Injection points are a new facility that makes possible for developers
to run custom code in pre-defined code paths. Its goal is to provide
ways to design and run advanced tests, for cases like:
- Race conditions, where processes need to do actions in a controlled
ordered manner.
- Forcing a state, like an ERROR, FATAL or even PANIC for OOM, to force
recovery, etc.
- Arbitrary sleeps.
This implements some basics, and there are plans to extend it more in
the future depending on what's required. Hence, this commit adds a set
of routines in the backend that allows developers to attach, detach and
run injection points:
- A code path calling an injection point can be declared with the macro
INJECTION_POINT(name).
- InjectionPointAttach() and InjectionPointDetach() to respectively
attach and detach a callback to/from an injection point. An injection
point name is registered in a shmem hash table with a library name and a
function name, which will be used to load the callback attached to an
injection point when its code path is run.
Injection point names are just strings, so as an injection point can be
declared and run by out-of-core extensions and modules, with callbacks
defined in external libraries.
This facility is hidden behind a dedicated switch for ./configure and
meson, disabled by default.
Note that backends use a local cache to store callbacks already loaded,
cleaning up their cache if a callback has found to be removed on a
best-effort basis. This could be refined further but any tests but what
we have here was fine with the tests I've written while implementing
these backend APIs.
Author: Michael Paquier, with doc suggestions from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
Presently, the most straightforward way for a shared library to use
shared memory is to request it at server startup via a
shmem_request_hook, which requires specifying the library in
shared_preload_libraries. Alternatively, the library can create a
dynamic shared memory (DSM) segment, but absent a shared location
to store the segment's handle, other backends cannot use it. This
commit introduces a registry for DSM segments so that these other
backends can look up existing segments with a library-specified
string. This allows libraries to easily use shared memory without
needing to request it at server startup.
The registry is accessed via the new GetNamedDSMSegment() function.
This function handles allocating the segment and initializing it
via a provided callback. If another backend already created and
initialized the segment, it simply attaches the segment.
GetNamedDSMSegment() locks the registry appropriately to ensure
that only one backend initializes the segment and that all other
backends just attach it.
The registry itself is comprised of a dshash table that stores the
DSM segment handles keyed by a library-specified string.
Reviewed-by: Michael Paquier, Andrei Lepikhov, Nikita Malakhov, Robert Haas, Bharath Rupireddy, Zhang Mingli, Amul Sul
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
Presently, this section meanders through a few different features,
and the text itself is terse. This commit attempts to improve
matters by splitting the section into smaller sections and by
expanding the text for clarity. This is preparatory work for a
follow-up commit that will introduce a way for libraries to use
shared memory without needing to request it at startup time.
Reviewed-by: Aleksander Alekseev, Bharath Rupireddy, Abhijit Menon-Sen
Discussion: https://postgr.es/m/20240112041430.GA3557928%40nathanxps13
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
This is support function 12 for the GiST AM and translates
"well-known" RT*StrategyNumber values into whatever strategy number is
used by the opclass (since no particular numbers are actually
required). We will use this to support temporal PRIMARY
KEY/UNIQUE/FOREIGN KEY/FOR PORTION OF functionality.
This commit adds two implementations, one for internal GiST opclasses
(just an identity function) and another for btree_gist opclasses. It
updates btree_gist from 1.7 to 1.8, adding the support function for
all its opclasses.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This commit adds some notes about the inability to remove superuser
privileges from the bootstrap superuser. This has been blocked
since commit e530be2c5c, but it wasn't intended be a supported
feature before that, either.
In passing, change "bootstrap user" to "bootstrap superuser" in a
couple places.
Author: Yurii Rashkovskii
Reviewed-by: Vignesh C, David G. Johnston
Discussion: https://postgr.es/m/CA%2BRLCQzSx_eTC2Fch0EzeNHD3zFUcPvBYOoB%2BpPScFLch1DEQw%40mail.gmail.com
Currently, when source data contains unexpected data regarding data type or
range, the entire COPY fails. However, in some cases, such data can be ignored
and just copying normal data is preferable.
This commit adds a new option SAVE_ERROR_TO, which specifies where to save the
error information. When this option is specified, COPY skips soft errors and
continues copying.
Currently, SAVE_ERROR_TO only supports "none". This indicates error information
is not saved and COPY just skips the unexpected data and continues running.
Later works are expected to add more choices, such as 'log' and 'table'.
Author: Damir Belyalov, Atsushi Torikoshi, Alex Shulgin, Jian He
Discussion: https://postgr.es/m/87k31ftoe0.fsf_-_%40commandprompt.com
Reviewed-by: Pavel Stehule, Andres Freund, Tom Lane, Daniel Gustafsson,
Reviewed-by: Alena Rybakina, Andy Fan, Andrei Lepikhov, Masahiko Sawada
Reviewed-by: Vignesh C, Atsushi Torikoshi
Previously, identity columns were disallowed on partitioned tables.
(The reason was mainly that no one had gotten around to working
through all the details to make it work.) This makes it work now.
Some details on the behavior:
* A newly created partition inherits identity property
The partitions of a partitioned table are integral part of the
partitioned table. A partition inherits identity columns from the
partitioned table. An identity column of a partition shares the
identity space with the corresponding column of the partitioned
table. In other words, the same identity column across all
partitions of a partitioned table share the same identity space.
This is effected by sharing the same underlying sequence.
When INSERTing directly into a partition, the sequence associated
with the topmost partitioned table is used to calculate the value of
the corresponding identity column.
In regular inheritance, identity columns and their properties in a
child table are independent of those in its parent tables. A child
table does not inherit identity columns or their properties
automatically from the parent. (This is unchanged.)
* Attached partition inherits identity column
A table being attached as a partition inherits the identity property
from the partitioned table. This should be fine since we expect
that the partition table's column has the same type as the
partitioned table's corresponding column. If the table being
attached is a partitioned table, the identity properties are
propagated down its partition hierarchy.
An identity column in the partitioned table is also marked as NOT
NULL. The corresponding column in the partition needs to be marked
as NOT NULL for the attach to succeed.
* Drop identity property when detaching partition
A partition's identity column shares the identity space
(i.e. underlying sequence) as the corresponding column of the
partitioned table. If a partition is detached it can longer share
the identity space as before. Hence the identity columns of the
partition being detached loose their identity property.
When identity of a column of a regular table is dropped it retains
the NOT NULL constraint that came with the identity property.
Similarly the columns of the partition being detached retain the NOT
NULL constraints that came with identity property, even though the
identity property itself is lost.
The sequence associated with the identity property is linked to the
partitioned table (and not the partition being detached). That
sequence is not dropped as part of detach operation.
* Partitions with their own identity columns are not allowed.
* The usual ALTER operations (add identity column, add identity
property to existing column, alter properties of an indentity
column, drop identity property) are supported for partitioned
tables. Changing a column only in a partitioned table or a
partition is not allowed; the change needs to be applied to the
whole partition hierarchy.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CAExHW5uOykuTC+C6R1yDSp=o8Q83jr8xJdZxgPkxfZ1Ue5RRGg@mail.gmail.com
One instance of "WITH clause" was not using <literal> tags around
WITH, while others were, so add markup to the last one to ensure
consistency. Backpatch to v15 where MERGE was added.
Reported-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxGJKY9ZCPV2WDM6xFsXq9C8r7r3vU6AkScN+p9k6CEpMw@mail.gmail.com
Backpatch-through: v15
This seems to be missing since identity column support was added. Add
the same. This gives a place to document various pieces of
information in one place that are currently distributed over several
command reference pages or just not documented (e.g., inheritance
behavior).
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CAExHW5uOykuTC+C6R1yDSp=o8Q83jr8xJdZxgPkxfZ1Ue5RRGg@mail.gmail.com
This new function is equivalent to PQpipelineSync(), except that it does
not flush anything to the server except if the size threshold of the
output buffer is reached; the user must subsequently call PQflush()
instead.
Its purpose is to reduce the system call overhead of pipeline mode, by
giving to applications more control over the timing of the flushes when
manipulating commands in pipeline mode.
Author: Anton Kirilov
Reviewed-by: Jelte Fennema-Nio, Robert Haas, Álvaro Herrera, Denis
Laxalde, Michael Paquier
Discussion: https://postgr.es/m/CACV6eE5arHFZEA717=iKEa_OewpVFfWJOmsOdGrqqsr8CJVfWQ@mail.gmail.com
This changes the pg_attribute field attstattarget into a nullable
field in the variable-length part of the row. If no value is set by
the user for attstattarget, it is now null instead of previously -1.
This saves space in pg_attribute and tuple descriptors for most
practical scenarios. (ATTRIBUTE_FIXED_PART_SIZE is reduced from 108
to 104.) Also, null is the semantically more correct value.
The ANALYZE code internally continues to represent the default
statistics target by -1, so that that code can avoid having to deal
with null values. But that is now contained to the ANALYZE code.
Only the DDL code deals with attstattarget possibly null.
For system columns, the field is now always null. The ANALYZE code
skips system columns anyway.
To set a column's statistics target to the default value, the new
command form ALTER TABLE ... SET STATISTICS DEFAULT can be used. (SET
STATISTICS -1 still works.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/4da8d211-d54d-44b9-9847-f2a9f1184c76@eisentraut.org
A superuser may create a subscription with password_required=true, but
which uses a connection string without a password.
Previously, if the owner of such a subscription was changed to a
non-superuser, the non-superuser was able to utilize a password from
another source (like a password file or the PGPASSWORD environment
variable), which should not have been allowed.
This commit adds a step to re-validate the connection string before
connecting.
Reported-by: Jeff Davis
Author: Vignesh C
Reviewed-by: Peter Smith, Robert Haas, Amit Kapila
Discussion: https://www.postgresql.org/message-id/flat/e5892973ae2a80a1a3e0266806640dae3c428100.camel%40j-davis.com
Backpatch-through: 16
This can dump the contents of the WAL summary files found in
pg_wal/summaries. Normally, this shouldn't really be something anyone
needs to do, but it may be needed for debugging problems with
incremental backup, or could possibly be useful to external tools.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
This makes it possible to access information about the progress
of WAL summarization from SQL. The previously-added functions
pg_available_wal_summaries() and pg_wal_summary_contents() only
examine on-disk state, but this function exposes information from
the server's shared memory.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
UNIQUE and PRIMARY KEY constraints can be created on ONLY the
partitioned table. We already had an example demonstrating that,
but forgot to mention it in the documentation of the limits of
partitioning.
Author: Laurenz Albe
Reviewed-By: shihao zhong, Shubham Khanna, Ashutosh Bapat
Backpatch-through: 12
Discussion: https://postgr.es/m/167299368731.659.16130012959616771853@wrigleys.postgresql.org
The documentation for this parameter lists its type as boolean, but
it is actually an integer. Furthermore, there is no mention of how
the value is interpreted when specified without units. This commit
fixes these oversights in commit 174c480508.
Co-authored-by: Hubert Depesz Lubaczewski
Discussion: https://postgr.es/m/ZZwkujFihO2uqKwp%40depesz.com
Essentially this moves the non-interactive part of psql's "\password"
command into an exported client function. The password is not sent to the
server in cleartext because it is "encrypted" (in the case of scram and md5
it is actually hashed, but we have called these encrypted passwords for a
long time now) on the client side. This is good because it ensures the
cleartext password is never known by the server, and therefore won't end up
in logs, pg_stat displays, etc.
In other words, it exists for the same reason as PQencryptPasswordConn(), but
is more convenient as it both builds and runs the "ALTER USER" command for
you. PQchangePassword() uses PQencryptPasswordConn() to do the password
encryption. PQencryptPasswordConn() is passed a NULL for the algorithm
argument, hence encryption is done according to the server's
password_encryption setting.
Also modify the psql client to use the new function. That provides a builtin
test case. Ultimately drivers built on top of libpq should expose this
function and its use should be generally encouraged over doing ALTER USER
directly for password changes.
Author: Joe Conway
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/flat/b75955f7-e8cc-4bbd-817f-ef536bacbe93%40joeconway.com
The note regarding character encoding form in "The Information Schema"
said that LATIN1 character repertoires only use one encoding form
LATIN1. This is not correct because LATIN1 has another encoding form
ISO-2022-JP-2. To fix this, replace LATIN1 with LATIN2, which is not
supported by ISO-2022-JP-2, thus it can be said that LATIN2 only uses
one encoding form.
Back-patch to supported branches.
Author: Tatsuo Ishii
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/flat/20240102.153925.1147403616414525145.t-ishii%40sranhm.sra.co.jp
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these. Use them in postgres_fdw,
replacing a local implementation from which the libpqsrv implementation
derives. This is a bug fix for dblink. Code inspection identified the
bug at least thirteen years ago, but user complaints have not appeared.
Hence, no back-patch for now.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
This adds a new ALTER TABLE subcommand ALTER COLUMN ... SET EXPRESSION
that changes the generation expression of a generated column.
The syntax is not standard but was adapted from other SQL
implementations.
This command causes a table rewrite, using the usual ALTER TABLE
mechanisms. The implementation is similar to and makes use of some of
the infrastructure of the SET DATA TYPE subcommand (for example,
rebuilding constraints and indexes afterwards). The new command
requires a new pass in AlterTablePass, and the ADD COLUMN pass had to
be moved earlier so that combinations of ADD COLUMN and SET EXPRESSION
can work.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b94yyJeGA-5M951_Lr+KfZokOp-2kXicpmEhi5FXhBeTog@mail.gmail.com
This patch changes the existing 'conflicting' field to 'conflict_reason'
in pg_replication_slots. This new field indicates the reason for the
logical slot's conflict with recovery. It is always NULL for physical
slots, as well as for logical slots which are not invalidated. The
non-NULL values indicate that the slot is marked as invalidated. Possible
values are:
wal_removed = required WAL has been removed.
rows_removed = required rows have been removed.
wal_level_insufficient = the primary doesn't have a wal_level sufficient
to perform logical decoding.
The existing users of 'conflicting' column can get the same answer by
using 'conflict_reason' IS NOT NULL.
Author: Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/ZYOE8IguqTbp-seF@paquier.xyz
The "vertexes" spelling is also valid, but we consistently use
"vertices" elsewhere.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Shubham Khanna
Discussion: https://postgr.es/m/87le9fmi01.fsf@wibble.ilmari.org
This reverts commit 283a95da923605c1cc148155db2d865d0801b419.
The reordering of JsonPathItemType affects the binary on-disk
compatibility of the jsonpath type, so we must not change it. Revert
for now and consider.
This feature will allow us to replicate the changes on subscriber nodes
after the upgrade.
Previously, only the subscription metadata information was preserved.
Without the list of relations and their state, it's not possible to
re-enable the subscriptions without missing some records as the list of
relations can only be refreshed after enabling the subscription (and
therefore starting the apply worker). Even if we added a way to refresh
the subscription while enabling a publication, we still wouldn't know
which relations are new on the publication side, and therefore should be
fully synced, and which shouldn't.
To preserve the subscription relations, this patch teaches pg_dump to
restore the content of pg_subscription_rel from the old cluster by using
binary_upgrade_add_sub_rel_state SQL function. This is supported only
in binary upgrade mode.
The subscription's replication origin is needed to ensure that we don't
replicate anything twice.
To preserve the replication origins, this patch teaches pg_dump to update
the replication origin along with creating a subscription by using
binary_upgrade_replorigin_advance SQL function to restore the
underlying replication origin remote LSN. This is supported only in
binary upgrade mode.
pg_upgrade will check that all the subscription relations are in 'i'
(init) or in 'r' (ready) state and will error out if that's not the case,
logging the reason for the failure. This helps to avoid the risk of any
dangling slot or origin after the upgrade.
Author: Vignesh C, Julien Rouhaud, Shlok Kyal
Reviewed-by: Peter Smith, Masahiko Sawada, Michael Paquier, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/20230217075433.u5mjly4d5cr4hcfe@jrouhaud
When enabled (default off), this logs a backtrace anytime elog() or an
equivalent ereport() for internal errors is called.
This is not well covered by the existing backtrace_functions, because
there are many equally-worded low-level errors in many functions. And
if you find out where the error is, then you need to manually rewrite
the elog() to ereport() to attach the errbacktrace(), which is
annoying. Having a backtrace automatically on every elog() call could
be very helpful during development for various kinds of common errors
from palloc, syscache, node support, etc.
Discussion: https://www.postgresql.org/message-id/flat/ba76c6bc-f03f-4285-bf16-47759cfcab9e@eisentraut.org
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
The documentation has been missing one value in the list of catalog OIDs
that can be given to the validator function of a FDW, as of
AttributeRelationId, when changing the attribute options of a foreign
table.
Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=i16t2yJU_Pq2Z+hnNGWFhagp_bJmzxHZu3ZkOjZm-+rQ@mail.gmail.com
Backpatch-through: 12
Bhis commit introduces enhancements to the pg_stat_checkpointer view by adding
three new columns: restartpoints_timed, restartpoints_req, and
restartpoints_done. These additions aim to improve the visibility and
monitoring of restartpoint processes on replicas.
Previously, it was challenging to differentiate between successful and failed
restartpoint requests. This limitation arises because restartpoints on replicas
are dependent on checkpoint records from the primary, and cannot occur more
frequently than these checkpoints.
The new columns allow for clear distinction and tracking of restartpoint
requests, their triggers, and successful completions. This enhancement aids
database administrators and developers in better understanding and diagnosing
issues related to restartpoint behavior, particularly in scenarios where
restartpoint requests may fail.
System catalog is changed. Catversion is bumped.
Discussion: https://postgr.es/m/99b2ccd1-a77a-962a-0837-191cdf56c2b9%40inbox.ru
Author: Anton A. Melnikov
Reviewed-by: Kyotaro Horiguchi, Alexander Korotkov
Up to now, our distribution tarballs have included a plain-text form
of the installation.sgml chapter. The rationale for that was that a
recipient might not have either ready internet access or HTML-viewing
tools; a theory that seems downright quaint today. Maintaining the
ability to generate this file is not without cost, because it puts
special requirements on installation.sgml that are often overlooked.
Moreover, we are moving in the direction of making our distribution
tarballs be pure git snapshots for traceability/reproducibility
reasons; including generated files doesn't fit into that plan.
Hence, let's just drop INSTALL and remove the infrastructure for
generating it. The top-level README will now recommend visiting
our website to see the installation instructions. As a useful
side-effect, we can get rid of README.git which has provoked
confusion.
Discussion: https://postgr.es/m/20231220114927.faccqqprmuyrzdip@alap3.anarazel.de
Discussion: https://postgr.es/m/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
