Also, rename it to plan_union_chidren, so the old name wasn't
very descriptive. This results in a small net reduction in code,
seems at least to me to be easier to understand, and saves
space on the process stack.
Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar
Raghuwanshi.
Discussion: http://postgr.es/m/CA+TgmoaLRAOqHmMZx=ESM3VDEPceg+-XXZsRXQ8GtFJO_zbMSw@mail.gmail.com
If a view lacks an INSTEAD OF trigger, DML on it can only work by rewriting
the command into a command on the underlying base table(s). Then we will
fire triggers attached to those table(s), not those for the view. This
seems appropriate from a consistency standpoint, but nowhere was the
behavior explicitly documented, so let's do that.
There was some discussion of throwing an error or warning if a statement
trigger is created on a view without creating a row INSTEAD OF trigger.
But a simple implementation of that would result in dump/restore ordering
hazards. Given that it's been like this all along, and we hadn't heard
a complaint till now, a documentation improvement seems sufficient.
Per bug #15106 from Pu Qun. Back-patch to all supported branches.
Discussion: https://postgr.es/m/152083391168.1215.16892140713507052796@wrigleys.postgresql.org
In e170b8c8, protection against modified search_path was added. However,
PostgreSQL versions prior to 10 does not accept SQL commands over a
replication connection, so the protection would generate a syntax error.
Since we cannot run SQL commands on it, we are also not vulnerable to
the issue that e170b8c8 fixes, so we can just skip this command for
older versions.
Author: Michael Paquier <michael@paquier.xyz>
The test to exit the loop if the integer control value would overflow
an int32 turns out not to work on some ICC versions, as it's dependent
on the assumption that the compiler will execute the code as written
rather than "optimize" it. ICC lacks any equivalent of gcc's -fwrapv
switch, so it was optimizing on the assumption of no integer overflow,
and that breaks this. Rewrite into a form that in fact does not
do any overflowing computations.
Per Tomas Vondra and buildfarm member fulmar. It's been like this
for a long time, although it was not till we added a regression test
case covering the behavior (in commit dd2243f2a) that the problem
became apparent. Back-patch to all supported versions.
Discussion: https://postgr.es/m/50562fdc-0876-9843-c883-15b8566c7511@2ndquadrant.com
"UPDATE/DELETE WHERE CURRENT OF cursor_name" failed, with an error message
like "cannot extract system attribute from virtual tuple", if the cursor
was using a index-only scan for the target table. Fix it by digging the
current TID out of the indexscan state.
It seems likely that the same failure could occur for CustomScan plans
and perhaps some FDW plan types, so that leaving this to be treated as an
internal error with an obscure message isn't as good an idea as it first
seemed. Hence, add a bit of heaptuple.c infrastructure to let us deliver
a more on-topic message. I chose to make the message match what you get
for the case where execCurrentOf can't identify the target scan node at
all, "cursor "foo" is not a simply updatable scan of table "bar"".
Perhaps it should be different, but we can always adjust that later.
In the future, it might be nice to provide hooks that would let custom
scan providers and/or FDWs deal with this in other ways; but that's
not a suitable topic for a back-patchable bug fix.
It's been like this all along, so back-patch to all supported branches.
Yugo Nagata and Tom Lane
Discussion: https://postgr.es/m/20180201013349.937dfc5f.nagata@sraoss.co.jp
Since SSL compression is no longer recommended, turn the default in
libpq from on to off.
OpenSSL 1.1.0 and many distribution packages already turn compression
off by default, so such a server won't accept compression anyway. So
this will mainly affect users of older OpenSSL installations.
Also update the documentation to make clear that this setting is no
longer recommended.
Discussion: https://www.postgresql.org/message-id/flat/595cf3b1-4ffe-7f05-6f72-f72b7afa7993%402ndquadrant.com
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This allows to deduplicate some existing code, but mainly avoids some
duplication in upcoming commits.
In passing, fix variable names indicating wrong unit (seconds instead
of ms).
Author: Andres Freund
Discussion: https://postgr.es/m/20180314002740.cah3mdsonz5mxney@alap3.anarazel.de
'long' is not useful type across platforms, as it's 32bit on 32 bit
platforms, and even on some 64bit platforms (e.g. windows) it's still
only 32bits wide.
As ExplainPropertyInteger should never be performance critical, change
it to accept a 64bit argument and remove ExplainPropertyLong.
Author: Andres Freund
Discussion: https://postgr.es/m/20180314164832.n56wt7zcbpzi6zxe@alap3.anarazel.de
ExecHashTableCreate allocated some memory that wasn't freed by
ExecHashTableDestroy, specifically the per-hash-key function information.
That's not a huge amount of data, but if one runs a query that repeats
a hash join enough times, it builds up. Fix by arranging for the data
in question to be kept in the hashtable's hashCxt instead of leaving it
"loose" in the query-lifespan executor context. (This ensures that we'll
also clean up anything that the hash functions allocate in fn_mcxt.)
Per report from Amit Khandekar. It's been like this forever, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAJ3gD9cFofAWGvcxLOxDHC=B0hjtW8yGmUsF2hdGh97CM38=7g@mail.gmail.com
In some cases, these were different for no apparent reason, making
debugging unnecessarily mysterious.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Instead of embedding the savepoint name in a list and then requiring
complex code to unpack it, just add another struct field to store it
directly.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Part of the intent in commit fd1a421fe was to allow SQL functions that are
declared to return VOID to contain anything, including an unrelated final
SELECT, the same as SQL-language procedures can. However, the planner's
inlining logic didn't get that memo. Fix it, and add some regression tests
covering this area, since evidently we had none.
In passing, clean up some typos in comments in create_function_3.sql,
and get rid of its none-too-safe assumption that DROP CASCADE notice
output is immutably ordered.
Per report from Prabhat Sahu.
Discussion: https://postgr.es/m/CANEvxPqxAj6nNHVcaXxpTeEFPmh24Whu+23emgjiuKrhJSct0A@mail.gmail.com
Commit 3b7ab4380 added some tests that require ecpg to be given the
new "-C ORACLE" switch. Teach the MSVC build infrastructure about
that.
Michael Paquier
Discussion: https://postgr.es/m/8299.1521154647@sss.pgh.pa.us
Many of the objects we create during the regression tests are put in the
public schema, so that using the same names in different regression tests
creates a hazard of test failures if any two such scripts run concurrently.
This patch cleans up a bunch of latent hazards of that sort, as well as two
live hazards.
The current situation in this regard is far worse than it was a year or two
back, because practically all of the partitioning-related test cases have
reused table names with enthusiasm. I despaired of cleaning up that mess
within the five most-affected tests (create_table, alter_table, insert,
update, inherit); fortunately those don't run concurrently.
Other than partitioning problems, most of the issues boil down to using
names like "foo", "bar", "tmp", etc, without thought for the fact that
other test scripts might use similar names concurrently. I've made an
effort to make all such names more specific.
One of the live hazards was that commit 7421f4b8 caused with.sql to
create a table named "test", conflicting with a similarly-named table
in alter_table.sql; this was exposed in the buildfarm recently.
The other one was that join.sql and transactions.sql both create tables
named "foo" and "bar"; but join.sql's uses of those names date back
only to December or so.
Since commit 7421f4b8 was back-patched to v10, back-patch a minimal
fix for that problem. The rest of this is just future-proofing.
Discussion: https://postgr.es/m/4627.1521070268@sss.pgh.pa.us
There's no functional change here, or at least I hope there isn't,
just code rearrangement. The rearrangement is motivated by
partition-wise aggregate, which doesn't need to consider the
degenerate case but wants to reuse the logic for the ordinary case.
Based loosely on a patch from Ashutosh Bapat and Jeevan Chalke, but I
whacked it around pretty heavily. The larger patch series of which
this patch is a part was also reviewed and tested by Antonin Houska,
Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik,
Pascal Legrand, Rafia Sabih, and me.
Discussion: http://postgr.es/m/CAFjFpRewpqCmVkwvq6qrRjmbMDpN0CZvRRzjd8UvncczA3Oz1Q@mail.gmail.com
Since these names are global, using the same ones in different regression
tests creates a hazard of test failures if any two such scripts run
concurrently. Let's establish a policy of not doing that. In the cases
where a conflict existed, I chose to rename both sides: in principle one
script or the other could've been left in possession of the common name,
but that seems to just invite more trouble of the same sort.
There are a number of places where scripts are using names that seem
unduly generic, but in the absence of actual conflicts I left them alone.
In addition, fix insert.sql's use of "someone_else" as a role name.
That's a flat out violation of longstanding project policy, so back-patch
that change to v10 where the usage appeared. The rest of this is just
future-proofing, as no two of these scripts are actually run concurrently
in the existing parallel_schedule.
Conflicts of schema-qualified names also exist, but will be dealt with
separately.
Discussion: https://postgr.es/m/4627.1521070268@sss.pgh.pa.us
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a1577563f53f2171689d4f890a46881, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
get_number_of_groups() and make_partial_grouping_target() currently
fish information directly out of the PlannerInfo; in the former case,
the target list, and in the latter case, the HAVING qual. This works
fine if there's only one grouping relation, but if the pending patch
for partition-wise aggregate gets committed, we'll have multiple
grouping relations and must therefore use appropriately translated
versions of these values for each one. To make that simpler, pass the
values to be used as arguments.
Jeevan Chalke. The larger patch series of which this patch is a part
was also reviewed and tested by Antonin Houska, Rajkumar Raghuwanshi,
David Rowley, Dilip Kumar, Konstantin Knizhnik, Pascal Legrand, Rafia
Sabih, and me.
Discussion: http://postgr.es/m/CAM2+6=UqFnFUypOvLdm5TgC+2M=-E0Q7_LOh0VDFFzmk2BBPzQ@mail.gmail.com
Discussion: http://postgr.es/m/CAM2+6=W+L=C4yBqMrgrfTfNtbtmr4T53-hZhwbA2kvbZ9VMrrw@mail.gmail.com
The logical replication type map seems to have been misused by its only
caller -- it would try to use the remote OID as input for local type
routines, which unsurprisingly could result in bogus "cache lookup
failed for type XYZ" errors, or random other type names being picked up
if they happened to use the right OID. Fix that, changing
Oid logicalrep_typmap_getid(Oid remoteid) to
char *logicalrep_typmap_gettypname(Oid remoteid)
which is more useful. If the remote type is not part of the typmap,
this simply prints "unrecognized type" instead of choking trying to
figure out -- a pointless exercise (because the only input for that
comes from replication messages, which are not under the local node's
control) and dangerous to boot, when called from within an error context
callback.
Once that is done, it comes to light that the local OID in the typmap
entry was not being used for anything; the type/schema names are what we
need, so remove local type OID from that struct.
Once you do that, it becomes pointless to attach a callback to regular
syscache invalidation. So remove that also.
Reported-by: Dang Minh Huong
Author: Masahiko Sawada
Reviewed-by: Álvaro Herrera, Petr Jelínek, Dang Minh Huong, Atsushi Torikoshi
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6BE964@BPXM05GP.gisp.nec.co.jp
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6C4B0A@BPXM05GP.gisp.nec.co.jp
In b5635948ab1, a couple of function header comments weren't changed, or
weren't changed correctly, to reflect the arguments being passed into
the functions. Specifically, get_number_of_groups() had the wrong
argument name in the commit and create_grouping_paths() wasn't
updated even though the arguments had been changed.
The issue with create_grouping_paths() was noticed by Ashutosh Bapat,
while I discovered the issue with get_number_of_groups() by looking to
see if there were any similar issues from that commit.
Discussion: https://postgr.es/m/CAFjFpRcbp4702jcp387PExt3fNCt62QJN8++DQGwBhsW6wRHWA@mail.gmail.com
In a top-level CALL, the values of INOUT arguments will be returned as a
result row. In PL/pgSQL, the values are assigned back to the input
arguments. In other languages, the same convention as for return a
record from a function is used. That does not require any code changes
in the PL implementations.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Autovacuum's 'workitem' request queue is of limited size, so requests
can fail if they arrive more quickly than autovacuum can process them.
Emit a log message when this happens, to provide better visibility of
this.
Backpatch to 10. While this represents an API change for
AutoVacuumRequestWork, that function is not yet prepared to deal with
external modules calling it, so there doesn't seem to be any risk (other
than log spam, that is.)
Author: Masahiko Sawada
Reviewed-by: Fabrízio Mello, Ildar Musin, Álvaro Herrera
Discussion: https://postgr.es/m/CAD21AoB1HrQhp6_4rTyHN5kWEJCEsG8YzsjZNt-ctoXSn5Uisw@mail.gmail.com
In some cases Oracle Pro*C handles char array differently than ECPG. This patch
adds a Oracle compatibility mode to make ECPG behave like Pro*C.
Patch by David Rader <davidr@openscg.com>
Previously there were no tests verifying that NULL handling in AND/OR
was correct (i.e. that NULL rather than false is returned if
expression doesn't return true).
Author: Andres Freund
A simple UNION ALL gets flattened into an appendrel of subquery
RTEs, but up until now it's been impossible for the appendrel to use
the partial paths for the subqueries, so we can implement the
appendrel as a Parallel Append but only one with non-partial paths
as children.
There are three separate obstacles to removing that limitation.
First, when planning a subquery, propagate any partial paths to the
final_rel so that they are potentially visible to outer query levels
(but not if they have initPlans attached, because that wouldn't be
safe). Second, after planning a subquery, propagate any partial paths
for the final_rel to the subquery RTE in the outer query level in the
same way we do for non-partial paths. Third, teach finalize_plan() to
account for the possibility that the fake parameter we use for rescan
signalling when the plan contains a Gather (Merge) node may be
propagated from an outer query level.
Patch by me, reviewed and tested by Amit Khandekar, Rajkumar
Raghuwanshi, and Ashutosh Bapat. Test cases based on examples by
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CA+Tgmoa6L9A1nNCk3aTDVZLZ4KkHDn1+tm7mFyFvP+uQPS7bAg@mail.gmail.com
The existing logic for updating pg_class.reltuples trusted the sampling
results only for the pages ANALYZE actually visited, preferring to
believe the previous tuple density estimate for all the unvisited pages.
While there's some rationale for doing that for VACUUM (first that
VACUUM is likely to visit a very nonrandom subset of pages, and second
that we know for sure that the unvisited pages did not change), there's
no such rationale for ANALYZE: by assumption, it's looked at an unbiased
random sample of the table's pages. Furthermore, in a very large table
ANALYZE will have examined only a tiny fraction of the table's pages,
meaning it cannot slew the overall density estimate very far at all.
In a table that is physically growing, this causes reltuples to increase
nearly proportionally to the change in relpages, regardless of what is
actually happening in the table. This has been observed to cause reltuples
to become so much larger than reality that it effectively shuts off
autovacuum, whose threshold for doing anything is a fraction of reltuples.
(Getting to the point where that would happen seems to require some
additional, not well understood, conditions. But it's undeniable that if
reltuples is seriously off in a large table, ANALYZE alone will not fix it
in any reasonable number of iterations, especially not if the table is
continuing to grow.)
Hence, restrict the use of vac_estimate_reltuples() to VACUUM alone,
and in ANALYZE, just extrapolate from the sample pages on the assumption
that they provide an accurate model of the whole table. If, by very bad
luck, they don't, at least another ANALYZE will fix it; in the old logic
a single bad estimate could cause problems indefinitely.
In HEAD, let's remove vac_estimate_reltuples' is_analyze argument
altogether; it was never used for anything and now it's totally pointless.
But keep it in the back branches, in case any third-party code is calling
this function.
Per bug #15005. Back-patch to all supported branches.
David Gould, reviewed by Alexander Kuzmenkov, cosmetic changes by me
Discussion: https://postgr.es/m/20180117164916.3fdcf2e9@engels
In databases with many tables, re-fetching the statistics takes some time,
so that this behavior seriously decreases the available concurrency for
multiple autovac workers. There's discussion afoot about more complete
fixes, but a simple and back-patchable amelioration is to claim the table
and release the lock before rechecking stats. If we find out there's no
longer a reason to process the table, re-taking the lock to un-claim the
table is cheap enough.
(This patch is quite old, but got lost amongst a discussion of more
aggressive fixes. It's not clear when or if such a fix will be
accepted, but in any case it'd be unlikely to get back-patched.
Let's do this now so we have some improvement for the back branches.)
In passing, make the normal un-claim step take AutovacuumScheduleLock
not AutovacuumLock, since that is what is documented to protect the
wi_tableoid field. This wasn't an actual bug in view of the fact that
readers of that field hold both locks, but it creates some concurrency
penalty against operations that need only AutovacuumLock.
Back-patch to all supported versions.
Jeff Janes
Discussion: https://postgr.es/m/26118.1520865816@sss.pgh.pa.us
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
CREATE TABLE / LIKE with a bigint identity column would fail on
platforms where long is 32 bits. Copying the sequence values used
makeInteger(), which would truncate the 64-bit sequence data to 32 bits.
To fix, use makeFloat() instead, like the parser. (This does not
actually make use of floats, but stores the values as strings.)
Bug: #15096
Reviewed-by: Michael Paquier <michael@paquier.xyz>
If a table containing a primary key is attach as partition to a
partitioned table which has a primary key with a different definition,
we would happily create a second one in the new partition. Oops. It
turns out that this is because an error check in DefineIndex is executed
only if you tell it that it's being run by ALTER TABLE, and the original
code here wasn't. Change it so that it does.
Added a couple of test cases for this, also. A previously working test
started to fail in a different way than before patch because the new
check is called earlier; change the PK to plain UNIQUE so that the new
behavior isn't invoked, so that the test continues to verify what we
want it to verify.
Reported by: Noriyoshi Shinoda
Discussion: https://postgr.es/m/DF4PR8401MB102060EC2615EC9227CC73F7EEDF0@DF4PR8401MB1020.NAMPRD84.PROD.OUTLOOK.COM
