GiST compress functions (like all GiST opclass functions) are
supposed to be called in short-lived memory contexts, so that
minor memory leaks in them are not of concern, and indeed
explicit pfree's are likely slightly counterproductive.
But this one in g_intbig_compress() is more than
slightly counterproductive, because it's guarded by
"if (in != DatumGetArrayTypeP(entry->key))" which means
that if this test succeeds, we've detoasted the datum twice.
(And to add insult to injury, the extra detoast result is
leaked.) Let's just drop the whole stanza, relying on the
GiST temporary context mechanism to clean up in good time.
The analogous bit in g_int_compress() is
if (r != (ArrayType *) DatumGetPointer(entry->key))
pfree(r);
which doesn't have the gratuitous-detoast problem so
I left it alone. Perhaps there is a case for removing
unnecessary pfree's more widely, but I'm not sure if it's
worth the code churn.
The potential extra decompress seems expensive enough to
justify calling this a (minor) performance bug and
back-patching.
Konstantin Knizhnik, Matthias van de Meent, Tom Lane
Discussion: https://postgr.es/m/CAEze2Wi86=DxErfvf+SCB2UKmU2amKOF60BKuJOX=w-RojRn0A@mail.gmail.com
As gist__int_ops stands in intarray, it is possible to store GiST
entries for leaf pages that can cause corruptions when decompressed.
Leaf nodes are stored as decompressed all the time by the compression
method, and the decompression method should map with that, retrieving
the contents of the page without doing any decompression. However, the
code authorized the insertion of leaf page data with a higher number of
array items than what can be supported, generating a NOTICE message to
inform about this matter (199 for a 8k page, for reference). When
calling the decompression method, a decompression would be attempted on
this leaf node item but the contents should be retrieved as they are.
The NOTICE message generated when dealing with the compression of a leaf
page and too many elements in the input array for gist__int_ops has been
introduced by 08ee64e, removing the marker stored in the array to track
if this is actually a leaf node. However, it also missed the fact that
the decompression path should do nothing for a leaf page. Hence, as the
code stand, a too-large array would be stored as uncompressed but the
decompression path would attempt a decompression rather that retrieving
the contents as they are.
This leads to various problems. First, even if 08ee64e tried to address
that, it is possible to do out-of-bound chunk writes with a large input
array, with the backend informing about that with WARNINGs. On
decompression, retrieving the stored leaf data would lead to incorrect
memory reads, leading to crashes or even worse.
Perhaps somebody would be interested in expanding the number of array
items that can be handled in a leaf page for this operator in the
future, which would require revisiting the choice done in 08ee64e, but
based on the lack of reports about this problem since 2005 it does not
look so. For now, this commit prevents the insertion of data for leaf
pages when using more array items that the code can handle on
decompression, switching the NOTICE message to an ERROR. If one wishes
to use more array items, gist__intbig_ops is an optional choice.
While on it, use ERRCODE_PROGRAM_LIMIT_EXCEEDED as error code when a
limit is reached, because that's what the module is facing in such
cases.
Author: Ankit Kumar Pandey, Alexander Lakhin
Reviewed-by: Richard Guo, Michael Paquier
Discussion: https://postgr.es/m/796b65c3-57b7-bddf-b0d5-a8afafb8b627@gmail.com
Discussion: https://postgr.es/m/17888-f72930e6b5ce8c14@postgresql.org
Backpatch-through: 11
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
contrib/intarray considers "arraycol <@ constant-array" to be indexable,
but its GiST opclass code fails to reliably find index entries for empty
array values (which of course should trivially match such queries).
This is because the test condition to see whether we should descend
through a non-leaf node is wrong.
Unfortunately, empty array entries could be anywhere in the index,
as these index opclasses are currently designed. So there's no way
to fix this except by lobotomizing <@ indexscans to scan the whole
index ... which is what this patch does. That's pretty unfortunate:
the performance is now actually worse than a seqscan, in most cases.
We'd be better off to remove <@ from the GiST opclasses entirely,
and perhaps a future non-back-patchable patch will do so.
In the meantime, applications whose performance is adversely impacted
have a couple of options. They could switch to a GIN index, which
doesn't have this bug, or they could replace "arraycol <@ constant-array"
with "arraycol <@ constant-array AND arraycol && constant-array".
That will provide about the same performance as before, and it will find
all non-empty subsets of the given constant-array, which is all that
could reliably be expected of the query before.
While at it, add some more regression test cases to improve code
coverage of contrib/intarray.
In passing, adjust resize_intArrayType so that when it's returning an
empty array, it uses construct_empty_array for that rather than
cowboy hacking on the input array. While the hack produces an array
that looks valid for most purposes, it isn't bitwise equal to empty
arrays produced by other code paths, which could have subtle odd
effects. I don't think this code path is performance-critical
enough to justify such shortcuts. (Back-patch this part only as far
as v11; before commit 01783ac36 we were not careful about this in
other intarray code paths either.)
Back-patch the <@ fixes to all supported versions, since this was
broken from day one.
Patch by me; thanks to Alexander Korotkov for review.
Discussion: https://postgr.es/m/458.1565114141@sss.pgh.pa.us
1. Integer overflow in internal_size could result in memory corruption
in decompression since a zero-length array would be allocated and then
written to. This leads to crashes or corruption when traversing an
index which has been populated with sufficiently sparse values. Fix by
using int64 for computations and checking for overflow.
2. Integer overflow in g_int_compress could cause pessimal merge
choices, resulting in unnecessarily large ranges (which would in turn
trigger issue 1 above). Fix by using int64 again.
3. Even without overflow, array sizes could become large enough to
cause unexplained memory allocation errors. Fix by capping the sizes
to a safe limit and report actual errors pointing at gist__intbig_ops
as needed.
4. Large inputs to the compression function always consist of large
runs of consecutive integers, and the compression loop was processing
these one at a time in an O(N^2) manner with a lot of overhead. The
expected runtime of this function could easily exceed 6 months for a
single call as a result. Fix by performing a linear-time first pass,
which reduces the worst case to something on the order of seconds.
Backpatch all the way, since this has been wrong forever.
Per bug #15518 from report from irc user "dymk", analysis and patch by
me.
Discussion: https://postgr.es/m/15518-799e426c3b4f8358@postgresql.org
Commit 716ea626a attempted to fix the problem of building 1-D zero-size
arrays once and for all. But it turns out that contrib/intarray has some
code that doesn't use construct_array() but just builds arrays by hand,
so it didn't get the memo. This appears to affect all of subarray(),
intset_subtract(), inner_int_union(), inner_int_inter(), and
intarray_concat_arrays().
Back-patch into v11. In the past we've not back-patched this type of
change, but since v11 is still in beta it seems all right to include
this fix in it. Besides it's more consistent to make the fix in v11
where 716ea626a appeared.
Report and patch by Alexey Kryuchkov, some cosmetic adjustments by me
Report: https://postgr.es/m/153053285112.13258.434620894305716755@wrigleys.postgresql.org
Discussion: https://postgr.es/m/CAN85JcYphDLYt4CpMDLZjjNVqGDrFJ5eS3YF=wLAhFoDQuBsyg@mail.gmail.com
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The parenthesized style has only been used in a few modules. Change
that to use the style that is predominant across the whole tree.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The mess cleaned up in commit da0759600 is clear evidence that it's a
bug hazard to expect the caller of get_attstatsslot()/free_attstatsslot()
to provide the correct type OID for the array elements in the slot.
Moreover, we weren't even getting any performance benefit from that,
since get_attstatsslot() was extracting the real type OID from the array
anyway. So we ought to get rid of that requirement; indeed, it would
make more sense for get_attstatsslot() to pass back the type OID it found,
in case the caller isn't sure what to expect, which is likely in binary-
compatible-operator cases.
Another problem with the current implementation is that if the stats array
element type is pass-by-reference, we incur a palloc/memcpy/pfree cycle
for each element. That seemed acceptable when the code was written because
we were targeting O(10) array sizes --- but these days, stats arrays are
almost always bigger than that, sometimes much bigger. We can save a
significant number of cycles by doing one palloc/memcpy/pfree of the whole
array. Indeed, in the now-probably-common case where the array is toasted,
that happens anyway so this method is basically free. (Note: although the
catcache code will inline any out-of-line toasted values, it doesn't
decompress them. At the other end of the size range, it doesn't expand
short-header datums either. In either case, DatumGetArrayTypeP would have
to make a copy. We do end up using an extra array copy step if the element
type is pass-by-value and the array length is neither small enough for a
short header nor large enough to have suffered compression. But that
seems like a very acceptable price for winning in pass-by-ref cases.)
Hence, redesign to take these insights into account. While at it,
convert to an API in which we fill a struct rather than passing a bunch
of pointers to individual output arguments. That will make it less
painful if we ever want further expansion of what get_attstatsslot can
pass back.
It's certainly arguable that this is new development and not something to
push post-feature-freeze. However, I view it as primarily bug-proofing
and therefore something that's better to have sooner not later. Since
we aren't quite at beta phase yet, let's put it in.
Discussion: https://postgr.es/m/16364.1494520862@sss.pgh.pa.us
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
I'd supposed that people would do this manually when creating new operator
classes, but the folly of that was exposed today. The tests seem fast
enough that we can just apply them during the normal regression tests.
contrib/isn fails the checks for lack of complete sets of cross-type
operators. That's a nice-to-have policy rather than a functional
requirement, so leave it as-is, but insert ORDER BY in the query to
ensure consistent cross-platform output.
Discussion: https://postgr.es/m/7076.1480446837@sss.pgh.pa.us
As implemented, -e ran an EXPLAIN but then discarded the output, which
certainly seems pointless. Make it print to stdout instead. It's been
like that forever, so back-patch to all supported branches.
Daniel Gustafsson, reviewed by Andreas Scherbaum
Patch: <B97BDCB7-A3B3-4734-90B5-EDD586941629@yesql.se>
Commit 749a787c5b25ae33b3d4da0ef12aa05214aa73c7 bumped the extension
version on all of these extensions already, and we haven't had a
release since then, so we can make further changes without bumping the
extension version again. Take this opportunity to mark all of the
functions exported by these modules PARALLEL SAFE -- except for
pg_trgm's set_limit(). Mark that one PARALLEL RESTRICTED, because it
makes a persistent change to a GUC value.
Note that some of the markings added by this commit don't have any
effect; for example, gseg_picksplit() isn't likely to be mentioned
explicitly in a query and therefore it's parallel-safety marking will
never be consulted. But this commit just marks everything for
consistency: if it were somehow used in a query, that would be fine as
far as parallel query is concerned, since it does not consult any
backend-private state, attempt to write data, etc.
Andreas Karlsson, with a few revisions by me.
In commits 9ff60273e35cad6e and dbe2328959e12701 I (tgl) fixed the
signatures of a bunch of contrib's GIN and GIST support functions so that
they would pass validation by the recently-added amvalidate functions.
The backend does not actually consult or check those signatures otherwise,
so I figured this was basically cosmetic and did not require an extension
version bump. However, Alexander Korotkov pointed out that that would
leave us in a pretty messy situation if we ever wanted to redefine those
functions later, because there wouldn't be a unique way to name them.
Since we're going to be bumping these extensions' versions anyway for
parallel-query cleanups, let's take care of this now.
Andreas Karlsson, adjusted for more search-path-safety by me
GIN had some minor issues too, mostly using "internal" where something
else would be more appropriate. I went with the same approach as in
9ff60273e35cad6e, namely preferring the opclass' indexed datatype for
arguments that receive an operator RHS value, even if that's not
necessarily what they really are.
Again, this is with an eye to having a uniform rule for ginvalidate()
to check support function signatures.
The conventions specified by the GiST SGML documentation were widely
ignored. For example, the strategy-number argument for "consistent" and
"distance" functions is specified to be a smallint, but most of the
built-in support functions declared it as an integer, and for that matter
the core code passed it using Int32GetDatum not Int16GetDatum. None of
that makes any real difference at runtime, but it's quite confusing for
newcomers to the code, and it makes it very hard to write an amvalidate()
function that checks support function signatures. So let's try to instill
some consistency here.
Another similar issue is that the "query" argument is not of a single
well-defined type, but could have different types depending on the strategy
(corresponding to search operators with different righthand-side argument
types). Some of the functions threw up their hands and declared the query
argument as being of "internal" type, which surely isn't right ("any" would
have been more appropriate); but the majority position seemed to be to
declare it as being of the indexed data type, corresponding to a search
operator with both input types the same. So I've specified a convention
that that's what to do always.
Also, the result of the "union" support function actually must be of the
index's storage type, but the documentation suggested declaring it to
return "internal", and some of the functions followed that. Standardize
on telling the truth, instead.
Similarly, standardize on declaring the "same" function's inputs as
being of the storage type, not "internal".
Also, somebody had forgotten to add the "recheck" argument to both
the documentation of the "distance" support function and all of their
SQL declarations, even though the C code was happily using that argument.
Clean that up too.
Fix up some other omissions in the docs too, such as documenting that
union's second input argument is vestigial.
So far as the errors in core function declarations go, we can just fix
pg_proc.h and bump catversion. Adjusting the erroneous declarations in
contrib modules is more debatable: in principle any change in those
scripts should involve an extension version bump, which is a pain.
However, since these changes are purely cosmetic and make no functional
difference, I think we can get away without doing that.
The tsquery, ltxtquery and query_int data types have a common ancestor.
Having acquired check_stack_depth() calls independently, each was
missing at least one call. Back-patch to 9.0 (all supported versions).
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
It's all very well to claim that a simplistic sort is fast in easy
cases, but O(N^2) in the worst case is not good ... especially if the
worst case is as easy to hit as "descending order input". Replace that
bit with our standard qsort.
Per bug #12866 from Maksym Boguk. Back-patch to all active branches.
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
Several functions, mostly type input functions, calculated an allocation
size such that the calculation wrapped to a small positive value when
arguments implied a sufficiently-large requirement. Writes past the end
of the inadvertent small allocation followed shortly thereafter.
Coverity identified the path_in() vulnerability; code inspection led to
the rest. In passing, add check_stack_depth() to prevent stack overflow
in related functions.
Back-patch to 8.4 (all supported versions). The non-comment hstore
changes touch code that did not exist in 8.4, so that part stops at 9.0.
Noah Misch and Heikki Linnakangas, reviewed by Tom Lane.
Security: CVE-2014-0064
Previously a one-dimensional empty array was returned, but its text
representation matched a zero-dimensional array, and there is no way to
dump/reload a one-dimensional empty array.
BACKWARD INCOMPATIBILITY
Per report from elein
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
The array intersection code would give wrong results if the first entry of
the correct output array would be "1". (I think only this value could be
at risk, since the previous word would always be a lower-bound entry with
that fixed value.)
Problem spotted by Julien Rouhaud, initial patch by Guillaume Lelarge,
cosmetic improvements by me.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
