Along the way, fix some rather serious problems in dbmirror's support
for mirroring sequence operations (int4 vs int8 confusion for instance).
relocated after installation. We can't trust the installation paths
inserted into Makefile.global by configure, so instead we must get the
paths from pg_config. This requires extending pg_config to support all
the separately-configurable path names, but that was on TODO anyway.
> * Allow protocol-level BIND parameter values to be logged
> * Allow protocol-level EXECUTE that is actually a fetch to appear
> in the logs as a fetch rather than another execute
>
> o Display IN, INOUT, and OUT parameters in \df+
>
> It probably requires psql to output newlines in the proper
> column, which is already on the TODO list.
strings. This is consistent with SQL conventions, and since Bruce
already changed initdb in a way that assumed it worked like this, seems
we'd better make it work like this.
< This would be beneficial when there are few distinct values.
> This would be beneficial when there are few distinct values. This is
> already used by GROUP BY.
946d946
< * Allow DISTINCT to use hashing like GROUP BY
<
390d388
<
453c451
< removed or have its heap and index files truncated. One
> be removed or have its heap and index files truncated. One
< * Use a phantom command counter for nested subtransactions to reduce
< per-tuple overhead
sake of brevity and clarity.
Make pg_reload_conf(), pg_rotate_logfile(), and pg_cancel_backend()
return a boolean rather than an integer to indicate success or failure.
Along the way, make some minor cleanups to dbsize.c -- in particular,
use elog() rather than ereport() for "shouldn't happen" error
conditions, and remove some of the more flagrant violations of the
Postgres indentation conventions.
Catalog version bumped.
the builtin functions (although some more entries are still needed),
and remove the duplicate index entries that have been causing
collateindex.pl warnings. Consistently use "int" and "bigint", rather
than a mix of "int", "integer", "int4", "bigint", and "int8". Make
parenthesis style in syntax examples more consistent. Various
copy-editing for newly-added documentation and SGML markup fixes.
particular the addition of bitmap scans and the relaxation of rules
about when multicolumn indexes can be used. Also some minor editorial
work in other parts of the chapter.
rather than "-" for the "dash" character. Correct SGML markup. Make
references to the names of contributors more consistent. Rewrite a bit
of prose, and make some other similar cleanups.
in the zic database or zone names found in the date token table. This
preserves the old ability to do AT TIME ZONE 'PST' along with the new
ability to do AT TIME ZONE 'PST8PDT'. Per gripe from Bricklen Anderson.
Also, fix some inconsistencies in usage of TZ_STRLEN_MAX --- the old
code had the potential for one-byte buffer overruns, though given
alignment considerations it's unlikely there was any real risk.
for procedural languages. This replaces the hard-wired table I had
originally proposed as a stopgap solution. For the moment, the initial
contents only include languages shipped with the core distribution.
as per my recent proposal. For now the template data is hard-wired in
proclang.c --- this should be replaced later by a new shared system
catalog, but we don't want to force initdb during 8.1 beta. This change
lets us cleanly load existing dump files even if they contain outright
wrong information about a PL's support functions, such as a wrong path
to the shared library or a missing validator function. Also, we can
revert the recent kluges to make pg_dump dump PL support functions that
are stored in pg_catalog.
While at it, I removed the code in pg_regress that replaced $libdir
with a hardcoded path for temporary installations. This is no longer
needed given our support for relocatable installations.
< cmin/cmax pair and is stored in local memory.
> cmin/cmax pair and is stored in local memory. Another idea is to
> store both cmin and cmax only in local memory.
< have its heap and index files truncated. One issue is
< that no other backend should be able to add to the table
< at the same time, which is something that is currently
< allowed.
> removed or have its heap and index files truncated. One
> issue is that no other backend should be able to add to
> the table at the same time, which is something that is
> currently allowed.
> o Allow COPY on a newly-created table to skip WAL logging
450a452,456
> On crash recovery, the table involved in the COPY would
> have its heap and index files truncated. One issue is
> that no other backend should be able to add to the table
> at the same time, which is something that is currently
> allowed.
> * Use UTF8 encoding for NLS messages so all server encodings can
> read them properly
< o %Add support for Unicode
<
< To fix this, the data needs to be converted to/from UTF16/UTF8
< so the Win32 wcscoll() can be used, and perhaps other functions
< like towupper(). However, UTF8 already works with normal
< locales but provides no ordering or character set classes.
< could only see committed rows from another transaction. However,
> could only see rows from another completed transaction. However,
981c981
< proper visibility of the row, for example, for cursors.
> proper visibility of the row's cmin, for example, for cursors.
