Commit f8e5f156b added private state in postgres.c to track whether
a statement timeout is running. This seems like bad design to me;
timeout.c's private state should be the single source of truth about
that. We already fixed one bug associated with failure to keep those
states in sync (cf. be42015fc), and I've got little faith that we
won't find more in future. So get rid of postgres.c's local variable
by exposing a way to ask timeout.c whether a timeout is running.
(Obviously, such an inquiry is subject to race conditions, but it
seems fine for the purpose at hand.)
To make get_timeout_active() as cheap as possible, add a flag in
the per-timeout struct showing whether that timeout is active.
This allows some small savings elsewhere in timeout.c, mainly
elimination of unnecessary searches of the active_timeouts array.
While at it, fix enable_statement_timeout to not call disable_timeout
when statement_timeout is 0 and the timeout is not running. This
avoids a useless deschedule-and-reschedule-timeouts cycle, which
represents a significant savings (at least one kernel call) when
there is any other active timeout. Right now, there usually isn't,
but there are proposals around to change that.
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
Historically, we started the timer (if StatementTimeout > 0) at the
beginning of a simple-Query message and usually let it run until the
end, so that the timeout limit applied to the entire query string,
and intra-string changes of the statement_timeout GUC had no effect.
But, confusingly, a COMMIT within the string would reset the state
and allow a fresh timeout cycle to start with the current setting.
Commit f8e5f156b changed the behavior of statement_timeout for extended
query protocol, and as an apparently-unintended side effect, a change in
the statement_timeout GUC during a multi-statement simple-Query message
might have an effect immediately --- but only if it was going from
"disabled" to "enabled".
This is all pretty confusing, not to mention completely undocumented.
Let's change things so that the timeout is always reset between queries
of a multi-query string, whether they're transaction control commands
or not. Thus the active timeout setting is applied to each query in
the string, separately. This costs a few more cycles if statement_timeout
is active, but it provides much more intuitive behavior, especially if one
changes statement_timeout in one of the queries of the string.
Also, add something to the documentation to explain all this.
Per bug #16035 from Raj Mohite. Although this is a bug fix, I'm hesitant
to back-patch it; conceivably somebody has worked out the old behavior
and is depending on it. (But note that this change should make the
behavior less restrictive in most cases, since the timeout will now
be applied to shorter segments of code.)
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
The commit dddf4cdc3 tries to ensure that the Postgres header file
inclusions are in order based on their ASCII value. However, in one of
the case there is a header file dependency due to which we can't maintain
such order.
Author: Amit Kapila
Discussion: https://postgr.es/m/E1iNpHW-000855-1u@gemulon.postgresql.org
Phases 2 (building the new index) and 3 (validating the new index)
checked for interrupts outside a transaction context, having as
consequence to not release session-level locks taken on the parent
relation and the old and new indexes processed. This could for example
be triggered with statement_timeout and a bad timing, and would issue
confusing error messages when shutting down the session still holding
the locks (note that an assertion failure would be triggered first), on
top of more issues with concurrent sessions trying to take a lock that
would interfere with the SHARE UPDATE EXCLUSIVE locks hold here.
This moves all the interruption checks inside a transaction context.
Note that I have manually tested all interruptions to make sure that
invalid indexes can be cleaned up properly. Partition indexes still
have issues on their own with some missing dependency handling, which
will be dealt with in a follow-up patch.
Reported-by: Justin Pryzby
Author: Michael Paquier
Discussion: https://postgr.es/m/20191013025145.GC4475@telsasoft.com
Backpatch-through: 12
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
Commit a524f50d0f added
old_11_check_for_sql_identifier_data_type_usage(), but it did not use
the clearer database error list format added to the master branch in
commit 1634d36157. This commit fixes that.
Backpatch-through: master
In the first transaction run for REINDEX CONCURRENTLY, a thinko in the
existing logic caused two session locks to be taken on the old index,
causing the session lock on the newly-created index to be missed. This
made possible concurrent DDL commands (like ALTER INDEX) on the new
index while REINDEX CONCURRENTLY was processing from the point where the
first internal transaction committed.
This issue has been discovered while digging into another bug.
Author: Michael Paquier
Discussion: https://postgr.es/m/20191021074323.GB1869@paquier.xyz
Backpatch-through: 12
8ae0d47 marked those options as obsolete back in 2005, with the options
removed from the documentation. This removes the last references to
both options in the code which were kept around for compatibility
purposes with past commands.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/5da284a2-62d9-e338-88d1-26ee5009d93e@gmail.com
A check was redundant. While on it, add an assertion to make sure that
the parsing routine is never called with a NULL input. All the code
paths currently calling the parsing routine are careful with NULL inputs
already, but future callers may forget that.
Reported-by: Peter Eisentraut, Lars Kanis
Discussion: https://postgr.es/m/ec64956b-4597-56b6-c3db-457d15250fe4@2ndquadrant.com
Backpatch-through: 12
Any callback set would have no meaning in the context of an exception.
As an autovacuum worker exits quickly in this context, this could be
only an issue within EmitErrorReport(), where the elog hook is for
example called. That's unlikely to going to be a problem, but let's be
clean and consistent with other code paths handling exceptions. This is
present since 2909419, which introduced autovacuum.
Author: Ashwin Agrawal
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALfoeisM+_+dgmAdAOHAu0k-ZpEHHqSSG=GRf3pKJGm8OqWX0w@mail.gmail.com
Backpatch-through: 9.4
While casting from timestamp to timestamptz we do timestamp2tm() then
tm2timestamp(). This commit eliminates call to tm2timestamp(). Instead, it
directly applies timezone offset to the original timestamp value. That makes
upcoming datetime overflow handling in jsonpath easier. That should also save
us some CPU cycles.
Discussion: https://postgr.es/m/CAPpHfdvRPRh_mTGar5WmDeRZ%3DU5dOXHdxspYYD%3D76m3knNGjXA%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
It emerges that recent versions of Windows (at least 2016 Standard)
spell this locale name as "Norwegian Bokmål_Norway.1252", defeating
our mapping code that translates "Norwegian (Bokmål)_Norway" to
something that's all-ASCII (cf commits db29620d4 and aa1d2fc5e).
Add another mapping entry to handle this spelling.
Per bug #16068 from Robert Ford. Like the previous patches,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16068-4cb6eeaa7eb46d93@postgresql.org
On recent Red Hat platforms (at least RHEL 8 and Fedora 30, maybe older),
configure's probe for libperl failed if the user forces CFLAGS to be -O0.
This is because some code in perl's inline.h fails to be optimized away
at -O0, and said code doesn't work if compiled without -fPIC.
To fix, add CFLAGS_SL to the compile flags used during the libperl probe.
This is a better simulation of the way that plperl is built, anyway,
so it might forestall other issues in future.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
since people might want to build older branches on these platforms.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
Move the platform-dependent logic that sets CFLAGS_SL from
src/makefiles/Makefile.foo to src/template/foo, so that the value
is determined at configure time and thus is available while running
configure's tests.
On a couple of platforms this might save a few microseconds of build
time by eliminating a test that make otherwise has to do over and over.
Otherwise it's pretty much a wash for build purposes; in particular,
this makes no difference to anyone who might be overriding CFLAGS_SL
via a make option.
This patch in itself does nothing with the value and thus should not
change any behavior, though you'll probably have to re-run configure
to get a correctly updated Makefile.global. We'll use the new
configure variable in a follow-on patch.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
because the follow-on patch is a portability bug fix.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
We memorize all internal and empty leaf pages in the 1st vacuum stage for
gist indexes. They are used in the 2nd stage, to delete all the empty
pages. There was a memory context page_set_context for this purpose, but
we never used it.
Reported-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 12, where it got introduced
Discussion: https://postgr.es/m/CAA4eK1LGr+MN0xHZpJ2dfS8QNQ1a_aROKowZB+MPNep8FVtwAA@mail.gmail.com
The logic was correctly detecting a parsing failure, but the parsing
error did not get reported back to the client properly.
Reported-by: Ed Morley
Author: Lars Kanis
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
Commit e7a2217 has introduced stricter checks for integer values in
connection parameters for libpq. However this failed to correctly check
after trailing whitespaces, while leading whitespaces were discarded per
the use of strtol(3). This fixes and refactors the parsing logic to
handle both cases consistently. Note that trying to restrict the use of
trailing whitespaces can easily break connection strings like in ECPG
regression tests (these have allowed me to catch the parsing bug with
connect_timeout).
Author: Michael Paquier
Reviewed-by: Lars Kanis
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
There were some leftovers from ancient ad-hoc ways to build on
Windows, prior to the standardization on MSVC and MinGW. We don't
need to build a lib$(NAME)ddll.def (debug build, as opposed to
lib$(NAME)dll.def) for MinGW, since nothing uses that. We also don't
need to build the regular .def file during distprep, since the MinGW
build environment is perfectly capable of creating that normally at
build time.
Discussion: https://www.postgresql.org/message-id/flat/0f9db9f8-47b8-a48b-6ccc-15b22b412316%402ndquadrant.com
Without "b", a variant of the tas() code miscompiles on macOS 10.4.
This may also fix a compilation failure involving macOS 10.1. Today's
compilers have been allocating acceptable registers with or without this
change, but this future-proofs the code by precisely conveying the
acceptable registers. Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20191009063900.GA4066266@rfd.leadboat.com
Since pluggable storage has been introduced, those two routines have
been replaced by table_open/close, with some compatibility macros still
present to allow extensions to compile correctly with v12.
Some code paths using the old routines still remained, so replace them.
Based on the discussion done, the consensus reached is that it is better
to remove those compatibility macros so as nothing new uses the old
routines, so remove also the compatibility macros.
Discussion: https://postgr.es/m/20191017014706.GF5605@paquier.xyz
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
Apparently while this code was being developed,
ReindexRelationConcurrently operated on multiple relations. The version
that was ultimately pushed doesn't, so this comment's use of plural is
inaccurate.
The timestamp tracking the last moment a message is received in a
logical replication worker was initialized in each loop checking if a
message was received or not, causing wal_receiver_timeout to be ignored
in basically any logical replication deployments. This also broke the
ping sent to the server when reaching half of wal_receiver_timeout.
This simply moves the initialization of the timestamp out of the apply
loop to the beginning of LogicalRepApplyLoop().
Reported-by: Jehan-Guillaume De Rorthais
Author: Julien Rouhaud
Discussion: https://postgr.es/m/CAOBaU_ZHESFcWva8jLjtZdCLspMj7vqaB2k++rjHLY897ZxbYw@mail.gmail.com
Backpatch-through: 10
Logical walsender should exit when it catches up with sending WAL during
shutdown; but there was a rare corner case when it failed to because of
a race condition that puts it back to wait for more WAL instead -- but
since there wasn't any, it'd not shut down immediately. It would only
continue the shutdown when wal_sender_timeout terminates the sleep,
which causes annoying waits during shutdown procedure. Restructure the
code so that we no longer forget to set WalSndCaughtUp in that case.
This was an oversight in commit c6c333436.
Backpatch all the way down to 9.4.
Author: Craig Ringer, Álvaro Herrera
Discussion: https://postgr.es/m/CAMsr+YEuz4XwZX_QmnX_-2530XhyAmnK=zCmicEnq1vLr0aZ-g@mail.gmail.com
When an FK constraint is created, it needs the index on the referenced
table to exist and be valid. When doing parallel pg_restore and the
referenced table was partitioned, this condition can sometimes not be
met, because pg_dump didn't emit sufficient object dependencies to
ensure so; this means that parallel pg_restore would fail in certain
conditions. Fix by having pg_dump make the FK constraint object
dependent on the partition attachment objects for the constraint's
referenced index.
This has been broken since f56f8f8da6, so backpatch to Postgres 12.
Discussion: https://postgr.es/m/20191005224333.GA9738@alvherre.pgsql
Otherwise it can be hard to see where an error is coming from, when
the parallel worker sets all the GUCs that it received from the
leader. Bug #15726. Back-patch to 9.5, where RestoreGUCState()
appeared.
Reported-by: Tiago Anastacio
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/15726-6d67e4fa14f027b3%40postgresql.org
Commits 801c2dc7 and 801c2dc7 made it possible for vacuum to
try to freeze a multixact that is still running. That was
prevented by a check, but raised an error. Repair.
Back-patch all the way.
Author: Nathan Bossart, Jeremy Schneider
Reported-by: Jeremy Schneider
Reviewed-by: Jim Nasby, Thomas Munro
Discussion: https://postgr.es/m/DAFB8AFF-2F05-4E33-AD7F-FF8B0F760C17%40amazon.com
A race condition can make us try to dereference a NULL pointer to the
PGPROC struct of a process that's already finished. That results in
crashes during REINDEX CONCURRENTLY and CREATE INDEX CONCURRENTLY.
This was introduced in ab0dfc961b, so backpatch to pg12.
Reported by: Justin Pryzby
Reviewed-by: Michaël Paquier
Discussion: https://postgr.es/m/20191012004446.GT10470@telsasoft.com
The pg_upgrade check for pg_catalog.unknown type when upgrading from 9.6
had a couple of issues with domains and composite types - it detected
even composite types unused in objects with storage. So for example this
was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE unknown_composite AS (u pg_catalog.unknown)
On the other hand, this only happened with composite types directly on
the pg_catalog.unknown data type, but not with a domain. So this was not
detected
CREATE DOMAIN unknown_domain AS pg_catalog.unknown;
CREATE TYPE unknown_composite_2 AS (u unknown_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.unknown type through a domain. So we missed cases like this
CREATE TABLE t (u unknown_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. Backpatch all
the way to 10, where the of pg_catalog.unknown data type was restricted.
Author: Tomas Vondra
Backpatch-to: 10-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
The pg_upgrade check for pg_catalog.line data type when upgrading from
9.3 had a couple of issues with domains and composite types. Firstly, it
triggered false positives for composite types unused in objects with
storage. This was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE line_composite AS (l pg_catalog.line)
On the other hand, this only happened with composite types directly on
the pg_catalog.line data type, but not with a domain. So this was not
detected
CREATE DOMAIN line_domain AS pg_catalog.line;
CREATE TYPE line_composite_2 AS (l line_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.line data type through a domain. So we missed cases like this
CREATE TABLE t (l line_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. 9.3 did not
support domains on composite types, but we can still have multi-level
composite types.
Backpatch all the way to 9.4, where the format for pg_catalog.line data
type changed.
Author: Tomas Vondra
Backpatch-to: 9.4-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
The test in 93765bd956 added an event trigger to ensure that the
tested table rewrites do not get optimized away (as happened in the
past). But doing so would require running the tests in isolation, as
otherwise the trigger might also fire in concurrent sessions, causing
test failures there.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/3328.1570740683@sss.pgh.pa.us
Backpatch: 12, just as 93765bd956
Using glibc's version string to detect potential collation definition
changes is not 100% reliable, but it's better than nothing. Currently
this affects only collations explicitly provided by "libc". More work
will be needed to handle the default collation.
Author: Thomas Munro, based on a suggestion from Christoph Berg
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/4b76c6d4-ae5e-0dc6-7d0d-b5c796a07e34%402ndquadrant.com
This fixes multiple areas of the documentation:
- COPY for its past compatibility section.
- SET ROLE mentioning INHERITS instead of INHERIT
- PREPARE referring to stmt_name, that is not present.
- Extension documentation about format name with upgrade scripts.
Backpatch down to 9.4 for the relevant parts.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/bf95233a-9943-b341-e2ff-a860c28af481@gmail.com
Backpatch-through: 9.4
Since the introduction of different slot types, in 1a0586de36, we
create a virtual slot in tuplesort_begin_cluster(). While that looks
right, it unfortunately doesn't actually work, as ExecStoreHeapTuple()
is used to store tuples in the slot. Unfortunately no regression tests
for CLUSTER on expression indexes existed so far.
Fix the slot type, and add bare bones tests for CLUSTER on expression
indexes.
Reported-By: Justin Pryzby
Author: Andres Freund
Discussion: https://postgr.es/m/20191011210320.GS10470@telsasoft.com
Backpatch: 12, like 1a0586de36
Tom Lane